March 2022 - Release-announce - lists.openstack.org

cloudkitty-dashboard 14.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for cloudkitty-dashboard for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/cloudkitty-dashboard/src/branch/stable/yoga Release notes for cloudkitty-dashboard can be found at: https://docs.openstack.org/releasenotes/cloudkitty-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty-dashboard and tag it *yoga-rc-potential* to bring it to the cloudkitty-dashboard release crew's attention.

1 0

blazar 9.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for blazar for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/blazar/src/branch/stable/yoga Release notes for blazar can be found at: https://docs.openstack.org/releasenotes/blazar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *yoga-rc-potential* to bring it to the blazar release crew's attention.

1 0

blazar-dashboard 7.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for blazar-dashboard for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/blazar-dashboard/src/branch/stable/yoga Release notes for blazar-dashboard can be found at: https://docs.openstack.org/releasenotes/blazar-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *yoga-rc-potential* to bring it to the blazar-dashboard release crew's attention.

1 0

openstack-heat 18.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for openstack-heat for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/openstack-heat/src/branch/stable/yoga Release notes for openstack-heat can be found at: https://docs.openstack.org/releasenotes/heat/

1 0

zun 9.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for zun for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/zun/src/branch/stable/yoga Release notes for zun can be found at: https://docs.openstack.org/releasenotes/zun/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun/+bugs and tag it *yoga-rc-potential* to bring it to the zun release crew's attention.

1 0

heat-agents 4.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for heat-agents for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat-agents/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/heat-agents/src/branch/stable/yoga Release notes for heat-agents can be found at: https://docs.openstack.org/releasenotes/heat-agents/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/heat-agents/+bugs and tag it *yoga-rc-potential* to bring it to the heat-agents release crew's attention.

1 0

heat-dashboard 7.0.0.0rc1 (yoga)
by no-reply＠openstack.org 08 Mar '22

08 Mar '22

Hello everyone, A new release candidate for heat-dashboard for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/heat-dashboard/src/branch/stable/yoga Release notes for heat-dashboard can be found at: https://docs.openstack.org/releasenotes/heat-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/heat-dashboard and tag it *yoga-rc-potential* to bring it to the heat-dashboard release crew's attention.

1 0

os-brick 4.0.5 (victoria)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are ecstatic to announce the release of: os-brick 4.0.5: OpenStack Cinder brick library for managing local volume attaches This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/os-brick Download the package from: https://pypi.org/project/os-brick Please report issues through: https://bugs.launchpad.net/os-brick/+bugs For more details, please see below. 4.0.5 ^^^^^ Upgrade Notes ************* * Services using os-brick need to set the "lock_path" configuration option in their "[oslo_concurrency]" section since it doesn't have a valid default (related bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370)) Bug Fixes ********* * Bug #1944474 (https://bugs.launchpad.net/os-brick/+bug/1944474) Fixed missing retries to reinitiate iSCSI connections with high concurrency of connections and with multipath enabled. * Bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370) Fixed race conditions on iSCSI with shared targets and NVMe "connect_volume" and "disconnect_volume" calls. Changes in os-brick 4.0.4..4.0.5 -------------------------------- ffe0cbf linuxscsi: Only raise and log multipathd errors when required b03eca8 Use file locks in connectors 7c7650b multipath/iscsi: iSCSI connections are not reinitiated after reboot Diffstat (except docs and test files) ------------------------------------- os_brick/initiator/connectors/fibre_channel.py | 6 +-- os_brick/initiator/connectors/huawei.py | 4 +- os_brick/initiator/connectors/iscsi.py | 39 +++++++++++++------- os_brick/initiator/connectors/nvmeof.py | 6 +-- os_brick/initiator/connectors/scaleio.py | 4 +- os_brick/initiator/linuxscsi.py | 6 +-- os_brick/initiator/utils.py | 3 +- .../notes/bug-1944474-55c5ebb3a37801aa.yaml | 6 +++ .../notes/external-locks-9f015988ebdc37d6.yaml | 12 ++++++ 13 files changed, 142 insertions(+), 31 deletions(-)

