Yes, It;s work, the installation continues, then I found new error : TASK [vexxhost.kubernetes.kubernetes : Initialize cluster] *************************************************************************************************************** fatal: [aio1_k8s_container-77e91d86]: FAILED! => {"changed": true, "cmd": "kubeadm init --config /etc/kubernetes/kubeadm.yaml --upload-certs --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests\n", "delta": "0:02:16.422277", "end": "2024-04-19 17:37:37.723866", "msg": "non-zero return code", "rc": 1, "start": "2024-04-19 17:35:21.301589", "stderr": "W0419 17:35:21.339245 1813 initconfiguration.go:336] [config] WARNING: Ignored YAML document with GroupVersionKind kubeadm.k8s.io/v1beta3, Kind=JoinConfiguration\nW0419 17:35:30.657363 1813 checks.go:835] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended that using \"registry.k8s.io/pause:3.9\" as the CRI sandbox image.\nerror execution phase wait-control-plane: couldn't initialize a Kubernetes cluster\nTo see the stack trace of this error execute with --v=5 or higher", "stderr_lines": ["W0419 17:35:21.339245 1813 initconfiguration.go:336] [config] WARNING: Ignored YAML document with GroupVersionKind kubeadm.k8s.io/v1beta3, Kind=JoinConfiguration", "W0419 17:35:30.657363 1813 checks.go:835] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended that using \"registry.k8s.io/pause:3.9\" as the CRI sandbox image.", "error execution phase wait-control-plane: couldn't initialize a Kubernetes cluster", "To see the stack trace of this error execute with --v=5 or higher"], "stdout": "[init] Using Kubernetes version: v1.28.4\n[preflight] Running pre-flight checks\n[preflight] Pulling images required for setting up a Kubernetes cluster\n[preflight] This might take a minute or two, depending on the speed of your internet connection\n[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'\n[certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n[certs] Generating \"ca\" certificate and key\n[certs] Generating \"apiserver\" certificate and key\n[certs] apiserver serving cert is signed for DNS names [aio1-k8s-container-77e91d86 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.29.236.157 172.29.236.101]\n[certs] Generating \"apiserver-kubelet-client\" certificate and key\n[certs] Generating \"front-proxy-ca\" certificate and key\n[certs] Generating \"front-proxy-client\" certificate and key\n[certs] Generating \"etcd/ca\" certificate and key\n[certs] Generating \"etcd/server\" certificate and key\n[certs] etcd/server serving cert is signed for DNS names [aio1-k8s-container-77e91d86 localhost] and IPs [172.29.236.157 127.0.0.1 ::1]\n[certs] Generating \"etcd/peer\" certificate and key\n[certs] etcd/peer serving cert is signed for DNS names [aio1-k8s-container-77e91d86 localhost] and IPs [172.29.236.157 127.0.0.1 ::1]\n[certs] Generating \"etcd/healthcheck-client\" certificate and key\n[certs] Generating \"apiserver-etcd-client\" certificate and key\n[certs] Generating \"sa\" key and public key\n[kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n[kubeconfig] Writing \"admin.conf\" kubeconfig file\n[kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n[kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n[kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n[etcd] Creating static Pod manifest for local etcd in \"/etc/kubernetes/manifests\"\n[control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n[control-plane] Creating static Pod manifest for \"kube-apiserver\"\n[control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n[control-plane] Creating static Pod manifest for \"kube-scheduler\"\n[kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n[kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n[kubelet-start] Starting the kubelet\n[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\". This can take up to 4m0s\n[kubelet-check] Initial timeout of 40s passed.\n[kubelet-check] It seems like the kubelet isn't running or healthy.\n[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.\n[kubelet-check] It seems like the kubelet isn't running or healthy.\n[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.\n[kubelet-check] It seems like the kubelet isn't running or healthy.\n[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.\n[kubelet-check] It seems like the kubelet isn't running or healthy.\n[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.\n[kubelet-check] It seems like the kubelet isn't running or healthy.\n[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.\n\nUnfortunately, an error has occurred:\n\ttimed out waiting for the condition\n\nThis error is likely caused by:\n\t- The kubelet is not running\n\t- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)\n\nIf you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:\n\t- 'systemctl status kubelet'\n\t- 'journalctl -xeu kubelet'\n\nAdditionally, a control plane component may have crashed or exited when started by the container runtime.\nTo troubleshoot, list all containers using your preferred container runtimes CLI.