It seems from the logs that you are using fedora atomic. Can you try with FCOS 32 image. https://builds.coreos.fedoraproject.org/prod/streams/stable/builds/32.202010... Ammad On Wed, Aug 25, 2021 at 11:20 AM Karera Tony <tonykarera@gmail.com> wrote:
Hello Sir,
Attached is the Log file
Regards
Tony Karera
On Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83@gmail.com> wrote:
Hi Karera,
Can you share us the full log file.
Ammad
On Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera@gmail.com> wrote:
Hello Guys,
Thanks a lot for the help but unfortunately I dont see much information in the log file indicating a failure apart from the log that keeps appearing.
[image: image.png]
Regards
Tony Karera
On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser@vexxhost.com> wrote:
Also check out /var/log/cloud-init.log :)
On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83@gmail.com> wrote:
Then check journalctl -xe or status of heat agent service status.
Ammad On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera@gmail.com>
Hello Ammad,
There is no directory or log relevant to heat in the /var/log
Regards
Tony Karera
On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83@gmail.com>
wrote:
> > Hi Karera, > > Login to master node and check the logs of heat agent in var log. There must be something the cluster is stucking somewhere in creating. > > Ammad > > On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera@gmail.com> wrote: >> >> Hello Ammad, >> >> I had done as explained and it worked upto a certain point. The master node was created but the cluster remained in Creation in progress for over an hour and failed with error below >> >> Stack Faults >> as follows: >> default-master >> Timed out >> default-worker >> Timed out >> >> >> Regards >> >> Tony Karera >> >> >> >> >> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83@gmail.com> wrote: >>> >>> Hi Tony, >>> >>> You can try by creating your private vxlan network prior to deployment of cluster and explicitly create your cluster in vxlan network. >>> >>> --fixed-network private --fixed-subnet private-subnet >>> >>> You can specify above while creating a cluster. >>> >>> Ammad >>> >>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony < tonykarera@gmail.com> wrote: >>>> >>>> Hello MOhamed, >>>> >>>> I think the Kubernetes cluster is ok but it when I deploy it, It creates a fixed network using vlan which I am not using for internal networks. >>>> >>>> When I create a a vxlan Network and use it in the cluster creation, It fails. Is there a trick around this ? >>>> Regards >>>> >>>> Tony Karera >>>> >>>> >>>> >>>> >>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong@catalyst.net.nz> wrote: >>>>> >>>>> Oooh, are you using Swarm? I don't think that driver is well
wrote: directory maintained. I didn't see any interest in the last 4 years since I involved in the Magnum project. If there is no specific reason, I would suggest go for k8s.
>>>>> >>>>> >>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote: >>>>> >>>>> Please keep replies on list so others can help too. >>>>> >>>>> I don’t know how well tested the Swarm driver is at this point. I believe most Magnum users are using it for Kubernetes only. >>>>> >>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony < tonykarera@gmail.com> wrote: >>>>>> >>>>>> Hello Naser, >>>>>> >>>>>> Please check below. >>>>>> >>>>>> openstack coe cluster template create swarm-cluster-template1 \ >>>>>> --image fedora-atomic-latest \ >>>>>> --external-network External_1700\ >>>>>> --dns-nameserver 8.8.8.8 \ >>>>>> --master-flavor m1.small \ >>>>>> --flavor m1.small \ >>>>>> --coe swarm >>>>>> openstack coe cluster create swarm-cluster \ >>>>>> --cluster-template swarm-cluster-template \ >>>>>> --master-count 1 \ >>>>>> --node-count 2 \ >>>>>> --keypair Newkey >>>>>> >>>>>> Regards >>>>>> >>>>>> Tony Karera >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser < mnaser@vexxhost.com> wrote: >>>>>>> >>>>>>> What does your cluster template and cluster create command look like? >>>>>>> >>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony < tonykarera@gmail.com> wrote: >>>>>>>> >>>>>>>> Hello Wang, >>>>>>>> >>>>>>>> Thanks for the feedback. >>>>>>>> >>>>>>>> Unfortunately Octavia is not deployed in my environment (at least not yet) and LB is not enabled on either the cluster template or the cluster itself. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Tony Karera >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong < feilong@catalyst.net.nz> wrote: >>>>>>>>> >>>>>>>>> Hi Karera, >>>>>>>>> >>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try to not disable the LB and see how it goes? >>>>>>>>> >>>>>>>>> >>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote: >>>>>>>>> >>>>>>>>> Hello Team, >>>>>>>>> >>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum, however when I create a cluster I get the error below. >>>>>>>>> >>>>>>>>> Status Reason >>>>>>>>> ERROR: Property error: : resources.api_lb.properties: : Property allowed_cidrs not assigned >>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled load balancer while creating the cluster. >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> >>>>>>>>> Tony Karera >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Cheers & Best regards, >>>>>>>>>
>>>>>>>>> Feilong Wang (王飞龙) (he/him) >>>>>>>>> Head of Research & Development >>>>>>>>> >>>>>>>>> Catalyst Cloud >>>>>>>>> Aotearoa's own >>>>>>>>> >>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz >>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand >>>>>>>>> >>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only. >>>>>>>>> It may contain privileged, confidential or copyright information. If you are >>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this >>>>>>>>> email or its attachments is unauthorised. If you have received this email in >>>>>>>>> error, please reply via email or call +64 21 0832 6348. >>>>>>>>>
>>>>>>> >>>>>>> -- >>>>>>> Mohammed Naser >>>>>>> VEXXHOST, Inc. >>>>> >>>>> -- >>>>> Mohammed Naser >>>>> VEXXHOST, Inc. >>>>> >>>>> -- >>>>> Cheers & Best regards, >>>>>
>>>>> Feilong Wang (王飞龙) (he/him) >>>>> Head of Research & Development >>>>> >>>>> Catalyst Cloud >>>>> Aotearoa's own >>>>> >>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz >>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand >>>>> >>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only. >>>>> It may contain privileged, confidential or copyright information. If you are >>>>> not the named recipient, any use, reliance upon, disclosure or copying of this >>>>> email or its attachments is unauthorised. If you have received this email in >>>>> error, please reply via email or call +64 21 0832 6348. >>>>>
>>> >>> >>> >>> -- >>> Regards, >>> >>> >>> Syed Ammad Ali > > > > -- > Regards, > > > Syed Ammad Ali
-- Regards,
Syed Ammad Ali
-- Mohammed Naser VEXXHOST, Inc.
-- Regards,
Syed Ammad Ali
-- Regards, Syed Ammad Ali
