The output in logfile 29a37aff-f1f6-46b3-8541-887491c6cfe8-k8s-cluster3-dcu52bgzpbuu-kube_masters-ocfrn2ikpcgd-0-32tmkqgdq7wl-master_config-gihyfv3wlyzd is incomplete.There should be the installation and configuration of many other things that are missing. Also it looks that hyperkube is not installed.Can you check the response of "podman ps" command on master nodes.AmmadOn Thu, Aug 26, 2021 at 11:30 AM Karera Tony <tonykarera@gmail.com> wrote:Here is the beginning of the LogStarting to run kube-apiserver-to-kubelet-role
+ echo 'Waiting for Kubernetes API...'
Waiting for Kubernetes API...
++ kubectl get --raw=/healthz
The connection to the server localhost:8080 was refused - did you specify the right host or port?
+ '[' ok = '' ']'RegardsTony KareraOn Thu, Aug 26, 2021 at 7:53 AM Bharat Kunwar <bharat@stackhpc.com> wrote:I assume these are from the master nodes? Can you share the logs shortly after creation rather than when it times out? I think there is some missing logs from the top.Sent from my iPhoneOn 26 Aug 2021, at 06:14, Karera Tony <tonykarera@gmail.com> wrote:Hello Guys,Attached are the two logs from the /var/log/heat-config/heat-config-script directoryRegardsTony KareraOn Thu, Aug 26, 2021 at 5:59 AM Karera Tony <tonykarera@gmail.com> wrote:Dear Sir,You are right.I am getting this errorkubectl get --raw=/healthz
The connection to the server localhost:8080 was refused - did you specify the right host or port?RegardsTony KareraOn Wed, Aug 25, 2021 at 10:55 PM Bharat Kunwar <bharat@stackhpc.com> wrote:I’d check the logs under /var/log/heat-config.Sent from my iPhoneOn 25 Aug 2021, at 19:39, Karera Tony <tonykarera@gmail.com> wrote:DeaR Ammad,I was able to make the communication work and the Worker nodes were created as well but the cluster failed.I logged in to the master node and there was no error but below are the error when I run systemctl status heat-container-agent on the worker noed.Aug 25 17:52:24 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:52:55 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:53:26 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:53:57 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:54:28 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:54:59 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:55:29 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:56:00 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:56:31 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. Skipping
Aug 25 17:57:02 cluster1-fmkpva3nozf7-node-0 podman[2268]: /var/lib/os-collect-config/local-data not found. SkippingRegardsTony KareraOn Wed, Aug 25, 2021 at 10:38 AM Ammad Syed <syedammad83@gmail.com> wrote:Yes, keystone, Heat, Barbicane and magnum public endpoints must be reachable from master and worker nodes.You can use below guide for the reference as well.On Wed, Aug 25, 2021 at 12:08 PM Karera Tony <tonykarera@gmail.com> wrote:Hello Ammad,I have deployed using the given image but I think there is an issue with keystone as per the screen shot below when I checked the master node's heat-container-agent status<image.png>RegardsTony KareraOn Wed, Aug 25, 2021 at 8:28 AM Karera Tony <tonykarera@gmail.com> wrote:Hello Ammad,I actually first used that one and it was also getting stuck.I will try this one again and update you with the Logs though.RegardsTony KareraOn Wed, Aug 25, 2021 at 8:25 AM Ammad Syed <syedammad83@gmail.com> wrote:It seems from the logs that you are using fedora atomic. Can you try with FCOS 32 image.AmmadOn Wed, Aug 25, 2021 at 11:20 AM Karera Tony <tonykarera@gmail.com> wrote:Hello Sir,Attached is the Log fileRegardsTony KareraOn Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83@gmail.com> wrote:Hi Karera,Can you share us the full log file.AmmadOn Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera@gmail.com> wrote:Hello Guys,Thanks a lot for the help but unfortunately I dont see much information in the log file indicating a failure apart from the log that keeps appearing.<image.png>RegardsTony KareraOn Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser@vexxhost.com> wrote:Also check out /var/log/cloud-init.log :)
On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83@gmail.com> wrote:
>
> Then check journalctl -xe or status of heat agent service status.
>
>
> Ammad
> On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera@gmail.com> wrote:
>>
>> Hello Ammad,
>>
>> There is no directory or log relevant to heat in the /var/log directory
>>
>> Regards
>>
>> Tony Karera
>>
>>
>>
>>
>> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83@gmail.com> wrote:
>>>
>>> Hi Karera,
>>>
>>> Login to master node and check the logs of heat agent in var log. There must be something the cluster is stucking somewhere in creating.
>>>
>>> Ammad
>>>
>>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera@gmail.com> wrote:
>>>>
>>>> Hello Ammad,
>>>>
>>>> I had done as explained and it worked upto a certain point. The master node was created but the cluster remained in Creation in progress for over an hour and failed with error below
>>>>
>>>> Stack Faults
>>>> as follows:
>>>> default-master
>>>> Timed out
>>>> default-worker
>>>> Timed out
>>>>
>>>>
>>>> Regards
>>>>
>>>> Tony Karera
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83@gmail.com> wrote:
>>>>>
>>>>> Hi Tony,
>>>>>
>>>>> You can try by creating your private vxlan network prior to deployment of cluster and explicitly create your cluster in vxlan network.
