[RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
Hi All, I'm using a Rally (4.1.0) deployment with existing users and no admin credentials. So the command "rally env show" outputs "admin": null in the json and it's ok. But the problem is that the command "rally verify configure-verifier -reconfigure" fails with: "rally_openstack.common.credential.OpenStackCredential() argument after ** must be a mapping, not NoneType" I've been struggling with this error for a number of hours with no results :-( Any idea ? I looked for a known bug in launchpad but found nothing. Thanks, Jean-Francois
Hi All, Has anyone experienced this issue that prevents from configuring a verifier with the "rally verify configure-verifier --reconfigure" command ? Maybe someone has set up a workaround ? I tried several solutions like adding "admin": {} or adding a fake admin user to the deployment config JSON file but none of them succeeded... I'm using Rally 4.1.0 and Tempest 39.0.0 Thanks a lot, Jean-Francois
-----Original Message----- From: Jean-François TALTAVULL Sent: mercredi, 26 juin 2024 11:44 To: OpenStack Discuss <openstack-discuss@lists.openstack.org> Subject: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
Hi All,
I'm using a Rally (4.1.0) deployment with existing users and no admin credentials. So the command "rally env show" outputs "admin": null in the json and it's ok.
But the problem is that the command "rally verify configure-verifier - reconfigure" fails with: "rally_openstack.common.credential.OpenStackCredential() argument after ** must be a mapping, not NoneType"
I've been struggling with this error for a number of hours with no results :-(
Any idea ? I looked for a known bug in launchpad but found nothing.
Thanks, Jean-Francois
Hi! Unfortunately, configuring Tempest with Rally in non-admin mode was never implemented. Nevertheless, a proper error message should be added to handle this case. вт, 9 лип. 2024 р. о 11:21 Jean-François TALTAVULL < jean-francois.taltavull@elca.ch> пише:
Hi All,
Has anyone experienced this issue that prevents from configuring a verifier with the "rally verify configure-verifier --reconfigure" command ?
Maybe someone has set up a workaround ?
I tried several solutions like adding "admin": {} or adding a fake admin user to the deployment config JSON file but none of them succeeded...
I'm using Rally 4.1.0 and Tempest 39.0.0
Thanks a lot, Jean-Francois
-----Original Message----- From: Jean-François TALTAVULL Sent: mercredi, 26 juin 2024 11:44 To: OpenStack Discuss <openstack-discuss@lists.openstack.org> Subject: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
Hi All,
I'm using a Rally (4.1.0) deployment with existing users and no admin credentials. So the command "rally env show" outputs "admin": null in the json and it's ok.
But the problem is that the command "rally verify configure-verifier - reconfigure" fails with: "rally_openstack.common.credential.OpenStackCredential() argument after ** must be a mapping, not NoneType"
I've been struggling with this error for a number of hours with no results :-(
Any idea ? I looked for a known bug in launchpad but found nothing.
Thanks, Jean-Francois
-- Best regards, Andriy Kurilin.
Thanks for this clear answer. Do you have any plan to implement this feature in the not too distant future ? From: Andriy Kurilin <andr.kurilin@gmail.com> Sent: mardi, 9 juillet 2024 21:33 To: Jean-François TALTAVULL <jean-francois.taltavull@elca.ch> Cc: OpenStack Discuss <openstack-discuss@lists.openstack.org> Subject: Re: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode You don't often get email from andr.kurilin@gmail.com<mailto:andr.kurilin@gmail.com>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> EXTERNAL MESSAGE - This email comes from outside ELCA companies. Hi! Unfortunately, configuring Tempest with Rally in non-admin mode was never implemented. Nevertheless, a proper error message should be added to handle this case. вт, 9 лип. 2024 р. о 11:21 Jean-François TALTAVULL <jean-francois.taltavull@elca.ch<mailto:jean-francois.taltavull@elca.ch>> пише: Hi All, Has anyone experienced this issue that prevents from configuring a verifier with the "rally verify configure-verifier --reconfigure" command ? Maybe someone has set up a workaround ? I tried several solutions like adding "admin": {} or adding a fake admin user to the deployment config JSON file but none of them succeeded... I'm using Rally 4.1.0 and Tempest 39.0.0 Thanks a lot, Jean-Francois
-----Original Message----- From: Jean-François TALTAVULL Sent: mercredi, 26 juin 2024 11:44 To: OpenStack Discuss <openstack-discuss@lists.openstack.org<mailto:openstack-discuss@lists.openstack.org>> Subject: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
Hi All,
I'm using a Rally (4.1.0) deployment with existing users and no admin credentials. So the command "rally env show" outputs "admin": null in the json and it's ok.
