March 2018 - Release-announce - lists.openstack.org

[openstackansible] openstack-ansible 15.1.17 (ocata)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We enthusiastically announce the release of: openstack-ansible 15.1.17: Ansible playbooks for deploying OpenStack This release is part of the ocata release series. The source is available from: http://git.openstack.org/cgit/openstack/openstack-ansible Download the package from: https://tarballs.openstack.org/openstack-ansible/ For more details, please see below. 15.1.17 ^^^^^^^ Known Issues ************ * For all ocata releases up to 15.1.16 when executing the os-nova- install.yml playbook the "nova-novncproxy" and "nova- spicehtml5proxy" services will fail. The workaround to resolve this issue is to restart the services. cd /opt/rpc-openstack/openstack-ansible/playbooks # start the service again # replace nova-novncproxy with nova-spicehtml5proxy when appropriate ansible nova_console -m service -a 'name=nova-novncproxy state=restarted' # set the appropriate facts to prevent the playbook trying # to reload it again when the playbook is run again ansible nova_console -m ini_file -a 'dest=/etc/ansible/facts.d/openstack_ansible.fact section=nova option=need_service_restart value=False' This issue has been resolved in the 15.1.17 release. Other Notes *********** * The *max_fail_percentage* playbook option has been used with the default playbooks since the first release of the playbooks back in **Icehouse**. While the intention was to allow large-scale deployments to succeed in cases where a single node fails due to transient issues, this option has produced more problems that it solves. If a failure occurs that is transient in nature but is under the set failure percentage the playbook will report a success, which can cause silent failures depending on where the failure happened. If a deployer finds themselves in this situation the problems are are then compounded because the tools will report there are no known issues. To ensure deployers have the best deployment experience and the most accurate information a change has been made to remove the *max_fail_percentage* option from all of the default playbooks. The removal of this option has the side effect of requiring the deploy to skip specific hosts should one need to be omitted from a run, but has the benefit of eliminating silent, hard to track down, failures. To skip a failing host for a given playbook run use the *--limit '!$HOSTNAME'* CLI switch for the specific run. Once the issues have been resolved for the failing host rerun the specific playbook without the *--limit* option to ensure everything is in sync. Changes in openstack-ansible 15.1.16..15.1.17 --------------------------------------------- 4bf097a Increase Ansible SSH connection retries c1d7a71 Remove the "max_fail_percentage" option c5bbe69 Update all SHAs for 15.1.17 f64e6ba Ensure that constraints are used for AIO bootstrap Diffstat (except docs and test files) ------------------------------------- ansible-role-requirements.yml | 60 ++++++++++---------- global-requirement-pins.txt | 1 + playbooks/ceph-install.yml | 2 - playbooks/defaults/repo_packages/gnocchi.yml | 2 +- .../defaults/repo_packages/openstack_services.yml | 64 +++++++++++----------- playbooks/etcd-install.yml | 2 - playbooks/galera-install.yml | 2 - playbooks/haproxy-install.yml | 1 - playbooks/inventory/group_vars/all.yml | 2 +- playbooks/lxc-containers-create.yml | 1 - playbooks/lxc-containers-destroy.yml | 1 - playbooks/lxc-hosts-setup.yml | 1 - playbooks/memcached-install.yml | 1 - playbooks/openstack-hosts-setup.yml | 1 - playbooks/os-aodh-install.yml | 1 - playbooks/os-barbican-install.yml | 1 - playbooks/os-ceilometer-install.yml | 1 - playbooks/os-cinder-install.yml | 2 - playbooks/os-glance-install.yml | 1 - playbooks/os-gnocchi-install.yml | 1 - playbooks/os-heat-install.yml | 1 - playbooks/os-horizon-install.yml | 1 - playbooks/os-keystone-install.yml | 2 - playbooks/os-magnum-install.yml | 1 - playbooks/os-nova-install.yml | 3 - playbooks/os-swift-install.yml | 2 - playbooks/os-swift-sync.yml | 1 - playbooks/os-tempest-install.yml | 1 - playbooks/rabbitmq-install.yml | 3 - playbooks/repo-server.yml | 1 - playbooks/rsyslog-install.yml | 1 - playbooks/utility-install.yml | 1 - .../nova-novncproxy-restart-55e030f4e7b8654b.yaml | 18 ++++++ .../notes/remove-fax-fail-5038b4b6eb4951b3.yaml | 21 +++++++ scripts/openstack-ansible.rc | 1 + 36 files changed, 111 insertions(+), 102 deletions(-)

1 0

[openstackansible] ansible-hardening 15.1.17 (ocata)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are chuffed to announce the release of: ansible-hardening 15.1.17: OpenStack-Ansible: Host security hardening This release is part of the ocata release series. Download the package from: https://tarballs.openstack.org/ansible-hardening/ For more details, please see below. Changes in ansible-hardening 15.1.16..15.1.17 --------------------------------------------- f07bb96 Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- zuul.d/project.yaml | 2 -- 1 file changed, 2 deletions(-)

