Re: [TripleO] Offline Installation Support
Hi Harald, Thanks for sharing the steps and apologies for the late reply. I tried setting up Local Repo Server and Registry Server on one machine. Using that I successfully deployed Openstack Ussuri Undercloud and Overcloud in an offline mode. Now, in order to test Upgrade from USSURI to VICTORIA, I updated the repo file and podman registry at my local server for Victoria. On Undercloud , repo file content is as follows: [tripleo] baseurl = http://30.30.30.8/software/repos/tripleo_victoria enabled = 1 gpgcheck = 0 module_hotfixes=1 name = tripleo where 30.30.30.8 is the IP of my reposerver. With this I have successfully updated the required packages using the command: *sudo yum update python*-tripleoclient openstack-tripleo-common openstack-tripleo-heat-templates* Also the container image prepare file, now has the following content parameter_defaults: ContainerImagePrepare: - push_destination: true set: name_prefix: openstack- name_suffix: '' namespace: myserver.com:5000/tripleovictoria neutron_driver: ovn rhel_containers: false tag: current-tripleo tag_from_label: rdo_version But once I run the command "*openstack undercloud upgrade*", I get the following error 2022-03-23 09:53:24,527 p=380392 u=root n=ansible | 2022-03-23 09:53:24.527073 | 5254007b-2040-558f-a68f-0000000000ac | FATAL | Ensure DNF modules have the right stream | undercloud | item={'module': 'container-tools', 'stream': '3.0'} | error={ "ansible_loop_var": "item", "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "autoremove": false, "bugfix": false, "conf_file": null, "disable_excludes": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": [], "download_dir": null, "download_only": false, "enable_plugin": [], "enablerepo": [], "exclude": [], "install_repoquery": true, "install_weak_deps": true, "installroot": "/", "list": null, "lock_timeout": 30, "name": [ "@container-tools:3.0/common" ], "releasever": null, "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "item": { "module": "container-tools", "stream": "3.0" }, "msg": "*No group container-tools:3.0/common available*.", "results": [] } Can you please help in resolving this issue. Regards Anirudh Gupta On Wed, Mar 23, 2022 at 2:06 PM Lokendra Rathour <lokendrarathour@gmail.com> wrote:
---------- Forwarded message --------- From: Harald Jensas <hjensas@redhat.com> Date: Wed, Feb 23, 2022 at 9:57 PM Subject: Re: [TripleO] Offline Installation Support To: <openstack-discuss@lists.openstack.org>
On 2/16/22 13:58, Anirudh Gupta wrote:
Hi Team,
We have successfully done POC on deploying my TripleO Train HA Setup with Baremetal Provisioning on Overcloud Node as well.
We would like to thank Tripleo community members for helping us and resolving all our concerns at all times.
Moving forward, we need to deploy the setup on the Lab environment for which I need some support as well.
We don't have internet in Lab machines, all that we have is access to a central server (staging) which has internet access and we can download all the requirements over there.
Queries:
* Is there any feasible method to install Undercloud and Overcloud Machines in complete offline mode? * If yes, then
1. What are the steps to download all related stuff on the staging server?
I don't know the exact steps, and I am not aware of upstream documentation page explaining this.
You will probalby want to use the 'rsync' tool to sync RDO RPM repositories and create a local repo on you staging machine. Sync packages, use `createrepo` tool to generate yum/dnf repo metadata. Then set up a webserver to make the repository available over HTTP. Search the internets for "Create local RPM repository / mirror", there are many generic guides that will help you.
For containers you need to set up a local container registry. Then I would suggest useing the `skopeo`[1] tool to sync containers from the public registry to your local registry.
2. What modifications would be required in undercloud/overcloud and other configuration files to support this?
You need to set up the undercloud to use the RPM repositries on the staging server. Put config in /etc/yum.repos.d/*.repo files. Once the overcloud is deployed you would want to add the repo config there as well.
You need to use a custom containers-prepare file when deploying the undercloud and overcloud, you must set the namespaces to point to your local registry. Something like this:
parameter_defaults: ContainerImagePrepare: - push_destination: false set: name_prefix: openstack- name_suffix: '' namespace: staging.example.com:5000/tripleotrain neutron_driver: null tag: current-tripleo ...
I would suggest generating the container prepare env file with the `openstack tripleo container image prepare` command[2] and then edit the generated file.
[1] https://github.com/containers/skopeo [2]
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deployme...
