March 2025 - Release-announce - lists.openstack.org

skyline-console 6.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for skyline-console for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/skyline-console/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/skyline-console/src/branch/stable/epoxy Release notes for skyline-console can be found at: https://docs.openstack.org/releasenotes/skyline-console/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/skyline-apiserver/+bugs and tag it *epoxy-rc-potential* to bring it to the skyline-console release crew's attention.

1 0

barbican 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for barbican for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/barbican/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/barbican/src/branch/stable/epoxy Release notes for barbican can be found at: https://docs.openstack.org/releasenotes/barbican/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/barbican/+bugs and tag it *epoxy-rc-potential* to bring it to the barbican release crew's attention.

1 0

skyline-apiserver 6.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for skyline-apiserver for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/skyline-apiserver/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/skyline-apiserver/src/branch/stable/epoxy Release notes for skyline-apiserver can be found at: https://docs.openstack.org/releasenotes/skyline-apiserver/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/skyline-apiserver/+bugs and tag it *epoxy-rc-potential* to bring it to the skyline-apiserver release crew's attention.

1 0

networking-bagpipe 22.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for networking-bagpipe for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-bagpipe/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/networking-bagpipe/src/branch/stable/epoxy Release notes for networking-bagpipe can be found at: https://docs.openstack.org/releasenotes/networking-bagpipe/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-bagpipe/+bugs and tag it *epoxy-rc-potential* to bring it to the networking-bagpipe release crew's attention.

1 0

adjutant-ui 10.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for adjutant-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/adjutant-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/adjutant-ui/src/branch/stable/epoxy Release notes for adjutant-ui can be found at: https://docs.openstack.org/releasenotes/adjutant-ui/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/adjutant-ui and tag it *epoxy-rc-potential* to bring it to the adjutant-ui release crew's attention.

1 0

neutron-dynamic-routing 26.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

Hello everyone, A new release candidate for neutron-dynamic-routing for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-dynamic-routing/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/neutron-dynamic-routing/src/branch/stable/epo… Release notes for neutron-dynamic-routing can be found at: https://docs.openstack.org/releasenotes/neutron-dynamic-routing/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *epoxy-rc-potential* to bring it to the neutron-dynamic-routing release crew's attention.

1 0

sushy-tools 2.0.0
by no-reply＠openstack.org 14 Mar '25

14 Mar '25

We are tickled pink to announce the release of: sushy-tools 2.0.0 The source is available from: https://opendev.org/openstack/sushy-tools Download the package from: https://tarballs.openstack.org/sushy-tools/ For more details, please see below. 2.0.0 ^^^^^ New Features ************ * The openstack driver for virtual media now supports Glance file upload. As an alternative to using image import via the "web- download" method, it is now possible to configure the emulator to download the image to a temp file which is then uploaded to Glance. Set the "SUSHY_EMULATOR_OS_VMEDIA_IMAGE_FILE_UPLOAD" option to "True" to enable Glance file upload. Upgrade Notes ************* * Support for Python 3.8 has been removed. Now the minimum python version supported is 3.9 . Changes in sushy-tools 1.3.0..2.0.0 ----------------------------------- 64348a6 Redefine libvirt domain on Restart 8f5b808 Openstack vmedia - refactor to pre-defined volumes ddcb838 OS vmedia: Update device on eject_image 504eaff nova driver - get_secure_boot volume boot 7dd7c13 Openstack - get/set_boot_image support volume boot 474443e Openstack - get_boot_mode support volume boot c4e8c52 OS vmedia - post rebuild ACTIVE + SHUTOFF is ok 9a5c119 Openstack - Raise SYS518 server.task_state != None de727cf Openstack vmedia - add glance file upload support ef58421 Import needed ironic-lib code bcd694e Minor docs changes for better readability and consistency b5c52e7 add pyproject.toml to support pip 23.1 7ca193c Add TLS option to external notifier 41b9683 Drop unnecessary 'x' bit from doc config file 152e7c5 Remove Python 3.8 support 84c1e8a Reject node power off requests to align with ironic supporting NCSI b75d4cd Update irrelevant-files for sushy-jobs Diffstat (except docs and test files) ------------------------------------- README.rst | 31 +- pyproject.toml | 3 + .../notes/remove-py38-ec073d8462e60e8b.yaml | 5 + ...dia-openstack-file-upload-8a6843d6d0b33772.yaml | 11 + requirements.txt | 5 +- setup.cfg | 6 +- setup.py | 2 +- sushy_tools/emulator/auth_basic.py | 201 ++++++++++++ sushy_tools/emulator/controllers/update_service.py | 2 +- sushy_tools/emulator/main.py | 8 +- .../emulator/resources/systems/fakedriver.py | 20 +- .../emulator/resources/systems/libvirtdriver.py | 3 +- .../emulator/resources/systems/novadriver.py | 307 +++++++++--------- sushy_tools/emulator/resources/vmedia.py | 148 +++++---- sushy_tools/error.py | 16 + .../emulator/resources/systems/test_libvirt.py | 3 +- .../unit/emulator/resources/systems/test_nova.py | 338 ++++++++------------ zuul.d/sushy-tools-jobs.yaml | 10 + 29 files changed, 1226 insertions(+), 695 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index b869ebc..33f200f 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9 +9 @@ -pbr!=2.1.0,>=2.0.0 # Apache-2.0 +pbr>=6.0.0 # Apache-2.0 @@ -13 +13,2 @@ tenacity>=6.2.0 # Apache-2.0 -ironic-lib>=4.6.1 # Apache-2.0 +bcrypt>=3.1.3 # Apache-2.0 +WebOb>=1.7.1 # MIT