>>>>>
>>>>> --fixed-network private --fixed-subnet private-subnet
>>>>>
>>>>> You can specify above while creating a cluster.
>>>>>
>>>>> Ammad
>>>>>
>>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera@gmail.com> wrote:
>>>>>>
>>>>>> Hello MOhamed,
>>>>>>
>>>>>> I think the Kubernetes cluster is ok but it when I deploy it, It creates a fixed network using vlan which I am not using for internal networks.
>>>>>>
>>>>>> When I create a a vxlan Network and use it in the cluster creation, It fails. Is there a trick around this ?
>>>>>> Regards
>>>>>>
>>>>>> Tony Karera
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong@catalyst.net.nz> wrote:
>>>>>>>
>>>>>>> Oooh, are you using Swarm? I don't think that driver is well maintained. I didn't see any interest in the last 4 years since I involved in the Magnum project. If there is no specific reason, I would suggest go for k8s.
>>>>>>>
>>>>>>>
>>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>>>
>>>>>>> Please keep replies on list so others can help too.
>>>>>>>
>>>>>>> I don’t know how well tested the Swarm driver is at this point. I believe most Magnum users are using it for Kubernetes only.
>>>>>>>
>>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera@gmail.com> wrote:
>>>>>>>>
>>>>>>>> Hello Naser,
>>>>>>>>
>>>>>>>> Please check below.
>>>>>>>>
>>>>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>>>>>>> --image fedora-atomic-latest \
>>>>>>>> --external-network External_1700\
>>>>>>>> --dns-nameserver 8.8.8.8 \
>>>>>>>> --master-flavor m1.small \
>>>>>>>> --flavor m1.small \
>>>>>>>> --coe swarm
>>>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>>> --cluster-template swarm-cluster-template \
>>>>>>>> --master-count 1 \
>>>>>>>> --node-count 2 \
>>>>>>>> --keypair Newkey
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Tony Karera
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <mnaser@vexxhost.com> wrote:
>>>>>>>>>
>>>>>>>>> What does your cluster template and cluster create command look like?
>>>>>>>>>
>>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <tonykarera@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Hello Wang,
>>>>>>>>>>
>>>>>>>>>> Thanks for the feedback.
>>>>>>>>>>
>>>>>>>>>> Unfortunately Octavia is not deployed in my environment (at least not yet) and LB is not enabled on either the cluster template or the cluster itself.
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> Tony Karera
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <feilong@catalyst.net.nz> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi Karera,
>>>>>>>>>>>
>>>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try to not disable the LB and see how it goes?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hello Team,
>>>>>>>>>>>
>>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum, however when I create a cluster I get the error below.
>>>>>>>>>>>
>>>>>>>>>>> Status Reason
>>>>>>>>>>> ERROR: Property error: : resources.api_lb.properties: : Property allowed_cidrs not assigned
>>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled load balancer while creating the cluster.
>>>>>>>>>>>
>>>>>>>>>>> Regards
>>>>>>>>>>>
>>>>>>>>>>> Tony Karera
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Cheers & Best regards,
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>>>> Head of Research & Development
>>>>>>>>>>>
>>>>>>>>>>> Catalyst Cloud
>>>>>>>>>>> Aotearoa's own
>>>>>>>>>>>
>>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>>>>>>
>>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Mohammed Naser
>>>>>>>>> VEXXHOST, Inc.
>>>>>>>
>>>>>>> --
>>>>>>> Mohammed Naser
>>>>>>> VEXXHOST, Inc.
>>>>>>>
>>>>>>> --
>>>>>>> Cheers & Best regards,
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>> Head of Research & Development
>>>>>>>
>>>>>>> Catalyst Cloud
>>>>>>> Aotearoa's own
>>>>>>>
>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>>
>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>> ------------------------------------------------------------------------------
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Regards,
>>>>>
>>>>>
>>>>> Syed Ammad Ali
>>>
>>>
>>>
>>> --
>>> Regards,
>>>
>>>
>>> Syed Ammad Ali
>
> --
> Regards,
>
>
> Syed Ammad Ali
--
Mohammed Naser
VEXXHOST, Inc.
--Regards,Syed Ammad Ali--Regards,Syed Ammad Ali--Regards,Syed Ammad Ali<29a37aff-f1f6-46b3-8541-887491c6cfe8-k8s-cluster3-dcu52bgzpbuu-kube_masters-ocfrn2ikpcgd-0-32tmkqgdq7wl-master_config-gihyfv3wlyzd.log><6fca39b1-8eda-4786-8424-e5b04434cce7-k8s-cluster3-dcu52bgzpbuu-kube_cluster_config-aht4it6p7wfk.log>--Regards,Syed Ammad Ali