Re: [openstack-community] Octavia :; Unable to create load balancer
Hey Fabian, Can you please elaborate more about keystone settings, where in need to make changes etc.. I am new to openstack finding it difficult to resolve kind of atuck ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:22 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Hi, check your keystone auth settings. If i remember correctly there are two different sections to which require valid keystone settings. Fabian Monika Samal <monika.samal@outlook.com<mailto:monika.samal@outlook.com>> schrieb am Do., 30. Juli 2020, 21:43: Hello Michael and Amy, As suggested I checked and found below error on Octavia-api logs, but not sure how to resolve and proceed further with this. [cid:a29109eb-08ac-4f9a-92d4-2befba2cc90e] Regards, Moni ________________________________ From: Michael Johnson <johnsomor@gmail.com<mailto:johnsomor@gmail.com>> Sent: Thursday, July 30, 2020 9:41 PM To: Amy Marrich <amy@demarco.com<mailto:amy@demarco.com>> Cc: Monika Samal <monika.samal@outlook.com<mailto:monika.samal@outlook.com>>; openstack-discuss <openstack-discuss@lists.openstack.org<mailto:openstack-discuss@lists.openstack.org>>; community@lists.openstack.org<mailto:community@lists.openstack.org> <community@lists.openstack.org<mailto:community@lists.openstack.org>> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Thank you for forwarding this Amy. Hi Moni, Can you check the Octavia API process log and the horizon log files to see what is causing the "Internal Server Error"? This sounds like a configuration file problem as Amy mentioned. There should be log messages in one of those two locations that will point to the problem. Michael On Thu, Jul 30, 2020 at 6:10 AM Amy Marrich <amy@demarco.com<mailto:amy@demarco.com>> wrote:
Adding the discuss list where you might get more help, but also double check your config file for any extra spaces or typos.
Thanks,
Amy (spotz)
On Thu, Jul 30, 2020 at 6:30 AM Monika Samal <monika.samal@outlook.com<mailto:monika.samal@outlook.com>> wrote:
Hello All,
I have been following https://docs.openstack.org/kolla-ansible/latest/reference/networking/octavia... to deploy Octavia. I was successful in deployin Octavia but when I go to horizon dashboard and create loadbalancer am getting error "9876/v2.0/lbaas/loadbalancers, Internal Server Error". I have checked worker log at /var/log/kola-ansible/Octavia-worker.log and found oslo messaging was refusing connection I fixed it but still getting same error. Kindly help
Regards, Moni _______________________________________________ Community mailing list Community@lists.openstack.org<mailto:Community@lists.openstack.org> http://lists.openstack.org/cgi-bin/mailman/listinfo/community
The sections should be service_auth keystone_authtoken if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link? Fabian
Hello Fabian, http://paste.openstack.org/show/796477/ Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer The sections should be service_auth keystone_authtoken if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org<http://paste.openstack.org/> and post the link? Fabian
Hi, just to debug, could you replace the auth_type password with v3password? And do a curl against your :5000 and :35357 urls and paste the output. Fabian Monika Samal <monika.samal@outlook.com> schrieb am Do., 30. Juli 2020, 22:15:
Hello Fabian,
http://paste.openstack.org/show/796477/
Thanks, Monika ------------------------------ *From:* Fabian Zimmermann <dev.faz@gmail.com> *Sent:* Friday, July 31, 2020 1:38 AM *To:* Monika Samal <monika.samal@outlook.com> *Cc:* Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> *Subject:* Re: [openstack-community] Octavia :; Unable to create load balancer
The sections should be
service_auth keystone_authtoken
if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link?
Fabian
Hello Fabian,, http://paste.openstack.org/show/QxKv2Ai697qulp9UWTjY/ Regards, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Hi, just to debug, could you replace the auth_type password with v3password? And do a curl against your :5000 and :35357 urls and paste the output. Fabian Monika Samal <monika.samal@outlook.com<mailto:monika.samal@outlook.com>> schrieb am Do., 30. Juli 2020, 22:15: Hello Fabian, http://paste.openstack.org/show/796477/ Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com<mailto:dev.faz@gmail.com>> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com<mailto:monika.samal@outlook.com>> Cc: Michael Johnson <johnsomor@gmail.com<mailto:johnsomor@gmail.com>>; Amy Marrich <amy@demarco.com<mailto:amy@demarco.com>>; openstack-discuss <openstack-discuss@lists.openstack.org<mailto:openstack-discuss@lists.openstack.org>>; community@lists.openstack.org<mailto:community@lists.openstack.org> <community@lists.openstack.org<mailto:community@lists.openstack.org>> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer The sections should be service_auth keystone_authtoken if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org<http://paste.openstack.org/> and post the link? Fabian
Just to close the loop on this, the octavia.conf file had "project_name = admin" instead of "project_name = service" in the [service_auth] section. This was causing the keystone errors when Octavia was communicating with neutron. I don't know if that is a bug in kolla-ansible or was just a local configuration issue. Michael On Thu, Jul 30, 2020 at 1:39 PM Monika Samal <monika.samal@outlook.com> wrote:
Hello Fabian,,
http://paste.openstack.org/show/QxKv2Ai697qulp9UWTjY/
Regards, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
Hi,
just to debug, could you replace the auth_type password with v3password?
And do a curl against your :5000 and :35357 urls and paste the output.
Fabian
Monika Samal <monika.samal@outlook.com> schrieb am Do., 30. Juli 2020, 22:15:
Hello Fabian,
http://paste.openstack.org/show/796477/
Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
The sections should be
service_auth keystone_authtoken
if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link?