--
Hi Harald/TripleO Team, Is there any solution/work around for the problem being faced? *Ensure DNF modules have the right stream* | undercloud | item={'module': 'container-tools', 'stream': '3.0'} | error={ "ansible_loop_var": "item", "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "autoremove": false, "bugfix": false, "conf_file": null, "disable_excludes": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": [], "download_dir": null, "download_only": false, "enable_plugin": [], "enablerepo": [], "exclude": [], "install_repoquery": true, "install_weak_deps": true, "installroot": "/", "list": null, "lock_timeout": 30, "name": [ "@container-tools:3.0/common" ], "releasever": null, "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "item": { "module": "container-tools", "stream": "3.0" }, "msg": "*No group container-tools:3.0/common available*.", "results": [] } On Wed, Mar 23, 2022 at 2:45 PM Anirudh Gupta <anyrude10@gmail.com> wrote:
Hi Harald,
Thanks for sharing the steps and apologies for the late reply.
I tried setting up Local Repo Server and Registry Server on one machine. Using that I successfully deployed Openstack Ussuri Undercloud and Overcloud in an offline mode.
Now, in order to test Upgrade from USSURI to VICTORIA, I updated the repo file and podman registry at my local server for Victoria. On Undercloud , repo file content is as follows:
[tripleo] baseurl = http://30.30.30.8/software/repos/tripleo_victoria enabled = 1 gpgcheck = 0 module_hotfixes=1 name = tripleo
where 30.30.30.8 is the IP of my reposerver.
With this I have successfully updated the required packages using the command: *sudo yum update python*-tripleoclient openstack-tripleo-common openstack-tripleo-heat-templates*
Also the container image prepare file, now has the following content parameter_defaults: ContainerImagePrepare: - push_destination: true set: name_prefix: openstack- name_suffix: '' namespace: myserver.com:5000/tripleovictoria neutron_driver: ovn rhel_containers: false tag: current-tripleo tag_from_label: rdo_version
But once I run the command "*openstack undercloud upgrade*", I get the following error 2022-03-23 09:53:24,527 p=380392 u=root n=ansible | 2022-03-23 09:53:24.527073 | 5254007b-2040-558f-a68f-0000000000ac | FATAL | Ensure DNF modules have the right stream | undercloud | item={'module': 'container-tools', 'stream': '3.0'} | error={ "ansible_loop_var": "item", "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "autoremove": false, "bugfix": false, "conf_file": null, "disable_excludes": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": [], "download_dir": null, "download_only": false, "enable_plugin": [], "enablerepo": [], "exclude": [], "install_repoquery": true, "install_weak_deps": true, "installroot": "/", "list": null, "lock_timeout": 30, "name": [ "@container-tools:3.0/common" ], "releasever": null, "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "item": { "module": "container-tools", "stream": "3.0" }, "msg": "*No group container-tools:3.0/common available*.", "results": [] }
Can you please help in resolving this issue.
Regards Anirudh Gupta
On Wed, Mar 23, 2022 at 2:06 PM Lokendra Rathour < lokendrarathour@gmail.com> wrote:
---------- Forwarded message --------- From: Harald Jensas <hjensas@redhat.com> Date: Wed, Feb 23, 2022 at 9:57 PM Subject: Re: [TripleO] Offline Installation Support To: <openstack-discuss@lists.openstack.org>
On 2/16/22 13:58, Anirudh Gupta wrote:
Hi Team,
We have successfully done POC on deploying my TripleO Train HA Setup with Baremetal Provisioning on Overcloud Node as well.
We would like to thank Tripleo community members for helping us and resolving all our concerns at all times.
Moving forward, we need to deploy the setup on the Lab environment for which I need some support as well.
We don't have internet in Lab machines, all that we have is access to a central server (staging) which has internet access and we can download all the requirements over there.
Queries:
* Is there any feasible method to install Undercloud and Overcloud Machines in complete offline mode? * If yes, then
1. What are the steps to download all related stuff on the staging server?
I don't know the exact steps, and I am not aware of upstream documentation page explaining this.
You will probalby want to use the 'rsync' tool to sync RDO RPM repositories and create a local repo on you staging machine. Sync packages, use `createrepo` tool to generate yum/dnf repo metadata. Then set up a webserver to make the repository available over HTTP. Search the internets for "Create local RPM repository / mirror", there are many generic guides that will help you.
For containers you need to set up a local container registry. Then I would suggest useing the `skopeo`[1] tool to sync containers from the public registry to your local registry.
2. What modifications would be required in undercloud/overcloud and other configuration files to support this?
You need to set up the undercloud to use the RPM repositries on the staging server. Put config in /etc/yum.repos.d/*.repo files. Once the overcloud is deployed you would want to add the repo config there as well.
You need to use a custom containers-prepare file when deploying the undercloud and overcloud, you must set the namespaces to point to your local registry. Something like this:
parameter_defaults: ContainerImagePrepare: - push_destination: false set: name_prefix: openstack- name_suffix: '' namespace: staging.example.com:5000/tripleotrain neutron_driver: null tag: current-tripleo ...
I would suggest generating the container prepare env file with the `openstack tripleo container image prepare` command[2] and then edit the generated file.