1 0

[barbican] castellan-ui 0.1.0
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are stoked to announce the release of: castellan-ui 0.1.0: Generic Key Manager UI Plugin for Horizon This is the first release of castellan-ui. The source is available from: http://git.openstack.org/cgit/openstack/castellan-ui Download the package from: https://tarballs.openstack.org/castellan-ui/ Please report issues through launchpad: http://bugs.launchpad.net/castellan-ui For more details, please see below. Changes in castellan-ui 03ef485632073390307fc4e67e6dd5cdadbda33e..0.1.0 ----------------------------------------------------------------------- bbcebe5 Add Passphrase Panel 2150484 Add Opaque Data Panel 299eb23 Add Symmetric Keys Panel 32c35f6 Add Public and Private Key Panels 2668b69 Add X509 Certificate Panel a3efa18 Add the key manager panel group d1e8f7c Add Castellan client 9f8ec14 Add devstack directory 2a90199 Delete unused files and clean up cookie cutter files 9f52b6b Align tox_install.sh with other projects 4403212 Remove setting of version/release from releasenotes a2f556e Initial ui cookiecutter commit Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt new file mode 100644 index 0000000..9ecc399 --- /dev/null +++ b/requirements.txt @@ -0,0 +1,17 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. +# Order matters to the pip dependency resolver, so sorting this file +# changes how packages are installed. New dependencies should be +# added in alphabetical order, however, some dependencies may need to +# be installed in a specific order. +# +# PBR should always appear first +pbr>=2.0.0,!=2.1.0 # Apache-2.0 +Babel>=2.3.4,!=2.4.0 # BSD +Django>=1.8,<2.0 # BSD +django-babel>=0.5.1 # BSD +django_compressor>=2.0 # MIT +django_openstack_auth>=3.5.0 # Apache-2.0 +django-pyscss>=2.0.2 # BSD License (2 clause) +castellan>=0.7.0 # Apache-2.0 diff --git a/test-requirements.txt b/test-requirements.txt new file mode 100644 index 0000000..d3db44c --- /dev/null +++ b/test-requirements.txt @@ -0,0 +1,28 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. +# Order matters to the pip dependency resolver, so sorting this file +# changes how packages are installed. New dependencies should be +# added in alphabetical order, however, some dependencies may need to +# be installed in a specific order. +# +# Hacking should appear first in case something else depends on pep8 +hacking>=0.12.0,!=0.13.0,<0.14 # Apache-2.0 +# +coverage>=4.0,!=4.4 # Apache-2.0 +django-nose>=1.4.4 # BSD +mock>=2.0 # BSD +mox3>=0.7.0,!=0.19.0 # Apache-2.0 +nodeenv>=0.9.4 # BSD +nose # LGPL +nose-exclude # LGPL +nosehtmloutput>=0.0.3 # Apache-2.0 +nosexcover # BSD +openstack.nose_plugin>=0.7 # Apache-2.0 +openstackdocstheme>=1.16.0 # Apache-2.0 +reno>=1.8.0,!=2.3.1 # Apache-2.0 +selenium>=2.50.1 # Apache-2.0 +sphinx>=1.6.2 # BSD +testtools>=1.4.0 # MIT +# This also needs xvfb library installed on your OS +xvfbwrapper>=0.1.3 #license: MIT

1 0

[nova] nova 17.0.1 (queens)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We eagerly announce the release of: nova 17.0.1: Cloud computing fabric controller This release is part of the queens release series. Download the package from: https://tarballs.openstack.org/nova/ For more details, please see below. Changes in nova 17.0.0..17.0.1 ------------------------------ c50ffc9 Allow 'network' in RequestContext service_catalog 370c104 Check for multiattach before removing connections b006a5b Pass user context to virt driver when detaching volume 02aac48 Handle spawning error on unshelving 9ace6ed Imported Translations from Zanata 5039511 compute: Cleans up allocations after failed resize 733b615 Update noVNC deployment docs to mention non-US keymap fix in 1.0.0 a119e05 [placement] Add functional tests for traits API 852de1e [placement] Add sending global request ID in put (3) d6a072b libvirt: disconnect volume from host during detach c65dfee Check quota before creating volume snapshots 02acd2d Add the ability to get absolute limits from Cinder 6b11eb7 Add resource_class to fields in ironic node cache 7ab98b5 unquiesce instance on volume snapshot failure Diffstat (except docs and test files) ------------------------------------- nova/compute/api.py | 77 +++++++++--- nova/compute/manager.py | 41 +++++-- nova/compute/resource_tracker.py | 21 ++-- nova/conductor/tasks/live_migrate.py | 4 +- nova/context.py | 2 +- nova/locale/cs/LC_MESSAGES/nova.po | 26 +--- nova/locale/de/LC_MESSAGES/nova.po | 26 +--- nova/locale/es/LC_MESSAGES/nova.po | 26 +--- nova/locale/fr/LC_MESSAGES/nova.po | 26 +--- nova/locale/it/LC_MESSAGES/nova.po | 26 +--- nova/locale/ja/LC_MESSAGES/nova.po | 26 +--- nova/locale/ko_KR/LC_MESSAGES/nova.po | 28 +---- nova/locale/pt_BR/LC_MESSAGES/nova.po | 28 +---- nova/locale/ru/LC_MESSAGES/nova.po | 26 +--- nova/locale/tr_TR/LC_MESSAGES/nova.po | 28 +---- nova/locale/zh_CN/LC_MESSAGES/nova.po | 28 +---- nova/locale/zh_TW/LC_MESSAGES/nova.po | 28 +---- nova/scheduler/client/report.py | 45 ++++--- nova/scheduler/utils.py | 7 +- .../api/openstack/placement/gabbits/traits.yaml | 82 ++++++++++++- .../api/openstack/placement/test_report_client.py | 24 ++-- .../api/openstack/compute/test_server_actions.py | 12 +- nova/virt/block_device.py | 2 +- nova/virt/driver.py | 2 +- nova/virt/fake.py | 2 +- nova/virt/hyperv/driver.py | 2 +- nova/virt/ironic/driver.py | 2 +- nova/virt/libvirt/driver.py | 60 +++++++-- nova/virt/vmwareapi/driver.py | 2 +- nova/virt/xenapi/driver.py | 2 +- nova/volume/cinder.py | 17 +++ 46 files changed, 772 insertions(+), 461 deletions(-)

1 0

[tripleo] paunch 1.5.5 (pike)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are stoked to announce the release of: paunch 1.5.5: Utility to launch and manage containers using YAML based configuration data This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/paunch Download the package from: https://tarballs.openstack.org/paunch/ Please report issues through launchpad: http://bugs.launchpad.net/paunch For more details, please see below. Changes in paunch 1.5.4..1.5.5 ------------------------------ d5a89de Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- zuul.d/layout.yaml | 2 -- 1 file changed, 2 deletions(-)

1 0

[telemetry] ceilometer 9.0.5 (pike)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are thrilled to announce the release of: ceilometer 9.0.5: OpenStack Telemetry This release is part of the pike release series. Download the package from: https://tarballs.openstack.org/ceilometer/ For more details, please see below. Changes in ceilometer 9.0.4..9.0.5 ---------------------------------- 48515b4 Gracefully handle missing metadata in libvirt xml 9ec9e3c Fix gnocchi/heat support in telemetry integration tests eb22346 Zuul: Remove project name 5605630 update best practices d54b196 cleanup data-pipelines admin guide ade7a48 ensure pipeline_listener set up Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 48 +++--------- ceilometer/compute/discovery.py | 57 ++++++++------ .../tempest/scenario/test_telemetry_integration.py | 4 +- devstack/plugin.sh | 2 +- .../legacy/ceilometer-tox-py27-mongodb/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-mongodb/run.yaml | 86 ---------------------- .../legacy/ceilometer-tox-py27-mysql/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-mysql/run.yaml | 86 ---------------------- .../ceilometer-tox-py27-postgresql/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-postgresql/run.yaml | 86 ---------------------- .../post.yaml | 80 -------------------- .../telemetry-dsvm-integration-ceilometer/run.yaml | 56 -------------- 15 files changed, 70 insertions(+), 694 deletions(-)

