Hi All, After all discussions on mailing thread, I would like to summarize concluded points as under:- 1. If operator sets ``vcpu_pin_set`` in Stein and upgrade it to Train or ``vcpu_pin_set`` is set on a new compute node, then both VCPU and PCPU inventory should be reported to placement. 2. User can’t request both ``resources:PCPU`` and ``resources:VCPU`` in a single request for Train release. And in future ‘U’ release, user can request both ``resources:PCPU`` and ``resources:VCPU`` in a single request. 3. In “U” release, “vcpu_pin_set” config option will be removed. In this case, operator will either need to set “cpu_shared_set” or “cpu_dedicated_set” accordingly on old compute nodes and on new compute nodes, operator can set both the config option “cpu_shared_set” and “cpu_dedicated_set” if required. 4. In Train release, operator will also need to continue retaining the same behavior of host aggregates as that of Stein to differentiate between Numa-awared compute host: * Hosts meant for pinned instances should be part of the aggregate with metadata “pinned=True” * Hosts meant for non-pinned instances should be part of the aggregate with metadata “pinned=False” 5. In Train release, old flavor can be used as is in which case scheduler pre-filter will map it to the next syntax “resources:PCPU” in case cpu_policy=dedicated. 6. In Train release, new flavor syntax “resources:PCPU=1 will be accepted in flavor extra specs but in this case we expect operator will set “aggregate_instance_extra_specs:pinned=True” in flavor extra specs and the hosts are part of the aggregate which has metadata “pinned=True”. Regards, Bhagyashri Shewale ________________________________ From: Stephen Finucane <sfinucan@redhat.com> Sent: Tuesday, June 18, 2019 6:51:15 PM To: Shewale, Bhagyashri; openstack-discuss@lists.openstack.org Subject: Re: [nova] Spec: Standardize CPU resource tracking On Tue, 2019-06-18 at 06:41 +0000, Shewale, Bhagyashri wrote:
As above, ignore 'cpu_shared_set' but issue a warning. Use the value of ‘vcpu_pin_set' to report both VCPU and PCPU inventory. Note that ‘vcpu_pin_set' is already used to calculate VCPU inventory.
As mentioned in the spec, If operator sets the ``vcpu_pin_set`` in the Stein and upgrade to Train then both VCPU and PCPU inventory should be reported in placement.
As on current master (Stein) if operator sets ``vpcu_pin_set=0-3`` on Compute node A and adds that node A into the host aggregate say “agg1” having metadata ``pinned=true``, then it allows to create both pinned and non-pinned instances which is known big issue. Create instance A having flavor extra specs ("aggregate_instance_extra_specs:pinned": "true") then instance A will float on cpus 0-3 Create the instance B having flavor extra specs ("aggregate_instance_extra_specs:pinned": "true", "hw:cpu_policy": "dedicated") then instance B will be pinned to one of the cpu say 0. Now, operator will do the upgrade (Stein to Train), nova compute will report both VCPU and PCPU inventory. In this case if cpu_allocation_ratio is 1, then total PCPU available will be 4 (vpcu_pin_set=0-3) and VCPU will also be 4. And this will allow user to create maximum of 4 instances with flavor extra specs ``resources:PCPU=1`` and 4 instances with flavor extra specs ``resources:VCPU=1``.
If the cpu_allocation_ratio is 1.0 then yes, this is correct. However, if it's any greater (and remember, the default is 16.0) then the gap is much smaller, though still broken.
With current master code, it’s possible to create only 4 instances where now, by reporting both VCPU and PCPU, it will allow user to create total of 8 instances which is adding another level of problem along with the existing known issue. Is this acceptable? because this is decorating the problems.
I think is acceptable, yes. As we've said, this is broken behavior and things are just slightly more broken here, though not horribly so. As it stands, if you don't isolate pinned instances from non-pinned instances, you don't get any of the guarantees pinning is supposed to provide. Using the above example, if you booted two pinned and two unpinned instances on the same host, the unpinned instances would float over the pinned instances' cores [*] and impact their performance. If performance is an issue, host aggregrates will have been used. [*] They'll actually float over the entire range of host cores since instnace without a NUMA topology don't respect the 'vcpu_pin_set' value.
If not acceptable, then we can report only PCPU in this case which will solve two problems:- The existing known issue on current master (allowing both pinned and non-pinned instances) on the compute host meant for pinning. Above issue of allowing 8 instances to be created on the host. But there is one problem in taking this decision, if no instances are running on the compute node in case only ``vcpu_pinned_set`` is set, how do you find out this compute node is configured to create pinned or non-pinned instances? If instances are running, based on the Host numa_topology.pinned_cpus, it’s possible to detect that.
As noted previously, this is too complex and too error prone. Let's just suffer the potential additional impact on performance for those who haven't correctly configured their deployment, knowing that as soon as they get to U, where we can require the 'cpu_dedicated_set' and 'cpu_shared_set' options if you want to use pinned instances, things will be fixed. Stephen Disclaimer: This email and any attachments are sent in strictest confidence for the sole use of the addressee and may contain legally privileged, confidential, and proprietary data. If you are not the intended recipient, please advise the sender by replying promptly to this email and then delete and destroy this email and any attachments without any further use, copying or forwarding.