Is this a production environment or your home lab? There are two ways to setup octavia mgmt network. For development I mostly go with tenant type and for production like multi node I will pick a VLAN based network type. In your case make sure you have vlan.2140 interface on all controller nodes with IP and on compute nodes you don't need to create that interface because OVS will take that on the provider bridge. On Mon, Feb 5, 2024 at 8:05 AM Jayesh Chaudhari < jayesh.chaudhari1990@gmail.com> wrote:
Thanks Eugen, for the prompt response.
config_drive is set to True in amphora VM. I tried to reach amphora VM from my controller node, but its not reachable. I found some old articles where they manually created a port on the OVS bridge for lbaas. ( https://cloudbase.it/openstack-on-arm64-lbaas/ ) .
Is it still recommended ? if it is, should it be on both controller and compute ?
On Mon, Feb 5, 2024 at 4:42 PM Eugen Block <eblock@nde.ag> wrote:
Hi,
can you verify if your amphorae instance has config_drive enabled?
control01:~ # openstack loadbalancer amphora list --long
gives you the list including "compute_id" which is the nova instance, then check:
control01:~ # openstack server show <UUID> | grep config_drive | config_drive | True
Usually, with external (provider) networks the instances require the config-drive to get their network configuration. You could also use a customized image for the amphorae to be able to login and inspect errors, that's how we usually do it.
Regards, Eugen
Zitat von Jayesh Chaudhari <jayesh.chaudhari1990@gmail.com>:
Folks,
I have set up kolla-ansible yoga openstack and configured Octavia using VLAN. But when I am trying to create a LB, it is stuck in pending create then eventually failed. And in logs I can see octavia-worker unable to connect to amphora instance.
Is there any sanity which I can do to check if my implementation is correct ? Or am I missing something? Please advise.
My configuration in global.yml enable_octavia: yes octavia_network_interface: "vlan.2140" octavia_auto_configure: yes octavia_amp_flavor: name: "amphora" is_public: yes vcpus: 2 ram: 1024 disk: 5 octavia_amp_security_groups: mgmt-sec-group: name: "lb-mgmt-sec-grp" rules: - protocol: icmp - protocol: tcp src_port: 22 dst_port: 22 octavia_amp_network: name: lb-mgmt-net provider_network_type: vlan provider_segmentation_id: 2140 provider_physical_network: physnet1 external: false shared: false subnet: name: lb-mgmt-subnet cidr: "10.145.50.128/26" allocation_pool_start: "10.145.50.135" allocation_pool_end: "10.145.50.190" gateway_ip: "10.145.50.129" enable_dhcp: yes octavia_amp_image_tag" "amphora" octavia_loadbalancer_topology: "SINGLE"
Thanks, Jayesh