September 2020 - Release-announce

sushy 3.4.1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

We are overjoyed to announce the release of: sushy 3.4.1: Sushy is a small Python library to communicate with Redfish based systems This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/sushy Download the package from: https://tarballs.openstack.org/sushy/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/sushy For more details, please see below. 3.4.1 ^^^^^ Bug Fixes * Makes message parsing more resilient by handling the case where the message ID only contains a message key and no registry name. In this case, fall back to the "Messages" message registry file and then to the "BaseMessages" message registry file. If the message ID cannot be found, then set the message to "unknown". When parsing messages, if not enough arguments were supplied, then fill in the remaining arguments with "unknown". Changes in sushy 3.4.0..3.4.1 ----------------------------- bb704a7 Trivial: add missing __init__.py to sushy/resources/taskservice aab6812 Make message parsing more resilient 7ec9021 Fix l-c job 3849988 Update TOX_CONSTRAINTS_FILE for stable/victoria 0f5a323 Update .gitreview for stable/victoria Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + lower-constraints.txt | 4 +- ...essage-parsing-resilience-534da532515a15da.yaml | 10 ++ sushy/main.py | 17 ++- sushy/resources/registry/message_registry.py | 42 ++++++- sushy/resources/taskservice/__init__.py | 0 .../resources/registry/test_message_registry.py | 127 +++++++++++++++++++++ tox.ini | 2 +- 9 files changed, 196 insertions(+), 15 deletions(-)

1 0

trove-dashboard 15.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for trove-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/trove-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/trove-dashboard/src/branch/stable/victoria Release notes for trove-dashboard can be found at: https://docs.openstack.org/releasenotes/trove-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/trove-dashboard/+bugs and tag it *victoria-rc-potential* to bring it to the trove-dashboard release crew's attention.

1 0

ovn-octavia-provider 0.3.0 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

We are stoked to announce the release of: ovn-octavia-provider 0.3.0: OpenStack Octavia integration with OVN This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/ovn-octavia-provider Download the package from: https://tarballs.openstack.org/ovn-octavia-provider/ Please report issues through: https://bugs.launchpad.net/neutron/+bugs For more details, please see below. Changes in ovn-octavia-provider 0.2.0..0.3.0 -------------------------------------------- 898d8f1 test_integration.py: remove neutron dependency e5699cf Add integration tests with port forwarding 44971ee Switch to TOX_CONSTRAINTS_FILE bfd9804 Fix broken gate 2da9f3d Omit tests directory while couting the coverage report c287fda Set the CONF.load_balancer.enabled_provider_drivers tempest conf 57dbca6 Fix member_batch_update function to follow api v2 65c25a4 Add installation of octavia-tempest-plugin to sample local.conf 3445f5f Update ROUND_ROBIN to SOURCE_IP_PORT in docs 773daf5 Fix pep8 and functional jobs 6ed2660 Add a hacking check for importing mock library Diffstat (except docs and test files) ------------------------------------- .coveragerc | 7 + HACKING.rst | 1 + devstack/local.conf.sample | 4 +- lower-constraints.txt | 25 +-- ovn_octavia_provider/common/constants.py | 2 + ovn_octavia_provider/driver.py | 29 ++-- ovn_octavia_provider/hacking/checks.py | 19 +++ ovn_octavia_provider/helper.py | 6 + requirements.txt | 2 + test-requirements.txt | 2 +- tox.ini | 9 +- zuul.d/base.yaml | 23 ++- zuul.d/project.yaml | 6 +- 20 files changed, 340 insertions(+), 56 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 5835904..a311457 100644 --- a/requirements.txt +++ b/requirements.txt @@ -9,0 +10 @@ oslo.log>=3.36.0 # Apache-2.0 +oslo.messaging>=12.4.0 # Apache-2.0 @@ -14,0 +16 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 +SQLAlchemy>=1.2.19 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index cc06d27..bbd2336 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -13 +12,0 @@ stestr>=1.0.0 # Apache-2.0 -astroid==2.1.0 # LGPLv2.1 @@ -14,0 +14 @@ pylint==2.3.0 # GPLv2 +isort==4.3.21 # MIT

1 0

trove 14.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for trove for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/trove/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/trove/src/branch/stable/victoria Release notes for trove can be found at: https://docs.openstack.org/releasenotes/trove/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/trove/+bugs and tag it *victoria-rc-potential* to bring it to the trove release crew's attention.

1 0

ceilometer 15.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for ceilometer for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ceilometer/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/ceilometer/src/branch/stable/victoria Release notes for ceilometer can be found at: https://docs.openstack.org/releasenotes/ceilometer/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ceilometer/+bugs and tag it *victoria-rc-potential* to bring it to the ceilometer release crew's attention.

1 0

aodh 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for aodh for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/aodh/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/aodh/src/branch/stable/victoria Release notes for aodh can be found at: https://docs.openstack.org/releasenotes/aodh/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/aodh/+bugs and tag it *victoria-rc-potential* to bring it to the aodh release crew's attention.

1 0

glance 21.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for glance for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/glance/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/glance/src/branch/stable/victoria Release notes for glance can be found at: https://docs.openstack.org/releasenotes/glance/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/glance/+bugs and tag it *victoria-rc-potential* to bring it to the glance release crew's attention.

1 0

murano-dashboard 10.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for murano-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/murano-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/murano-dashboard/src/branch/stable/victoria Release notes for murano-dashboard can be found at: https://docs.openstack.org/releasenotes/murano-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/murano/+bugs and tag it *victoria-rc-potential* to bring it to the murano-dashboard release crew's attention.

1 0

storlets 6.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for storlets for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/storlets/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/storlets/src/branch/stable/victoria Release notes for storlets can be found at: https://docs.openstack.org/releasenotes/storlets/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/storlets/+bugs and tag it *victoria-rc-potential* to bring it to the storlets release crew's attention.

1 0

murano-agent 6.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for murano-agent for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/murano-agent/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/murano-agent/src/branch/stable/victoria Release notes for murano-agent can be found at: https://docs.openstack.org/releasenotes/murano-agent/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/murano/+bugs and tag it *victoria-rc-potential* to bring it to the murano-agent release crew's attention.

1 0

solum-dashboard 5.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for solum-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/solum-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/solum-dashboard/src/branch/stable/victoria Release notes for solum-dashboard can be found at: https://docs.openstack.org/releasenotes/solum-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/solum/+bugs and tag it *victoria-rc-potential* to bring it to the solum-dashboard release crew's attention.

1 0

solum 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for solum for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/solum/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/solum/src/branch/stable/victoria Release notes for solum can be found at: https://docs.openstack.org/releasenotes/solum/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/solum/+bugs and tag it *victoria-rc-potential* to bring it to the solum release crew's attention.

1 0

murano 10.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for murano for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/murano/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/murano/src/branch/stable/victoria Release notes for murano can be found at: https://docs.openstack.org/releasenotes/murano/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/murano/+bugs and tag it *victoria-rc-potential* to bring it to the murano release crew's attention.

1 0

mistral-dashboard 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for mistral-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/mistral-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/mistral-dashboard/src/branch/stable/victoria Release notes for mistral-dashboard can be found at: https://docs.openstack.org/releasenotes/mistral-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/mistral/+bugs and tag it *victoria-rc-potential* to bring it to the mistral-dashboard release crew's attention.

1 0

panko 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for panko for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/panko/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/panko/src/branch/stable/victoria Release notes for panko can be found at: https://docs.openstack.org/releasenotes/panko/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/panko/+bugs and tag it *victoria-rc-potential* to bring it to the panko release crew's attention.

1 0

manila-ui 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 24 Sep '20

24 Sep '20

Hello everyone, A new release candidate for manila-ui for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/manila-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/manila-ui/src/branch/stable/victoria Release notes for manila-ui can be found at: https://docs.openstack.org/releasenotes/manila-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/manila-ui/+bugs and tag it *victoria-rc-potential* to bring it to the manila-ui release crew's attention.

1 0

networking-generic-switch 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-generic-switch for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-generic-switch/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-generic-switch/src/branch/stable/v… Release notes for networking-generic-switch can be found at: https://docs.openstack.org/releasenotes/networking-generic-switch/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/networking-generic-sw… and tag it *victoria-rc-potential* to bring it to the networking-generic-switch release crew's attention.

1 0

networking-baremetal 3.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-baremetal for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-baremetal/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-baremetal/src/branch/stable/victor… Release notes for networking-baremetal can be found at: https://docs.openstack.org/releasenotes/networking-baremetal/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/networking-baremetal and tag it *victoria-rc-potential* to bring it to the networking-baremetal release crew's attention.

1 0

searchlight 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for searchlight for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/searchlight/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/searchlight/src/branch/stable/victoria Release notes for searchlight can be found at: https://docs.openstack.org/releasenotes/searchlight/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/searchlight and tag it *victoria-rc-potential* to bring it to the searchlight release crew's attention.

1 0

searchlight-ui 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for searchlight-ui for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/searchlight-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/searchlight-ui/src/branch/stable/victoria Release notes for searchlight-ui can be found at: https://docs.openstack.org/releasenotes/searchlight-ui/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/searchlight-ui and tag it *victoria-rc-potential* to bring it to the searchlight-ui release crew's attention.

1 0

zaqar 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for zaqar for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/zaqar/src/branch/stable/victoria Release notes for zaqar can be found at: https://docs.openstack.org/releasenotes/zaqar/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar/+bugs and tag it *victoria-rc-potential* to bring it to the zaqar release crew's attention.

1 0

sahara-image-elements 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-image-elements for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-image-elements/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-image-elements/src/branch/stable/victo… Release notes for sahara-image-elements can be found at: https://docs.openstack.org/releasenotes/sahara-image-elements/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/sahara/+bugs and tag it *victoria-rc-potential* to bring it to the sahara-image-elements release crew's attention.

1 0

sahara-plugin-cdh 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-cdh for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-cdh/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-cdh/src/branch/stable/victoria Release notes for sahara-plugin-cdh can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-cdh/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1102 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-cdh release crew's attention.

1 0

sahara-dashboard 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-dashboard/src/branch/stable/victoria Release notes for sahara-dashboard can be found at: https://docs.openstack.org/releasenotes/sahara-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/sahara-dashboard and tag it *victoria-rc-potential* to bring it to the sahara-dashboard release crew's attention.

1 0

sahara 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara/src/branch/stable/victoria Release notes for sahara can be found at: https://docs.openstack.org/releasenotes/sahara/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/sahara/+bugs and tag it *victoria-rc-potential* to bring it to the sahara release crew's attention.

1 0

tacker-horizon 2.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for tacker-horizon for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/tacker-horizon/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/tacker-horizon/src/branch/stable/victoria Release notes for tacker-horizon can be found at: https://docs.openstack.org/releasenotes/tacker-horizon/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/tacker/+bugs and tag it *victoria-rc-potential* to bring it to the tacker-horizon release crew's attention.

1 0

sahara-plugin-mapr 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-mapr for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-mapr/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-mapr/src/branch/stable/victoria Release notes for sahara-plugin-mapr can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-mapr/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1103 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-mapr release crew's attention.

1 0

sahara-extra 12.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-extra for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-extra/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-extra/src/branch/stable/victoria Release notes for sahara-extra can be found at: https://docs.openstack.org/releasenotes/sahara-extra/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/sahara/+bugs and tag it *victoria-rc-potential* to bring it to the sahara-extra release crew's attention.

1 0

sahara-plugin-storm 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-storm for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-storm/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-storm/src/branch/stable/victoria Release notes for sahara-plugin-storm can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-storm/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1105 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-storm release crew's attention.

1 0

zaqar-ui 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for zaqar-ui for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zaqar-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/zaqar-ui/src/branch/stable/victoria Release notes for zaqar-ui can be found at: https://docs.openstack.org/releasenotes/zaqar-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zaqar-ui/+bugs and tag it *victoria-rc-potential* to bring it to the zaqar-ui release crew's attention.

1 0

sahara-plugin-ambari 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-ambari for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-ambari/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-ambari/src/branch/stable/victor… Release notes for sahara-plugin-ambari can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-ambari/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1101 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-ambari release crew's attention.

1 0

sahara-plugin-vanilla 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-vanilla for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-vanilla/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-vanilla/src/branch/stable/victo… Release notes for sahara-plugin-vanilla can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-vanilla/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1106 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-vanilla release crew's attention.

1 0

sahara-plugin-spark 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for sahara-plugin-spark for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/sahara-plugin-spark/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/sahara-plugin-spark/src/branch/stable/victoria Release notes for sahara-plugin-spark can be found at: https://docs.openstack.org/releasenotes/sahara-plugin-spark/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/1104 and tag it *victoria-rc-potential* to bring it to the sahara-plugin-spark release crew's attention.

1 0

bifrost 8.1.1 (ussuri)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

We are stoked to announce the release of: bifrost 8.1.1: Deployment of physical machines using OpenStack Ironic and Ansible This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/bifrost Download the package from: https://tarballs.openstack.org/bifrost/ Please report issues through: https://storyboard.openstack.org/#!/project/openstack/bifrost For more details, please see below. 8.1.1 ^^^^^ Upgrade Notes ************* * Bifrost no longer adds ironic and ironic-inspector endpoints to the public firewalld zone, the operator has to do it explicitly if external access is expected. * Adds the explicit setting of file access permissions to get_url calls in bifrost ansible playbooks to ensure that the contents of "/httpboot" are world-readable independently of which Ansible version is in use. Bug Fixes ********* * Fixes fast-track deployment after inspection/discovery by providing the correct ironic API URL to the ramdisk. * Fixes deployment in a testing environment on CentOS 8 by using firewalld instead of iptables to enable access from nodes to ironic. * Automatically enables DHCP and TFTP services in firewalld on CentOS/RHEL. * Instead of modifying the "public" firewalld zone, creates a new zone "bifrost" and puts the "network_interface" in it. Set "firewalld_internal_zone=public" to revert to the previous behavior. * Makes "/var/lib/ironic" and its images subdirectories readable by nginx. This is required for using the images cache. * Fixes ACL of PXE and iPXE boot files to make sure they are world- readable. * Resolves the issue with ansible versions 2.9.12 and 2.8.14 where implicit setting of file permissions on files downloaded with get_url calls results in overly restrictive permissions. This leads to access denied while attempting to read the contents of "/httpboot" and results in failed deployments. * Removing dependency on libselinux-python for Fedora OS family. This package is no longer present in Fedora 32 and was causing installation failures. It is safe to remove as it is used with python2 only. * On systems with SELinux enforcing, enables nginx to read symbolic links. Fixes network boot of instances. * Adds correct SELinux context for "/tftpboot". Changes in bifrost 8.1.0..8.1.1 ------------------------------- 829e670 Fix install on systems without systemd 924534a Create our own firewalld zone and use it on real bare metal d900a76 Make /var/lib/ironic/{,images,master_images} readable by nginx 49de1f9 Add correct SELinux context for /tftpboot and fix map-file ACL 5db92e3 Explicitly set permissions on /httpboot contents 3348099 Explicitly enable DHCP services on baremetal CentOS/RHEL 55f7ad3 Use firewalld to open ports on CentOS and RHEL. b3b4b85 Make the iPXE and PXE boot files world-readable 1877ad5 bifrost_inventory: use stderr for logging 334c309 selinux: allow nginx to read symbolic links d371d2d Removing libselinux-python package from Fedora dependencies dc87231 Do not use 'sudo pip install' when venv is used 1070784 Fix bifrost_venv_dir default assignment 37a9205 install-deps: install setuptools early for Debian 98442ec Fix fast-track deployment after discovery/inspection 8b3f75a Install packages all at once instead of looping over them Diffstat (except docs and test files) ------------------------------------- bifrost/inventory.py | 1 + .../bifrost-create-dib-image/defaults/main.yml | 2 +- .../bifrost-create-vm-nodes/defaults/main.yml | 2 +- .../defaults/required_defaults_Fedora.yml | 2 +- .../roles/bifrost-create-vm-nodes/tasks/main.yml | 3 +- .../roles/bifrost-ironic-install/defaults/main.yml | 4 +- .../defaults/required_defaults_Fedora.yml | 1 - .../defaults/required_defaults_RedHat_family.yml | 2 + .../bifrost-ironic-install/files/ironic_policy.te | 4 +- .../bifrost-ironic-install/tasks/bootstrap.yml | 45 ++++++++++++++++- .../tasks/create_tftpboot.yml | 57 ++++++++++++++++++---- .../tasks/download_ipa_image.yml | 22 ++++++++- .../bifrost-ironic-install/tasks/get_ipxe.yml | 6 +++ .../tasks/inspector_bootstrap.yml | 18 ++++++- .../roles/bifrost-ironic-install/tasks/install.yml | 6 +-- .../tasks/setup_firewalld.yml | 50 +++++++++++++++++++ .../templates/inspector-default-boot-ipxe.j2 | 2 +- .../bifrost-keystone-install/defaults/main.yml | 2 +- .../bifrost-keystone-install/tasks/install.yml | 3 +- .../fast-track-inspection-a28a062e86f06190.yaml | 5 ++ releasenotes/notes/firewalld-d53c6396828b91ee.yaml | 5 ++ .../notes/firewalld-services-4c255c02d8d427f8.yaml | 4 ++ .../notes/firewalld-zone-d8c72fb5924a4916.yaml | 11 +++++ .../notes/images-permissions-2042490e3ca13656.yaml | 5 ++ releasenotes/notes/pxe-acl-26f3be809caa0c88.yaml | 4 ++ .../notes/releasenote-341a5eebe6168aea.yaml | 13 +++++ .../notes/releasenote-94bcb2b0da207f94.yaml | 7 +++ .../notes/selinux-lnk_file-527ac51c60f9c2ad.yaml | 5 ++ .../notes/tftp-context-6f918743ba9052b0.yaml | 4 ++ scripts/install-deps.sh | 14 ++++-- 30 files changed, 276 insertions(+), 33 deletions(-)

1 0

networking-bgpvpn 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-bgpvpn for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-bgpvpn/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-bgpvpn/src/branch/stable/victoria Release notes for networking-bgpvpn can be found at: https://docs.openstack.org/releasenotes/networking-bgpvpn/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/bgpvpn/+bugs and tag it *victoria-rc-potential* to bring it to the networking-bgpvpn release crew's attention.

1 0

ironic-inspector 10.1.1 (ussuri)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

We are psyched to announce the release of: ironic-inspector 10.1.1: Hardware introspection for OpenStack Bare Metal This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/ironic-inspector Download the package from: https://tarballs.openstack.org/ironic-inspector/ Please report issues through: https://storyboard.openstack.org/#!/project/944 For more details, please see below. 10.1.1 ^^^^^^ Bug Fixes * Fixes the issue that IPv6 link local addresses are ignored during interface validation which fails introspection. * Fixes "AttributeError: 'Node' object has no attribute 'uuid'" when trying to introspect an active node that is not currently in the cache. * No longer aborts the whole process if one periodic task fails. * Fixes the node identification logic to enable a user to list the "redfish_address" label for "driver_info" field values for identification of a machine using the "[DEFAULT]ipmi_address_fields" configuration option. Previously the host would just not be matched as the full URL would be evaluated instead of what the URL may resolve to. * Fixes accessing API endpoints with trailing slashes. Now they're treated the same way as without slashes, although the latter remain canonical URLs. * No longer uses introspection delay for nodes with "manage_boot==False" (i.e. boot is managed by ironic). It is useless and may actually break introspection if a node boots before it gets whitelisted in the PXE filter. * The introspection start API is now synchronous when "manage_boot==False". This means that any failures will be propagated to ironic, preventing it from powering a node on and booting it without the PXE filter updated. * No longer tries to set "local_gb" to -1 if the matched root device has size of zero. Changes in ironic-inspector 10.1.0..10.1.1 ------------------------------------------ bc4311e Fix URL parsing to enable redfish_address matching 1f676f9 Add variable to set inspection timeout in tempest tests 470c2f4 Do not try to set local_gb to -1 when the matched root device size is 0 19e0281 Make inspector base CI job use 2 CPUs 4cb904f Use node.id instead of node.uuid in record_node 0551943 Accept IPv6 link local address during interface validation 244cb9c Stop running a periodic task for the noop PXE filter beb14ad Set tempest_test_timeout for managed job 42c64f7 Update TOX_CONSTRAINTS_FILE for stable/ussuri 963e9cf Treat endpoints with trailing slashes the same way as without them 391267f Make POST /v1/introspection synchronous when manage_boot==False 6c7fda7 Avoid using introspection start delays with non-managed boot ba259cd Monkey patch original current_thread _active 9befd27 Update local.conf example file. aa12a8b Fix grenade job f95c81e Silence debug logging from oslo_messaging 5eb1731 Stop aborting the process on periodic task failures f34ddbc Remove testresources and testscenarios from test-requirements 61f46d9 Update .gitreview for stable/ussuri Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + devstack/example.local.conf | 60 ++++++++++++---------- devstack/plugin.sh | 4 ++ ironic_inspector/cmd/__init__.py | 6 +++ ironic_inspector/common/ironic.py | 8 +++ ironic_inspector/conductor/manager.py | 28 +++++----- ironic_inspector/conf/default.py | 8 +-- ironic_inspector/conf/opts.py | 5 +- ironic_inspector/introspect.py | 42 ++++++++------- ironic_inspector/main.py | 18 ++++--- ironic_inspector/node_cache.py | 5 +- ironic_inspector/plugins/standard.py | 19 ++++--- ironic_inspector/pxe_filter/base.py | 3 ++ ironic_inspector/test/unit/test_common_ironic.py | 37 +++++++++++++ ironic_inspector/test/unit/test_introspect.py | 18 +++++++ ironic_inspector/test/unit/test_main.py | 10 +++- ironic_inspector/test/unit/test_manager.py | 37 +------------ ironic_inspector/test/unit/test_node_cache.py | 1 + .../test/unit/test_plugins_standard.py | 29 ++++------- ironic_inspector/test/unit/test_pxe_filter.py | 12 +++-- ...accept-link-local-address-1fbb9cbdc3f980bb.yaml | 5 ++ releasenotes/notes/node-id-920629472f01c83a.yaml | 5 ++ releasenotes/notes/periodics-18bf7fb57777c043.yaml | 4 ++ .../support_redfish_address-94eae2c0d2879f53.yaml | 8 +++ .../notes/trailing-slashes-93c2466b71829ec1.yaml | 5 ++ .../notes/unmanaged-delay-d39871e1346d9448.yaml | 6 +++ .../notes/unmanaged-result-4de3788e7820e3c5.yaml | 6 +++ releasenotes/notes/zero-size-55c4b4f2b9e8384d.yaml | 5 ++ test-requirements.txt | 2 - tox.ini | 2 +- zuul.d/ironic-inspector-jobs.yaml | 10 +++- 31 files changed, 264 insertions(+), 145 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index ce6c002..c35985f 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -19,2 +18,0 @@ fixtures>=3.0.0 # Apache-2.0/BSD -testresources>=2.0.0 # Apache-2.0/BSD -testscenarios>=0.4 # Apache-2.0/BSD

1 0

networking-sfc 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-sfc for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-sfc/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-sfc/src/branch/stable/victoria Release notes for networking-sfc can be found at: https://docs.openstack.org/releasenotes/networking-sfc/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-sfc/+bugs and tag it *victoria-rc-potential* to bring it to the networking-sfc release crew's attention.