1 0

storlets 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for storlets for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/storlets/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/storlets/src/branch/stable/epoxy Release notes for storlets can be found at: https://docs.openstack.org/releasenotes/storlets/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/storlets/+bugs and tag it *epoxy-rc-potential* to bring it to the storlets release crew's attention.

1 0

zaqar 20.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zaqar for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zaqar/src/branch/stable/epoxy Release notes for zaqar can be found at: https://docs.openstack.org/releasenotes/zaqar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar/+bugs and tag it *epoxy-rc-potential* to bring it to the zaqar release crew's attention.

1 0

watcher 14.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for watcher for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/watcher/src/branch/stable/epoxy Release notes for watcher can be found at: https://docs.openstack.org/releasenotes/watcher/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/watcher/+bugs and tag it *epoxy-rc-potential* to bring it to the watcher release crew's attention.

1 0

kuryr-libnetwork 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for kuryr-libnetwork for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/kuryr-libnetwork/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/kuryr-libnetwork/src/branch/stable/epoxy Release notes for kuryr-libnetwork can be found at: https://docs.openstack.org/releasenotes/kuryr-libnetwork/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/kuryr-libnetwork/+bugs and tag it *epoxy-rc-potential* to bring it to the kuryr-libnetwork release crew's attention.

1 0

openstack-ansible 30.0.2 (dalmatian)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

We are ecstatic to announce the release of: openstack-ansible 30.0.2 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. 30.0.2 ^^^^^^ Upgrade Notes ************* * A uWSGI for Neutron has been disabled again by default in favor of eventlet server. This also stops and disables following services needed for uWSGI mode: * "neutron-periodic-workers" * "neutron-ovn-maintenance-worker" * "neutron-rpc-server" Bug Fixes ********* * A bug #2096937 (https://bugs.launchpad.net/openstack- ansible/+bug/2096937) related to HashRing generation has been reported when using uWSGI with Neutron. In order to quickly address the bug, uWSGI mode has been disabled again by default for Neutron until a proper fix is provided for uWSGI. Changes in openstack-ansible 30.0.1..30.0.2 ------------------------------------------- d2d92f592 Update haproxy and rabbitmq SHA ae6610bec Bump SHAs for 2024.2 d492b9ffd docs: adjust rabbitmq quorum queue guidance for 2024.2 onwards 55bacc3ea Remove ansible-role-qdrouterd from zuul required-projects 311767812 Fix inventory adjustment for legacy container naming Diffstat (except docs and test files) ------------------------------------- ansible-collection-requirements.yml | 2 +- ansible-role-requirements.yml | 32 +++++++++++----------- inventory/group_vars/all/source_git.yml | 4 +-- inventory/group_vars/cinder_all/source_git.yml | 4 +-- inventory/group_vars/designate_all/source_git.yml | 4 +-- inventory/group_vars/glance_all/source_git.yml | 4 +-- inventory/group_vars/horizon_all/source_git.yml | 6 ++-- inventory/group_vars/ironic_all/source_git.yml | 4 +-- inventory/group_vars/manila_all/source_git.yml | 4 +-- inventory/group_vars/neutron_all/source_git.yml | 8 +++--- inventory/group_vars/nova_all/source_git.yml | 6 ++-- inventory/group_vars/octavia_all/source_git.yml | 6 ++-- inventory/group_vars/placement_all/source_git.yml | 4 +-- inventory/group_vars/trove_all/source_git.yml | 4 +-- osa_toolkit/generate.py | 5 ++-- .../neutron_uwsgi_re_disable-45f28da6a4e29e54.yaml | 17 ++++++++++++ zuul.d/jobs.yaml | 1 - 18 files changed, 71 insertions(+), 56 deletions(-)

