August 2024 - openstack-discuss - lists.openstack.org

[swift] Sync rings automatically
by Mark Kirkwood 29 Aug '24

29 Aug '24

The familiar process for ring modification is: 1/ Create or amend corresponding builder file 2/ Rebalance it 3/ (R)sync the newly modified ring to all hosts in the cluster Recently I was wondering about removing the need for 3/. A very simple minded approach would be to make a cron job on each host to periodically rsync from one of the proxies (designated as the 'master' where we modify rings).. However, I then decided that it would be nicer to make a new Swift daemon and add it to the code. I have coded this up (I'm looking at adding a patch to Swift's Gerrit but thought I'd mention it here first). the basic design is: - New daemon swift-ring-syncer - Backend code in common/ring_syncer.py - Conf file ring-syncer.conf One host is designated the authoritative source (config 'ringbuilder'). All hosts can run this daemon (including the ringbuilder), Rings will be rsync'd at a configurable interval (e.g 300s).. This is safe to do even when the rings are being modified as the current code does a temp file write plus atomic rename (If it is desired to sync the builder files too then their 'save' function would need to use this sane logic instead of writing to them directly). Does this sound like something that would be good in the main Swift code? Let me know and I'll setup Gerrit if so! Regards Mark

1 0

[all][elections][ptl][tc] Combined PTL/TC 2025.1 cycle Election Nominations End
by Ian Y. Choi 29 Aug '24

29 Aug '24

The PTL and TC Nomination period is now over. The official candidate lists for PTLs [0] and TC seats [1] are available on the election website. -- PTL Election Details -- There are 4 projects without candidates, so according to this resolution[2], the TC will have to decide how the following projects will proceed: Kuryr, Mistral, Swift, Watcher There is 1 project that will have elections: Cinder. -- TC Election Details -- The official candidate list is available on the election website[1]. Now begins the campaigning period where candidates and the electorate may debate their statements. Polling will start Sep 04, 2024 23:45 UTC. Thank you, [0] https://governance.openstack.org/election/#ptl-candidates [1] https://governance.openstack.org/election/#tc-candidates [2] https://governance.openstack.org/resolutions/20141128-elections-process-for…

1 0

[election][cloudkitty] PTL candidacy for the 2025.1 release cycle
by Rafael Weingärtner 28 Aug '24

28 Aug '24

Hi all, I would like to self-nominate for the role of PTL of CloudKitty for the 2025.1 release cycle. I have been PTL since the Victoria cycle and I am willing to continue in this role. I will keep working with existing contributors to maintain CloudKitty for their use cases and encourage the addition of new functionalities. I have opened the patch with my candidacy: https://review.opendev.org/c/openstack/election/+/927392 -- Rafael Weingärtner

1 0

[nova] Next Sep 3 meeting is CANCELLED
by Sylvain Bauza 28 Aug '24

28 Aug '24

I'll be traveling to the OpenInfra Asia Summit this week. See you there if you go too. Thanks, -Sylvain

1 0

[Glance][Image Encryption] Problem with data-migration in db
by Josephine Seifert 27 Aug '24