1 0

[winstackers] oswin-tempest-plugin 0.1.0
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are jazzed to announce the release of: oswin-tempest-plugin 0.1.0: This project contains Tempest tests to cover the os_win project, as well as a plugin to automatically load these tests into Tempest. This is the first release of oswin-tempest-plugin. The source is available from: http://git.openstack.org/cgit/openstack/oswin-tempest-plugin Download the package from: https://pypi.python.org/pypi/oswin-tempest-plugin Please report issues through launchpad: http://bugs.launchpad.net/oswin-tempest-plugin For more details, please see below. Changes in oswin-tempest-plugin 0b6b6bfcb98d12aaffc9474ee1c67bd5d4a268ed..0.1.0 ------------------------------------------------------------------------------- e1ebf08 Fixes devstack plugin script 13506c2 Update requirements manually bce1798 Adds metrics collection scenario 3b340a5 Update the documentation link for doc migration cfe2ef1 sets test_qos hypervisor version to 6003 ab50a17 Fixes tests method resolution 975fe23 Deduplicates optional_feature tests 49f63c7 splits the resize mixin into two fb70f97 Fixes flavor ref usage 1d804fd Fixes wsman's methods dbdca9d Fixes test_cluster _create_server method ef51813 Update WinRM config options 4f383d6 Add secure boot optional feature test 45e252c Fixes vNUMA resize negative test 6e1bb25 Fixes disk resize negative test 3cc5f94 Adds devstack oswin-tempest-plugin plugin 76fe654 Increase the test_qos disk usage limit 11f8790 Add Live Migration Mixin fb57b61 Fixes optional_feature's test_resize_remove_feature b3f383b Add RemoteFX optional feature test ddc4157 Add qos optional feature for disk I/O operations 377943c Fixes oswin_tempest_plugin naming 4212a32 Fixes flake8 and unittest errors 763348b Adds Hyper-V Cluster scenario baa1ef3 Adds OptionalFeature mixin and vNUMA test case 696da58 Adds cold resize Mixin 136ef0a Adds cold migration Mixin 7f0fa00 Adds first basic tests and config options caa38fb Apply Tempest plugin cookiecutter 6e24ab0 Apply cookiecutter template Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt new file mode 100644 index 0000000..c2c902c --- /dev/null +++ b/requirements.txt @@ -0,0 +1,11 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. + +pbr!=2.1.0,>=2.0.0 # Apache-2.0 + +oslo.config>=5.1.0 # Apache-2.0 +oslo.log>=3.36.0 # Apache-2.0 +oslo.utils>=3.33.0 # Apache-2.0 +tempest>=17.1.0 # Apache-2.0 +pywinrm>=0.2.2 # MIT diff --git a/test-requirements.txt b/test-requirements.txt new file mode 100644 index 0000000..b64cb5f --- /dev/null +++ b/test-requirements.txt @@ -0,0 +1,15 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. + +hacking<0.13,>=0.12.0 # Apache-2.0 + +coverage!=4.4,>=4.0 # Apache-2.0 +python-subunit>=1.0.0 # Apache-2.0/BSD +sphinx!=1.6.6,>=1.6.2 # BSD +oslosphinx>=4.7.0 # Apache-2.0 +oslotest>=3.2.0 # Apache-2.0 +testrepository>=0.0.18 # Apache-2.0/BSD +testscenarios>=0.4 # Apache-2.0/BSD +testtools>=2.2.0 # MIT +

1 0

[winstackers] os-win 3.0.1 (queens)
by no-reply＠openstack.org 07 Mar '18

07 Mar '18

We are thrilled to announce the release of: os-win 3.0.1: Windows / Hyper-V library for OpenStack projects. This release is part of the queens release series. The source is available from: http://git.openstack.org/cgit/openstack/os-win Download the package from: https://pypi.python.org/pypi/os-win Please report issues through launchpad: http://bugs.launchpad.net/os-win For more details, please see below. Changes in os-win 3.0.0..3.0.1 ------------------------------ f1a9175 [Trivial] Allow flushing named pipe log handles 5335d15 Fixes port security settings caching issue fec6f71 Update UPPER_CONSTRAINTS_FILE for stable/queens 1821263 Update .gitreview for stable/queens Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + os_win/utils/io/namedpipe.py | 7 +++++++ os_win/utils/network/networkutils.py | 13 +++++++------ tox.ini | 2 +- 6 files changed, 33 insertions(+), 12 deletions(-)

1 0

[telemetry] ceilometer 8.1.4 (ocata)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are gleeful to announce the release of: ceilometer 8.1.4: OpenStack Telemetry This release is part of the ocata release series. Download the package from: https://tarballs.openstack.org/ceilometer/ For more details, please see below. Changes in ceilometer 8.1.3..8.1.4 ---------------------------------- afaa7f7 Gracefully handle missing metadata in libvirt xml 75181bc Imported Translations from Zanata d6608bf Fix gnocchi/heat support in telemetry integration tests 88389e2 Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 48 +++--------- ceilometer/compute/discovery.py | 57 ++++++++------ ceilometer/locale/pt_BR/LC_MESSAGES/ceilometer.po | 70 +++++++++++++++++- devstack/plugin.sh | 2 + devstack/settings | 4 + .../legacy/ceilometer-tox-py27-mongodb/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-mongodb/run.yaml | 86 ---------------------- .../legacy/ceilometer-tox-py27-mysql/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-mysql/run.yaml | 86 ---------------------- .../ceilometer-tox-py27-postgresql/post.yaml | 67 ----------------- .../legacy/ceilometer-tox-py27-postgresql/run.yaml | 86 ---------------------- .../post.yaml | 80 -------------------- .../telemetry-dsvm-integration-ceilometer/run.yaml | 56 -------------- 13 files changed, 118 insertions(+), 658 deletions(-)

