September 2022 - Release-announce

networking-hyperv 13.0.0.0rc1 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

Hello everyone, A new release candidate for networking-hyperv for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-hyperv/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/networking-hyperv/src/branch/stable/zed Release notes for networking-hyperv can be found at: https://docs.openstack.org/releasenotes/networking-hyperv/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-hyperv/+bugs and tag it *zed-rc-potential* to bring it to the networking-hyperv release crew's attention.

1 0

networking-baremetal 6.0.0 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

We are psyched to announce the release of: networking-baremetal 6.0.0: Neutron plugin that provides deep Ironic/Neutron integration. This release is part of the zed release series. The source is available from: https://opendev.org/openstack/networking-baremetal Download the package from: https://pypi.org/project/networking-baremetal Please report issues through: https://storyboard.openstack.org/#!/project/openstack/networking- baremetal For more details, please see below. Changes in networking-baremetal 5.1.0..6.0.0 -------------------------------------------- b1d9763 remove unicode from code 1d4de45 Doc - network device configuration capabilities 31a8c7a Add support for pre-configured link aggregates 21f591b Add LACP support to Netconf OpenConfig driver 3b99ee3 Add netconf-openconfig device driver 30b6008 Device management driver iface 5da78f9 OpenConfig YANG Model, python-bindings releasenote 1763e22 Add OpenConfig classes for LACP fe49c89 Add OpenConfig classes for interface aggregate b658ce5 Add OpenConfig classes for network-instance 9468d6e Add OpenConfig classes for switch vlans f4e19c3 Add OpenConfig classes for iface vlan plugging b3e01b4 The Python 3.6 and Python 3.7 Support has been dropped since zed f2bdac6 Remove babel.cfg bfb6ee0 Replace deprecated UPPER_CONSTRAINTS_FILE variable 107a5a7 Drop lower-constraints.txt and its testing df6c7c9 Register neutron common config options 3f25f63 Set agent_type in tests 912b742 Add Python3 zed unit tests 6396463 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- babel.cfg | 2 - .../configuration/ironic-neutron-agent/config.rst | 10 + .../configuration/ironic-neutron-agent/index.rst | 12 + .../{ => ironic-neutron-agent}/sample-config.rst | 0 .../ml2/device_drivers/common_config.rst | 31 + .../configuration/ml2/device_drivers/index.rst | 28 + .../ml2/device_drivers/netconf-openconfig.rst | 67 ++ .../contributor/quickstart-netconf-openconfig.rst | 6 + lower-constraints.txt | 77 -- networking_baremetal/agent/ironic_neutron_agent.py | 1 + networking_baremetal/common.py | 64 ++ networking_baremetal/config.py | 89 ++ networking_baremetal/constants.py | 111 ++ networking_baremetal/drivers/__init__.py | 0 networking_baremetal/drivers/base.py | 109 ++ networking_baremetal/drivers/netconf/openconfig.py | 946 ++++++++++++++++ networking_baremetal/exceptions.py | 30 + networking_baremetal/openconfig/__init__.py | 0 .../openconfig/interfaces/__init__.py | 0 .../openconfig/interfaces/aggregate.py | 145 +++ .../openconfig/interfaces/ethernet.py | 135 +++ .../openconfig/interfaces/interfaces.py | 360 ++++++ .../openconfig/interfaces/types.py | 22 + networking_baremetal/openconfig/lacp/__init__.py | 0 networking_baremetal/openconfig/lacp/lacp.py | 289 +++++ networking_baremetal/openconfig/lacp/types.py | 40 + .../openconfig/network_instance/__init__.py | 0 .../network_instance/network_instance.py | 120 ++ networking_baremetal/openconfig/vlan/__init__.py | 0 networking_baremetal/openconfig/vlan/types.py | 80 ++ networking_baremetal/openconfig/vlan/vlan.py | 455 ++++++++ networking_baremetal/plugins/ml2/baremetal_mech.py | 364 +++++- ...-manager-driver-interface-741703fbfc063780.yaml | 7 + ...-openconfig-device-driver-8fc15c9c2dc4bf17.yaml | 8 + ...evice-driver-lacp-support-ed9e1bc0eb784c9b.yaml | 6 + ...onfigured-link-aggregates-2dcba8f96500d159.yaml | 11 + .../notes/openconfig-library-5ecd1f158666c6c5.yaml | 21 + releasenotes/source/conf.py | 14 +- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 + requirements.txt | 5 + setup.cfg | 24 +- test-requirements.txt | 1 + ...orking-baremetal-common-device-driver-opts.conf | 4 + ...networking-baremetal-ironic-neutron-agent.conf} | 0 ...g-baremetal-netconf-openconfig-driver-opts.conf | 4 + tox.ini | 15 +- zuul.d/networking-baremetal-jobs.yaml | 1 - zuul.d/project.yaml | 3 +- 66 files changed, 5742 insertions(+), 166 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 0d5dbb2..6c11360 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. + @@ -4,0 +9 @@ +ncclient>=0.6.9 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index 7dc8b34..5092b94 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -10,0 +11 @@ testscenarios>=0.4 # Apache-2.0/BSD +ncclient>=0.6.9 # Apache-2.0

1 0

ironic-prometheus-exporter 4.0.0 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

We jubilantly announce the release of: ironic-prometheus-exporter 4.0.0: Prometheus Exporter for Ironic Hardware Sensor data This release is part of the zed release series. The source is available from: https://opendev.org/openstack/ironic-prometheus-exporter Download the package from: https://tarballs.openstack.org/ironic-prometheus-exporter/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- prometheus-exporter For more details, please see below. Changes in ironic-prometheus-exporter 3.1.0..4.0.0 -------------------------------------------------- 18ceb1e Replace the centos8 job with a centos9 one 5a5f5ef CI: Removing ironic job queue cf63c1b The Python 3.6 and Python 3.7 Support has been dropped since zed 690808b Drop lower-constraints.txt and its testing dddf1ef Add Python3 zed unit tests 5042722 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 8 +++----- lower-constraints.txt | 10 ---------- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++++ requirements.txt | 4 ++++ setup.cfg | 4 +--- tox.ini | 6 ------ 7 files changed, 15 insertions(+), 24 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index f01c107..a4052ae 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. +

1 0

cloudkitty 17.0.0.0rc1 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

Hello everyone, A new release candidate for cloudkitty for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/cloudkitty/src/branch/stable/zed Release notes for cloudkitty can be found at: https://docs.openstack.org/releasenotes/cloudkitty/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty and tag it *zed-rc-potential* to bring it to the cloudkitty release crew's attention.

1 0

aodh 15.0.0.0rc1 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

Hello everyone, A new release candidate for aodh for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/aodh/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/aodh/src/branch/stable/zed Release notes for aodh can be found at: https://docs.openstack.org/releasenotes/aodh/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/aodh/+bugs and tag it *zed-rc-potential* to bring it to the aodh release crew's attention.

1 0

ceilometer 19.0.0.0rc1 (zed)
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

Hello everyone, A new release candidate for ceilometer for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ceilometer/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/ceilometer/src/branch/stable/zed Release notes for ceilometer can be found at: https://docs.openstack.org/releasenotes/ceilometer/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ceilometer/+bugs and tag it *zed-rc-potential* to bring it to the ceilometer release crew's attention.

1 0

tooz 3.1.0
by no-reply＠openstack.org 13 Sep '22

13 Sep '22

We jubilantly announce the release of: tooz 3.1.0: Coordination library for distributed systems. The source is available from: https://opendev.org/openstack/tooz Download the package from: https://pypi.org/project/tooz For more details, please see below. Changes in tooz 3.0.0..3.1.0 ---------------------------- b64623d Support etcd3gw api version 00972f3 remove unicode from code Diffstat (except docs and test files) ------------------------------------- tooz/drivers/etcd3gw.py | 6 ++++++ 3 files changed, 16 insertions(+), 5 deletions(-)

