On all controller and compute node, run this ip link set eth14 up brctl addif br-lbaas eth14
On Sat, Oct 3, 2020 at 3:10 AM Satish Patel satish.txt@gmail.com wrote:
Nice, how did you add eth14 to br-lbaas bridge? Are you running OVS?
On Fri, Oct 2, 2020 at 10:17 AM pwm pwm2012@gmail.com wrote:
Tested on 3 nodes and 1 compute node, it is working fine by adding the
eth14 to the br-lbaas bridge.
Satish your solution will save 1 physical interface, will try your
solution using VLAN later.
Thanks
On Thu, Oct 1, 2020 at 10:27 PM pwm pwm2012@gmail.com wrote:
ok, will try to test it on 3 nodes this weekend. I see you are using
the Linux bridge, thanks for sharing your solution.
On Tue, Sep 29, 2020 at 10:01 PM Satish Patel satish.txt@gmail.com
wrote:
Perfect,
Now try same way on 3 nodes and tell me how it goes?
Because I was having issue in my environment to make it work so I used
different method which is here on my blog https://satishdotpatel.github.io//openstack-ansible-octavia/
Sent from my iPhone
On Sep 29, 2020, at 8:27 AM, pwm pwm2012@gmail.com wrote:
Hi, I'm testing on AIO before moving to a 3 nodes controller. Haven't
tested on 3 nodes controller yet but I do think it will get the same issue.
On Tue, Sep 29, 2020 at 3:43 AM Satish Patel satish.txt@gmail.com
wrote:
Hi,
I was dealing with the same issue a few weeks back so curious are you having this problem on AIO or 3 node controllers?
~S
On Sun, Sep 27, 2020 at 10:27 AM pwm pwm2012@gmail.com wrote:
Hi, I using the following setup for Octavia load balancer on OVS Ansible openstack_user_config.yml - network: container_bridge: "br-lbaas" container_type: "veth" container_interface: "eth14" host_bind_override: "eth14" ip_from_q: "octavia" type: "flat" net_name: "octavia" group_binds: - neutron_openvswitch_agent - octavia-worker - octavia-housekeeping - octavia-health-manager
user_variables.yml octavia_provider_network_name: "octavia" octavia_provider_network_type: flat octavia_neutron_management_network_name: lbaas-mgmt
/etc/netplan/50-cloud-init.yaml br-lbaas: dhcp4: no interfaces: [ bond10 ] addresses: [] parameters: stp: false forward-delay: 0 bond10: dhcp4: no addresses: [] interfaces: [ens16] parameters: mode: balance-tlb
brctl show bridge name bridge id STP enabled
interfaces
br-lbaas 8000.d60e4e80f672 no
2ea34552_eth14
bond10
However, I am getting the following error when creating the load
balance
octavia.amphorae.drivers.haproxy.rest_api_driver [-] Could not
connect to instance. Retrying.: requests.exceptions.ConnectionError: HTTPSConnectionPool(host='172.29.233.47', port=9443
The Octavia api container unable to connect to the amphora instance. Any missing configuration, cause I need to manually add in the
eth14 interface to the br-lbaas bridge in order to fix the connection issue
brctl addif br-lbaas eth14
Thanks