1 0

[senlin] senlin 5.0.1 (queens)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are chuffed to announce the release of: senlin 5.0.1: OpenStack Clustering This release is part of the queens release series. Download the package from: https://tarballs.openstack.org/senlin/ Please report issues through launchpad: https://bugs.launchpad.net/senlin-tempest-plugin For more details, please see below. Changes in senlin 5.0.0..5.0.1 ------------------------------ 38f22bc Get image id from multiple places 6792221 Add scaling policy version support message a489cbe Fix lb and delete policy not support 1.0 version 9e7e1db Imported Translations from Zanata 3f1df4d Update UPPER_CONSTRAINTS_FILE for stable/queens 200eefc Update .gitreview for stable/queens Diffstat (except docs and test files) ------------------------------------- .gitreview | 1 + .../source/locale/fr/LC_MESSAGES/releasenotes.po | 63 - .../locale/zh_CN/LC_MESSAGES/releasenotes.po | 212 -- senlin/engine/registry.py | 17 +- senlin/locale/de/LC_MESSAGES/senlin.po | 2027 ++++++++++++++++++++ senlin/policies/scaling_policy.py | 5 + senlin/profiles/os/nova/server.py | 33 +- setup.cfg | 2 + tox.ini | 2 +- 11 files changed, 2092 insertions(+), 300 deletions(-)

