September 2022 - Release-announce

openstack-heat 19.0.0.0rc2 (zed)
by no-reply＠openstack.org 28 Sep '22

28 Sep '22

Hello everyone, A new release candidate for openstack-heat for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/openstack-heat/src/branch/stable/zed Release notes for openstack-heat can be found at: https://docs.openstack.org/releasenotes/heat/

1 0

python-watcher 9.0.0.0rc2 (zed)
by no-reply＠openstack.org 27 Sep '22

27 Sep '22

Hello everyone, A new release candidate for python-watcher for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/python-watcher/src/branch/stable/zed Release notes for python-watcher can be found at: https://docs.openstack.org/releasenotes/watcher/

1 0

barbican 15.0.0.0rc1 (zed)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

Hello everyone, A new release candidate for barbican for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/barbican/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/barbican/src/branch/stable/zed Release notes for barbican can be found at: https://docs.openstack.org/releasenotes/barbican/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/barbican/+bugs and tag it *zed-rc-potential* to bring it to the barbican release crew's attention.

1 0

cloudkitty 17.0.0.0rc2 (zed)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

Hello everyone, A new release candidate for cloudkitty for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/cloudkitty/src/branch/stable/zed Release notes for cloudkitty can be found at: https://docs.openstack.org/releasenotes/cloudkitty/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty and tag it *zed-rc-potential* to bring it to the cloudkitty release crew's attention.

1 0

neutron-tempest-plugin 2.0.0 (zed)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