27 Aug '24

Hi, I am currently trying to implement the upgrade path for the image encryption in Glance. This should change all rows in the image_properties table where the names star with `cinder_encryption*` to `os_encrypt*` The patch is: https://review.opendev.org/c/openstack/glance/+/926905 When I try to execute the data-migration on my devstack it does not work. I wonder why? What do I have to do to make it work? Here is what I tried: ``` stack@devstack:~/devstack$ nano ../glance/glance/db/sqlalchemy/alembic_migrations/data_migrations/2024_2_migrate01_rename_encryption_metadata.py stack@devstack:~/devstack$ source /opt/stack/data/venv/bin/activate (venv) stack@devstack:~/devstack$ glance-manage db migrate 2024_2_migrate01 INFO dbcounter [-] Registered counter for database glance DEBUG oslo_db.sqlalchemy.engines [-] MySQL server mode set to STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,TRADITIONAL,NO_ENGINE_SUBSTITUTION {{(pid=1782997) _check_effective_sql_mode /opt/stack/data/venv/lib/python3.10/site-packages/oslo_db/sqlalchemy/engines.py:342}} DEBUG dbcounter [-] [1782997] Writer thread running {{(pid=1782997) stat_writer /opt/stack/data/venv/lib/python3.10/site-packages/dbcounter.py:102}} INFO alembic.runtime.migration [-] Context impl MySQLImpl. INFO alembic.runtime.migration [-] Will assume non-transactional DDL. Database is up to date. No migrations needed. (venv) stack@devstack:~/devstack$ glance-manage db sync INFO dbcounter [-] Registered counter for database glance DEBUG oslo_db.sqlalchemy.engines [-] MySQL server mode set to STRICT_TRANS_TABLES,STRICT_ALL_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,TRADITIONAL,NO_ENGINE_SUBSTITUTION {{(pid=1783029) _check_effective_sql_mode /opt/stack/data/venv/lib/python3.10/site-packages/oslo_db/sqlalchemy/engines.py:342}} DEBUG dbcounter [-] [1783029] Writer thread running {{(pid=1783029) stat_writer /opt/stack/data/venv/lib/python3.10/site-packages/dbcounter.py:102}} INFO alembic.runtime.migration [-] Context impl MySQLImpl. INFO alembic.runtime.migration [-] Will assume non-transactional DDL. Database is up to date. No migrations needed. (venv) stack@devstack:~/devstack$ openstack image show enc-cirros +------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Field | Value | +------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | checksum | 581caa530df8ceecfe5d4a87b847d8fa | | container_format | bare | | created_at | 2024-06-21T08:10:23Z | | disk_format | raw | | file | /v2/images/137d3237-3096-4b3f-b2c9-400819211b67/file | | id | 137d3237-3096-4b3f-b2c9-400819211b67 | | min_disk | 0 | | min_ram | 0 | | name | enc-cirros | | owner | db05e1116cb04ac689d82c738a5f103c | | properties | *cinder_encryption_key_deletion_policy*='on_image_deletion', *cinder_encryption_key_id*='cf3d7b02-c82c-4a95-b866-9a22af9f87f1', hw_rng_model='virtio', locations='[{'url': | ``` thank you Josephine (Luzi)

2 2

VM fails to start in OpenSUSE for aarch64
by Junya Noguchi (Fujitsu) 27 Aug '24

27 Aug '24