1 0

networking-odl 17.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-odl for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-odl/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-odl/src/branch/stable/victoria Release notes for networking-odl can be found at: https://docs.openstack.org/releasenotes/networking-odl/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-odl/+bugs and tag it *victoria-rc-potential* to bring it to the networking-odl release crew's attention.

1 0

networking-bagpipe 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-bagpipe for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-bagpipe/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-bagpipe/src/branch/stable/victoria Release notes for networking-bagpipe can be found at: https://docs.openstack.org/releasenotes/networking-bagpipe/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-bagpipe/+bugs and tag it *victoria-rc-potential* to bring it to the networking-bagpipe release crew's attention.

1 0

neutron-vpnaas 17.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for neutron-vpnaas for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-vpnaas/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/neutron-vpnaas/src/branch/stable/victoria Release notes for neutron-vpnaas can be found at: https://docs.openstack.org/releasenotes/neutron-vpnaas/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *victoria-rc-potential* to bring it to the neutron-vpnaas release crew's attention.

1 0

neutron-vpnaas-dashboard 3.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for neutron-vpnaas-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-vpnaas-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/neutron-vpnaas-dashboard/src/branch/stable/vi… Release notes for neutron-vpnaas-dashboard can be found at: https://docs.openstack.org/releasenotes/neutron-vpnaas-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron-vpnaas-dashboard/+bugs and tag it *victoria-rc-potential* to bring it to the neutron-vpnaas-dashboard release crew's attention.

1 0

networking-midonet 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for networking-midonet for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-midonet/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-midonet/src/branch/stable/victoria Release notes for networking-midonet can be found at: https://docs.openstack.org/releasenotes/networking-midonet/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-midonet/+bugs and tag it *victoria-rc-potential* to bring it to the networking-midonet release crew's attention.

1 0

neutron-dynamic-routing 17.0.0.0rc1 (victoria)
by no-reply＠openstack.org 23 Sep '20

23 Sep '20

Hello everyone, A new release candidate for neutron-dynamic-routing for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/neutron-dynamic-routing/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/neutron-dynamic-routing/src/branch/stable/vic… Release notes for neutron-dynamic-routing can be found at: https://docs.openstack.org/releasenotes/neutron-dynamic-routing/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/neutron/+bugs and tag it *victoria-rc-potential* to bring it to the neutron-dynamic-routing release crew's attention.

1 0

zun 6.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for zun for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/zun/src/branch/stable/victoria Release notes for zun can be found at: https://docs.openstack.org/releasenotes/zun/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun/+bugs and tag it *victoria-rc-potential* to bring it to the zun release crew's attention.

1 0

python-watcher 5.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for python-watcher for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/python-watcher/src/branch/stable/victoria Release notes for python-watcher can be found at: https://docs.openstack.org/releasenotes/watcher/

1 0

openstack-heat 15.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for openstack-heat for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/heat/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/openstack-heat/src/branch/stable/victoria Release notes for openstack-heat can be found at: https://docs.openstack.org/releasenotes/heat/

1 0

openstack-cyborg 5.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for openstack-cyborg for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cyborg/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/openstack-cyborg/src/branch/stable/victoria Release notes for openstack-cyborg can be found at: https://docs.openstack.org/releasenotes/cyborg/

1 0

blazar-dashboard 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for blazar-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/blazar-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/blazar-dashboard/src/branch/stable/victoria Release notes for blazar-dashboard can be found at: https://docs.openstack.org/releasenotes/blazar-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/blazar/+bugs and tag it *victoria-rc-potential* to bring it to the blazar-dashboard release crew's attention.

1 0

watcher-dashboard 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for watcher-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/watcher-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/watcher-dashboard/src/branch/stable/victoria Release notes for watcher-dashboard can be found at: https://docs.openstack.org/releasenotes/watcher-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/watcher-dashboard/+bugs and tag it *victoria-rc-potential* to bring it to the watcher-dashboard release crew's attention.

1 0

networking-hyperv 9.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for networking-hyperv for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/networking-hyperv/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/networking-hyperv/src/branch/stable/victoria Release notes for networking-hyperv can be found at: https://docs.openstack.org/releasenotes/networking-hyperv/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/networking-hyperv/+bugs and tag it *victoria-rc-potential* to bring it to the networking-hyperv release crew's attention.

1 0

compute-hyperv 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for compute-hyperv for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/compute-hyperv/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/compute-hyperv/src/branch/stable/victoria Release notes for compute-hyperv can be found at: https://docs.openstack.org/releasenotes/compute-hyperv/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/compute-hyperv/+bugs and tag it *victoria-rc-potential* to bring it to the compute-hyperv release crew's attention.

1 0

zun-ui 6.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for zun-ui for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/zun-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/zun-ui/src/branch/stable/victoria Release notes for zun-ui can be found at: https://docs.openstack.org/releasenotes/zun-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/zun-ui/+bugs and tag it *victoria-rc-potential* to bring it to the zun-ui release crew's attention.

1 0

kuryr-libnetwork 6.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for kuryr-libnetwork for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/kuryr-libnetwork/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/kuryr-libnetwork/src/branch/stable/victoria Release notes for kuryr-libnetwork can be found at: https://docs.openstack.org/releasenotes/kuryr-libnetwork/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/kuryr-libnetwork/+bugs and tag it *victoria-rc-potential* to bring it to the kuryr-libnetwork release crew's attention.

1 0

magnum-ui 7.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for magnum-ui for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/magnum-ui/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/magnum-ui/src/branch/stable/victoria Release notes for magnum-ui can be found at: https://docs.openstack.org/releasenotes/magnum-ui/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/magnum-ui/+bugs and tag it *victoria-rc-potential* to bring it to the magnum-ui release crew's attention.

1 0

qinling 5.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for qinling for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/qinling/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/qinling/src/branch/stable/victoria Release notes for qinling can be found at: https://docs.openstack.org/releasenotes/qinling/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/927 and tag it *victoria-rc-potential* to bring it to the qinling release crew's attention.

1 0

magnum 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for magnum for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/magnum/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/magnum/src/branch/stable/victoria Release notes for magnum can be found at: https://docs.openstack.org/releasenotes/magnum/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/magnum/+bugs and tag it *victoria-rc-potential* to bring it to the magnum release crew's attention.

1 0

cloudkitty-dashboard 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for cloudkitty-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/cloudkitty-dashboard/src/branch/stable/victor… Release notes for cloudkitty-dashboard can be found at: https://docs.openstack.org/releasenotes/cloudkitty-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty-dashboard and tag it *victoria-rc-potential* to bring it to the cloudkitty-dashboard release crew's attention.

1 0

cloudkitty 13.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for cloudkitty for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/cloudkitty/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/cloudkitty/src/branch/stable/victoria Release notes for cloudkitty can be found at: https://docs.openstack.org/releasenotes/cloudkitty/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/cloudkitty and tag it *victoria-rc-potential* to bring it to the cloudkitty release crew's attention.

1 0

qinling-dashboard 4.0.0.0rc1 (victoria)
by no-reply＠openstack.org 22 Sep '20

22 Sep '20

Hello everyone, A new release candidate for qinling-dashboard for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/qinling-dashboard/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/qinling-dashboard/src/branch/stable/victoria Release notes for qinling-dashboard can be found at: https://docs.openstack.org/releasenotes/qinling-dashboard/ If you find an issue that could be considered release-critical, please file it at: https://storyboard.openstack.org/#!/project/openstack/qinling-dashboard and tag it *victoria-rc-potential* to bring it to the qinling-dashboard release crew's attention.

1 0

ec2-api 11.0.0.0rc1 (victoria)
by no-reply＠openstack.org 21 Sep '20

21 Sep '20

Hello everyone, A new release candidate for ec2-api for the end of the Victoria cycle is available! You can find the source code tarball at: https://tarballs.openstack.org/ec2-api/ Unless release-critical issues are found that warrant a release candidate respin, this candidate will be formally released as the final Victoria release. You are therefore strongly encouraged to test and validate this tarball! Alternatively, you can directly test the stable/victoria release branch at: https://opendev.org/openstack/ec2-api/src/branch/stable/victoria Release notes for ec2-api can be found at: https://docs.openstack.org/releasenotes/ec2-api/ If you find an issue that could be considered release-critical, please file it at: https://bugs.launchpad.net/ec2-api/+bugs and tag it *victoria-rc-potential* to bring it to the ec2-api release crew's attention.

1 0

patrole 0.10.0 (victoria)
by no-reply＠openstack.org 21 Sep '20

21 Sep '20

We are psyched to announce the release of: patrole 0.10.0: Patrole is a tool for verifying that Role-Based Access Control is being enforced across OpenStack deployments. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/patrole Download the package from: https://tarballs.openstack.org/patrole/ Please report issues through: https://bugs.launchpad.net/patrole/+bugs For more details, please see below. 0.10.0 ^^^^^^ Prelude ******* This release is to tag the Patrole for OpenStack Victoria release. This release marks the start of Victoria release support in Patrole. After this release, Patrole will support below OpenStack Releases: * Victoria * Ussuri * Train * Stein Current development of Patrole is for OpenStack Wallaby development cycle. Every Patrole commit is also tested against master during the Wallaby cycle. However, this does not necessarily mean that using Patrole as of this tag will work against a Wallaby (or future release) cloud. To be on safe side, use this tag to test the OpenStack Victoria release. New Features ************ * A new policy feature flag called "[policy_feature_flag].changed_nova_policies_victoria" has been added to Patrole's config to handle Nova policies changed in Victoria. The policy feature flag is applied to tests that use policies changed in Victoria, including the following: * os_compute_api:os-hosts * os_compute_api:os-tenant-networks * os_compute_api:os-volumes * os_compute_api:os-security-groups Changes in patrole 0.9.0..0.10.0 -------------------------------- 782375d Add releasenote to tag the Patrole for Victoria release ff2fba2 Clean up tox.ini and document zuul.yaml settings 89d9ff8 Fix Extension gates by supporting Skip Execption in test case. 8746b77 fix patrole-multinode-member non-voting gate by skip_because a bug 2c80e38 Get the patrole gate working due to Nova category changes in Victoria 8e3b032 Set admin, member and reader gates to be the same 8592e58 [goal] Migrate patrole jobs to focal a5b51b6 Shorten Identity project name due to 64 char limit. cfac16a Fix gate for multiple issues 7a69fa0 Stop to use the __future__ module. 5d65c58 Switch to newer openstackdocstheme and reno versions 5a0c57c Fix hacking min version to 3.0.1 14d076b Followup for grouping imports c5ea6f2 Use unittest.mock instead of third party mock 15d8f26 Switch testing to Victoria testing runtime a19f3db Add Patrole gate job for stable/ussuri 6d97d0f Add Patrole gate job for stable/train 1d88d08 Add release notes page for version 0.9.0 5214bdc Fix typo in contributor guide 1fcf4bb Remove the stable rocky job from Patrole master gate d69a636 Cleanup py27 support Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 77 ++++++++++++++-------- devstack/plugin.sh | 15 +++++ lower-constraints.txt | 12 +--- patrole_tempest_plugin/config.py | 7 +- patrole_tempest_plugin/rbac_rule_validation.py | 9 +++ .../api/compute/test_quota_class_sets_rbac.py | 2 +- .../test_server_misc_policy_actions_rbac.py | 13 +++- .../compute/test_server_volume_attachments_rbac.py | 1 + .../api/identity/v3/test_oauth_consumers_rbac.py | 4 +- ...ed-nova-policies-victoria-7a5f123238b099d9.yaml | 13 ++++ .../patrole-victoria-release-e3dc105ed55a7c4c.yaml | 17 +++++ releasenotes/source/conf.py | 12 ++-- releasenotes/source/index.rst | 1 + releasenotes/source/v0.9.0.rst | 6 ++ setup.cfg | 11 +--- setup.py | 9 --- test-requirements.txt | 4 +- tox.ini | 24 ++++--- 34 files changed, 267 insertions(+), 128 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 63f290c..11f4a60 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -4 +4 @@ -hacking>=3.0,<3.1.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0 @@ -6 +5,0 @@ fixtures>=3.0.0 # Apache-2.0/BSD -mock>=2.0.0 # BSD @@ -11,0 +11 @@ bandit>=1.5 # Apache-2.0 +mock>=2.0.0 # BSD

1 0

ironic-python-agent-builder 2.2.0
by no-reply＠openstack.org 21 Sep '20

21 Sep '20

We are pumped to announce the release of: ironic-python-agent-builder 2.2.0: Tools and scripts to build Ironic Python Agent The source is available from: https://opendev.org/openstack/ironic-python-agent-builder Download the package from: https://tarballs.openstack.org/ironic-python-agent-builder/ For more details, please see below. Changes in ironic-python-agent-builder 2.1.0..2.2.0 --------------------------------------------------- 69e41ff Fix typo in spelling of "finalise", breaking build 841ef66 Fix cacert path for TLS element c683807 Add dosfsutils for EFI to tinyipa da78fa0 Followups for TLS support 79715dd Add element to configure IPA with TLS, use configdir 8602442 Install libssl-dev / openssl-devel when building IPA 0ece507 Use converted ipa jobs def99cd Build centos8 on centos8 bf4d98a Move zuul config in zuul.d 54aa2ca Leave kbd installed 8556bda Remove old proc before finalising tinyipa b609df3 Pin pip version to install in tinyipa images 11bb109 Fix finalise tinyipa 089ec16 Update name of ipa job Diffstat (except docs and test files) ------------------------------------- .../ironic-python-agent.conf | 2 +- .../ironic-python-agent.init | 2 +- .../ironic-python-agent.service | 2 +- .../package-installs.yaml | 6 +-- dib/ironic-python-agent-ramdisk/pkg-map | 1 + .../static/etc/ironic-python-agent.d/README | 3 ++ dib/ironic-python-agent-tls/README.rst | 32 +++++++++++++ dib/ironic-python-agent-tls/element-deps | 1 + .../pre-finalise.d/10-configure-ipa-tls | 37 +++++++++++++++ tinyipa/build-tinyipa.sh | 4 +- tinyipa/build_files/finalreqs.lst | 1 + tinyipa/common.sh | 2 + tinyipa/finalise-tinyipa.sh | 13 +++++- .../ironic-python-agent-builder-jobs.yaml | 52 +--------------------- zuul.d/project.yaml | 45 +++++++++++++++++++ 15 files changed, 144 insertions(+), 59 deletions(-)

1 0

virtualbmc 2.2.0
by no-reply＠openstack.org 21 Sep '20

21 Sep '20

We are pleased to announce the release of: virtualbmc 2.2.0: Create virtual BMCs for controlling virtual instances via IPMI The source is available from: https://opendev.org/openstack/virtualbmc Download the package from: https://tarballs.openstack.org/virtualbmc/ For more details, please see below. Changes in virtualbmc 2.1.0..2.2.0 ---------------------------------- d79f823 Fix lower-constraints for ubuntu focal 9d0750a Correct vmbc add command 43925d2 Set min version of tox to 3.2.1 1dbfd44 drop mock from lower-constraints 3c4390a Remove unneded Babel config 3602737 Update lower-constraints.txt e9854ff Switch to newer openstackdocstheme and reno versions 4312849 Fix doc build failure 71773f6 Do not import print function from __future__ Diffstat (except docs and test files) ------------------------------------- babel.cfg | 2 -- bindep.txt | 18 +++++++++--------- lower-constraints.txt | 23 ++++++++++++----------- releasenotes/source/conf.py | 6 +++++- requirements.txt | 6 +++--- setup.cfg | 14 -------------- test-requirements.txt | 6 +++--- tox.ini | 2 +- virtualbmc/cmd/vbmcd.py | 2 -- 11 files changed, 38 insertions(+), 50 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 0ec64bb..60d2d4c 100644 --- a/requirements.txt +++ b/requirements.txt @@ -6,2 +6,2 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 -libvirt-python!=4.1.0,>=3.7.0 # LGPLv2+ -pyghmi>=1.0.22 # Apache-2.0 +libvirt-python>=6.0.0 # LGPLv2+ +pyghmi>=1.2.0 # Apache-2.0 @@ -9 +9 @@ cliff!=2.9.0,>=2.8.0 # Apache-2.0 -pyzmq>=14.3.1 # LGPL+BSD +pyzmq>=19.0.0 # LGPL+BSD diff --git a/test-requirements.txt b/test-requirements.txt index 82137ae..a153cb4 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -11,2 +11,2 @@ python-subunit>=1.0.0 # Apache-2.0/BSD -sphinx!=1.6.6,!=1.6.7,!=2.1.0,>=1.6.2 # BSD -openstackdocstheme>=1.20.0 # Apache-2.0 +sphinx>=2.0.0,!=2.1.0 # BSD +openstackdocstheme>=2.2.1 # Apache-2.0 @@ -20 +20 @@ stestr>=1.0.0 # Apache-2.0 -reno>=2.5.0 # Apache-2.0 +reno>=3.1.0 # Apache-2.0