1 0

cinder 17.3.0 (victoria)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are thrilled to announce the release of: cinder 17.3.0: OpenStack Block Storage This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/cinder Download the package from: https://tarballs.openstack.org/cinder/ Please report issues through: https://bugs.launchpad.net/cinder/+bugs For more details, please see below. 17.3.0 ^^^^^^ New Features ************ * HPE 3PAR Driver: Add support of iSCSI driver for Primera 4.2 or higher versions. Bug Fixes ********* * Bug #1935688 (https://bugs.launchpad.net/cinder/+bug/1935688) Cinder only supports uploading a volume of an encrypted volume type as an image to the Image service in "raw" format using a "bare" container type. Previously, "os-volume_upload_image" action requests to the Block Storage API specifying different format option values were accepted, but would result in a later failure. This condition is now checked at the API layer, and "os- volume_upload_image" action requests on a volume of an encrypted type that specify unsupported values for "disk_format" or "container_format" now result in a 400 (Bad Request) response. * RBD driver bug #1947518 (https://bugs.launchpad.net/cinder/+bug/1947518) Corrected a regression caused by the fix for Bug #1931004 (https://bugs.launchpad.net/cinder/+bug/1931004) that was attempting to access the glance images RBD pool with write privileges when creating a volume from an image. * PowerMax driver bug #1929429 (https://bugs.launchpad.net/cinder/+bug/1929429) Fixes child/parent storage group check so that a pattern match is not case sensitive. For example, myStorageGroup should equal MYSTORAGEGROUP and mystoragegroup. * Bug #1916980 (https://bugs.launchpad.net/cinder/+bug/1916980) Fixed stale volume notification information on volume detach. * Bug #1935011 (https://bugs.launchpad.net/cinder/+bug/1935011) Fixed missing detach.start notification when deleting an attachment in reserved state. * Bug #1937084 (https://bugs.launchpad.net/cinder/+bug/1937084) Fixed race condition between delete attachment and delete volume that can leave deleted volumes stuck as attached to instances. * Bug #1950474 (https://bugs.launchpad.net/cinder/+bug/1950474) Fixed policy authorization for transfer accept API. Previously, if an operator had overridden the default transfer accept policy to something project specific in policy.yaml file, it would break the transfer accept API which is fixed in this release. * Bug #1941068 (https://bugs.launchpad.net/cinder/+bug/1941068) Fixed type of the "host" configuration option. It was limited to valid FQDN values when we document that it isn't. This may result in the "cinder-manage db sync" command failing. * Bug #1935057 (https://bugs.launchpad.net/cinder/+bug/1935057) Fixed sometimes on a detach volume may end in available and detached yet have an attachment in error_detaching. Changes in cinder 17.2.0..17.3.0 -------------------------------- fac676112 Reject bad img formats for uploaded encrypted vols 4115ca21f Volume transfers: Remove duplicate policy check ad392294a [stable-only] Specify openstacksdk stable branch 399da0782 Fix: Race between attachment and volume deletion bc6585577 Expose volume_attachments in Volume OVO 3339bfb83 Fix volume OVO create method 6be7ee3b6 Remove unnecessary save call 2aa799bbf Fix old attach method 362b7e14f Delete attachment on remove_export failure c9d3cc966 Fix detach notification 239030522 [RBD] Fix snapshot backup name a80b967ab 3PAR: Allow iSCSI driver to be enabled for Primera 4.2 onwards. 81f462778 Log connection info returned from driver 5379af08f RBD: Open RBD images read-only where possible bda74498d Tests: Fix compatibility with ddt 1.2.x 5dcfe0224 PowerMax Driver - Allow for case mismatch in SGs 63fdf88d9 Native multibackend-matrix Zuul v3 job 8e48b4ded Change 'host' option from HostAddressOpt to StrOpt Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 40 ++++++- api-ref/source/v3/parameters.yaml | 14 +++ api-ref/source/v3/volumes-v3-volumes-actions.inc | 4 +- cinder/api/contrib/volume_actions.py | 8 ++ cinder/backup/drivers/ceph.py | 5 +- cinder/common/config.py | 12 +-- cinder/db/sqlalchemy/api.py | 116 ++++++++++++--------- cinder/db/sqlalchemy/models.py | 10 ++ cinder/objects/volume.py | 16 ++- .../unit/attachments/test_attachments_manager.py | 51 ++++++++- .../dell_emc/powermax/test_powermax_rest.py | 16 +++ .../unit/volume/flows/test_create_volume_flow.py | 6 +- cinder/volume/api.py | 81 +++++--------- cinder/volume/drivers/dell_emc/powermax/fc.py | 3 +- cinder/volume/drivers/dell_emc/powermax/iscsi.py | 3 +- cinder/volume/drivers/dell_emc/powermax/rest.py | 3 +- cinder/volume/drivers/hpe/hpe_3par_iscsi.py | 17 ++- cinder/volume/drivers/rbd.py | 15 ++- cinder/volume/manager.py | 22 ++-- .../block-storage/drivers/hpe-3par-driver.rst | 6 +- playbooks/cinder-multibackend-matrix.yaml | 35 +++++++ .../notes/bug-193688-bb045badcd5aecad.yaml | 12 +++ ...1947518-rbd-open-readonly-ba523c4b0ddbba76.yaml | 9 ++ .../notes/bug1929429-e749f5e5a242a599.yaml | 8 ++ .../detach-notification-31ae15dafdef36c1.yaml | 9 ++ .../notes/detach-race-delete-012820ad9c8dbe16.yaml | 6 ++ ...ix-transfer-accept-policy-7594806372b14284.yaml | 8 ++ ...pe-3par-primera-add-iscsi-5af339643dfa0928.yaml | 5 + ...ct-host-config-option-347e60f957458d54_new.yaml | 7 ++ ...failure_leaves_attachment-24e0c648269b0177.yaml | 6 ++ .../defaults/main.yaml | 6 ++ .../defaults/main.yaml | 3 + .../save-cinder-migration-results/tasks/main.yaml | 14 +++ .../templates/migration_results_reporter.py.j2 | 10 ++ tools/hooks/README | 4 - tools/hooks/run_multi_backend_matrix.sh | 94 ----------------- tools/hooks/utils.sh | 10 -- 46 files changed, 583 insertions(+), 293 deletions(-)