1 0

[vitrage] vitrage-tempest-plugin 1.0.0
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are delighted to announce the release of: vitrage-tempest-plugin 1.0.0: Tempest plugin for Vitrage project This is the first release of vitrage-tempest-plugin. The source is available from: https://git.openstack.org/cgit/openstack/vitrage-tempest-plugin Download the package from: https://pypi.python.org/pypi/vitrage-tempest-plugin Please report issues through launchpad: https://bugs.launchpad.net/vitrage For more details, please see below. Changes in vitrage-tempest-plugin 76c539d02ca683cec5ba3c0c5205ad65314a9a80..1.0.0 --------------------------------------------------------------------------------- cbcf58b Rename vitrage_tempest_plugin to vitrage-tempest-plugin in setup.cfg dadcdfa update home-page url 8534ccb Renamed vitrage_tempest_tests to vitrage_tempest_plugin 78ff8b8 don't log to stderr http logs b0f3efb project id is not sent in webhook a76ad71 update time stamp duplicates 3cbdbc8 fix py3 a2926cf Fix test_e2e_webhook test 3251002 fix py3 b830ce4 make tests error messages better 3241176 Fix documentation build 861323e Updated from global requirements 30cb3ec fix deduced alarm test and add test to check correct payload filter 89655ff Updated from global requirements 2504123 add some utility asserts 4bf463c rename tests 3eb433b fix test to match updated webhoook filter b35f86d Add related templates to tests in order to remove legacy templates dir 4c69704 disable persistency tests dc97cd1 use py35 not py34 1d00f20 disable dsvm jobs 8f5d9ee sync tempest e0457b7 Updated from global requirements 94564ee sync tempest 2c09da0 sync vitrage tempest e7d594e sync vitrage tempest 06f7cf8 suppress ResourceWarning: unclosed socket 9e80c02 add logging 0ef1c2a add vitrage dsvm jobs 953525d sync tempest tests 681d50c Sync tempest changes for template functions e20f739 add logging 04a49ec add some logging remove pypy from tox ff177fa remove python client from requirements ac02fd0 Added devstack plugin for vitrage-tempest-plugin f057c98 sync tempest tests a561457 remove vitrage from requirements e08334e sync tempest tests 805f7c5 Fixed typo in package name b2c343d Sync tempest changes made in https://review.openstack.org/#/c/529332 f0f878f sync tempest tests 192b8c6 dont fail test on rollback just print error 19db7dd fix requirements ebacb35 test 76c6380 update requirements a1ba2a3 update requirements e60e99b update requirements c07b8b1 Fixed README links b26e0a2 Code sync for support json field in db 2c41a19 Apply cookiecutter to newly split project vitrage-tempest-plugin 968164b be more verbose when test fails 9267f0d remove redundant code 2b84f86 tempest utility function 023b7b6 more tempest refactoring 2025fc5 remove neutron.port not related to instances 8564ae1 add tempest tests 05a9f11 Vitrage Persistor Service daceb34 Tempest tests fix 18b0d0b new e2e tempest to check actions ad09015 fix py charm warnings and doc 232240b Rewrite Aodh datasource 74f99e9 Tempest refactoring b10ca4a support nested stack in heat f7cd3da fix tempest cli test d846b67 Moving vitrage_id logic to transformer 89c6157 Tempest test for Vitrage integration with Mistral bbe022f make tempest work under py3 0339ac7 fix import error fb7b441 Doc Migration: move the developer guide documents under the "contributor" folder c8255a6 Fixed order of arguments in assertEqual 5899c87 Separation of Evaluator and InitializationStatus from ConsistencyEnforcer c76c71f add some logs b0e45e6 create collector service be1046e event tempst test changes 6fef0a7 Replacing hardcoded values with constants cc015b5 Vertex Properties refactoring d4505d3 performance improvement in the processor. Use set instead of using list. a6ead15 gate fix - extract images list from glance instead of nova b8c1d85 Fixed the name of group options in get_opts_lists cbf6ded Fix Doctor test 47d1672 Vitrage ID and vertex id will be standard openstack uuid from now on - fixed bfdeea7 add resource show API 3a4aa02 implement the resource list API d0673e0 Pass option list instead of group name 0297203 fix the type of `all_tenants` b81348d add some delay between post and get b4f00f0 reformat the event time to return unicode string 2379186 reformat the event time fa75e2a make test event work 62a9fb5 fix for running nosetests locally on devstack 9e6188c fix the vitrage id in test 2209828 fix the TestEvent test bb8542d fix the TestEvent test 806f681 Remove unused logging import cb19bdb fix heat test 0be6b78 fix the client attribute for alarms 8c4e49d fix the client attribute for alarms c11e59d decouple test events from its base class 705e1a9 use 'true' and 'false' instead of magic num 86dab82 not condition 7ee8f03 Allow interchangeable graph class for the entity graph. Graph driver class is a configurable entry point using stevedore, can be changed in entry_points.txt and vitrage.conf. NetworkX graph - classes encapsulation, can now easily be replaced 1d36585 Support post event API 3ac340c more tempests changes f23c1cb fix tempests in gate 2623cb3 Transformers refactoring b8f4e62 Tempests fix 462af0a Tempsets exception raise change f9325fa heat tempest fix fa1a5df add prints for exceptions ec36bde Replaced e.message with str(e) f8f9473 change constants names c4dd8a7 rename internal vitrage properties fdb3bf0 skip heat tempest temporary 09cba46 Multi tenancy for topology, alarms and rca apis. adaa4a6 Stop adding ServiceAvailable group option 79ad239 rename vitrage engine to vitrage service 674fbfd make the os clients dynamiclly imported 275c331 add new datasource documentation 25bd136 Enable heat tempests fc012a8 skip heat tempest 6583605 heat tempests 0d13154 change api syntax for alarms list 853332f Add new Tempest for datasources in the gate 3c77bf8 Datasource tempests changes ca92d1a tempests changes 338ec61 add tempest tests for template list/validate/show api's b313967 add neutron test and fix bug 1593447: vitrage topology show doesn't show all the graph for type graph f505db3 a depth in `get topology show` API can only be used if there is a root 8701725 Neutron Network and Port Notifier support 8b20541 tests optimizations - add assert validations 25b65c0 Added Template&Confs to Tempest Env b4381b7 add set state test and aodh notifier test 75eb9f9 Graph-type tree without a filter a6f7930 Rearrange state_manager d594cba rca 9e3d05b tempest cli configuration e1c65c3 add self.assertIsNotNone(api_graph) in test_topology tests 80e3b31 get topology with wrong filter returns 404 59e97de tempest changes 0d5d79a tempest configuration e936aff tempest configuration 3a4c4f9 tempest configuration 703bdff tempest configuration fb128e2 tempest configuration d6ea3ea Tempest Fix for Gate d4db0f4 get topology API don't handle the parameter depth 4d690f9 tempests changes efbf691 alarms and templates df87dcf support py3 d491b74 remove misc intellij warnings 2995512 Bug fixes + aodh tempest 7a85a04 Cosmetic changes 2b602a2 tempest for datasources 5fb0b20 change normalized state to normalized value 5892cc8 topology tempest 797b39a rename refactor - replace 'synchronizer' and 'plugin' to 'datasource' and 'driver' 182a86f topology tempests 2fc1286 change hierarchy 291e715 add alarms & change tempest folder hierarchy 2f5f2b1 fix runners & new topology tests 3fadd91 fix misc intellij inspection warnings 3574bd2 fix misc intellij inspection warnings ed7e66d fix inheritance 9912e6f fix method call 654da2c state normalization support implementation c80266d get_topology validation & run_vitrage_tempest.sh 1945086 consistency initializing process implements: blueprint entity-graph-consistency-validator 799ed45 run_vitrage & stop_vitrage & get_topology Requirements updates -------------------- diff --git a/requirements.txt b/requirements.txt new file mode 100644 index 0000000..d979421 --- /dev/null +++ b/requirements.txt @@ -0,0 +1,24 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. +# The order of packages isrequirementst, because pip processes them in the order + +pbr!=2.1.0,>=2.0.0 # Apache-2.0 +aodhclient>=0.9.0 # Apache-2.0 +python-heatclient>=1.10.0 # Apache-2.0 +python-ceilometerclient>=2.5.0 # Apache-2.0 +python-cinderclient>=3.3.0 # Apache-2.0 +python-dateutil>=2.4.2 # BSD +python-keystoneclient>=3.8.0 # Apache-2.0 +python-neutronclient>=6.7.0 # Apache-2.0 +python-novaclient>=9.1.0 # Apache-2.0 +python-mistralclient!=3.2.0,>=3.1.0 # Apache-2.0 +python-glanceclient>=2.8.0 # Apache-2.0 +six>=1.10.0 # MIT +oslo.config>=5.1.0 # Apache-2.0 +oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0 +oslo.log>=3.36.0 # Apache-2.0 +testtools>=2.2.0 # MIT +oslotest>=3.2.0 # Apache-2.0 +tempest>=17.1.0 # Apache-2.0 +networkx<2.0,>=1.10 # BSD diff --git a/test-requirements.txt b/test-requirements.txt new file mode 100644 index 0000000..4d7f782 --- /dev/null +++ b/test-requirements.txt @@ -0,0 +1,10 @@ +# The order of packages is significant, because pip processes them in the order +# of appearance. Changing the order has an impact on the overall integration +# process, which may cause wedges in the gate later. + +hacking<0.13,>=0.12.0 # Apache-2.0 + +sphinx!=1.6.6,>=1.6.2 # BSD +openstackdocstheme>=1.18.1 # Apache-2.0 +# releasenotes +reno>=2.5.0 # Apache-2.0

1 0

[tripleo] os-net-config 6.1.4 (ocata)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are thrilled to announce the release of: os-net-config 6.1.4: OpenStack network configuration This release is part of the ocata release series. The source is available from: http://git.openstack.org/cgit/openstack/os-net-config Download the package from: https://tarballs.openstack.org/os-net-config/ Please report issues through launchpad: http://bugs.launchpad.net/os-net-config For more details, please see below. Changes in os-net-config 6.1.3..6.1.4 ------------------------------------- 694f06c OvS 2.7 support - dpdk-devargs needs to provided for DPDK devices 8ecbb1a Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- os_net_config/impl_ifcfg.py | 18 +++++++++ os_net_config/utils.py | 28 ++++++++++++- zuul.d/layout.yaml | 2 - 5 files changed, 129 insertions(+), 6 deletions(-)

