October 2024 - openstack-discuss - lists.openstack.org

[kolla] [openeuler] CI jobs status
by Michał Nasiadka 26 Nov '24

26 Nov '24

Hello Koalas, OpenEuler jobs in master (to be Antelope) are failing for a long time. If no one is interested in maintaining OpenEuler support in Kolla-Ansible - I will propose dropping it’s support on Wednesday Kolla meeting. Best regards, Michal

4 3

[horizon][ceph] object storage container storage policy missing
by Satish Patel 25 Nov '24

25 Nov '24

Folks, Openstack Release: Zed Recently I have integrated ceph RGW service with openstack/keystone and testing with command line tool "openstack container create foo1" and it works but when I go to Horizon UI I am seeing it doesn't have storage policy dropdown list and because of that I am not able to create container or upload file from Horizon GUI https://ibb.co/KhYW6Rd It works with commands like but not horizon. $ openstack container create foo1 +---------------------------------------+-----------+------------------------------------------------+ | account | container | x-trans-id | +---------------------------------------+-----------+------------------------------------------------+ | AUTH_d4d82849885e4126aef402c408ad2c5c | foo1 | tx00000c057454841b13497-0065b558b4-42ff2eb-ahm | +---------------------------------------+-----------+------------------------------------------------+ $ openstack container list +------+ | Name | +------+ | foo1 | +------+

2 2

[ironic][networking] Interest in starting a baremetal networking working group?
by Julia Kreger 21 Nov '24

21 Nov '24

Greetings folks, During the PTG this past week, the Ironic community including developers and operators reached a conclusion that we need to start back up a networking focused working group to try and move the current state of capabilities forward when bare metal machines are involved. Specifically, management of physical switch connections to bare metal *and* programming DPU/IPU devices for networking attachments. As we're all quite aware, it is a complex topic with many different threads. Given resurgent interest and a mutual desire to find some better solutions, it just makes sense to have regular discussions. That being said we need to identify an ideal day of week, frequency, and preferred time. I'd recommend sometime between 1500 UTC and 1800 UTC. Preferably a Tuesday or Wednesday. Would every two weeks work? Or would folks prefer to meet weekly to try and build the most possible velocity through regular interaction? Thoughts? -Julia

10 16

[ironic] Having issue with deploying ISO image to node
by James Leong 18 Nov '24

18 Nov '24

Hi all, I am trying to play around with ironic, and I am having an issue with deploying an Ubuntu 20.04 ISO image onto my bare metal node. Since I am quite new to bare metal, I am not entirely sure what went wrong as I couldn't find any error messages shown on my log file (ironic-conductor, ironic-api, ironic_neutron_agent, and nova-compute-ironic). This might be my guess; the ironic inspection is hitting timeout, which is causing the deployment to timeout. However, I have no idea why the inspection is failing at timeout. Any help would be appreciated. Best, James

6 7

[horizon] SCSS compilers
by Radomir Dopieralski 15 Nov '24

15 Nov '24

The openstack dashboard uses scss for styling, and so far we have used a python scss library for compiling those files to css for use in the browser. However, that library (pyscss) had in recent years some problems, and is not developed or supported by the authors anymore. So it's time to switch to something with a better support. The django-compressor plugin that we use for handling the compilation of files allows us to use any command-line tool to do the compilation, so we can switch to an scss compiler that is supported and used by the wider community. However, there are several options we can choose from: sassc python-libsass pysassc ruby-sass ruby-sassc node-node-sass Each of those would introduce a non-python dependency on the dashboard. The question for the packagers and distro maintainer is which of those tools would be preferable in terms of support, packaging, and maintenance for the long term? Do you have opinions? Maybe there is another tool that would be even better that I didn't find?

