February 2024 - openstack-discuss

Re: Enabling external connectivity to VMs
by Eugen Block 29 Feb '24

29 Feb '24

Please don't drop the list from your response. I'm not very familiar with kolla, but if you're able to ping the instance via floating IP it seems okayish. Maybe you need to set neutron_external_interface to ens192 instead? Someone with more kolla experience will probably correct me here, so don't rely on my response. Zitat von KK CHN <kkchn.in(a)gmail.com>: > Hi Eugen, > > I have followed the > https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro… > > But mistakenly I have configured ens160 as neurton_external_interface: > "ens160" as the docs says an interface without IP address needed so I > create a vNIC ens160 without IP and used this without knowing What I am > doing..!!!! > > The issue is tenant VMs don't get Internet. also tenant VMs cant ping > base VM(Ubuntu 22.04 IP 10.220.0.51, or 10.176.16.128 .. ) totally > confused. > > > Could you help me to understand what I am doing wrong here ? > Greetings > Krish. > > *For more info what I have done so far : * Please refer to > the following... > > In the Base VM, I created 3 vNICs. > > 1. ens192 with my Org's dhcp LAN IP 10.176.16.128 which has the internet. > 2. ens224 with 10.220.0.51 IP which is a VLAN IP of (10.220.0.0/24) which > is created for testing purposes internally by N/W guy. This doesn't have > the internet.. > > 3. ens160 up active without IP address. ( Wrongly I specified this as the > e neutron_external_interface in globals.yml) > > > > *I have deployed the openstack..Everything up and running .. * > I am able to create Routers, Network and subnets and able to create > instances(all VMs spawning with 10.0.0.0/24 IPs) > > I created the networks(external with subnet 10.220.0.0/24 with > start=10.220.0.30 to end=10.220.0.50) and internal Network(with subnet > named demo-net 10.0.0.0/24 for tenants) > > I am able to associate the VMs with 10.0.0.0/24 IPs to Floating IPs from > 10.220.0.0/24 > > and from my Base(host) VM(Ubuntu22.04 with ens224 10.220.0.51) I am able > to ping the 10.0.0.28 tenant VM IP through the associated floating IPs as > > $ ip netns ( On base (host) VM) dsplays the router > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ ip netns > qrouter-ecc6fe39-a733-4f30-bf67-ac42407227f8 (id: 1) > > qdhcp-c29f26ac-3594-4c40-bf20-f2d5ba7d6eea (id: 0) > > > $(kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ sudo ip netns exec > qrouter-ecc6fe39-a733-4f30-bf67-ac42407227f8 ping 10.0.0.28 ( the VM > tenant IP address) > PING 10.0.0.28 (10.0.0.28) 56(84) bytes of data. > 64 bytes from 10.0.0.28: icmp_seq=1 ttl=64 time=0.972 ms > > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ sudo ip netns exec > qrouter-ecc6fe39-a733-4f30-bf67-ac42407227f8 ping 10.220.0.44 ( the > Floating IP associated to 10.0.0.28 VM) > PING 10.220.0.44 (10.220.0.44) 56(84) bytes of data. > 64 bytes from 10.220.0.44: icmp_seq=1 ttl=64 time=0.840 ms > 64 bytes from 10.220.0.44: icmp_seq=2 ttl=64 time=0.599 ms > > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ sudo ip netns exec > qrouter-ecc6fe39-a733-4f30-bf67-ac42407227f8 ping 10.220.0.33 ( The router > IP through which connects floating ip 10.220.0.44 and then to tenant VM ip > 10.0.0.28 ) > > PING 10.220.0.33 (10.220.0.33) 56(84) bytes of data. > 64 bytes from 10.220.0.33: icmp_seq=1 ttl=64 time=0.038 ms > > *Hence it works somehow. * But ens224 10.220.0.51 doesn't have > internet on the base VM. But only ens192->10.170.16.128 IP has.. > > How can I provide the internet connectivity of ens192 to ens224 Is this > possible or Am I doing some dump here.? What is the other way / best way > to do this .. > I am beginning my journey with OpensStack but stuck here without much > progress.. > > > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ grep ^[^#] /etc/kolla/globals.yml > --- > workaround_ansible_issue_8743: yes > config_strategy: "COPY_ALWAYS" > kolla_base_distro: "ubuntu" > openstack_release: "2023.1" > kolla_internal_vip_address: "10.220.0.24" > kolla_external_vip_address: "{{ kolla_internal_vip_address }}" > kolla_container_engine: docker > network_interface: "ens224" > neutron_external_interface: "ens160" > neutron_plugin_agent: "openvswitch" > nova_compute_virt_type: "qemu" > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ > > > The following screenshot shown the tenant VM console(tty) where I am able > to ping floating IP(10.220.0.44 and its router ip 10.220.0.33 ) but > neither 10.220.0.51 the base VM ens224 IP nor ens192 10.17.16.128 > > > [image: image.png] > > > > krish > > On Tue, Feb 27, 2024 at 11:09 PM Eugen Block <eblock(a)nde.ag> wrote: > >> Hi, >> >> Check out this page: >> >> >> https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro… >> >> You need some sort of external network to provide connectivity for >> instances. >> >> Zitat von KK CHN <kkchn.in(a)gmail.com>: >> >> > List, >> > >> > I am a bit confused with the OpenStack Networking configuration for >> > Created virtual machines on a (Kolla-ansible all-in-one on an Ubuntu >> > 22.04 VM ) openstack installation. >> > >> > I am able to create virtual machines through the dashboard as well as >> CLI. >> > I have used the default network/cirros images created from init-runonce >> > script. >> > >> > But Real time, how can I configure these new VMs to communicate with Base >> > VM or external world by ping, ssh or make internet connection etc. >> > >> > Base VM is Ubuntu22.04 - with IPs ens192=>10.170.16.128(with Internet), >> > second interface => ens224 => 10.220.0.51 and ens160 up and running >> > without IP address for neutron_external_interface: >> > >> > All the VMs which I created getting IP addresses in series (10.0.0.X). >> > >> > But How to allocate Internet and make external world communication to >> and >> > from these VMs ? >> > >> > >> > Any hints/directions towards this much appreciated. >> > >> > Greetings, >> > Krish >> > >> > >> > If required more inputs here follows the additional information. >> > >> > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ grep ^[^#] >> /etc/kolla/globals.yml >> > --- >> > workaround_ansible_issue_8743: yes >> > config_strategy: "COPY_ALWAYS" >> > kolla_base_distro: "ubuntu" >> > openstack_release: "2023.1" >> > kolla_internal_vip_address: "10.220.0.24" >> > kolla_external_vip_address: "{{ kolla_internal_vip_address }}" >> > kolla_container_engine: docker >> > network_interface: "ens224" >> > neutron_external_interface: "ens160" >> > neutron_plugin_agent: "openvswitch" >> > nova_compute_virt_type: "qemu" >> > (kolla_ansible_venv3) ubuntu@ubuntu-VM:~$ >> > >> > >> > >> > Additional inputs: >> > >> > There are 3 virtual interfaces on the base Ubuntu22.04 Virtual Machine. >> > ens192->10.170.16.128 with internet, ens224->10.220.0.51 , ens160 up >> > without IP >> > >> > 1. First Interface contain IP address from My organizations DHCP lease >> from >> > LAN(10.16.16.0) Which has Internet connectivity. >> > ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP >> group >> > default qlen 1000 link/ether 00:0c:29:33:18:3c brd ff:ff:ff:ff:ff:ff >> > altname enp11s0 >> > inet 10.170.16.128/23 brd 10.170.17.255 scope global dynamic >> noprefixroute >> > ens192 >> > valid_lft 786963sec preferred_lft 786963sec >> > inet6 fe80::cd1a:bc6c:b129:f91f/64 scope link noprefixroute >> > valid_lft forever preferred_lft forever3 >> > >> > >> > 2. Interface I have 10.220.0.51 >> > >> > ens224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP >> group >> > default qlen 1000 >> > link/ether 00:0c:29:33:18:46 brd ff:ff:ff:ff:ff:ff >> > altname enp19s0 >> > inet 10.220.0.51/24 brd 10.220.0.255 scope global noprefixroute >> ens224 >> > valid_lft forever preferred_lft forever >> > inet 10.220.0.24/32 scope global ens224 >> > valid_lft forever preferred_lft forever >> > inet6 fe80::a8b6:f094:c47:8282/64 scope link noprefixroute >> > valid_lft forever preferred_lft forever >> > >> > 3. ens160 without any IP address which is up and running configured for >> > Kolla neutron_external_interface: "ens160" >> > >> > ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master >> > ovs-system state UP group default qlen 1000 >> > link/ether 00:0c:29:33:18:32 brd ff:ff:ff:ff:ff:ff >> > altname enp3s0 >> > >> > >> > >> > 1. What networks need to be created additionally ? >> > 2. Bridges and bonds required here or not ? >> > >> > 3. To enable these New VMs to talk to external world( ssh, ping, internet >> > connection to all these VMs ) what all the steps need to be performed or >> I >> > left out ? >> >> >> >>