1 0

zaqar-ui 18.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zaqar-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zaqar-ui/src/branch/stable/epoxy Release notes for zaqar-ui can be found at: https://docs.openstack.org/releasenotes/zaqar-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar-ui/+bugs and tag it *epoxy-rc-potential* to bring it to the zaqar-ui release crew's attention.

1 0

zun-ui 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zun-ui for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zun-ui/src/branch/stable/epoxy Release notes for zun-ui can be found at: https://docs.openstack.org/releasenotes/zun-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun-ui/+bugs and tag it *epoxy-rc-potential* to bring it to the zun-ui release crew's attention.

1 0

zun 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for zun for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/zun/src/branch/stable/epoxy Release notes for zun can be found at: https://docs.openstack.org/releasenotes/zun/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun/+bugs and tag it *epoxy-rc-potential* to bring it to the zun release crew's attention.

1 0

openstack-ansible 29.2.2 (caracal)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

We high-spiritedly announce the release of: openstack-ansible 29.2.2 This release is part of the caracal release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. 29.2.2 ^^^^^^ Prelude As part of our regular maintenance cycle, this release updates versions of roles and services to their latest versions. Please be aware that bug fixes originating from other projects within the OpenStack are not listed in these release notes. Changes in openstack-ansible 29.2.1..29.2.2 ------------------------------------------- f09a40b4e Bump SHAs for 2024.1 9dacde62b Remove ansible-role-qdrouterd from zuul required-projects Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 16 ++++++++-------- inventory/group_vars/cinder_all/source_git.yml | 4 ++-- inventory/group_vars/designate_all/source_git.yml | 4 ++-- inventory/group_vars/horizon_all/source_git.yml | 6 +++--- inventory/group_vars/ironic_all/source_git.yml | 4 ++-- inventory/group_vars/keystone_all/source_git.yml | 4 ++-- inventory/group_vars/manila_all/source_git.yml | 4 ++-- inventory/group_vars/neutron_all/source_git.yml | 8 ++++---- inventory/group_vars/nova_all/source_git.yml | 6 +++--- inventory/group_vars/octavia_all/source_git.yml | 6 +++--- inventory/group_vars/trove_all/source_git.yml | 4 ++-- releasenotes/notes/2024.1_bump-cd5e21598b01a58b.yaml | 6 ++++++ zuul.d/jobs.yaml | 1 - 13 files changed, 39 insertions(+), 34 deletions(-)

1 0

keystone 27.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for keystone for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/keystone/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/keystone/src/branch/stable/epoxy Release notes for keystone can be found at: https://docs.openstack.org/releasenotes/keystone/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/keystone/+bugs and tag it *epoxy-rc-potential* to bring it to the keystone release crew's attention.

1 0

blazar-dashboard 13.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for blazar-dashboard for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/blazar-dashboard/src/branch/stable/epoxy Release notes for blazar-dashboard can be found at: https://docs.openstack.org/releasenotes/blazar-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *epoxy-rc-potential* to bring it to the blazar-dashboard release crew's attention.

1 0

blazar 15.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for blazar for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/blazar/src/branch/stable/epoxy Release notes for blazar can be found at: https://docs.openstack.org/releasenotes/blazar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *epoxy-rc-potential* to bring it to the blazar release crew's attention.

