January 2024 - openstack-discuss - lists.openstack.org

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 23 Apr '25

23 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 22 Apr '25

22 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat.| Openstack tripleo wallaby version
by Swogat Pradhan 24 Dec '24

24 Dec '24

Hi, I am currently trying to deploy openstack wallaby using tripleo arch. I created the network jinja templates, ran the following commands also: #openstack overcloud network provision --stack overcloud --output networks-deployed-environment.yaml custom_network_data.yaml # openstack overcloud network vip provision --stack overcloud --output vip-deployed-environment.yaml custom_vip_data.yaml # openstack overcloud node provision --stack overcloud --overcloud-ssh-key /home/stack/sshkey/id_rsa overcloud-baremetal-deploy.yaml and used the environment files in the openstack overcloud deploy command: (undercloud) [stack@hkg2director ~]$ cat deploy.sh #!/bin/bash THT=/usr/share/openstack-tripleo-heat-templates/ CNF=/home/stack/ openstack overcloud deploy --templates $THT \ -r $CNF/templates/roles_data.yaml \ -n $CNF/workplace/custom_network_data.yaml \ -e ~/containers-prepare-parameter.yaml \ -e $CNF/templates/node-info.yaml \ -e $CNF/templates/scheduler-hints.yaml \ -e $CNF/workplace/networks-deployed-environment.yaml \ -e $CNF/workplace/vip-deployed-environment.yaml \ -e $CNF/workplace/overcloud-baremetal-deployed.yaml \ -e $CNF/workplace/custom-net-bond-with-vlans.yaml Now when i run the ./deploy.sh script i encounter an error stating: ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command.: tripleoclient.exceptions.InvalidConfiguration: Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command. 2022-04-19 13:47:16.582 735924 INFO osc_lib.shell [-] END return value: 1 Can someone tell me where the mistake is? With regards, Swogat Pradhan

4 4

[kolla] [openeuler] CI jobs status
by Michał Nasiadka 26 Nov '24

26 Nov '24

Hello Koalas, OpenEuler jobs in master (to be Antelope) are failing for a long time. If no one is interested in maintaining OpenEuler support in Kolla-Ansible - I will propose dropping it’s support on Wednesday Kolla meeting. Best regards, Michal

4 3

[horizon][ceph] object storage container storage policy missing
by Satish Patel 25 Nov '24

25 Nov '24

Folks, Openstack Release: Zed Recently I have integrated ceph RGW service with openstack/keystone and testing with command line tool "openstack container create foo1" and it works but when I go to Horizon UI I am seeing it doesn't have storage policy dropdown list and because of that I am not able to create container or upload file from Horizon GUI https://ibb.co/KhYW6Rd It works with commands like but not horizon. $ openstack container create foo1 +---------------------------------------+-----------+------------------------------------------------+ | account | container | x-trans-id | +---------------------------------------+-----------+------------------------------------------------+ | AUTH_d4d82849885e4126aef402c408ad2c5c | foo1 | tx00000c057454841b13497-0065b558b4-42ff2eb-ahm | +---------------------------------------+-----------+------------------------------------------------+ $ openstack container list +------+ | Name | +------+ | foo1 | +------+

2 2

[nova][libvirtd] internal error: unable to execute QEMU command 'query-named-block-nodes'
by Satish Patel 22 Oct '24

22 Oct '24

Folks, I have a ceph cluster and recently I configured rbd-mirror to replicate all data to remove ceph cluster for disaster recovery. Yesterday for POC we did a hard cutover on ceph and point openstack to the new cluster. All other vms came back up fine but 2 vms stuck in this error state in libvirt logs 2024-01-31 22:44:37.591+0000: 474597: error : qemuMonitorJSONCheckErrorFull:399 : internal error: unable to execute QEMU command 'query-named-block-nodes': cannot read image start for probe: Permission denied If it's a wider issue than it should impact all the vms but why only two VM stuck and not starting and libvirt giving me this error in logs nova-compute logs also showing same error 2024-01-31 22:44:40.925 7 INFO nova.compute.manager [None req-b33485b5-8740-48ae-8b5b-a440de3f11a4 c48fcfb9347f413f92fcece065644b00 ca5c652478c7429e964257990800e9cb - - default default] [instance: 2de0f880-77c7-4d2c-9e01-898c57ad3693] Successfully reverted task state from powering-on on failure for instance. 2024-01-31 22:44:40.944 7 ERROR oslo_messaging.rpc.server [None req-b33485b5-8740-48ae-8b5b-a440de3f11a4 c48fcfb9347f413f92fcece065644b00 ca5c652478c7429e964257990800e9cb - - default default] Exception during message handling: libvirt.libvirtError: internal error: unable to execute QEMU command 'query-named-block-nodes': cannot read image start for probe: Permission denied

