February 2023 - Release-announce - lists.openstack.org

zaqar-ui 14.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for zaqar-ui for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/zaqar-ui/src/branch/stable/antelope Release notes for zaqar-ui can be found at: https://docs.openstack.org/releasenotes/zaqar-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar-ui/+bugs and tag it *antelope-rc-potential* to bring it to the zaqar-ui release crew's attention.

1 0

masakari-dashboard 8.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for masakari-dashboard for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/masakari-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/masakari-dashboard/src/branch/stable/antelope Release notes for masakari-dashboard can be found at: https://docs.openstack.org/releasenotes/masakari-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/masakari/+bugs and tag it *antelope-rc-potential* to bring it to the masakari-dashboard release crew's attention.

1 0

blazar 11.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for blazar for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/blazar/src/branch/stable/antelope Release notes for blazar can be found at: https://docs.openstack.org/releasenotes/blazar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *antelope-rc-potential* to bring it to the blazar release crew's attention.

1 0

blazar-dashboard 9.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for blazar-dashboard for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/blazar-dashboard/src/branch/stable/antelope Release notes for blazar-dashboard can be found at: https://docs.openstack.org/releasenotes/blazar-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *antelope-rc-potential* to bring it to the blazar-dashboard release crew's attention.

1 0

python-watcher 10.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for python-watcher for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/python-watcher/src/branch/stable/antelope Release notes for python-watcher can be found at: https://docs.openstack.org/releasenotes/watcher/

1 0

masakari-monitors 15.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for masakari-monitors for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/masakari-monitors/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/masakari-monitors/src/branch/stable/antelope Release notes for masakari-monitors can be found at: https://docs.openstack.org/releasenotes/masakari-monitors/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/masakari-monitors/+bugs and tag it *antelope-rc-potential* to bring it to the masakari-monitors release crew's attention.

1 0

freezer-dr 14.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for freezer-dr for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer-dr/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/freezer-dr/src/branch/stable/antelope Release notes for freezer-dr can be found at: https://docs.openstack.org/releasenotes/freezer-dr/

1 0

openstack-cyborg 10.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for openstack-cyborg for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cyborg/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/openstack-cyborg/src/branch/stable/antelope Release notes for openstack-cyborg can be found at: https://docs.openstack.org/releasenotes/cyborg/

1 0

freezer-web-ui 14.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for freezer-web-ui for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer-web-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/freezer-web-ui/src/branch/stable/antelope Release notes for freezer-web-ui can be found at: https://docs.openstack.org/releasenotes/freezer-web-ui/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/freezer-web-ui and tag it *antelope-rc-potential* to bring it to the freezer-web-ui release crew's attention.

1 0

zaqar 16.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for zaqar for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/zaqar/src/branch/stable/antelope Release notes for zaqar can be found at: https://docs.openstack.org/releasenotes/zaqar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar/+bugs and tag it *antelope-rc-potential* to bring it to the zaqar release crew's attention.

1 0

freezer 14.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for freezer for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/freezer/src/branch/stable/antelope Release notes for freezer can be found at: https://docs.openstack.org/releasenotes/freezer/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/freezer and tag it *antelope-rc-potential* to bring it to the freezer release crew's attention.

1 0

watcher-dashboard 9.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for watcher-dashboard for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/watcher-dashboard/src/branch/stable/antelope Release notes for watcher-dashboard can be found at: https://docs.openstack.org/releasenotes/watcher-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/watcher-dashboard/+bugs and tag it *antelope-rc-potential* to bring it to the watcher-dashboard release crew's attention.

1 0

freezer-api 14.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for freezer-api for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/freezer-api/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/freezer-api/src/branch/stable/antelope Release notes for freezer-api can be found at: https://docs.openstack.org/releasenotes/freezer-api/

1 0

blazar-nova 3.0.0.0rc1 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

Hello everyone, A new release candidate for blazar-nova for the end of the Antelope cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-nova/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Antelope release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/antelope release branch at: https://opendev.org/openstack/blazar-nova/src/branch/stable/antelope Release notes for blazar-nova can be found at: https://docs.openstack.org/releasenotes/blazar-nova/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *antelope-rc-potential* to bring it to the blazar-nova release crew's attention.

