February 2025 - openstack-discuss

[octavia] Purging ERROR'ed amphora and load balancers stuck in transitional states
by Paul Browne 11 Apr '25

11 Apr '25

Hello Octavia users, For a while I've been trying to find a systematic way to remove Octavia LBs+Amphora that have become stuck in ERROR or transitional PENDING_* states ; $ openstack loadbalancer amphora list -f value | grep ERROR a2323f14-3aaa-418a-8249-111aaa9c21fe 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe ERROR MASTER 10.8.0.242 192.168.3.247 e5b236ba-e7ee-4ed7-9f58-57ce7a408489 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe ERROR BACKUP 10.8.0.190 192.168.3.247 6b556f28-93c9-49dd-b6ee-4379288e7957 d5e402fe-2c4b-49af-a700-532cb408cee5 ERROR MASTER 10.8.0.39 192.168.3.126 c669db5d-8686-4d5c-9e95-e02030b34301 d5e402fe-2c4b-49af-a700-532cb408cee5 ERROR BACKUP 10.8.0.174 192.168.3.126 $ openstack loadbalancer list -f value | grep -vi active 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe k8s-clusterapi-cluster-default-ci-6386871107-kube-upgrade-kubeapi 3a06571936a0424bb40bc5c672c4ccb1 192.168.3.247 PENDING_UPDATE amphora d5e402fe-2c4b-49af-a700-532cb408cee5 k8s-clusterapi-cluster-default-ci-6386871107-latest-kubeapi 3a06571936a0424bb40bc5c672c4ccb1 192.168.3.126 PENDING_DELETE amphora These resources are marked immutable and so cannot be failed over or deleted; $ openstack loadbalancer amphora failover a2323f14-3aaa-418a-8249-111aaa9c21fe Load Balancer 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe is immutable and cannot be updated. (HTTP 409) (Request-ID: req-6e66c4e8-c3d3-4549-a03c-367017c8c8b3) $ openstack loadbalancer failover 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe Invalid state PENDING_UPDATE of loadbalancer resource 1fa7bd54-f60c-420c-94f3-d4c02f03d4fe (HTTP 409) (Request-ID: req-84b44212-e7a8-4101-a16f-18c774c0577e) The backing Nova instances for these Amphora do seem to exist and be in good working order. Is there any API way to purge these out of Octavia's service state, or would (very careful) DB hackery be required here? Many thanks, Paul Browne ******************* Paul Browne Research Computing Platforms University Information Services Roger Needham Building JJ Thompson Avenue University of Cambridge Cambridge United Kingdom E-Mail: pfb29(a)cam.ac.uk<mailto:pfb29@cam.ac.uk> Tel: 0044-1223-746548 *******************

4 6

GPU PCI passthrough woes.
by Andy Speagle 09 Apr '25

09 Apr '25

Hey Folks, I could use a little assistance getting GPU passthrough working. I had this working already for one flavor of nvidia gpu... and I've added some hosts with a much newer gpu... I've updated the pci_alias and pci_passthrough variables and those seem to be getting set properly in nova.conf passthrough_whitelist = [{"vendor_id":"10de", "product_id":"1b06"},{"vendor_id":"10de", "product_id":"26b9"}] alias = {"name": "gpu", "product_id": "1b06", "vendor_id": "10de"} alias = {"name": "gpu-l40s", "product_id": "26b9", "vendor_id": "10de"} I believe I have all of the iommu stuff configured and have the pci- stub module entries... dmesg output shows that the GPUs are being claimed by the stub module. $ openstack flavor show t1.small_gpu_l40s +----------------------------+--------------------------------------+ | Field | Value | +----------------------------+--------------------------------------+ | OS-FLV-DISABLED:disabled | False | | OS-FLV-EXT-DATA:ephemeral | 0 | | access_project_ids | None | | description | None | | disk | 0 | | id | af70c94e-0026-4a39-bc1e-dfb93b286a54 | | name | t1.small_gpu_l40s | | os-flavor-access:is_public | True | | properties | pci_passthrough:alias='gpu-l40s:1' | | ram | 2048 | | rxtx_factor | 1.0 | | swap | 0 | | vcpus | 1 | +----------------------------+--------------------------------------+ Yet... I can't seem to get an instance to run using that new flavor... keeps complaining about there not being enough hosts available. Fault: code: 500 created: 2024-10-30T02:04:33Z message: "No valid host was found. There are not enough hosts available." details: | Traceback (most recent call last): File "/usr/lib/python3/dist-packages/nova/conductor/manager.py", line 1580, in schedule_and_build_instances host_lists = self._schedule_instances(context, request_specs[0], File "/usr/lib/python3/dist-packages/nova/conductor/manager.py", line 940, in _schedule_instances host_lists = self.query_client.select_destinations( File "/usr/lib/python3/dist- packages/nova/scheduler/client/query.py", line 41, in select_destinations return self.scheduler_rpcapi.select_destinations(context, spec_obj, File "/usr/lib/python3/dist-packages/nova/scheduler/rpcapi.py", line 160, in select_destinations return cctxt.call(ctxt, 'select_destinations', **msg_args) File "/usr/lib/python3/dist- packages/oslo_messaging/rpc/client.py", line 189, in call result = self.transport._send( File "/usr/lib/python3/dist- packages/oslo_messaging/transport.py", line 123, in _send return self._driver.send(target, ctxt, message, File "/usr/lib/python3/dist- packages/oslo_messaging/_drivers/amqpdriver.py", line 689, in send return self._send(target, ctxt, message, wait_for_reply, timeout, File "/usr/lib/python3/dist- packages/oslo_messaging/_drivers/amqpdriver.py", line 681, in _send raise result nova.exception_Remote.NoValidHost_Remote: No valid host was found. There are not enough hosts available. Traceback (most recent call last): File "/usr/lib/python3/dist- packages/oslo_messaging/rpc/server.py", line 241, in inner return func(*args, **kwargs) File "/usr/lib/python3/dist-packages/nova/scheduler/manager.py", line 223, in select_destinations selections = self._select_destinations( File "/usr/lib/python3/dist-packages/nova/scheduler/manager.py", line 250, in _select_destinations selections = self._schedule( File "/usr/lib/python3/dist-packages/nova/scheduler/manager.py", line 416, in _schedule self._ensure_sufficient_hosts( File "/usr/lib/python3/dist-packages/nova/scheduler/manager.py", line 455, in _ensure_sufficient_hosts raise exception.NoValidHost(reason=reason) nova.exception.NoValidHost: No valid host was found. There are not enough hosts available. Any clues on how/where to dig into this more to see what might be missing? Thanks. -- Andy Speagle

