Hi Rodolfo,
you helped a lot. I managed configure this, manually. Just for future reference let me write down what I did. - First I already had the interface br-ex2 configured and correctly assigned physical interfaces in it - I added the bridge mappings to the OVN DB: ovs-vsctl set open . external-ids:ovn-bridge-mappings=datacentre:br-ex,m-storage:br-ex2
- I added my nw m-storage to ml2_conf.ini: [ml2_type_vlan] network_vlan_ranges=datacentre:1:2700,m-storage:3700:4000
[ml2_type_flat] flat_networks=datacentre,m-storage
- I restarted the neutron service - since I already had the m-storage nw created in openstack, but as provider "datacenter" and I already had instance ports using it (but it was not working), I had to create a new network and subnet. Delete the original ports and recreate and reassign it to the instances.
If I may, now I have two questions: 1. Shouldn't I also define this in ml2_conf.ini [ovs] bridge_mappings = datacentre:br-ex,m-storage:br-ex2
or is the setting of the vswitch register via ovs-vsctl persistent between redeployments or reboots?
2. Which parameters in tripleo-heat-templates sets the above ml2_conf.ini? I found these params: NeutronFlatNetworks NeutronNetworkVLANRanges NeutronBridgeMappings
Thanks for your help
Tomas
ut 7. 3. 2023 o 10:13 Rodolfo Alonso Hernandez ralonsoh@redhat.com napísal(a):
Hello Tomáš:
You need to follow the steps in [1]:
- You need to create the new physical bridge "br-ex2".
- Then you need to add to the bridge the physical interface.
- In the compute node you need to add the bridge mappings to the OVN
database Open vSwitch register
- In the controller, you need to add the reference for this second
provider network in "flat_networks" and "network_vlan_ranges" (in the ml2.ini file). Then you need to restart the Neutron server to read these new parameters (this step is not mentioned in this link). $ cat ./etc/neutron/plugins/ml2/ml2_conf.ini [ml2_type_flat] flat_networks = public,public2 [ml2_type_vlan] network_vlan_ranges = public:11:200,public2:11:200
Regards.
[1] https://docs.openstack.org/networking-ovn/pike/admin/refarch/provider-networ...
On Tue, Mar 7, 2023 at 12:33 AM Tomáš Bredár tomas.bredar@gmail.com wrote:
Hi,
I have a running production OpenStack deployment - version Wallaby installed using TripleO. I'm using the default OVN/OVS networking. For provider networks I have two bridges on the compute nodes br-ex and br-ex2. Instances mainly use br-ex for provider networks, but there are some instances which started using a provider network which should be mapped to br-ex2, however I didn't specify "bridge_mappings" on ml2_conf.ini, so the traffic wants to flow through the default datacentre:br-ex. My questions is, what services should I restart on the controller and compute nodes after defining bridge_mappings in [ovs] in ml2_conf.ini. And if this operation is safe and if the instances already using br-ex will lose connectivity?
Thanks for your help
Tomas