If you have multiple compute nodes, can’t you just compare a working node with this one and fix the issue? I assume you are referring to compute nodes.
Zitat von sarasoltanm2000@gmail.com:
The problem started from where I realized I couldn't ping or ssh the instances in openstack then I realized that it was a networking problem and that br-ex was not connected to my interfaces. for some reason I had to create a bond with a static private ip address of the second interface. (172.16.8.2/24). so to solve this problem I tried to connect the bond to the br-ex but as soon as I connect the bond to br-ex I get disconnected from the server (server cannot ping its gateway) and br-ex state goes down, when I connect it to the bond by the following command: sudo ovs-vsctl add-port br-ex bond0
and when I try to bring the bridge br-ex back up, the bond is automatically deleted from the ports.
this is the configuration of bridges before adding the bond port:
#ovs-vsctl show Manager "ptcp:6640:127.0.0.1" is_connected: true Bridge br-ex Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure datapath_type: system Port phy-br-ex Interface phy-br-ex type: patch options: {peer=int-br-ex} Port br-ex Interface br-ex type: internal Bridge br-int Controller "tcp:127.0.0.1:6633" is_connected: true fail_mode: secure datapath_type: system Port br-int Interface br-int type: internal Port "tapf556c-c7" tag: 1 Interface "tapf556c-c7" type: internal Port "tapd2980-19" tag: 4095 Interface "tapd2980-19" type: internal Port "qr-8ea26-da" tag: 4095 Interface "qr-8ea26-da" type: internal Port "tap89cc3-c0" tag: 2 Interface "tap89cc3-c0" type: internal Port int-br-ex Interface int-br-ex type: patch options: {peer=phy-br-ex} ovs_version: "2.12.0"
any idea why this happens and what is the solution?
btw the instance is not connected to a router and it is basically connected to 2 networks (172.16.8.32/28 and 172.16.8.48/28)