1 0

tempest 25.0.0 (victoria)
by no-reply＠openstack.org 18 Sep '20

18 Sep '20

We are jazzed to announce the release of: tempest 25.0.0: OpenStack Integration Testing This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/tempest Download the package from: https://pypi.org/project/tempest Please report issues through: https://bugs.launchpad.net/tempest/+bugs For more details, please see below. 25.0.0 ^^^^^^ Prelude ******* This release is to tag the Tempest for OpenStack Victoria release. This release marks the start of Victoria release support in Tempest. After this release, Tempest will support below OpenStack Releases: * Victoria * Ussuri * Train * Stein Current development of Tempest is for OpenStack Wallaby development cycle. Every Tempest commit is also tested against master during the Wallaby cycle. However, this does not necessarily mean that using Tempest as of this tag will work against a Victoria (or future release) cloud. To be on safe side, use this tag to test the OpenStack Victoria release. New Features ************ * Add a new config option can_migrate_between_any_hosts in the compute-feature-enabled section, which can be set to False for environment with non homogeneous compute nodes, so that it can select a destination host for migrating automatically, otherwise the testcase may fail unexpectedly. e.g., if source host is with CPU "E5-2699 v4" and the selected target host is with CPU "E5-2670 v3", the live-migration will fail because of the downgrade issue. * Add glance image import APIs function to v2 images_client library. * stage_image_file * info_import * info_stores * image_import * [blueprint blueprint adopt-oslo-versioned-objects-for-db (https://blueprints.launchpad.net/neutron/+spec/adopt-oslo- versioned-objects-for-db)] Any reference to "tenant_id" in Network objects is replaced with "project_id". Upgrade Notes ************* * The following deprecated image scenario options are removed after a ~4 year deprecation period. * "ami_img_file" * "ari_img_file" * "aki_img_file" Starting Tempest 25.0.0 release, CONF.scenario.img_file need a full path for the image. CONF.scenario.img_dir was deprecated and will be removed in the next release. Till Tempest 25.0.0, old behavior is maintained and keep working but starting Tempest 26.0.0, you need to specify the full path in CONF.scenario.img_file config option. * "Member" role has been deprecated and replaced by "member". Therefore the default value of config option "[object- storage].operator_role" is changed to "member". (Fixes bug #1330132) * Remove the deprecated CLI "tempest-account-generator" in favor of "tempest account-generator" command. You can use "tempest account- generator" CLI to generate the accounts yaml file. Bug Fixes ********* * Fixed bug #1890060. tempest subunit_describe_calls --verbose not working with Cliff CLI. The subunit_describe_calls --verbose argument was a boolean and worked in the non Cliff CLI which is now deprecated, but does not work with cliff since --verbase is a standard cliff argument which is an int. Since the tool is in lib directory we cannot change the interface, so we add a new argument -a --all-stdout that will allow cliff CLI to support the feature in subunnit_describe_calls to print request and response headers and bodies to stdout. * is_resource_deleted method of v3 volumes_client might have returned a KeyError exception due to an incorrect accessing of a volume id in the case the volume was in error_deleting state. incorrect code - volume['id'] correct code - volume['volume']['id'] More details about the issue can be found at https://bugs.launchpad.net/tempest/+bug/1887980 * Concurrency parameter for account-generator command was accepting negative values and zero. The concurrency parameter now accepts only positive numbers. When a negative value or zero is passed to the program then the program ends and help is displayed. Other Notes *********** * New configuration options "CONF.glance.image_feature_enabled.image_import" has been introduced to enable the image import tests. If your glance deployement support image import functionality then you can enable the image import tests via this flag. Default value of this new config option is false. Changes in tempest 24.0.0..25.0.0 --------------------------------- c8d7a0101 Add releasenote to tag the Tempest for Victoria release 548e2d0b0 Use stable constraint in tox to release new tag for Victoria a09be7e01 Fix test_allowed_address_pair test case cleanup ae6311373 Need to have stable implementation of nova_volume_detach() and add missing docstrings 0c84f3ee2 Need to have stable tempest scenario manager 0976ae4ee Skip test_qos_min_bw_allocation_basic when not supported e866da9a1 Wait until dependent resource is deleted be8d51095 Use of single interface for creating image ff145e61c Use the networking-l2gw project new location 0539a64d1 Adding description for testcases - swift part2 6aa733e0f Improve unit tests for subunit_describe_calls 85535164b Adding description for testcases - swift part3 0a07a0e51 Fix and unskip test_list_servers_filtered_by_ip_regex 067bcd070 Adding description for testcases - volume part5 a56823734 Adding description for testcases - volume part4 735e169ff Adding description for testcases - compute part12 e354fa767 Adding description for testcases - compute part9 36ef089e1 Adding description for testcases - compute part7 4e726a669 Adding description for testcases - compute part6 8e3aacd7e Adding description for testcases - identity part2 a7635d717 Adding description for testcases - identity part5 b5603bc4f Adding description for testcases - compute part5 67b3d3893 Adding description for testcases - compute part4 fe7a983a3 Add default headers to the volume show_version request 1425ecd42 Add glance image import web-download tests a9af3ead3 Add new tests for check-uuid tool b9358201c Adding description for testcases - identity part3 fcfb31bcc Adding description for testcases - volume part2 4810d887f Adding description for testcases - network part1 0abb76f9a Adding description for testcases - network part3 7cff13079 Tempest tests for glance import workflow 14e2a4e42 Fix KeyError exc in volumes_client 8aea02153 Stop to use the __future__ module. 99b7c11af remote_client: Use blkid -L to find config drive by filesystem label 0aa0636a0 Fix tempest plugin cookicutter repo path b4e0e2c7e zuul: clean up some legacy jobs 93a047f42 Add response schema validation for volume backups e18335e1a Add skip flags for block level live migration e1eebfa84 Replace mock by unittest.mock in 2 forgotten cases 4f633edd9 Remove checking of Accept-Range header d89122be4 Document the process to pin the constraint in tox.ini 02af6a44c Remove deprecated scenario image options aaaafbb5b Fix pdf-doc build by skiping the sample file 42e111c7d object storage: fix and cleanup header checks 536d8284f Add unit tests for check_uuid.py 7cbe8b6b5 Add check_service_availability test 217eebd0b Fix pygments style 173c5c000 Unstable test_container_synchronization fba44537c Unstable test_server_connectivity_cold_migration_revert 4c709ecaa Use python3 venv instead of virtualenv cbf480ffa Fix request body for compute unshelve action API 8517b918a Fix test_get_service_by_invalid_params for microversion 2.75 58b053867 Fix the argument check for account-generator 99d4dae68 Change 'Member' role reference to 'member' 423ae450d Fix 404 when deleteing volume group d89c6cb4a Fix flavor swap default value for compute microversion 2.75 3cb4772db Add response schema validation for volumes fc7dd52a7 [compute] Blacklist test_create_second_image due to race c1449d4ff Remove any reference to "tenant_id" in network 1f4bf4933 Allow snapshot name with null a0e87dc58 Adding description for testcases - compute part3 7454db5d4 Add response schema validation for show_default_group_type da8d25849 Add response schema validation for volume groups 9f0c59aed Add response schema validation for volume group snapshots eee87b504 Cap jsonschema 3.2.0 as the minimal version 706723954 Sort roles in keystone token 2c8e8ae0e Add image "version" metadata in test_snapshot_pattern 05fc4f72b Adding description for testcases - network part2 adb162024 Add response schema validation for volume snapshots 126e996f0 Add response schema validation for volume pools 40e5eaa08 [Trivial]Do not use self in class method 19a487e5d Add response schema validation for volume group types e973452ce Add response schema validation for encryption types 0fbce1722 Switch to newer openstackdocstheme and reno versions eed8074e6 Use unittest.mock instead of third party mock 2fd745f97 compute: Fix boot from volume stable rescue tests 7ac89c977 Add explicit external network for test_create_router_set_gateway_with_fixed_ip 4bbe5b58e Add migration uuid API schema validation for 2.59 f4b5df6d1 Fix check_floating_ip_status utility's output 15d63094c Prevent raising exception if IP address is set in _hotplug_server 8d1974efa Bump hacking min version to 3.0.1 abda8712a test_server_rescue.py should use CONF.volume.volume_size a85788042 Improve logging in tempest cleanup 710e877e4 Fix redirect for doc section 2f273243f Don't use deprecated configparser.readfp de69845d7 Switch testing to Victoria testing runtime f62dbc1c2 Add tempest-cleanup ansible role 08a40ad12 Use ensure-pip for stackviz pip install da3bb61f1 Add index page for plugins documents 96800bb83 Add document for stable branch testing for tempest plugins e8f1876aa Update supported version doc tempest 8c5333b06 Move ceph job to voting 6a2be436f Make image_ssh_password a secret so it does not show in console 239258820 Adding description for testcases - identity part4 f8b8987c5 Move the grenade-py3 job to new zuulv3 grenade job name 6d6bf5e6e Add Tempest gate job for stable/ussuri 2ad7ca4c0 compute: Add stable device rescue tests with BFV instances 5d7b43c00 Add release notes page for version 24.0.0 d9654dae5 Fix typo in contributor guide ba416467e Remove the stable rocky from supported branch in Tempest master 99b085bdb Set TOX_CONSTRAINTS_FILE 06e1ba956 Use new encryption provider constants (reprise) 6726b74f4 Use the master constraint again in tox.ini 2ae7f55cb Adding description for testcases - image part2 e68f435b0 Adding description for testcases - image part1 abc06c36e Integrated gate storage/swift: blacklist more tests b774666aa run-tempest: save the result of tempest execution ddcd4f44a Remove the deprecated tempest-account-generator CLI 39f48588e Modify the fake data be86aec05 Change bytes to str in servers_client for python3 be052d619 Do not specify a host for live-migration for non homogeneous nodes b20c3a5cc Enable xindy for PDF build 40bbe0c91 Add response schema validation for volume limits Diffstat (except docs and test files) ------------------------------------- .gitignore | 2 +- .zuul.yaml | 55 +- HACKING.rst | 2 +- .../requirement_upper_constraint_for_tempest.rst | 56 ++ playbooks/devstack-tempest.yaml | 43 +- .../25/subunt-describe-call-verbose-arg-fix.yaml | 10 + ...-bug-in-v3-volumes_client-ff5d9b894f2257c8.yaml | 10 + ...ed-image-scenario-options-b573c60e873ab451.yaml | 15 + ...f-operator_role-to-member-f9c3abd2ebde23b7.yaml | 6 + ...pts-positive-numbers-only-33a366a297494ef7.yaml | 7 + .../notes/account_generator-6eb03f664a448c35.yaml | 7 + ...n-any-hosts-config-option-x8ah4f9737a28e9b.yaml | 9 + ...ge_import_testing_support-22ba4bcb9f2fb848.yaml | 17 + ...etwork-swap-to-project_id-a1d7fdf6c5e1cf44.yaml | 6 + .../tempest-victoria-release-27000c02edc5a112.yaml | 16 + releasenotes/source/conf.py | 8 +- releasenotes/source/index.rst | 1 + releasenotes/source/v24.0.0.rst | 6 + requirements.txt | 2 +- roles/process-stackviz/tasks/main.yaml | 13 +- roles/run-tempest/README.rst | 3 + roles/run-tempest/tasks/main.yaml | 4 +- roles/tempest-cleanup/README.rst | 33 ++ roles/tempest-cleanup/defaults/main.yaml | 3 + roles/tempest-cleanup/tasks/main.yaml | 31 ++ setup.cfg | 2 +- tempest/api/compute/admin/test_agents.py | 11 +- tempest/api/compute/admin/test_aggregates.py | 35 +- .../api/compute/admin/test_aggregates_negative.py | 28 +- .../api/compute/admin/test_availability_zone.py | 4 +- .../admin/test_availability_zone_negative.py | 10 +- tempest/api/compute/admin/test_create_server.py | 4 +- tempest/api/compute/admin/test_delete_server.py | 6 +- tempest/api/compute/admin/test_fixed_ips.py | 4 + .../api/compute/admin/test_fixed_ips_negative.py | 6 + tempest/api/compute/admin/test_flavors.py | 5 +- tempest/api/compute/admin/test_flavors_access.py | 10 +- .../compute/admin/test_flavors_access_negative.py | 8 +- .../compute/admin/test_flavors_microversions.py | 8 + .../api/compute/admin/test_floating_ips_bulk.py | 2 +- tempest/api/compute/admin/test_hosts.py | 24 +- tempest/api/compute/admin/test_hosts_negative.py | 40 +- tempest/api/compute/admin/test_hypervisor.py | 19 +- .../api/compute/admin/test_hypervisor_negative.py | 25 +- tempest/api/compute/admin/test_keypairs_v210.py | 9 + tempest/api/compute/admin/test_live_migration.py | 30 +- .../compute/admin/test_live_migration_negative.py | 5 +- tempest/api/compute/admin/test_quotas.py | 32 +- tempest/api/compute/admin/test_quotas_negative.py | 14 +- .../admin/test_server_diagnostics_negative.py | 6 +- tempest/api/compute/admin/test_servers.py | 32 +- tempest/api/compute/admin/test_servers_negative.py | 10 +- tempest/api/compute/admin/test_services.py | 11 +- .../api/compute/admin/test_services_negative.py | 3 + .../api/compute/admin/test_simple_tenant_usage.py | 7 +- .../admin/test_simple_tenant_usage_negative.py | 7 +- tempest/api/compute/base.py | 20 + .../api/compute/certificates/test_certificates.py | 5 +- tempest/api/compute/flavors/test_flavors.py | 23 +- .../floating_ips/test_floating_ips_actions.py | 18 +- .../test_floating_ips_actions_negative.py | 27 +- .../compute/floating_ips/test_list_floating_ips.py | 7 +- .../test_list_floating_ips_negative.py | 8 +- tempest/api/compute/images/test_image_metadata.py | 34 +- .../compute/images/test_image_metadata_negative.py | 20 +- tempest/api/compute/images/test_images.py | 6 + tempest/api/compute/images/test_images_negative.py | 32 +- tempest/api/compute/images/test_list_images.py | 14 +- tempest/api/compute/keypairs/test_keypairs.py | 13 +- .../api/compute/keypairs/test_keypairs_negative.py | 18 +- tempest/api/compute/keypairs/test_keypairs_v22.py | 4 + tempest/api/compute/limits/test_absolute_limits.py | 10 + .../limits/test_absolute_limits_negative.py | 6 +- .../security_groups/test_security_group_rules.py | 22 +- .../test_security_group_rules_negative.py | 52 +- .../security_groups/test_security_groups.py | 28 +- .../test_security_groups_negative.py | 43 +- .../api/compute/servers/test_attach_interfaces.py | 8 +- .../api/compute/servers/test_availability_zone.py | 2 +- tempest/api/compute/servers/test_create_server.py | 33 +- tempest/api/compute/servers/test_delete_server.py | 17 +- tempest/api/compute/servers/test_device_tagging.py | 24 + tempest/api/compute/servers/test_disk_config.py | 12 +- .../api/compute/servers/test_instance_actions.py | 13 +- .../servers/test_instance_actions_negative.py | 6 +- .../compute/servers/test_list_server_filters.py | 71 ++- tempest/api/compute/servers/test_novnc.py | 8 + .../servers/test_server_addresses_negative.py | 5 +- tempest/api/compute/servers/test_server_group.py | 12 +- .../api/compute/servers/test_server_personality.py | 17 +- tempest/api/compute/servers/test_server_rescue.py | 93 +++- .../compute/servers/test_server_rescue_negative.py | 9 +- tempest/api/compute/servers/test_server_tags.py | 5 + .../api/compute/servers/test_servers_negative.py | 135 +++-- tempest/api/compute/test_extensions.py | 5 +- tempest/api/compute/test_networks.py | 2 + tempest/api/compute/test_quotas.py | 7 +- tempest/api/compute/test_tenant_networks.py | 9 +- tempest/api/compute/volumes/test_attach_volume.py | 48 +- .../compute/volumes/test_attach_volume_negative.py | 15 +- .../api/identity/admin/v2/test_roles_negative.py | 78 ++- tempest/api/identity/admin/v2/test_services.py | 9 +- .../api/identity/admin/v2/test_tenant_negative.py | 42 +- tempest/api/identity/admin/v2/test_tenants.py | 18 +- tempest/api/identity/admin/v2/test_tokens.py | 5 +- .../api/identity/admin/v2/test_tokens_negative.py | 5 + tempest/api/identity/admin/v2/test_users.py | 23 +- .../api/identity/admin/v2/test_users_negative.py | 56 +- .../admin/v3/test_application_credentials.py | 2 + tempest/api/identity/admin/v3/test_credentials.py | 4 + .../identity/admin/v3/test_domain_configuration.py | 13 +- tempest/api/identity/admin/v3/test_domains.py | 11 +- .../api/identity/admin/v3/test_domains_negative.py | 16 +- .../api/identity/admin/v3/test_endpoint_groups.py | 4 + tempest/api/identity/admin/v3/test_endpoints.py | 5 + .../identity/admin/v3/test_endpoints_negative.py | 22 +- tempest/api/identity/admin/v3/test_groups.py | 7 +- tempest/api/identity/admin/v3/test_inherits.py | 8 + .../api/identity/admin/v3/test_list_projects.py | 16 +- tempest/api/identity/admin/v3/test_projects.py | 22 +- .../identity/admin/v3/test_projects_negative.py | 20 +- tempest/api/identity/admin/v3/test_regions.py | 8 +- tempest/api/identity/admin/v3/test_roles.py | 15 + tempest/api/identity/admin/v3/test_tokens.py | 13 +- tempest/api/identity/admin/v3/test_trusts.py | 31 +- .../api/identity/admin/v3/test_users_negative.py | 5 +- tempest/api/identity/v2/test_api_discovery.py | 5 +- tempest/api/identity/v2/test_extension.py | 3 +- tempest/api/identity/v2/test_tenants.py | 2 + tempest/api/identity/v2/test_tokens.py | 3 +- tempest/api/identity/v2/test_users.py | 2 + tempest/api/identity/v3/test_api_discovery.py | 15 +- .../identity/v3/test_application_credentials.py | 5 + tempest/api/identity/v3/test_domains.py | 2 + tempest/api/identity/v3/test_projects.py | 2 + tempest/api/identity/v3/test_tokens.py | 24 +- tempest/api/identity/v3/test_users.py | 4 + tempest/api/image/v1/test_image_members.py | 4 + .../api/image/v1/test_image_members_negative.py | 12 +- tempest/api/image/v1/test_images.py | 19 +- tempest/api/image/v1/test_images_negative.py | 16 +- tempest/api/image/v2/admin/test_images.py | 3 + tempest/api/image/v2/test_images.py | 120 ++++- tempest/api/image/v2/test_images_member.py | 7 + .../api/image/v2/test_images_member_negative.py | 3 + .../v2/test_images_metadefs_namespace_objects.py | 3 + .../test_images_metadefs_namespace_properties.py | 1 + .../v2/test_images_metadefs_namespace_tags.py | 2 + .../image/v2/test_images_metadefs_namespaces.py | 1 + .../v2/test_images_metadefs_resource_types.py | 1 + .../api/image/v2/test_images_metadefs_schema.py | 22 +- tempest/api/image/v2/test_images_negative.py | 18 +- tempest/api/image/v2/test_images_tags.py | 2 + tempest/api/image/v2/test_images_tags_negative.py | 5 +- tempest/api/image/v2/test_versions.py | 2 + .../api/network/admin/test_dhcp_agent_scheduler.py | 4 + .../admin/test_external_network_extension.py | 23 +- .../admin/test_external_networks_negative.py | 9 +- .../admin/test_floating_ips_admin_actions.py | 18 +- .../api/network/admin/test_metering_extensions.py | 11 +- tempest/api/network/admin/test_negative_quotas.py | 7 +- tempest/api/network/admin/test_ports.py | 13 + tempest/api/network/admin/test_quotas.py | 6 +- tempest/api/network/admin/test_routers.py | 53 +- tempest/api/network/admin/test_routers_dvr.py | 4 +- tempest/api/network/admin/test_routers_negative.py | 2 + tempest/api/network/test_allowed_address_pair.py | 14 +- tempest/api/network/test_dhcp_ipv6.py | 84 ++- tempest/api/network/test_extensions.py | 2 +- tempest/api/network/test_extra_dhcp_options.py | 4 +- tempest/api/network/test_floating_ips.py | 23 +- tempest/api/network/test_floating_ips_negative.py | 3 + tempest/api/network/test_networks.py | 43 +- tempest/api/network/test_networks_negative.py | 11 + tempest/api/network/test_ports.py | 61 ++- tempest/api/network/test_routers.py | 41 +- tempest/api/network/test_routers_negative.py | 10 + tempest/api/network/test_security_groups.py | 16 +- .../api/network/test_security_groups_negative.py | 28 +- tempest/api/network/test_service_providers.py | 2 + tempest/api/network/test_subnetpools_extensions.py | 1 + tempest/api/network/test_tags.py | 4 +- tempest/api/object_storage/test_account_bulk.py | 44 +- tempest/api/object_storage/test_account_quotas.py | 2 + .../test_account_services_negative.py | 3 +- tempest/api/object_storage/test_container_acl.py | 5 +- .../object_storage/test_container_acl_negative.py | 17 +- .../api/object_storage/test_container_services.py | 51 +- .../test_container_services_negative.py | 26 +- .../api/object_storage/test_container_staticweb.py | 5 + tempest/api/object_storage/test_container_sync.py | 2 +- tempest/api/object_storage/test_healthcheck.py | 2 + tempest/api/object_storage/test_object_formpost.py | 2 + .../test_object_formpost_negative.py | 3 + tempest/api/object_storage/test_object_slo.py | 13 +- tempest/api/object_storage/test_object_temp_url.py | 6 + .../test_object_temp_url_negative.py | 3 +- tempest/api/object_storage/test_object_version.py | 11 + tempest/api/volume/admin/test_groups.py | 10 + tempest/api/volume/admin/test_snapshot_manage.py | 1 + tempest/api/volume/admin/test_user_messages.py | 4 + tempest/api/volume/admin/test_volume_hosts.py | 3 + tempest/api/volume/admin/test_volume_manage.py | 2 + tempest/api/volume/admin/test_volume_pools.py | 4 + tempest/api/volume/admin/test_volume_quotas.py | 12 +- .../volume/admin/test_volume_quotas_negative.py | 4 + tempest/api/volume/admin/test_volume_retype.py | 23 + tempest/api/volume/admin/test_volume_services.py | 6 +- .../volume/admin/test_volume_services_negative.py | 6 + .../admin/test_volume_snapshot_quotas_negative.py | 3 + .../api/volume/admin/test_volume_type_access.py | 3 + tempest/api/volume/admin/test_volume_types.py | 1 - .../volume/admin/test_volume_types_extra_specs.py | 7 +- .../api/volume/admin/test_volume_types_negative.py | 9 +- tempest/api/volume/admin/test_volumes_actions.py | 17 +- tempest/api/volume/admin/test_volumes_backup.py | 4 - tempest/api/volume/admin/test_volumes_list.py | 3 +- tempest/api/volume/base.py | 7 +- tempest/api/volume/test_availability_zone.py | 2 +- tempest/api/volume/test_extensions.py | 3 +- tempest/api/volume/test_image_metadata.py | 2 + tempest/api/volume/test_snapshot_metadata.py | 5 +- tempest/api/volume/test_versions.py | 6 +- tempest/api/volume/test_volume_absolute_limits.py | 3 +- tempest/api/volume/test_volumes_actions.py | 14 +- tempest/api/volume/test_volumes_backup.py | 29 +- tempest/api/volume/test_volumes_get.py | 9 +- tempest/api/volume/test_volumes_list.py | 49 +- tempest/api/volume/test_volumes_negative.py | 58 +- tempest/api/volume/test_volumes_snapshots.py | 24 +- tempest/api/volume/test_volumes_snapshots_list.py | 41 +- .../api/volume/test_volumes_snapshots_negative.py | 11 +- tempest/cmd/account_generator.py | 63 +-- tempest/cmd/cleanup.py | 20 +- tempest/cmd/cleanup_service.py | 39 +- tempest/cmd/subunit_describe_calls.py | 28 +- tempest/cmd/verify_tempest_config.py | 8 +- tempest/common/custom_matchers.py | 18 +- tempest/config.py | 39 +- .../response/compute/v2_1/parameter_types.py | 7 + .../api_schema/response/compute/v2_59/__init__.py | 0 .../response/compute/v2_59/migrations.py | 36 ++ tempest/lib/api_schema/response/volume/backups.py | 229 ++++++++ .../api_schema/response/volume/encryption_types.py | 95 ++++ .../api_schema/response/volume/group_snapshots.py | 106 ++++ .../lib/api_schema/response/volume/group_types.py | 134 +++++ tempest/lib/api_schema/response/volume/groups.py | 164 ++++++ tempest/lib/api_schema/response/volume/limits.py | 55 ++ .../api_schema/response/volume/scheduler_stats.py | 79 +++ .../lib/api_schema/response/volume/snapshots.py | 198 +++++++ tempest/lib/api_schema/response/volume/volumes.py | 368 +++++++++++++ tempest/lib/common/dynamic_creds.py | 6 +- tempest/lib/common/rest_client.py | 49 +- tempest/lib/common/thread.py | 4 - tempest/lib/common/utils/linux/remote_client.py | 6 +- tempest/lib/services/compute/migrations_client.py | 5 +- tempest/lib/services/compute/servers_client.py | 17 +- tempest/lib/services/image/v2/images_client.py | 86 +++ tempest/lib/services/network/quotas_client.py | 26 + tempest/lib/services/volume/v3/backups_client.py | 21 +- .../services/volume/v3/encryption_types_client.py | 11 +- .../services/volume/v3/group_snapshots_client.py | 13 +- .../lib/services/volume/v3/group_types_client.py | 24 +- tempest/lib/services/volume/v3/groups_client.py | 18 +- tempest/lib/services/volume/v3/limits_client.py | 3 +- .../services/volume/v3/scheduler_stats_client.py | 5 +- tempest/lib/services/volume/v3/snapshots_client.py | 35 +- tempest/lib/services/volume/v3/versions_client.py | 5 +- tempest/lib/services/volume/v3/volumes_client.py | 63 ++- tempest/manager.py | 2 +- tempest/scenario/manager.py | 363 +++++++++---- tempest/scenario/test_encrypted_cinder_volumes.py | 2 +- .../scenario/test_minbw_allocation_placement.py | 7 +- tempest/scenario/test_minimum_basic.py | 2 +- .../scenario/test_network_advanced_server_ops.py | 2 +- tempest/scenario/test_network_basic_ops.py | 18 +- tempest/scenario/test_network_v6.py | 2 +- tempest/scenario/test_security_groups_basic_ops.py | 8 +- tempest/scenario/test_snapshot_pattern.py | 10 + tempest/scenario/test_volume_boot_pattern.py | 3 +- .../calls.subunit | Bin .../calls_subunit_expected.json | 87 +++ .../lib/common/utils/linux/test_remote_client.py | 2 +- .../services/compute/test_base_compute_client.py | 2 +- .../lib/services/compute/test_servers_client.py | 2 +- .../lib/services/compute/test_services_client.py | 2 +- .../lib/services/identity/v2/test_token_client.py | 3 +- .../lib/services/identity/v3/test_token_client.py | 3 +- .../lib/services/image/v2/test_images_client.py | 19 +- .../services/network/test_base_network_client.py | 2 +- .../lib/services/network/test_quotas_client.py | 12 +- .../network/test_security_group_rules_client.py | 2 +- .../network/test_security_groups_client.py | 2 +- .../services/object_storage/test_object_client.py | 2 +- .../lib/services/volume/v3/test_backups_client.py | 3 +- .../volume/v3/test_encryption_types_client.py | 4 +- .../services/volume/v3/test_group_types_client.py | 4 +- .../volume/v3/test_scheduler_stats_client.py | 12 +- .../lib/services/volume/v3/test_services_client.py | 2 +- .../volume/v3/test_snapshot_manage_client.py | 2 +- .../services/volume/v3/test_transfers_client.py | 2 +- .../volume/v3/test_volume_manage_client.py | 2 +- .../lib/services/volume/v3/test_volumes_client.py | 4 - test-requirements.txt | 4 +- tools/generate-tempest-plugins-list.py | 4 +- tools/generate-tempest-plugins-list.sh | 4 +- .../tempest-integrated-gate-compute-blacklist.txt | 6 + ...st-integrated-gate-object-storage-blacklist.txt | 7 +- .../tempest-integrated-gate-storage-blacklist.txt | 7 +- tools/tempest-plugin-sanity.sh | 6 +- tox.ini | 12 +- 351 files changed, 5774 insertions(+), 1596 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index bf38faed2..d8738f08c 100644 --- a/requirements.txt +++ b/requirements.txt @@ -6 +6 @@ cliff!=2.9.0,>=2.8.0 # Apache-2.0 -jsonschema>=2.6.0 # MIT +jsonschema>=3.2.0 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index a50905fb7..17fa9f108 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -4,2 +4 @@ -hacking>=3.0,<3.1.0;python_version>='3.5' # Apache-2.0 -mock>=2.0.0 # BSD +hacking>=3.0.1,<3.1.0;python_version>='3.5' # Apache-2.0 @@ -7,0 +7 @@ oslotest>=3.2.0 # Apache-2.0 +pycodestyle>=2.0.0,<2.6.0 # MIT