We joyfully announce the release of: neutron-tempest-plugin 2.0.0: Tempest plugin for Neutron Project This release is part of the zed release series. The source is available from: https://opendev.org/openstack/neutron-tempest-plugin Download the package from: https://tarballs.openstack.org/neutron-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/neutron/+bugs For more details, please see below. Changes in neutron-tempest-plugin 1.9.0..2.0.0 ---------------------------------------------- 909402b Remove "dhcp_agent_scheduler" API extension from common list 23e9848 Add job definitions for Zed branch b8e69d3 Run master scenario/api jobs on api test updates bdacaa2 list floating ip api contains port forwarding id 02e4fbc skip some port_forwarding test 14d9215 Create extra external network with address scope for `ndp proxy` tests 352a641 Remove nose from dependencies 3de3cd9 Retrieve the DSCP valid marks from the API 1472917 Stein: fix failing jobs 5684d5e Use StatefulConnection class to verify connectivity in SG tests 305ea4a Make the StatefulConnection class to work with priviliged ports 1112266 Delete tcp rule from a security group e323001 Add a test for removing security group from ACTIVE instance 22173b8 Enable execution of experimental linuxbridge job 9853a01 Bump swap to 2GB in linuxbridge/openvswitch jobs 2936a29 Add ndp proxy API tests 8ad510e Remove unicode literal from code 823b1a0 Set mac inside vm to the vlan interface aecc32a Skip tempest jobs on functional roles/playbooks changes 34bd09c Fix Train neutron-tempest-plugin api job 935e0a3 Pin neutron-tempest-plugin for ussuri/victoria jobs 8988a01 Consolidate neutron-tempest-plugin-api with scenario jobs 91821d2 Add irrelevant files for fwaas job fc37604 taas: use ssh_key_type from config for taas scenario 13546b8 Remove "distutils" library 68596be [OVS] Add "openflow_processed_per_port=True" to OVS scenario 7c09d72 Make test test_remove_associated_ports to be compatible with L3HA f10618e Fix wrong exceptions import from test_metadata ee00742 Collect ovn/ovs logs and ovn dbs 46fa424 Print VM console output upon different exceptions 712d07c [fwaas] Remove _create_subnet & setup_clients d83cfcf [fwaas] Remove get_remote_client & check_vm_connectivity 3fe3a90 Exclude test test_floatingip_port_details from the Linuxbridge job 2ef3067 [bgpvpn] Remove get_remote_client c96f065 [bgpvpn] Remove setup_clients method 46d4dda [bgpvpn] Replace security groups related methods b7fd90e [fwaas] Remove _get_server_port_id_and_ip4 & create_floating_ip 8235e3b [bgpvpn] Make _create_loginable_secgroup_rule public 1d9e28b [bgpvpn] Remove _get_server_port_id_and_ip4 & create_floating_ip c699091 [fwaas] Remove _log_console_output & ping_ip_address 7d4300c [fwaas] Remove create_server & _create_network 6203126 [fwaas] Remove secgroup creation related methods 763567e [bgpvpn] Remove _create_network & _log_console_output fd509eb [bgpvpn] Remove _create_port & create_keypair 784f819 [fwaas] Remove _create_port & create_keypair 3a1406a [fwaas] Remove unused methods 9198d02 [bgpvpn] Remove unused scenario.manager methods edea483 [sfc] Remove setup_clients method 12cd47a [sfc] Remove _get_server_port_id_and_ip4 & check_vm_connectivity 97ceb4e [sfc] Remove _get_router & _create_network 1bf4f93 [sfc] Remove _create_subnet & _check_tenant_network_connectivity 17587c3 [sfc] Remove create_networks & create_floating_ip 9aa4811 [sfc] Remove _get_network_by_name & check_floating_ip_status 96e9090 [sfc] Remove _log_console_output & ping_ip_address fb61ddb [sfc] Remove create_server & get_remote_client e3c3908 [sfc] Remove _create_port & create_keypair e800f7b [sfc] Remove unused router related methods f0ee14f [sfc] Remove unused sec groups methods 1ee1c15 [sfc] Remove unused check_remote_connectivity methods f0e89f4 [sfc] Remove unused floating ip methods f70acd1 Test dns_assignment with external dns integration 93f1e9b [OVN] Pin OVS version for OVN v21.06.0 a4978bc CI: Fix typo for override-checkout and branch_override a3a807a Add job definitions for Yoga branch 1f275e4 Add tap-as-a-service scenario tests Diffstat (except docs and test files) ------------------------------------- .gitignore | 1 - neutron_tempest_plugin/api/base.py | 46 ++ neutron_tempest_plugin/api/test_ndp_proxy.py | 110 +++ .../api/test_ndp_proxy_negative.py | 135 ++++ .../api/test_port_forwardings.py | 5 + neutron_tempest_plugin/api/test_qos.py | 25 +- .../api/test_routers_negative.py | 9 +- neutron_tempest_plugin/bgpvpn/scenario/manager.py | 729 +------------------ .../bgpvpn/scenario/test_bgpvpn_basic.py | 21 +- neutron_tempest_plugin/common/ip.py | 11 +- neutron_tempest_plugin/common/utils.py | 36 +- neutron_tempest_plugin/config.py | 19 + .../fwaas/scenario/fwaas_v2_manager.py | 801 +-------------------- .../fwaas/scenario/test_fwaas_v2.py | 6 +- neutron_tempest_plugin/scenario/base.py | 55 +- .../scenario/test_dns_integration.py | 5 + .../scenario/test_mac_learning.py | 4 +- neutron_tempest_plugin/scenario/test_metadata.py | 2 +- neutron_tempest_plugin/scenario/test_multicast.py | 4 +- .../scenario/test_security_groups.py | 71 +- .../services/network/json/network_client.py | 43 ++ .../tap_as_a_service/scenario/__init__.py | 0 .../tap_as_a_service/scenario/manager.py | 293 ++++++++ .../tap_as_a_service/scenario/test_taas.py | 249 +++++++ .../scenario/test_traffic_impact.py | 264 +++++++ releasenotes/source/conf.py | 14 +- requirements.txt | 2 +- zuul.d/base-nested-switch.yaml | 6 +- zuul.d/base.yaml | 127 ---- zuul.d/master_jobs.yaml | 302 ++++++-- zuul.d/project.yaml | 76 +- zuul.d/queens_jobs.yaml | 16 +- zuul.d/rocky_jobs.yaml | 26 +- zuul.d/stein_jobs.yaml | 26 +- zuul.d/train_jobs.yaml | 28 +- zuul.d/ussuri_jobs.yaml | 40 +- zuul.d/victoria_jobs.yaml | 90 ++- zuul.d/wallaby_jobs.yaml | 32 +- zuul.d/xena_jobs.yaml | 32 +- zuul.d/yoga_jobs.yaml | 231 ++++++ zuul.d/zed_jobs.yaml | 249 +++++++ 44 files changed, 2410 insertions(+), 2633 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 21f14cc..34531e9 100644 --- a/requirements.txt +++ b/requirements.txt @@ -12,0 +13 @@ oslo.utils>=3.33.0 # Apache-2.0 +packaging>=20.4 # Apache-2.0 @@ -17 +17,0 @@ ddt>=1.0.1 # MIT -nose>=1.3.7 # LGPL