1 0

openstack-governance 0.13.0
by no-reply＠openstack.org 12 Sep '22

12 Sep '22

We are pumped to announce the release of: openstack-governance 0.13.0: OpenStack Governance Documents The source is available from: https://opendev.org/openstack/openstack-governance Download the package from: https://tarballs.openstack.org/governance/ For more details, please see below. Changes in openstack-governance 0.12.0..0.13.0 ---------------------------------------------- 73f0b8c8 Switch requirements to distributed leadership a9a82103 Added Exception for the combined 2023.1(Antelope) elections ed330bed Appoint Dale Smith as Adjutant PTL 67414e40 Add Python3 zed unit tests f7a8e4ac Retire openstack-helm-addons 1909d4f7 Updating the RBAC goal as per new direction in zed cycle 4b28d885 Adding Skyline as Emerging Technology dfab714c Add charmed k8s operators to OpenStack Charms 8596e14e Fix minor language errors in the dropping-projects document 1382b603 Add Cinder Dell EMC PowerStore charm b78894f4 Retire openstack-helm-deployments 3365dd0e Add cinder ibm storwize charm cf340d61 Define Emerging technology and inactive projects framework 8a71c759 Clarify "ATC" and "AC" terms from the bylaws perspective 9c65ea32 Remove security-analysis repo from Security SIG 74e34a63 Add community infrastructure contributor in upstream investment 66491e6e Update potential triggers to consider dropping of the project 14e078a7 Add project stats check tool c5955968 Add a repository for the Large Scale SIG d29da1b7 Documenting the OpenStack release new identification process 36ff562d Add resolution for OpenStack release identification schema 340683ab Changing new release cadence name bceddc51 Update documentation to try DPL model for leaderless projects b9ca3302 Move FIPS goal from proposed to selected. 9b6103d5 Update milestones for FIPS goal a62f4647 Adding gmann to oslo tact-sig liaison 8af30dfc Retire openstack-helm-docs d73739ee Update Dmitriy Rabotyagov email 223888bf Remove oslo's TaCT SIG liaisons ffadd88e Fix keystone PTL model documentation 70f7b89e Resolution to drop the lower constraints maintenance 76b54e92 Remove TC Liaisons framework cc9e9ac6 Update sushy-oem-idrac from x/ to /openstack/ namespace 1c29c355 Retire openstack-health b69ba73a Add the cinder-three-par charm to Openstack charms 51efc490 Retire tempest-lib 72a20ab4 Add goal readiness checklist 77c49952 Add Ganesha based Ceph NFS Charm 430531fc Add tracking etherpad link in rbac goal 9ac21022 Define 2022 upstream investment opportunities 3f9d2fb0 Remove the tags framework (final part) 2bfa1b79 Remove assert:follows-standard-deprecation tag b640dd8c Reset TC liaisons list cb24c6f7 Add slaweq nomination as vice-chair 8a08db54 Appoint Wu Chunyang as Trove PTL 75d4132e Appoint ge cong as Freezer PTL 93feb0aa Appoint Chen Ke as Watcher PTL 244aa583 Appoint Rong Zhu as Solum PTL 9cbcdb09 Appoint Rong Zhu as Murano PTL 6f0c86ef Appoint Martin as Monasca PTL 3500140d Add sushy-oem-idrac as Hardware Vendor SIG owned af485f1e Update Arne email id ae24eed8 Update python testing template to yoga 1c1f98ef Remove link to the user-committee-repos.yaml file 567a8207 Update address of the mailing list d462be5c Add Ghanshyam nomination as chair 85a6b247 Appoint Wang as Zaqar PTL 95ce525e Appoint XueFeng as Senlin PTL 951d0a37 Appoint Lance as OpenStack Chef PTL c7b59713 Appoint pangliye as Venus PTL 6f3c42f3 Appoint Wenxiang as Skyline PTL fb3379b1 Appoint Rico as Heat PTL 7f83058f Appoint Alex as OpenStack Charms PTL 541b5f83 Appoint Spyros as Magnum PTL 546b947c Appoint suzhengwei as Masakari PTL c0df323d Appoint FengShengqin as Zun PTL 9623399f Amend release-cadence-adjustment resolution e900d6ae Close Zed PTL Elections 5e43a78b Close TC Zed election 1412bbb5 Define Zed cycle testing runtime aaa531c7 Release identification and release name c6554fe8 Remove the vulnerability:managed tag f498019c Propose release cadence adjustment resolution 488915ce Add link to Zed announcement 00338cd8 Revert "Switch Keystone to DPL" b7f45e22 Remove the tags framework (part 1) Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- CHAIR.rst | 15 - goals/completed/stein/upgrade-checkers.rst | 2 +- goals/index.rst | 87 +-- goals/selected/consistent-and-secure-rbac.rst | 801 ++++++++++++--------- goals/{proposed => selected}/fips.rst | 96 ++- goals/template.rst | 86 ++- openstack_governance/governance.py | 33 +- openstack_governance/projects_schema.yaml | 8 - reference/charter.rst | 15 +- reference/dropping-projects.rst | 19 + reference/election-exceptions.rst | 17 +- .../emerging-technology-and-inactive-projects.rst | 105 +++ reference/house-rules.rst | 39 +- reference/index.rst | 3 +- reference/legacy.yaml | 36 +- reference/members.yaml | 46 +- reference/projects.yaml | 640 ++++------------ reference/release-naming.rst | 101 +-- reference/runtimes/zed.rst | 47 ++ reference/sigs-repos.yaml | 4 +- reference/tag-template.rst | 87 --- .../tags/assert_follows-standard-deprecation.rst | 100 --- .../tags/assert_supports-accessible-upgrade.rst | 61 -- .../tags/assert_supports-api-interoperability.rst | 70 -- reference/tags/assert_supports-rolling-upgrade.rst | 59 -- reference/tags/assert_supports-standalone.rst | 41 -- reference/tags/assert_supports-upgrade.rst | 64 -- reference/tags/index.rst | 74 +- reference/tags/stable_follows-policy.rst | 110 --- reference/tags/starter-kit_compute.rst | 214 ------ reference/tags/starter-kit_kubernetes-in-virt.rst | 161 ----- reference/tags/status_maintenance-mode.rst | 101 --- reference/tags/vulnerability_managed.rst | 146 ---- reference/tc-guide.rst | 31 +- reference/tc-liaisons.rst | 9 - .../2022/community-infrastructure-sysadmins.rst | 113 +++ .../2022/index.rst | 17 + .../2022/quality-assurance-developers.rst | 109 +++ .../2022/rbac.rst | 92 +++ .../upstream-investment-opportunities/index.rst | 3 +- .../20141202-project-structure-reform-spec.rst | 2 + resolutions/20170620-volunteer-support.rst | 2 +- resolutions/20211224-tags-framework-removal.rst | 21 + .../20220210-release-cadence-adjustment.rst | 156 ++++ resolutions/20220414-drop-lower-constraints.rst | 81 +++ .../20220524-release-identification-process.rst | 39 + resolutions/index.rst | 10 + tools/assign_liaisons.py | 95 --- tools/base.py | 33 - tools/check_review_status.py | 3 - tools/project_stats_check.py | 319 ++++++++ tox.ini | 3 - 59 files changed, 2072 insertions(+), 2863 deletions(-)

1 0

ironic-python-agent-builder 5.0.0 (zed)
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We are pleased to announce the release of: ironic-python-agent-builder 5.0.0: Tools and scripts to build Ironic Python Agent This release is part of the zed release series. The source is available from: https://opendev.org/openstack/ironic-python-agent-builder Download the package from: https://tarballs.openstack.org/ironic-python-agent-builder/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic- python-agent-builder For more details, please see below. Changes in ironic-python-agent-builder 4.0.1..5.0.0 --------------------------------------------------- ddbd659 remove unicode prefix from code 020c4b3 Remove CentOS Stream 8 leftovers 57f50f7 Add smartmontools package to DIB image 43f2eae Remove some extra Centos Packages 3272b54 Document building an image with patches cd34086 Remove support for openSUSE since Python 3.6 is no longer supported d543aa8 Remove support for distributions with Python 3.6 e5bf43c Add multipath-io element 835f648 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .../environment.d/20-ipa-distro-family.bash | 1 - .../package-installs.yaml | 2 ++ .../post-install.d/99-remove-extra-packages | 5 +++ dib/multipath-io/README.md | 6 ++++ dib/multipath-io/element-deps | 2 ++ dib/multipath-io/package-installs.yaml | 2 ++ .../static/etc/modules-load.d/iscsi.conf | 9 +++++ releasenotes/notes/centos9-0f925822a2ab9e0a.yaml | 5 +++ releasenotes/notes/multipath-0eb6a4f3b2ee22a3.yaml | 6 ++++ releasenotes/notes/no-suse-e15d8384c423251c.yaml | 4 +++ releasenotes/source/conf.py | 16 ++++----- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++ roles/ipa-build-dib-image/tasks/main.yaml | 4 +-- tinyipa/build-tinyipa.sh | 6 ++-- tinyipa/build_files/buildreqs_python3.lst | 4 +-- tinyipa/build_files/finalreqs_python3.lst | 4 +-- zuul.d/ironic-python-agent-builder-jobs.yaml | 41 ++-------------------- zuul.d/project.yaml | 10 +----- 22 files changed, 106 insertions(+), 76 deletions(-)

1 0

sushy-tools 0.21.0
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We are tickled pink to announce the release of: sushy-tools 0.21.0: A set of tools to support the development and test of the Sushy library (https://docs.openstack.org/sushy/) The source is available from: https://opendev.org/openstack/sushy-tools Download the package from: https://tarballs.openstack.org/sushy-tools/ For more details, please see below. Changes in sushy-tools 0.20.0..0.21.0 ------------------------------------- 0d49437 Add Chassis to ServiceRoot 152dc1d remove unicode from code d576943 remove unicode from code 197087b List network interfaces of all types c560bd3 Document SUSHY_EMULATOR_ALLOWED_INSTANCES a2a7cf5 Fix per-request memoization Diffstat (except docs and test files) ------------------------------------- releasenotes/source/conf.py | 16 ++++++++-------- sushy_tools/emulator/main.py | 4 ++++ .../emulator/resources/systems/libvirtdriver.py | 2 +- sushy_tools/emulator/templates/root.json | 3 +++ .../emulator/resources/systems/test_libvirt.py | 2 ++ 9 files changed, 66 insertions(+), 15 deletions(-)

1 0

ironic-ui 6.0.0 (zed)
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We are overjoyed to announce the release of: ironic-ui 6.0.0: Ironic plugin UI for Horizon to allow users to view and manage bare metal nodes, ports and drivers. This release is part of the zed release series. The source is available from: https://opendev.org/openstack/ironic-ui Download the package from: https://pypi.org/project/ironic-ui Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic-ui For more details, please see below. Changes in ironic-ui 5.1.0..6.0.0 --------------------------------- 4d89480 remove unicode from code 23914cc Migrate to AngularJS v1.8.2 8ae2c25 Replace deprecated ugettext_lazy 5e49dc3 Imported Translations from Zanata 1803eeb The Python 3.6 and Python 3.7 Support has been dropped since zed 6c546a0 Use Horizon project template for nodejs jobs 16c4d0a Address RemovedInDjango40Warning 74a0b9c Add Python3 zed unit tests 2ab0e72 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 4 +-- ironic_ui/content/ironic/panel.py | 2 +- ironic_ui/content/ironic/urls.py | 6 ++-- ironic_ui/karma.conf.js | 10 ++---- .../ironic/bootdevice/bootdevice.service.spec.js | 2 +- .../dashboard/admin/ironic/ironic.service.spec.js | 36 ++++++++++++++-------- .../ironic/raidconfig/raidconfig.service.spec.js | 2 +- ironic_ui/test/urls.py | 4 +-- package.json | 2 +- releasenotes/source/conf.py | 14 ++++----- releasenotes/source/index.rst | 1 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 28 +++++++++++++++-- releasenotes/source/yoga.rst | 6 ++++ setup.cfg | 4 +-- tox.ini | 14 +++++---- 16 files changed, 89 insertions(+), 52 deletions(-)