1 0

[tripleo] tripleo-heat-templates 6.2.11 (ocata)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We eagerly announce the release of: tripleo-heat-templates 6.2.11: Heat templates for deploying OpenStack with OpenStack. This release is part of the ocata release series. The source is available from: http://git.openstack.org/cgit/openstack/tripleo-heat-templates Download the package from: https://tarballs.openstack.org/tripleo-heat-templates/ Please report issues through launchpad: http://bugs.launchpad.net/tripleo For more details, please see below. 6.2.11 ^^^^^^ Security Issues *************** * Change the IPtables rule for SNMP service and open 161 udp port on SnmpdIpSubnet parameter instead of 0.0.0.0/0. If SnmpdIpSubnet is left empty, SnmpdNetwork will be used. Bug Fixes ********* * The custom roles for deployed-server in deployed-server-roles- data.yaml will now work when configuring overcloud SSL. * As documented in launchpad bug 1708680 the templates for manila with the "generic" back end do not yield a successful manila deployment even if they do not cause the overall overcloud deployment to fail, so we are dropping these faulty and unmaintained manila "generic" back end templates. * Fix Heat condition for RHEL registration yum update There were 2 problems with this condition making the rhel-registration.yaml template broken: "conditions" should be "condition" and the condition should refer to just a condition name defined in the "conditions:" section of the template. See https://bugs.launchpad.net/tripleo/+bug/1709916 Changes in tripleo-heat-templates 6.2.10..6.2.11 ------------------------------------------------ 298599d Add reno for manila generic driver removal 9ccea2b Adding new config parameters for Cisco UCSM ML2 driver f307214 Tolerate network errors in pingtest retry logic eb8de76 Handle NodeTLSData resources for controller roles a67b208 Restrict SNMP to internal network f9ded93 Fix Heat condition for RHEL registration yum update dcd8a69 Do not use the 3rd argument of yaql groupBy baf4af5 Removes manila-generic-config from TripleO acf6d3b Fix the dellemc vmax to use the correct hiera name Diffstat (except docs and test files) ------------------------------------- capabilities-map.yaml | 8 -- deployed-server/deployed-server-roles-data.yaml | 1 - environments/contrail/roles_data_contrail.yaml | 1 - environments/manila-generic-config.yaml | 24 ------ environments/neutron-ml2-cisco-nexus-ucsm.yaml | 3 + .../rhel-registration/rhel-registration.yaml | 9 ++- network/service_net_map.j2.yaml | 1 + overcloud-resource-registry-puppet.j2.yaml | 1 - overcloud.j2.yaml | 10 +-- .../all_nodes/neutron-ml2-cisco-nexus-ucsm.j2.yaml | 25 +++++- puppet/role.role.j2.yaml | 31 +++++++- .../cinder-backend-dellemc-vmax-iscsi.yaml | 4 +- puppet/services/manila-backend-generic.yaml | 89 ---------------------- puppet/services/snmp.yaml | 19 ++++- .../deployed-server-ssl-c33d6810b889045c.yaml | 4 + ...-generic-driver-templates-b33e8966c263a1fd.yaml | 7 ++ ...at-condition-for-rhel-reg-311a3dce76cc0ec1.yaml | 9 +++ .../notes/snmp_firewall-ab17f60ba1ec71d2.yaml | 7 ++ roles_data.yaml | 1 - validation-scripts/all-nodes.sh | 3 +- 20 files changed, 117 insertions(+), 140 deletions(-)

1 0

[tripleo] puppet-tripleo 6.5.10 (ocata)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are glad to announce the release of: puppet-tripleo 6.5.10: Puppet module for OpenStack TripleO This release is part of the ocata release series. Download the package from: https://tarballs.openstack.org/puppet-tripleo/ For more details, please see below. 6.5.10 ^^^^^^ New Features * IPtables rules managed by Neutron won't be persistent on the host anymore. Instead, they'll be removed (if exist) from /etc/sysconfig/iptables. Changes in puppet-tripleo 6.5.9..6.5.10 --------------------------------------- 72669ad Prepare 6.5.10 release (ocata) 8dee155 Reload iptables instead of restart a6bffe1 Give horizon's stanza in haproxy a per-server cookie 001bb35 Remove neutron-managed firewall rules from /etc/sysconfig/iptables f9e27f7 Use on-marked-down shutdown-sessions for redis haproxy conf f127712 Conditionally include nova patch config in Nuage Diffstat (except docs and test files) ------------------------------------- manifests/firewall.pp | 34 +++++++++++++++++++++- manifests/haproxy.pp | 18 +++++++----- .../profile/base/neutron/plugins/ml2/nuage.pp | 9 ++++++ metadata.json | 2 +- .../notes/neutron_iptables-9ea317c73b79929d.yaml | 5 ++++ 5 files changed, 59 insertions(+), 9 deletions(-)

1 0

[tripleo] tripleo-puppet-elements 7.0.6 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We contentedly announce the release of: tripleo-puppet-elements 7.0.6: Puppet building rules for OpenStack images. This release is part of the pike release series. Download the package from: https://tarballs.openstack.org/tripleo-puppet-elements/ For more details, please see below. Changes in tripleo-puppet-elements 7.0.5..7.0.6 ----------------------------------------------- 246581f Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- zuul.d/layout.yaml | 2 -- 1 file changed, 2 deletions(-)

1 0

[tripleo] tripleo-common 7.6.10 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are ecstatic to announce the release of: tripleo-common 7.6.10: A common library for TripleO workflows. This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/tripleo-common Download the package from: https://tarballs.openstack.org/tripleo-common/ Please report issues through launchpad: http://bugs.launchpad.net/tripleo-common For more details, please see below. Changes in tripleo-common 7.6.9..7.6.10 --------------------------------------- ab9faf9 upgrade-non-controller.sh script does not support alternative plan names ec3cb8d Use extra_vars to pass ireallymeanit 3b28a71 Zuul: Remove project name e2eabaa Log the error from OrchestrationDeployAction 77e67b7 Prevent apache from listening on default ports 7596f4a Fix healthchecks permissions 70edcda Allow running mistral-api service via wsgi in container Diffstat (except docs and test files) ------------------------------------- .../tripleo_kolla_template_overrides.j2 | 108 +++++++++++++-------- scripts/upgrade-non-controller.sh | 34 ++++--- tripleo_common/actions/deployment.py | 3 + workbooks/ceph-ansible.yaml | 2 + zuul.d/layout.yaml | 2 - 5 files changed, 91 insertions(+), 58 deletions(-)