1 0

cyborg 14.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for cyborg for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cyborg/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/cyborg/src/branch/stable/epoxy Release notes for cyborg can be found at: https://docs.openstack.org/releasenotes/cyborg/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/openstack-cyborg/+bugs and tag it *epoxy-rc-potential* to bring it to the cyborg release crew's attention.

1 0

tacker-horizon 11.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for tacker-horizon for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/tacker-horizon/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/tacker-horizon/src/branch/stable/epoxy Release notes for tacker-horizon can be found at: https://docs.openstack.org/releasenotes/tacker-horizon/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/tacker/+bugs and tag it *epoxy-rc-potential* to bring it to the tacker-horizon release crew's attention.

1 0

blazar-nova 7.0.0.0rc1 (epoxy)
by no-reply＠openstack.org 13 Mar '25

13 Mar '25

Hello everyone, A new release candidate for blazar-nova for the end of the Epoxy cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-nova/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Epoxy release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/epoxy release branch at: https://opendev.org/openstack/blazar-nova/src/branch/stable/epoxy Release notes for blazar-nova can be found at: https://docs.openstack.org/releasenotes/blazar-nova/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *epoxy-rc-potential* to bring it to the blazar-nova release crew's attention.

1 0

taskflow 5.12.0 (epoxy)
by no-reply＠openstack.org 10 Mar '25

10 Mar '25

We high-spiritedly announce the release of: taskflow 5.12.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/taskflow Download the package from: https://pypi.org/project/taskflow Please report issues through: https://bugs.launchpad.net/taskflow/+bugs For more details, please see below. 5.12.0 ^^^^^^ Deprecation Notes * Eventlet usages are deprecated and the removal of Eventlet from OpenStack is planned (https://governance.openstack.org/tc//goals/proposed/remove- eventlet.html), for this reason the eventlet_utils module is now deprecated. The support of Eventlet will be soon removed from taskflow. Please start considering removing your internal Eventlet usages and start migrating your stack. Changes in taskflow 5.11.0..5.12.0 ---------------------------------- 6ce78a47 Deprecate utility for eventlet Diffstat (except docs and test files) ------------------------------------- releasenotes/notes/deprecate-eventlet-df4a34a7d56acc47.yaml | 10 ++++++++++ requirements.txt | 3 +++ taskflow/utils/eventlet_utils.py | 2 ++ 3 files changed, 15 insertions(+) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 784bc45c..7a916f7d 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9,0 +10,3 @@ pbr>=2.0.0 # Apache-2.0 +# For deprecation warning +debtcollector>=1.2.0 # Apache-2.0 +

1 0

ironic-python-agent-builder 6.0.0 (epoxy)
by no-reply＠openstack.org 07 Mar '25

07 Mar '25

We are satisfied to announce the release of: ironic-python-agent-builder 6.0.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/ironic-python-agent-builder Download the package from: https://tarballs.openstack.org/ironic-python-agent-builder/ Please report issues through: https://bugs.launchpad.net/ironic-python-agent-builder/+bugs For more details, please see below. 6.0.0 ^^^^^ New Features * Changes lzma compression level to 9 for smaller images. Changes in ironic-python-agent-builder 5.4.0..6.0.0 --------------------------------------------------- 0b3f3dc fix: Adds bsdextrautils package for Debian which provides hexdump command 36b5e11 More reliable TinyIPA builds with network retries f340ae3 Change to maximum compression level when using lzma 142834e Prevent service restart while in 'rescued' state 46a8e01 Remove unnecessary firmware from deploy image 2cab2e4 Deprecate ironic-lib ef33cc8 Move jobs and DIB builds to ubuntu noble d6008a9 reno: Update master for unmaintained/2023.1 8a27cf7 Fix vmedia network config drive handling ac07c36 Drop unnecessary 'x' bit from doc config file a23d3d0 Update master for stable/2024.2 Diffstat (except docs and test files) ------------------------------------- .../environment.d/10-defaults.bash | 6 +- .../60-ironic-python-agent-ramdisk-install | 7 -- .../ironic-python-agent.service | 1 + .../package-installs.yaml | 5 ++ .../post-install.d/80-ironic-python-agent-ramdisk | 2 +- .../source-repository-ironic-lib | 1 - .../bin/ironic-python-agent-resolve-configdrive.sh | 2 +- ironic_python_agent_builder/__init__.py | 2 +- playbooks/ironic-python-agent-build-image/pre.yaml | 4 + playbooks/ironic-python-agent-build-image/run.yaml | 3 + .../lzma-compression-level-1ca346ba8d5b905a.yaml | 4 + releasenotes/source/2023.1.rst | 2 +- releasenotes/source/2024.2.rst | 6 ++ releasenotes/source/index.rst | 1 + tinyipa/build-tinyipa.sh | 95 ++++++++++++++++------ zuul.d/ironic-python-agent-builder-jobs.yaml | 10 +-- 20 files changed, 109 insertions(+), 71 deletions(-)