To whom it may concern I tried to use OpenSUSE aarch64 VM in OpenStack environment but failed. Do you know how to solve one of the following two problems? I look forward to your reply. 1. VM startup of OpenSUSE for OpenStack on ARM fails When I deployed a VM in an OpenStack environment using OpenSUSE 15.1 for OpenStack on ARM, the VM was successfully created but failed to start. When I checked the console log from the browser, it seems that the OS boot process is not completed. What could be the cause of this? OpenSUSE image "openSUSE-Leap-15.1-OpenStack.aarch64.qcow2" https://download.opensuse.org/repositories/Cloud:/Images:/Leap_15.2/images/… Status is Active +--------------------------------------+------------------------------+---------+ | ID | Name | Status | +--------------------------------------+------------------------------+---------+ | eb653de7-68b4-4fd8-9fe5-515d1753fd5f | OpenSUSE-Leap-Arm | ACTIVE | -------- console log -------- UEFI firmware (version edk2-20230524-4.el9_3.2 built at 00:00:00 on Feb 20 2024) Tpm2SubmitCommand - Tcg2 - Not Found Tpm2GetCapabilityPcrs fail! Tpm2SubmitCommand - Tcg2 - Not Found [2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01HBdsDxe: failed to load Boot0001 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x1,0x2)/Pci(0x0,0x0): Not Found BdsDxe: loading Boot0002 "EFI Internal Shell" from Fv(64074AFE-340A-4BE6-94BA-91B5B4D0F71E)/FvFile(7C04A583-9E3E-4F1C-AD65-E05268D0B4D1) BdsDxe: starting Boot0002 "EFI Internal Shell" from Fv(64074AFE-340A-4BE6-94BA-91B5B4D0F71E)/FvFile(7C04A583-9E3E-4F1C-AD65-E05268D0B4D1) [2J[01;01H[01;01HUEFI Interactive Shell v2.2 EDK II UEFI v2.70 (EDK II, 0x00010000) [1m[33m[40mMapping table[0m[37m[40m [1m[33m[40m BLK0:[0m[37m[40m [1m[37m[40mAlias(s):[0m[37m[40m PciRoot(0x0)/Pci(0x1,0x2)/Pci(0x0,0x0) [1m[33m[40m BLK1:[0m[37m[40m [1m[37m[40mAlias(s):[0m[37m[40m PciRoot(0x0)/Pci(0x1,0x2)/Pci(0x0,0x0)/HD(1,MBR,0xE6E9E590,0x800,0x13FF800) [09;01HPress [1m[37m[40mESC[0m[37m[40m in 5 seconds to skip [1m[33m[40mstartup.nsh[0m[37m[40m or any other key to continue.[09;01HPress [1m[37m[40mESC[0m[37m[40m in 4 seconds to skip [1m[33m[40mstartup.nsh[0m[37m[40m or any other key to continue.[09;01HPress [1m[37m[40mESC[0m[37m[40m in 3 seconds to skip [1m[33m[40mstartup.nsh[0m[37m[40m or any other key to continue.[09;01HPress [1m[37m[40mESC[0m[37m[40m in 2 seconds to skip [1m[33m[40mstartup.nsh[0m[37m[40m or any other key to continue.[09;01HPress [1m[37m[40mESC[0m[37m[40m in 1 seconds to skip [1m[33m[40mstartup.nsh[0m[37m[40m or any other key to continue. [10;01H[1m[33m[40mShell> [0m[37m[40m ----------------------------- 2. About Login with Non-OpenStack Images When I deployed a VM using an image without "OpenStack" in the image name, it booted successfully but I could not login. Is there a way to login to a VM created using an image like this? OpenSUSE image "openSUSE-Leap-15.2.aarch64-NoCloud" https://download.opensuse.org/repositories/Cloud:/Images:/Leap_15.2/images/… Best regards, Junya Noguchi.