3 2

bug report
by Xavier Benjamin 04 Apr '25

04 Apr '25

whenever i try to connect to trove pts servers it would usually say fails to authenticate or something. Can you fix that please?

2 2

[openstack-helm] Merge openstack-helm and openstack-helm-infra git repos
by Vladimir Kozhukalov 31 Mar '25

31 Mar '25

Hi dear Openstack-Helmers, I would like to suggest merging the two project git repos: https://opendev.org/openstack/openstack-helm-infra.git https://opendev.org/openstack/openstack-helm.git At some point it seemed reasonable to have separate git repos for openstack and infrastructure charts. But now it looks like we are experiencing more cons than pros. When working on some features we are forced to prepare sets of interdependent patches. Some code can be deduplicated. Also when we publish charts we append two commit hashes as package metadata. Also we can reduce the number of test jobs if we have all chats in one repo. Other people also proposed this earlier. So if there are no objections let's make it done. I understand this is going to affect many of our users. Please express your opinions so we don't break any downstream. If we all agree about this, then I would say we can do this in the mid of March/2025 before 2025.2 PTG. The procedure is going to be smth. like 1. Freeze the infra repo and prepare retirement PSs for it 2. Merge openstack-helm-infra repo into openstack-helm ``` git clone https://opendev.org/openstack/openstack-helm.git cd openstack-helm git remote add infra https://opendev.org/openstack/openstack-helm-infra.git git fetch infra git checkout -b infra infra/master git checkout master git merge --allow-unrelated-histories infra # resolve not so many conflicts git review ``` 3. Accept merger PS 4. Update documentation 5. Accept infra retirement PSs (openstack-helm-infra and project-config) -- Best regards, Kozhukalov Vladimir

4 10

[mistral][heat][watcher][aodh] croniter being abandoned
by Thierry Carrez 22 Mar '25

22 Mar '25

Hi everyone, It was brought to my attention that the croniter maintainer has decided to abandon his project, due to not wanting to deal with his perceived exposure to the EU Cyber-Resilience act (CRA). https://pypi.org/project/croniter/#disclaimer The maintainer indicates that you should no longer use it and it may be "unpublished" any time after March 15, 2025. Croniter is being used in at least Mistral, Heat, Watcher, and Aodh as a dependency. While this is clearly an overreaction (the CRA only applies to "economic operators" putting "products with digital elements" on the market "in the course of a commercial activity"), we should probably prepare to migrate away from this dependency, or maintain a fork of it. -- Thierry Carrez (ttx)

5 8

[Devstack] Trying to setup development environment on VM
by Ishan Shanware (ishanwar) 16 Mar '25