1 0

glance_store 4.8.2 (dalmatian)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are overjoyed to announce the release of: glance_store 4.8.2 This release is part of the dalmatian release series. The source is available from: https://opendev.org/openstack/glance_store Download the package from: https://pypi.org/project/glance_store For more details, please see below. 4.8.2 ^^^^^ Bug Fixes * Cinder (Dell PowerFlex) bug #2086759 (https://bugs.launchpad.net /glance-store/+bug/2086759): Fixed issue when downloading an image. Previously, we used to fail trying to download an image when using Glance -> Cinder -> Dell PowerFlex configuration which is now fixed with better file handling for the volume device. Changes in glance_store 4.8.1..4.8.2 ------------------------------------ 6182b2b Add interface to get store weight from memory 1396931 Cinder PowerFlex: Fix issue when downloading image aeac1d7 S3: add option to specify a custom CA cert bundle ca99182 Update TOX_CONSTRAINTS_FILE for stable/2024.2 35ef492 Update .gitreview for stable/2024.2 Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + glance_store/_drivers/cinder/scaleio.py | 16 +++++--- glance_store/_drivers/s3.py | 28 ++++++++++--- glance_store/multi_backend.py | 28 +++++++++++++ ...ix-scaleio-download-image-2563cb2681895d0e.yaml | 9 +++++ tox.ini | 6 +-- 11 files changed, 164 insertions(+), 49 deletions(-)

1 0

python-magnumclient 4.8.1 (epoxy)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are tickled pink to announce the release of: python-magnumclient 4.8.1 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-magnumclient Download the package from: https://pypi.org/project/python-magnumclient Please report issues through: https://bugs.launchpad.net/python-magnumclient/+bugs For more details, please see below. Changes in python-magnumclient 4.8.0..4.8.1 ------------------------------------------- ecdcc06 [FIX]: check_hostname requires server_hostname in Magnum client Diffstat (except docs and test files) ------------------------------------- magnumclient/common/httpclient.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

1 0

python-manilaclient 5.4.0 (epoxy)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are amped to announce the release of: python-manilaclient 5.4.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-manilaclient Download the package from: https://pypi.org/project/python-manilaclient Please report issues through: https://bugs.launchpad.net/python-manilaclient/+bugs For more details, please see below. Changes in python-manilaclient 5.3.0..5.4.0 ------------------------------------------- 6f725e0 bump osc-lib in requirements Diffstat (except docs and test files) ------------------------------------- requirements.txt | 2 +- 2 files changed, 5 insertions(+), 6 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 7faa70e..643648e 100644 --- a/requirements.txt +++ b/requirements.txt @@ -13 +13 @@ requests>=2.14.2 # Apache-2.0 -osc-lib>=1.10.0 # Apache-2.0 +osc-lib>=3.2.0 # Apache-2.0

1 0

python-blazarclient 4.3.0 (epoxy)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are happy to announce the release of: python-blazarclient 4.3.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-blazarclient Download the package from: https://pypi.org/project/python-blazarclient Please report issues through: https://bugs.launchpad.net/blazar/+bugs For more details, please see below. Changes in python-blazarclient 4.2.0..4.3.0 ------------------------------------------- b11d1df Drop access to iteritems Diffstat (except docs and test files) ------------------------------------- blazarclient/utils.py | 2 -- 1 file changed, 2 deletions(-)