1 0

tempest 34.0.0 (antelope)
by no-reply＠openstack.org 28 Feb '23

28 Feb '23

We are tickled pink to announce the release of: tempest 34.0.0: OpenStack Integration Testing This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/tempest Download the package from: https://pypi.org/project/tempest Please report issues through: https://bugs.launchpad.net/tempest/+bugs For more details, please see below. 34.0.0 ^^^^^^ Prelude ******* Adding placement service for config options "enforce_scope" so that we can switch the scope and new defaults enforcement for placement service. This release is to tag Tempest for OpenStack 2023.1 release. This release marks the start of 2023.1 release support in Tempest. After this release, Tempest will support below OpenStack Releases: * 2023.1 * Zed * Yoga * Xena Current development of Tempest is for OpenStack 2023.2 development cycle. Every Tempest commit is also tested against master during the 2023.2 cycle. However, this does not necessarily mean that using Tempest as of this tag will work against a 2023.2 (or future release) cloud. To be on safe side, use this tag to test the OpenStack 2023.1 release. New Features ************ * Adds a "ssh_allow_agent" parameter to the "RemoteClient" class wrapper and the direct ssh "Client" class to allow a caller to explicitly request that the SSH Agent is not consulted for authentication. This is useful if your attempting explicit password based authentication as "paramiko", the underlying library used for SSH, defaults to utilizing an ssh-agent process before attempting password authentication. Bug Fixes ********* * There was a bug (bug#1964509) in dynamic credentials creation where project credentials with different roles are created with the new projects. Credential of different role of projects must be created within the same project. For exmaple, 'project_admin', 'project_member', 'project_reader', and 'primary', credentials will be created in the same projects. 'alt', 'project_alt_admin', 'project_alt_member', 'project_alt_reader' will be created within the same project. 'admin' credenatials is considered and kept as legacy admin and will be created under new project. If any test want to test with admin role in projectA and non-admin/admin in projectB then test can request projectA admin using 'admin' or 'project_alt_admin' and non- admin in projectB using 'primary', 'project_member', or 'project_reader'/admin in projectB using 'project_admin'. Many existing tests using the 'admin' with new project to assert on the resource list so we are keeping 'admin' a kind of legacy admin. Changes in tempest wallaby-last..34.0.0 --------------------------------------- 58a1047d5 Use stable constraint in tox to release new tag for 2023.1 50d52e239 Add releasenote to tag the Tempest for 2023.1 release ec893e382 Add doc for multinode attribute 40ba550c3 Avoid long wait for volume detach in some tests d2d34f501 Change order of server/volume in snapshot test 4091e98d1 Use project_reader in server test 35fc95dbd Fix creation of requested creds within the same project aeacd8c92 Log console on failure to delete attachment 11d4fc9e4 Fix tempest-full-py3 for stable/ussuri to wallaby 9d11ac114 Allow capital letters in mac address regex f235785a7 Allow float value when overriding downtime 1062a8ddd Add periodic job to experimental queue d869e3acd Use MYSQL_REDUCE_MEMORY in some periodic jobs 6833a56f2 Add retries to more glance location tests 199ea6525 Use assertLessEqual for downtime validation 2d2cfac57 Enable bridge flows and tcpdump in tempest multinode 61194b73d Revert "Mark tempest-multinode-full-py3 as n-v" 518e426ab Separate the extra tests to run in a separate job e2183ca8f Minimize the tests footprint in multinode job 6bb98c2aa Prepare tempest-slow-parallel job and run periodically a9bad0051 Move a few jobs to periodic 1ae54e331 Fix retry_bad_request() context manager 517563fde Mark tempest-multinode-full-py3 as n-v 81ed09c05 Retry glance add/update locations on BadRequest 31afd4e57 Do not run openstacksdk-functional-devstack on victoria b3da2e19c Mark