1 0

kolla 13.5.0 (xena)
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We joyfully announce the release of: kolla 13.5.0: Kolla OpenStack Deployment This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 13.5.0 ^^^^^^ Upgrade Notes ************* * To fix CVE-2022-38060, support for KOLLA_CONFIG and KOLLA_CONFIG_FILE environment variables in kolla-built containers has been dropped. Now, only the single trusted path of "/var/lib/kolla/config_files/config.json" will be utilised for loading container config. We believe this is a reasonable tradeoff as these environment variables were not used by any known downstream and potential users in the wild can easily adapt as this does not limit the functionality per se, only making it stricter as to where the config can come from. Security Issues *************** * Fixes CVE-2022-38060, a sudo privilege escalation vulnerability. LP#1985784 Changes in kolla 13.4.0..13.5.0 ------------------------------- 1011fc60c Fix CVE-2022-38060 Diffstat (except docs and test files) ------------------------------------- .../notes/bug-1985784-59df54a10a004551.yaml | 16 ++++++++++++++++ 5 files changed, 24 insertions(+), 53 deletions(-)

1 0

kolla 12.6.0 (wallaby)
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We are delighted to announce the release of: kolla 12.6.0: Kolla OpenStack Deployment This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 12.6.0 ^^^^^^ Upgrade Notes ************* * To fix CVE-2022-38060, support for KOLLA_CONFIG and KOLLA_CONFIG_FILE environment variables in kolla-built containers has been dropped. Now, only the single trusted path of "/var/lib/kolla/config_files/config.json" will be utilised for loading container config. We believe this is a reasonable tradeoff as these environment variables were not used by any known downstream and potential users in the wild can easily adapt as this does not limit the functionality per se, only making it stricter as to where the config can come from. Security Issues *************** * Fixes CVE-2022-38060, a sudo privilege escalation vulnerability. LP#1985784 Changes in kolla 12.5.0..12.6.0 ------------------------------- 5056b65bf Fix CVE-2022-38060 Diffstat (except docs and test files) ------------------------------------- .../notes/bug-1985784-59df54a10a004551.yaml | 16 ++++++++++++++++ 5 files changed, 24 insertions(+), 53 deletions(-)

1 0

kolla 14.5.0 (yoga)
by no-reply＠openstack.org 09 Sep '22

09 Sep '22

We are tickled pink to announce the release of: kolla 14.5.0: Kolla OpenStack Deployment This release is part of the yoga stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 14.5.0 ^^^^^^ Upgrade Notes ************* * To fix CVE-2022-38060, support for KOLLA_CONFIG and KOLLA_CONFIG_FILE environment variables in kolla-built containers has been dropped. Now, only the single trusted path of "/var/lib/kolla/config_files/config.json" will be utilised for loading container config. We believe this is a reasonable tradeoff as these environment variables were not used by any known downstream and potential users in the wild can easily adapt as this does not limit the functionality per se, only making it stricter as to where the config can come from. Security Issues *************** * Fixes CVE-2022-38060, a sudo privilege escalation vulnerability. LP#1985784 Changes in kolla 14.4.0..14.5.0 ------------------------------- 91c9a011f Fix CVE-2022-38060 Diffstat (except docs and test files) ------------------------------------- .../notes/bug-1985784-59df54a10a004551.yaml | 16 ++++++++++++++++ 5 files changed, 24 insertions(+), 53 deletions(-)

1 0

openstack-ansible 23.4.1 (wallaby)
by no-reply＠openstack.org 08 Sep '22

08 Sep '22

We exuberantly announce the release of: openstack-ansible 23.4.1: Ansible playbooks for deploying OpenStack This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. Changes in openstack-ansible 23.4.0..23.4.1 ------------------------------------------- 7b50f28a4 Bump OpenStack-Ansible Wallaby 5946ab0c3 Switch ARA report type from html to database for openstack-ansible jobs 32f600977 Set zuul post-timeout to 3 hours Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 14 ++++----- playbooks/defaults/repo_packages/gnocchi.yml | 2 +- playbooks/defaults/repo_packages/nova_consoles.yml | 4 +-- .../defaults/repo_packages/openstack_services.yml | 36 +++++++++++----------- scripts/log-collect.sh | 2 +- zuul.d/jobs.yaml | 4 +++ 6 files changed, 33 insertions(+), 29 deletions(-)

1 0

python-novaclient 17.4.1 (wallaby)
by no-reply＠openstack.org 08 Sep '22

08 Sep '22

We are delighted to announce the release of: python-novaclient 17.4.1: Client library for OpenStack Compute API This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/python-novaclient Download the package from: https://pypi.org/project/python-novaclient Please report issues through: https://bugs.launchpad.net/python-novaclient/+bugs For more details, please see below. Changes in python-novaclient 17.4.0..17.4.1 ------------------------------------------- 5ee44275 When creating a client, pass the default logger 23be8022 Use well named anchor into the microversion history 83fd25c1 Update TOX_CONSTRAINTS_FILE for stable/wallaby 6e2dd735 Update .gitreview for stable/wallaby Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + novaclient/v2/client.py | 2 +- releasenotes/notes/microversion-v2_88-d91136020e3a3621.yaml | 2 +- tox.ini | 8 ++++---- 4 files changed, 7 insertions(+), 6 deletions(-)

1 0

openstack-ansible 24.4.1 (xena)
by no-reply＠openstack.org 08 Sep '22

08 Sep '22

We exuberantly announce the release of: openstack-ansible 24.4.1: Ansible playbooks for deploying OpenStack This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. Changes in openstack-ansible 24.4.0..24.4.1 ------------------------------------------- 7f382291b Bump OpenStack-Ansible Xena 5271b908a Bump keepalived role back 5100e839e Increase ControlPersist timeout to 300 seconds Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 22 +++++++------- playbooks/defaults/repo_packages/gnocchi.yml | 2 +- playbooks/defaults/repo_packages/nova_consoles.yml | 4 +-- .../defaults/repo_packages/openstack_services.yml | 34 +++++++++++----------- scripts/openstack-ansible.rc | 1 + 5 files changed, 32 insertions(+), 31 deletions(-)

1 0

openstack-ansible 25.1.0 (yoga)
by no-reply＠openstack.org 08 Sep '22

08 Sep '22

We are psyched to announce the release of: openstack-ansible 25.1.0: Ansible playbooks for deploying OpenStack This release is part of the yoga stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. 25.1.0 ^^^^^^ New Features ************ * Implemented variables "rally_openstack_git_repo" and "rally_openstack_git_install_branch" that allow to override installation source for rally-openstack package as well as control installed version of the package. Upgrade Notes ************* * The RabbitMQ management interface surfaced via HAProxy defaults to using TLS from the Yoga release. Note that when using TLS the default port switches from 15672 to 15671. TLS can be disabled if required by adjusting 'rabbitmq_management_ssl'. Bug Fixes ********* * Wheels build for multi-arch and multi-distro setups is fixed. For that you still need to have set of venv_build_targets that will define targets for each operating system and architecture. Changes in openstack-ansible 25.0.0..25.1.0 ------------------------------------------- 58f772cb8 Bump OpenStack-Ansible Yoga bc678785b Increase ControlPersist timeout to 300 seconds bfab12e4c rabbitmq: default to using TLS for management user interface 0a323c602 Correct series names for documentation. Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 40 ++++++++-------- deploy-guide/source/conf.py | 4 +- inventory/group_vars/all/all.yml | 3 ++ inventory/group_vars/haproxy/haproxy.yml | 6 ++- playbooks/defaults/repo_packages/gnocchi.yml | 4 +- playbooks/defaults/repo_packages/nova_consoles.yml | 4 +- .../defaults/repo_packages/openstack_services.yml | 54 +++++++++++----------- .../defaults/repo_packages/openstack_testing.yml | 40 ++++++++-------- ...x_respect_multiarch_setup-6e4d0b2c48ff3a18.yaml | 6 +++ ...mq-upgrade-management-ssl-d6a7f77f2a65ffa9.yaml | 7 +++ .../rally-openstack-git-121821ef54c48419.yaml | 8 ++++ scripts/openstack-ansible.rc | 1 + 13 files changed, 104 insertions(+), 77 deletions(-)

1 0

oslo.concurrency 5.0.1
by no-reply＠openstack.org 06 Sep '22

06 Sep '22

We are satisfied to announce the release of: oslo.concurrency 5.0.1: Oslo Concurrency library The source is available from: https://opendev.org/openstack/oslo.concurrency Download the package from: https://pypi.org/project/oslo.concurrency For more details, please see below. Changes in oslo.concurrency 5.0.0..5.0.1 ---------------------------------------- 01cf2ff Ignore coverage result files ee3f73a Fix fair internal lock used from eventlet.spawn_n 796203c Prove that spawn_n with fair lock is broken Diffstat (except docs and test files) ------------------------------------- .gitignore | 3 ++ oslo_concurrency/lockutils.py | 29 +++++++++--- tox.ini | 3 +- 4 files changed, 79 insertions(+), 7 deletions(-)