1 0

python-tripleoclient 16.5.0 (wallaby)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

We enthusiastically announce the release of: python-tripleoclient 16.5.0: TripleO client This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/python-tripleoclient Download the package from: https://tarballs.openstack.org/python-tripleoclient/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. 16.5.0 ^^^^^^ Prelude ******* During a minor update of the overcloud. It was previously necessary to execute 3 steps. - Update Prepare - Update Run - Update Converge Starting in W, it is no longer necessary to perform a Stack update during the converge. This change removes the stack update from the converge step. Now, we will just run the deploy_steps_playbook instead. New Features ************ * Added options for "overcloud delete" command to unprovision networks provisioned with "overcloud deploy" or with "overcloud network provision". * Added options for "overcloud delete" command to unprovision nodes and network ports provisioned with "overcloud deploy". * The Admin Authorize command can now be targeted at specific nodes using '--limit'. It can also take a custom static-inventory using ' --static-inventory'. * The commands *openstack overcloud node import* and *openstack overcloud node configure* now have a --boot-mode arguement which allows the boot mode for all affected nodes to be set to UEFI boot (uefi) or legacy BIOS boot (bios). This allows some nodes to have a different boot mode to the default (uefi). * Two new commands, "openstack overcloud ceph user enable" and "openstack overcloud ceph user disable" are added. The "enable" option will create the cephadm SSH user and distribute their SSH keys to Ceph nodes in the overcloud. The "disable" option may be run after "openstack overcloud ceph deploy" has been run to disable cephadm so that it may not be used to administer the Ceph cluster and no "ceph orch ..." CLI commands will function. This will also prevent Ceph node overcloud scale operations though the Ceph cluster will still be able to read/write data. The "ceph user disable" option will also remove the public and private SSH keys of the cephadm SSH user on overclouds which host Ceph. The "ceph user enable" option may also be used to re-distribute the public and private SSH keys of the cephadm SSH user and re-enable the cephadm mgr module. * A new command "openstack overcloud ceph deploy" is added. The command is used to deploy Ceph after the hardware has been provisioned with networking and before the overcloud is deployed. The command takes the output of "openstack overcloud node provision" as input and returns a Heat enviornment file, e.g. deployed_ceph.yaml, as output. The deployed_ceph.yaml file may then be passed to the "openstack overcloud deploy" command as input. During overcloud deployment the Ceph cluster is then configured to host OpenStack. E.g. cephx keys and pools are still created on the Ceph cluster by "openstack overcloud deploy". * The cli arguments that control what parts of the deployment to execute have been refactored to better align with the user expected intention, --stack-only: create the stack, download the config. no overcloud node changes --setup-only: ssh admin authorization setup. --config-download-only: run config-download playbook(s) to configure the overcloud. Deprecation Notes ***************** * The "--local" argument to the "openstack overcloud image upload" command has been deprecated and a "--no-local" argument has been added. Earlier we used to fallback to upload locally when glance was not available. As glance is not installed in the undercloud by default, we would upload images locally unless "--no-local" is used. * The "openstack tripleo validator" CLI has been deprecated in favor the "validation" CLI. +--------------------------------------------+---------------------------+ | Old CLI sub commands | New CLI sub commands | +--------------------------------------------+---------------------------+ | openstack tripleo validator list | validation list | | openstack tripleo validator show | validation show | | openstack tripleo validator group info | validation show