2 4

[all][elections][ptl][tc] Combined PTL/TC 2025.1 cycle Election Nominations Last Days
by Sławek Kapłoński 27 Aug '24

27 Aug '24

Hi, A quick reminder that we are in the last hours for declaring PTL and TC candidacies. Nominations are open until Aug 28, 2024 23:45 UTC. If you want to stand for election, don't delay, follow the instructions at[1] to make sure the community knows your intentions. Make sure your nomination has been submitted to the openstack/election repository and approved by election officials. All members of the community are encouraged to confirm their email address and opt in to the CIVS election as described at: https://governance.openstack.org/election/#electorate Election statistics[2]: Nominations started @ 2024-08-14 23:45:00 UTC Nominations end @ 2024-08-28 23:45:00 UTC Nominations duration : 14 days, 0:00:00 Nominations remaining : 1 day, 16:27:24 Nominations progress : 87.96% --------------------------------------------------- Projects[1] : 41 Projects with candidates : 13 ( 31.71%) Projects with election : 0 ( 0.00%) --------------------------------------------------- Need election : 0 () Need appointment : 28 (Adjutant Barbican Cinder Cloudkitty Cyborg Designate Glance Heat Keystone Kuryr Magnum Manila Masakari Mistral Nova Octavia OpenStackAnsi ble OpenStackSDK Puppet_OpenStack Quality_Assurance Rally Skyline Storlets Swift Telemetry Venus Vitrage Watcher) --------------------------------------------------- TC Candidates : 3 (4 Required) =================================================== Stats gathered @ 2024-08-27 07:17:36 UTC This means that with approximately 2 days left, 28 projects will be deemed leaderless. In this case the TC will oversee PTL selection as described by [3]. Thank you, [1] https://governance.openstack.org/election/#how-to-submit-a-candidacy [2] Any open reviews at https://review.opendev.org/q/project:openstack/election+is:open+file:candid… have not been factored into these stats. [3] https://governance.openstack.org/resolutions/20141128-elections-process-for… -- Slawek Kaplonski Principal Software Engineer Red Hat