1 0

python-octaviaclient 3.1.0 (zed)
by no-reply＠openstack.org 06 Sep '22

06 Sep '22

We are stoked to announce the release of: python-octaviaclient 3.1.0: Octavia client for OpenStack Load Balancing This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-octaviaclient Download the package from: https://pypi.org/project/python-octaviaclient Please report issues through: https://storyboard.openstack.org/#!/project/openstack/python- octaviaclient For more details, please see below. 3.1.0 ^^^^^ New Features * It is now possible to create a loadbalancer with more than one VIP by passing "--additional-vip subnet-id=<name-or-uuid>[,ip- address=<ip>]" to the create command. Additional VIPs will also appear in the "show" details of a loadbalancer. Changes in python-octaviaclient 3.0.0..3.1.0 -------------------------------------------- 3b53c1b Allow creating/showing LBs with Additional VIPs Diffstat (except docs and test files) ------------------------------------- octaviaclient/osc/v2/constants.py | 1 + octaviaclient/osc/v2/load_balancer.py | 7 ++++ octaviaclient/osc/v2/utils.py | 39 ++++++++++++++++++++++ .../support-additional-vips-cd0164f1838ee676.yaml | 7 ++++ 6 files changed, 94 insertions(+)

1 0

python-saharaclient 4.0.1 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are jazzed to announce the release of: python-saharaclient 4.0.1: Client library for Sahara API This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-saharaclient Download the package from: https://pypi.org/project/python-saharaclient Please report issues through: https://bugs.launchpad.net/python-saharaclient/+bugs For more details, please see below. Changes in python-saharaclient 4.0.0..4.0.1 ------------------------------------------- 884ed50 Remove Python 2 support Diffstat (except docs and test files) ------------------------------------- 1 file changed, 8 insertions(+), 8 deletions(-)

1 0

python-keystoneclient 5.0.1 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are stoked to announce the release of: python-keystoneclient 5.0.1: Client Library for OpenStack Identity This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-keystoneclient Download the package from: https://pypi.org/project/python-keystoneclient Please report issues through: https://bugs.launchpad.net/python-keystoneclient/+bugs For more details, please see below. Changes in python-keystoneclient 5.0.0..5.0.1 --------------------------------------------- bc8e9e7 fix: remove error python2 defense code Diffstat (except docs and test files) ------------------------------------- keystoneclient/v3/projects.py | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)

1 0

python-troveclient 8.0.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are satisfied to announce the release of: python-troveclient 8.0.0: Client library for OpenStack DBaaS API This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-troveclient Download the package from: https://pypi.org/project/python-troveclient Please report issues through: https://bugs.launchpad.net/python-troveclient/+bugs For more details, please see below. 8.0.0 ^^^^^ Upgrade Notes * Python 3.6 & 3.7 support has been dropped. The minimum version of Python now supported is Python 3.8. Changes in python-troveclient 7.3.0..8.0.0 ------------------------------------------ ad6544e Update python testing as per zed cycle testing runtime Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- releasenotes/notes/drop-python-3-6-and-3-7-8e07d44dd0e12619.yaml | 5 +++++ setup.cfg | 4 +--- 3 files changed, 7 insertions(+), 4 deletions(-)

1 0

python-mistralclient 4.5.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are thrilled to announce the release of: python-mistralclient 4.5.0: Mistral Client Library This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-mistralclient Download the package from: https://pypi.org/project/python-mistralclient Please report issues through: https://bugs.launchpad.net/python-mistralclient/+bugs For more details, please see below. Changes in python-mistralclient 4.4.0..4.5.0 -------------------------------------------- 8b9f313 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++++ 2 files changed, 7 insertions(+)

1 0

python-heatclient 3.1.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are excited to announce the release of: python-heatclient 3.1.0: OpenStack Orchestration API Client Library This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-heatclient Download the package from: https://pypi.org/project/python-heatclient Please report issues through: https://bugs.launchpad.net/python-heatclient/+bugs For more details, please see below. Changes in python-heatclient 3.0.0..3.1.0 ----------------------------------------- 69d4a5e Accept sha256 hash for swift tempurl Diffstat (except docs and test files) ------------------------------------- 1 file changed, 1 insertion(+), 1 deletion(-)

1 0

python-tackerclient 1.12.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are delighted to announce the release of: python-tackerclient 1.12.0: CLI and Client Library for OpenStack Tacker This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-tackerclient Download the package from: https://pypi.org/project/python-tackerclient Please report issues through: https://bugs.launchpad.net/python-tackerclient/+bugs For more details, please see below. Changes in python-tackerclient 1.11.0..1.12.0 --------------------------------------------- 64d7a87 Add support cnf auto heal and scale 0675099 Support listing all records at once with paging 075a327 Update Python-TackerClient Documentation fa4a668 Support for 'extra' parameters for vim register 0fcb9a5 Add OpenID Connect Token Auth for k8s 21f60be Add vnflcm subscriptions APIs 5c643d0 Add Python3 zed unit tests Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- .../cli/vnf_network_forwarding_path_commands.rst | 19 + setup.cfg | 21 + tackerclient/common/exceptions.py | 4 + .../create_lccn_subscription_param_sample.json | 114 +++++ tackerclient/osc/v1/vnflcm/vnflcm.py | 4 +- tackerclient/osc/v1/vnflcm/vnflcm_subsc.py | 206 +++++++++ tackerclient/osc/v2/__init__.py | 0 tackerclient/osc/v2/vnffm/__init__.py | 0 .../create_vnf_fm_subscription_param_sample.json | 62 +++ tackerclient/osc/v2/vnffm/vnffm_alarm.py | 177 ++++++++ tackerclient/osc/v2/vnffm/vnffm_sub.py | 197 +++++++++ tackerclient/osc/v2/vnfpm/__init__.py | 0 .../samples/create_vnf_pm_job_param_sample.json | 36 ++ .../samples/update_vnf_pm_job_param_sample.json | 18 + tackerclient/osc/v2/vnfpm/vnfpm_job.py | 334 +++++++++++++++ tackerclient/osc/v2/vnfpm/vnfpm_report.py | 67 +++ tackerclient/tacker/v1_0/nfvo/vim_utils.py | 23 +- tackerclient/v1_0/client.py | 219 +++++++++- 51 files changed, 4104 insertions(+), 225 deletions(-)

1 0

python-masakariclient 8.0.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are gleeful to announce the release of: python-masakariclient 8.0.0: masakariclient module and a CLI tool for masakari This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-masakariclient Download the package from: https://tarballs.openstack.org/python-masakariclient/ Please report issues through: https://bugs.launchpad.net/python-masakariclient/+bugs For more details, please see below. Changes in python-masakariclient 7.2.0..8.0.0 --------------------------------------------- 9ddb79e Drop Python 3.6 and 3.7 support dc0762e Add Python3 zed unit tests 0aa4b89 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++++ setup.cfg | 4 +--- 4 files changed, 9 insertions(+), 4 deletions(-)