But the problem is that the command "rally verify configure-verifier - reconfigure" fails with: "rally_openstack.common.credential.OpenStackCredential() argument after ** must be a mapping, not NoneType"
I've been struggling with this error for a number of hours with no results :-(
Any idea ? I looked for a known bug in launchpad but found nothing.
Thanks, Jean-Francois
-- Best regards, Andriy Kurilin.
Not really, to be honest. Rally verification component has missed love for a long time, and combining this with the general 'maintenance' status of Rally, I do not expect this feature to be implemented soon. It should not be hard to implement, but there is a lack of contributors who are willing to do that :) PS: maintenance state means that existing core contributors (me) plan to continue investing time to keep the project alive, but the roadmap misses new features. чт, 11 лип. 2024 р. о 09:37 Jean-François TALTAVULL < jean-francois.taltavull@elca.ch> пише:
Thanks for this clear answer.
Do you have any plan to implement this feature in the not too distant future ?
*From:* Andriy Kurilin <andr.kurilin@gmail.com> *Sent:* mardi, 9 juillet 2024 21:33 *To:* Jean-François TALTAVULL <jean-francois.taltavull@elca.ch> *Cc:* OpenStack Discuss <openstack-discuss@lists.openstack.org> *Subject:* Re: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
You don't often get email from andr.kurilin@gmail.com. Learn why this is important <https://aka.ms/LearnAboutSenderIdentification>
*EXTERNAL MESSAGE *- This email comes from *outside ELCA companies*.
Hi!
Unfortunately, configuring Tempest with Rally in non-admin mode was never implemented.
Nevertheless, a proper error message should be added to handle this case.
вт, 9 лип. 2024 р. о 11:21 Jean-François TALTAVULL < jean-francois.taltavull@elca.ch> пише:
Hi All,
Has anyone experienced this issue that prevents from configuring a verifier with the "rally verify configure-verifier --reconfigure" command ?
Maybe someone has set up a workaround ?
I tried several solutions like adding "admin": {} or adding a fake admin user to the deployment config JSON file but none of them succeeded...
I'm using Rally 4.1.0 and Tempest 39.0.0
Thanks a lot, Jean-Francois
-----Original Message----- From: Jean-François TALTAVULL Sent: mercredi, 26 juin 2024 11:44 To: OpenStack Discuss <openstack-discuss@lists.openstack.org> Subject: [RALLY 4.1.0] Verifier reconfigure fails when in "no admin" mode
Hi All,
I'm using a Rally (4.1.0) deployment with existing users and no admin credentials. So the command "rally env show" outputs "admin": null in the json and it's ok.
But the problem is that the command "rally verify configure-verifier - reconfigure" fails with: "rally_openstack.common.credential.OpenStackCredential() argument after ** must be a mapping, not NoneType"
I've been struggling with this error for a number of hours with no results :-(
Any idea ? I looked for a known bug in launchpad but found nothing.
Thanks, Jean-Francois
--
Best regards, Andriy Kurilin.
-- Best regards, Andriy Kurilin.
participants (2)
-
Andriy Kurilin
-
Jean-François TALTAVULL