test_minimum_basic_instance_hard_reboot_after_vol_snap_deletion as slow test a6614d38d Allow SSH connection callers to not permit agent usage e17f1d366 Do not run openstacksdk-functional-devstack on wallaby f047361da Fix escaping of regular expressions in tox.ini bd6481d93 Fix default values for variables in run-tempest role f336efb70 Move test_dhcp_port_status_active from neutron-tempest-plugin 51a5d4f23 Use UPPER_CONSTRAINTS_FILE for stable/wallaby testing 2c192f46d Chunked GET request support b40d2d55b tempest cleanup - don't initialize admin id's e72ce4145 Remove leftover todo related to the dhcpcd support 4e4a43ee3 Restore IP addresses configuration after spoofing MAC address 49163f915 Add support for dhcpcd in the renew_lease method a6b7e334c Skip test_attach_scsi_disk_with_config_drive dfb304355 Introduce @serial test execution decorator 3cafeddfe Add release notes page for version 33.0.0 ea6644ce4 Fix tox4 error c5ff86b61 Enable placement scope and new defaults in rbac test job 5c075ccef Switch back the tox constraint to master b6521a831 Add placement service in 'enforce_scope' config b8f0c30f9 zuul: Increase timeout for c9s-fips job bec2d4daa Added functionality to wait for port creation be19f2181 Remove references to 'all-plugin' tox environment 951b80634 Decorate volume.base functions - fix cleanup Diffstat (except docs and test files) ------------------------------------- HACKING.rst | 16 +- .../add-ssh-allow-agent-2dee6448fd250e50.yaml | 10 + .../enforce_scope_placement-47a12c741e330f60.yaml | 4 + .../notes/fix-bug-1964509-b742f2c95d854980.yaml | 19 ++ .../tempest-2023-1-release-b18a240afadae8c9.yaml | 17 ++ releasenotes/source/index.rst | 1 + releasenotes/source/v33.0.0.rst | 5 + requirements.txt | 1 + roles/run-tempest-26/README.rst | 4 +- roles/run-tempest-26/tasks/main.yaml | 4 +- roles/run-tempest/README.rst | 4 +- roles/run-tempest/tasks/main.yaml | 11 +- tempest/api/compute/admin/test_live_migration.py | 6 + tempest/api/compute/admin/test_migrations.py | 2 + .../compute/admin/test_servers_on_multinodes.py | 6 + tempest/api/compute/admin/test_volume.py | 26 ++- tempest/api/compute/servers/test_servers.py | 42 +++- tempest/api/image/v2/test_images.py | 46 ++-- .../api/network/admin/test_dhcp_agent_scheduler.py | 11 + tempest/api/volume/admin/test_group_snapshots.py | 47 +++- tempest/api/volume/admin/test_groups.py | 23 +- tempest/api/volume/base.py | 103 +++++---- tempest/api/volume/test_volumes_snapshots.py | 17 +- tempest/cmd/cleanup.py | 26 --- tempest/common/utils/linux/remote_client.py | 18 +- tempest/common/waiters.py | 27 ++- tempest/config.py | 24 +- .../response/compute/v2_1/parameter_types.py | 2 +- tempest/lib/common/cred_client.py | 10 + tempest/lib/common/dynamic_creds.py | 162 +++++++++----- tempest/lib/common/http.py | 14 +- tempest/lib/common/rest_client.py | 40 +++- tempest/lib/common/ssh.py | 9 +- tempest/lib/common/utils/linux/remote_client.py | 10 +- tempest/lib/decorators.py | 39 ++++ tempest/lib/services/image/v2/images_client.py | 15 +- tempest/scenario/manager.py | 9 +- tempest/scenario/test_minimum_basic.py | 2 + .../scenario/test_network_advanced_server_ops.py | 8 +- tempest/scenario/test_network_basic_ops.py | 11 +- tempest/scenario/test_network_qos_placement.py | 3 + tempest/scenario/test_security_groups_basic_ops.py | 10 +- tempest/scenario/test_server_multinode.py | 2 +- tempest/scenario/test_shelve_instance.py | 2 +- .../api}/admin/test_aggregates.py | 1 + .../scenario/test_aggregates_basic_ops.py | 1 + tempest/test.py | 105 ++++++--- tempest/test_discover/test_discover.py | 2 +- .../lib/services/image/v2/test_images_client.py | 18 ++ tox.ini | 145 +++++++++--- zuul.d/base.yaml | 3 +- zuul.d/integrated-gate.yaml | 81 +++++-- zuul.d/project.yaml | 44 ++-- zuul.d/stable-jobs.yaml | 48 ++++ zuul.d/tempest-specific.yaml | 4 +- 71 files changed, 1585 insertions(+), 340 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index a118856a3..6e6604615 100644 --- a/requirements.txt +++ b/requirements.txt @@ -24,0 +25 @@ defusedxml>=0.7.1 # PSFL +fasteners>=0.16.0 # Apache-2.0