1 0

validations-common 1.6.0
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We jubilantly announce the release of: validations-common 1.6.0: A common Ansible libraries and plugins for the validations framework The source is available from: https://opendev.org/openstack/validations-common Download the package from: https://tarballs.openstack.org/validations-common/ For more details, please see below. Changes in validations-common 1.5.0..1.6.0 ------------------------------------------ 88d2345 feat(removal): tox-ansible support 3cfc3bf fix(molecule): Add ability to run molecule on Fedora 05cf32a fix(ci): Install python3 package first ae303b9 Molecule test restoration 558200c Bumping the ansible-lint version to 5.3.2 in order to resolve CI failure ec6bfcb add pre-update and pre-upgrade groups to ntp playbook Diffstat (except docs and test files) ------------------------------------- .config/molecule/Dockerfile | 12 ++++++---- .config/molecule/config.yml | 18 +++++++------- .pre-commit-config.yaml | 2 +- .zuul.yaml | 6 ++--- LICENSE | 1 - README.rst | 8 +++++++ ansible-collections-requirements.yml | 1 + bindep.txt | 28 +++++++++------------- playbooks/molecule/pre.yml | 7 ++++++ scripts/bindep-install | 2 +- scripts/run-local-test | 7 ++++-- test-requirements.txt | 1 + tox.ini | 25 +++++++++---------- validations_common/playbooks/ntp.yaml | 2 ++ .../service_status/molecule/default/molecule.yml | 8 +++---- .../service_status/molecule/docker/molecule.yml | 8 +++---- .../service_status/molecule/systemd/molecule.yml | 8 +++---- 18 files changed, 80 insertions(+), 66 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 4826c4d..53b91e5 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -4,0 +5 @@ +ansible-core<2.12 # GPLv3+

1 0

keystoneauth1 4.5.0 (yoga)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are satisfied to announce the release of: keystoneauth1 4.5.0: Authentication Library for OpenStack Identity This release is part of the yoga release series. The source is available from: https://opendev.org/openstack/keystoneauth1 Download the package from: https://pypi.org/project/keystoneauth1 For more details, please see below. Changes in keystoneauth1 4.4.0..4.5.0 ------------------------------------- 49db50b Fix bindep for current rpm based distributions a1e209c setup.cfg: Replace dashes by underscores 7bbce97 Fix docs build Diffstat (except docs and test files) ------------------------------------- bindep.txt | 2 +- setup.cfg | 8 ++++---- tox.ini | 6 ++++++ 3 files changed, 11 insertions(+), 5 deletions(-)

1 0

os-brick 4.3.3 (wallaby)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are thrilled to announce the release of: os-brick 4.3.3: OpenStack Cinder brick library for managing local volume attaches This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/os-brick Download the package from: https://pypi.org/project/os-brick Please report issues through: https://bugs.launchpad.net/os-brick/+bugs For more details, please see below. 4.3.3 ^^^^^ Upgrade Notes ************* * Services using os-brick need to set the "lock_path" configuration option in their "[oslo_concurrency]" section since it doesn't have a valid default (related bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370)) Bug Fixes ********* * Bug #1944474 (https://bugs.launchpad.net/os-brick/+bug/1944474) Fixed missing retries to reinitiate iSCSI connections with high concurrency of connections and with multipath enabled. * Bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370) Fixed race conditions on iSCSI with shared targets and NVMe "connect_volume" and "disconnect_volume" calls. Changes in os-brick 4.3.2..4.3.3 -------------------------------- d09dc9e linuxscsi: Only raise and log multipathd errors when required ecaf7f8 Use file locks in connectors 779d1e4 multipath/iscsi: iSCSI connections are not reinitiated after reboot Diffstat (except docs and test files) ------------------------------------- os_brick/initiator/connectors/fibre_channel.py | 6 +-- os_brick/initiator/connectors/huawei.py | 4 +- os_brick/initiator/connectors/iscsi.py | 39 +++++++++++++------- os_brick/initiator/connectors/nvmeof.py | 6 +-- os_brick/initiator/connectors/scaleio.py | 4 +- os_brick/initiator/linuxscsi.py | 6 +-- os_brick/initiator/utils.py | 3 +- .../notes/bug-1944474-55c5ebb3a37801aa.yaml | 6 +++ .../notes/external-locks-9f015988ebdc37d6.yaml | 12 ++++++ 13 files changed, 142 insertions(+), 31 deletions(-)

