Hi Luke, 1. I agree that DHCP is technically unnecessary for the o-hm0 interface if you can manage your address allocation on the network you are using for the lb-mgmt-net. I don't have detailed information about the Ubuntu install instructions, but I suspect it was done to simplify the IPAM to be managed by whatever is providing DHCP on the lb-mgmt-net provided (be it neutron or some other resource on a provider network). The lb-mgmt-net is simply a neutron network that the amphora management address is on. It is routable and does not require external access. The only tricky part to it is the worker, health manager, and housekeeping processes need to be reachable from the amphora, and the controllers need to reach the amphora over the network(s). There are many ways to accomplish this. 2. See my above answer. Fundamentally the lb-mgmt-net is just a neutron network that nova can use to attach an interface to the amphora instances for command and control traffic. As long as the controllers can reach TCP 9433 on the amphora, and the amphora can send UDP 5555 back to the health manager endpoints, it will work fine. 3. Octavia, with the amphora driver, does not require any special configuration in Neutron (beyond the advanced services RBAC policy being available for the neutron service account used in your octavia configuration file). The neutron_lbaas.conf and services_lbaas.conf are legacy configuration files/settings that were used for neutron-lbaas which is now end of life. See the wiki page for information on the deprecation of neutron-lbaas: https://wiki.openstack.org/wiki/Neutron/LBaaS/Deprecation. Michael On Thu, May 6, 2021 at 12:30 PM Luke Camilleri <luke.camilleri@zylacomputing.com> wrote:
Hi Michael and thanks a lot for your help on this, after following your steps the agent got deployed successfully in the amphora-image.
I have some other queries that I would like to ask mainly related to the health-manager/load-balancer network setup and IP assignment. First of all let me point out that I am using a manual installation process, and it might help others to understand the underlying infrastructure required to make this component work as expected.
1- The installation procedure contains this step:
$ sudo cp octavia/etc/dhcp/dhclient.conf /etc/dhcp/octavia
which is later on called to assign the IP to the o-hm0 interface which is connected to the lb-management network as shown below:
$ sudo dhclient -v o-hm0 -cf /etc/dhcp/octavia
Apart from having a dhcp config for a single IP seems a bit of an overkill, using these steps is injecting an additional routing table into the default namespace as shown below in my case:
# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.0.1 0.0.0.0 UG 0 0 0 o-hm0 0.0.0.0 10.X.X.1 0.0.0.0 UG 100 0 0 ensX 10.X.X.0 0.0.0.0 255.255.255.0 U 100 0 0 ensX 169.254.169.254 172.16.0.100 255.255.255.255 UGH 0 0 0 o-hm0 172.16.0.0 0.0.0.0 255.240.0.0 U 0 0 0 o-hm0
Since the load-balancer management network does not need any external connectivity (but only communication between health-manager service and amphora-agent), why is a gateway required and why isn't the IP address allocated as part of the interface creation script which is called when the service is started or stopped (example below)?
---
#!/bin/bash
set -ex
MAC=$MGMT_PORT_MAC BRNAME=$BRNAME
if [ "$1" == "start" ]; then ip link add o-hm0 type veth peer name o-bhm0 brctl addif $BRNAME o-bhm0 ip link set o-bhm0 up ip link set dev o-hm0 address $MAC *** ip addr add 172.16.0.2/12 dev o-hm0 ***ip link set o-hm0 mtu 1500 ip link set o-hm0 up iptables -I INPUT -i o-hm0 -p udp --dport 5555 -j ACCEPT elif [ "$1" == "stop" ]; then ip link del o-hm0 else brctl show $BRNAME ip a s dev o-hm0 fi
---
2- Is there a possibility to specify a fixed vlan outside of tenant range for the load balancer management network?
3- Are the configuration changes required only in neutron.conf or also in additional config files like neutron_lbaas.conf and services_lbaas.conf, similar to the vpnaas configuration?