1 0

python-manilaclient 4.1.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are delighted to announce the release of: python-manilaclient 4.1.0: Client library for OpenStack Manila API. This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-manilaclient Download the package from: https://pypi.org/project/python-manilaclient Please report issues through: https://bugs.launchpad.net/python-manilaclient/+bugs For more details, please see below. 4.1.0 ^^^^^ Prelude ******* The manilaclient repository now includes a plugin to openstackclient. You can use the "openstack share .." command line interface to administer the Shared File System service (manila) on any deployment alongside using it to provision and manage the life cycle of manila resources. Refer to the official documentation (https://docs.openstack.org/python- manilaclient/latest/cli/osc_plugin_cli.html) to find command syntax and usage information. You may also view this documentation directly in the CLI with "openstack help share <subcommand>". For example, "openstack help share create". New Features ************ * The command *share-network-subnet-create-check* was added. This command will check if the share network subnet can be created in a specific share network based on the cloud support. The OSC equivalent command is also added, run the subnet create with the new option --check-only. Upgrade Notes ************* * With the introduction of the openstackclient integration, we are also announcing our intent to deprecate the "manila" shell commands. These clients will emit a deprecation warning in a future release, and will eventually be removed. We recommend that you transition your workflows and tooling to use the "openstack" CLI when using the Shared File Systems service (manila) commands. The "manilaclient" SDK is unaffected by the introducion of OpenStackClient. Bug Fixes ********* * Launchpad bug 1909477 (https://bugs.launchpad.net/python- manilaclient/+bug/1909477) has been fixed by prevent sending the share creation request with any capitalization of the name "None". * Bug #1925486 (https://bugs.launchpad.net/manila/+bug/1925486) Share replica create command does not support share network option and manila internally uses parent share's share network. Fixed it to allow any share network by providing option "share-network" starting with microversion '2.72'. * Launchpad bug 1959329 (https://bugs.launchpad.net/python- manilaclient/+bug/1959329) has been fixed for share server listing with network subnet id. * When creating a share from snapshot with 'openstack share create', the client no longer forces the use of a share type. See bug #1980985 (https://launchpad.net/bugs/1980985) for more information. Other Notes *********** * The "openstack share .." CLI is usable only with the "v2" API. At this time, we have no plans to support its use with the deprecated "v1" API provided by the Shared File System service (manila). * The "openstack share .." CLI does not yet support API microversion negotiation. This means that to use this release of the OpenStackClient with older Shared File System API service, users would have to set the API version in their environments. This can be done via cloud config (specify "shared_file_system_api_version") or via shell environment "OS_SHARE_API_VERSION" or via the CLI overrride: "--os-share-api-version". Without this override, the client will use a hard-coded API version (https://opendev.org/openstack/python- manilaclient/src/branch/stable/zed/manilaclient/api_versions.py#L30) to make API requests and this may fail in your deployment if the version is unsupported. Changes in python-manilaclient 4.0.0..4.1.0 ------------------------------------------- 09ab2c3 [OSC] Implement Share Server Migration set task-state 586c603 Support multiple subnets per AZ bb1a957 [OSC] Implement Share Server Migration check 67ebf68 Make the OSC plugin handle the --insecure flag db1bba7 Add 'share-network' option for share replica create. a9172c1 [reno] Announce openstackclient GA dfb3f07 Fixes minor typos and removes redundants lines. 20638a5 [OSC] Implement Share Server Migration Start Command 35be44a [OSC] Implement Share Server Migration Show Command 8f53399 [OSC] Implement Share Restore Command 5c5220b [OSC] Implement Share Server Migration Cancel and Complete Command 617a93d requirements: Bump python-openstackclient version e93f3c2 Ensures API microversion is greater than or equal to '2.69' 963ac40 Add share group type functional tests for OSC 5f56bff requirements: Add stestr 06f7ea6 [OSC] Don't use default type with snapshot clones 992a942 Fix missing space before end quote 51154c4 [OSC] Fix typos in help messages for security services command df9af53 [OSC] Add OSC Functional Tests Export Location 8fedd08 [OSC] Implement Share Migration show and add argument to Share Set Command 79d1f1c Python3.11: fix unit test crashes 17d5609 [OSC] Add functional tests for share snapshots 4f7724c Add support for --soft when deleting a share or more shares 8873dc2 [OSC] Implement security services commands 27a8a06 Add functional tests for group type access f3eea6b [OSC] Add OSC Functional Tests Replica Export Location dc918e5 [OSC] Implement Share Server Commands 1597bf6 Avoid any capitalization of the name "None" 27b8830 Fix share server listing with network subnet id 301274d [OSC] Implement Share Group Snapshot Commands 64eefb9 [OSC] Add OSC Functional Tests Network 2f11d14 Fix incompatible headers on OS share group type list eeece58 fix manager _list() method when called from another manager Diffstat (except docs and test files) ------------------------------------- manilaclient/api_versions.py | 2 +- manilaclient/base.py | 14 +- manilaclient/osc/plugin.py | 3 +- manilaclient/osc/v2/security_services.py | 501 +++++++++++++ manilaclient/osc/v2/share.py | 129 +++- manilaclient/osc/v2/share_group_snapshots.py | 442 ++++++++++++ manilaclient/osc/v2/share_group_types.py | 3 +- manilaclient/osc/v2/share_network_subnets.py | 53 +- manilaclient/osc/v2/share_replicas.py | 18 + manilaclient/osc/v2/share_servers.py | 638 +++++++++++++++++ manilaclient/osc/v2/share_snapshots.py | 10 +- .../functional/osc/test_share_group_type_access.py | 88 +++ .../functional/osc/test_share_network_subnets.py | 37 + .../osc/test_share_replica_export_locations.py | 59 ++ .../unit/osc/v2/test_share_group_snapshots.py | 671 ++++++++++++++++++ .../unit/osc/v2/test_share_network_subnets.py | 58 ++ manilaclient/v2/share_networks.py | 27 + manilaclient/v2/share_replicas.py | 18 +- manilaclient/v2/shares.py | 2 +- manilaclient/v2/shell.py | 140 +++- ...rt_multiple_subnet_per_az-46145c3e90e097be.yaml | 6 + ...shares-with-the-name-none-cfb0a59baa597803.yaml | 6 + ...ion-to-replica-create-api-7d2ff3628e93fc77.yaml | 8 + ...server-listing-by-subnets-fa6447fd43093cae.yaml | 4 + ...re-type-with-snapshot-ref-de0331c640afbbd3.yaml | 6 + .../manila-openstackclient-bf61ceb270d3afb7.yaml | 37 + setup.cfg | 25 + test-requirements.txt | 14 +- 51 files changed, 5583 insertions(+), 88 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index d1d9c3f..6a9d952 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1,5 +0,0 @@ -# The order of packages is significant, because pip processes them in the order -# of appearance. Changing the order has an impact on the overall integration -# process, which may cause wedges in the gate later. - -# hacking should be first @@ -11,5 +6 @@ fixtures>=3.0.0 # Apache-2.0/BSD -# Can be removed in Victoria cycle, when we raise the requirement of -# python-openstackclient in this file to a version that no longer -# requires mock. See: https://review.opendev.org/717410/ -mock>=2.0.0 # BSD -os-testr>=1.0.0 # Apache-2.0 +stestr>=2.0.0 # Apache-2.0 @@ -18,2 +9 @@ testtools>=2.2.0 # MIT -python-openstackclient>=3.12.0 # Apache-2.0 - +python-openstackclient>=5.3.0 # Apache-2.0

1 0

python-swiftclient 4.1.0 (zed)
by no-reply＠openstack.org 02 Sep '22

02 Sep '22

We are glad to announce the release of: python-swiftclient 4.1.0: OpenStack Object Storage API Client Library This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-swiftclient Download the package from: https://pypi.org/project/python-swiftclient Please report issues through: https://bugs.launchpad.net/python-swiftclient/+bugs For more details, please see below. Changes in python-swiftclient 4.0.1..4.1.0 ------------------------------------------ defbb4a Allow tempurl times to have units 653cbcb Expand retry handling on ratelimit response a1d2f31 Enable retry_on_ratelimit by default 0bd2ab5 Fix misuse of assertTrue 5d451fb More cleanup following py2 removal f1858d8 Add option to skip container PUT during upload Diffstat (except docs and test files) ------------------------------------- swiftclient/client.py | 20 +++---- swiftclient/service.py | 103 +++++++++++++++++++----------------- swiftclient/shell.py | 33 +++++++----- swiftclient/utils.py | 89 +++++++++++++++++++------------ test-requirements.txt | 7 ++- test/functional/test_swiftclient.py | 6 +-- test/unit/test_multithreading.py | 3 +- test/unit/test_shell.py | 54 ++++++++++++++++++- test/unit/test_swiftclient.py | 53 +++++++++++-------- test/unit/test_utils.py | 39 ++++++++++++++ 10 files changed, 262 insertions(+), 145 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index b0633eb..a4b64ee 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -1,2 +1 @@ -hacking>=1.1.0,<1.2.0;python_version<'3.0' # Apache-2.0 -hacking>=3.2.0,<3.3.0;python_version>='3.0' # Apache-2.0 +hacking>=3.2.0,<3.3.0 # Apache-2.0 @@ -4 +3 @@ hacking>=3.2.0,<3.3.0;python_version>='3.0' # Apache-2.0 -coverage!=4.4,>=4.0 # Apache-2.0 +coverage!=4.4,>=4.0 # Apache-2.0 @@ -7 +6 @@ stestr>=2.0.0,!=3.0.0 # Apache-2.0 -openstacksdk>=0.11.0 # Apache-2.0 +openstacksdk>=0.11.0 # Apache-2.0

1 0

etcd3gw 2.1.0
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are stoked to announce the release of: etcd3gw 2.1.0: A python client for etcd3 grpc-gateway v3 API The source is available from: https://opendev.org/openstack/etcd3gw Download the package from: https://tarballs.openstack.org/etcd3gw/ For more details, please see below. 2.1.0 ^^^^^ New Features * The client adds support for specifying the etcd grpc-gateway's API path. For backward compatibility, the path defaults to '/v3alpha/', but may be overriden (e.g. '/v3') for newer versions of etcd that no longer support the v3alpha API. Changes in etcd3gw 2.0.0..2.1.0 ------------------------------- 2a7f392 Pass api_path thru etcd3gw.client Diffstat (except docs and test files) ------------------------------------- etcd3gw/client.py | 7 +++++-- releasenotes/notes/configurable-api-path-7652e756b6837e0b.yaml | 7 +++++++ 3 files changed, 17 insertions(+), 2 deletions(-)

1 0

python-glanceclient 4.1.0 (zed)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We exuberantly announce the release of: python-glanceclient 4.1.0: OpenStack Image API Client Library This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-glanceclient Download the package from: https://pypi.org/project/python-glanceclient Please report issues through: https://bugs.launchpad.net/python-glanceclient/+bugs For more details, please see below. 4.1.0 ^^^^^ New Features * Add support for new "glance-download" image-import method to import image from another glance/region in federated deployment. Changes in python-glanceclient 4.0.1..4.1.0 ------------------------------------------- 92cd70a Add support for glance-download import method 219568c Bump default pagesize 75218d2 Delete python bytecode before every test run Diffstat (except docs and test files) ------------------------------------- glanceclient/v2/images.py | 14 +- glanceclient/v2/shell.py | 60 +++++++- ...ce-download-import-method-10525254db3e8e7a.yaml | 5 + tox.ini | 1 + 9 files changed, 236 insertions(+), 23 deletions(-)

1 0

kolla 14.4.0 (yoga)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are tickled pink to announce the release of: kolla 14.4.0: Kolla OpenStack Deployment This release is part of the yoga stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 14.4.0 ^^^^^^ Bug Fixes * Fixes problems when running with docker-py >=6. LP#1988121 Changes in kolla 14.3.0..14.4.0 ------------------------------- b3e722108 mariadb: Fix RPM repository URLs Diffstat (except docs and test files) ------------------------------------- kolla/image/build.py | 11 ++++++++--- kolla/template/repos.yaml | 8 ++++---- releasenotes/notes/docker-6-6d77b5ff7ec1daef.yaml | 5 +++++ 5 files changed, 23 insertions(+), 13 deletions(-)

