Hello Neutron! I am looking into running stacks with OVN on a leaf-spine network, and have some floating IPs routed between racks. Basically each rack is assigned its own set of subnets. Some VLANs are stretched across all racks: the provisioning VLAN used by tripleo to deploy the stack, and the VLANs for the controllers API IPs. However, each tenant subnet is local to a rack: for example each OVN chassis has a ovn-encap-ip with an IP of the tenant subnet of its own rack. Traffic between 2 racks is sent to a spine, and leaves and spines run some eVPN-like thing: each pair of ToR is a vtep, traffic is encapsulated as VXLAN, and routes between vteps are exchanged with BGP. I am looking into supporting floating IPs in there: I expect floating IPs to be able to move between racks, as such I am looking into publishing the route for a FIP towards an hypervisor, through BGP. Each fip is a /32 subnet with an hypervisor tenant's IP as next hop. It seems there are several ideas to achieve this (it was discussed [before][1] in ovs conference) - using [neutron-dynamic-routing][2] - that seems to have some gaps for OVN. It uses os-ken to talk to switches and exchange routes - using [OVN BGP agent][3] that uses FRR, it seems there is a related [RFE][4] for integration in tripleo There is btw also a [BGPVPN][5] project (it does not match my usecase as far as I tried to understand it) that also has some code that talks BGP to switches, already integrated in tripleo. For my tests, I was able to use the neutron-dynamic-routing project (almost) as documented, with a few changes: - for traffic going from VMs to outside the stack, the hypervisor was trying to resolve the "gateway of fIPs" with ARP request which does not make any sense. I created a dummy port with the mac address of the virtual router of the switches: ``` $ openstack port list --mac-address 00:1c:73:00:00:11 -f yaml - Fixed IP Addresses: - ip_address: 10.64.254.1 subnet_id: 8f37 ID: 4028 MAC Address: 00:1c:73:00:00:11 Name: lagw Status: DOWN ``` this prevent the hypervisor to send ARP requests to a non existent gateway - for traffic coming back, we start the neutron-bgp-dragent agent on the controllers. We create the right bgp speaker, peers, etc. - neutron-bgp-dragent seems to work primarily with ovs ml2 plugin, it selects fips and join with ports owned by a "floatingip_agent_gateway" which does not exist on OVN. We can define ourselves some ports so that the dragent is able to find the tenant IP of a host: ``` openstack port create --network provider --device-owner network:floatingip_agent_gateway --host cpu35d.cloud --fixed-ip ip-address=10.64.245.102 ag2 ``` - when creating a floating IP and assigning a port to it, Neutron reads changes from OVN SB and fills the binding information into the port: ``` $ openstack port show -c binding_host_id `openstack floating ip show 10.64.254.177 -f value -c port_id` +-----------------+----------------------------------------+ | Field | Value | +-----------------+----------------------------------------+ | binding_host_id | cpu35d.cloud | +-----------------+----------------------------------------+ ``` this allows the dragent to publish the route for the fip ``` $ openstack bgp speaker list advertised routes bgpspeaker +------------------+---------------+ | Destination | Nexthop | +------------------+---------------+ | 10.64.254.177/32 | 10.64.245.102 | +------------------+---------------+ ``` - traffic reaches the hypervisor but (for reason I don't understand) I had to add a rule ``` $ ip rule 0: from all lookup local 32765: from all iif vlan1234 lookup ovn 32766: from all lookup main 32767: from all lookup default $ ip route show table ovn 10.64.254.177 dev vlan1234 scope link ``` so that the traffic coming for the fip is not immediately discarded by the hypervisor (it's not an ideal solution but it is a workaround that makes my one fIP work!) So all in all it seems it would be possible to use the neutron-dynamic-routing agent, with some minor modifications (eg: to also publish the fip of the OVN L3 gateway router). I am wondering whether I have overlooked anything, and if such kind of deployment (OVN + neutron dynamic routing or similar) is already in use somewhere. Does it make sense to have a RFE for better integration between OVN and neutron-dynamic-routing? Thanks Francois [1]: https://www.openvswitch.org/support/ovscon2020/slides/OVS-CONF-2020-OVN-WITH... [2]: https://docs.openstack.org/neutron/latest/admin/config-bgp-dynamic-routing.h... [3]: https://ltomasbo.wordpress.com/2021/02/04/openstack-networking-with-bgp/ [4]: https://specs.openstack.org/openstack/tripleo-specs/specs/wallaby/triplo-bgp... [5]: https://github.com/openstack/tripleo-heat-templates/blob/master/environments...