\nHere is one example how you may list all running Kubernetes containers by using crictl:\n\t- 'crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock ps -a | grep kube | grep -v pause'\n\tOnce you have found the failing container, you can inspect its logs with:\n\t- 'crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock logs CONTAINERID'", "stdout_lines": ["[init] Using Kubernetes version: v1.28.4", "[preflight] Running pre-flight checks", "[preflight] Pulling images required for setting up a Kubernetes cluster", "[preflight] This might take a minute or two, depending on the speed of your internet connection", "[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'", "[certs] Using certificateDir folder \"/etc/kubernetes/pki\"", "[certs] Generating \"ca\" certificate and key", "[certs] Generating \"apiserver\" certificate and key", "[certs] apiserver serving cert is signed for DNS names [aio1-k8s-container-77e91d86 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.29.236.157 172.29.236.101]", "[certs] Generating \"apiserver-kubelet-client\" certificate and key", "[certs] Generating \"front-proxy-ca\" certificate and key", "[certs] Generating \"front-proxy-client\" certificate and key", "[certs] Generating \"etcd/ca\" certificate and key", "[certs] Generating \"etcd/server\" certificate and key", "[certs] etcd/server serving cert is signed for DNS names [aio1-k8s-container-77e91d86 localhost] and IPs [172.29.236.157 127.0.0.1 ::1]", "[certs] Generating \"etcd/peer\" certificate and key", "[certs] etcd/peer serving cert is signed for DNS names [aio1-k8s-container-77e91d86 localhost] and IPs [172.29.236.157 127.0.0.1 ::1]", "[certs] Generating \"etcd/healthcheck-client\" certificate and key", "[certs] Generating \"apiserver-etcd-client\" certificate and key", "[certs] Generating \"sa\" key and public key", "[kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"", "[kubeconfig] Writing \"admin.conf\" kubeconfig file", "[kubeconfig] Writing \"kubelet.conf\" kubeconfig file", "[kubeconfig] Writing \"controller-manager.conf\" kubeconfig file", "[kubeconfig] Writing \"scheduler.conf\" kubeconfig file", "[etcd] Creating static Pod manifest for local etcd in \"/etc/kubernetes/manifests\"", "[control-plane] Using manifest folder \"/etc/kubernetes/manifests\"", "[control-plane] Creating static Pod manifest for \"kube-apiserver\"", "[control-plane] Creating static Pod manifest for \"kube-controller-manager\"", "[control-plane] Creating static Pod manifest for \"kube-scheduler\"", "[kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"", "[kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"", "[kubelet-start] Starting the kubelet", "[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\". This can take up to 4m0s", "[kubelet-check] Initial timeout of 40s passed.", "[kubelet-check] It seems like the kubelet isn't running or healthy.", "[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.", "[kubelet-check] It seems like the kubelet isn't running or healthy.", "[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.", "[kubelet-check] It seems like the kubelet isn't running or healthy.", "[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.", "[kubelet-check] It seems like the kubelet isn't running or healthy.", "[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.", "[kubelet-check] It seems like the kubelet isn't running or healthy.", "[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get \"http://localhost:10248/healthz\": dial tcp [::1]:10248: connect: connection refused.", "", "Unfortunately, an error has occurred:", "\ttimed out waiting for the condition", "", "This error is likely caused by:", "\t- The kubelet is not running", "\t- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)", "", "If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:", "\t- 'systemctl status kubelet'", "\t- 'journalctl -xeu kubelet'", "", "Additionally, a control plane component may have crashed or exited when started by the container runtime.", "To troubleshoot, list all containers using your preferred container runtimes CLI.", "Here is one example how you may list all running Kubernetes containers by using crictl:", "\t- 'crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock ps -a | grep kube | grep -v pause'", "\tOnce you have found the failing container, you can inspect its logs with:", "\t- 'crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock logs CONTAINERID'"]} Then I change manually cgroupDriver from systemd to cgroupfs, after that installation process continues and stuck again with this error : TASK [vexxhost.kubernetes.kubernetes : Allow workload on control plane node] ********************************************************************************************* An exception occurred during task execution. To see the full traceback, use -vvv. The error was: urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='172.29.236.101', port=6443): Max retries exceeded with url: /version (Caused by SSLError(SSLEOFError(8, '[SSL: UNEXPECTED_EOF_WHILE_READING] EOF occurred in violation of protocol (_ssl.c:1007)'))) If I check from systemctl status kubelet, these the logs : kubelet.go:1511] "Failed to start ContainerManager" err="[open /proc/sys/kernel/panic: read-only file system, open /proc/sys/kernel/panic_on_oops: read-only file system, open /proc/sys/vm/overcommit_memory: read-only file system]" Is this because the lxc config is still not rw so it happens like that?