1 0

kolla-ansible 12.7.0 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are excited to announce the release of: kolla-ansible 12.7.0: Ansible Deployment of Kolla containers This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 12.7.0 ^^^^^^ Security Issues *************** * Kolla Ansible used to run Ironic's tftpd as an (unprivileged) root user. Now, it will explicitly use the nobody user. Bug Fixes ********* * Fixes 1982777. Set multipathd user_friendly_names to "no" to make os-brick able to resize volumes online. Adds ability to override multipathd config. LP#1982777 * Fixed bug #1987982 (https://bugs.launchpad.net/kolla- ansible/+bug/1987982) This bug caused the database log_bin_trust_function_creators variable not to be set back to "OFF" after a keystone upgrade. * Fixes an issue with Gnocchi when gnocchi-statsd is disabled. LP#1926914 * Fixes an issue where ping might not be installed on some systems, causing HAProxy prechecks to fail. * If "ironic_enabled_notification_topics" is set to "true", "ironic_notification_level" is set to "info" in order to ensure that Ironic actually sends out notifications. See bug 1969826 (https://bugs.launchpad.net/kolla- ansible/+bug/1969826) for details. Changes in kolla-ansible 12.6.0..12.7.0 --------------------------------------- 717a43c28 Fix haproxy prechecks after deployment 42c3a6abf keystone: Remove redundant 'when' c36c8983a [security] Make Ironic tftpd run as nobody a5d812b35 packages: install iputils for ping 0c53d56fa gnocchi: fix external ceph integration when gnocchi-statsd is disabled 4fafc214b Fix nova online volume resize with multipathd c4857a79a Set the ironic notification level Diffstat (except docs and test files) ------------------------------------- ansible/roles/baremetal/defaults/main.yml | 2 ++ ansible/roles/gnocchi/tasks/external_ceph.yml | 37 ++++++++++------------ ansible/roles/haproxy/tasks/precheck.yml | 2 +- ansible/roles/ironic/templates/ironic-pxe.json.j2 | 2 +- ansible/roles/ironic/templates/ironic.conf.j2 | 4 +++ ansible/roles/keystone/handlers/main.yml | 1 - ansible/roles/keystone/tasks/upgrade.yml | 1 - ansible/roles/multipathd/tasks/config.yml | 17 ++++++---- .../roles/multipathd/templates/multipath.conf.j2 | 2 +- .../notes/bug-1982777-0cac9753aa18a037.yaml | 8 +++++ ...nction_creators-variables-8628098891513dac.yaml | 6 ++++ .../notes/fix-gnocchi-statsd-a56c789a3da758a6.yaml | 5 +++ .../notes/install-iputils-50da7016788f413c.yaml | 5 +++ ...ironic-notification-level-a23db99c66c4b752.yaml | 9 ++++++ .../notes/ironic-tftp-nobody-835803ba36398ea3.yaml | 6 ++++ 15 files changed, 76 insertions(+), 31 deletions(-)

1 0

kolla-ansible 14.4.0 (yoga)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are tickled pink to announce the release of: kolla-ansible 14.4.0: Ansible Deployment of Kolla containers This release is part of the yoga stable release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 14.4.0 ^^^^^^ Security Issues *************** * Kolla Ansible used to run Ironic's tftpd as an (unprivileged) root user. Now, it will explicitly use the nobody user. Bug Fixes ********* * Fixes 1982777. Set multipathd user_friendly_names to "no" to make os-brick able to resize volumes online. Adds ability to override multipathd config. LP#1982777 * Fixed bug #1987982 (https://bugs.launchpad.net/kolla- ansible/+bug/1987982) This bug caused the database log_bin_trust_function_creators variable not to be set back to "OFF" after a keystone upgrade. * If "ironic_enabled_notification_topics" is set to "true", "ironic_notification_level" is set to "info" in order to ensure that Ironic actually sends out notifications. See bug 1969826 (https://bugs.launchpad.net/kolla- ansible/+bug/1969826) for details. Changes in kolla-ansible 14.3.0..14.4.0 --------------------------------------- 68ec08c03 [TrivialFix] Fix task name in Ironic config 938df6de9 Fix haproxy prechecks after deployment 3558ba61c keystone: Remove redundant 'when' c89bb9c08 [security] Make Ironic tftpd run as nobody 800bb53e7 Fix nova online volume resize with multipathd 2dcfbac6b Set the ironic notification level Diffstat (except docs and test files) ------------------------------------- ansible/roles/ironic/tasks/config.yml | 2 +- ansible/roles/ironic/templates/ironic-tftp.json.j2 | 2 +- ansible/roles/ironic/templates/ironic.conf.j2 | 4 ++++ ansible/roles/keystone/handlers/main.yml | 1 - ansible/roles/keystone/tasks/upgrade.yml | 1 - ansible/roles/loadbalancer/tasks/precheck.yml | 2 +- ansible/roles/multipathd/tasks/config.yml | 17 +++++++++++------ ansible/roles/multipathd/templates/multipath.conf.j2 | 2 +- releasenotes/notes/bug-1982777-0cac9753aa18a037.yaml | 8 ++++++++ ...st_function_creators-variables-8628098891513dac.yaml | 6 ++++++ .../ironic-notification-level-a23db99c66c4b752.yaml | 9 +++++++++ .../notes/ironic-tftp-nobody-835803ba36398ea3.yaml | 6 ++++++ 12 files changed, 48 insertions(+), 12 deletions(-)

1 0

kayobe 12.3.0 (yoga)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are glad to announce the release of: kayobe 12.3.0: Deployment of OpenStack to bare metal using OpenStack kolla and bifrost This release is part of the yoga stable release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/kayobe For more details, please see below. Changes in kayobe 12.2.0..12.3.0 -------------------------------- a58585fb Fix use of become_user by installing acl package 31b3a4dc Fix IP allocation limit in overcloud inventory discover c26ccca0 Remove unused parameter from seed container example 9b3d807c Update to latest Rocky Linux cloud image a1a8bbf0 ovn: add network group to neutron-ovn-metadata-agent Diffstat (except docs and test files) ------------------------------------- ansible/group_vars/all/infra-vms | 4 ++-- ansible/group_vars/all/seed | 1 - ansible/group_vars/all/seed-vm | 4 ++-- ansible/roles/dev-tools/defaults/main.yml | 3 +++ ansible/roles/kolla-ansible/templates/overcloud-services.j2 | 1 + ansible/roles/pip/tasks/pip_conf.yml | 9 --------- etc/kayobe/infra-vms.yml | 2 +- etc/kayobe/seed-vm.yml | 2 +- etc/kayobe/seed.yml | 1 - kayobe/cli/commands.py | 3 ++- releasenotes/notes/install-acl-package-0f21c110cd07537c.yaml | 6 ++++++ releasenotes/notes/rocky-linux-8.6-image-cb4cf2781f802fb1.yaml | 5 +++++ 13 files changed, 24 insertions(+), 18 deletions(-)

1 0

kolla 13.4.0 (xena)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We eagerly announce the release of: kolla 13.4.0: Kolla OpenStack Deployment This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 13.4.0 ^^^^^^ Bug Fixes * Fixes problems when running with docker-py >=6. LP#1988121 Changes in kolla 13.3.0..13.4.0 ------------------------------- bf4341973 mariadb: Fix RPM repository URLs Diffstat (except docs and test files) ------------------------------------- kolla/image/build.py | 11 ++++++++--- kolla/template/repos.yaml | 8 ++++---- releasenotes/notes/docker-6-6d77b5ff7ec1daef.yaml | 5 +++++ 5 files changed, 23 insertions(+), 13 deletions(-)

1 0

kolla-ansible 13.4.0 (xena)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We high-spiritedly announce the release of: kolla-ansible 13.4.0: Ansible Deployment of Kolla containers This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/kolla-ansible Download the package from: https://tarballs.openstack.org/kolla-ansible/ Please report issues through: https://bugs.launchpad.net/kolla-ansible/+bugs For more details, please see below. 13.4.0 ^^^^^^ Security Issues *************** * Kolla Ansible used to run Ironic's tftpd as an (unprivileged) root user. Now, it will explicitly use the nobody user. Bug Fixes ********* * Fixes 1982777. Set multipathd user_friendly_names to "no" to make os-brick able to resize volumes online. Adds ability to override multipathd config. LP#1982777 * Fixed bug #1987982 (https://bugs.launchpad.net/kolla- ansible/+bug/1987982) This bug caused the database log_bin_trust_function_creators variable not to be set back to "OFF" after a keystone upgrade. * Fixes an issue where ping might not be installed on some systems, causing HAProxy prechecks to fail. * If "ironic_enabled_notification_topics" is set to "true", "ironic_notification_level" is set to "info" in order to ensure that Ironic actually sends out notifications. See bug 1969826 (https://bugs.launchpad.net/kolla- ansible/+bug/1969826) for details. Changes in kolla-ansible 13.3.0..13.4.0 --------------------------------------- 36bfd107b Fix haproxy prechecks after deployment 62931b310 keystone: Remove redundant 'when' 488ea908e [security] Make Ironic tftpd run as nobody 394e7642f packages: install iputils for ping ede45e306 Fix nova online volume resize with multipathd afb51b2c4 Set the ironic notification level Diffstat (except docs and test files) ------------------------------------- ansible/roles/baremetal/defaults/main.yml | 2 ++ ansible/roles/ironic/templates/ironic-pxe.json.j2 | 2 +- ansible/roles/ironic/templates/ironic.conf.j2 | 4 ++++ ansible/roles/keystone/handlers/main.yml | 1 - ansible/roles/keystone/tasks/upgrade.yml | 1 - ansible/roles/loadbalancer/tasks/precheck.yml | 2 +- ansible/roles/multipathd/tasks/config.yml | 17 +++++++++++------ ansible/roles/multipathd/templates/multipath.conf.j2 | 2 +- releasenotes/notes/bug-1982777-0cac9753aa18a037.yaml | 8 ++++++++ ...st_function_creators-variables-8628098891513dac.yaml | 6 ++++++ .../notes/install-iputils-50da7016788f413c.yaml | 5 +++++ .../ironic-notification-level-a23db99c66c4b752.yaml | 9 +++++++++ .../notes/ironic-tftp-nobody-835803ba36398ea3.yaml | 6 ++++++ 13 files changed, 54 insertions(+), 11 deletions(-)