1 0

[tripleo] instack-undercloud 7.4.10 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We jubilantly announce the release of: instack-undercloud 7.4.10: instack-undercloud This release is part of the pike release series. The source is available from: https://git.openstack.org/cgit/openstack/instack-undercloud Download the package from: https://tarballs.openstack.org/instack-undercloud/ Please report issues through launchpad: https://bugs.launchpad.net/tripleo For more details, please see below. Changes in instack-undercloud 7.4.9..7.4.10 ------------------------------------------- 50217d7 Fix bootstrap NAT 82c529b Zuul: Remove project name 7d9654c Make sure selinux permissions are correct on ~/.ssh. Diffstat (except docs and test files) ------------------------------------- .../puppet-stack-config/puppet-stack-config.pp | 11 +++++++++ .../puppet-stack-config.yaml.template | 9 +++++++- .../post-configure.d/98-undercloud-setup | 18 ++++++++++----- instack_undercloud/undercloud.py | 27 ++++++++++++++++++++++ zuul.d/layout.yaml | 2 -- 5 files changed, 58 insertions(+), 9 deletions(-)

1 0

[tripleo] tripleo-validations 7.4.7 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We contentedly announce the release of: tripleo-validations 7.4.7: A collection of Ansible playbooks to detect and report potential issues during TripleO deployments This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/tripleo-validations Download the package from: https://tarballs.openstack.org/tripleo-validations/ Please report issues through launchpad: https://bugs.launchpad.net/tripleo/+bugs?field.tag=validations For more details, please see below. Changes in tripleo-validations 7.4.6..7.4.7 ------------------------------------------- 602fb5f Change controller ulimit to match the default dc340f0 Zuul: Remove project name 3ab0532 Change HAProxy validation queue timeout to match the default Diffstat (except docs and test files) ------------------------------------- validations/controller-ulimits.yaml | 2 +- validations/haproxy.yaml | 2 +- zuul.d/layout.yaml | 2 -- 3 files changed, 2 insertions(+), 4 deletions(-)

1 0

[tripleo] tripleo-heat-templates 7.0.10 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are amped to announce the release of: tripleo-heat-templates 7.0.10: Heat templates for deploying OpenStack with OpenStack. This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/tripleo-heat-templates Download the package from: https://tarballs.openstack.org/tripleo-heat-templates/ Please report issues through launchpad: http://bugs.launchpad.net/tripleo For more details, please see below. 7.0.10 ^^^^^^ New Features ************ * Add support for Dell EMC VNX cinder driver Security Issues *************** * Change the IPtables rule for SNMP service and open 161 udp port on SnmpdIpSubnet parameter instead of 0.0.0.0/0. If SnmpdIpSubnet is left empty, SnmpdNetwork will be used. Bug Fixes ********* * As documented in launchpad bug 1708680 the templates for manila with the "generic" back end do not yield a successful manila deployment even if they do not cause the overall overcloud deployment to fail, so we are dropping these faulty and unmaintained manila "generic" back end templates. Changes in tripleo-heat-templates 7.0.9..7.0.10 ----------------------------------------------- 677c4c2 Do not use the 3rd argument of yaql groupBy 69565d7 Restrict SNMP to internal network 6bfb49a Add reno for manila generic driver removal 6587b6e swift_rsync: don't bind mount /run 3876ec4 Unify the Cinder HA and non-HA docker configurations e16c409 Fix a typo in docker_puppet_apply.sh cfa0e21 docker: don't override horizon::vhost_extra_params cf87b65 Adding new config parameters for Cisco UCSM ML2 driver 9d44e26 Improve debugging possibilities for docker-puppet.py time handling bf13bb4 Adding /usr/share/neutron/server config dir 34ef39d Mount central agent log dir to access outside the container 6a25b21 Removes manila-generic-config from TripleO f2c12ef Add support for Dell EMC VNX Cinder Backend 280b100 Add CephClient and CephExternal to the Telemetry role dc6808b Add bond-network-templates for OVB public bond CI Diffstat (except docs and test files) ------------------------------------- capabilities-map.yaml | 17 +- ci/environments/network/public-bond/README | 23 + .../network/public-bond/network-environment.yaml | 26 + .../public-bond/network-isolation-absolute.yaml | 28 + .../network/public-bond/network-isolation.yaml | 28 + .../public-bond/nic-configs/ceph-storage.yaml | 123 ++++ .../public-bond/nic-configs/cinder-storage.yaml | 96 +++ .../network/public-bond/nic-configs/compute.yaml | 134 ++++ .../public-bond/nic-configs/controller.yaml | 160 +++++ .../public-bond/nic-configs/swift-storage.yaml | 96 +++ .../network/public-bond/ui-settings.pickle | 699 +++++++++++++++++++++ deployed-server/deployed-server-roles-data.yaml | 2 +- environments/cinder-dellemc-vnx-config.yaml | 19 + environments/contrail/roles_data_contrail.yaml | 1 - environments/manila-generic-config.yaml | 24 - environments/neutron-ml2-cisco-nexus-ucsm.yaml | 3 + network/service_net_map.j2.yaml | 1 + overcloud-resource-registry-puppet.j2.yaml | 2 +- overcloud.j2.yaml | 12 +- .../all_nodes/neutron-ml2-cisco-nexus-ucsm.j2.yaml | 25 +- puppet/services/cinder-backend-dellemc-vnx.yaml | 106 ++++ puppet/services/horizon.yaml | 1 + puppet/services/manila-backend-generic.yaml | 101 --- puppet/services/snmp.yaml | 19 +- ...-generic-driver-templates-b33e8966c263a1fd.yaml | 7 + .../notes/snmp_firewall-ab17f60ba1ec71d2.yaml | 7 + .../notes/vnx_cinder_b5572898724a11e7.yaml | 4 + roles/Controller.yaml | 2 +- roles/ControllerOpenstack.yaml | 1 - roles/Telemetry.yaml | 2 + roles_data.yaml | 2 +- 42 files changed, 1745 insertions(+), 217 deletions(-)

1 0

[tripleo] tripleo-image-elements 7.0.4 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are happy to announce the release of: tripleo-image-elements 7.0.4: Disk image builder elements for deploying OpenStack. This release is part of the pike release series. Download the package from: https://tarballs.openstack.org/tripleo-image-elements/ For more details, please see below. Changes in tripleo-image-elements 7.0.3..7.0.4 ---------------------------------------------- a008812 Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- zuul.d/layout.yaml | 2 -- 1 file changed, 2 deletions(-)