1 0

cinder 18.2.0 (wallaby)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are jazzed to announce the release of: cinder 18.2.0: OpenStack Block Storage This release is part of the wallaby stable release series. The source is available from: https://opendev.org/openstack/cinder Download the package from: https://tarballs.openstack.org/cinder/ Please report issues through: https://bugs.launchpad.net/cinder/+bugs For more details, please see below. 18.2.0 ^^^^^^ Upgrade Notes ************* * **RBD driver: Enable Ceph V2 Clone API and Ceph Trash auto purge** In light of the fix for RBD driver bug #1941815 (https://bugs.launchpad.net/cinder/+bug/1941815) we want to bring the following information to your attention. Using the v2 clone format for cloned volumes allows volumes with dependent images to be moved to the trash - where they remain until purged - and allow the RBD driver to postpone the deletion until the volume has no dependent images. Configuring the trash purge is recommended to avoid wasting space with these trashed volumes. Since the Ceph Octopus release, the trash can be configured to automatically purge on a defined schedule. See the "rbd trash purge schedule" commands in the rbd manpage (https://docs.ceph.com/en/octopus/man/8/rbd/) Bug Fixes ********* * Bug #1935688 (https://bugs.launchpad.net/cinder/+bug/1935688) Cinder only supports uploading a volume of an encrypted volume type as an image to the Image service in "raw" format using a "bare" container type. Previously, "os-volume_upload_image" action requests to the Block Storage API specifying different format option values were accepted, but would result in a later failure. This condition is now checked at the API layer, and "os- volume_upload_image" action requests on a volume of an encrypted type that specify unsupported values for "disk_format" or "container_format" now result in a 400 (Bad Request) response. * RBD driver bug #1941815 (https://bugs.launchpad.net/cinder/+bug/1941815) Fixed deleting volumes with snapshots/volumes in the ceph trash space. * RBD driver bug #1947518 (https://bugs.launchpad.net/cinder/+bug/1947518) Corrected a regression caused by the fix for Bug #1931004 (https://bugs.launchpad.net/cinder/+bug/1931004) that was attempting to access the glance images RBD pool with write privileges when creating a volume from an image. * Bug #1947134 (https://bugs.launchpad.net/cinder/+bug/1947134) Fixed the initialization of GPFS NFS driver when gpfs_images_share_mode is set to copy_on_write by correcting _same_filesystem functionality. * Bug #1947123 (https://bugs.launchpad.net/cinder/+bug/1947123) Fixed the volume creation issue in GPFS NFS driver when gpfs_images_share_mode is set to copy_on_write. * PowerMax driver bug #1929429 (https://bugs.launchpad.net/cinder/+bug/1929429) Fixes child/parent storage group check so that a pattern match is not case sensitive. For example, myStorageGroup should equal MYSTORAGEGROUP and mystoragegroup. * Pure Storage driver Bug #1945824 (https://bugs.launchpad.net/cinder/+bug/1945824) Fixed missing DB values when creating new consistency group from CG snapshot. * Bug #1916980 (https://bugs.launchpad.net/cinder/+bug/1916980) Fixed stale volume notification information on volume detach. * Bug #1935011 (https://bugs.launchpad.net/cinder/+bug/1935011) Fixed missing detach.start notification when deleting an attachment in reserved state. * Bug #1937084 (https://bugs.launchpad.net/cinder/+bug/1937084) Fixed race condition between delete attachment and delete volume that can leave deleted volumes stuck as attached to instances. * Bug #1924643 (https://bugs.launchpad.net/cinder/+bug/1924643) Fixed the NetApp cinder driver sub-clone operation that might be used by extend operation in case the extended size is greater than the max LUN geometry. * Bug #1950474 (https://bugs.launchpad.net/cinder/+bug/1950474) Fixed policy authorization for transfer accept API. Previously, if an operator had overridden the default transfer accept policy to something project specific in policy.yaml file, it would break the transfer accept API which is fixed in this release. * Bug #1941068 (https://bugs.launchpad.net/cinder/+bug/1941068) Fixed type of the "host" configuration option. It was limited to valid FQDN values when we document that it isn't. This may result in the "cinder-manage db sync" command failing. * Bug #1935057 (https://bugs.launchpad.net/cinder/+bug/1935057) Fixed sometimes on a detach volume may end in available and detached yet have an attachment in error_detaching. * Bug #1886543 (https://bugs.launchpad.net/cinder/+bug/1886543) On retypes requiring a migration, try to use the driver assisted mechanism when moving from one backend to another when we know it's safe from the volume type perspective. Changes in cinder 18.1.0..18.2.0 -------------------------------- f9d85e607 [stable-only] Specify openstacksdk stable branch b86da5d40 Volume transfers: Remove duplicate policy check 7210c914c Fix: Race between attachment and volume deletion a5b67fd95 Expose volume_attachments in Volume OVO be7b00129 Delete attachment on remove_export failure ed06fc745 Fix detach notification 12f7376fe Reject bad img formats for uploaded encrypted vols fffe9b57b NetApp ONTAP: Fix sub-clone zapi call afc90f891 Driver assisted migration on retype when it's safe 30578a728 [Pure Storage] Add missing DB values when performing create CG from CG snap 0e3f03529 Fixed copy-on-write mode in GPFS NFS driver 50f4dd044 RBD: Call trash operation when plain deletion fails f2fe6cc11 RBD: Open RBD images read-only where possible 74c5a3332 Log connection info returned from driver 326fa62d7 Native multibackend-matrix Zuul v3 job 80ef8c104 PowerMax Driver - Allow for case mismatch in SGs 498608a84 Change 'host' option from HostAddressOpt to StrOpt Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 40 +++++- api-ref/source/v3/parameters.yaml | 14 +++ api-ref/source/v3/volumes-v3-volumes-actions.inc | 4 +- cinder/api/contrib/volume_actions.py | 8 ++ cinder/common/config.py | 12 +- cinder/db/sqlalchemy/api.py | 115 ++++++++++-------- cinder/db/sqlalchemy/models.py | 10 ++ cinder/objects/volume.py | 6 +- .../unit/attachments/test_attachments_manager.py | 51 +++++++- .../dell_emc/powermax/test_powermax_rest.py | 16 +++ .../netapp/dataontap/client/test_client_cmode.py | 36 ++++++ .../unit/volume/flows/test_create_volume_flow.py | 9 +- cinder/volume/api.py | 67 +++------- cinder/volume/drivers/dell_emc/powermax/fc.py | 3 +- cinder/volume/drivers/dell_emc/powermax/iscsi.py | 3 +- cinder/volume/drivers/dell_emc/powermax/rest.py | 3 +- cinder/volume/drivers/ibm/gpfs.py | 30 +++-- .../netapp/dataontap/client/client_cmode.py | 7 +- cinder/volume/drivers/pure.py | 19 ++- cinder/volume/drivers/rbd.py | 37 ++++-- cinder/volume/manager.py | 53 +++++--- playbooks/cinder-multibackend-matrix.yaml | 35 ++++++ .../notes/bug-193688-bb045badcd5aecad.yaml | 12 ++ ...when-plain-deletion-fails-50cef4a8a8010ba9.yaml | 24 ++++ ...1947518-rbd-open-readonly-ba523c4b0ddbba76.yaml | 9 ++ releasenotes/notes/bug-gpfs-fix-nfs-cow.yaml | 10 ++ .../notes/bug1929429-e749f5e5a242a599.yaml | 8 ++ .../notes/bug_1945824-7f8f238e274ddebd.yaml | 5 + .../detach-notification-31ae15dafdef36c1.yaml | 9 ++ .../notes/detach-race-delete-012820ad9c8dbe16.yaml | 6 + .../fix-sub-clone-operation-f42a84ab17930f24.yaml | 7 ++ ...ix-transfer-accept-policy-7594806372b14284.yaml | 8 ++ ...ct-host-config-option-347e60f957458d54_new.yaml | 7 ++ ...failure_leaves_attachment-24e0c648269b0177.yaml | 6 + ...retype-assisted-migration-6cdc7f9b21beb859.yaml | 7 ++ .../defaults/main.yaml | 6 + .../defaults/main.yaml | 3 + .../save-cinder-migration-results/tasks/main.yaml | 14 +++ .../templates/migration_results_reporter.py.j2 | 10 ++ tools/hooks/README | 4 - tools/hooks/run_multi_backend_matrix.sh | 94 -------------- tools/hooks/utils.sh | 10 -- 53 files changed, 900 insertions(+), 316 deletions(-)