1 0

swift 2.26.0 (victoria)
by no-reply＠openstack.org 18 Sep '20

18 Sep '20

We joyfully announce the release of: swift 2.26.0: OpenStack Object Storage This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/swift Download the package from: https://tarballs.openstack.org/swift/ Please report issues through: https://bugs.launchpad.net/swift/+bugs For more details, please see below. 2.26.0 ^^^^^^ New Features ************ * Extend concurrent reads to erasure coded policies. Previously, the options "concurrent_gets" and "concurrency_timeout" only applied to replicated policies. * Add a new "concurrent_ec_extra_requests" option to allow the proxy to make some extra backend requests immediately. The proxy will respond as soon as there are enough responses available to reconstruct. * The concurrent read options ("concurrent_gets", "concurrency_timeout", and "concurrent_ec_extra_requests") may now be configured per storage-policy. * Replication servers can now handle all request methods. This allows ssync to work with a separate replication network. * All background daemons now use the replication network. This allows better isolation between external, client-facing traffic and internal, background traffic. Note that during a rolling upgrade, replication servers may respond with "405 Method Not Allowed". To avoid this, operators should remove the config option "replication_server = true" from their replication servers; this will allow them to handle all request methods before upgrading. * S3 API improvements: * Fixed some SignatureDoesNotMatch errors when using the AWS .NET SDK. * Add basic read support for object tagging. This improves compatibility with AWS CLI version 2. Write support is not yet implemented, so the tag set will always be empty. * CompleteMultipartUpload requests may now be safely retried. * Improved quota-exceeded error messages. * Improved logging and statsd metrics. Be aware that this will cause an increase in the proxy-logging statsd metrics emited for S3 responses. However, this should more accurately reflect the state of the system. * S3 requests are now less demanding on the container layer. * Servers now open one listen socket per worker, ensuring each worker serves roughly the same number of concurrent connections. * Server workers may now be gracefully terminated via "SIGHUP" or "SIGUSR1". The parent process will then spawn a fresh worker. * Allow proxy-logging middlewares to be configured more independently. * Improve performance when increasing partition power. Known Issues ************ * In a rolling upgrade from liberasurecode 1.5.0 or earlier to 1.6.0 or later, object-servers may quarantine newly-written data, leading to availability issues or even data loss. See bug 1886088 for more information, including how to determine whether you are affected. Several mitigations are available to operators: * If proxy and object layers can be upgraded independently and proxies can be upgraded quickly: 1. Stop and disable the object-reconstructor before upgrading. This ensures no upgraded object server starts writing new fragments that old object servers would quarantine. 2. Upgrade liberasurecode on all object servers. Object servers can now read both old and new fragments. 3. Upgrade liberasurecode on all proxy servers. Newly-written data will now use new fragments. Note that not-yet-upgraded proxies will not be able to read these newly-written fragments but will instead respond "500 Internal Server Error". 4. After upgrading, re-enable and restart the object- reconstructor. * If your users can tolerate it, consider a read-only rolling upgrade. Before upgrading, enable the read-only middleware cluster-wide to prevent new writes during the upgrade. Additionally, stop and disable the object-reconstructor as above. Upgrade normally, then disable the read-only middleware and re- enable and restart the object-reconstructor. * Avoid upgrading liberasurecode until swift and liberasurecode better-support a rolling upgrade. Swift remains compatible with liberasurecode 1.5.0 and earlier. Note: Ubuntu 18.04 and RDO's CentOS 7 repos package liberasurecode 1.5.0, while Ubuntu 20.04 and RDO's CentOS 8 repos currently package liberasurecode 1.6.0 or 1.6.1. Take care when upgrading major distro versions! Upgrade Notes ************* * **If your cluster has encryption enabled and is still running Swift under Python 2**, we recommend upgrading Swift *before* transitioning to Python 3. Otherwise, new writes to objects with non-ASCII characters in their paths may result in corrupted downloads when read from a proxy-server still running old swift on Python 2. See bug 1888037 for more information. Note that new tags including a fix for the bug are planned for all maintained stable branches; upgrading to any one of those should be sufficient to ensure a smooth upgrade to the latest Swift. * The above bug was caused by a difference in string types that resulted in ambiguity when decrypting. To prevent the ambiguity for new data, set "meta_version_to_write = 3" in your keymaster configuration *after* upgrading all proxy servers. If upgrading from Swift 2.20.0 or Swift 2.19.1 or earlier, set "meta_version_to_write = 1" in your keymaster configuration *prior* to upgrading. See the provided "keymaster.conf-sample" for more information about this setting. * **If your cluster is configured with a separate replication network**, note that background daemons will switch to using this network for all traffic. If your account, container, or object replication servers are configured with "replication_server = true", these daemons may log a flood of "405 Method Not Allowed" messages during a rolling upgrade. To avoid this, comment out the option and restart replication servers before upgrading. Bug Fixes ********* * Python 3 bug fixes: * Fixed an error when reading encrypted data that was written while running Python 2 for a path that includes non-ASCII characters. * Object expiration respects the "expiring_objects_container_divisor" config option. * "fallocate_reserve" may be specified as a percentage in more places. * The ETag-quoting middleware no longer raises TypeErrors. * Sharding improvements: * Prevent object updates from auto-creating shard containers. This ensures more consistent listings for sharded containers during rebalances. * Deleted shard containers are no longer considered root containers. This prevents unnecessary sharding audit failures and allows the deleted shard database to actually be unlinked. * "swift-container-info" now summarizes shard range information. Pass "-v"/"--verbose" if you want to see all of them. * Improved container-sharder stat reporting to reduce load on root container databases. * Don't inject shard ranges when user quits. * During rebalances, clients should no longer get 404s for data that exists but whose replicas are overloaded. * Improved cache management for account and container responses. * Allow operators to pass either raw or URL-quoted paths to "swift- get-nodes". Notably, this allows "swift-get-nodes" to work with the reserved namespace used for object versioning. * Container read ACLs now work with object versioning. This only allows access to the most-recent version via an unversioned URL. * Improved how containers reclaim deleted rows to reduce locking and object update throughput. * Large object reads log fewer client disconnects. * Allow ratelimit to be placed multiple times in a proxy pipeline, such as both before s3api and auth (to handle swift requests without needing to make an auth decision) and after (to limit S3 requests). * Shuffle object-updater work. This somewhat reduces the impact a single overloaded database has on other containers' listings. * Fix a proxy-server error when retrieving erasure coded data when there are durable fragments but not enough to reconstruct. * Fix an error in the proxy server when finalizing data. * Various other minor bug fixes and improvements. Changes in swift 2.25.0..2.26.0 ------------------------------- d6c6ab764 Authors/ChangeLog for 2.26.0 a8d214626 xlo: Drain error responses f8a9a6e11 s3api: Make quota-exceeded errors more obvious ae8a89f04 gate: Make rolling upgrade job work with either 60xx or 62xx ports d5625abf6 proxy: Include thread_locals when spawning _fragment_GET_request 754defc39 Client should retry when there's just one 404 and a bunch of errors 6e9e41d9b Remove some useless swob.Request attr setting b7b45eadc ec: Close down some unused responses more quickly f043aedec Make all concurrent_get options per-policy 8ea227a0e Suppress CryptographyDeprecationWarnings ee693265f swift-init: Don't expose misleading commands eefe35755 docs: Clean up some formatting around using servers_per_port 8f60e0a26 Extend concurrent_gets to EC GET requests 3f5e712be wsgi: Allow workers to gracefully exit 452db14a0 Bind a new socket per-worker 829a0d9a7 [goal] Migrate testing to ubuntu focal 08eacf68d Fix a typo in the explanatory note 5b2c846c6 Start to decouple Object GET path 2a6dfae2f Allow direct and internal clients to use the replication network 7d429318d py3: Work with proper native string paths in crypto meta 3a6e85d9e s3api: Allow lower-cased region name for AWS .NET SDK compatibility e10af5d26 docs: Clarify request_time in storage logs 770cc287a Treat add/remove/rebalance during part-power increase as error cb67f9472 container-sharding: Stable overlap order 9eb81f6e6 Allow replication servers to handle all request methods 0dbf3d0a9 Actually interpolate error message 67e3830ab swift-container-info: Show shard ranges summary fa5bad279 Decouple proxy_server tests 1c9154764 Use latest pip in gate jobs 314347a3c Update SAIO & docker image to use 62xx ports c31e30ec2 docs: Improve replication-network remakerings 5bd95cf2b probe tests: Get rid of `server` arg for device_dir() and storage_dir() 907942eb4 Stop syncing empty suffixes list a5ec38326 Add a reminder to configure firewall at storage nodes 36bd21488 Address a sharder/replicator race a4cf508a3 Identify deleted shards as shards b2efd185c s3api: Use swift.backend_path to proxy-log s3api requests 45be775eb Get rid of memcache attr on proxy-server app 7753eff66 py3: Stop munging RAW_PATH_INFO 2e001431f s3api: Don't do naive HEAD request for auth 5c087ad7b Fix up curl commands when object name has unix dir characters 02548717a s3api: Allow CompleteMultipartUpload requests to be retried e91a3d73a Remove lxml deprecated methods 5eb677fe5 Bump up probe test timeout 51a587ed8 Use ensure-pip role f5c25d7c6 Clean up some proxy tests 7be7cc966 proxy: Stop killing memcache entries on 5xx responses 9bc8c8258 py3: Fix expirer container generation 6afefe1ad s3api: Add basic support for ?tagging requests 2ffe598f4 proxy-logging: Be able to configure log_route 79811df34 Use ini_file to update timeout instead of crudini 2854eddb4 py3: (Better) fix percentages in configs e4586fdcd memcached: Plumb logger into MemcacheRing 1dfa41dad swift-get-nodes: Allow users to specify either quoted or unquoted paths 1b6c8f7fd Remove etag-quoter from 2.25.0 release notes 11dd0da29 tests: Bump up timeout for unit and in-process func tests fc731198a Quiet eventlet exceptions in test ce4c0fb14 Don't auto-create shard containers 3d105b623 Switch to newer openstackdocstheme and reno versions 019bade19 Remove <py3.5 dependencies from requirements.txt 738514c16 docs: s3api doesn't support tagging 20c6bdb71 Enable s3api and staticweb tests across all func tests 99947150d func tests: work with etag-quoter on by default ede9dad9f Better functest quarantine cleanup cedec8c5e Latch shard-stat reporting 60f052f69 dsvm: Run service-user tests under keystoneauth 984b57a87 tests: Skip s3api copy-version test when OV not enabled 3aa4e3ec8 Remove swift-dsvm-functional-py3 job 650272eac Imported Translations from Zanata fa768b434 Simplify wsgify() a2feefb04 dsvm: Use devstack's s3api "service" 5034916c1 Skip tests when only changing README.rst, CONTRIBUTING.rst, etc. 78cce72f8 Ussuri contrib docs community goal 73f0b143d dsvm: Run service-user tests under tempauth 63b16a368 dsvm: Run domain_remap tests with tempauth a8e03f42e versioning: Have versioning symlinks make pre-auth requests to reserved container 63e02fa9f Test for Versioned Object If-Match bb9b0326f swift-dsvm: Enable s3api aab45880f Breakup reclaim into batches f25705ee1 Add py38 package metadata 67598b3a4 Bump up timeouts for DSVM and probe test jobs 1db11df4f ratelimit: Allow multiple placements f4bc95150 fix s3api functional tests 1358d3732 versioning: Use CONTAINER_LISTING_LIMIT when doing container listings 971023e4c replication: Allow databases_per_second to be a float 0fd23ee54 Fix pep8 job dee98a74d updater: Shuffle suffixes so we don't keep hitting the same failures f57d4cfa7 object-updater: Ignore ENOENT when trying to unlink stale pending files fe74ec048 py27: Suppress UnicodeWarnings in ShardRange setters 630c9ef80 probe tests: Work when fronted by a TLS terminator 0f2da2aee Use local py2 upper-constraints 695295007 Switch to new grenade job name cb37d3acd docs: Clean up mount options 4c8512afb Use separate name for HeaderKeyDict var vs list of response headers 1af995f0e s3api: Check whether versioning is enabled more f3c19459c Imported Translations from Zanata 69b8165cd obj: _finalize_durable may succeed even when data file is missing a9c6ad7e2 Add stable/ussuri upgrade job 9581254e6 swift-dsvm: Enable more middlewares dbeaabe54 Add experimental job to upgrade from master e84d531b9 py3: Make etag-quoter work 63e6c91ab Make rolling-upgrade job non-voting 72a617752 func tests: Allow test_etag_quoter to be run multiple times d0f0d1d4f sharding: Add probe test that exercises swift-manage-shard-ranges c7fe823c0 Update master for stable/ussuri eae27412d sharding: Don't inject shard ranges when user says quit 3061ec803 relinker: Improve performance by limiting I/O Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 172 ++-- AUTHORS | 4 + CHANGELOG | 135 +++- CONTRIBUTING.rst | 10 + REVIEW_GUIDELINES.rst | 2 +- api-ref/source/conf.py | 44 +- bin/swift-container-info | 4 + bin/swift-get-nodes | 2 + bin/swift-object-relinker | 2 + .../install/storage-install-ubuntu-debian.rst | 4 +- etc/account-server.conf-sample | 14 +- etc/container-server.conf-sample | 14 +- etc/keymaster.conf-sample | 27 + etc/object-server.conf-sample | 14 +- etc/proxy-server.conf-sample | 52 +- etc/rsyncd.conf-sample | 16 +- examples/apache2/account-server.template | 2 +- examples/apache2/container-server.template | 2 +- examples/apache2/object-server.template | 2 +- lower-constraints.txt | 5 - py2-constraints.txt | 72 ++ .../notes/2_26_0_release-6548eadcba544f72.yaml | 216 +++++ releasenotes/source/conf.py | 14 +- releasenotes/source/index.rst | 2 + .../locale/en_GB/LC_MESSAGES/releasenotes.po | 882 ++++++++++++++++++++- releasenotes/source/ussuri.rst | 6 + requirements.txt | 11 +- roles/additional-keystone-users/tasks/main.yaml | 134 ++++ roles/additional-tempauth-users/tasks/main.yaml | 47 ++ roles/dsvm-additional-middlewares/tasks/main.yaml | 70 ++ setup.cfg | 1 + swift/__init__.py | 7 + swift/account/reaper.py | 10 +- swift/cli/info.py | 65 +- swift/cli/manage_shard_ranges.py | 4 +- swift/cli/recon.py | 34 +- swift/cli/relinker.py | 181 ++++- swift/cli/ringbuilder.py | 8 +- swift/common/base_storage_server.py | 29 +- swift/common/db.py | 53 +- swift/common/db_replicator.py | 2 +- swift/common/direct_client.py | 33 +- swift/common/internal_client.py | 7 +- swift/common/manager.py | 98 ++- swift/common/memcached.py | 21 +- swift/common/middleware/crypto/keymaster.py | 61 +- swift/common/middleware/dlo.py | 7 +- swift/common/middleware/etag_quoter.py | 10 +- swift/common/middleware/list_endpoints.py | 6 +- swift/common/middleware/memcache.py | 5 +- swift/common/middleware/proxy_logging.py | 15 +- swift/common/middleware/ratelimit.py | 4 + .../middleware/s3api/controllers/__init__.py | 3 + .../middleware/s3api/controllers/multi_upload.py | 91 ++- swift/common/middleware/s3api/controllers/obj.py | 24 +- .../common/middleware/s3api/controllers/tagging.py | 57 ++ swift/common/middleware/s3api/etree.py | 2 +- swift/common/middleware/s3api/s3api.py | 2 + swift/common/middleware/s3api/s3request.py | 69 +- swift/common/middleware/s3api/utils.py | 4 - swift/common/middleware/slo.py | 14 +- swift/common/middleware/symlink.py | 31 +- swift/common/middleware/tempauth.py | 2 - .../versioned_writes/object_versioning.py | 6 +- swift/common/request_helpers.py | 30 +- swift/common/ring/builder.py | 16 +- swift/common/swob.py | 27 +- swift/common/utils.py | 127 ++- swift/common/wsgi.py | 394 ++++----- swift/container/backend.py | 118 ++- swift/container/reconciler.py | 19 +- swift/container/server.py | 44 +- swift/container/sharder.py | 43 +- swift/container/sync.py | 7 +- swift/locale/de/LC_MESSAGES/swift.po | 9 +- swift/obj/diskfile.py | 21 +- swift/obj/expirer.py | 3 +- swift/obj/replicator.py | 3 + swift/obj/updater.py | 13 +- swift/proxy/controllers/account.py | 2 +- swift/proxy/controllers/base.py | 129 +-- swift/proxy/controllers/container.py | 2 +- swift/proxy/controllers/obj.py | 823 ++++++++++++++++--- swift/proxy/server.py | 58 +- test/__init__.py | 6 + test/functional/__init__.py | 29 +- test/functional/s3api/__init__.py | 19 +- test/functional/s3api/s3_test_client.py | 40 +- test/functional/s3api/test_acl.py | 6 +- test/functional/s3api/test_bucket.py | 16 +- test/functional/s3api/test_multi_delete.py | 2 +- test/functional/s3api/test_multi_upload.py | 66 +- test/functional/s3api/test_object.py | 10 +- test/functional/s3api/test_service.py | 2 +- test/functional/s3api/test_versioning.py | 4 +- test/functional/swift_test_client.py | 3 + test/functional/test_object.py | 21 +- test/functional/test_object_versioning.py | 110 ++- test/functional/test_slo.py | 31 +- test/functional/test_symlink.py | 79 +- test/functional/test_versioned_writes.py | 11 +- test/probe/__init__.py | 8 + test/probe/brain.py | 3 +- test/probe/common.py | 18 +- .../probe/test_account_get_fake_responses_match.py | 12 +- test/probe/test_container_failures.py | 31 +- test/probe/test_object_async_update.py | 7 +- test/probe/test_object_failures.py | 4 +- test/probe/test_object_handoff.py | 19 +- test/probe/test_object_metadata_replication.py | 3 +- test/probe/test_object_partpower_increase.py | 4 +- test/probe/test_reconstructor_rebuild.py | 6 +- test/probe/test_reconstructor_revert.py | 20 +- test/probe/test_sharder.py | 96 ++- test/probe/test_signals.py | 72 +- test/sample.conf | 5 + test/unit/__init__.py | 51 +- test/unit/account/test_backend.py | 66 ++ test/unit/account/test_reaper.py | 6 +- test/unit/account/test_server.py | 11 +- test/unit/cli/test_info.py | 241 ++++-- test/unit/cli/test_manage_shard_ranges.py | 21 +- test/unit/cli/test_relinker.py | 218 ++++- test/unit/cli/test_ringbuilder.py | 6 +- .../common/middleware/crypto/test_keymaster.py | 227 +++++- test/unit/common/middleware/s3api/__init__.py | 12 + .../common/middleware/s3api/test_multi_upload.py | 185 ++++- test/unit/common/middleware/s3api/test_obj.py | 135 +++- test/unit/common/middleware/s3api/test_s3_acl.py | 16 +- test/unit/common/middleware/s3api/test_s3api.py | 29 +- .../unit/common/middleware/s3api/test_s3request.py | 4 +- .../common/middleware/s3api/test_versioning.py | 2 +- test/unit/common/middleware/test_copy.py | 4 +- test/unit/common/middleware/test_dlo.py | 29 +- test/unit/common/middleware/test_proxy_logging.py | 35 +- test/unit/common/middleware/test_ratelimit.py | 114 +-- test/unit/common/middleware/test_slo.py | 17 +- test/unit/common/middleware/test_symlink.py | 50 ++ test/unit/common/ring/test_builder.py | 2 +- test/unit/common/test_base_storage_server.py | 25 +- test/unit/common/test_db.py | 4 +- test/unit/common/test_db_replicator.py | 6 +- test/unit/common/test_direct_client.py | 55 ++ test/unit/common/test_internal_client.py | 73 +- test/unit/common/test_memcached.py | 79 +- test/unit/common/test_request_helpers.py | 13 + test/unit/common/test_swob.py | 16 + test/unit/common/test_utils.py | 177 ++++- test/unit/common/test_wsgi.py | 311 ++++---- test/unit/container/test_backend.py | 314 +++++++- test/unit/container/test_reconciler.py | 1 + test/unit/container/test_server.py | 119 ++- test/unit/container/test_sharder.py | 51 +- test/unit/obj/test_diskfile.py | 86 ++ test/unit/obj/test_replicator.py | 37 +- test/unit/obj/test_server.py | 24 +- test/unit/proxy/controllers/test_account.py | 48 +- test/unit/proxy/controllers/test_base.py | 206 ++++- test/unit/proxy/controllers/test_container.py | 53 +- test/unit/proxy/controllers/test_obj.py | 684 +++++++++++++++- test/unit/proxy/test_server.py | 382 +++++---- test/unit/proxy/test_sysmeta.py | 82 +- tools/playbooks/common/install_dependencies.yaml | 8 +- tools/playbooks/dsvm/pre.yaml | 3 + .../multinode_setup/configure_loopback.yaml | 2 +- tools/playbooks/multinode_setup/make_rings.yaml | 10 + .../templates/make_multinode_rings.j2 | 40 +- .../saio_single_node_setup/setup_saio.yaml | 12 +- tox.ini | 37 +- 204 files changed, 8389 insertions(+), 2342 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index d4c994af2..223fc617b 100644 --- a/requirements.txt +++ b/requirements.txt @@ -5 +4,0 @@ -dnspython>=1.15.0;python_version=='2.7' # http://www.dnspython.org/LICENSE @@ -16 +15,9 @@ cryptography>=2.0.2 # BSD/Apache-2.0 -ipaddress>=1.0.16;python_version<'3.3' # PSF + +# For python 2.7, the following requirements are needed; they are not +# included since the requirments-check check will fail otherwise since +# global requirements do not support these anymore. +# Fortunately, these packages come in as dependencies from others and +# thus the py27 jobs still work. +# +# dnspython>=1.15.0;python_version=='2.7' # http://www.dnspython.org/LICENSE +# ipaddress>=1.0.16;python_version<'3.3' # PSF