3 8

Kolla Ansible on Ubuntu 20.04 - cloud-init & other network issues
by Tobias McNulty 10 Oct '24

10 Oct '24

Hi, I'm attempting to use Kolla Ansible 14.6.0 to deploy OpenStack Yoga on a small 3-node Ubuntu 20.04 cluster. The nodes have 128 GB RAM each, dual Xeon processors, and dual 10G Intel NICs. The NICs are connected to access ports on a 10G switch with separate VLANs for the local and external networks. All the playbooks run cleanly, but cloud-init is failing in the Ubuntu 20.04 and 22.04 VMs I attempt to boot. The VM images are unmodified from https://cloud-images.ubuntu.com/, and cloud-init works fine if I mount a second volume with user-data. The error is a timeout attempting to reach 169.254.169.254. This occurs both when booting a VM in an internal routed network and directly in an external network. I tried various neutron plugin agents (ovn, linuxbridge, and openvswitch both with and without firewall_driver = openvswitch <https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro…>) first with a clean install of the entire OS each time, all with the same result. Running tcpdump looking for 169.254.169.254 shows nothing. As a possible clue, the virtual NICs are unable to pass any traffic (e.g., to reach an external DHCP server) unless I completely disable port security on the interface (even if the associated security group is wide open). But disabling port security does not fix cloud-init (not to mention I don't really want to disable port security). Are there any additional requirements related to deploying OpenStack with Kolla on Ubuntu 20.04? This is a fairly vanilla configuration using the multinode inventory as a starting point. I tried to follow the Quick Start <https://docs.openstack.org/kolla-ansible/yoga/user/quickstart.html> as closely as possible; the only material difference I see is that I'm using the same 3 nodes for control + compute. I am using MAAS so it's easy to get a clean OS install on all three nodes ahead of each attempt. I plan to try again with the standard (non-HWE) kernel just in case, but otherwise I am running out of ideas. In case of any additional clues, here are my globals.yml and inventory file, along with the playbook I'm using to configure the network, images, VMs, etc., after bootstrapping the cluster: https://gist.github.com/tobiasmcnulty/7dbbdbc67abc08cbb013bf5983852ed6 Thank you in advance for any advice! Cheers, Tobias

5 9

Live migration fails
by Szabo, Istvan (Agoda) 07 Aug '24

07 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[ptl][tc] OpenStack packages PyPi additional external maintainers audit & cleanup
by Ghanshyam Mann 17 May '24

17 May '24

Hi PTLs, As you might know or have seen for your project package on PyPi, OpenStack deliverables on PyPi have additional maintainers, For example, https://pypi.org/project/murano/, https://pypi.org/project/glance/ We should keep only 'openstackci' as a maintainer in PyPi so that releases of OpenStack deliverables can be managed in a single place. Otherwise, we might face the two sets of maintainers' places and packages might get released in PyPi by additional maintainers without the OpenStack project team knowing about it. One such case is in Horizon repo 'xstatic-font-awesome' where a new maintainer is added by an existing additional maintainer and this package was released without the Horizon team knowing about the changes and release. - https://github.com/openstack/xstatic-font-awesome/pull/2 To avoid the 'xstatic-font-awesome' case for other packages, TC discussed it in their weekly meetings[1] and agreed to audit all the OpenStack packages and then clean up the additional maintainers in PyPi (keep only 'openstackci' as maintainers). To help in this task, TC requests project PTL to perform the audit for their project's repo and add comments in the below etherpad. - https://etherpad.opendev.org/p/openstack-pypi-maintainers-cleanup Thanks to knikolla to automate the listing of the OpenStack packages with additional maintainers in PyPi which you can find the result in output.txt at the bottom of this link. I have added the project list of who needs to check their repo in etherpad. - https://gist.github.com/knikolla/7303a65a5ddaa2be553fc6e54619a7a1 Please complete the audit for your project before March 15 so that TC can discuss the next step in vPTG. [1] https://meetings.opendev.org/meetings/tc/2023/tc.2023-01-11-16.00.log.html#… -gmann