1 0

sushy 4.1.1 (yoga)
by no-reply＠openstack.org 07 Mar '22

07 Mar '22

We are pumped to announce the release of: sushy 4.1.1: Sushy is a small Python library to communicate with Redfish based systems This release is part of the yoga release series. The source is available from: https://opendev.org/openstack/sushy Download the package from: https://tarballs.openstack.org/sushy/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/sushy For more details, please see below. 4.1.1 ^^^^^ Bug Fixes * Resolved virtualmedia attach failures caused by the lack of TransferProtocolType parameter in the request payload which is required by certain BMCs (e.g. on Nokia servers). This is done by adding capability to retry virtualmedia InsertMedia with the updated payload in such cases. * Fixes incompatibility with BMCs that require use of a specific SettingsObject URI specified in @Redfish.Settings resource in order to set BootSourceOverride or similar attributes. For example, this is required on Nokia servers. Changes in sushy 4.1.0..4.1.1 ----------------------------- ecf1bcc Re-trying InsertMedia call with TransferProtocolType if required d191fc5 Add missing __init__.py ce52b03 Follow up to Attempt using Redfish settings resource to get URI 1ddf9d7 Attempt using Redfish settings resource to get URI Diffstat (except docs and test files) ------------------------------------- ...transferprototype-missing-9cae57f3ecf470a9.yaml | 7 +++++ ...ttingsobject-if-supported-12a332f9905d64ce.yaml | 7 +++++ sushy/resources/manager/virtual_media.py | 26 +++++++++++++++- sushy/resources/system/network/__init__.py | 0 sushy/resources/system/system.py | 25 ++++++++++++--- .../transfer_proto_required_error.json | 22 +++++++++++++ .../unit/resources/manager/test_virtual_media.py | 16 ++++++++++ 9 files changed, 141 insertions(+), 6 deletions(-)

