It's hard to tell what is wrong with your setup, I don't really use mine but this was the last working config I had to be able to create swift containers directly in RGW: ---snip--- # ceph.conf: [client.rgw.ses6-mon1] rgw frontends = "beast port=80" rgw dns name = ses6-mon1.example.com rgw enable usage log = true rgw thread pool size = 512 rgw keystone api version = 3 rgw keystone url = http://control-node.example.com:5000 rgw keystone admin user = rgw rgw keystone admin password = **** rgw keystone admin domain = default rgw keystone admin project = service rgw keystone accepted roles = admin,Member,_member_,member rgw keystone verify ssl = false rgw s3 auth use keystone = true rgw keystone revocation interval = 0 # User role (I don't think admin is required) openstack role add --user rgw --project 9e8a67da237a4b26afb2819d2dea2219 admin # Create keystone endpoints openstack endpoint create --region RegionOne swift admin "http://ses6-mon1.example.com:80/swift/v1" openstack endpoint create --region RegionOne swift internal "http://ses6-mon1.example.com:80/swift/v1" openstack endpoint create --region RegionOne swift public "http://ses6-mon1.example.com:80/swift/v1" # Create container and files openstack container create swift1 +---------+-----------+---------------------------------------------------+ | account | container | x-trans-id | +---------+-----------+---------------------------------------------------+ | v1 | swift1 | tx000000000000000000001-0060b4ba48-d724dc-default | +---------+-----------+---------------------------------------------------+ openstack object create --name file1 swift1 chef-client.log +--------+-----------+----------------------------------+ | object | container | etag | +--------+-----------+----------------------------------+ | file1 | swift1 | 56a1ed3b201c1e753bcbe80c640349f7 | +--------+-----------+----------------------------------+ ---snip--- You are mixing dns names and IP addresses, I can't tell if that's a problem but it probably should work, I'm not sure. Compared to my ceph.conf these are the major differences: rgw keystone verify ssl = false rgw s3 auth use keystone = true rgw keystone revocation interval = 0 And I don't use rgw_keystone_token_cache_size. Maybe try again with the options I use. Zitat von Michel Niyoyita <micou12@gmail.com>:
Hello,
I am trying to replace swift by RGW as backend storage but I failed once I try to post a container in the OpenStack side however, all interfaces are configured (admin, public and internal). but Once I post from RGW host it is created . Another issue is that object storage does not appear on the horizon dashboard . I have deployed openstack all-in-one using kolla-ansible and Os is ubuntu
(kolla-open1) stack@kolla-open1:~$ swift -v post myswift Container POST failed: http://ceph-osd3:8080/swift/v1/myswift 401 Unauthorized b'AccessDenied' Failed Transaction ID: tx000000000000000000008-006135dcbd-87d63-default
(kolla-open1) stack@kolla-open1:~$ swift list Account GET failed: http://ceph-osd3:8080/swift/v1?format=json 401 Unauthorized [first 60 chars of response] b'{"Code":"AccessDenied","RequestId":"tx00000000000000000000c-' Failed Transaction ID: tx00000000000000000000c-006135de42-87d63-default
Kindly help to solve the issue
Michel
On Thu, Sep 2, 2021 at 4:28 PM Alex Schultz <aschultz@redhat.com> wrote:
The swift docs are a bit out of date as they still reference python2 despite python3 being supported for some time now. Replace python- with python3- and try again.
On Thu, Sep 2, 2021 at 7:35 AM Michel Niyoyita <micou12@gmail.com> wrote:
---------- Forwarded message --------- From: Michel Niyoyita <micou12@gmail.com> Date: Thu, Sep 2, 2021 at 12:17 PM Subject: Fwd: [ceph-users] Re: Replacing swift with RGW To: <openstack-discuss@lists.openstack.org>
---------- Forwarded message --------- From: Eugen Block <eblock@nde.ag> Date: Thu, Sep 2, 2021 at 10:39 AM Subject: Re: [ceph-users] Re: Replacing swift with RGW To: Michel Niyoyita <micou12@gmail.com>
You should continue this thread on the openstack-discuss mailing list (openstack-discuss@lists.openstack.org) since this is not a ceph issue. I'm not familiar with kolla and I don't know the requirements to install openstack-swift, you'll need to ask the openstack community.