1 0

networking-baremetal 6.1.0 (antelope)
by no-reply＠openstack.org 27 Feb '23

27 Feb '23

We are satisfied to announce the release of: networking-baremetal 6.1.0: Neutron plugin that provides deep Ironic/Neutron integration. This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/networking-baremetal Download the package from: https://pypi.org/project/networking-baremetal Please report issues through: https://storyboard.openstack.org/#!/project/openstack/networking- baremetal For more details, please see below. Changes in networking-baremetal 6.0.0..6.1.0 -------------------------------------------- 2cf7c04 Fix tox4 errors a8c4dd4 Fixes for tox 4.0 0314baf Switch to 2023.1 Python3 unit tests and generic template name 897eddf Update master for stable/zed Diffstat (except docs and test files) ------------------------------------- releasenotes/source/index.rst | 1 + releasenotes/source/zed.rst | 6 ++++++ tox.ini | 10 ++++++++-- zuul.d/project.yaml | 2 +- 4 files changed, 16 insertions(+), 3 deletions(-)

1 0

patrole 0.16.0 (antelope)
by no-reply＠openstack.org 27 Feb '23

27 Feb '23

We are pleased to announce the release of: patrole 0.16.0: Patrole is a tool for verifying that Role-Based Access Control is being enforced across OpenStack deployments. This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/patrole Download the package from: https://tarballs.openstack.org/patrole/ Please report issues through: https://bugs.launchpad.net/patrole/+bugs For more details, please see below. Changes in patrole 0.14.0..0.16.0 --------------------------------- f7d47d9 Update tempest to 30.0.0 4769f92 Add cleanup for test_show_auto_allocated_topology test Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 2 +- .../test_server_misc_policy_actions_rbac.py | 49 +++++++++++++++------- .../network/test_auto_allocated_topology_rbac.py | 9 ++++ requirements.txt | 2 +- 10 files changed, 66 insertions(+), 40 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index cc13aa9..5a4858d 100644 --- a/requirements.txt +++ b/requirements.txt @@ -8 +8 @@ oslo.policy>=1.30.0 # Apache-2.0 -tempest>=17.1.0 # Apache-2.0 +tempest>=30.0.0 # Apache-2.0

1 0

ironic-python-agent-builder 5.1.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We jubilantly announce the release of: ironic-python-agent-builder 5.1.0: Tools and scripts to build Ironic Python Agent This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/ironic-python-agent-builder Download the package from: https://tarballs.openstack.org/ironic-python-agent-builder/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- python-agent-builder For more details, please see below. 5.1.0 ^^^^^ Bug Fixes * Fixes excess files being housed in /var/tmp inside of a ramdisk image which may, in some cases, result in a much larger ramdisk than expected. Files and folders in /var/tmp within a ramdisk are now removed prior to the ramdisk being packaged as part of a DIB based image build. Changes in ironic-python-agent-builder 5.0.0..5.1.0 --------------------------------------------------- 49367bc Remove /var/tmp/* from images 9416e82 Fix tox4 and setuptools errors 943b80c Update master for stable/zed Diffstat (except docs and test files) ------------------------------------- .../post-install.d/99-remove-extra-packages | 4 ++++ .../notes/clean-var-tmp-with-dib-builds-cd31a2cf70a7f935.yaml | 7 +++++++ releasenotes/source/index.rst | 1 + releasenotes/source/zed.rst | 6 ++++++ setup.py | 1 + tox.ini | 1 - 6 files changed, 19 insertions(+), 1 deletion(-)

1 0

python-freezerclient 5.1.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We high-spiritedly announce the release of: python-freezerclient 5.1.0: OpenStack Disaster Recovery API Client Library This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-freezerclient Download the package from: https://pypi.org/project/python-freezerclient Please report issues through: https://storyboard.openstack.org/#!/project/openstack/python- freezerclient For more details, please see below. Changes in python-freezerclient 4.4.0..5.1.0 -------------------------------------------- 2b112fc Dropped the python 3.6/3.7 in zed cycle testing runtime 4ea0d08 Update arm ci jobs 32d6f32 Add zed test jobs a49c42a Drop lower-constraints.txt and its testing Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 5 ++--- lower-constraints.txt | 43 ------------------------------------------- requirements.txt | 4 ++++ setup.cfg | 3 +-- tox.ini | 9 --------- 5 files changed, 7 insertions(+), 57 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index e1834d9..9c4ac6f 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. +