1 0

os-brick 5.0.2 (xena)
by no-reply＠openstack.org 04 Mar '22

04 Mar '22

We are psyched to announce the release of: os-brick 5.0.2: OpenStack Cinder brick library for managing local volume attaches This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/os-brick Download the package from: https://pypi.org/project/os-brick Please report issues through: https://bugs.launchpad.net/os-brick/+bugs For more details, please see below. 5.0.2 ^^^^^ Upgrade Notes ************* * Services using os-brick need to set the "lock_path" configuration option in their "[oslo_concurrency]" section since it doesn't have a valid default (related bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370)) Bug Fixes ********* * Bug #1944474 (https://bugs.launchpad.net/os-brick/+bug/1944474) Fixed missing retries to reinitiate iSCSI connections with high concurrency of connections and with multipath enabled. * Bug #1947370 (https://bugs.launchpad.net/cinder/+bug/1947370) Fixed race conditions on iSCSI with shared targets and NVMe "connect_volume" and "disconnect_volume" calls. Changes in os-brick 5.0.1..5.0.2 -------------------------------- 19a4820 Use file locks in connectors 4d11648 multipath/iscsi: iSCSI connections are not reinitiated after reboot Diffstat (except docs and test files) ------------------------------------- os_brick/initiator/connectors/fibre_channel.py | 6 ++-- os_brick/initiator/connectors/huawei.py | 4 +-- os_brick/initiator/connectors/iscsi.py | 39 ++++++++++++++-------- os_brick/initiator/connectors/nvmeof.py | 6 ++-- os_brick/initiator/connectors/scaleio.py | 4 +-- os_brick/initiator/utils.py | 3 +- .../notes/bug-1944474-55c5ebb3a37801aa.yaml | 6 ++++ .../notes/external-locks-9f015988ebdc37d6.yaml | 12 +++++++ 11 files changed, 98 insertions(+), 26 deletions(-)