1 0

bifrost 19.2.0 (epoxy)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are psyched to announce the release of: bifrost 19.2.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/bifrost Download the package from: https://tarballs.openstack.org/bifrost/ Please report issues through: https://bugs.launchpad.net/bifrost/+bugs For more details, please see below. 19.2.0 ^^^^^^ New Features ************ * Adds support for Ubuntu 24.04. Upgrade Notes ************* * When creating a virtual testing environment on newer distributions such as Ubuntu 24.04, UEFI firmware with 4M flash storage will be used. Existing virtual machines may need to be migrated if they were created on an older distribution. * Ubuntu Bionic support has been officially removed. * Python 3.8 support was dropped. The minimum version of Python now supported is Python 3.9. Bug Fixes ********* * Fixes an issue with checksum verification when setting "upstream_deploy_image_distribution" to "rocky" or "cirros". * Switches to using the latest CentOS Stream 9 generic cloud image as the old pinned version no longer exists. Changes in bifrost 19.1.0..19.2.0 --------------------------------- e0272c25 Remove ubuntu bionic support leftovers e641f7e1 Update `uuid` to `id` in node_info to match module change 196a5876 Fix typo in CLI parameter spefifying config drive. bf14155b Fix ansible linters 27011e03 Remove workaround for installing Ussuri and older fee32be3 CI: Update previous release for upgrade jobs 10be6e79 Add support for Ubuntu 24.04 image download 76f82acf Use python version to set DEFAULT_PIP_ANSIBLE 2d6ccc2b reno: Update master for unmaintained/2023.1 0b1cde92 Add support for Ubuntu 24.04 e631249a Remove Python 3.8 support 2b826730 Switches to using CentOS Stream latest 7446da03 Fix checksum parsing for Cirros and Rocky Linux f6762691 Update master for stable/2024.2 f1a66325 CI: pin the benchmark job to ubuntu-jammy Diffstat (except docs and test files) ------------------------------------- .../bifrost-deploy-nodes-dynamic/tasks/main.yml | 2 +- .../roles/bifrost-ironic-install/defaults/main.yml | 13 +++++------ .../tasks/download_deployment_image.yml | 6 ++++- .../templates/ironic.conf.j2 | 2 -- .../fixes-checksum-parsing-82c04ff1bb575c51.yaml | 6 +++++ releasenotes/notes/noble-502c2b04a5173d42.yaml | 10 +++++++++ .../notes/remove-bionic-bits-dd1c5964462576c4.yaml | 4 ++++ .../notes/remove-py38-2daf382101210c4e.yaml | 5 +++++ ...to-centos-stream-9-latest-2b42498ea98c5e2e.yaml | 5 +++++ releasenotes/source/2023.1.rst | 2 +- releasenotes/source/2024.2.rst | 6 +++++ releasenotes/source/index.rst | 1 + requirements.txt | 2 -- scripts/env-setup.sh | 19 ++++++++-------- setup.cfg | 6 ++--- tools/ansible-lint.sh | 2 +- zuul.d/bifrost-jobs.yaml | 26 +++++++++++++++++----- zuul.d/project.yaml | 6 +++++ 21 files changed, 93 insertions(+), 40 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 90757a1a..05889903 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9,2 +8,0 @@ passlib>=1.7.2 # BSD -# TODO(dtantsur): remove pyOpenSSL when we no longer support Bionic -pyOpenSSL>=18.0.0 # Apache-2.0

1 0

python-aodhclient 3.7.1 (epoxy)
by no-reply＠openstack.org 06 Mar '25

06 Mar '25

We are satisfied to announce the release of: python-aodhclient 3.7.1 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-aodhclient Download the package from: https://pypi.org/project/python-aodhclient Please report issues through: https://bugs.launchpad.net/python-aodhclient/+bugs For more details, please see below. Changes in python-aodhclient 3.7.0..3.7.1 ----------------------------------------- 040249d Switch to openstack-k8s-operators/sg-core 092572d reno: Update master for unmaintained/2023.1 ab0e370 zuul: Use telemetry queue Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 5 +++-- releasenotes/source/2023.1.rst | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-)

