Ussuri Octavia load balancer on OVS
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt /etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb brctl show bridge name bridge id STP enabled interfaces br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 bond10 However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443 The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14 Thanks
Hi, I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers? ~S On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled interfaces br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 bond10
However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14
Thanks
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue. On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled
interfaces
br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14
bond10
However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect
to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14
interface to the br-lbaas bridge in order to fix the connection issue
brctl addif br-lbaas eth14
Thanks
Perfect, Now try same way on 3 nodes and tell me how it goes? Because I was having issue in my environment to make it work so I used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/ Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote: Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled interfaces br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 bond10
However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14
Thanks
ok, will try to test it on 3 nodes this weekend. I see you are using the Linux bridge, thanks for sharing your solution. On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com> wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled
interfaces
br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14
bond10
However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect
to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14
interface to the br-lbaas bridge in order to fix the connection issue
brctl addif br-lbaas eth14
Thanks
Tested on 3 nodes and 1 compute node, it is working fine by adding the eth14 to the br-lbaas bridge. Satish your solution will save 1 physical interface, will try your solution using VLAN later. Thanks On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012@gmail.com> wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com> wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled
interfaces
br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14
bond10
However, I am getting the following error when creating the load
balance
octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14
Thanks
Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS? On Fri, Oct 2, 2020 at 10:17 AM pwm <pwm2012@gmail.com> wrote:
Tested on 3 nodes and 1 compute node, it is working fine by adding the eth14 to the br-lbaas bridge. Satish your solution will save 1 physical interface, will try your solution using VLAN later.
Thanks
On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012@gmail.com> wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com> wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled interfaces br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 bond10
However, I am getting the following error when creating the load balance octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14
Thanks
On all controller and compute node, run this ip link set eth14 up brctl addif br-lbaas eth14 On Sat, Oct 3, 2020 at 3:10 AM Satish Patel <satish.txt@gmail.com> wrote:
Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS?
On Fri, Oct 2, 2020 at 10:17 AM pwm <pwm2012@gmail.com> wrote:
Tested on 3 nodes and 1 compute node, it is working fine by adding the
Satish your solution will save 1 physical interface, will try your solution using VLAN later.
Thanks
On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012@gmail.com> wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using
eth14 to the br-lbaas bridge. the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com>
wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used
different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't
tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com>
wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled
interfaces
br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14
bond10
However, I am getting the following error when creating the load
balance
octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue brctl addif br-lbaas eth14
Thanks
I'm running on OVS On Sat, Oct 3, 2020 at 3:56 PM pwm <pwm2012@gmail.com> wrote:
On all controller and compute node, run this ip link set eth14 up brctl addif br-lbaas eth14
On Sat, Oct 3, 2020 at 3:10 AM Satish Patel <satish.txt@gmail.com> wrote:
Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS?
On Fri, Oct 2, 2020 at 10:17 AM pwm <pwm2012@gmail.com> wrote:
Tested on 3 nodes and 1 compute node, it is working fine by adding the
Satish your solution will save 1 physical interface, will try your solution using VLAN later.
Thanks
On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012@gmail.com> wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using
eth14 to the br-lbaas bridge. the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com>
wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I
used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't
tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com>
wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote: > > Hi, > I using the following setup for Octavia load balancer on OVS > Ansible openstack_user_config.yml > - network: > container_bridge: "br-lbaas" > container_type: "veth" > container_interface: "eth14" > host_bind_override: "eth14" > ip_from_q: "octavia" > type: "flat" > net_name: "octavia" > group_binds: > - neutron_openvswitch_agent > - octavia-worker > - octavia-housekeeping > - octavia-health-manager > > user_variables.yml > octavia_provider_network_name: "octavia" > octavia_provider_network_type: flat > octavia_neutron_management_network_name: lbaas-mgmt > > /etc/netplan/50-cloud-init.yaml > br-lbaas: > dhcp4: no > interfaces: [ bond10 ] > addresses: [] > parameters: > stp: false > forward-delay: 0 > bond10: > dhcp4: no > addresses: [] > interfaces: [ens16] > parameters: > mode: balance-tlb > > brctl show > bridge name bridge id STP enabled
interfaces
> br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 > bond10 > > However, I am getting the following error when creating the load balance > octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443 > > The Octavia api container unable to connect to the amphora instance. > Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue > brctl addif br-lbaas eth14 > > Thanks
Nice!! Sent from my iPhone
On Oct 3, 2020, at 3:56 AM, pwm <pwm2012@gmail.com> wrote:
On all controller and compute node, run this ip link set eth14 up brctl addif br-lbaas eth14
On Sat, Oct 3, 2020 at 3:10 AM Satish Patel <satish.txt@gmail.com> wrote:
Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS?
On Fri, Oct 2, 2020 at 10:17 AM pwm <pwm2012@gmail.com> wrote:
Tested on 3 nodes and 1 compute node, it is working fine by adding the eth14 to the br-lbaas bridge. Satish your solution will save 1 physical interface, will try your solution using VLAN later.
Thanks
On Thu, Oct 1, 2020 at 10:27 PM pwm <pwm2012@gmail.com> wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel <satish.txt@gmail.com> wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm <pwm2012@gmail.com> wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel <satish.txt@gmail.com> wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm <pwm2012@gmail.com> wrote: > > Hi, > I using the following setup for Octavia load balancer on OVS > Ansible openstack_user_config.yml > - network: > container_bridge: "br-lbaas" > container_type: "veth" > container_interface: "eth14" > host_bind_override: "eth14" > ip_from_q: "octavia" > type: "flat" > net_name: "octavia" > group_binds: > - neutron_openvswitch_agent > - octavia-worker > - octavia-housekeeping > - octavia-health-manager > > user_variables.yml > octavia_provider_network_name: "octavia" > octavia_provider_network_type: flat > octavia_neutron_management_network_name: lbaas-mgmt > > /etc/netplan/50-cloud-init.yaml > br-lbaas: > dhcp4: no > interfaces: [ bond10 ] > addresses: [] > parameters: > stp: false > forward-delay: 0 > bond10: > dhcp4: no > addresses: [] > interfaces: [ens16] > parameters: > mode: balance-tlb > > brctl show > bridge name bridge id STP enabled interfaces > br-lbaas 8000.d60e4e80f672 no 2ea34552_eth14 > bond10 > > However, I am getting the following error when creating the load balance > octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443 > > The Octavia api container unable to connect to the amphora instance. > Any missing configuration, cause I need to manually add in the eth14 interface to the br-lbaas bridge in order to fix the connection issue > brctl addif br-lbaas eth14 > > Thanks
participants (2)
-
pwm
-
Satish Patel