1 0

cinder 19.1.0 (xena)
by no-reply＠openstack.org 04 Mar '22

04 Mar '22

We are pumped to announce the release of: cinder 19.1.0: OpenStack Block Storage This release is part of the xena stable release series. The source is available from: https://opendev.org/openstack/cinder Download the package from: https://tarballs.openstack.org/cinder/ Please report issues through: https://bugs.launchpad.net/cinder/+bugs For more details, please see below. 19.1.0 ^^^^^^ Bug Fixes * Bug #1935688 (https://bugs.launchpad.net/cinder/+bug/1935688) Cinder only supports uploading a volume of an encrypted volume type as an image to the Image service in "raw" format using a "bare" container type. Previously, "os-volume_upload_image" action requests to the Block Storage API specifying different format option values were accepted, but would result in a later failure. This condition is now checked at the API layer, and "os- volume_upload_image" action requests on a volume of an encrypted type that specify unsupported values for "disk_format" or "container_format" now result in a 400 (Bad Request) response. * RBD driver bug #1947518 (https://bugs.launchpad.net/cinder/+bug/1947518) Corrected a regression caused by the fix for Bug #1931004 (https://bugs.launchpad.net/cinder/+bug/1931004) that was attempting to access the glance images RBD pool with write privileges when creating a volume from an image. * Bug #1947134 (https://bugs.launchpad.net/cinder/+bug/1947134) Fixed the initialization of GPFS NFS driver when gpfs_images_share_mode is set to copy_on_write by correcting _same_filesystem functionality. * Bug #1947123 (https://bugs.launchpad.net/cinder/+bug/1947123) Fixed the volume creation issue in GPFS NFS driver when gpfs_images_share_mode is set to copy_on_write. * Pure Storage driver Bug #1945824 (https://bugs.launchpad.net/cinder/+bug/1945824) Fixed missing DB values when creating new consistency group from CG snapshot. * Bug #1916980 (https://bugs.launchpad.net/cinder/+bug/1916980) Fixed stale volume notification information on volume detach. * Bug #1935011 (https://bugs.launchpad.net/cinder/+bug/1935011) Fixed missing detach.start notification when deleting an attachment in reserved state. * Bug #1937084 (https://bugs.launchpad.net/cinder/+bug/1937084) Fixed race condition between delete attachment and delete volume that can leave deleted volumes stuck as attached to instances. * Bug #1924643 (https://bugs.launchpad.net/cinder/+bug/1924643) Fixed the NetApp cinder driver sub-clone operation that might be used by extend operation in case the extended size is greater than the max LUN geometry. * Bug #1950474 (https://bugs.launchpad.net/cinder/+bug/1950474) Fixed policy authorization for transfer accept API. Previously, setting "enforce_new_defaults=True" in oslo_policy section would break the transfer accept API which is fixed in this release. * PowerMax driver bug #1938572 (https://bugs.launchpad.net/cinder/+bug/1938572) : Legacy PowerMax OS fix to convert an int to a string if the generation of snapVX is returned as an int from REST so that a 0 does not equate to False in python. * Pure Storage Driver: Add internal check to allow for FlashArray with joint FC and NVMe-FC support * Bug #1935057 (https://bugs.launchpad.net/cinder/+bug/1935057) Fixed sometimes on a detach volume may end in available and detached yet have an attachment in error_detaching. Changes in cinder 19.0.0..19.1.0 -------------------------------- 9a4f3459d Doc: Typos in Spectrum Virtulize family user guide 8cb212966 Doc: IBM flashsystem driver update b66dbb151 [stable-only] Specify openstacksdk stable branch ed0be0c8f Fix: Race between attachment and volume deletion e85c22cef Expose volume_attachments in Volume OVO 1328c68a8 Delete attachment on remove_export failure c0197c6f1 Fix detach notification 46415541a Volume transfers: Remove duplicate policy check 78682022d Reject bad img formats for uploaded encrypted vols 344f3e8b0 NetApp ONTAP: Fix sub-clone zapi call 93363e3c4 [stable-xena-only] update xena personas doc 5bebe93ef Dell PowerVault: Fix "cinder manageable-list" b15107b36 Seagate driver: fix get_volume_size() 6c64d92a7 Fixed copy-on-write mode in GPFS NFS driver d03012825 [Pure Storage] Add check for NVMe-FC capable array 5b169aeea RBD: Open RBD images read-only where possible fe1e6be52 PowerMax Driver - Fix for legacy PowerMax OS around generations 3ba9b392a [Pure Storage] Add missing DB values when performing create CG from CG snap c0892af62 Fix typo in message policy deprecations febc0a003 PowerMax Docs - Xena release notes 5fcf5bd67 PowerMax Driver - Fix for GVG snapshot delete c5ad93487 PowerMax Driver - Port load balancing fix de55fab48 Dell PowerVault driver: Fix documentation typos Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 6 + api-ref/source/v3/parameters.yaml | 14 + api-ref/source/v3/volumes-v3-volumes-actions.inc | 4 +- cinder/api/contrib/volume_actions.py | 8 + cinder/db/sqlalchemy/api.py | 115 +++--- cinder/db/sqlalchemy/models.py | 10 + cinder/objects/volume.py | 6 +- cinder/policies/messages.py | 4 +- .../unit/attachments/test_attachments_manager.py | 51 ++- .../drivers/dell_emc/powermax/powermax_data.py | 8 +- .../dell_emc/powermax/test_powermax_common.py | 2 +- .../drivers/dell_emc/powermax/test_powermax_fc.py | 3 +- .../dell_emc/powermax/test_powermax_provision.py | 18 + .../dell_emc/powermax/test_powermax_rest.py | 24 +- .../netapp/dataontap/client/test_client_cmode.py | 36 ++ .../unit/volume/flows/test_create_volume_flow.py | 9 +- cinder/volume/api.py | 68 +--- cinder/volume/drivers/dell_emc/powermax/fc.py | 2 +- .../volume/drivers/dell_emc/powermax/provision.py | 3 +- cinder/volume/drivers/dell_emc/powermax/rest.py | 11 +- cinder/volume/drivers/dell_emc/powermax/utils.py | 9 + cinder/volume/drivers/ibm/gpfs.py | 30 +- .../netapp/dataontap/client/client_cmode.py | 7 +- cinder/volume/drivers/pure.py | 31 +- cinder/volume/drivers/rbd.py | 15 +- cinder/volume/drivers/stx/client.py | 61 ++- cinder/volume/drivers/stx/common.py | 92 +++++ cinder/volume/drivers/stx/fc.py | 22 ++ cinder/volume/drivers/stx/iscsi.py | 22 ++ cinder/volume/manager.py | 18 +- .../drivers/dell-emc-powermax-driver.rst | 86 ++-- .../drivers/dell-emc-powervault-me.rst | 6 +- .../drivers/ibm-flashsystem-volume-driver.rst | 11 +- .../drivers/ibm-storwize-svc-driver.rst | 96 ++--- .../block-storage/policy-personas.rst | 435 ++------------------- .../bug-1922255-dell-powervault-manage-volumes.rst | 6 + .../notes/bug-193688-bb045badcd5aecad.yaml | 12 + ...1947518-rbd-open-readonly-ba523c4b0ddbba76.yaml | 9 + releasenotes/notes/bug-gpfs-fix-nfs-cow.yaml | 10 + .../notes/bug_1945824-7f8f238e274ddebd.yaml | 5 + .../detach-notification-31ae15dafdef36c1.yaml | 9 + .../notes/detach-race-delete-012820ad9c8dbe16.yaml | 6 + .../notes/fix-size-reporting-seagate-driver.rst | 5 + .../fix-sub-clone-operation-f42a84ab17930f24.yaml | 7 + ...ix-transfer-accept-policy-7594806372b14284.yaml | 7 + ...max_legacy_generation_fix-09e437f955cd9d70.yaml | 8 + .../pure-check-nvmefc-ports-cf2aec3952d8192f.yaml | 5 + ...failure_leaves_attachment-24e0c648269b0177.yaml | 6 + 58 files changed, 1076 insertions(+), 707 deletions(-)