1 0

ansible-role-lunasa-hsm 1.0.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are psyched to announce the release of: ansible-role-lunasa-hsm 1.0.0: ansible-role-lunasa-hsm - Ansible role to configure Lunasa HSM clients. This is the first release of ansible-role-lunasa-hsm. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/ansible-role-lunasa-hsm Download the package from: https://tarballs.openstack.org/ansible-role-lunasa-hsm/ Please report issues through: https://storyboard.openstack.org/#!/project/1180 For more details, please see below. Changes in ansible-role-lunasa-hsm a0dbe15912d09351448d42f680904a15f0943659..1.0.0 ---------------------------------------------------------------------------------- 1f79d94 Ignore mode warning for unarchive 99dc088 Fix certificate file name b4eaaeb Add support for High Availability ce3e955 Small cleanups 235bfe9 Use underscore instead of dash d131542 Set ha_slot fact ad60739 Use ansible expect task instead of expect command 7e61087 Add zuul jobs c33a9a7 Remove WIP hieradata tasks 4049e84 Fix yaml syntax errors a29bb30 Check for errors in lunacm commands 95fb95b Remove zuul config

1 0

python-troveclient 3.3.2 (ussuri)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are satisfied to announce the release of: python-troveclient 3.3.2: Client library for OpenStack DBaaS API This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/python-troveclient Download the package from: https://pypi.org/project/python-troveclient Please report issues through: https://bugs.launchpad.net/python-troveclient/+bugs For more details, please see below. Changes in python-troveclient 3.3.1..3.3.2 ------------------------------------------ 1feaf36 Support region in CLI 8dd8a69 Update TOX/UPPER_CONSTRAINTS_FILE for stable/ussuri a85223e Update .gitreview for stable/ussuri Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + tox.ini | 6 +++--- troveclient/osc/plugin.py | 3 ++- 3 files changed, 6 insertions(+), 4 deletions(-)

1 0

tripleo-heat-templates 12.6.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We exuberantly announce the release of: tripleo-heat-templates 12.6.0: Heat templates for deploying OpenStack with OpenStack. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/tripleo-heat-templates Download the package from: https://tarballs.openstack.org/tripleo-heat-templates/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. 12.6.0 ^^^^^^ New Features ************ * Adds a new ContainerNovaLibvirtPidsLimit parameter in order to set the PIDs limit for nova_libvirt container. Defaults to 65536, set to 0 for unlimited. * This change updates the multiple-nics and multiple-nics-vlans templates so that an external bridge is created if either the role uses the External network or the "external_bridge" tag is set in the role definition. This is done instead of checking if the role name is "Controller". This change also assigns the "external_bridge" tag to the Controller as well as the Compute roles so that both roles can access the Neutron external bridge for floating IPs or SNAT by default so that OVN can use DVR. * The following parameters were added to support configuration of gnocchi nfs backend. * GnocchiNfsEnabled * GnocchiNfsShare * GnocchiNfsOptions * The MariaDB tuning parameter for Innodb_buffer_pool_size can now be set via a new TripleO Heat Template parameter 'MySQLInnodbBufferPoolSize'. By default this is undefined. * The following parameters are now role specific: * IronicConductorGroup * IronicCleaningNetwork * IronicProvisioningNetwork * IronicRescuingNetwork This allow operators to deploy the Baremetal service in a configuration with multiple conductor groups utilizing different networks for provisioning, cleaning and rescuing per conductor group or conductor. * The nova-ironic setting for 'max_concurrent_builds' can now be set via the use of a new TripleO Heat templates parameter 'IronicMaxConcurrentBuilds'. It is set to the service default of 10 by default in TripleO Heat templates. * Add the NovaImageCacheTTL to the nova compute service. This exposes the remove_unused_original_minimum_age_seconds from nova.conf which controls the time (in seconds) that nova compute should continue caching an image once it is no longer used by and instances on the host. Defaults to 86400 (24hrs) * Floating IP port forwarding is now supported under ML2/OVN. A more detailed explanation can be found in bug 1877447 (https://bugs.launchpad.net/neutron/+bug/1877447) * Adding support for PowerFlex cinder driver. * Support for PowerStore backend cinder driver. Supports both iSCSI and FC protocols and support deploying one or multiple cinder PowerStore storage backends. * When SwiftRawDisks is set, try to mount the disks using uuids instead of paths. This makes mounts more stable, eg. if a kernel gets updates and device orders are changed. Upgrade Notes ************* * The "external_bridge" tag is now used for the Compute node. An external network bridge is required on the compute nodes in order to host floating IPs when using DVR. OVN deploys with DVR by default. * The CIDR for the StorageNFS network in the sample network_data_ganesha.yaml file has been modified to provide more usable IPs for the corresponding Neutron overcloud StorageNFS provider network. Since the CIDR of an existing network cannot be modified, deployments with existing StorageNFS networks should be sure to customize the StorageNFS network definition to use the same CIDR as that in their existing deployment in order to avoid a heat resource failure when updating or upgrading the overcloud. * Operators utilizing the "firstboot/os-net-config-mappings.yaml" should remove the resource registry entry. The template was replaced by a module in ansible. The data format and parameter "NetConfigDataLookup" is still used. * The deprecated``ManilaCephFSDataPoolPGNum`` and "ManilaCephFSMetadataPoolPGNum" parameters have been removed. As with the other Ceph pools, use the "CephPoolDefaultPgNum" parameter for the default value, or "CephPools" to override pg_num for specific pools. Deprecation Notes ***************** * The firstboot template "firstboot/os-net-config-mappings.yaml" that was used to create an os-net-config mapping file has been deprecated and replaced by an ansible module. The parameter "NetConfigDataLookup" remains with no data format change for compatibility. * As the fast forward upgrade workflow to skip multiple releases now relies on the very same upgrade_tasks, there is no need to mantain the fast_forward_upgrade_tasks, as well as any of its references. * Resource OS::TripleO::Services::CinderBackendDellEMCVxFlexOS is deprecated. Use the new resource OS::TripleO::Services::CinderBackendDellEMCPowerFlex. Bug Fixes ********* * Designate producers will no longer be deployed in standalone mode and produce duplicates as they are now configured to coordinate via redis. * Fixed issue in the sample network_data_ganesha.yaml file where the IPv4 allocation range for the StorageNFS network occupies almost the whole of its CIDR. If network_data_ganesha.yaml is used without modification in a customer deployment then there are too few IPs left over in its CIDR for use by the corresponding overcloud Neutron StorageNFS provider network for its overcloud DHCP service. (See bug: #1889682 (https://bugs.launchpad.net/tripleo/+bug/1889682)) * Previously, HorizonDebug and Debug parameters change the value of horizon::django_debug. However, those parameters didn't set DEBUG log level to horizon logger components. By this change, if those are true, horizon::log_level is set to 'DEBUG'. * Fix Swift ring synchronization to ensure every node on the overcloud has the same copy to start with. This is especially required when replacing nodes or using manually modifed rings. Changes in tripleo-heat-templates 12.5.0..12.6.0 ------------------------------------------------ a584099b9 Make sure we noop the Rabbitmq_ providers 4b0cc36ef Make sure we noop the Mysql_ providers 87b365afd Fix Flakes and lower-constraints errors 884be2060 Replace deprecated nova::compute::ironic::max_concurrent_builds 7b9199de9 os-net-config-mappings move out of firsboot 89e35393d Add parameter and CI config to enable Ceph OTW encryption 168961d66 Add environment to enable nova on undercloud ab25f7d4d Remove ipa-client install task from undercloud-tls playbook dc959f17c Make sure IPA has the right ACI 88ca5928e Remove CI env for net-config-multinode-os-net-config.yaml 83d1cb585 pcs commands on host: redis bundle 4e76e1fb7 pcs commands on host: ovn dbs f37f21f31 pcs commands on host: cinder backup/volume 0e03ba791 Add the NovaImageCacheTTL to the nova compute service 13cc41a23 Fix Swift ring file synchronization issue 62a22a831 Add post_upgrade_task and remove puppet-ceph pkg a1bee3913 pcs commands on host: manila-share fdf873861 Mount libpod container volume into collectd container cd6aae1ec reno only - ironic role specific parameters 846cb94bc Add new ansible tag for network configuration 29bc3de01 pcs commands on host: rabbitmq da3d5e805 pcs commands on host: mysql a11622359 pcs commands on host: haproxy bundle 05d943107 Expose Innodb_buffer_pool_size 2035b88f5 DCN: use FQDN in glance endpoint with internal TLS 8c358e2e7 Fix nCipher (aka thales) ansible role name 500ba0479 Remove Etcd from DCN roles that don't need it cdcadbadc Ironic role_specific parameters efe179190 Expose max_concurrent_builds as a Heat parameter ccee58a60 Remove usage of RetryFilter b81035d00 Default to storage_dashboard, when set, for the CephDashboard service 4e8a05833 Use appropriate allocation pools for StorageNFS e4fd78880 Re-enable driver agent for scenario 10 c7ec72627 Use container_file_t for Cinder*NfsMountOptions by default 9d71882a4 Set a higher PIDs limit for nova_libvirt container f860ca59a dpdk_telemetry is not used 1890ab0fb Expose mistral::rpc_response_timeout as Heat parameter 4d8c87a09 Modify how libvirt related containers use SELinux 6206d1959 Use UUID for mounted SwiftRawDisks 7010c60ee Revert "Disable Designate service for scenario 03" 164fac75a minor update: only migrate HA VIP away when needed 798010fab Remove deprecated Manila PGNum parameters 6d5ecfcdf Remove all UIConfig endpoints 4ac4524b1 Fix wrong description about cinder db purge a9be4c6a3 [FFWD Ceph] Fix ceph post_upgrade_tasks for osd options ec6305988 enable ovs_stats and ovs_events plugins for neutron ovs dpdk agent 94997223b Fix endpoint map tls - zaqar wss port bc5b6133f Create external bridge on Compute nodes by default for OVN with DVR dcfc98d23 Fix pcs restart in composable HA 973b056d9 Remove rrdtool from collectdExtraPLugins e892d4004 Fix up ovn-dbs update tasks a26638224 Create Container configs with a new module 1e1ea11be Create container config scripts with a new module bdca0a03f Set keystone::cache parameters 40fa5244c [ovn]: Enable port forwarding in neutron service plugins 67dfa755e Revert "Workaround rhel8,0 iptables bug causing neutron_ovs_agent to restart continuously" 20131fd66 Do not hard-code vars_from a9e95b26b [ovn] Don't add conntrack entries for Geneve dcab84386 Add redis password for designate coordination 357a3eeb2 undercloud_upgrade: tear-down keepalived 1547fc8e3 Fix delegation with FreeIPA cleanup 2f460accb pcmk_remote FFU support for Instance HA c4a270eec Run external_deploy_tasks per step for each role 52fdbaf9b Remove YAQL queries for RabbitCookie 7858b573e Deprecating VxFlex OS Cinder Config b5dad0cf1 Switch host sshd configuration to ansible d8e5ccb8c Add PermitRootLogin option in sshd_config before leapp. 2e76336c4 Remove remaining Skydive references b3ec03464 Reset sriov_numvfs to 0 before leapp upgrade dc171d249 Remove all broken references to ./puppet/services 19402ff04 Consolidate the barbican-api client configurations f217eccc7 Align kernel args for system upgrade using leapp ba471ee46 Fix HA resource restart when no replicas are running e1d2ece78 Use sensible defaults for novnc TLS minimum versions and ciphers 6c33feb30 Add CephAnsibleRepo warning to make this validation more flexible b3fd483c2 Use tripleo_network_config 08415cb54 Support for PowerFlex Cinder Backend ead85251e Add new Luna HSM parameter for Barbican 0f5923d1d Update Nova VNC puppet variables 0f5488940 Rolling certificate update for HA services 8ca2b598c Add openvswitch special treatment to update too. 56e2702f4 Support for PowerStore Cinder Backend 7bcdd2448 Revamp how etcd's cert and key are handled in containers 0a27ab493 Small improvement on the default gateway(s) detection 2b7181352 Do not manage healthcheck for nova-compute anymore 812aa726e Set 'DEBUG' to horizon::log_level if HorizonDebug or Debug is true 9b894ecb6 Remove redundant file management for /run/redis a6bbb4941 Add support for Gnocchi NFS Backend ac50d6483 Unset keystone::public_endpoint 5e553da93 Update, avoid task skipping by directly importing step file. 7ff794663 Add dashboard_protocol variable when internal_tls is enabled 8783ec9c4 Remove ffwd-upgrade leftovers from THT. 52831ef10 Memcached collectd plugin uses host URI instead of IP address. ea62bcf15 Stop using a conditional for role tasks 7a46a91e7 Remove strategy comment d5820dba4 Generated passthrough_whitelist shall use all the user_configs fields bf279de03 Attempt to remove octavia tls proxy service only present 86d5adf3a Add missing config_files kolla directives adef06e43 Use parameters in new neutron::server::notifications::nova class 6c3c8b41d Avoid failing on deleted file b91a1a09c Ensure redis_tls_proxy starts after all redis instances c8d4429e9 Remove usage of ineffective parameter in nova::api class 3353d8cbd Cleanup parameters for keystone::bootstrap a6f0a8eae Enable Dashboard on scenario004 4697bc2a5 Fix typos Diffstat (except docs and test files) ------------------------------------- ci/common/net-config-multinode-os-net-config.yaml | 271 ----- ci/environments/multinode-containers.yaml | 4 +- ci/environments/scenario001-standalone.yaml | 7 +- ci/environments/scenario003-standalone.yaml | 18 +- ci/environments/scenario004-standalone.yaml | 6 +- .../scenario007-multinode-containers.yaml | 4 +- ci/environments/scenario010-standalone.yaml | 1 - common/deploy-steps-tasks-step-1.yaml | 29 +- common/deploy-steps.j2 | 276 +---- common/services/role.role.j2.yaml | 20 - .../nova_statedir_ownership.py | 68 +- .../pacemaker_mutex_restart_bundle.sh | 90 ++ .../pacemaker_resource_lock.sh | 237 ++++ .../pacemaker_restart_bundle.sh | 13 +- container_config_scripts/wait-port-and-run.sh | 18 + deployment/README.rst | 30 - deployment/aodh/aodh-api-container-puppet.yaml | 46 - .../aodh/aodh-evaluator-container-puppet.yaml | 18 - .../aodh/aodh-listener-container-puppet.yaml | 18 - .../aodh/aodh-notifier-container-puppet.yaml | 18 - .../barbican/barbican-api-container-puppet.yaml | 79 +- deployment/barbican/barbican-client-puppet.yaml | 15 +- .../ceilometer-agent-central-container-puppet.yaml | 18 - .../ceilometer-agent-compute-container-puppet.yaml | 18 - .../ceilometer-agent-ipmi-container-puppet.yaml | 18 - ...ometer-agent-notification-container-puppet.yaml | 18 - deployment/ceph-ansible/ceph-base.yaml | 70 +- deployment/ceph-ansible/ceph-mds.yaml | 3 +- deployment/ceph-ansible/ceph-mgr.yaml | 1 + deployment/ceph-ansible/ceph-mon.yaml | 3 +- deployment/ceph-ansible/ceph-osd.yaml | 52 +- deployment/ceph-ansible/ceph-rgw.yaml | 3 +- .../certs/certmonger-user-baremetal-puppet.yaml | 9 + deployment/cinder/cinder-api-container-puppet.yaml | 55 +- .../cinder/cinder-backend-dellemc-powerflex.yaml | 149 +++ .../cinder-backend-dellemc-powerstore-puppet.yaml | 105 ++ .../cinder/cinder-backend-netapp-puppet.yaml | 2 +- .../cinder/cinder-backup-container-puppet.yaml | 11 +- .../cinder/cinder-backup-pacemaker-puppet.yaml | 107 +- deployment/cinder/cinder-base.yaml | 18 +- .../cinder/cinder-common-container-puppet.yaml | 4 +- .../cinder/cinder-scheduler-container-puppet.yaml | 27 +- .../cinder/cinder-volume-container-puppet.yaml | 46 +- .../cinder/cinder-volume-pacemaker-puppet.yaml | 101 +- deployment/containers-common.yaml | 9 + deployment/database/mysql-base.yaml | 11 + deployment/database/mysql-container-puppet.yaml | 23 - deployment/database/mysql-pacemaker-puppet.yaml | 71 +- deployment/database/redis-container-puppet.yaml | 3 - deployment/database/redis-pacemaker-puppet.yaml | 128 +- .../cinder-backend-dellemc-vxflexos-puppet.yaml | 27 + .../sahara/sahara-api-container-puppet.yaml | 30 - .../sahara/sahara-engine-container-puppet.yaml | 18 - deployment/etcd/etcd-container-puppet.yaml | 55 +- .../designate-producer-container-puppet.yaml | 5 + deployment/glance/glance-api-container-puppet.yaml | 28 - .../glance/glance-api-edge-container-puppet.yaml | 22 +- .../gnocchi/gnocchi-api-container-puppet.yaml | 128 +- .../gnocchi/gnocchi-metricd-container-puppet.yaml | 34 +- .../gnocchi/gnocchi-statsd-container-puppet.yaml | 36 +- .../haproxy/haproxy-edge-container-puppet.yaml | 22 +- deployment/haproxy/haproxy-pacemaker-puppet.yaml | 71 +- deployment/heat/heat-api-cfn-container-puppet.yaml | 18 - .../heat/heat-api-cloudwatch-disabled-puppet.yaml | 24 - deployment/heat/heat-api-container-puppet.yaml | 30 - deployment/heat/heat-engine-container-puppet.yaml | 18 - deployment/horizon/horizon-container-puppet.yaml | 12 + deployment/ipa/ipaservices-baremetal-ansible.yaml | 2 +- deployment/ironic/ironic-api-container-puppet.yaml | 36 - .../ironic/ironic-conductor-container-puppet.yaml | 59 +- .../kernel-boot-params-baremetal-ansible.yaml | 20 + deployment/keystone/keystone-container-puppet.yaml | 61 +- deployment/manila/manila-api-container-puppet.yaml | 32 - .../manila/manila-scheduler-container-puppet.yaml | 20 - .../manila/manila-share-container-puppet.yaml | 20 - .../manila/manila-share-pacemaker-puppet.yaml | 101 +- .../memcached/memcached-container-puppet.yaml | 21 +- deployment/metrics/collectd-container-puppet.yaml | 19 +- deployment/mistral/mistral-base.yaml | 6 +- .../neutron/derive_pci_passthrough_whitelist.py | 11 +- .../neutron/neutron-api-container-puppet.yaml | 51 +- .../neutron/neutron-dhcp-container-puppet.yaml | 18 - .../neutron/neutron-l3-container-puppet.yaml | 18 - .../neutron/neutron-metadata-container-puppet.yaml | 18 - .../neutron-ovn-dpdk-config-container-puppet.yaml | 6 - .../neutron-ovs-agent-container-puppet.yaml | 22 - .../neutron-ovs-dpdk-agent-container-puppet.yaml | 7 +- .../neutron-sriov-agent-container-puppet.yaml | 31 +- deployment/nova/nova-api-container-puppet.yaml | 159 --- deployment/nova/nova-compute-container-puppet.yaml | 42 +- .../nova/nova-conductor-container-puppet.yaml | 18 - deployment/nova/nova-ironic-container-puppet.yaml | 33 +- deployment/nova/nova-libvirt-container-puppet.yaml | 38 +- .../nova/nova-scheduler-container-puppet.yaml | 18 - .../nova/nova-vnc-proxy-container-puppet.yaml | 37 +- deployment/nova/novajoin-container-puppet.yaml | 10 + .../octavia/octavia-api-container-puppet.yaml | 36 +- .../ovn/ovn-controller-container-puppet.yaml | 16 + deployment/ovn/ovn-dbs-pacemaker-puppet.yaml | 51 +- .../pacemaker/pacemaker-baremetal-puppet.yaml | 4 +- .../pacemaker-remote-baremetal-puppet.yaml | 60 + deployment/podman/podman-baremetal-ansible.yaml | 2 - deployment/rabbitmq/rabbitmq-container-puppet.yaml | 16 +- ...rabbitmq-messaging-notify-container-puppet.yaml | 15 +- ...rabbitmq-messaging-notify-pacemaker-puppet.yaml | 94 +- .../rabbitmq-messaging-pacemaker-puppet.yaml | 94 +- .../rabbitmq-messaging-rpc-container-puppet.yaml | 15 +- .../rabbitmq-messaging-rpc-pacemaker-puppet.yaml | 104 +- deployment/sshd/sshd-baremetal-ansible.yaml | 105 ++ deployment/swift/swift-proxy-container-puppet.yaml | 22 - .../swift/swift-ringbuilder-container-puppet.yaml | 2 +- .../swift/swift-storage-container-puppet.yaml | 42 +- deployment/tls/undercloud-tls.yaml | 4 - .../tripleo-packages-baremetal-puppet.yaml | 272 +---- deployment/undercloud/undercloud-upgrade.yaml | 163 +-- environments/barbican-backend-pkcs11-lunasa.yaml | 29 +- environments/cavium-liquidio.yaml | 2 +- environments/ceph-ansible/ceph-ansible.yaml | 7 + environments/cinder-dellemc-powerflex-config.yaml | 35 + environments/cinder-dellemc-powerstore-config.yaml | 28 + environments/cinder-dellemc-vxflexos-config.yaml | 4 + environments/cinder-netapp-config.yaml | 2 +- environments/computealt.yaml | 2 +- environments/lifecycle/ffwd-upgrade-prepare.yaml | 1 - environments/low-memory-usage.yaml | 2 - environments/ovs-hw-offload.yaml | 2 +- .../services-baremetal/neutron-ovn-dvr-ha.yaml | 4 +- .../services-baremetal/neutron-ovn-ha.yaml | 2 +- environments/services-baremetal/neutron-sriov.yaml | 2 +- environments/services/ironic.yaml | 1 - environments/services/neutron-mlnx-agent.yaml | 2 +- environments/services/neutron-ovn-dvr-ha.yaml | 2 +- environments/services/neutron-ovn-ha.yaml | 2 +- environments/services/neutron-ovn-sriov.yaml | 2 +- environments/services/neutron-ovn-standalone.yaml | 2 +- environments/services/neutron-sriov.yaml | 2 +- environments/ssl/no-tls-endpoints-public-ip.yaml | 9 +- environments/ssl/tls-endpoints-public-dns.yaml | 11 +- environments/ssl/tls-endpoints-public-ip.yaml | 11 +- environments/ssl/tls-everywhere-endpoints-dns.yaml | 11 +- environments/storage-environment.yaml | 2 +- environments/storage/cinder-netapp-config.yaml | 2 +- environments/storage/cinder-nfs.yaml | 2 +- environments/undercloud-enable-nova.yaml | 33 + environments/undercloud.yaml | 27 +- firstboot/os-net-config-mappings.yaml | 141 +-- lower-constraints.txt | 8 +- .../config/multiple-nics-vlans/role.role.j2.yaml | 4 +- network/config/multiple-nics/role.role.j2.yaml | 6 +- network/endpoints/build_endpoint_map.py | 2 +- network/endpoints/endpoint_data.yaml | 40 - network/endpoints/endpoint_map.yaml | 1250 ++------------------ network/scripts/run-os-net-config.sh | 4 - network/service_net_map.j2.yaml | 4 +- network_data_ganesha.yaml | 50 +- overcloud-resource-registry-puppet.j2.yaml | 13 +- overcloud.j2.yaml | 35 + plan-samples/plan-environment-derived-params.yaml | 6 +- ...ainerNovaLibvirtPidsLimit-cdad2166b6c0195f.yaml | 6 + ...ignate-redis-coordination-b4afdcc8855cc0ca.yaml | 4 + ...dge-by-default-on-compute-f3ff6bf46ab80640.yaml | 15 + ...e-for-StorageNFS-net.yaml-bd77be924e8b7056.yaml | 20 + .../gnocchi-nfs-backend-90febc9f87e7df08.yaml | 9 + .../horizon_logger_debug-cd70c45c1b695e4b.yaml | 8 + .../innodb-tuning-param-e71d2fd727c450ec.yaml | 6 + ...ductor-group-and-networks-9c5c409253ebe3c8.yaml | 14 + ...ova-max_concurrent_builds-f900d84f35704452.yaml | 6 + .../nova_image_cache_ttl-824f241363b9dd4e.yaml | 8 + ...-mappings-move-to-ansible-940a48711870ac58.yaml | 14 + .../ovn-port-forwarding-1c954c1c57e136d0.yaml | 6 + .../notes/powerflex-driver-abd8e372280c44e7.yaml | 3 + .../notes/powerstore-driver-e528e372280c44e6.yaml | 6 + ...ila-ceph-pgnum-parameters-b7bb9c95e30467d5.yaml | 7 + .../notes/remove_ffwd_tasks-d1ab630d96a66a59.yaml | 6 + .../swift-fix-ring-sync-7bf3ddbb1ea1e342.yaml | 6 + .../swift-mount-by-uuid-7744fe7696db4b85.yaml | 6 + ...vxflexos-deprecate-driver-cd38e372280c44e6.yaml | 5 + roles/Controller.yaml | 5 + roles/ControllerNoCeph.yaml | 2 + roles/ControllerNovaStandalone.yaml | 2 + roles/ControllerSriov.yaml | 2 - roles/ControllerStorageDashboard.yaml | 2 + roles/ControllerStorageNfs.yaml | 2 + roles/DistributedCompute.yaml | 1 - roles/DistributedComputeHCI.yaml | 2 +- roles/DistributedComputeHCIScaleOut.yaml | 3 +- roles/DistributedComputeScaleOut.yaml | 3 +- roles/NetworkerSriov.yaml | 1 - roles/Standalone.yaml | 2 + roles_data.yaml | 5 + sample-env-generator/ssl.yaml | 38 +- sample-env-generator/standalone.yaml | 2 +- sample-env-generator/storage.yaml | 1 + sample-env-generator/undercloud-minion.yaml | 2 +- test-requirements.txt | 2 +- tools/render-ansible-tasks.py | 3 +- tools/yaml-validate.py | 35 +- tox.ini | 2 +- validation-scripts/all-nodes.sh | 2 +- 201 files changed, 2569 insertions(+), 4598 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 31a7e4d0b..e11f7e2c1 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -4 +4 @@ -hacking>=1.1.0,<1.2.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0