1 0

[oslo][release][requirement] FFE request for oslo.context
by Takashi Kajinami 29 Feb '24

29 Feb '24

Hello, I'd like to request an exception to merge a change[1] to oslo.context and create a new stable/2024.1 release. This change is required to fix the problem which is current blocking us from bumping oslo.messaging to the final 2024.2 release version (14.7.0)[2]. The change is small and has quite limited impact. I've tested the modification locally and confirmed it fixes the heat unit tests. [1] https://review.opendev.org/c/openstack/oslo.context/+/910153 [2] https://review.opendev.org/c/openstack/requirements/+/909906 -- Takashi Kajinami irc: tkajinam github: https://github.com/kajinamit launchpad: https://launchpad.net/~kajinamit

3 4

[magnum] Dropping default Cluster API driver
by Mohammed Naser 29 Feb '24

29 Feb '24

Hi everyone, It seems that based on a recent post that I saw on the Twitter-sphere[1], it seems that the Magnum team has decided to move forward with setting a default driver for the Cluster API. I don't agree with this. Unfortunately, we don't have much recordings of our PTG conversations, and since the notes on the PTG are pretty light[2], I don't see any details of that. I don't see why we should be merging a native Cluster API driver and not allowing the operators and deployment tools decide which one they want to support. Personally, I think that the Helm driver should be built in a separate repository and then installed by the user as a Python package once they understand what are the backends and their options, as opposed to shipping one out of the box with far less features. We already have successful users which are using our implementation in production that have also posted blogs and shared their experience, we'd be doing them a disservice by now announcing a 'native' built-in driver. Can the decision be changed so that there is no built-in driver, and you must decide to install one yourself? Also, I would be really happy to hear feedback from users of the driver for their comments here. Thanks, Mohmamed [1]: https://www.stackhpc.com/magnum-clusterapi.html [2]: https://etherpad.opendev.org/p/r.5b94a5a9dbf4e3bf8202b5e57cb93770

19 34

[ptl][election][trove] PTL candidacy for 2024.2
by chunyang wu 29 Feb '24

29 Feb '24

Hello everyone: I would like to announce my candidacy for PTL of the Trove project for the 2024.2 cycle. For the Dalmatian cycle, i'd like to focus on the following: * review the coming patches * Add more tempest tests * Add CI tests for the latest datastore(mysql, mariadb, postgresql) version * improve docs thanks wu.chunyang

2 2

[all][elections][tc] TC Election Campaigning Kickoff
by Ian Y. Choi 29 Feb '24

29 Feb '24

Developers, The TC Election Campaigning Period has now started[1]. During the next couple days, you are all encouraged to ask the candidates questions about their platforms[2], opinions on OpenStack, community governance, and anything else that will help you to better determine how you will vote. This is the time to raise any issues you wish the future TC to consider, and to evaluate the opinions of the nominees prior to their election. Candidates, Each of you has posted a platform[2], and announced your nomination to the developers. From this point, you are encouraged to ask each other questions about the posted platforms, and begin discussion of any points that you feel are particularly important during the next cycle. While you are not yet TC members, your voices and opinions about the issues raised in your platforms and questions raised by the wider community will help ensure that the future TC has the widest possible input on the matters of community concern, and the electorate has the best information to determine the ideal TC composition to address these and other issues that may arise. [1] https://governance.openstack.org/election/ [2] https://opendev.org/openstack/election/src/branch/master/candidates/2024.2/…

1 0

[all][elections][ptl][tc] Combined PTL/TC 2024.2 cycle Election Nominations End
by Ian Y. Choi 29 Feb '24

29 Feb '24

The PTL and TC Nomination period is now over. The official candidate lists for PTLs [0] and TC seats [1] are available on the election website. -- PTL Election Details -- There are 11 projects without candidates, so according to this resolution[2], the TC will have to decide how the following projects will proceed: Ec2_Api, Freezer, Kuryr, Murano, OpenStack_Charms, Sahara, Senlin, Skyline, Solum, Trove, Watcher There are 0 projects that will have elections: . -- TC Election Details -- The official candidate list is available on the election website[1]. Now begins the campaigning period where candidates and electorate may debate their statements. Polling will start Mar 06, 2024 23:45 UTC. Thank you, [0] https://governance.openstack.org/election/#2024.2-ptl-candidates [1] https://governance.openstack.org/election/#2024.2-tc-candidates [2] https://governance.openstack.org/resolutions/20141128-elections-process-for…

1 0

Ansible performance
by Gk Gk 28 Feb '24

28 Feb '24

Hi, Is there any way to speedup the playbooks execution of openstack ansible ? Can we remove gather facts for any tasks without affecting the installation ?

5 4

Ansible variables
by Gk Gk 28 Feb '24

28 Feb '24

Hi, We have an OSA setup. During a service playbook, for example, say rabbitmq, which task or play is responsible for creating it's haproxy configuration ? I mean, where is the code in openstack ansible to say to gather the values from user_variables file for that particular service or gather it from conf.d ? For instance, for rabbitmq service, where is the code which says to get the rabbitmq management port for the backend to be 15671 ? I mean where is the source code for pulling it from user_variables file and also which variable from it ?

3 2

[ptl][election][barbican] PTL Candidacy for 2024.2
by Grzegorz Grasza 28 Feb '24

28 Feb '24

Hello, I would like to propose my candidacy for Barbican PTL in the 2024.2 cycle. I've been the PTL since Antelope and I would like to continue to contribute in this role. As in the past cycles, I will continue to focus on Barbican maintenance and stability. Thanks you for your consideration, Grzegorz Grasza (xek)

1 0

[election][cloudkitty] PTL candidacy for the 2024.2 release cycle
by Rafael Weingärtner 28 Feb '24

28 Feb '24

Hi all, I would like to self-nominate for the role of PTL of CloudKitty for the 2024.2 release cycle. I have been PTL since the Victoria cycle and I am willing to continue in this role. I will keep working with existing contributors to maintain CloudKitty for their use cases and encourage the addition of new functionalities. I have opened the patch with my candidacy: https://review.opendev.org/c/openstack/election/+/910519 -- Rafael Weingärtner

1 0