1 0

kayobe 10.4.0 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are glad to announce the release of: kayobe 10.4.0: Deployment of OpenStack to bare metal using OpenStack kolla and bifrost This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/kayobe For more details, please see below. Changes in kayobe 10.3.0..10.4.0 -------------------------------- 2eaaa85e Fix use of become_user by installing acl package 1d51438f Fix IP allocation limit in overcloud inventory discover 9a7fdc42 Remove unused parameter from seed container example dcdbceac ovn: add network group to neutron-ovn-metadata-agent Diffstat (except docs and test files) ------------------------------------- ansible/group_vars/all/seed | 1 - ansible/roles/dev-tools/defaults/main.yml | 3 +++ ansible/roles/kolla-ansible/templates/overcloud-services.j2 | 1 + ansible/roles/pip/tasks/pip_conf.yml | 9 --------- etc/kayobe/seed.yml | 1 - kayobe/cli/commands.py | 3 ++- releasenotes/notes/install-acl-package-0f21c110cd07537c.yaml | 6 ++++++ 8 files changed, 13 insertions(+), 12 deletions(-)

1 0

kayobe 11.3.0 (xena)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are delighted to announce the release of: kayobe 11.3.0: Deployment of OpenStack to bare metal using OpenStack kolla and bifrost This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/kayobe Download the package from: https://tarballs.openstack.org/kayobe/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/kayobe For more details, please see below. Changes in kayobe 11.2.0..11.3.0 -------------------------------- b3186a22 Fix use of become_user by installing acl package 0b92d645 Fix IP allocation limit in overcloud inventory discover c709806b Remove unused parameter from seed container example 7c46f57d Update to latest Rocky Linux cloud image ac89fd05 ovn: add network group to neutron-ovn-metadata-agent Diffstat (except docs and test files) ------------------------------------- ansible/group_vars/all/infra-vms | 4 ++-- ansible/group_vars/all/seed | 1 - ansible/group_vars/all/seed-vm | 4 ++-- ansible/roles/dev-tools/defaults/main.yml | 3 +++ ansible/roles/kolla-ansible/templates/overcloud-services.j2 | 1 + ansible/roles/pip/tasks/pip_conf.yml | 9 --------- etc/kayobe/infra-vms.yml | 2 +- etc/kayobe/seed-vm.yml | 2 +- etc/kayobe/seed.yml | 1 - kayobe/cli/commands.py | 3 ++- releasenotes/notes/install-acl-package-0f21c110cd07537c.yaml | 6 ++++++ releasenotes/notes/rocky-linux-8.6-image-cb4cf2781f802fb1.yaml | 5 +++++ 13 files changed, 24 insertions(+), 18 deletions(-)

1 0

kolla 12.5.0 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are pumped to announce the release of: kolla 12.5.0: Kolla OpenStack Deployment This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/kolla Download the package from: https://tarballs.openstack.org/kolla/ Please report issues through: https://bugs.launchpad.net/kolla/+bugs For more details, please see below. 12.5.0 ^^^^^^ Bug Fixes * Fixes CentOS builds of Skydive SEGV on startup. Skydive versions prior to 0.28.0 panic on newer versions of libc. This especially affects Centos 8. LP#1940862 * Fixes problems when running with docker-py >=6. LP#1988121 Changes in kolla 12.4.0..12.5.0 ------------------------------- b64e71746 mariadb: Fix repository URLs a7b00b08c Bump skydive version to 0.28 Diffstat (except docs and test files) ------------------------------------- kolla/image/build.py | 11 ++++++++--- kolla/template/repos.yaml | 8 ++++---- releasenotes/notes/bug-1940862-8fd12d669ab15299.yaml | 7 +++++++ releasenotes/notes/docker-6-6d77b5ff7ec1daef.yaml | 5 +++++ 5 files changed, 25 insertions(+), 8 deletions(-)

1 0

puppet-ceph 4.0.0
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are excited to announce the release of: puppet-ceph 4.0.0: Puppet module for Ceph The source is available from: https://opendev.org/openstack/puppet-ceph Download the package from: https://tarballs.openstack.org/puppet-ceph/ For more details, please see below. 4.0.0 ^^^^^ New Features ************ * Now this module supports setting up the Ceph Object Gateway service with the beast HTTP frontend library. * Now this modules officially supports CentOS 9 and Red Hat Enterprise Linux 9. * The new "ceph::repo::stream" parameter has been added. Set this parameter to "true" when CentOS Stream and SIG repository are used. * Now the "ceph_config" resource type supports the new "secret" property. When this property is set to "true", value of the parameter is hidden from puppet logs. * The new "ceph::rgw::barbican" defined resource type has been added. This allows managing settings for Barbican integration of Ceph Object Gateway. * The "ceph::rgw" class now supports the following new parameters. * "rgw_swift_url_prefix" * "rgw_swift_account_in_url" * "rgw_swift_versioning_enabled" * "rgw_trust_forwarded_https" * The new "ceph::rgw::rgw_enable_apis" parameter has been added. Upgrade Notes ************* * The puppet-ceph module no longer depends on any sysctl module thus the dependency on duritong/sysctl module is removed and not needed anymore. * Fedora is no longer supported. * Ubuntu 16.04 (Xenial) is no longer supported. Deprecation Notes ***************** * The pid_max parameter in classes ceph::osds and ceph::profile::params is deprecated and no longer used. Changes in puppet-ceph 3.1.1..4.0.0 ----------------------------------- 75c5a7c rgw: Support Barbican integration settings f99525a Prepare puppet-ceph 4.0.0 721bfde Add back support for Puppet 5.x b0b0727 Do not override supported OS fa2d4ea Add CentOS 9 and RHEL 9 to supported operating systems 1800c1b rgw: Add support for rgw_enable_apis dbee5ba rgw: support more Swift-related options a41c255 rgw: Add suport for the beast frontend library 152b6f6 Remove support for upstart cedbe91 rgw: Refactor the logic to support multiple fronend_type 29ca5f4 Use integer for apache::vhost::port 0d28ee1 Bump upper version of puppetlabs-apt aeb5f40 Update source url to opendev 81a137e Remove workaround for old p-o-i manifest b0c34c7 Release 3.2.1 379aacd Add back CentOS/RHEL 7 to supported operating systems 08be8ee Remove support for Ubuntu 16.04 (Xenial) 039ef5e Fix CentOS Stream 9 repo url 82343e1 setuptools: Disable auto discovery c9dc5ce remove unicode literal from code f17e540 Release 3.2.0 e13544a CentOS: Allow fixing repository url for CentOS Stream 92da935 Add unit tests of ceph::rgw::keystone::auth 201e8b1 Deprecated pid_max and remove sysctl module dependency ab0d7ee Hide credential strings from puppet logs 72584e5 Bump upper versions 6d0e6b9 Remove workaround for issue caused by default ldap secret 5c3065d Fix unit test failure with recent puppetlabs-inifile 56d0441 Add information technology in the setup.cfg 6fb9f32 Add license information in the setup.cfg 6e154ae Delete useless code for setup.py 9e7ebff Stop configuring install_command in tox. a34f7a2 Fix pbr>=2.0.0 for setup.py 7ce9ab1 Update openstackdocstheme to the latest version 1afd64b Update reno to the latest version 3a1a8bb Support Puppet 7 6edfc34 Drop Fedora support 37b0c20 Set fixture paths for unit tests 9086108 Update IRC network to OFTC a733e34 setup.cfg: Replace dashes with underscores 2960cfa Fix lint errors with the latest lint packages 312521b Bump dependency in metadata.json ed72ec6 Update sphinx to the latest version 30bb45c Add Ubuntu Focal to the supporrted operating systesm 74c6983 Replace deprecated UPPER_CONSTRAINTS_FILE variable 105b71e Set openstackdocs_auto_name to use 'project' as name 9243448 Remove beaker 03784dd Use openstack_spec_helper from zuul checkout 3b8ab1f Switch to newer openstackdocstheme and reno versions 12ccc2f Update Puppet requirement to >= 6.0.0 Diffstat (except docs and test files) ------------------------------------- Gemfile | 19 +- README.md | 39 +- lib/puppet/type/ceph_config.rb | 24 ++ manifests/init.pp | 17 +- manifests/mirror.pp | 16 +- manifests/mon.pp | 30 +- manifests/osds.pp | 20 +- manifests/profile/params.pp | 36 +- manifests/repo.pp | 90 ++-- manifests/rgw.pp | 148 ++++--- manifests/rgw/apache_proxy_fcgi.pp | 2 +- manifests/rgw/barbican.pp | 66 +++ manifests/rgw/beast.pp | 35 ++ manifests/rgw/keystone.pp | 12 +- metadata.json | 36 +- releasenotes/notes/beast-d0eb1bcd637ca8ca.yaml | 5 + releasenotes/notes/centos-9-70ff1af03a392fab.yaml | 5 + .../notes/centos-stream-a43a0bbe65cf2aa8.yaml | 5 + .../notes/ceph_config-secret-211b7aa50e393b47.yaml | 6 + .../notes/deprecate-pid-max-a891b20388920412.yaml | 9 + .../notes/drop-fedora-01b1484406c0c888.yaml | 4 + .../remove-ubuntu-xenial-7f1352a0873b0d0c.yaml | 4 + .../notes/rgw-barbican-5007bb33d9b0df6a.yaml | 5 + .../notes/rgw-swift-opts-471757ed33cd8853.yaml | 9 + .../notes/rgw_enable_apis-a3600da8af1d7759.yaml | 4 + releasenotes/source/conf.py | 23 +- setup.cfg | 8 +- setup.py | 5 +- spec/acceptance/ceph_mon_osd_spec.rb | 19 +- spec/acceptance/nodesets/centos-70-x64.yml | 15 - spec/acceptance/nodesets/default.yml | 22 - spec/acceptance/nodesets/nodepool-centos7.yml | 13 - spec/acceptance/nodesets/nodepool-centos8.yml | 10 - spec/acceptance/nodesets/nodepool-trusty.yml | 13 - spec/acceptance/nodesets/nodepool-xenial.yml | 13 - spec/acceptance/nodesets/two-centos-70-x64.yml | 22 - .../nodesets/two-ubuntu-server-1404-x64.yml | 22 - .../acceptance/nodesets/ubuntu-server-1404-x64.yml | 15 - spec/classes/ceph_conf_spec.rb | 4 +- spec/classes/ceph_init_spec.rb | 4 +- spec/classes/ceph_mds_spec.rb | 4 +- spec/classes/ceph_mons_spec.rb | 4 +- spec/classes/ceph_osds_spec.rb | 16 +- spec/classes/ceph_profile_fs_spec.rb | 4 +- spec/classes/ceph_profile_mds_spec.rb | 4 +- spec/classes/ceph_repo_spec.rb | 268 +++++------- spec/classes/ceph_rgw_keystone_auth_spec.rb | 54 +++ spec/defines/ceph_fs_spec.rb | 4 +- spec/defines/ceph_key_spec.rb | 4 +- spec/defines/ceph_mgr_spec.rb | 4 +- spec/defines/ceph_mon_spec.rb | 473 +-------------------- spec/defines/ceph_osd_spec.rb | 4 +- spec/defines/ceph_pool_spec.rb | 4 +- spec/defines/ceph_rbd_mirror_spec.rb | 31 +- spec/defines/ceph_rgw_apache_proxy_fcgi_spec.rb | 109 +---- spec/defines/ceph_rgw_barbican_spec.rb | 91 ++++ spec/defines/ceph_rgw_beast_spec.rb | 95 +++++ spec/defines/ceph_rgw_civetweb_spec.rb | 4 +- spec/defines/ceph_rgw_keystone_spec.rb | 8 +- spec/defines/ceph_rgw_spec.rb | 223 ++-------- spec/spec_helper.rb | 5 +- spec/spec_helper_acceptance.rb | 2 +- spec/unit/provider/ceph_config/ini_setting_spec.rb | 1 - tox.ini | 4 +- 65 files changed, 857 insertions(+), 1423 deletions(-)