1 0

python-monascaclient 2.7.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We are amped to announce the release of: python-monascaclient 2.7.0: Monasca API Client Library This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-monascaclient Download the package from: https://pypi.org/project/python-monascaclient Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in python-monascaclient 2.5.0..2.7.0 -------------------------------------------- bb7d4b6 Drop lower-constraints.txt and its testing 46c852b Add Python3 zed unit tests a6de158 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 3 +- lower-constraints.txt | 72 ------------------------------------------- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++ requirements.txt | 4 +++ tox.ini | 6 ---- 6 files changed, 12 insertions(+), 80 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index f2f449b..a103be8 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. +

1 0

python-saharaclient 4.1.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We contentedly announce the release of: python-saharaclient 4.1.0: Client library for Sahara API This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-saharaclient Download the package from: https://pypi.org/project/python-saharaclient Please report issues through: https://bugs.launchpad.net/python-saharaclient/+bugs For more details, please see below. Changes in python-saharaclient 4.0.1..4.1.0 ------------------------------------------- d0c0eb5 scenario scenario-v2 tempest and tempest-v2 non-voting test Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)

1 0

python-keystoneclient 5.1.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We are happy to announce the release of: python-keystoneclient 5.1.0: Client Library for OpenStack Identity This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-keystoneclient Download the package from: https://pypi.org/project/python-keystoneclient Please report issues through: https://bugs.launchpad.net/python-keystoneclient/+bugs For more details, please see below. Changes in python-keystoneclient 5.0.1..5.1.0 --------------------------------------------- 4763cd8 Switch to 2023.1 Python3 unit tests and generic template name d0fbb84 Update master for stable/zed Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- releasenotes/source/index.rst | 1 + releasenotes/source/zed.rst | 6 ++++++ 3 files changed, 8 insertions(+), 1 deletion(-)

1 0

python-octaviaclient 3.4.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We are delighted to announce the release of: python-octaviaclient 3.4.0: Octavia client for OpenStack Load Balancing This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-octaviaclient Download the package from: https://pypi.org/project/python-octaviaclient Please report issues through: https://storyboard.openstack.org/#!/project/openstack/python- octaviaclient For more details, please see below. Changes in python-octaviaclient 3.3.0..3.4.0 -------------------------------------------- 6e306cc Remove munch dependency Diffstat (except docs and test files) ------------------------------------- octaviaclient/osc/v2/utils.py | 10 ++++++---- requirements.txt | 1 - 3 files changed, 14 insertions(+), 9 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 3a5a224..3a1783f 100644 --- a/requirements.txt +++ b/requirements.txt @@ -18 +17,0 @@ requests>=2.14.2 # Apache-2.0 -munch>=2.1.0 # MIT

1 0

python-heatclient 3.2.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We are happy to announce the release of: python-heatclient 3.2.0: OpenStack Orchestration API Client Library This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-heatclient Download the package from: https://pypi.org/project/python-heatclient Please report issues through: https://bugs.launchpad.net/python-heatclient/+bugs For more details, please see below. Changes in python-heatclient 3.1.0..3.2.0 ----------------------------------------- 712739e Adapt to tox 4 1c85185 Imported Translations from Zanata 1b87d22 Update master for stable/zed Diffstat (except docs and test files) ------------------------------------- releasenotes/source/index.rst | 1 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 100 +++++++++++++++++++++ releasenotes/source/zed.rst | 6 ++ tox.ini | 1 - 4 files changed, 107 insertions(+), 1 deletion(-)

1 0

python-solumclient 3.7.0 (antelope)
by no-reply＠openstack.org 24 Feb '23

24 Feb '23

We are happy to announce the release of: python-solumclient 3.7.0: Client library for Solum API This release is part of the antelope release series. The source is available from: https://opendev.org/openstack/python-solumclient Download the package from: https://tarballs.openstack.org/python-solumclient/ Please report issues through: https://bugs.launchpad.net/python-solumclient/+bugs For more details, please see below. Changes in python-solumclient 3.6.1..3.7.0 ------------------------------------------ b9b0d83 Fix tox 4 compatibility 2afd925 Switch to 2023.1 Python3 unit tests and generic template name Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- tox.ini | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

1 0