December 2024 - openstack-discuss

about accelerating database initialization
by Jiatong Shen 08 Dec '24

08 Dec '24

Hello all, I am trying to find out if there are ways to accelerate the database initialization process. We are using openstack-helm for deployment victoria OpenStack cluster and internally openstack-helm uses nova-manage db sync command to bootstrap the database. It works but a little bit slower than expected. Right now, I am measuring this bootstrap command could took around 2 minutes to complete. I'd like to get some advices on accelerating the process as well as what is the reasonable time to have. Thank you very much for your insights. -- Best Regards, Jiatong Shen

2 1

[HORIZON] configure for multiple labs at once
by Ishan Shanware (ishanwar) 08 Dec '24

08 Dec '24

Hey Stackers, I wanted to know if it’s possible to view the horizon dashboard for multiple openstack labs at once from the same UI ? thanks Ishan

3 2

[Kolla] Transition Yoga and Zed to EOL
by Jakub Darmach 05 Dec '24

05 Dec '24

Hello, As agreed during the latest IRC meeting, Kolla Yoga and Zed deliverables (Kolla, Kolla-Ansible, Kayobe) are going EOL. [1] Antelope remains as unmaintained, while Bobcat, Caracal and Dalmatian are our current stable releases. Yoga and Zed branches were unmaintained for a while, Kolla community does not have resources to support those branches actively. All changes to those branches have been abandoned. [1] https://review.opendev.org/c/openstack/releases/+/937101 Best regards, *Jakub Darmach*

1 0

Open Stack APIs
by darsh.mehta＠crestdata.ai 05 Dec '24

05 Dec '24

Hello, We want to create an integration with OpenStack for which we require the REST APIs to connect to OpenStack. However, OpenStack provides 2 offerings i.e. Cloud and On-Prem. We are referring to the OpenStack API documentation available over here https://docs.openstack.org/api-quick-start/api-quick-start.html#. But it does not specify anywhere whether the APIs are for cloud or on-prem. Are the APIs same for both or do we have separate documentation for each of these? Thanks in advance!

4 3

[Neutron] WSGI migration issues and eventlet requirements bump
by Rodolfo Alonso Hernandez 05 Dec '24

05 Dec '24

Hello Neutrinos: There is a patch [1] that is trying to bump the eventlet upper version. However, the tempest job is failing because of Neutron. There is a series of patches [2][3][4][5] that are trying to address the problems we are having with the migration to WSGI. I would ask you to review them soon in order to unblock the requirements patch. On top of this series there is a testing patch with several tempest jobs running. We still have some problems but they are limited. Thanks! [1]https://review.opendev.org/c/openstack/requirements/+/933257 [2]https://review.opendev.org/c/openstack/neutron/+/936428 [3]https://review.opendev.org/c/openstack/neutron/+/936813 [4]https://review.opendev.org/c/openstack/neutron/+/936838 [5]https://review.opendev.org/c/openstack/neutron/+/934409

1 0

OpenStack is Now on Bluesky
by Helena Spease 05 Dec '24

05 Dec '24

Hello Everyone, We’re thrilled to announce that OpenStack and the OpenInfra Foundation now have a presence on Bluesky! This is part of our continued effort to connect with our community and share updates in new and engaging ways. Here’s where you can now find us: - OpenStack on Bluesky: https://bsky.app/profile/openstack.org - OpenInfra Foundation on Bluesky: https://bsky.app/profile/openinfra.org Don’t forget, that OpenStack is already active on these platforms: - Mastodon: https://social.openinfra.dev/@OpenStack - Twitter: https://x.com/OpenStack - LinkedIn: https://www.linkedin.com/company/openstack/ And, the OpenInfra Foundation is already active on these platforms: - Mastodon: https://social.openinfra.dev/@OpenInfra - Twitter: https://x.com/openinfradev - Facebook: https://www.facebook.com/openinfradev - LinkedIn: https://www.linkedin.com/company/openinfra-foundation Join the conversation and engage with the OpenInfra community wherever you are most active! Cheers, Helena helena(a)openinfra.dev Community Programs Coordinator The OpenInfra Foundation <https://openinfra.dev/>

1 0

OSA adding compute without deploy host
by Derek O keeffe 05 Dec '24

05 Dec '24

Hi all, I have a controller and 2 compute setup that was deployed some time ago with OSA. It's been running fine since it was deployed but we now have the need for more compute and I was looking at the deploy host to add a compute host to the cluster. Unfortunately it seems the deploy host was repurposed and I have lost all the config. So two questions, 1) Is it possible to manually add a compute to the cluster (I fairly confident this is a yes) and 2) if so is there any documentation or how to that someone could point me to/share? any help would be greatly appreciated. Regards,Derek