1 0

python-troveclient 3.0.1 (train)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are ecstatic to announce the release of: python-troveclient 3.0.1: Client library for OpenStack DBaaS API This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/python-troveclient Download the package from: https://pypi.org/project/python-troveclient Please report issues through: https://bugs.launchpad.net/python-troveclient/+bugs For more details, please see below. Changes in python-troveclient 3.0.0..3.0.1 ------------------------------------------ 564edb7 Support region in CLI fee2df6 Update TOX/UPPER_CONSTRAINTS_FILE for stable/train b4b0e7a Update .gitreview for stable/train Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + tox.ini | 6 +++--- troveclient/osc/plugin.py | 3 ++- 3 files changed, 6 insertions(+), 4 deletions(-)

1 0

tripleo-validations 12.5.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are gleeful to announce the release of: tripleo-validations 12.5.0: A collection of Ansible playbooks to detect and report potential issues during TripleO deployments This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/tripleo-validations Download the package from: https://tarballs.openstack.org/tripleo-validations/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. Changes in tripleo-validations 12.4.0..12.5.0 --------------------------------------------- 9ed7ce4 Revert "Remove objects migrated to validations-common" c899d97 Remove objects migrated to validations-common cbb3375 Revert "Change path for validation Ansible files" 928fcb0 Fix lower-constraints errors 75ceae1 Updated playbook metadata for package-version 5678d7d Use importlib to take place of imp module ea550f8 Change path for validation Ansible files 9a20e17 Add validation to check status of ipa server 8a1a8b4 New validation: Ensure sVirt is active 1c03c9f New validation: ensure we have access to the right package version b47e1ad Clarify error message for Nova notification settings ee19a57 Refactor vif plugging validations e83ae79 Add os-cloud support for tripleo-ansible-inventory script 7c0481c Add new Upgrades validation groups. ec0465e Allows to use custom role name for validations 9645db1 Corrected work directory for validate-selinux 1a4991d Updated "overcloud" to "allovercloud" group 5887cf0 Add new dependency for the tests: lxml 9b6c8cf Correct role name in generated playbook 3561628 Fix neutron_sanity_check for ML2/OVS overcloud 6c19d1b Make Get OSD stat percentage compatible with jq < 1.5 2fd1c92 Ensures script is executable 6521f1b Add a validation to check the local. 0f7389f Add tripleo-validation.py as script in setup.cfg Diffstat (except docs and test files) ------------------------------------- bindep.txt | 7 ++ groups.yaml | 40 ++++++++ lower-constraints.txt | 11 ++- molecule-requirements.txt | 1 + playbooks/ceph-dependencies-installed.yaml | 4 +- playbooks/check-ftype.yaml | 2 +- playbooks/container-status.yaml | 2 +- playbooks/controller-token.yaml | 4 +- playbooks/controller-ulimits.yaml | 2 +- playbooks/dns.yaml | 2 +- playbooks/haproxy.yaml | 2 +- playbooks/healthcheck-service-status.yaml | 2 +- playbooks/mysql-open-files-limit.yaml | 4 +- playbooks/neutron-sanity-check.yaml | 13 +-- playbooks/no-op.yaml | 2 +- playbooks/nova-event-callback.yaml | 2 +- playbooks/nova-svirt.yaml | 13 +++ playbooks/ntp.yaml | 2 +- playbooks/ovs-dpdk-pmd-cpus-check.yaml | 2 +- playbooks/pacemaker-status.yaml | 2 +- playbooks/package-version.yaml | 21 ++++ playbooks/rabbitmq-limits.yaml | 2 +- playbooks/repos.yaml | 2 +- playbooks/service-status.yaml | 2 +- playbooks/stonith-exists.yaml | 2 +- playbooks/system_encoding.yaml | 13 +++ playbooks/tls-everywhere-post-deployment.yaml | 2 +- playbooks/validate-selinux.yaml | 2 +- role-addition.yml | 18 +++- roles/ceph/tasks/ceph-health.yaml | 4 +- roles/neutron_sanity_check/defaults/main.yml | 3 + roles/neutron_sanity_check/tasks/main.yml | 69 +++++++------ roles/node_health/tasks/main.yml | 4 +- roles/nova_event_callback/tasks/main.yml | 35 ++++--- roles/nova_svirt/defaults/main.yml | 21 ++++ roles/nova_svirt/molecule/default/Dockerfile | 37 +++++++ roles/nova_svirt/molecule/default/converge.yml | 47 +++++++++ roles/nova_svirt/molecule/default/molecule.yml | 48 +++++++++ roles/nova_svirt/molecule/default/prepare.yml | 60 ++++++++++++ roles/nova_svirt/tasks/main.yml | 14 +++ roles/nova_svirt/tasks/validate.yml | 28 ++++++ .../tasks/openshift-nw-requirements.yaml | 2 +- roles/openstack_endpoints/tasks/main.yml | 2 +- roles/package_version/defaults/main.yaml | 2 + .../package_version/molecule/default/Dockerfile.j2 | 37 +++++++ .../package_version/molecule/default/converge.yml | 58 +++++++++++ .../package_version/molecule/default/molecule.yml | 46 +++++++++ roles/package_version/tasks/compare.yaml | 16 +++ roles/package_version/tasks/main.yaml | 67 +++++++++++++ roles/package_version/vars/centos.yml | 2 + roles/package_version/vars/redhat-8.yml | 6 ++ roles/system_encoding/defaults/main.yml | 24 +++++ roles/system_encoding/molecule/default/Dockerfile | 37 +++++++ .../system_encoding/molecule/default/converge.yml | 47 +++++++++ .../system_encoding/molecule/default/molecule.yml | 48 +++++++++ roles/system_encoding/tasks/main.yml | 36 +++++++ roles/tls_everywhere/defaults/main.yml | 3 + roles/tls_everywhere/molecule/default/converge.yml | 36 ++++++- roles/tls_everywhere/molecule/default/prepare.yml | 21 ++++ roles/tls_everywhere/tasks/ipa-server-check.yaml | 107 +++++++++++++++++++++ roles/tls_everywhere/vars/main.yml | 1 - scripts/tripleo-ansible-inventory | 60 ++++++++---- scripts/tripleo-validation.py | 0 setup.cfg | 1 + test-requirements.txt | 4 + zuul.d/molecule.yaml | 33 ++++++- 72 files changed, 1173 insertions(+), 119 deletions(-) Requirements updates -------------------- diff --git a/molecule-requirements.txt b/molecule-requirements.txt index 7c55a28..5b9078d 100644 --- a/molecule-requirements.txt +++ b/molecule-requirements.txt @@ -13,0 +14 @@ selinux # MIT +lxml # BSD diff --git a/test-requirements.txt b/test-requirements.txt index b86e1e7..a0a962c 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -6,0 +7,4 @@ hacking>=3.0,<3.1.0 # Apache-2.0 +# remove this pyflakes from here once you bump the +# hacking to 3.2.0 or above. hacking 3.2.0 takes +# care of pyflakes version compatibilty. +pyflakes>=2.1.1

1 0

tripleo-puppet-elements 12.5.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are excited to announce the release of: tripleo-puppet-elements 12.5.0: Puppet building rules for OpenStack images. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/tripleo-puppet-elements Download the package from: https://tarballs.openstack.org/tripleo-puppet-elements/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. Changes in tripleo-puppet-elements 12.4.0..12.5.0 ------------------------------------------------- 67b7451 Remove puppet-tacker 9e477e5 Remove puppet-vitrage 7c86a2f Remove puppet-trove 7cc43a4 Drop podman-docker from CentOS/RHEL8 d4db347 Add sysstat package to collect sar data by default Diffstat (except docs and test files) ------------------------------------- .../overcloud-base/install.d/package-installs-overcloud-base | 1 + elements/overcloud-base/pkg-map | 11 ++++------- .../environment.d/02-puppet-modules-install-types.sh | 5 +---- elements/puppet-modules/source-repository-puppet-modules | 3 --- 4 files changed, 6 insertions(+), 14 deletions(-)

1 0

os-net-config 12.5.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are satisfied to announce the release of: os-net-config 12.5.0: OpenStack network configuration This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/os-net-config Download the package from: https://tarballs.openstack.org/os-net-config/ Please report issues through: https://bugs.launchpad.net/os-net-config/+bugs For more details, please see below. Changes in os-net-config 12.4.0..12.5.0 --------------------------------------- 878e6bc Add NIC Partitioning support for Mellanox VFs 4c95f7d Avoid openvswitch restarts during re-run Diffstat (except docs and test files) ------------------------------------- os_net_config/cli.py | 8 +++++++- os_net_config/utils.py | 26 +++++++++++++++++++------- 3 files changed, 47 insertions(+), 8 deletions(-)

1 0

tripleo-common 12.6.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are happy to announce the release of: tripleo-common 12.6.0: A common library for TripleO workflows. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/tripleo-common Download the package from: https://tarballs.openstack.org/tripleo-common/ Please report issues through: https://bugs.launchpad.net/tripleo-common/+bugs For more details, please see below. 12.6.0 ^^^^^^ New Features ************ * Added a image yaml for real time kernels support . If you use it, don't forget to also add the rhel-8-for-x86_64-rt-rpms channel. * Added *modify_only_with_source* to the ContainerImagePrepare set that can be used to limit modify container images to a specific image_source as defined in the services to container images mapping. Upgrade Notes ************* * The default container prefix is *openstack-* instead of *centos- binary-* starting with Victoria. Bug Fixes ********* * When using specifying ContainerImagePrepare if a tag is explicitly provided in a set, the tag_from_label functionality will not be run as we use the defined tag for the containers. Previously we would still attempt tag lookups even if we wanted a specific tag. Other Notes *********** * *container-images/tripleo_containers.yaml.j2* is now used to determine what containers are used for which services when running the container image prepare process runs. Changes in tripleo-common 12.5.0..12.6.0 ---------------------------------------- 16ff908a Update container build to better reign in threads 9848dadc Run tripleo-build-containers-ubi-8 on BuildahBuilder code 37793c3c Fix lower-constraints errors d66b6cce Replace cradox with rados 44577e44 Remove the base layers 5115bfaa TCIB: remove leftovers from sahara ed66fb5c Remove unused sensu-client healthcheck e3c3041a Remove Kolla overrides 5c7b2249 Make current user owner of build log files 0c73e4f3 Support basic auth for image registry 9c241569 Add --layers for tcib image layer caching 6f374cf7 Stop configuring install_command in tox. 156b565b Add neutron-mlnx-agent container image 90f6de7a Switch default container prefix to openstack e68c35d2 Remove healthcheck/tacker 1c0af446 Include virt-admin in the nova_libvirt container ecf838cb Remove tripleo-container-image-prepare script c15ef26c Remove sahara-* from list in tripleo_containers.yaml 9df155a3 Remove overcloud_containers.yaml 74799d9b Switch to tripleo_containers.yaml 640b7660 TCIB: move RHEL modules into base image 781233af Fix config parser warning f4d312f1 Add modify_only_with_source 6df053a2 Adding back overcloud-secure as it removes unsafe packages fbd575cb Ensure atomic inventory file rename runs on the same mountpoint fb0ec2ff (backward compatibility) create kolla UIDs/GIDs for TCIB b5668d01 Restore default log path for image prepare 1fd78bbc Make build_timeout configurable a6bbe528 Ensure image files are readable to apache 8e082f45 Ensure tripleo ansible inventory file update is atomic fbb6b57a Remove check for ./puppet/services when filtering services d4f6eb64 Add exponential backoff to ratelimited requests 958936e7 Don't build image upload tasks when dry_run=True 4190729d Change default DHCP timeout for ironic-python-agent 014d985f Stop doing tag_from_label lookup with tag 5602dfd9 Reduce workers for label lookups e2613f03 Correct the inventory generation 975383d4 Revert "Revert "Remove chunk size for url stream"" d3af3141 Handle redirects for blobs better 43aaaaa1 Switch 55-heat-config to async c6e680e1 container-images: add librados2 to gnocchi-base f0abcf03 Add a real-time kernel hardened images for python3 eddc1e60 Generate a play per step for external_deploy_tasks d9811e94 config-download remove role arg from _write_tasks_per_step() 8978eef7 Replace overcloud-secure with overcloud-partition 54933049 Properly collect tasks with or conditional in step file. 642e396f Add update and post update tasks to step generated file. 7c67777f Add a strict option to per role tasks file generation. 9190a3d0 First pass at script cleanup 44af8bc9 Remove translation sections from setup.cfg 8ed87699 tcib: rename kolla_version to tcib_managed Diffstat (except docs and test files) ------------------------------------- babel.cfg | 2 - .../container_image_prepare_defaults.yaml | 4 +- container-images/kolla/barbican-base/sudoers | 1 + container-images/kolla/base/httpd_setup.sh | 2 +- container-images/kolla/base/sudoers | 2 +- container-images/kolla/base/uid_gid_manage.sh | 124 +++ container-images/kolla/horizon/extend_start.sh | 11 +- .../kolla/neutron-base/neutron_sudoers | 2 - container-images/overcloud_containers.yaml | 193 ---- container-images/tcib/base/base.yaml | 14 +- container-images/tcib/base/collectd/collectd.yaml | 11 +- container-images/tcib/base/etcd/etcd.yaml | 2 +- container-images/tcib/base/mariadb/mariadb.yaml | 6 +- .../tcib/base/memcached/memcached.yaml | 3 +- .../tcib/base/os/aodh-base/aodh-base.yaml | 2 +- .../tcib/base/os/barbican-base/barbican-base.yaml | 6 +- .../base/os/ceilometer-base/ceilometer-base.yaml | 2 +- .../ceilometer-central/ceilometer-central.yaml | 4 - .../ceilometer-compute/ceilometer-compute.yaml | 4 - .../ceilometer-ipmi/ceilometer-ipmi.yaml | 4 - .../tcib/base/os/cinder-base/cinder-base.yaml | 6 +- .../base/os/designate-base/designate-base.yaml | 2 +- .../tcib/base/os/glance-api/glance-api.yaml | 6 +- .../tcib/base/os/gnocchi-base/gnocchi-base.yaml | 5 +- .../tcib/base/os/heat-base/heat-base.yaml | 2 +- .../tcib/base/os/ironic-base/ironic-base.yaml | 2 +- .../ironic-conductor/ironic-conductor.yaml | 4 - .../ironic-inspector/ironic-inspector.yaml | 2 +- .../tcib/base/os/keystone/keystone.yaml | 2 +- .../tcib/base/os/manila-base/manila-base.yaml | 2 +- .../tcib/base/os/mistral-base/mistral-base.yaml | 2 +- .../mistral-executor/mistral-executor.yaml | 6 - .../neutron-agent-base/neutron-agent-base.yaml | 4 - .../tcib/base/os/neutron-base/neutron-base.yaml | 2 +- .../neutron-mlnx-agent/neutron-mlnx-agent.yaml | 8 + .../tcib/base/os/nova-base/nova-base.yaml | 2 +- .../nova-compute-ironic/nova-compute-ironic.yaml | 6 +- .../os/nova-base/nova-compute/nova-compute.yaml | 6 +- .../os/nova-base/nova-libvirt/nova-libvirt.yaml | 7 +- .../nova-base/nova-scheduler/nova-scheduler.yaml | 4 - .../tcib/base/os/novajoin-base/novajoin-base.yaml | 2 +- .../tcib/base/os/octavia-base/octavia-base.yaml | 2 +- .../tcib/base/os/swift-base/swift-base.yaml | 2 +- container-images/tcib/base/os/tempest/tempest.yaml | 3 +- .../tcib/base/qdrouterd/qdrouterd.yaml | 2 +- container-images/tcib/base/rabbitmq/rabbitmq.yaml | 2 +- container-images/tcib/base/redis/redis.yaml | 5 +- container-images/tripleo_containers.yaml | 398 ++++---- ...ntainers.yaml.j2 => tripleo_containers.yaml.j2} | 291 ++---- .../tripleo_kolla_config_overrides.conf | 6 - .../tripleo_kolla_template_overrides.j2 | 1049 -------------------- contrib/overcloud_containers.yaml | 1 - healthcheck/sahara-api | 8 - healthcheck/sahara-engine | 14 - healthcheck/sensu-client | 14 - healthcheck/tacker | 8 - ...vercloud-hardened-images-python3-rt-kernel.yaml | 44 + image-yaml/overcloud-hardened-images-python3.yaml | 1 + .../overcloud-hardened-images-uefi-python3.yaml | 3 +- image-yaml/overcloud-hardened-images-uefi.yaml | 3 +- image-yaml/overcloud-hardened-images.yaml | 1 + image-yaml/overcloud-images-python3.yaml | 1 + lower-constraints.txt | 11 +- ...d-real-time-kernel-images-cc790c6d7b6229da.yaml | 4 + ...e-modify_only_with_source-d9be8cc7236e7c94.yaml | 6 + ...ainer-prefix-is-openstack-3cd42220d6cdfed0.yaml | 5 + ...g-lookup-if-tag-specified-2284c45dc0f87693.yaml | 7 + ...e-tripleo-containers-file-0590a59f56fb3907.yaml | 6 + requirements.txt | 5 +- scripts/tripleo-container-image-prepare | 144 --- setup.cfg | 15 - sudoers | 1 - tox.ini | 2 - tripleo_common/actions/ansible.py | 2 +- tripleo_common/constants.py | 13 +- tripleo_common/image/builder/buildah.py | 220 ++-- tripleo_common/image/exception.py | 4 + tripleo_common/image/image_export.py | 4 +- tripleo_common/image/image_uploader.py | 166 +++- tripleo_common/image/kolla_builder.py | 49 +- tripleo_common/inventories.py | 13 +- tripleo_common/inventory.py | 10 +- tripleo_common/templates/deployments.yaml | 32 +- tripleo_common/utils/config.py | 69 +- tripleo_common/utils/plan.py | 2 +- zuul.d/layout.yaml | 2 +- 99 files changed, 2731 insertions(+), 2669 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 67e9f8a7..88f5bbb8 100644 --- a/requirements.txt +++ b/requirements.txt @@ -6 +5,0 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 -Babel!=2.4.0,>=2.3.4 # BSD @@ -25 +24 @@ netifaces>=0.10.4 # MIT -paramiko>=2.0.0 # LGPLv2.1+ +paramiko>=2.7.1 # LGPLv2.1+ @@ -30 +29 @@ keystoneauth1>=3.4.0 # Apache-2.0 -tenacity>=4.4.0 # Apache-2.0 +tenacity>=6.1.0 # Apache-2.0