[1] https://github.com/containers/skopeo [2]
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deployme...
--
Hi OpenStack Team, Facing similar problem. Any proposed solution? Thanks & Regards, Lokendra On Wed, 23 Mar 2022, 14:45 Anirudh Gupta, <anyrude10@gmail.com> wrote:
Hi Harald,
Thanks for sharing the steps and apologies for the late reply.
I tried setting up Local Repo Server and Registry Server on one machine. Using that I successfully deployed Openstack Ussuri Undercloud and Overcloud in an offline mode.
Now, in order to test Upgrade from USSURI to VICTORIA, I updated the repo file and podman registry at my local server for Victoria. On Undercloud , repo file content is as follows:
[tripleo] baseurl = http://30.30.30.8/software/repos/tripleo_victoria enabled = 1 gpgcheck = 0 module_hotfixes=1 name = tripleo
where 30.30.30.8 is the IP of my reposerver.
With this I have successfully updated the required packages using the command: *sudo yum update python*-tripleoclient openstack-tripleo-common openstack-tripleo-heat-templates*
Also the container image prepare file, now has the following content parameter_defaults: ContainerImagePrepare: - push_destination: true set: name_prefix: openstack- name_suffix: '' namespace: myserver.com:5000/tripleovictoria neutron_driver: ovn rhel_containers: false tag: current-tripleo tag_from_label: rdo_version
But once I run the command "*openstack undercloud upgrade*", I get the following error 2022-03-23 09:53:24,527 p=380392 u=root n=ansible | 2022-03-23 09:53:24.527073 | 5254007b-2040-558f-a68f-0000000000ac | FATAL | Ensure DNF modules have the right stream | undercloud | item={'module': 'container-tools', 'stream': '3.0'} | error={ "ansible_loop_var": "item", "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "autoremove": false, "bugfix": false, "conf_file": null, "disable_excludes": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": [], "download_dir": null, "download_only": false, "enable_plugin": [], "enablerepo": [], "exclude": [], "install_repoquery": true, "install_weak_deps": true, "installroot": "/", "list": null, "lock_timeout": 30, "name": [ "@container-tools:3.0/common" ], "releasever": null, "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "item": { "module": "container-tools", "stream": "3.0" }, "msg": "*No group container-tools:3.0/common available*.", "results": [] }
Can you please help in resolving this issue.
Regards Anirudh Gupta
On Wed, Mar 23, 2022 at 2:06 PM Lokendra Rathour < lokendrarathour@gmail.com> wrote:
---------- Forwarded message --------- From: Harald Jensas <hjensas@redhat.com> Date: Wed, Feb 23, 2022 at 9:57 PM Subject: Re: [TripleO] Offline Installation Support To: <openstack-discuss@lists.openstack.org>
On 2/16/22 13:58, Anirudh Gupta wrote:
Hi Team,
We have successfully done POC on deploying my TripleO Train HA Setup with Baremetal Provisioning on Overcloud Node as well.
We would like to thank Tripleo community members for helping us and resolving all our concerns at all times.
Moving forward, we need to deploy the setup on the Lab environment for which I need some support as well.
We don't have internet in Lab machines, all that we have is access to a central server (staging) which has internet access and we can download all the requirements over there.
Queries:
* Is there any feasible method to install Undercloud and Overcloud Machines in complete offline mode? * If yes, then
1. What are the steps to download all related stuff on the staging server?
I don't know the exact steps, and I am not aware of upstream documentation page explaining this.
You will probalby want to use the 'rsync' tool to sync RDO RPM repositories and create a local repo on you staging machine. Sync packages, use `createrepo` tool to generate yum/dnf repo metadata. Then set up a webserver to make the repository available over HTTP. Search the internets for "Create local RPM repository / mirror", there are many generic guides that will help you.
For containers you need to set up a local container registry. Then I would suggest useing the `skopeo`[1] tool to sync containers from the public registry to your local registry.
2. What modifications would be required in undercloud/overcloud and other configuration files to support this?
You need to set up the undercloud to use the RPM repositries on the staging server. Put config in /etc/yum.repos.d/*.repo files. Once the overcloud is deployed you would want to add the repo config there as well.
You need to use a custom containers-prepare file when deploying the undercloud and overcloud, you must set the namespaces to point to your local registry. Something like this:
parameter_defaults: ContainerImagePrepare: - push_destination: false set: name_prefix: openstack- name_suffix: '' namespace: staging.example.com:5000/tripleotrain neutron_driver: null tag: current-tripleo ...
I would suggest generating the container prepare env file with the `openstack tripleo container image prepare` command[2] and then edit the generated file.
[1] https://github.com/containers/skopeo [2]
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deployme...