group | | openstack tripleo validator show parameter | validation show parameter | | openstack tripleo validator show history | validation history list | | openstack tripleo validator show run | validation history get | +--------------------------------------------+---------------------------+ Bug Fixes ********* * Fixes Admin Authorize to work with Ephemeral Heat. Other Notes *********** * Stack outputs that are needed by other functionality of the overcloud deployment are now saved in the stack working directory in an outputs subdirectory (default ~/overcloud- deploy/<stack>/outputs). Changes in python-tripleoclient 16.4.0..16.5.0 ---------------------------------------------- 6c76392b Changing MD5 hash to SHA512 015e0226 Adding --repo-dir argument fe6ed229 Fix overcloud node provide 96fae228 Check old passwords file path during uc validation 0aefaf3f Write clouds.yaml/heatrc for tripleo launch heat c8701473 Fix deploy templates arg validation 60ce1c06 Use 127.0.0.1 for ephemeral Heat server instead of ctlplane ip c41459a6 Handle missing ipv6 boolean in network_data.yaml for Ceph c2e4b487 overcloud node extract provisioned - fixed_ips 4e2ba687 node extract provisioned - use network_config_update 86483150 Don't assume json network config in validations a1912be8 Don't set 'subnet' for ctlplane in node extract 8aeed5ec Don't run playbooks if role count == 0 003c96b9 Add the ability to enable/disable cephadm SSH user 06a82e0e make net_config_override of undercloud.conf work with yaml eadbcec0 Use netaddr when comparing local_ip for changes 8223cb7c Fix ports cleanup on node unprovision 8baae032 Skip Heat pod container image pull for default ephemeral heat images fa9dcd54 Pass crush hierarchy data as extra_var 96d37480 Donot install policycoreutils-python for cs9 e84c2e11 Fix the validations_log_basedir overriding 1de4a4e3 Set Ceph ms_bind options for IPv6 ac828a2c Support custom network names with deployed ceph 7dc140b7 bnr CLI enable the conf. of ReaR with ironic on nodes 7ba9e8b3 [WALLABY-ONLY] Deprecation of the "openstack tripleo validator" CLI 293b8434 UC/Standalone - Set ip_version in DeployedServerPortMap 914709dd Ensure we're using the stackname for the inventory d71f64ed Integrating restoration process to client 03221f21 Remove --skip-nodes-and-networks fd18a8ea Replace deprecated params in prepare d4223329 Remove update converge bdfcb56d Refactor --stack-only, --setup-only, --config-download-only e2f3acd1 Add additional saved stack outputs 6da69f44 Save needed stack outputs in working_dir e5b308ee Fix --stack-only to download ansible playbooks bcbe3c1f Update playbooks to use consistent working dir b4cb0064 Fix overcloud admin authorize 71633a13 Fix node scaling for Ephemeral Heat f43317cb Baremetal deploy - user playbook interface c22f23a0 Drop minion 3e9c1926 Deprecate and ignore --skip-nodes-and-networks cfcc4a16 Always run growvols playbook after provision ce676979 Add --boot-mode to import and configure d62bdace Only use undercloud.conf ipxe_enabled for inspection ba988230 Don't write <stack_name>-passwords.conf 8328e7b1 Check for passwords at old path during tripleo deploy ea2877f1 Image upload: handle whole-disk image as default 6ed5f201 Deprecate overcloud image upload to glance 1e1394a6 Drop python2 logic for upgrades 18a30e62 Use real tmpdir for ansible runner tests 4a0be73b bnr enabled ramdisk as deploy interfaces on the ironic/undercloud 64732f93 Remove ipxe_enabled ppc64le validation 86584175 Remove zaqar ff41e5dd Remove mistral 42f9f7a4 Deprecate network data v1 definition 3d615ea4 Dynamic defaults for roles, networks, vips and bm cf63f0da Update deployment status after upgrade converge e97d9e7b Fix update run for Ephemeral Heat 7b9bf2fe Return "overcloud status" output without debug b0537457 Update overcloud deploy help for default heat type 592c793f Add `--heat-type` in overcloud delete ef151db5 Eliminating a race condition in the export_stack function 351bc64f Allow to pass arbitrary parameters to TCIB image config 06c7d4d3 Add network unprovision to overcloud delete 3351ef1c Update default images for "tripleo launch heat" d35ec2fb New test case and documentation for the export_stack