18 27

[kolla-ansible] support for FWaaS/LBaaS?
by garcetto 15 May '24

15 May '24

good morning, does kolla support fwaas or lbaas? thank you

3 4

[all][packaging][release][qa] pep-517 and pip 23
by smooney＠redhat.com 07 May '24

07 May '24

hi folks, TL;DR ----- this is a long email so the tl;dr is we should add pyproject.toml ``` [build-system] requires = ["pbr>=5.7.0", "setuptools>=36.6.0", "wheel"] build-backend = "pbr.build" ``` to all openstack projects to supprot pip 23.1+ Long version ------------ As some of you may know the ptg happend last week an done of hte topic raised there was a know limitation in devstack where GLOBAL_VENV=True does not work on centos/fedora derived distros. while i generally dont use centos/fedora derived distros for my daily work i have been using devstack for over 10 years at this point so when im told it broken i ocationlly will go fix it. In this case the issue is not with devstack (it often isnt) and is actully in our collective reliance on a deprecated functionality and how we package openstack today. Back story, for better or worse when openstack was created the landscape of python packaging was significantly different then it is today. To help corodinate our dependcies the openstack comunity went all in on requirements.txt and developed upper-constraits to manage our requirements and developed PBR (python build Reasonableness). both of those approches have served us well and likely will continue to do so for some time. Since then pyproject.toml has started to gain popularity and pep-517 (A build-system independent format for source trees) has been adotpted but so far openstack as a comunity has not embraced those changes. (although pbr already supprot pep-517 :) ). Until now this has not been a problem however with recent release of pip things are now breaking. Problem Context: - openstack does not provide pyporject.toml files - openstack project configure setuptools to use pbr via setup.py - setuptools support generating scripts form entry points(console_scripts) which we use for project binaries( nova- compute, neutron-server, ...) - openstack api services use a pbr extension know as wsgi_scripts which adds a similar functionality for generating wsgi application mains file - devstack due to coming changes in distro to block "sudo pip install" now installs openstack in a single by default on debian distros. on centos/fedora distros it currently almost functional (but not). - devstack installs in editable mode because that is how most developers use devstack for developemnt What changed: - pip 20.2 deprecated support for falling back to calling setup.py when pyproject.toml is not present - https://pip.pypa.io/en/stable/news/#v20-2 - https://github.com/pypa/pip/issues/8368 - at this point when pyproject.yaml is not called pip calls setup.py install [-e] <path to repo or package name> - setup.py invokes pbr to generate wsgi_scripts and other files - in pip 23.1 the fallback was removed https://pip.pypa.io/en/stable/news/#v23-1 - pip now builds a temp local wheel instead of calling setup.py install when pyproject.toml is not found - in editable mode (-e) the default way the wheel is built does not invoke pbr properly to generate the wsgi files - as a result the wsgi files are not installed to the venv bin dir and this causes devstack to fail to start keystone (or any other wsgi api) The fix, there are a few ways to approch this: - clamp pip (https://review.opendev.org/c/openstack/devstack/+/898845) this is a terible idea and it breaks debian - clamping pip below 23.1 works on centos for now however OVS on debian already requires pep 517 for installing - as such when that version of ovs (or other projects start enforcing that) hits centos it will break - add a minimal pyproject.toml to all openstack project - example for keystone https://review.opendev.org/c/openstack/keystone/+/899519 - this example jsut adds the minium pyproject.toml to enable pbr to be used as the build system - it does not remove supprot for setup.py but it will not be used by default going forward whit new version of pip - all config is still in setup.cfg - add pyproject.toml support but remove setup.py support https://review.opendev.org/c/opendev/bindep/+/816741 - this goes one step futrue and actuly nulls out setup.py - we could take this approach if we want to but its not required. The reason for this email is to get agreement on how to support pip 23.1+ My proposal would be to add pyproject.toml with the minimal config required to enable pip 23.2 but not drop the setup.py support in this cycle. i would suggest that we can deprecate installing via setup.py in caracal if that is desirable but not make that change until the next slurp to give time to projects and packages to catch up. if there are no objections to that i would like to ask what is the preferd way to create and submit the patches for the minimal pyproject.toml ``` [build-system] requires = ["pbr>=5.7.0", "setuptools>=36.6.0", "wheel"] build-backend = "pbr.build" ``` i can propose patches to the main project deployed by devstack by default. i.e. nova/neutron ectra but it might be better if someone form the core teams of each project could take on that task and chasing the reviews. if someone has a script to generate a patch for a set of repos that just add the above pyporject.toml then we can use that to keep a consistent topic/commit message across all patches. my proposal for testing this is two fold. in ci we can test the patches are functional by using a DNM patch to devstack to force enable the gloal venv on centos and depend on the set of patches, i will modify https://review.opendev.org/c/openstack/devstack/+/898845 to do that locally we can test that the patch is functional by doing the following substituting keystone for the relevant project. ``` git clone https://opendev.org/openstack/keystone cd keystone python3 -m venv .venv . .venv/bin/activate python3 -m pip install -U pip python3 -m pip install -e . ls .venv/bin/keystone* ``` the ls will not contain the wsgi script with the addition of the pyproject.toml it should. on debian sid i can reproduce the same issue the problem we are seeing on centos 9 now will start impacting other distos eventually so its good to fix this now. if i start proposing this to glance/nova/neutron/cinder/swift/horizon/placement (to get a default devstack working) can i get cores to review? can cores form each project nominate peopel to review or volenteer to do this work. i have created https://etherpad.opendev.org/p/pep-517-and-pip-23 to track this work i have some other work that i think we can do in parallel like addign pyporject.toml support to the pti requirements if we go this way but that i think we can discuss on a governacne patch to updated it. anyway this is a lot to digest so feedback is welcome. if someone else would like to drive this that is also welcome (i.e. tc/release team) regards sean.