1 0

How to debug port down issue on kolla ansible
by William Muriithi 27 Aug '24

27 Aug '24

Hello I am stuck for days on network setup issues and would be grateful if you could provide any pointer on how best to proceed. We have an existed vlan based network. I would like to set up the openstack to be vlan based, that is, each project would be on a separate vlan. To achieve this, I went about doing this: - Converted the port connected to neutron_external_interface to trunk on the HP switch. I am planning to use openstack to provision VM on vlan 20 * Created network ->openstack network create --project=eng --provider-network-type=vlan --provider-physical-network=sriovtenant1 --provider-segment=20 eng --gateway 192.168.20.252 --dns-nameserver 192.168.20.1 * Created subnet -> openstack subnet create --network=eng --subnet-range=192.168.20.0/24 --allocation-pool start=192.168.20.1,end=192.168.20.220 --gateway 192.168.20.252 --dns-nameserver 192.168.20.1 eng_sub1 * Created port ->openstack port create --network eng --vnic-type=direct eng_port1 [kolla@ostack-40 tmp]$ openstack network show eng | grep provider | provider:network_type | vlan | | provider:physical_network | sriovtenant1 | | provider:segmentation_id | 20 | [kolla@ostack-40 tmp]$ The issue is however with port status. It always seems to be down: [kolla@ostack-40 tmp]$ openstack port show 511f54fb-d7f2-4e59-98db-8833bb4cf5e4 | grep -i status | data_plane_status | None | | propagate_uplink_status | None | | status | DOWN | [kolla@ostack-40 tmp]$ This is the globals.yml file we are using: --- config_owner_user: "kolla" config_owner_group: "kolla" workaround_ansible_issue_8743: yes openstack_release: "2024.1" kolla_internal_vip_address: "192.168.101.221" kolla_internal_fqdn: "example.openstack.exampletech.com" kolla_external_vip_address: "192.168.102.221" kolla_external_fqdn: "example.vm.exampletech.com" kolla_sysctl_conf_path: /etc/sysctl.d/100-kolla.conf kolla_container_engine: podman network_interface: "enp4s0f0" neutron_external_interface: "enp4s0f1" disable_firewall: "true" enable_external_api_firewalld: "false" enable_neutron_sriov: "yes" neutron_sriov_physnet_mappings: sriovtenant1: enp4s0f1 enable_neutron_dvr: "yes" openvswitch_hw_offload: "yes" enable_neutron_provider_networks: "yes" ceph_version: "reef" external_ceph_cephx_enabled: "yes" ceph_glance_user: "glance" ceph_glance_keyring: "client.{{ ceph_glance_user }}.keyring" ceph_glance_pool_name: "images" ceph_cinder_user: "cinder" ceph_cinder_keyring: "client.{{ ceph_cinder_user }}.keyring" ceph_cinder_pool_name: "volumes" ceph_cinder_backup_user: "cinder-backup" ceph_cinder_backup_keyring: "client.{{ ceph_cinder_backup_user }}.keyring" ceph_cinder_backup_pool_name: "backups" ceph_nova_keyring: "{{ ceph_cinder_keyring }}" ceph_nova_user: "{{ ceph_cinder_user }}" ceph_nova_pool_name: "vms" keystone_admin_project: "example" glance_backend_ceph: "yes" cinder_backend_ceph: "yes" nova_backend_ceph: "yes" We are certain sriov is working due to this observations: [root@ostack-40 ~]# cat /sys/class/net/enp4s0f1/device/sriov_totalvfs 63 [root@ostack-40 ~]# When I look for the string vlan, on the logs, I see this which implies that vlan seem to have been initialized fine. 2024-08-26 14:57:36.933 2 INFO neutron.plugins.ml2.drivers.type_vlan [-] Network VLAN ranges: OrderedDict([('sriovtenant1', [(9, 2000)])]) 2024-08-26 14:57:49.469 2 INFO neutron.plugins.ml2.drivers.type_vlan [None req-8326ea90-01d6-4de4-895c-5a37456e4dde - - - - - -] VlanTypeDriver initialization complete [root@ostack-40 ~]# grep -i "vlan " /var/log/kolla/neutron/neutron-server.log 2024-08-26 14:57:36.933 2 INFO neutron.plugins.ml2.drivers.type_vlan [-] Network VLAN ranges: OrderedDict([('sriovtenant1', [(9, 2000)])]) 2024-08-26 14:57:49.469 2 INFO neutron.plugins.ml2.drivers.type_vlan [None req-8326ea90-01d6-4de4-895c-5a37456e4dde - - - - - -] VlanTypeDriver initialization complete [root@ostack-40 ~]# grep -i vlan /var/log/kolla/neutron/neutron-server.log 2024-08-26 14:57:36.929 2 INFO neutron.plugins.ml2.managers [-] Configured type driver names: ['flat', 'vlan', 'vxlan'] 2024-08-26 14:57:36.933 2 INFO neutron.plugins.ml2.drivers.type_vlan [-] Network VLAN ranges: OrderedDict([('sriovtenant1', [(9, 2000)])]) 2024-08-26 14:57:36.933 2 INFO neutron.plugins.ml2.managers [-] Loaded type driver names: ['flat', 'vlan', 'vxlan'] 2024-08-26 14:57:36.934 2 INFO neutron.plugins.ml2.managers [-] Registered types: dict_keys(['flat', 'vlan', 'vxlan']) 2024-08-26 14:57:37.006 2 INFO neutron.plugins.ml2.managers [-] Initializing driver for type 'vlan' 2024-08-26 14:57:49.469 2 INFO neutron.plugins.ml2.drivers.type_vlan [None req-8326ea90-01d6-4de4-895c-5a37456e4dde - - - - - -] VlanTypeDriver initialization complete 2024-08-26 14:57:49.494 2 INFO neutron.extensions.vlantransparent [None req-72317867-444d-42a7-8421-2ef4460e9aed - - - - - -] Disabled vlantransparent extension. 2024-08-26 14:57:49.597 2 INFO neutron.api.extensions [None req-72317867-444d-42a7-8421-2ef4460e9aed - - - - - -] Extension vlan-transparent not supported by any of loaded plugins What could we possibly be missing? Regards, William