1 0

python-cinderclient 9.7.0 (epoxy)
by no-reply＠openstack.org 04 Mar '25

04 Mar '25

We are chuffed to announce the release of: python-cinderclient 9.7.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-cinderclient Download the package from: https://pypi.org/project/python-cinderclient Please report issues through: https://bugs.launchpad.net/python-cinderclient/+bugs For more details, please see below. 9.7.0 ^^^^^ Upgrade Notes ************* * Support for Python 3.8 has been removed. Now the minimum python version supported is 3.9 . Bug Fixes ********* * Bug #2035372 (https://bugs.launchpad.net/python- cinderclient/+bug/2035372): Fixed not honoring "http_log_debug" parameter in "cinderclient.client.Client" when also providing a session. Changes in python-cinderclient 9.6.0..9.7.0 ------------------------------------------- 3a5a041 Remove Python 3.8 support a0aaed8 Adapt unit tests to keystoneauth 5.9.0 9df662e Use time.sleep() instead of eventlet.sleep() 0549d6d Fix outdated notes in requirement files 3120454 Fix the pep8 error on Noble ed0b6a7 reno: Update master for unmaintained/2023.1 125e3d7 Fix pdf doc build 01f0aa1 Update master for stable/2024.2 ccbb9ea Fixed request logging Diffstat (except docs and test files) ------------------------------------- cinderclient/client.py | 9 ++++--- cinderclient/v3/volumes_base.py | 7 ++--- .../notes/http_log_debug-ff023f069afde3fe.yaml | 7 +++++ .../notes/remove-py38-9ff5e159cfa29d23.yaml | 5 ++++ releasenotes/source/2023.1.rst | 2 +- releasenotes/source/2024.2.rst | 6 +++++ releasenotes/source/index.rst | 1 + requirements.txt | 8 +++--- setup.cfg | 3 ++- test-requirements.txt | 6 +---- tox.ini | 2 +- 17 files changed, 74 insertions(+), 37 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 054f367..8cea5ad 100644 --- a/requirements.txt +++ b/requirements.txt @@ -1,3 +1,3 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. @@ -6 +6 @@ PrettyTable>=0.7.2 # BSD -keystoneauth1>=5.0.0 # Apache-2.0 +keystoneauth1>=5.9.0 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index 0886bd1..a898b7b 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1,3 +0,0 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. @@ -5,2 +2 @@ - -hacking>=4.0.0,<4.1.0 # Apache-2.0 +hacking>=7.0.0,<7.1.0 # Apache-2.0

1 0

python-manilaclient 5.3.0 (epoxy)
by no-reply＠openstack.org 03 Mar '25

03 Mar '25

We exuberantly announce the release of: python-manilaclient 5.3.0 This release is part of the epoxy release series. The source is available from: https://opendev.org/openstack/python-manilaclient Download the package from: https://pypi.org/project/python-manilaclient Please report issues through: https://bugs.launchpad.net/python-manilaclient/+bugs For more details, please see below. 5.3.0 ^^^^^ New Features * The "access_level" attributes of share access rule (of access type "ip") can be updated with API version "2.88" and beyond. Changes in python-manilaclient 5.2.0..5.3.0 ------------------------------------------- f833ab2 Run OSC plugin jobs 97cfa8e Add pre-commit 3f810f2 Remove unused Babel c06f3dc Allow to update access rule for type 'ip' Diffstat (except docs and test files) ------------------------------------- .pre-commit-config.yaml | 39 +++++ manilaclient/api_versions.py | 2 +- manilaclient/osc/v2/share_access_rules.py | 41 ++++- .../functional/osc/test_share_access_rules.py | 20 ++- manilaclient/v2/share_access_rules.py | 20 ++- ...-share-group-type-by-name-3a8760522c147f28.yaml | 0 ...ups-share-group-snapshots-20ec1dfcc0a7e81c.yaml | 2 +- ...ess-level-for-access-rule-adb5d572454c01e8.yaml | 5 + requirements.txt | 1 - test-requirements.txt | 4 +- tox.ini | 5 +- zuul.d/project.yaml | 1 + 18 files changed, 144 insertions(+), 218 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 4cf1cf7..7faa70e 100644 --- a/requirements.txt +++ b/requirements.txt @@ -13 +12,0 @@ requests>=2.14.2 # Apache-2.0 -Babel>=2.5.0 # BSD diff --git a/test-requirements.txt b/test-requirements.txt index ea299ae..79d7022 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1,3 +1 @@ -hacking>=6.1.0,<6.2.0 # Apache-2.0 - -coverage>=4.4.1 # Apache-2.0 +coverage!=4.4,>=4.0 # Apache-2.0

1 0