Fabian
Thanks a ton Michael for helping me out ________________________________ From: Michael Johnson <johnsomor@gmail.com> Sent: Friday, July 31, 2020 3:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Fabian Zimmermann <dev.faz@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Just to close the loop on this, the octavia.conf file had "project_name = admin" instead of "project_name = service" in the [service_auth] section. This was causing the keystone errors when Octavia was communicating with neutron. I don't know if that is a bug in kolla-ansible or was just a local configuration issue. Michael On Thu, Jul 30, 2020 at 1:39 PM Monika Samal <monika.samal@outlook.com> wrote:
Hello Fabian,,
http://paste.openstack.org/show/QxKv2Ai697qulp9UWTjY/
Regards, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
Hi,
just to debug, could you replace the auth_type password with v3password?
And do a curl against your :5000 and :35357 urls and paste the output.
Fabian
Monika Samal <monika.samal@outlook.com> schrieb am Do., 30. Juli 2020, 22:15:
Hello Fabian,
http://paste.openstack.org/show/796477/
Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
The sections should be
service_auth keystone_authtoken
if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link?
Fabian
After Michael suggestion I was able to create load balancer but there is error in status. [cid:de900175-3754-4942-a53d-43c78e425e62] PFB the error link: http://paste.openstack.org/show/meNZCeuOlFkfjj189noN/ ________________________________ From: Monika Samal <monika.samal@outlook.com> Sent: Monday, August 3, 2020 2:08 PM To: Michael Johnson <johnsomor@gmail.com> Cc: Fabian Zimmermann <dev.faz@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Thanks a ton Michael for helping me out ________________________________ From: Michael Johnson <johnsomor@gmail.com> Sent: Friday, July 31, 2020 3:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Fabian Zimmermann <dev.faz@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer Just to close the loop on this, the octavia.conf file had "project_name = admin" instead of "project_name = service" in the [service_auth] section. This was causing the keystone errors when Octavia was communicating with neutron. I don't know if that is a bug in kolla-ansible or was just a local configuration issue. Michael On Thu, Jul 30, 2020 at 1:39 PM Monika Samal <monika.samal@outlook.com> wrote:
Hello Fabian,,
http://paste.openstack.org/show/QxKv2Ai697qulp9UWTjY/
Regards, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
Hi,
just to debug, could you replace the auth_type password with v3password?
And do a curl against your :5000 and :35357 urls and paste the output.
Fabian
Monika Samal <monika.samal@outlook.com> schrieb am Do., 30. Juli 2020, 22:15:
Hello Fabian,
http://paste.openstack.org/show/796477/
Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
The sections should be
service_auth keystone_authtoken
if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link?
Fabian
Did you check the (nova) flavor you use in octavia. Fabian Monika Samal <monika.samal@outlook.com> schrieb am Mo., 3. Aug. 2020, 10:53:
After Michael suggestion I was able to create load balancer but there is error in status.
PFB the error link:
http://paste.openstack.org/show/meNZCeuOlFkfjj189noN/ ------------------------------ *From:* Monika Samal <monika.samal@outlook.com> *Sent:* Monday, August 3, 2020 2:08 PM *To:* Michael Johnson <johnsomor@gmail.com> *Cc:* Fabian Zimmermann <dev.faz@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> *Subject:* Re: [openstack-community] Octavia :; Unable to create load balancer
Thanks a ton Michael for helping me out ------------------------------ *From:* Michael Johnson <johnsomor@gmail.com> *Sent:* Friday, July 31, 2020 3:57 AM *To:* Monika Samal <monika.samal@outlook.com> *Cc:* Fabian Zimmermann <dev.faz@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> *Subject:* Re: [openstack-community] Octavia :; Unable to create load balancer
Just to close the loop on this, the octavia.conf file had "project_name = admin" instead of "project_name = service" in the [service_auth] section. This was causing the keystone errors when Octavia was communicating with neutron.
I don't know if that is a bug in kolla-ansible or was just a local configuration issue.
Michael
On Thu, Jul 30, 2020 at 1:39 PM Monika Samal <monika.samal@outlook.com> wrote:
Hello Fabian,,
http://paste.openstack.org/show/QxKv2Ai697qulp9UWTjY/
Regards, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:57 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>;
openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org>
Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
Hi,
just to debug, could you replace the auth_type password with v3password?
And do a curl against your :5000 and :35357 urls and paste the output.
Fabian
Monika Samal <monika.samal@outlook.com> schrieb am Do., 30. Juli 2020, 22:15:
Hello Fabian,
http://paste.openstack.org/show/796477/
Thanks, Monika ________________________________ From: Fabian Zimmermann <dev.faz@gmail.com> Sent: Friday, July 31, 2020 1:38 AM To: Monika Samal <monika.samal@outlook.com> Cc: Michael Johnson <johnsomor@gmail.com>; Amy Marrich <amy@demarco.com>; openstack-discuss <openstack-discuss@lists.openstack.org>; community@lists.openstack.org <community@lists.openstack.org> Subject: Re: [openstack-community] Octavia :; Unable to create load balancer
The sections should be
service_auth keystone_authtoken
if i read the docs correctly. Maybe you can just paste your config (remove/change passwords) to paste.openstack.org and post the link?
Fabian
participants (3)
-
Fabian Zimmermann
-
Michael Johnson
-
Monika Samal