10 27

Accessing virsh in openstack wallaby | tripleo
by Swogat Pradhan 24 Mar '24

24 Mar '24

Hi, Can someone please tell me how can i access the virsh utility on the compute node on openstack wallaby? Previously we used nova_libvirt but in wallaby there are multiple containers and i am unable to use virsh utility to edit my domain.xml file. List of containers: [root@dcn01-hci-2 ~]# podman ps | grep nova 10d981158842 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtlogd_wrapper e91667516afc 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtsecretd a4b07fe0e833 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtnodedevd d7e1db393e9c 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtstoraged 5308a171793e 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtqemud f490a6249ba1 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 6 weeks ago nova_virtproxyd ab0441e56957 172.25.201.68:8787/tripleomaster/openstack-nova-compute:current-tripleo kolla_start 2 months ago Up 2 months ago (healthy) nova_migration_target f35fbba5b690 172.25.201.68:8787/tripleomaster/openstack-nova-compute:current-tripleo kolla_start 2 months ago Up 6 weeks ago (unhealthy) nova_compute 82bc01993106 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo /usr/sbin/virtlog... 2 months ago Up 2 months ago Can someone please suggest how I can i edit an instance xml file in this setup? With regards, Swogat Pradhan

2 5

[Freezer] Is Freezer dead?
by pi3.14＠tuta.io 19 Mar '24

19 Mar '24

Hi folks, is Freezer still supported? I don't see any real development going on with it. Is it recommended to use in a production Cloud environment? Are there other free and open source alternatives to Freezer? Thanks Roby

8 19

[swift] Increase part power on account/container ring
by Thiago De Moraes Teixeira 13 Mar '24

