Dear All, I am new to this, installed rocky on centos 7 with 2 node controller and compute nodes, followed https://docs.openstack.org/neutron/rocky/install/environment-networking-cont... as mentioned in the document used vxlan and the Networking option 2: Self service network and used linuxbridge, verified all the steps as mentioned in the document and all things are working fine but i am unable to access the internet in instances. The network layout image attached herewith for reference there are two ports, one is for management and another is a provider network through which the internet is accessible. The provider network is 10.1.0.0/16 and the gateway is 10.1.1.1 which I have set in the external network.. When i run # ip netns command on controller node it shows qdhcp and qrouter [root@controller ~]# ip netns qrouter-2f84ff08-7293-4822-a4c1-57278d80f1cf (id: 2) qdhcp-186cc689-267b-49ca-90a7-b312fd0367f3 (id: 1) qdhcp-513292db-3eb8-4902-974f-4bb9c4757652 (id: 0) but when I run # ip netns command on compute it shows nothing. [root@controller ~]# openstack network agent list +--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+ | ID | Agent Type | Host | Availability Zone | Alive | State | Binary | +--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+ | 0286adac-2a32-4866-8b75-95f190c2c310 | Linux bridge agent | compute1 | None | :-) | UP | neutron-linuxbridge-agent | | 47728860-d7b0-4b15-b3dc-1f8a6bf81125 | Metadata agent | controller | None | :-) | UP | neutron-metadata-agent | | 4957d1b2-ea33-4034-9869-8518438416b0 | L3 agent | controller | nova | :-) | UP | neutron-l3-agent | | a81e4138-0190-41ef-b0a1-bd1b66c01343 | DHCP agent | controller | nova | :-) | UP | neutron-dhcp-agent | | ea43868d-8394-4cf5-a104-edc5ecbaff9e | Linux bridge agent | controller | None | :-) | UP | neutron-linuxbridge-agent | +--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+ Is there any need to create br-int or br-ex on nodes because that is not mentioned in the link which i have followed, if need kindly guide the steps to do that and on which node these steps need to follow.