2 3

[OpenStack-Ansible] Major Upgrade from Yoga to Zed/Antelope
by Roby G 12 Nov '24

12 Nov '24

Hello everyone, Current environment: - Ubuntu 20.04 - OpenStack-Ansible Yoga - no LXC, services are installed bare metal - `install_method` is `distro` My goal is to upgrade this environment to Zed, or skip Zed and upgrade directly to Antelope, since Zed is also in Unmaintained state. What would you recommend? Which order should I follow - upgrade operating system or OpenStack first? The decision is a bit difficult as all 3 releases (Yoga, Zed and Antelope) support different Ubuntu versions in install_method distro and not the same one.

2 1

[kolla-ansible]: guidance needed for neutron setup
by turkey automation 12 Nov '24

12 Nov '24

Hey folks, I am new to Openstack and want to try it on KVM setup with 1 controller and 2 compute VMs. In my first attempt, I was able to install Openstack using kolla-ansible(2024.1 version) and also run-initonce completed without any issues. Now, I want to create instances that can access my back-bone i.e. KVM virtual network(192.168.121.x/24) but either floating IP concept or extending my KVM network to openstack(I don't know if it's feasible!) Some info about my infra: a. Controller 1: Interface eth0 has 192.168.121.5 IP address. eth1 has no IP. b. compute 1: Interface eth0: 192.168.121.10, eth1 has no IP. c. compute 2: interface eth0: 192.168.121.15, eth1 has no IP. What configuration do I need to enable in globals.yml and what all I need to do post deployment of openstack to ensure I have virtual instances on openstack that have IPs from 192.168.121.x network(dhcp can be controlled by KVM network?) and are accessible from other KVM based VMs that I created outside of openstack. I am a learner to please be elaborate if possible. Thanks in advance to the community. - Best regards!

3 6

Upstream Oslo IRC Meetings Are Back.
by Daniel Bengtsson 12 Nov '24

12 Nov '24

Hello everyone, I hope you are all doing well! I sent an email a while ago to reestablish the Upstream Oslo IRC meetings. With the removal of Eventlet, this makes even more sense. I have received two positive responses, and we also mentioned it during the PTG last week. I propose to hold these meetings every other Monday, starting today, at 4:00 PM UTC. Does this work for everyone? Thank you for your feedback! -- Daniel Bengtsson Software engineer

6 18

#eventlet-removal - OFTC IRC meeting time slot poll - Express your choice!
by Herve Beraud 12 Nov '24

12 Nov '24

Hey Stackers, We propose to schedule a one hour OFTC IRC meeting (#opentack-eventlet-removal) each first and third week of each month. Let's find together the right UTC time slot for our one hour OFTC IRC meeting. Once the vote is done, meetings will be scheduled each first and third <selected time slot in the poll> of each month. Please, vote here: https://framadate.org/rUghO3j6ZkRhKD7m Votes will be considered as closed by Nov. 8th First meeting will be forced to 4pm UTC on Tuesday Nov 5th and then moved to the selected time slot for all the following meetings. See the proposed time slots in the poll link above. Join us on the #opentack-eventlet-removal OFTC IRC channel. Thanks in advance for your votes -- Hervé Beraud Senior Software Engineer at Red Hat irc: hberaud https://github.com/4383/

1 2

OpenStack Cinder - Volume-ID in cinder DB
by Harsh Ailani 12 Nov '24

12 Nov '24

Hello contributors, I am working on clone operation for a volumegroup and in that the volume ID auto-generated by OpenStack is not the one with which the clone volumes are being created on my IBM storage backend. This is as per design that IBM Storage backend will take the source-volume ID in the source-volumegroup and add a suffix to it while cloning. Now since there is a mismatch in the IDs between cinder and storage backend, because of which I am unable to perform any volume operations on this cloned volume. So, I was wondering if I can change the volume ID in cinder DB? I know that it’s a unique key and there is a limit of 36 characters for this field in cinder DB, but since I cannot change the volume in storage backend, I wanted to check if there is a way I can alter the volume ID in cinder DB? Kindly share your thoughts/suggestions on this matter. Thanks and Regards, Harsh Ailani

2 4