1 0

[tripleo] os-net-config 7.3.4 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are happy to announce the release of: os-net-config 7.3.4: OpenStack network configuration This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/os-net-config Download the package from: https://tarballs.openstack.org/os-net-config/ Please report issues through launchpad: http://bugs.launchpad.net/os-net-config For more details, please see below. Changes in os-net-config 7.3.3..7.3.4 ------------------------------------- 4a59e79 Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- zuul.d/layout.yaml | 2 -- 1 file changed, 2 deletions(-)

1 0

[tripleo] python-tripleoclient 7.3.9 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are thrilled to announce the release of: python-tripleoclient 7.3.9: TripleO client This release is part of the pike release series. Download the package from: https://tarballs.openstack.org/python-tripleoclient/ For more details, please see below. 7.3.9 ^^^^^ Bug Fixes * This patch fixes https://bugs.launchpad.net/tripleo/+bug/1743575 The bug prevents a successeful stack creation when using a custom role with a composable service. Changes in python-tripleoclient 7.3.8..7.3.9 -------------------------------------------- ffc4540 Zuul: Remove project name e4d440a Composable role and service fails workflow Diffstat (except docs and test files) ------------------------------------- releasenotes/notes/bug-1743575-dcacfa668eaf51a6.yaml | 6 ++++++ tripleoclient/v1/overcloud_deploy.py | 17 +++++++++-------- zuul.d/layout.yaml | 2 -- 3 files changed, 15 insertions(+), 10 deletions(-)

1 0

[tripleo] puppet-tripleo 7.4.10 (pike)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We enthusiastically announce the release of: puppet-tripleo 7.4.10: Puppet module for OpenStack TripleO This release is part of the pike release series. The source is available from: http://git.openstack.org/cgit/openstack/puppet-tripleo Download the package from: https://tarballs.openstack.org/puppet-tripleo/ Please report issues through launchpad: http://bugs.launchpad.net/tripleo (tag: puppet) For more details, please see below. 7.4.10 ^^^^^^ New Features * IPtables rules managed by Neutron won't be persistent on the host anymore. Instead, they'll be removed (if exist) from /etc/sysconfig/iptables. * Add support to configure Dell EMC VNX cinder backend Changes in puppet-tripleo 7.4.9..7.4.10 --------------------------------------- 2618196 Prepare 7.4.10 release (pike) 58e99c7 Reload iptables instead of restart d20bcb7 Remove neutron-managed firewall rules from /etc/sysconfig/iptables c98f93e Avoid hard-coded settings in Cinder HA containers d01e89e Fix galera deployment when stack's name has capital letters b88330e Add support for Dell EMC VNX Cinder Backend 80b0ddb Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- Puppetfile_extras | 3 + .../functions/docker_volumes_to_storage_maps.rb | 52 +++++++++ manifests/firewall.pp | 34 +++++- manifests/profile/base/cinder/volume.pp | 14 +++ .../profile/base/cinder/volume/dellemc_vnx.pp | 53 +++++++++ .../profile/pacemaker/cinder/backup_bundle.pp | 47 ++++++-- .../profile/pacemaker/cinder/volume_bundle.pp | 47 ++++++-- manifests/profile/pacemaker/database/mysql.pp | 9 +- .../profile/pacemaker/database/mysql_bundle.pp | 9 +- metadata.json | 2 +- .../notes/neutron_iptables-9ea317c73b79929d.yaml | 5 + .../notes/vnx_driver_bea44d073cd161e7.yaml | 4 + .../tripleo_profile_base_cinder_vnx_spec.rb | 57 +++++++++ ..._profile_pacemaker_cinder_backup_bundle_spec.rb | 121 ++++++++++++++++++++ ..._profile_pacemaker_cinder_volume_bundle_spec.rb | 127 +++++++++++++++++++++ spec/fixtures/hieradata/default.yaml | 8 ++ zuul.d/layout.yaml | 1 - 17 files changed, 558 insertions(+), 35 deletions(-)

1 0

[documentation] openstackdocstheme 1.19.0
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We contentedly announce the release of: openstackdocstheme 1.19.0: OpenStack Docs Theme The source is available from: https://git.openstack.org/cgit/openstack/openstackdocstheme Download the package from: https://tarballs.openstack.org/openstackdocstheme/ Please report issues through launchpad: https://launchpad.net/openstack-doc-tools For more details, please see below. Changes in openstackdocstheme 1.18.1..1.19.0 -------------------------------------------- df38978 trivial: Generate '{project}-doc' roles, not '{project}-doc-link' 057ffd6 Avoid text overflow in toc 5371da1 Fix typo in logger.warning() call 1bde610 automatically create project doc-link roles 3e090c4 Remove name from project stanza 84f1b67 Updated from global requirements e98856b Update the description of "giturl" Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 1 - openstackdocstheme/__init__.py | 37 +++++++++++++++++++++- .../theme/openstackdocs/script_footer.html | 6 ++-- .../theme/openstackdocs/static/css/combined.css | 3 ++ test-requirements.txt | 2 +- 6 files changed, 70 insertions(+), 8 deletions(-) Requirements updates -------------------- diff --git a/test-requirements.txt b/test-requirements.txt index dfaad59..cbb147d 100644 --- a/test-requirements.txt +++ b/test-requirements.txt @@ -8 +8 @@ hacking!=0.13.0,<0.14,>=0.12.0 # Apache-2.0 -sphinx>=1.6.2 # BSD +sphinx!=1.6.6,>=1.6.2 # BSD

1 0

[openstacksdk] shade 1.27.1 (queens)
by no-reply＠openstack.org 06 Mar '18

06 Mar '18

We are pumped to announce the release of: shade 1.27.1: Simple client library for interacting with OpenStack clouds This release is part of the queens release series. Download the package from: https://pypi.python.org/pypi/shade For more details, please see below. 1.27.1 ^^^^^^ Bug Fixes * Fixed an issue where an optimization in the logic to find floating ips first when looking for public ip addresses broke finding the correct private address. Changes in shade 1.27.0..1.27.1 ------------------------------- 53f2766 Fix private_v4 selection related to floating ip matching 1ee7023 Zuul: Remove project name Diffstat (except docs and test files) ------------------------------------- .zuul.yaml | 1 - ...ating-ip-private-matching-84e369eee380a185.yaml | 6 + shade/meta.py | 10 ++ 4 files changed, 206 insertions(+), 1 deletion(-)

1 0