function. e1c2fc73 Setting upper constraints to wallaby branch of requirements 1450b166 Moving the 'export_data' dict into constants ea451c4d Add node, port unprovision to overcloud delete a5d144ff Introduce "openstack overcloud ceph deploy" e81ced6f Restore kernel and ramdisk arguments to node configure 13f7f2fc Fetch stack after updating it bf7392db Make the "success" message more "success"-like b437a87e Workaround py36 encoding pip bug 7e490d4f Use 'all' for ANSIBLE_VARS_PLUGIN_STAGE a88ba376 Remove deprecation warnings for the role command 06184adb Fix get_deployment_status() for ephemeral heat 035f9b6a Remove name parameter from cell export 2c5b1cc5 Deprecate --network-ports, enable it by default 40e6f60c Implement protected resource types 7f6ac642 Fix 'cell export' no attribute exception Diffstat (except docs and test files) ------------------------------------- bindep.txt | 2 +- ...rovision-overcloud-delete-5c36ff706ab809ea.yaml | 5 + ...rovision-overcloud-delete-c7dd063912d4ebca.yaml | 5 + ..._args_for_admin_authorize-2fe6945515dd34a7.yaml | 9 + releasenotes/notes/boot_mode-ef25d1a032dcae56.yaml | 7 + ...ser_disable_and_re_enable-18f3102031a802d0.yaml | 17 + ...ecate-glance-image-upload-ef23d3078f430ccf.yaml | 9 + ...ack-tripleo-validator-cli-2612ab3234f506b0.yaml | 18 + ...hemeral-heat-minor-update-db24c2f190c1c8a7.yaml | 10 + .../overcloud_ceph_deploy-485f59b64eb93c70.yaml | 11 + .../refactor-only-cli-args-cb70ed8ba8b166a9.yaml | 10 + .../notes/save-stack-outputs-61c2ad9528ae2529.yaml | 5 + releasenotes/source/index.rst | 1 + releasenotes/source/wallaby.rst | 6 + requirements.txt | 2 +- setup.cfg | 22 +- tox.ini | 35 +- tripleoclient/config/minion.py | 158 ----- tripleoclient/config/standalone.py | 12 +- tripleoclient/config/undercloud.py | 7 +- tripleoclient/constants.py | 47 +- tripleoclient/exceptions.py | 4 + tripleoclient/export.py | 73 +- tripleoclient/heat_launcher.py | 17 +- tripleoclient/plugin.py | 73 -- .../v1/overcloud_deploy/test_overcloud_deploy.py | 117 +++- .../v1/overcloud_image/test_overcloud_image.py | 101 ++- .../minion => overcloud_restore}/__init__.py | 0 .../v1/overcloud_update/test_overcloud_update.py | 35 - .../v1/overcloud_upgrade/test_overcloud_upgrade.py | 4 +- .../test_tripleo_container_image.py | 30 +- .../v2/overcloud_delete/test_overcloud_delete.py | 81 ++- .../v2/overcloud_network/test_overcloud_network.py | 6 + tripleoclient/utils.py | 534 +++++++++++++-- tripleoclient/v1/minion_config.py | 421 ------------ tripleoclient/v1/overcloud_admin.py | 62 +- tripleoclient/v1/overcloud_backup.py | 26 +- tripleoclient/v1/overcloud_cell.py | 15 +- tripleoclient/v1/overcloud_deploy.py | 515 +++++++++------ tripleoclient/v1/overcloud_external_update.py | 5 +- tripleoclient/v1/overcloud_external_upgrade.py | 5 +- tripleoclient/v1/overcloud_image.py | 60 +- tripleoclient/v1/overcloud_node.py | 97 +-- tripleoclient/v1/overcloud_restore.py | 147 +++++ tripleoclient/v1/overcloud_roles.py | 13 +- tripleoclient/v1/overcloud_update.py | 118 ++-- tripleoclient/v1/overcloud_upgrade.py | 32 +- tripleoclient/v1/tripleo_deploy.py | 46 +- tripleoclient/v1/tripleo_launch_heat.py | 24 +- tripleoclient/v1/tripleo_validator.py | 133 ++++ tripleoclient/v1/undercloud.py | 16 +- tripleoclient/v1/undercloud_config.py | 21 +- tripleoclient/v1/undercloud_minion.py | 162 ----- tripleoclient/v1/undercloud_preflight.py | 36 +- tripleoclient/v2/overcloud_ceph.py | 634 ++++++++++++++++++ tripleoclient/v2/overcloud_delete.py | 74 ++- tripleoclient/v2/overcloud_network.py | 39 ++ tripleoclient/v2/overcloud_node.py | 43 +- tripleoclient/v2/tripleo_container_image.py | 38 +- tripleoclient/workflows/baremetal.py | 52 +- tripleoclient/workflows/deployment.py | 146 ++-- tripleoclient/workflows/parameters.py | 42 +- tripleoclient/workflows/roles.py | 12 +- tripleoclient/workflows/scale.py | 230 ------- zuul.d/layout.yaml | 13 - 86 files changed, 4327 insertions(+), 2603 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 9c80b5a5..3616e4e8 100644 --- a/requirements.txt +++ b/requirements.txt @@ -19 +19 @@ ansible-runner>=1.4.5 # Apache 2.0 -validations-libs>=1.1.0 # Apache-2.0 +validations-libs>=1.2.0 # Apache-2.0