2 1

[tc][all] OpenStack Technical Committee Weekly Summary and Meeting Agenda (2024.2/R-5)
by Goutham Pacha Ravi 27 Aug '24

27 Aug '24

Hello Stackers, Milestone-3 of the 2024.2 ("Dalmatian") release cycle is upon us this week [1]. This milestone marks several code freeze deadlines. It's the feature freeze across all OpenStack projects that follow the "cycle-with-rc" release model [2], as well as a client library code freeze and a freeze for the global requirements and constraints. Please refer to Thierry Carrez (ttx)'s email regarding the release team's priorities for this week [3]. Alongside these significant release events, we're also wrapping up the nomination period for the combined PTL/TC Elections for the 2025.1 release cycle on 2024-08-28. If you have been considering nominating yourself for any of these leadership roles, please do not delay any further [4]. I'd like to congratulate the three Outreachy interns who successfully completed their internships this week. I encourage you to read about their experiences through their blogs. Abby Nduta (NdutaRed) [5] worked with Tatiana Ovchinnikova (tmazur) on OpenStack Horizon, while Mohd Ariq (tspyderboy) [6] and Christian Okeke Chima (ccokeke) [7] worked with Carlos Eduardo da Silva (carloss), Ashley Rodriguez (ashrodri), and me on Manila UI. Outreachy interns have been a valuable part of energizing and enriching this community over the years. Their journey in this community wouldn't be possible without generous sponsorship. Currently, the OpenStack community doesn't have funding to secure an intern for Outreachy Internships running between December 2024 and May 2025. If you're able to support this program, or know someone who can, please get in touch with the OpenStack Outreachy coordinators Mahati Chamarthy (mahatic) and Dmitri Tantsur (dtantsur) off-list. You can also ping us on OFTC's #openstack-outreachy channel. === Weekly Meeting === The last weekly meeting of the OpenStack Technical Committee was held on 2024-08-20. We focused most of this meeting on the implications of testing/shipping non-OSI licensed software within OpenStack. There was consensus that the current TC guidance regarding shipping binary artifacts [8] needs to be extended. A suggestion was made to disallow bundling non-OSI-compatible licensed software within binaries built, tested, and/or shipped/hosted on community infrastructure. We also discussed the need for a policy around reacting to integrated software whose licensing changes to a non-OSI-compatible license over time. This discussion gained prominence due to the Kolla project looking to ship a container image for the Masakari service that recently began supporting the use of HashiCorp's Consul [9]. Consul is one of several HashiCorp "open source" projects licensed under a "Business Source License" [10]. This was a very interesting discussion that involved a lot of questions; I recommend reading through the meeting log for the complete context [11]. Further policy discussion was tabled for an upcoming forum/PTG session with a wider audience. The next meeting of the OpenStack Technical Committee is on 2024-08-27 at 1800 UTC in OFTC's #openstack-tc channel. The agenda is on our meeting wiki [12]. Please consider joining us. Remember, you can always propose topics for this meeting; feel free to edit the wiki [12], but be sure to leave your IRC nickname so we can call on you. === Governance Proposals === ==== Merged ==== - Inactive state extensions: Monasca | https://review.opendev.org/c/openstack/governance/+/923919 - Update DPL model reset steps | https://review.opendev.org/c/openstack/governance/+/925926 - Opt-in the oslo DPL model for the 2025.1 cycle | https://review.opendev.org/c/openstack/governance/+/926154 ==== Open for Review ==== - Charms: Retire unmaintained charms | https://review.opendev.org/c/openstack/governance/+/926793 - Retire all single charm repositories | https://review.opendev.org/c/openstack/governance/+/903490 - Define testing runtime for the 2025.1 release | https://review.opendev.org/c/openstack/governance/+/926150 === Upcoming Events === - 2024-08-28: Nomination period closes for 2025.1 OpenStack PTL+TC elections - 2024-08-29: Dalmatian-3 milestone - 2024-09-03: OpenInfra Summit Asia, Suwon - 2024-09-06: OpenInfra Days, Tokyo - 2024-09-10: OpenInfra Board Meeting: https://board.openinfra.dev/ Thank you very much for reading! On behalf of the OpenStack TC, Goutham Pacha Ravi (gouthamr) OpenStack TC Chair [1] Release Schedule: https://releases.openstack.org/dalmatian/schedule.html [2] Cycle-with-RC release model: https://releases.openstack.org/reference/release_models.html#cycle-with-rc [3] Release countdown for week R-5: https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack… [4] How to submit a candidacy: https://governance.openstack.org/election/#how-to-submit-a-candidacy [5] Abby Nduta's Outreachy Blog: https://dev.to/ndutared/ [6] Mohd Ariq's Outreachy Blog: https://medium.com/@tspyderboy [7] Christian Okeke Chima's Outreachy Blog: https://dev.to/ccokeke/ [8] TC Guidelines for Managing Releases of Binary Artifacts: https://governance.openstack.org/tc/resolutions/20170530-binary-artifacts.h… [9] License question - OpenStack Masakari: https://lists.openstack.org/archives/list/legal-discuss@lists.openstack.org… [10] HashiCorp licensing: https://www.hashicorp.com/license-faq [11] TC Meeting IRC Log, 2024-08-20: https://meetings.opendev.org/meetings/tc/2024/tc.2024-08-20-18.00.log.html [12] TC Meeting Agenda, 2024-08-27: https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting

1 0

[all] Please remove sphinxcontrib-*diag from your (docs) dependencies
by Stephen Finucane 26 Aug '24

26 Aug '24

o/ A large number of projects are using the sphinxcontrib-blockdiag, sphinxcontrib- nwdiag and sphinxcontrib-seqdiag projects in their documentation. These packages are no longer maintained and have not seen releases in over 3 years. They are also not compatible with Pillow 10.x and are thus preventing us from bumping Pillow to a version that has pre-built Python 3.12 wheels [1][2]. Please remove these dependencies. In Nova, we decided to just take the build assets (SVG or PNG) and use these directly in our documentation [3]. Absent a better idea, this approach will work for you also. As someone with Python 3.12 (and soon, 3.13) as their default Python version, I would reallyu like to get Pillow bumped early in E, so by doing this work now we avoid broken docs CI jobs when that bump happens. Cheers, Stephen [1] https://review.opendev.org/c/openstack/requirements/+/927102 [2] https://bugs.launchpad.net/ironic/+bug/2026345 [3] https://review.opendev.org/c/openstack/nova/+/906309

1 0