--
I have never used DNF, but it seems to check for DNF to have the right modules. On Thu, Mar 24, 2022 at 12:40 PM Lokendra Rathour <lokendrarathour@gmail.com> wrote:
Hi OpenStack Team, Facing similar problem. Any proposed solution?
Thanks & Regards, Lokendra
On Wed, 23 Mar 2022, 14:45 Anirudh Gupta, <anyrude10@gmail.com> wrote:
Hi Harald,
Thanks for sharing the steps and apologies for the late reply.
I tried setting up Local Repo Server and Registry Server on one machine. Using that I successfully deployed Openstack Ussuri Undercloud and Overcloud in an offline mode.
Now, in order to test Upgrade from USSURI to VICTORIA, I updated the repo file and podman registry at my local server for Victoria. On Undercloud , repo file content is as follows:
[tripleo] baseurl = http://30.30.30.8/software/repos/tripleo_victoria enabled = 1 gpgcheck = 0 module_hotfixes=1 name = tripleo
where 30.30.30.8 is the IP of my reposerver.
With this I have successfully updated the required packages using the command: *sudo yum update python*-tripleoclient openstack-tripleo-common openstack-tripleo-heat-templates*
Also the container image prepare file, now has the following content parameter_defaults: ContainerImagePrepare: - push_destination: true set: name_prefix: openstack- name_suffix: '' namespace: myserver.com:5000/tripleovictoria neutron_driver: ovn rhel_containers: false tag: current-tripleo tag_from_label: rdo_version
But once I run the command "*openstack undercloud upgrade*", I get the following error 2022-03-23 09:53:24,527 p=380392 u=root n=ansible | 2022-03-23 09:53:24.527073 | 5254007b-2040-558f-a68f-0000000000ac | FATAL | Ensure DNF modules have the right stream | undercloud | item={'module': 'container-tools', 'stream': '3.0'} | error={ "ansible_loop_var": "item", "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "autoremove": false, "bugfix": false, "conf_file": null, "disable_excludes": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": [], "download_dir": null, "download_only": false, "enable_plugin": [], "enablerepo": [], "exclude": [], "install_repoquery": true, "install_weak_deps": true, "installroot": "/", "list": null, "lock_timeout": 30, "name": [ "@container-tools:3.0/common" ], "releasever": null, "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "item": { "module": "container-tools", "stream": "3.0" }, "msg": "*No group container-tools:3.0/common available*.", "results": [] }
Can you please help in resolving this issue.
Regards Anirudh Gupta
On Wed, Mar 23, 2022 at 2:06 PM Lokendra Rathour < lokendrarathour@gmail.com> wrote:
---------- Forwarded message --------- From: Harald Jensas <hjensas@redhat.com> Date: Wed, Feb 23, 2022 at 9:57 PM Subject: Re: [TripleO] Offline Installation Support To: <openstack-discuss@lists.openstack.org>
On 2/16/22 13:58, Anirudh Gupta wrote:
Hi Team,
We have successfully done POC on deploying my TripleO Train HA Setup with Baremetal Provisioning on Overcloud Node as well.
We would like to thank Tripleo community members for helping us and resolving all our concerns at all times.
Moving forward, we need to deploy the setup on the Lab environment for which I need some support as well.
We don't have internet in Lab machines, all that we have is access to a central server (staging) which has internet access and we can download all the requirements over there.
Queries:
* Is there any feasible method to install Undercloud and Overcloud Machines in complete offline mode? * If yes, then
1. What are the steps to download all related stuff on the staging server?
I don't know the exact steps, and I am not aware of upstream documentation page explaining this.
You will probalby want to use the 'rsync' tool to sync RDO RPM repositories and create a local repo on you staging machine. Sync packages, use `createrepo` tool to generate yum/dnf repo metadata. Then set up a webserver to make the repository available over HTTP. Search the internets for "Create local RPM repository / mirror", there are many generic guides that will help you.
For containers you need to set up a local container registry. Then I would suggest useing the `skopeo`[1] tool to sync containers from the public registry to your local registry.
2. What modifications would be required in undercloud/overcloud
and
other configuration files to support this?
You need to set up the undercloud to use the RPM repositries on the staging server. Put config in /etc/yum.repos.d/*.repo files. Once the overcloud is deployed you would want to add the repo config there as well.
You need to use a custom containers-prepare file when deploying the undercloud and overcloud, you must set the namespaces to point to your local registry. Something like this:
parameter_defaults: ContainerImagePrepare: - push_destination: false set: name_prefix: openstack- name_suffix: '' namespace: staging.example.com:5000/tripleotrain neutron_driver: null tag: current-tripleo ...
I would suggest generating the container prepare env file with the `openstack tripleo container image prepare` command[2] and then edit the generated file.
[1] https://github.com/containers/skopeo [2]
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deployme...
--
participants (3)
-
Anirudh Gupta
-
Laurent Dumont
-
Lokendra Rathour