Hi Team,
I was trying to deploy Ironic Node on Kolla Ansible Setup. Document used for reference: https://docs.openstack.org/kolla-ansible/latest/reference/bare-metal/ironic-...
Although this document says : *" Ironic works well in Kolla, though it is not thoroughly tested as part of Kolla CI, so may be subject to instability"*
We have tried 2 node Kolla Ansible *12.0.0* in order to deploy OpenStack *wallaby* release with enabled ironic for Bare-metal nodes provisioning. But facing issues in "Node Provisioning"
So, has anyone tried the Baremetal Provisioning on Koll Setup? Please share /suggest any approach to achieve this.
Hi Lokendra,
We regularly use Ironic with Kolla. Unfortunately it can be quite challenging to get working, but it is possible. tcpdump and console logs are your friends.
Regards, Mark
On Thu, 5 Aug 2021 at 12:32, Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Team,
I was trying to deploy Ironic Node on Kolla Ansible Setup. Document used for reference: https://docs.openstack.org/kolla-ansible/latest/reference/bare-metal/ironic-...
Although this document says : " Ironic works well in Kolla, though it is not thoroughly tested as part of Kolla CI, so may be subject to instability"
We have tried 2 node Kolla Ansible 12.0.0 in order to deploy OpenStack wallaby release with enabled ironic for Bare-metal nodes provisioning. But facing issues in "Node Provisioning"
So, has anyone tried the Baremetal Provisioning on Koll Setup? Please share /suggest any approach to achieve this.
-- ~ Lokendra skype: lokendrarathour
Hi Mark, Thanks for the reply. As it looks that getting ironic installed in Kolla-Ansible is not that easy. As we know that Kayobe is also using Kolla-ansible underneath, so we may have a similar line of challenges when deploying ironic over Kayobe ?
Best Regards, Lokendra
On Mon, Aug 9, 2021 at 1:46 PM Mark Goddard mark@stackhpc.com wrote:
Hi Lokendra,
We regularly use Ironic with Kolla. Unfortunately it can be quite challenging to get working, but it is possible. tcpdump and console logs are your friends.
Regards, Mark
On Thu, 5 Aug 2021 at 12:32, Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Team,
I was trying to deploy Ironic Node on Kolla Ansible Setup. Document used for reference:
https://docs.openstack.org/kolla-ansible/latest/reference/bare-metal/ironic-...
Although this document says : " Ironic works well in Kolla, though it is not thoroughly tested as
part of Kolla CI, so may be subject to instability"
We have tried 2 node Kolla Ansible 12.0.0 in order to deploy OpenStack
wallaby release with enabled ironic for Bare-metal nodes provisioning. But facing issues in "Node Provisioning"
So, has anyone tried the Baremetal Provisioning on Koll Setup? Please share /suggest any approach to achieve this.
-- ~ Lokendra skype: lokendrarathour
On Mon, Aug 9, 2021 at 10:53 AM Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Mark, Thanks for the reply. As it looks that getting ironic installed in Kolla-Ansible is not that easy. As we know that Kayobe is also using Kolla-ansible underneath, so we may have a similar line of challenges when deploying ironic over Kayobe ?
It will be the same experience, except for handling of the server provisioning layer and setting up networking for you. I suggest you try it as it gives you more out of the box and may help you spot the issue in your previous setup. Ironic works just fine with Kolla Ansible but requires more understanding of your baremetal layer than the other services. Also, do note Kayobe will use Ironic (via Bifrost) to provision your nodes so you will test Ironic from yet another angle.
-yoctozepto
Best Regards, Lokendra
On Mon, Aug 9, 2021 at 1:46 PM Mark Goddard mark@stackhpc.com wrote:
Hi Lokendra,
We regularly use Ironic with Kolla. Unfortunately it can be quite challenging to get working, but it is possible. tcpdump and console logs are your friends.
Regards, Mark
On Thu, 5 Aug 2021 at 12:32, Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Team,
I was trying to deploy Ironic Node on Kolla Ansible Setup. Document used for reference:
https://docs.openstack.org/kolla-ansible/latest/reference/bare-metal/ironic-...
Although this document says : " Ironic works well in Kolla, though it is not thoroughly tested as
part of Kolla CI, so may be subject to instability"
We have tried 2 node Kolla Ansible 12.0.0 in order to deploy
OpenStack wallaby release with enabled ironic for Bare-metal nodes provisioning. But facing issues in "Node Provisioning"
So, has anyone tried the Baremetal Provisioning on Koll Setup? Please share /suggest any approach to achieve this.
-- ~ Lokendra skype: lokendrarathour
-- ~ Lokendra www.inertiaspeaks.com www.inertiagroups.com skype: lokendrarathour
On Mon, 9 Aug 2021 at 09:52, Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Mark, Thanks for the reply. As it looks that getting ironic installed in Kolla-Ansible is not that easy. As we know that Kayobe is also using Kolla-ansible underneath, so we may have a similar line of challenges when deploying ironic over Kayobe ?
Kayobe uses Bifrost, which deploys Ironic in a standalone mode, without nova, neutron, etc. This simplifies things a bit, but of course many of the challenges of working with bare metal remain. Mark
Best Regards, Lokendra
On Mon, Aug 9, 2021 at 1:46 PM Mark Goddard mark@stackhpc.com wrote:
Hi Lokendra,
We regularly use Ironic with Kolla. Unfortunately it can be quite challenging to get working, but it is possible. tcpdump and console logs are your friends.
Regards, Mark
On Thu, 5 Aug 2021 at 12:32, Lokendra Rathour lokendrarathour@gmail.com wrote:
Hi Team,
I was trying to deploy Ironic Node on Kolla Ansible Setup. Document used for reference:
https://docs.openstack.org/kolla-ansible/latest/reference/bare-metal/ironic-...
Although this document says : " Ironic works well in Kolla, though it is not thoroughly tested as
part of Kolla CI, so may be subject to instability"
We have tried 2 node Kolla Ansible 12.0.0 in order to deploy
OpenStack wallaby release with enabled ironic for Bare-metal nodes provisioning. But facing issues in "Node Provisioning"
So, has anyone tried the Baremetal Provisioning on Koll Setup? Please share /suggest any approach to achieve this.
-- ~ Lokendra skype: lokendrarathour
-- ~ Lokendra www.inertiaspeaks.com www.inertiagroups.com skype: lokendrarathour
participants (3)
-
Lokendra Rathour
-
Mark Goddard
-
Radosław Piliszek