1 0

ec2-api 15.0.0.0rc2 (zed)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

Hello everyone, A new release candidate for ec2-api for the end of the Zed cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ec2-api/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Zed release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/zed release branch at: https://opendev.org/openstack/ec2-api/src/branch/stable/zed Release notes for ec2-api can be found at: https://docs.openstack.org/releasenotes/ec2-api/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ec2-api/+bugs and tag it *zed-rc-potential* to bring it to the ec2-api release crew's attention.

1 0

ironic-tempest-plugin 2.5.0 (zed)
by no-reply＠openstack.org 26 Sep '22

26 Sep '22

We eagerly announce the release of: ironic-tempest-plugin 2.5.0: Tempest plugin for ironic and ironic- inspector This release is part of the zed release series. The source is available from: https://opendev.org/openstack/ironic-tempest-plugin Download the package from: https://tarballs.openstack.org/ironic-tempest-plugin/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/ironic For more details, please see below. Changes in ironic-tempest-plugin 2.4.0..2.5.0 --------------------------------------------- 7856205 Add iDRAC Redfish configuration molds test 853164a Add iDRAC Redfish firmware update test 2e680f9 Add iDRAC Redfish sync boot mode test 42656a0 Add iDRAC RAID cleaning steps tests ce437b7 remove unicode from code a766d8e Swap maintenance fix to cleanup step 8d176bd Undo maintenace state on protected node tests b1c8a2b Add iDRAC Redfish virtual media boot deploy test 832deac Add more deploy tests for idrac, redfish, ipmi 09c7a85 Set minimal tempest version to 27.0.0 c652e31 Dettaching instance_uuid for standalone TC's 8530737 Add idrac OOB inspection test cases 7f6f5d7 CI: Removing ironic job queue 8bc9330 Add yoga tests, stop testing victoria 6bddaab Remove six 64ad557 Add iDRAC management cleaning steps tests d41c80e Add iDRAC BIOS cleaning steps tests Diffstat (except docs and test files) ------------------------------------- ironic_tempest_plugin/common/waiters.py | 5 +- ironic_tempest_plugin/config.py | 32 ++ ironic_tempest_plugin/exceptions.py | 4 + ironic_tempest_plugin/services/baremetal/base.py | 11 +- .../services/baremetal/v1/json/baremetal_client.py | 2 +- .../storage_inventory_schema.json | 101 +++++++ .../scenario/ironic_standalone/test_basic_ops.py | 218 ++++++++++++++ .../scenario/ironic_standalone/test_cleaning.py | 323 +++++++++++++++++++++ .../ironic_standalone/test_inspection_basic.py | 67 +++++ requirements.txt | 3 +- zuul.d/project.yaml | 31 +- zuul.d/stable-jobs.yaml | 31 ++ 18 files changed, 974 insertions(+), 49 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 54751e4..cde72ba 100644 --- a/requirements.txt +++ b/requirements.txt @@ -11,2 +11 @@ fixtures>=3.0.0 # Apache-2.0/BSD -six>=1.10.0 # MIT -tempest>=17.1.0 # Apache-2.0 +tempest>=27.0.0 # Apache-2.0