1 0

puppet-tripleo 13.2.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We contentedly announce the release of: puppet-tripleo 13.2.0: Puppet module for OpenStack TripleO This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/puppet-tripleo Download the package from: https://tarballs.openstack.org/puppet-tripleo/ Please report issues through: https://bugs.launchpad.net/puppet-tripleo/+bugs For more details, please see below. 13.2.0 ^^^^^^ New Features ************ * Add PowerFlex Cinder driver support. * Add new PowerStore backend Cinder driver options. Upgrade Notes ************* * Since Heat API can be given longrunning API requests its backends will become load-balanced based on LRU 'leastconn' algorithm and its sessions will also benefit from the TCP-keepalive feature of HAProxy. Some of the other services with the longrunning requests notion will start using the 'leastconn' LRU LB as well. Deprecation Notes ***************** * Resource tripleo::profile::base::cinder::volume::dellemc_vxflexos will be removed in W-Release. Use the new resource tripleo::profile::base::cinder::volume::dellemc_powerflex._ Bug Fixes ********* * Designate producers will no longer be deployed in standalone mode and produce duplicates as they are now configured to coordinate via redis. Changes in puppet-tripleo 13.1.0..13.2.0 ---------------------------------------- 5fad3411 update puppet-tripleo meta for victoria m3 553b6c93 Change beaker to litmus 39a33dad Resolve conflict during module installation for unit tests 809e7b5a Change branch name for selinux_core puppet module 91222598 fix some docs typos 3130cc88 Replace union to create tcp-check list for redis befc1946 Add unit tests for Mistral manifests 4a52809a Fix tls - zaqar wss default port 97febdc7 Include gnocchi::db explicitly 54080c2d Add unit tests for Zaqar manifests 76731c06 Use openstack_spec_helper from zuul checkout 597336ee add the standalone ipa job template to puppet-tripleo 16a6ba46 HA: ensure scaling up galera does not cause promotion errors d1b78d79 Add support for glance db purge job b333b2b0 Add unit test cases for tripleo::profile::base::swift e644fef4 Use keystone::cache e7cb55d9 Use correct memcached IPs for Swift object-expirer dadf19c6 Add support for aodh-expirer cron job f246b0a9 Avoid direct reference of hieradata 2677d9e2 Fixing incorrect parameter names in Dell EMC Storage Templates ef40cb9f Fix typos, extreamio and xtreamio to xtremio bc27846c Allow not setting hiera cephfs_enable_snapshots 9b9a4682 Add designate coordination backend url 6f98d5ea Cleanup manila netapp deprecated option usage afaa3a54 Deprecating VxFlex OS Volume Config 4143543e Update Puppet requirement to >= 6.0.0 5cb4565c Use pcs 0.9 style authkey/remotes when doing an upgrade 63613d4b Support for PowerFlex Cinder Backend c0216c37 Port jobs from centos7 to centos8 e5fd2c8f Support for PowerStore Cinder Backend 95db8b49 Add certmonger-etcd-refresh.sh script 416e4cd8 Include neutron::server::notification::nova class c1e94479 Make sure python3-novaclient is installed before creating fence_compute c04057b5 Tune haproxy for long running sessions to use leastconn 5717bd79 Use leastcon and socket-level TCP keep-alives for Heat API e868ea5d Switch Octavia API to use source balancing Diffstat (except docs and test files) ------------------------------------- Gemfile | 19 ++- Puppetfile_extras | 5 - files/certmonger-etcd-refresh.sh | 25 +++ lib/puppet/functions/pacemaker_bundle_replicas.rb | 23 +++ manifests/certmonger/ceph_dashboard.pp | 4 +- manifests/certmonger/ceph_grafana.pp | 2 +- manifests/certmonger/ceph_rgw.pp | 4 +- manifests/certmonger/etcd.pp | 8 +- manifests/haproxy.pp | 56 +++++-- manifests/profile/base/aodh/api.pp | 13 +- manifests/profile/base/cinder/volume.pp | 31 +++- .../base/cinder/volume/dellemc_powerflex.pp | 58 +++++++ .../profile/base/cinder/volume/dellemc_powermax.pp | 2 +- .../base/cinder/volume/dellemc_powerstore.pp | 68 ++++++++ manifests/profile/base/cinder/volume/dellemc_sc.pp | 2 +- .../profile/base/cinder/volume/dellemc_vxflexos.pp | 2 + .../profile/base/cinder/volume/dellemc_xtremio.pp | 4 +- manifests/profile/base/designate/producer.pp | 28 +++- manifests/profile/base/glance/api.pp | 11 ++ manifests/profile/base/gnocchi.pp | 1 + manifests/profile/base/keystone.pp | 5 +- manifests/profile/base/manila/share.pp | 4 +- manifests/profile/base/neutron/server.pp | 1 + manifests/profile/base/nova/api.pp | 14 +- manifests/profile/base/pacemaker.pp | 22 ++- manifests/profile/base/pacemaker_remote.pp | 8 + manifests/profile/base/swift.pp | 46 ++++++ manifests/profile/base/swift/proxy.pp | 6 +- ...-object-expirer-memcached-3c1e7037683ee89a.yaml | 8 + manifests/profile/base/swift/storage.pp | 1 + .../profile/pacemaker/database/mysql_bundle.pp | 19 ++- metadata.json | 7 +- ...ignate-redis-coordination-b4afdcc8855cc0ca.yaml | 4 + ...proxy-leastconn-overrides-bdb2068ef794ff1d.yaml | 9 ++ .../notes/powerflex-driver-f728e372280c44e6.yaml | 3 + .../notes/powerstore-driver-e428e372280c44e6.yaml | 3 + ...flexos_driver_deprecation_5568457faab68824.yaml | 5 + spec/acceptance/nodesets/centos-70-x64.yml | 11 -- spec/acceptance/nodesets/default.yml | 11 -- spec/acceptance/nodesets/nodepool-centos7.yml | 10 -- spec/acceptance/nodesets/nodepool-trusty.yml | 10 -- .../acceptance/nodesets/ubuntu-server-1404-x64.yml | 11 -- spec/classes/tripleo_haproxy_spec.rb | 42 +++++ spec/classes/tripleo_profile_base_aodh_api_spec.rb | 33 +++- .../tripleo_profile_base_cinder_powerflex_spec.rb | 58 +++++++ .../tripleo_profile_base_cinder_powerstore_spec.rb | 79 ++++++++++ .../tripleo_profile_base_cinder_volume_spec.rb | 83 ++++++++-- ...ipleo_profile_base_cinder_xtremio_iscsi_spec.rb | 2 +- ...tripleo_profile_base_designate_producer_spec.rb | 8 +- .../tripleo_profile_base_glance_api_spec.rb | 27 ++++ spec/classes/tripleo_profile_base_gnocchi_spec.rb | 4 + spec/classes/tripleo_profile_base_keystone_spec.rb | 12 +- .../tripleo_profile_base_mistral_api_spec.rb | 103 ++++++++++++ .../tripleo_profile_base_mistral_engine_spec.rb | 88 +++++++++++ ...ipleo_profile_base_mistral_event_engine_spec.rb | 88 +++++++++++ .../tripleo_profile_base_mistral_executor_spec.rb | 92 +++++++++++ spec/classes/tripleo_profile_base_mistral_spec.rb | 116 ++++++++++++++ .../tripleo_profile_base_neutron_server_spec.rb | 6 + spec/classes/tripleo_profile_base_nova_api_spec.rb | 35 +++++ .../tripleo_profile_base_swift_proxy_spec.rb | 29 ++-- spec/classes/tripleo_profile_base_swift_spec.rb | 86 ++++++++++ .../tripleo_profile_base_zaqar_authtoken_spec.rb | 70 +++++++++ spec/classes/tripleo_profile_base_zaqar_spec.rb | 174 +++++++++++++++++++++ spec/fixtures/hieradata/default.yaml | 4 +- spec/fixtures/hieradata/step5.yaml | 3 + spec/spec_helper_acceptance.rb | 2 +- zuul.d/layout.yaml | 3 +- 67 files changed, 1679 insertions(+), 152 deletions(-)

1 0

python-tripleoclient 13.6.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are happy to announce the release of: python-tripleoclient 13.6.0: TripleO client This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/python-tripleoclient Download the package from: https://tarballs.openstack.org/python-tripleoclient/ Please report issues through: https://bugs.launchpad.net/tripleo/+bugs For more details, please see below. 13.6.0 ^^^^^^ New Features ************ * The --transport argument has been added to openstack tripleo deploy which allows for specifying the ansible transport to use in the ansible configuration file. Deprecation Notes ***************** * The --standalone argument to the openstack tripleo deploy command is now deprecated. The argument previously had no effect other than allow the tripleo deploy command to not throw an exception, so it can be safely deprecated with no replacement. Bug Fixes ********* * openstack overcloud export now exports user defined password values instead of just always exporting the generated password values. Changes in python-tripleoclient 13.5.0..13.6.0 ---------------------------------------------- 4c7df58d Add --temp-dir to overcloud image build e21e0488 Convert to 'raw' images when uploading e4d2658d Bump ansible-runner to 1.4.5 df0cecfe Update tripleo-validations path to /usr/share/ansible 4c713b18 Allow to pass a static inventory to the validator CLI 30bc8b15 Disable nova by default on undercloud f081d6af Update dependency logic to correctly index parents 65b734ac Add a raise when an image is found without config 4d23eee4 Allow the container build tools to run config-less 8b41b266 Use cli-container-image-prepare.yaml playbook 686ac839 (UX) Improve logging if the ephemeral heat stack wasn't created a3b3aeb9 TCIB: add --rhel-modules argument 5b246e4f Allow usage of duplicated IPs for undercloud config 1fd42a85 Limit ip_version when resolving public_host and admin_host 83677d70 overcloud_cell: fix location of config-download 9dec1b2e overcloud_deploy: move horizon url/rc files before config-download 5e68a6d1 Remove playbook param from tripleo_validator.py ced22140 Use user set password values in overcloud export de494e2a Fix ignored parameters in create_deployment_plan 094bbc65 Don't build image upload tasks when dry_run is True a29dd8ef Simplify error handling in tripleo_deploy 2f90b821 Revert "[ussuri] TCIB: change default namespace to triploeu" 091d8477 Deprecated overcloud container image build (kolla) command c9afd24d Lower ansible poll interval time b407f78a Close session objects in container_image.py c623396f [ussuri] TCIB: change default namespace to triploeu ee7de7c8 Replace assertItemsEqual with assertCountEqual 2873dd4d Cleanup UndercloudHostsEntries ea8db13e Fall back to local upload when there is no glance endpoint a56361f5 Add --transport argument to tripleo deploy a5381b21 Deprecate --standalone argument c8736dff Initially set rc to 0, not 1 4ede7520 Remove the unused _validate_skip_tags function Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 14 +- ...ecate-standalone-argument-57660f3023dc3220.yaml | 7 + ...vercloud-export-passwords-bfa698491601a734.yaml | 4 + .../tripleo-deploy-transport-ccc72043ce0eb776.yaml | 6 + requirements.txt | 2 +- tripleoclient/config/undercloud.py | 2 +- tripleoclient/constants.py | 14 +- tripleoclient/export.py | 38 ++- .../v1/overcloud_deploy/test_overcloud_deploy.py | 20 +- .../v1/overcloud_image/test_overcloud_image.py | 97 ++++-- .../test_tripleo_container_image.py | 4 +- tripleoclient/utils.py | 26 +- tripleoclient/v1/container_image.py | 100 +++--- tripleoclient/v1/overcloud_cell.py | 8 +- tripleoclient/v1/overcloud_deploy.py | 53 ++-- tripleoclient/v1/overcloud_image.py | 46 ++- tripleoclient/v1/overcloud_plan.py | 2 - tripleoclient/v1/overcloud_upgrade.py | 11 - tripleoclient/v1/tripleo_deploy.py | 61 ++-- tripleoclient/v1/tripleo_validator.py | 44 +-- tripleoclient/v1/undercloud_config.py | 29 +- tripleoclient/v2/tripleo_container_image.py | 141 +++++++-- tripleoclient/workflows/plan_management.py | 36 ++- 33 files changed, 936 insertions(+), 375 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 98a26e00..422c937e 100644 --- a/requirements.txt +++ b/requirements.txt @@ -19 +19 @@ cryptography>=2.1 # BSD/Apache-2.0 -ansible-runner>=1.4.4 # Apache 2.0 +ansible-runner>=1.4.5 # Apache 2.0

1 0

python-tackerclient 1.3.0 (victoria)
by no-reply＠openstack.org 17 Sep '20

17 Sep '20

We are tickled pink to announce the release of: python-tackerclient 1.3.0: CLI and Client Library for OpenStack Tacker This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-tackerclient Download the package from: https://pypi.org/project/python-tackerclient Please report issues through: https://bugs.launchpad.net/python-tackerclient/+bugs For more details, please see below. Changes in python-tackerclient 1.2.0..1.3.0 ------------------------------------------- 8ff2f35 Support of RollbackVNF command in openstackclient a0d2ef8 Deleting Network Service(NS) with force option bug fixes 9cd8f11 Implementation Artifacts support in Tacker d7f7ea3 Support of Scale command in openstackclient 64a21f3 Add missing argument in UpdateVNFFG at ../nfvo/vnffg.py 60c268f Support of UpdateVNF command in openstackclient a0c3d1f drop mock from lower-constraints 3f504b1 Replace assertItemsEqual with assertCountEqual 2389e74 Stop to use the __future__ module. Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 1 - setup.cfg | 4 + tackerclient/osc/v1/nfvo/vnffg.py | 5 +- .../samples/scale_vnf_instance_param_sample.json | 3 + .../samples/update_vnf_instance_param_sample.json | 5 + tackerclient/osc/v1/vnflcm/vnflcm.py | 132 +- tackerclient/osc/v1/vnflcm/vnflcm_op_occs.py | 45 + tackerclient/osc/v1/vnfpkgm/vnf_package.py | 59 +- tackerclient/shell.py | 2 - tackerclient/tacker/v1_0/__init__.py | 2 - tackerclient/tacker/v1_0/nfvo/nsd.py | 2 - tackerclient/tacker/v1_0/nfvo/vnffgd.py | 2 - tackerclient/tacker/v1_0/vnfm/vnfd.py | 2 - .../Definitions/etsi_nfv_sol001_common_types.yaml | 202 +++ .../Definitions/etsi_nfv_sol001_vnfd_types.yaml | 1465 ++++++++++++++++++++ .../Definitions/helloworld3_df_simple.yaml | 277 ++++ .../Definitions/helloworld3_top.vnfd.yaml | 32 + .../Definitions/helloworld3_types.yaml | 53 + .../Scripts/install.sh | 3 + .../TOSCA-Metadata/TOSCA.meta | 8 + tackerclient/v1_0/client.py | 43 +- 26 files changed, 2672 insertions(+), 41 deletions(-)

1 0

python-cinderclient 7.2.0 (victoria)
by no-reply＠openstack.org 16 Sep '20

16 Sep '20

We are pleased to announce the release of: python-cinderclient 7.2.0: OpenStack Block Storage API Client Library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/python-cinderclient Download the package from: https://pypi.org/project/python-cinderclient Please report issues through: https://bugs.launchpad.net/python-cinderclient/+bugs For more details, please see below. 7.2.0 ^^^^^ Prelude ******* The Victoria release of the python-cinderclient supports Block Storage API version 2 and Block Storage API version 3 through microversion 3.62. (The maximum microversion of the Block Storage API in the Victoria release is 3.62.) New Features ************ * Added support to set, get, and unset the default volume type for projects with Block Storage API version 3.62 and higher. * Added support to display the "cluster_name" attribute in volume detail output for admin users with Block Storage API version 3.61 and higher. Changes in python-cinderclient 7.1.0..7.2.0 ------------------------------------------- 3600121 Add functional-py38 job 5026a8a Add note for Victoria release 7ee7d37 Add commands for default type overrides 7397f70 Python API in python-cinderclient 9dc1d61 Remove excess whitespace in ignore-path aebb601 Use importlib to take place of imp module 3228111 zuul functional job: drop the custom playbooks f85896a [goal] Migrate python-cinderclient jobs to focal a9e9b76 Add support for Cinder API mv3.61 1dc592a Bump hacking to 3.1.0 8ecbbcd trivial: Drop references to os-testr 37f6a30 use stevedore to load util plugins d6530c4 Add doc linting to pep8 target 4e24fd6 Use unittest.mock instead of third party mock 2d3bceb Clean up some old v1 API references b649d7f Stop to use the __future__ module. 7c82175 Fix pygments style Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 30 +++------- HACKING.rst | 25 +++++---- cinderclient/api_versions.py | 2 +- cinderclient/base.py | 20 +++++++ cinderclient/client.py | 28 ++++++++-- cinderclient/shell.py | 15 +++-- cinderclient/shell_utils.py | 2 - cinderclient/utils.py | 21 ++++--- cinderclient/v2/shell.py | 2 - cinderclient/v3/client.py | 2 + cinderclient/v3/default_types.py | 65 ++++++++++++++++++++++ cinderclient/v3/messages.py | 2 +- cinderclient/v3/shell.py | 53 +++++++++++++++++- cinderclient/v3/volume_backups.py | 4 +- cinderclient/v3/volumes.py | 6 +- lower-constraints.txt | 9 ++- playbooks/post.yaml | 6 -- playbooks/python-cinderclient-functional.yaml | 14 ----- .../project-default-types-727156d1db10a24d.yaml | 6 ++ .../notes/victoria-release-0d9c2b43845c3d9e.yaml | 11 ++++ requirements.txt | 1 + roles/get-os-environment/defaults/main.yaml | 2 - roles/get-os-environment/tasks/main.yaml | 12 ---- test-requirements.txt | 4 +- tools/install_venv_common.py | 2 - tox.ini | 13 ++++- 45 files changed, 421 insertions(+), 161 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index fef5e1e..f6567f4 100644 --- a/requirements.txt +++ b/requirements.txt @@ -11,0 +12 @@ requests!=2.20.0,>=2.14.2 # Apache-2.0 +stevedore>=1.20.0 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index 7aa4096..774f99a 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -6 +6 @@ -hacking>=3.0.1,<3.1.0 # Apache-2.0 +hacking>=3.1.0,<3.2.0 # Apache-2.0 @@ -10 +9,0 @@ fixtures>=3.0.0 # Apache-2.0/BSD -mock>=2.0.0 # BSD @@ -16,0 +16 @@ oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 +doc8>=0.6.0 # Apache-2.0

1 0

python-troveclient 5.1.1 (victoria)
by no-reply＠openstack.org 16 Sep '20

16 Sep '20

We joyfully announce the release of: python-troveclient 5.1.1: Client library for OpenStack DBaaS API This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-troveclient Download the package from: https://pypi.org/project/python-troveclient Please report issues through: https://bugs.launchpad.net/python-troveclient/+bugs For more details, please see below. Changes in python-troveclient 5.1.0..5.1.1 ------------------------------------------ 895f662 Support region in CLI 1704bc4 Update TOX_CONSTRAINTS_FILE for stable/victoria b4b8ddb Update .gitreview for stable/victoria Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + tox.ini | 6 +++--- troveclient/osc/plugin.py | 3 ++- 3 files changed, 6 insertions(+), 4 deletions(-)

1 0

bifrost 8.3.1 (8.3)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are overjoyed to announce the release of: bifrost 8.3.1: Deployment of physical machines using OpenStack Ironic and Ansible This release is part of the 8.3 release series. The source is available from: https://opendev.org/openstack/bifrost Download the package from: https://pypi.org/project/bifrost For more details, please see below. 8.3.1 ^^^^^ Upgrade Notes ************* * Bifrost no longer adds ironic and ironic-inspector endpoints to the public firewalld zone, the operator has to do it explicitly if external access is expected. * Adds the explicit setting of file access permissions to get_url calls in bifrost ansible playbooks to ensure that the contents of "/httpboot" are world-readable independently of which Ansible version is in use. Bug Fixes ********* * Automatically enables DHCP and TFTP services in firewalld on CentOS/RHEL. * Instead of modifying the "public" firewalld zone, creates a new zone "bifrost" and puts the "network_interface" in it. Set "firewalld_internal_zone=public" to revert to the previous behavior. * Makes "/var/lib/ironic" and its images subdirectories readable by nginx. This is required for using the images cache. * Fixes ACL of PXE and iPXE boot files to make sure they are world- readable. * Resolves the issue with ansible versions 2.9.12 and 2.8.14 where implicit setting of file permissions on files downloaded with get_url calls results in overly restrictive permissions. This leads to access denied while attempting to read the contents of "/httpboot" and results in failed deployments. * Adds correct SELinux context for "/tftpboot".