1 0

openstack-cyborg 8.0.0.0rc1 (yoga)
by no-reply＠openstack.org 04 Mar '22

04 Mar '22

Hello everyone, A new release candidate for openstack-cyborg for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cyborg/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/openstack-cyborg/src/branch/stable/yoga Release notes for openstack-cyborg can be found at: https://docs.openstack.org/releasenotes/cyborg/

1 0

glance 24.0.0.0rc1 (yoga)
by no-reply＠openstack.org 03 Mar '22

03 Mar '22

Hello everyone, A new release candidate for glance for the end of the Yoga cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/glance/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Yoga release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/yoga release branch at: https://opendev.org/openstack/glance/src/branch/stable/yoga Release notes for glance can be found at: https://docs.openstack.org/releasenotes/glance/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/glance/+bugs and tag it *yoga-rc-potential* to bring it to the glance release crew's attention.

1 0

kuryr-lib 2.5.0 (yoga)
by no-reply＠openstack.org 03 Mar '22

03 Mar '22

We are thrilled to announce the release of: kuryr-lib 2.5.0: Kuryr shared config and utilities This release is part of the yoga release series. The source is available from: https://opendev.org/openstack/kuryr-lib Download the package from: https://tarballs.openstack.org/kuryr/ For more details, please see below. Changes in kuryr-lib 2.4.0..2.5.0 --------------------------------- 37f9750 Changed minversion in tox to 3.18.0 24b0b1f Add Python3 yoga unit tests 66d31e7 Fix unit tests 193590c Update master for stable/xena Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 2 +- releasenotes/source/index.rst | 1 + releasenotes/source/xena.rst | 6 ++++++ tox.ini | 4 ++-- 8 files changed, 25 insertions(+), 44 deletions(-)

1 0

patrole 0.14.0 (yoga)
by no-reply＠openstack.org 03 Mar '22

03 Mar '22

We are chuffed to announce the release of: patrole 0.14.0: Patrole is a tool for verifying that Role-Based Access Control is being enforced across OpenStack deployments. This release is part of the yoga release series. The source is available from: https://opendev.org/openstack/patrole Download the package from: https://tarballs.openstack.org/patrole/ Please report issues through: https://bugs.launchpad.net/patrole/+bugs For more details, please see below. 0.14.0 ^^^^^^ Prelude ******* This release is to tag the Patrole for OpenStack Yoga release. This release marks the start of Yoga release support in Patrole. After this release, Patrole will support below OpenStack Releases: * Yoga * Xena * Wallaby * Victoria * Ussuri Current development of Patrole is for OpenStack Zed development cycle. Every Patrole commit is also tested against master during the Zed cycle. However, this does not necessarily mean that using Patrole as of this tag will work against a Yoga (or future release) cloud. To be on safe side, use this tag to test the OpenStack Yoga release. New Features ************ * Added new feature flag called "changed_cinder_policies_xena" under the configuration group "[policy-feature-enabled]" for testing Cinder tests withe old and new policies. Changes in patrole 0.13.0..0.14.0 --------------------------------- 7ce2d14 Add releasenote to tag the Patrole for Yoga release fa0ee13 Switch testing to Yoga testing runtime 7304b7c Add stable/wallaby job on master gate c341f42 Move to Xena testing runtime template 57ffb34 Remove stable/train job 588c33d [Fix gate]: Cinder policy change handling in tests f304d7a Add release notes page for version 0.13.0 e3a7ce2 Use py3 as the default runtime for tox Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 20 ++++++--------- devstack/plugin.sh | 19 +++++++++++++- patrole_tempest_plugin/config.py | 7 +++++- .../api/volume/test_volume_types_access_rbac.py | 10 +++++++- ...olicies-xena-feature-flag-4b799db683e2840f.yaml | 6 +++++ .../patrole-yoga-release-1eacc82c6c1c668c.yaml | 18 ++++++++++++++ releasenotes/source/index.rst | 1 + releasenotes/source/v0.13.0.rst | 6 +++++ tox.ini | 2 +- 14 files changed, 151 insertions(+), 34 deletions(-)

1 0

cyborg-tempest-plugin 1.4.0 (yoga)
by no-reply＠openstack.org 03 Mar '22

03 Mar '22

We are jazzed to announce the release of: cyborg-tempest-plugin 1.4.0: OpenStack Acceleration Tempest Plugin This release is part of the yoga release series. The source is available from: https://opendev.org/openstack/cyborg-tempest-plugin Download the package from: https://tarballs.openstack.org/cyborg-tempest-plugin/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/cyborg For more details, please see below. Changes in cyborg-tempest-plugin 1.3.0..1.4.0 --------------------------------------------- 2c62077 Add stable/xena jobs on master gate e3d295a create device profile name is null 8232166 add cyborg device negative test 7a31141 modify testcase desc c6c294f Change the core team url 5ba3ba9 Fix features url c31c673 Updating python testing classifier as per Yoga testing runtime f92df48 Use py3 as the default runtime for tox Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 6 ++++ setup.cfg | 1 + tox.ini | 2 +- 6 files changed, 68 insertions(+), 6 deletions(-)

1 0