1 0

networking-generic-switch 7.0.0 (zed)
by no-reply＠openstack.org 23 Sep '22

23 Sep '22

We are pumped to announce the release of: networking-generic-switch 7.0.0: Generic Switch ML2 Neutron Driver This release is part of the zed release series. The source is available from: https://opendev.org/openstack/networking-generic-switch Download the package from: https://pypi.org/project/networking-generic-switch Please report issues through: https://storyboard.openstack.org/#!/project/openstack/networking- generic-switch For more details, please see below. Changes in networking-generic-switch 6.1.0..7.0.0 ------------------------------------------------- 62d9322 remove unicode from code 79fc104 Implements basic functionality for use with Pluribus switches. 2e57ea7 Add Nokia SRL release note 95fc589 Support Nokia SR Linux 54e6b51 Try fixing a non-deterministic test failure on the CI 29e7b59 Trim spaces in ngs_trunk_ports and ngs_physical_networks dc30633 dell: Fix VLAN creation on OS9 devices 981923a Declare l2 connectivity capability to tell Neutron we can handle L2-only ports 3c90da3 Drop lower-constraints.txt and its testing 0443259 The Python 3.6 and Python 3.7 Support has been dropped since zed aea6708 Support 802.3ad port groups on Cumulus devices 1ef6597 CI: Removing job queue 2e201a0 CI: use pre-existing ssh key on multinode jobs f469dc1 CI: Alternate logic for multinode key replacement 6a0f213 Trivial: Remove legacy devstack CI call c6c10a1 CI: Fix Multinode ssh key/hostname for unit tests 3f1a927 Add support for switches running SONiC operating system 9f7d951 Add Python3 zed unit tests 0b6a7d8 Update master for stable/yoga Diffstat (except docs and test files) ------------------------------------- devstack/plugin.sh | 17 ++- lower-constraints.txt | 89 ------------ networking_generic_switch/devices/__init__.py | 12 +- .../devices/netmiko_devices/__init__.py | 51 ++++++- .../devices/netmiko_devices/cumulus.py | 16 +++ .../devices/netmiko_devices/dell.py | 7 +- .../devices/netmiko_devices/nokia.py | 104 ++++++++++++++ .../devices/netmiko_devices/pluribus.py | 35 +++++ .../devices/netmiko_devices/sonic.py | 86 ++++++++++++ networking_generic_switch/devices/utils.py | 10 ++ networking_generic_switch/generic_switch_mech.py | 71 +++++++--- ...d-sonic-os-switch-support-73fcaf3acdc8c1d0.yaml | 6 + .../notes/cumulus-802.3ad-da9bffe131995f98.yaml | 4 + .../notes/nokia-srl-support-52ea2a445f4b24d4.yaml | 4 + releasenotes/source/conf.py | 16 +-- releasenotes/source/index.rst | 1 + releasenotes/source/yoga.rst | 6 + requirements.txt | 2 +- setup.cfg | 7 +- tox.ini | 6 - zuul.d/project.yaml | 4 +- 32 files changed, 965 insertions(+), 156 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 0b98540..a0371ae 100644 --- a/requirements.txt +++ b/requirements.txt @@ -5 +5 @@ stevedore>=1.20.0 # Apache-2.0 -netmiko>=2.4.1 # MIT +netmiko>=4.1.1 # MIT

1 0

manila-tempest-plugin 1.10.0 (zed)
by no-reply＠openstack.org 23 Sep '22

23 Sep '22

We are overjoyed to announce the release of: manila-tempest-plugin 1.10.0: Tempest plugin manila-tempest-plugin This release is part of the zed release series. The source is available from: https://opendev.org/openstack/manila-tempest-plugin Download the package from: https://tarballs.openstack.org/manila-tempest-plugin/ Please report issues through: https://bugs.launchpad.net/manila/+bugs For more details, please see below. Changes in manila-tempest-plugin 1.9.0..1.10.0 ---------------------------------------------- a90e325 Expect 404 for unauthorized share access 79cad92 [CI] Stop suppressing cleanup errors in CephFS jobs 4b26d79 Use ddt.named_data decorator to avoid random test names f67893c Use OVS with IPv6 data path testing jobs c89cb9d remove unicode prefix from code c81501c remove unicode from code 9ac47cb [CI] Drop stable/victoria job configuration Diffstat (except docs and test files) ------------------------------------- releasenotes/source/conf.py | 16 +++++----- requirements.txt | 2 +- zuul.d/manila-tempest-jobs.yaml | 34 +++++++++++++++++----- zuul.d/manila-tempest-stable-jobs.yaml | 10 +++---- 10 files changed, 83 insertions(+), 55 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 95ad247..108bbee 100644 --- a/requirements.txt +++ b/requirements.txt @@ -7 +7 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 -ddt>=1.0.1 # MIT +ddt>=1.6.0 # MIT

1 0