Trove guest agent and Rabbitmq
Hi, I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version.
From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this? Regards.
Hi Wodel, There is a management network (Neutron network) configured for communication between controller services and guest agent, you need to config in the infra router (using the network vlan) layer to make sure they can talk. --- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes) On Wed, Oct 20, 2021 at 10:30 AM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi,
I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version. From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this?
Regards.
Hi Lingxian, and thanks. Could you be more specific? What is this management network? in globals.yml this what I have in terme of networking : kolla_internal_vip_address: "10.10.3.1" kolla_internal_fqdn: "dashinternal.domain.tld" kolla_external_vip_address: "x.x.x.x" kolla_external_fqdn: "dash.domain.tld" *network_interface: "bond0"kolla_external_vip_interface: "bond1"api_interface: "bond1.30"storage_interface: "bond1.10"tunnel_interface: "bond1.40"octavia_network_interface: "{{ api_interface }}"neutron_external_interface: "bond2"* neutron_plugin_agent: "openvswitch" What is this management network? Do I have to create it? If yes how? Regards. Le mer. 20 oct. 2021 à 00:48, Lingxian Kong <anlin.kong@gmail.com> a écrit :
Hi Wodel,
There is a management network (Neutron network) configured for communication between controller services and guest agent, you need to config in the infra router (using the network vlan) layer to make sure they can talk.
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 10:30 AM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi,
I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version. From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this?
Regards.
I don't use Kolla, but the management network config in Trove is: [DEFAULT] management_networks = --- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes) On Wed, Oct 20, 2021 at 9:23 PM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi Lingxian, and thanks.
Could you be more specific? What is this management network? in globals.yml this what I have in terme of networking :
kolla_internal_vip_address: "10.10.3.1" kolla_internal_fqdn: "dashinternal.domain.tld" kolla_external_vip_address: "x.x.x.x" kolla_external_fqdn: "dash.domain.tld"
*network_interface: "bond0"kolla_external_vip_interface: "bond1"api_interface: "bond1.30"storage_interface: "bond1.10"tunnel_interface: "bond1.40"octavia_network_interface: "{{ api_interface }}"neutron_external_interface: "bond2"* neutron_plugin_agent: "openvswitch"
What is this management network? Do I have to create it? If yes how?
Regards.
Le mer. 20 oct. 2021 à 00:48, Lingxian Kong <anlin.kong@gmail.com> a écrit :
Hi Wodel,
There is a management network (Neutron network) configured for communication between controller services and guest agent, you need to config in the infra router (using the network vlan) layer to make sure they can talk.
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 10:30 AM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi,
I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version. From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this?
Regards.
Hi again, Reading, I did find that, do I have to create another provider network (internal one), or does a simple tenant routed network can do the job? I tried to create a tenant network and route it using static routes, but it didn't work for me. Regards. Le mer. 20 oct. 2021 à 20:44, Lingxian Kong <anlin.kong@gmail.com> a écrit :
I don't use Kolla, but the management network config in Trove is:
[DEFAULT] management_networks =
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 9:23 PM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi Lingxian, and thanks.
Could you be more specific? What is this management network? in globals.yml this what I have in terme of networking :
kolla_internal_vip_address: "10.10.3.1" kolla_internal_fqdn: "dashinternal.domain.tld" kolla_external_vip_address: "x.x.x.x" kolla_external_fqdn: "dash.domain.tld"
*network_interface: "bond0"kolla_external_vip_interface: "bond1"api_interface: "bond1.30"storage_interface: "bond1.10"tunnel_interface: "bond1.40"octavia_network_interface: "{{ api_interface }}"neutron_external_interface: "bond2"* neutron_plugin_agent: "openvswitch"
What is this management network? Do I have to create it? If yes how?
Regards.
Le mer. 20 oct. 2021 à 00:48, Lingxian Kong <anlin.kong@gmail.com> a écrit :
Hi Wodel,
There is a management network (Neutron network) configured for communication between controller services and guest agent, you need to config in the infra router (using the network vlan) layer to make sure they can talk.
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 10:30 AM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi,
I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version. From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this?
Regards.
Hi Wodel, What I did was created a provider vlan network and created a security group for it. The network should be able to reach RMQ of your openstack infra. Ammad On Thu, Oct 21, 2021 at 2:07 PM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi again,
Reading, I did find that, do I have to create another provider network (internal one), or does a simple tenant routed network can do the job? I tried to create a tenant network and route it using static routes, but it didn't work for me.
Regards.
Le mer. 20 oct. 2021 à 20:44, Lingxian Kong <anlin.kong@gmail.com> a écrit :
I don't use Kolla, but the management network config in Trove is:
[DEFAULT] management_networks =
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 9:23 PM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi Lingxian, and thanks.
Could you be more specific? What is this management network? in globals.yml this what I have in terme of networking :
kolla_internal_vip_address: "10.10.3.1" kolla_internal_fqdn: "dashinternal.domain.tld" kolla_external_vip_address: "x.x.x.x" kolla_external_fqdn: "dash.domain.tld"
*network_interface: "bond0"kolla_external_vip_interface: "bond1"api_interface: "bond1.30"storage_interface: "bond1.10"tunnel_interface: "bond1.40"octavia_network_interface: "{{ api_interface }}"neutron_external_interface: "bond2"* neutron_plugin_agent: "openvswitch"
What is this management network? Do I have to create it? If yes how?
Regards.
Le mer. 20 oct. 2021 à 00:48, Lingxian Kong <anlin.kong@gmail.com> a écrit :
Hi Wodel,
There is a management network (Neutron network) configured for communication between controller services and guest agent, you need to config in the infra router (using the network vlan) layer to make sure they can talk.
--- Lingxian Kong Senior Cloud Engineer (Catalyst Cloud) Trove Project Lead (OpenStack) OpenStack Cloud Provider Project Lead (Kubernetes)
On Wed, Oct 20, 2021 at 10:30 AM wodel youchi <wodel.youchi@gmail.com> wrote:
Hi,
I am trying to deploy Trove. I am using the Kolla-ansible and Openstack wallaby version. From the documentation, the Trove guest agent, which runs inside the Tove instance communicates with the trove-taskmanager via rabbitmq, how is this done?
The rabbitmq is running in the api network, the instance is running in the tunnel (tenant) network, and in my case, those networks are in different vlans, how should I configure this?
Regards.
-- Regards, Syed Ammad Ali
participants (3)
-
Ammad Syed
-
Lingxian Kong
-
wodel youchi