2 2

[kolla-ansible][neutron][openvswitch]
by Adam Tomas 04 Dec '24

04 Dec '24

Hi everyone. I have strange problem with neutron ml2 plugin. I have a little strange setup: controllers in networkA/subnetA computesA in networkA/subnetA computesB in networkB/subnetB (separate L2, controllers can be connected via routing) Because computesB are on different LAN I had to put on two computes in that lan neutron-dhcp-agents and add them to networks served for instances in locationB. In addition aggregates are created so, that if an instance has network from locationB then it has to start on computes in locationB. computes and controllers have one flat network (vlan 21) ans three vlan networks (221, 51 and 251),, vlans 21 and 221 are in locationA, 51 and 251 in locationB, the ml2_plugin is configured like below: [ml2_type_vlan] network_vlan_ranges = physnet1:221:221,physnet2:51:51,physnet3:251:251 bond0 is the neutron_external_interface and has vlan 21 as native and 221,51 and 251 as tagged vlans. Openstack networks are mapped to corresponding physnets. dhcp_agents in location A are working without any problems, vm's are started without any problem in vlans 21 and 221 with addresses from all subnets from networks in these vlans. In location B when I add dhcp_agent the port is doen (namespaces qdhcpxxxxxxxxx are created on computesB and are replying to their own address, but not the gateway or any other address), port status of dhcp_agent is DOWN, and in logs I have: Device Port(admin_state_up=True,allowed_address_pairs=[],binding_levels=[],bindings=[PortBinding],created_at=2024-12-01T17:52:25Z,data_plane_status=None,description='',device_id='dhcpfd2f8da2-397b-5456-a75c-f9c5bbccb8b1-81b9ac42-6267-48e2-8352-0ae5c09d85fa',device_owner='network:dhcp',device_profile=<?>,dhcp_options=[],distributed_bindings=[],dns=None,fixed_ips=[IPAllocation,IPAllocation],hints=None,id=08c60b9d-ea8f-4a2d-a3b7-5f787d15f45d,mac_address=fa:16:3e:37:27:0c,name='',network_id=81b9ac42-6267-48e2-8352-0ae5c09d85fa,numa_affinity_policy=<?>,project_id='c0e2f3d69c064ae5b5596fd150d550d7',qos_network_policy_id=None,qos_policy_id=None,revision_number=2,security=PortSecurity(08c60b9d-ea8f-4a2d-a3b7-5f787d15f45d),security_group_ids=set([]),status='DOWN',updated_at=2024-12-01T17:52:25Z) is not bound. Device 08c60b9d\-ea8f\-4a2d\-a3b7\-5f787d15f45d not defined on plugin or binding failed Port 08c60b9d-ea8f-4a2d-a3b7-5f787d15f45d cannot update to ACTIVE because it failed. _port_provisioned /var/lib/kolla/venv/lib/python3.10/site-packages/neutron/plugins/ml2/plugin.py:357 Why the same configuration works in LocationA? In location B the same situation is with all ports - even if I create a port "by hand". The error message (in debug mode!) says not much - Device 08c60b9d\-ea8f\-4a2d\-a3b7\-5f787d15f45d not defined on plugin or binding failed, how can I find what is wrong? I would appreciate any help. Best regards, Adam Tomas

1 1

[kolla-ansible][nova] Refresh cell cache in nova scheduler
by Satish Patel 04 Dec '24

04 Dec '24

Folks, What is wrong here, I do have the following hostname resolvable from all the nodes even if they are in the /etc/hosts file, Why is the following task saying UNREACHABLE and from where its trying to reach ? PLAY [Refresh nova scheduler cell cache] ***************************************************************************************************************************************************** TASK [nova : Refresh cell cache in nova scheduler] ******************************************************************************************************************************************* fatal: [os2-bos-ctrl01]: UNREACHABLE! => {"changed": false, "msg": "Data could not be sent to remote host \"os2-bos-ctrl01\". Make sure this host can be reached over ssh: ", "unreachable": true} fatal: [os2-bos-ctrl02]: UNREACHABLE! => {"changed": false, "msg": "Data could not be sent to remote host \"os2-bos-ctrl02\". Make sure this host can be reached over ssh: ", "unreachable": true} fatal: [os2-bos-ctrl03]: UNREACHABLE! => {"changed": false, "msg": "Data could not be sent to remote host \"os2-bos-ctrl03\". Make sure this host can be reached over ssh: ", "unreachable": true}

4 5

[octavia] [lbaas] [ovs] Is octavia sr-iov supporting tunnels?
by yardalgedal＠gmail.com 04 Dec '24

04 Dec '24

Hi, Openstack Team, Is new octavia sr-iov feature supporting vxlan tunnels like in ovs or it can work only with provider networks (vlan)?

3 2