Thanks in advance for any assistance, but its like putting together a puzzle of information :-)
On 05/05/2021 20:25, Michael Johnson wrote:
Hi Luke.
Yes, the amphora-agent will listen on 9443 in the amphorae instances. It uses TLS mutual authentication, so you can get a TLS response, but it will not let you into the API without a valid certificate. A simple "openssl s_client" is usually enough to prove that it is listening and requesting the client certificate.
I can't talk to the "openstack-octavia-diskimage-create" package you found in centos, but I can discuss how to build an amphora image using the OpenStack tools.
If you get Octavia from git or via a release tarball, we provide a script to build the amphora image. This is how we build our images for the testing gates, etc. and is the recommended way (at least from the OpenStack Octavia community) to create amphora images.
https://opendev.org/openstack/octavia/src/branch/master/diskimage-create
For CentOS 8, the command would be:
diskimage-create.sh -g stable/victoria -i centos-minimal -d 8 -s 3 (3 is the minimum disk size for centos images, you may want more if you are not offloading logs)
I just did a run on a fresh centos 8 instance: git clone https://opendev.org/openstack/octavia python3 -m venv dib source dib/bin/activate pip3 install diskimage-builder PyYAML six sudo dnf install yum-utils ./diskimage-create.sh -g stable/victoria -i centos-minimal -d 8 -s 3
This built an image.
Off and on we have had issues building CentOS images due to issues in the tools we rely on. If you run into issues with this image, drop us a note back.
Michael
On Wed, May 5, 2021 at 9:37 AM Luke Camilleri <luke.camilleri@zylacomputing.com> wrote:
Hi there, i am trying to get Octavia running on a Victoria deployment on CentOS 8. It was a bit rough getting to the point to launch an instance mainly due to the load-balancer management network and the lack of documentation (https://docs.openstack.org/octavia/victoria/install/install.html) to deploy this oN CentOS. I will try to fix this once I have my deployment up and running to help others on the way installing and configuring this :-)
At this point a LB can be launched by the tenant and the instance is spawned in the Octavia project and I can ping and SSH into the amphora instance from the Octavia node where the octavia-health-manager service is running using the IP within the same subnet of the amphoras (172.16.0.0/12).
Unfortunately I keep on getting these errors in the log file of the worker log (/var/log/octavia/worker.log):
2021-05-05 01:54:49.368 14521 WARNING octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.16.4.46', p ort=9443): Max retries exceeded with url: // (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7f83e0181550>: Failed to establish a new connection: [Errno 111] Connection ref used',))
2021-05-05 01:54:54.374 14521 ERROR octavia.amphorae.drivers.haproxy.rest_api_driver [-] Connection retries (currently set to 120) exhausted. The amphora is unavailable. Reason: HTTPSConnectionPool(host='172.16 .4.46', port=9443): Max retries exceeded with url: // (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x7f83e0181550>: Failed to establish a new connection: [Errno 111] Conne ction refused',))
2021-05-05 01:54:54.374 14521 ERROR octavia.controller.worker.v1.tasks.amphora_driver_tasks [-] Amphora compute instance failed to become reachable. This either means the compute driver failed to fully boot the instance inside the timeout interval or the instance is not reachable via the lb-mgmt-net.: octavia.amphorae.driver_exceptions.exceptions.TimeOutException: contacting the amphora timed out
obviously the instance is deleted then and the task fails from the tenant's perspective.
The main issue here is that there is no service running on port 9443 on the amphora instance. I am assuming that this is in fact the amphora-agent service that is running on the instance which should be listening on this port 9443 but the service does not seem to be up or not installed at all.
To create the image I have installed the CentOS package "openstack-octavia-diskimage-create" which provides the utility disk-image-create but from what I can conclude the amphora-agent is not being installed (thought this was done automatically by default :-( )
Can anyone let me know if the amphora-agent is what gets queried on port 9443 ?
If the agent is not installed/injected by default when building the amphora image?
The command to inject the amphora-agent into the amphora image when using the disk-image-create command?
Thanks in advance for any assistance