16 Mar '25

Hello Everyone, I am currently trying to setup in all-in-one development environment for OpenStack on a Debian VM. The VM has 16 GB RAM and 4 CPUs. However, I face an error while trying to run FORCE=yes ./stack.sh. I get an error that keystone does not start. This causes the entire process to fail. Requesting assistance in solving this issue. I am following the this guide: https://docs.openstack.org/devstack/latest/guides/single-machine.html PFA the error log and error message on the terminal. [Call Trace] ./stack.sh:1126:start_keystone /opt/stack/devstack/lib/keystone:549:die [ERROR] /opt/stack/devstack/lib/keystone:549 keystone did not start Error on exit World dumping... see /opt/stack/logs/worlddump-2024-11-18-150808.txt for details ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory) Thanks in advance, Ishan

3 5

[all][tc][ptl][qa] Migrating upstream CI/CD jobs to Ubuntu Noble (24.04)
by Ghanshyam Mann 14 Mar '25

14 Mar '25

Hello Everyone, As per the 2025.2 cycle testing runtime, we need to run upstream CI/CD jobs on Ubuntu Noble (24.04) [1]. For better tracking and speeding up this work, it is the community-wide goal for this cycle[2]. This is the etherpad which has the migration plan and will be used for the tracking: - https://etherpad.opendev.org/p/migrate-to-noble I have prepared the change(WIP) for base jobs migration on Noble (openstack tox jobs, devstack, and tempest) which will migrate most of the projects jobs. Tempest change[3] include dependency on openstack tox, devstack base jobs changes so testing project gate using the the tempest change will test the complete set. Refer to the etherpad for the complete migration plan/steps. * Deadline: Nov 29th 2024 (R18) is the deadline to test/fix the projects jobs and to merge the base jobs running on Noble (openstck tox, devstack, and tempest). [1] https://governance.openstack.org/tc/reference/runtimes/2025.1.html [2] https://governance.openstack.org/tc/goals/selected/migrate-ci-jobs-to-ubunt… [3] https://review.opendev.org/c/openstack/tempest/+/932156 -gmann

2 9

[kolla] [nova] API flags ignored in Wallaby
by Albert Braden 12 Mar '25

12 Mar '25

After rebuilding our Train clusters on Wallaby we are seeing some API issues. It appears that flags that work in Train are still documented in Wallaby, but are ignored. Do we have something setup wrong, or are we encountering bugs? The first thing is the “locked” list: Train: openstack server list --all-projects --locked --os-compute-api-version 2.73 <empty list because nothing is locked> openstack server list --all-projects --unlocked --os-compute-api-version 2.73 <list of every VM in the cluster> Wallaby (locked flag is ignored): openstack server list --all-projects --locked --os-compute-api-version 2.73 <list of every VM in the cluster> openstack server list --all-projects --unlocked --os-compute-api-version 2.73 <list of every VM in the cluster> The second problem is the hypervisor list. We can’t get “long” output in Wallaby: Train: openstack hypervisor list --long | ID | Hypervisor Hostname | Hypervisor Type | Host IP | State | vCPUs Used | vCPUs | Memory MB Used | Memory MB | Wallaby (long flag is ignored): openstack hypervisor list --long | ID | Hypervisor Hostname | Hypervisor Type | Host IP | State |

6 14

[all] Important discussion about the OpenInfra Foundation's future
by Jeremy Stanley 12 Mar '25

12 Mar '25

The OpenInfra Foundation's board of directors is considering a significant organizational change, and your feedback is critical to assist them in their decision. Please read this announcement on the foundation mailing list: https://lists.openinfra.org/archives/list/foundation@lists.openinfra.org/th… You can follow up publicly on that list with any questions or input you have for the board and staff, or in one of the public feedback conference calls mentioned there, as well as privately to Jonathan Bryce or myself if you prefer to give feedback in confidence. Thanks as always for your interest in the future of our community! -- Jeremy Stanley -- Jeremy Stanley

4 11

Confidential VM and TDX support in upstream Openstack
by Ildiko Vancsa 11 Mar '25

11 Mar '25

Hi, I'm reaching out about a topic that came up in the Kata Containers / Confidential Containers communities related to a feature in Kata that is called remote hypervisor and also referred to as peer pods. Kata provides an API that allows users to implement a function to run Kata Containers pods in a remote location, which can include a different host machine or cloud environment. The Cloud API Adaptor in the Confidential Containers project is an implementation of the Kata remote hypervisor interface: https://github.com/confidential-containers/cloud-api-adaptor It recently came up to add support for OpenStack to be a cloud option to run Kata remote VMs in. In order to implement that, OpenStack would need to support the creation of Confidential VMs (CVM) along with things like TDX. I looked around and found 3rd-party implementation to add TDX support to Nova, but the repo has been archived: https://github.com/intel/secured-cloud-management-stack/blob/main/scm3.0/no… Does anyone know if the CVM support along with supporting Intel TDX or related technologies have been added to OpenStack already? Or if there's anyone in the community planning for adding these in the future? Thanks and Best Regards, Ildikó

4 4