Hi, all! We are experimenting with bluefield-2 and neutron-openvswith-agent on it and have a big problem – all our egress traffic (from stateless point of view) are not leaving the bluefield. Symptoms are the next: the baremetal to which bluefield-2 is connected successfully responds on ping, but does not return any response for TCP traffic and can not send anything from inside. We have some security group with fully allowed egress rules. +--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+ | ID | IP Protocol | Ethertype | IP Range | Port Range | Direction | Remote Security Group | Remote Address Group | +--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+ | 14604165-e0c1-4bce-ae21-d20bf4165fa2 | None | IPv6 | ::/0 | | ingress | None | None | | 16f3f44f-1c9a-48f1-bcd0-7ff8df0cd30a | None | IPv4 | 0.0.0.0/0 | | ingress | None | None | | c7054cde-72ce-4dc8-a4e0-361df199204e | None | IPv6 | ::/0 | | egress | None | None | | d8bc8f82-f181-443d-a0ca-67cbae78b47f | None | IPv4 | 0.0.0.0/0 | | egress | None | None | +--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+ and port to which it is assigned has port_security_enabled: True (if we are disabling port security, there is no problem anymore, it is actual only for enabled port security) we have disabled DVR and VxLAN tunnel here, we have native openvswitch firewall also [agent] tunnel_types = l2_population = true arp_responder = true extensions = qos baremetal_smartnic = True [securitygroup] firewall_driver = openvswitch [ovs] bridge_mappings = br-ex:br-int datapath_type = system ovsdb_connection = tcp:127.0.0.1:6640 #local_ip = tunnel_bridge = of_inactivity_probe = 60 ovsdb_timeout = 60 when we're sending some traffic, all flows in table 71 (BASE_EGRESS_TABLE) has n_packets = 0, so they are not reaching it. in table 60 (TRANSIENT_TABLE), which should send traffic to the table 71, on flow which should do it we can see n_packets=0 as well cookie=0x6cc97f12f173f538, duration=2086.129s, table=60, n_packets=0, n_bytes=0, priority=100,in_port=pf0hpf actions=load:0x2b->NXM_NX_REG5[],load:0x1->NXM_NX_REG6[],resubmit(,71) at the same time, the counter for NORMAL flow is growing, so packets are probably going to here (not sure cookie=0x6cc97f12f173f538, duration=2126.547s, table=60, n_packets=139340, n_bytes=6817502, priority=3 actions=NORMAL on trace we can see that the packet was directly sent to port 1 instead of going via the table ovs-appctl ofproto/trace br-int 'dl_src=a0:88:c2:eb:15:4e,dl_dst=00:1c:73:00:57:ff,ip,nw_dst=DST_IP,nw_src=SRC_IP,in_port=43,nw_ttl=64,nw_proto=6,tp_dst=80' Flow: tcp,in_port=43,vlan_tci=0x0000,dl_src=a0:88:c2:eb:15:4e,dl_dst=00:1c:73:00:57:ff,nw_src=SRC_IP,nw_dst=DST_IP,nw_tos=0,nw_ecn=0,nw_ttl=64,nw_frag=no,tp_src=0,tp_dst=80,tcp_flags=0 bridge("br-int") ---------------- 0. priority 0, cookie 0x699a137a0a73d6a8 NORMAL -> forwarding to learned port bridge("br-int") ---------------- 0. in_port=5,dl_vlan=1, priority 4, cookie 0x699a137a0a73d6a8 set_field:4297->vlan_vid NORMAL -> forwarding to learned port Final flow: unchanged Megaflow: recirc_id=0,eth,ip,in_port=43,dl_src=a0:88:c2:eb:15:4e,dl_dst=00:1c:73:00:57:ff,nw_frag=no Datapath actions: push_vlan(vid=201,pcp=0),1 any ideas why it happens or any proposals for future debugging? Thank you in advance!