1 0

python-senlinclient 2.1.1 (victoria)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are excited to announce the release of: python-senlinclient 2.1.1: OpenStack Clustering API Client Library This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-senlinclient Download the package from: https://pypi.org/project/python-senlinclient Please report issues through: https://bugs.launchpad.net/python-senlinclient/+bugs For more details, please see below. Changes in python-senlinclient 2.1.0..2.1.1 ------------------------------------------- 921b70f Native Zuul v3 port of the legacy functional job d862e35 [goal] Migrate testing to ubuntu focal 55d9af5 drop mock from lower-constraints 9b80fd3 Stop to use the __future__ module. d63b2b0 Remove translation sections from setup.cfg f0ac999 Update hacking for Python3 Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 33 +++++++--- babel.cfg | 1 - lower-constraints.txt | 16 +++-- .../legacy/senlinclient-dsvm-functional/post.yaml | 67 -------------------- .../legacy/senlinclient-dsvm-functional/run.yaml | 71 ---------------------- requirements.txt | 5 +- senlinclient/common/utils.py | 2 - setup.cfg | 14 ----- test-requirements.txt | 2 +- tox.ini | 4 +- 13 files changed, 41 insertions(+), 246 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index d5719af..05ace59 100644 --- a/requirements.txt +++ b/requirements.txt @@ -5 +4,0 @@ -Babel!=2.4.0,>=2.3.4 # BSD @@ -10 +9 @@ openstacksdk>=0.24.0 # Apache-2.0 -osc-lib>=1.8.0 # Apache-2.0 +osc-lib>=1.11.0 # Apache-2.0 @@ -15 +14 @@ python-heatclient>=1.10.0 # Apache-2.0 -PyYAML>=3.12 # MIT +PyYAML>=3.13 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index c12df3d..c945128 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -7 +7 @@ bandit>=1.1.0 # Apache-2.0 -hacking>=1.1.0,<1.2.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0

1 0

python-masakariclient 6.1.1 (victoria)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We contentedly announce the release of: python-masakariclient 6.1.1: masakariclient module and a CLI tool for masakari This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-masakariclient Download the package from: https://tarballs.openstack.org/python-masakariclient/ Please report issues through: https://bugs.launchpad.net/python-masakariclient/+bugs For more details, please see below. Changes in python-masakariclient 6.1.0..6.1.1 --------------------------------------------- a1a8568 remove future from lower-constraints 41ec312 drop mock from lower-constraints e9debc0 Stop to use the __future__ module. 9a5e107 Switch to newer openstackdocstheme and reno versions 3427e56 Remove translation sections from setup.cfg c25fc53 Fix hacking min version to 3.0.1 Diffstat (except docs and test files) ------------------------------------- babel.cfg | 2 -- lower-constraints.txt | 8 +++----- masakariclient/shell.py | 2 -- releasenotes/source/conf.py | 9 +++++---- setup.cfg | 14 -------------- test-requirements.txt | 8 ++++---- 7 files changed, 16 insertions(+), 35 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 1fc4524..c610d71 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +5 @@ -hacking>=3.0,<3.1.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0 @@ -10 +10 @@ python-subunit>=1.0.0 # Apache-2.0/BSD -openstackdocstheme>=1.18.1 # Apache-2.0 +openstackdocstheme>=2.2.1 # Apache-2.0 @@ -13 +13 @@ requests-mock>=1.2.0 # Apache-2.0 -sphinx!=1.6.6,!=1.6.7,>=1.6.2 # BSD +sphinx>=2.0.0,!=2.1.0 # BSD @@ -19 +19 @@ testtools>=2.2.0 # MIT -reno>=2.5.0 # Apache-2.0 +reno>=3.1.0 # Apache-2.0

1 0

python-keystoneclient 4.1.1 (victoria)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are psyched to announce the release of: python-keystoneclient 4.1.1: Client Library for OpenStack Identity This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-keystoneclient Download the package from: https://pypi.org/project/python-keystoneclient Please report issues through: https://bugs.launchpad.net/python-keystoneclient/+bugs For more details, please see below. Changes in python-keystoneclient 4.1.0..4.1.1 --------------------------------------------- 54f19dc Fix hacking min version to 3.0.1 ee55c04 Use unittest.mock instead of third party mock Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 4 ---- test-requirements.txt | 3 +-- 16 files changed, 16 insertions(+), 20 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 835fd47..418821c 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -5 +5 @@ -hacking>=3.0,<3.1.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0 @@ -12 +11,0 @@ lxml!=3.7.0,>=3.4.1 # BSD -mock>=2.0.0 # BSD

1 0

python-saharaclient 3.2.1 (victoria)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are happy to announce the release of: python-saharaclient 3.2.1: Client library for Sahara API This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-saharaclient Download the package from: https://pypi.org/project/python-saharaclient Please report issues through: https://bugs.launchpad.net/python-saharaclient/+bugs For more details, please see below. Changes in python-saharaclient 3.2.0..3.2.1 ------------------------------------------- a9fee07 [goal] Migrating testing to Ubuntu Focal 9f7323c Remove Babel requirement fc92d66 drop mock from lower-constraints Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 10 ++++------ requirements.txt | 1 - 2 files changed, 4 insertions(+), 7 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 89685ff..b0bcfcf 100644 --- a/requirements.txt +++ b/requirements.txt @@ -7 +6,0 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 -Babel!=2.4.0,>=2.3.4 # BSD

1 0

python-freezerclient 4.0.0 (victoria)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are amped to announce the release of: python-freezerclient 4.0.0: OpenStack Disaster Recovery API Client Library This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-freezerclient Download the package from: https://pypi.org/project/python-freezerclient Please report issues through: https://storyboard.openstack.org/#!/project/openstack/python- freezerclient For more details, please see below. Changes in python-freezerclient 3.1.0..4.0.0 -------------------------------------------- 7f21934 Fix tip error 8c7e59c Add py38 in tox. 0df8a1d Remove keystone v2 related code da8b317 Fix hacking min version to 3.0.1 Diffstat (except docs and test files) ------------------------------------- freezerclient/shell.py | 5 ++--- freezerclient/v1/client.py | 5 +---- freezerclient/v2/client.py | 6 +----- test-requirements.txt | 3 ++- tox.ini | 6 +++--- 8 files changed, 13 insertions(+), 30 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 29b8f4d..4f27e39 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -6 +6 @@ -hacking>=3.0,<3.1.0 # Apache-2.0 +hacking>=3.0.1,<3.1.0 # Apache-2.0 @@ -11,0 +12 @@ astroid==2.1.0 # LGPLv2.1 +isort==4.3.21 #MIT

1 0

openstack-ansible 20.1.6 (train)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We are satisfied to announce the release of: openstack-ansible 20.1.6: Ansible playbooks for deploying OpenStack This release is part of the train stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. Changes in openstack-ansible 20.1.5..20.1.6 ------------------------------------------- f742fc88d Bump SHAs for stable/train Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 4 +- playbooks/defaults/repo_packages/gnocchi.yml | 2 +- playbooks/defaults/repo_packages/nova_consoles.yml | 2 +- .../defaults/repo_packages/openstack_services.yml | 88 +++++++++++----------- 4 files changed, 48 insertions(+), 48 deletions(-)

1 0

openstack-ansible 19.1.5 (stein)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We exuberantly announce the release of: openstack-ansible 19.1.5: Ansible playbooks for deploying OpenStack This release is part of the stein stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. Changes in openstack-ansible 19.1.4..19.1.5 ------------------------------------------- cba17460e Bump SHAs for stable/stein Diffstat (except docs and test files) ------------------------------------- playbooks/defaults/repo_packages/gnocchi.yml | 2 +- playbooks/defaults/repo_packages/nova_consoles.yml | 2 +- .../defaults/repo_packages/openstack_services.yml | 92 +++++++++++----------- 3 files changed, 48 insertions(+), 48 deletions(-)

1 0

openstack-ansible 21.0.1 (ussuri)
by no-reply＠openstack.org 14 Sep '20

14 Sep '20

We contentedly announce the release of: openstack-ansible 21.0.1: Ansible playbooks for deploying OpenStack This release is part of the ussuri stable release series. The source is available from: https://opendev.org/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ Please report issues through: https://bugs.launchpad.net/openstack-ansible/+bugs For more details, please see below. Changes in openstack-ansible 21.0.0..21.0.1 ------------------------------------------- 737508eb1 Bump SHAs for stable/ussuri c9e24aec0 Fix keys() method output 584d0ab06 Adjust docs for Ussuri c32882bdc Bump SHAs for stable/ussuri a2b303101 Do not override tempest_test_blacklist in CI b1ebd689f Add ironic-inspector to the openstack_services d404a0eec Remove nova_api_placement from inventory 687ebaa14 Pull congress from GitHub to address CI failures after deprecation 5b17728d1 Remove mapping of gnocchi_dentity_only to swift 70e149591 Make upgrade jobs get role relevant versions 31048d1d7 Install required modules for utility env Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 64 ++++++------- deploy-guide/source/app-aboutosa.rst | 4 +- deploy-guide/source/deploymenthost.rst | 7 +- deploy-guide/source/overview-requirements.rst | 9 ++ deploy-guide/source/targethosts-prepare.rst | 2 + inventory/env.d/nova.yml | 4 - inventory/group_vars/haproxy/haproxy.yml | 3 - inventory/group_vars/haproxy/keepalived.yml | 4 +- inventory/group_vars/manila_all.yml | 2 +- inventory/group_vars/utility_all.yml | 3 + inventory/inventory.ini | 2 - playbooks/common-playbooks/nova.yml | 2 - playbooks/defaults/repo_packages/gnocchi.yml | 2 +- playbooks/defaults/repo_packages/nova_consoles.yml | 4 +- .../defaults/repo_packages/openstack_services.yml | 103 +++++++++++---------- playbooks/defaults/source_install.yml | 2 +- playbooks/os-gnocchi-install.yml | 1 - playbooks/os-nova-install.yml | 20 ++-- scripts/gate-check-commit.sh | 6 ++ scripts/get-ansible-role-requirements.yml | 6 +- .../templates/user_variables.aio.yml.j2 | 2 +- .../templates/user_variables_ceph.yml.j2 | 1 + zuul.d/jobs.yaml | 1 + 26 files changed, 143 insertions(+), 124 deletions(-)

1 0

python-monascaclient 2.2.1 (victoria)
by no-reply＠openstack.org 12 Sep '20

12 Sep '20

We are amped to announce the release of: python-monascaclient 2.2.1: Monasca API Client Library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/python-monascaclient Download the package from: https://pypi.org/project/python-monascaclient Please report issues through: https://bugs.launchpad.net/monasca/+bugs For more details, please see below. Changes in python-monascaclient 2.2.0..2.2.1 -------------------------------------------- b628032 Bump default tox env from py37 to py38 Diffstat (except docs and test files) ------------------------------------- tox.ini | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

1 0

python-barbicanclient 5.0.1 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are thrilled to announce the release of: python-barbicanclient 5.0.1: Client Library for OpenStack Barbican Key Management API This release is part of the victoria stable release series. The source is available from: https://opendev.org/openstack/python-barbicanclient Download the package from: https://tarballs.openstack.org/python-barbicanclient/ Please report issues through: https://bugs.launchpad.net/python-barbicanclient/+bugs For more details, please see below. Changes in python-barbicanclient 5.0.0..5.0.1 --------------------------------------------- 1f0feb3 Zuul: port to native v3 job and add victoria unit tests f7faf9b add py38 package metadata 441ac7c Switch from unittest2 compat methods to Python 3.x methods a9913ea Update hacking for Python3 Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 16 +-- barbicanclient/barbican.py | 1 + barbicanclient/barbican_cli/v1/containers.py | 2 +- barbicanclient/client.py | 118 ++++++++++----------- barbicanclient/v1/orders.py | 11 +- playbooks/python-barbicanclient-dsvm/post.yaml | 15 --- playbooks/python-barbicanclient-dsvm/run.yaml | 64 ----------- setup.cfg | 1 + test-requirements.txt | 3 +- tox.ini | 2 +- 15 files changed, 87 insertions(+), 208 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 1e831cf..d0c96f1 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -3,0 +4,2 @@ +hacking>=3.1.0,<3.2.0 # Apache-2.0 + @@ -5 +6,0 @@ coverage!=4.4,>=4.1 # Apache-2.0 -hacking>=1.1.0,<1.2.0 # Apache-2.0

1 0

oslo.vmware 3.7.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are chuffed to announce the release of: oslo.vmware 3.7.0: Oslo VMware library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.vmware Download the package from: https://pypi.org/project/oslo.vmware Please report issues through: https://bugs.launchpad.net/oslo.vmware/+bugs For more details, please see below. Changes in oslo.vmware 3.6.0..3.7.0 ----------------------------------- 5c08559 [goal] Migrate testing to ubuntu focal 7e2b42d Bump bandit version Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 6 +++--- requirements.txt | 4 ++-- test-requirements.txt | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 65917f0..b4ef5f4 100644 --- a/requirements.txt +++ b/requirements.txt @@ -14 +14 @@ oslo.utils>=3.33.0 # Apache-2.0 -PyYAML>=3.12 # MIT +PyYAML>=3.13 # MIT @@ -16 +16 @@ PyYAML>=3.12 # MIT -lxml!=3.7.0,>=3.4.1 # BSD +lxml>=4.5.0 # BSD diff --git a/test-requirements.txt b/test-requirements.txt index 4663c58..83a1429 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -16 +16 @@ coverage!=4.4,>=4.0 # Apache-2.0 -bandit>=1.1.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0

1 0

castellan 3.6.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We exuberantly announce the release of: castellan 3.6.0: Generic Key Manager interface for OpenStack This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/castellan Download the package from: https://tarballs.openstack.org/castellan/ Please report issues through: https://bugs.launchpad.net/castellan/+bugs For more details, please see below. Changes in castellan 3.5.0..3.6.0 --------------------------------- a10ed81 [goal] Migrate testing to ubuntu focal Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 6 +++--- requirements.txt | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 369de27..7a460bc 100644 --- a/requirements.txt +++ b/requirements.txt @@ -6 +6 @@ pbr!=2.1.0,>=2.0.0 # Apache-2.0 -cryptography>=2.1 # BSD/Apache-2.0 +cryptography>=2.7 # BSD/Apache-2.0

1 0

oslo.utils 4.6.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We exuberantly announce the release of: oslo.utils 4.6.0: Oslo Utility library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.utils Download the package from: https://pypi.org/project/oslo.utils Please report issues through: https://bugs.launchpad.net/oslo.utils/+bugs For more details, please see below. Changes in oslo.utils 4.5.0..4.6.0 ---------------------------------- 91497da [goal] Migrate testing to ubuntu focal 632f155 Fix is_same_callback() testing for python3.8 Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 2 +- oslo_utils/reflection.py | 37 +++++++++++++++++++++++++++++++------ 3 files changed, 44 insertions(+), 8 deletions(-)

1 0

oslo.concurrency 4.3.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are satisfied to announce the release of: oslo.concurrency 4.3.0: Oslo Concurrency library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.concurrency Download the package from: https://pypi.org/project/oslo.concurrency Please report issues through: https://bugs.launchpad.net/oslo.concurrency/+bugs For more details, please see below. Changes in oslo.concurrency 4.2.0..4.3.0 ---------------------------------------- 2f78803 Bump bandit version 201255d Imported Translations from Zanata b058d50 Update lower-constraints versions f4f6c0f Align contributing doc with oslo's policy Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 5 ++ lower-constraints.txt | 34 +++++------ .../locale/en_GB/LC_MESSAGES/releasenotes.po | 69 +++++++++++++++++++++- test-requirements.txt | 4 +- 4 files changed, 89 insertions(+), 23 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 2d71e69..e0da2c5 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -10 +10 @@ stestr>=2.0.0 # Apache-2.0 -eventlet!=0.18.3,!=0.20.1,>=0.18.2 # MIT +eventlet>=0.19.0 # MIT @@ -13 +13 @@ eventlet!=0.18.3,!=0.20.1,>=0.18.2 # MIT -bandit>=1.1.0,<1.6.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0

1 0

oslo.rootwrap 6.2.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are satisfied to announce the release of: oslo.rootwrap 6.2.0: Oslo Rootwrap This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.rootwrap Download the package from: https://pypi.org/project/oslo.rootwrap Please report issues through: https://bugs.launchpad.net/oslo.rootwrap/+bugs For more details, please see below. Changes in oslo.rootwrap 6.1.0..6.2.0 ------------------------------------- 499dcad [goal] Migrate testing to ubuntu focal 0d087b0 Bump bandit version 9caec06 Stop to use the __future__ module. d6e259c Align contributing doc with oslo's policy 10d5abd Add release notes links to doc index Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 5 +++++ benchmark/benchmark.py | 2 -- lower-constraints.txt | 4 ++-- oslo_rootwrap/cmd.py | 2 -- oslo_rootwrap/daemon.py | 2 -- test-requirements.txt | 2 +- 7 files changed, 19 insertions(+), 10 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index f231f86..b0959bb 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -20 +20 @@ reno>=3.1.0 # Apache-2.0 -bandit>=1.1.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0

1 0

oslo.db 8.4.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are amped to announce the release of: oslo.db 8.4.0: Oslo Database library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.db Download the package from: https://pypi.org/project/oslo.db Please report issues through: https://bugs.launchpad.net/oslo.db/+bugs For more details, please see below. Changes in oslo.db 8.3.0..8.4.0 ------------------------------- e42c733 [goal] Migrate testing to ubuntu focal 9201de3 Bump bandit version Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 10 +++++----- setup.cfg | 2 +- test-requirements.txt | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index d55902a..ba3fbc1 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -13 +13 @@ testtools>=2.2.0 # MIT -bandit>=1.1.0,<1.6.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0 @@ -16 +16 @@ PyMySQL>=0.7.6 # MIT License -psycopg2>=2.7.0 # LGPL/ZPL +psycopg2>=2.8.0 # LGPL/ZPL

1 0

oslo.policy 3.5.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are satisfied to announce the release of: oslo.policy 3.5.0: Oslo Policy library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.policy Download the package from: https://pypi.org/project/oslo.policy Please report issues through: https://bugs.launchpad.net/oslo.policy/+bugs For more details, please see below. Changes in oslo.policy 3.4.0..3.5.0 ----------------------------------- 9ae1539 [goal] Migrate testing to ubuntu focal d7b2995 sample-generator: Improve YAML output Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 4 ++-- oslo_policy/generator.py | 34 +++++++++++++++------------------- requirements.txt | 2 +- 4 files changed, 28 insertions(+), 32 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 4a0c5ed..2204536 100644 --- a/requirements.txt +++ b/requirements.txt @@ -10 +10 @@ oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 -PyYAML>=3.12 # MIT +PyYAML>=5.1 # MIT

1 0

oslo.limit 1.2.1 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are gleeful to announce the release of: oslo.limit 1.2.1: Limit enforcement library to assist with quota calculation. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.limit Download the package from: https://pypi.org/project/oslo.limit Please report issues through: https://bugs.launchpad.net/oslo.limit/+bugs For more details, please see below. Changes in oslo.limit 1.2.0..1.2.1 ---------------------------------- ddb62b9 Bump bandit version 7f93f46 Add user guide about how to add a new service 1443a6e Align contributing doc with oslo's policy Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 5 +++ test-requirements.txt | 2 +- 3 files changed, 84 insertions(+), 1 deletion(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index effcc24..0250f6c 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -10 +10 @@ stestr>=1.0.0 # Apache-2.0 -bandit>=1.4.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0

1 0

taskflow 4.5.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We jubilantly announce the release of: taskflow 4.5.0: Taskflow structured state management library. This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/taskflow Download the package from: https://pypi.org/project/taskflow Please report issues through: https://bugs.launchpad.net/taskflow/+bugs For more details, please see below. Changes in taskflow 4.4.0..4.5.0 -------------------------------- 212570df [goal] Migrate testing to ubuntu focal Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 12 ++++++------ requirements.txt | 2 +- setup.cfg | 4 ++-- test-requirements.txt | 4 ++-- 4 files changed, 11 insertions(+), 11 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index 15ae60b3..65979f17 100644 --- a/requirements.txt +++ b/requirements.txt @@ -34 +34 @@ oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 -tenacity>=4.4.0 # Apache-2.0 +tenacity>=6.0.0 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt index 7ad3713e..a3ad90d9 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -13 +13 @@ redis>=2.10.0 # MIT -kombu!=4.0.2,>=4.0.0 # BSD +kombu>=4.3.0 # BSD @@ -23 +23 @@ PyMySQL>=0.7.6 # MIT License -psycopg2>=2.7.0 # LGPL/ZPL +psycopg2>=2.8.0 # LGPL/ZPL

1 0

oslo.middleware 4.1.1 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We joyfully announce the release of: oslo.middleware 4.1.1: Oslo Middleware library This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.middleware Download the package from: https://pypi.org/project/oslo.middleware Please report issues through: https://bugs.launchpad.net/oslo.middleware/+bugs For more details, please see below. Changes in oslo.middleware 4.1.0..4.1.1 --------------------------------------- ea8e881 Bump bandit version 69dd162 Fix pygments style 708bd0a Align contributing doc with oslo's policy Diffstat (except docs and test files) ------------------------------------- CONTRIBUTING.rst | 5 +++++ releasenotes/source/conf.py | 2 +- test-requirements.txt | 2 +- 4 files changed, 8 insertions(+), 3 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index 7f63558..33ecb80 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -12 +12 @@ oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 -bandit>=1.1.0,<1.6.0 # Apache-2.0 +bandit>=1.6.0,<1.7.0 # Apache-2.0

1 0

oslo.messaging 12.5.0 (victoria)
by no-reply＠openstack.org 11 Sep '20

11 Sep '20

We are jazzed to announce the release of: oslo.messaging 12.5.0: Oslo Messaging API This release is part of the victoria release series. The source is available from: https://opendev.org/openstack/oslo.messaging Download the package from: https://pypi.org/project/oslo.messaging Please report issues through: https://bugs.launchpad.net/oslo.messaging/+bugs For more details, please see below. Changes in oslo.messaging 12.4.0..12.5.0 ---------------------------------------- a21c96ec [goal] Migrate testing to ubuntu focal Diffstat (except docs and test files) ------------------------------------- lower-constraints.txt | 16 ++++++++-------- requirements.txt | 2 +- setup.cfg | 2 +- test-requirements.txt | 6 +++--- 4 files changed, 13 insertions(+), 13 deletions(-) Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt index cccb632c..6cc4336b 100644 --- a/requirements.txt +++ b/requirements.txt @@ -22 +22 @@ WebOb>=1.7.1 # MIT -PyYAML>=3.12 # MIT +PyYAML>=3.13 # MIT diff --git a/test-requirements.txt b/test-requirements.txt index 42a086a0..cbed7dcf 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -16 +16 @@ pifpaf>=2.2.0 # Apache-2.0 -confluent-kafka>=0.11.6 # Apache-2.0 +confluent-kafka>=1.3.0 # Apache-2.0 @@ -30,2 +30,2 @@ bandit>=1.6.0,<1.7.0 # Apache-2.0 -eventlet!=0.18.3,!=0.20.1,>=0.18.2 # MIT -greenlet>=0.4.10 # MIT +eventlet>=0.23.0 # MIT +greenlet>=0.4.15 # MIT

1 0