1 0

monasca-agent 5.0.1 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We joyfully announce the release of: monasca-agent 5.0.1: Monitoring agent for gathering metrics and sending them to the Monasca API. This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/monasca-agent Download the package from: https://tarballs.openstack.org/monasca-agent/ Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in monasca-agent 5.0.0..5.0.1 ------------------------------------- 8547772 Add a condition for systemd service detection in monasca_setup 9f41544 Fix Monasca-Setup Keystone detection 7cfbf4b Fix PY3 issue e55a499 Fix Docker builds 3e1de07 Re-enable Docker Zuul jobs b31b695 Update docker-publish.yml for stable/wallaby ed4ebf1 Update TOX_CONSTRAINTS_FILE for stable/wallaby 37dedf3 Update .gitreview for stable/wallaby Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + monasca_agent/collector/checks_d/mysql.py | 2 +- monasca_setup/detection/plugins/keystone.py | 5 ++++- monasca_setup/main.py | 10 ++++++---- playbooks/docker-publish.yml | 6 +++--- tox.ini | 2 +- 10 files changed, 20 insertions(+), 14 deletions(-)

1 0

monasca-notification 4.0.1 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We are glad to announce the release of: monasca-notification 4.0.1: Reads alarms from Kafka and then notifies the customer using their configured notification method. This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/monasca-notification Download the package from: https://tarballs.openstack.org/monasca-notification/ Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in monasca-notification 4.0.0..4.0.1 -------------------------------------------- b7f8792 Set specific monasca-common base image for Wallaby a837e58 Fix Grafana URL in email notification def8f84 Re-enable Docker Zuul jobs 61179e9 Update docker-publish.yml for stable/wallaby 01c4738 Update TOX_CONSTRAINTS_FILE for stable/wallaby ba29bc2 Update .gitreview for stable/wallaby Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + monasca_notification/plugins/email_notifier.py | 2 +- playbooks/docker-publish.yml | 2 +- tox.ini | 2 +- 6 files changed, 6 insertions(+), 5 deletions(-)

1 0

monasca-ui 4.1.0 (wallaby)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We contentedly announce the release of: monasca-ui 4.1.0: Monasca Plugin for Horizon This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/monasca-ui Download the package from: https://tarballs.openstack.org/monasca-ui/ Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in monasca-ui 4.0.0..4.1.0 ---------------------------------- 8eef491 Change policy file format to yaml 600ed69 Remove prefix 'dim_' from dimensions in Drilldown Dashboard e4d7fc8 Convert dimension value type from byte to str in MonascaProxyView 38ba35e Add missing PY3 support in overview views 8a55129 Bump decorator version in lower-constraints.txt b48d81d Update TOX_CONSTRAINTS_FILE for stable/wallaby a49a34a Update .gitreview for stable/wallaby Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + README.rst | 8 ++++---- lower-constraints.txt | 2 +- monitoring/alarms/tables.py | 2 +- monitoring/conf/monitoring_policy.json | 8 -------- monitoring/conf/monitoring_policy.yaml | 4 ++++ monitoring/config/local_settings.py | 2 +- monitoring/overview/views.py | 6 ++++-- requirements.txt | 2 +- tox.ini | 2 +- 10 files changed, 18 insertions(+), 19 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 4b0c404..8deb324 100644 --- a/requirements.txt +++ b/requirements.txt @@ -6 +6 @@ python-monascaclient>=1.8.0 # Apache-2.0 -horizon>=17.1.0 # Apache-2.0 +horizon>=18.3.0 # Apache-2.0

1 0

python-novaclient 18.1.0 (zed)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We exuberantly announce the release of: python-novaclient 18.1.0: Client library for OpenStack Compute API This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-novaclient Download the package from: https://pypi.org/project/python-novaclient Please report issues through: https://bugs.launchpad.net/python-novaclient/+bugs For more details, please see below. 18.1.0 ^^^^^^ New Features * Support has been added for microversion 2.92. This microversion only accepts to import a public key and no longer to generate one, hence now the public_key parameter be mandatory. (https://docs.openstack.org/nova/latest/reference/api-microversion- history.html#microversion-2-92) * Support has been added for microversion 2.91. This microversion allows specifying a destination host to unshelve a shelve offloaded server. And availability zone can be set to None to unpin the availability zone of a server. (https://docs.openstack.org/nova/latest/reference/api-microversion- history.html#microversion-2-91) Changes in python-novaclient 18.0.0..18.1.0 ------------------------------------------- be9517cb Fix a fixture for keypairs tests 2b5d9899 Add support for 2.92 : keypair import mandatory ee9b277c Microversion 2.91: Support specifying destination host to unshelve 4d4cdb49 Imported Translations from Zanata d867ef65 Replace old URLs with new ones 81dece81 Imported Translations from Zanata Diffstat (except docs and test files) ------------------------------------- README.rst | 4 +- bindep.txt | 2 +- novaclient/__init__.py | 2 +- novaclient/v2/keypairs.py | 19 +- novaclient/v2/servers.py | 65 ++++- ...eypair-generation-removal-1b5d84a8906d3918.yaml | 8 + .../bp-unshelve-to-host-b220131a00dff8a2.yaml | 9 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 267 +++++++++++++++++++++ 14 files changed, 515 insertions(+), 11 deletions(-)

1 0

python-monascaclient 2.6.0 (zed)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We eagerly announce the release of: python-monascaclient 2.6.0: Monasca API Client Library This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-monascaclient Download the package from: https://pypi.org/project/python-monascaclient Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in python-monascaclient 2.5.0..2.6.0 -------------------------------------------- bb7d4b6 Drop lower-constraints.txt and its testing 46c852b Add Python3 zed unit tests a6de158 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 3 +- lower-constraints.txt | 72 ------------------------------------------- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 ++++ requirements.txt | 4 +++ tox.ini | 6 ---- 6 files changed, 12 insertions(+), 80 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index f2f449b..a103be8 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. +

1 0

python-muranoclient 2.5.0 (zed)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We contentedly announce the release of: python-muranoclient 2.5.0: python-muranoclient This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-muranoclient Download the package from: https://pypi.org/project/python-muranoclient Please report issues through: https://bugs.launchpad.net/python-muranoclient/+bugs For more details, please see below. Changes in python-muranoclient 2.4.1..2.5.0 ------------------------------------------- fdbec7b Add Python3 zed unit tests 91ea416 Imported Translations from Zanata eabfc58 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- releasenotes/source/index.rst | 1 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 38 ++++++++++++++++++++-- releasenotes/source/yoga.rst | 6 ++++ 4 files changed, 44 insertions(+), 3 deletions(-)

1 0

python-solumclient 3.6.1 (zed)
by no-reply＠openstack.org 01 Sep '22

01 Sep '22

We enthusiastically announce the release of: python-solumclient 3.6.1: Client library for Solum API This release is part of the zed release series. The source is available from: https://opendev.org/openstack/python-solumclient Download the package from: https://tarballs.openstack.org/python-solumclient/ Please report issues through: https://bugs.launchpad.net/python-solumclient/+bugs For more details, please see below. Changes in python-solumclient 3.6.0..3.6.1 ------------------------------------------ 319a84d Drop lower-constraints.txt and its testing Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 3 +- lower-constraints.txt | 102 -------------------------------------------------- requirements.txt | 4 ++ tox.ini | 6 --- 4 files changed, 5 insertions(+), 110 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 4655d24..fdcc360 100644 --- a/requirements.txt +++ b/requirements.txt @@ -0,0 +1,4 @@ +# Requirements lower bounds listed here are our best effort to keep them up to +# date but we do not test them so no guarantee of having them all correct. If +# you find any incorrect lower bounds, let us know or propose a fix. +

1 0