Zitat von Michel Niyoyita <micou12@gmail.com>:
Below are errors I am getting once I try to run swift commands . the second one is the error I get once try to install python-swiftclient
(kolla-open) [stack@kolla-open ~]$ swift -v stat -bash: swift: command not found (kolla-open) [stack@kolla-open ~]$ sudo yum -y install python-swiftclient Last metadata expiration check: 0:59:21 ago on Thu 02 Sep 2021 09:21:53 AM CAT. No match for argument: python-swiftclient Error: Unable to find a match: python-swiftclient (kolla-open) [stack@kolla-open ~]$
Waiting for your help
On Thu, Sep 2, 2021 at 10:17 AM Eugen Block <eblock@nde.ag> wrote:
I can't tell for sure, but yes, I believe you need the openstack-swift package (with dependencies). What errors do you get? The more information you share the better people can help.
Zitat von Michel Niyoyita <micou12@gmail.com>:
I tried to install "sudo yum -y install python-swiftclient" on openstack side but fails . are there openastack-shwift packages which are needed? if are there please help me to get . may be also it is the cause I am failing to run swift command on openstack cli side.
thank you for your continued support.
Micheal
On Thu, Sep 2, 2021 at 9:14 AM Eugen Block <eblock@nde.ag> wrote:
> I only configured the endpoints for the clients to directly access the > RGWs, but you'll probably need to install the openstack-swift package. > Or have you done that already? > > > Zitat von Michel Niyoyita <micou12@gmail.com>: > > > Thank you Eugen for your prompt response. > > > > Now the commands provided work. but I am not finding the object storage > on > > the horizon dashboard , but it appears in the system information > services. > > [image: image.png] > > so my question is how to configure it in order that it can appear in the > > dashboard . > > > > Michel > > > > On Wed, Sep 1, 2021 at 3:49 PM Eugen Block <eblock@nde.ag> wrote: > > > >> Sorry, one little detail slipped through, the '--region' flag has to > >> be put before the 'service' name. The correct command would be: > >> > >> openstack endpoint create --region RegionOne swift admin > >> http://ceph-osd3:8080/swift/v1 > >> > >> and respectively for the other interfaces. > >> > >> > >> Zitat von Eugen Block <eblock@nde.ag>: > >> > >> > Hi, > >> > > >> > this is not a ceph issue but your openstack cli command as the error > >> > message states. > >> > > >> > Try one interface at a time: > >> > > >> > openstack endpoint create swift public > >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift > >> > openstack endpoint create swift admin http://ceph-osd3:8080/swift/v1 > >> > --region RegionOne swift > >> > openstack endpoint create swift internal > >> > http://ceph-osd3:8080/swift/v1 --region RegionOne swift > >> > > >> > > >> > Zitat von Michel Niyoyita <micou12@gmail.com>: > >> > > >> >> Hello , > >> >> > >> >> Below are errors I am getting once I am trying to integrate swift > with > >> >> Radosgateway. > >> >> > >> >> From openstack side once i try to endpoint which will point to the > >> >> radosgateway : > >> >> > >> >> (kolla-open) [stack@kolla-open kolla]$ openstack endpoint create > >> >> --publicurl http://ceph-osd3:8080/swift/v1 --adminurl > >> >> http://ceph-osd3:8080/swift/v1 --internal > >> http://ceph-osd3:8080/swift/v1 > >> >> --region RegionOne swift > >> >> usage: openstack endpoint create [-h] [-f > {json,shell,table,value,yaml}] > >> >> [-c COLUMN] [--noindent] [--prefix > >> PREFIX] > >> >> [--max-width <integer>] [--fit-width] > >> >> [--print-empty] [--region > <region-id>] > >> >> [--enable | --disable] > >> >> <service> <interface> <url> > >> >> openstack endpoint create: error: argument <interface>: invalid > choice: > >> ' > >> >> http://ceph-osd3:8080/swift/v1' (choose from 'admin', 'public', > >> 'internal') > >> >> > >> >> (kolla-open) [stack@kolla-open kolla]$ > >> >> > >> >> below are my /etc/ceph/ceph.conf file : > >> >> > >> >> [client.rgw.ceph-osd3] > >> >> rgw_dns_name = ceph-osd3 > >> >> host = ceph-osd3 > >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3/keyring > >> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.log > >> >> rgw frontends = civetweb port=10.10.29.110:8080 num_threads=100 > >> >> rgw_keystone_url=http://10.10.29.150:35357 > >> >> rgw_keystone_admin_user=admin > >> >> rgw_keystone_admin_password=admin > >> >> rgw_keystone_admin_tenant=admin > >> >> rgw_keystone_accepted_role=admin Member swiftoperator > >> >> rgw_keystone_token_cache_size=200 > >> >> rgw_keystone_revocation_interval=300 > >> >> > >> >> [client.rgw.ceph-osd3.rgw0] > >> >> host = ceph-osd3 > >> >> keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-osd3.rgw0/keyring > >> >> log file = /var/log/ceph/ceph-rgw-ceph-osd3.rgw0.log > >> >> rgw frontends = beast endpoint=10.10.29.110:8080 > >> >> rgw thread pool size = 512 > >> >> > >> >> please note that my rgw_dns_name = ceph_osd3 with 10.10.29.110 as IP > >> >> > >> >> and 10.10.29.150 all-in-one IP > >> >> > >> >> > >> >> Please crosscheck where I might make mistake and try to correct. > >> >> > >> >> Best regards > >> >> > >> >> Michel > >> >> > >> >> On Mon, Aug 30, 2021 at 11:25 AM Etienne Menguy < > >> etienne.menguy@croit.io> > >> >> wrote: > >> >> > >> >>> Hi, > >> >>> > >> >>> There are some information on Ceph documentation > >> >>> https://docs.ceph.com/en/latest/radosgw/keystone/ < > >> >>> https://docs.ceph.com/en/latest/radosgw/keystone/> . > >> >>> - Use keystone as auth for RGW > >> >>> - Create service and register your RGW as swift > >> >>> > >> >>> Étienne > >> >>> > >> >>>> On 27 Aug 2021, at 15:47, Michel Niyoyita < micou12@gmail.com> > wrote: > >> >>>> > >> >>>> Hello , > >> >>>> > >> >>>> I have configured RGW in my ceph cluster deployed using ceph > ansible > >> and > >> >>>> create sub user to access the created containers and would like to > >> >>> replace > >> >>>> swift by RGW in the openstack side. Anyone can help on > configuration > >> to > >> >>> be > >> >>>> done in the OpenStack side in order to integrate those services. I > >> have > >> >>>> deployed OpenStack wallaby using Kolla-ansible on ubuntu 20.04. and > >> ceph > >> >>>> pacific 16.2.5 was deployed using ansible on ubuntu 20.04 > >> >>>> > >> >>>> Kindly help for the configuration or documentation. > >> >>>> > >> >>>> Best Regards > >> >>>> > >> >>>> Michel > >> >>>> _______________________________________________ > >> >>>> ceph-users mailing list -- ceph-users@ceph.io > >> >>>> To unsubscribe send an email to ceph-users-leave@ceph.io > >> >>> > >> >>> _______________________________________________ > >> >>> ceph-users mailing list -- ceph-users@ceph.io > >> >>> To unsubscribe send an email to ceph-users-leave@ceph.io > >> >>> > >> >> _______________________________________________ > >> >> ceph-users mailing list -- ceph-users@ceph.io > >> >> To unsubscribe send an email to ceph-users-leave@ceph.io > >> > >> > >> > >> _______________________________________________ > >> ceph-users mailing list -- ceph-users@ceph.io > >> To unsubscribe send an email to ceph-users-leave@ceph.io > >> > > > >