13 Mar '24

Morning, Here we have a cluster with Accounts/Containers ring with part power 8 and our Objects ring with part power 20 (builted later). Now we want to migrate the 'old' Accounts/Containers ring to a new one, with higher part power, like 20. Is there a better way to do this? I'm doing some crazy tests with SAIO and multiples storage nodes, based in build a new ring with part power 20 and just swap the old files (account/container.ring.gz) with the new ones and let the replicators do their jobs, moving *.db files to their new home partition. Until today these tests worked fine, but I don't know how to do it on a large scale, with some terabytes of data. Just wondering about some ways to do that :) And before/after this change, is there any command in swift that i can audit this entire process, ensuring that cluster data remains the same? Thanks! -- _‘Esta mensagem é direcionada apenas para os endereços constantes no cabeçalho inicial. Se você não está listado nos endereços constantes no cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas estão imediatamente anuladas e proibidas’._ * **‘Apesar do Magazine Luiza tomar todas as precauções razoáveis para assegurar que nenhum vírus esteja presente nesse e-mail, a empresa não poderá aceitar a responsabilidade por quaisquer perdas ou danos causados por esse e-mail ou por seus anexos’.*

3 8

[heat][monasca][sahara][senlin] Features dependent on inactive projects
by Takashi Kajinami 09 Mar '24

09 Mar '24

Hello, As you know, some of the OpenStack projects were marked inactive during this cycle. There are still on-going discussions but from my view these are very likely excluded from the upcoming 2024.1 release and it's unclear yet if any of these projects will be kept. Currently heat provides features integrated with some of the inactive projects (Monasca, Sahara and Senlin), and we have to decide how we deal with these features[1]. The main concern is that we can't maintain the features for the inactive projects, and IMO we should retire these features if these inactive projects are abandoned or are no longer maintained in the consistent way with the other active projects. Based on the current situation, I'd propose the following steps for upcoming cycles. - Deprecate the features dependent on inactive projects in 2023.2 release - Note that we have to remove these features directly during this cycle in case any problems related to these project block the upcoming heat release. - Remove these features in 2024.1 release unless we are sure that these projects are kept maintained as active projects in the openstack namespace, with following the global release cycle. Please let me know if you have any concern about the proposed plan. If I hear no objections then I'll propose patches for deprecation. Thank you, Takashi Kajinami irc: tkajinam [1] I've submitted a series of patches to remove these features and these would give a clear view about the features affected. https://review.opendev.org/q/topic:%22inactive-project-removal%22+project:o…

3 6

[cinder][glance][nova][telemetry][monasca][oslo][vmware] Can we deprecate(and remove) VMWare support ?
by Takashi Kajinami 07 Mar '24

07 Mar '24

Hi all, As you might know, some of the OpenStack projects currently support usage of VMWare component. However recently the VMware virt driver in nova was marked experimental in 2023.2 release [1] and it has been discussed that the driver will be removed in 2023.2 release[2], after deprecation is backported to 2023.1. (Please someone from nova team correct me if I'm wrong) So my current question is; Does it make sense to deprecate all of the features to support VMWare component ? My understanding is that these features were added to be used along with VMWare virt driver in nova, but once the virt driver is removed this use case is voided. I'll list up the features within the discussion scope below. nova: VMWare virt driver (this is already experimental by [1]) cinder: VMware Storage Driver (vmdk) glance: VMWare Datastore (I proposed deprecating this in [3][4]) ceilometer: VMWare virt driver (this was deprecated by [5]) os-brick: VmdkConnector monasca-agent: vcenter collector (*1) oslo.vmware: the whole project NOTE: These features are found based on dependency on oslo.vmware but there can be a few not listed here. Outside of OpenStack's governance, there are two projects dependent on oslo.vmware, networking-vsphere and vmware-nsx but both of these look inactive. Because of SLURP, we have to complete deprecation during in 2024.1 release so that we can drop the feature right after 2024.1. If we fail then we have to maintain these features until 2025.1 (the features already deprecated can be removed earlier, though). So I'd like to get feedback and decision before deadline for 2024.1 Thank you, Takashi (*1) Monasca is now inactive so I doubt anyone would work on this topic before it is retired. [1] https://review.opendev.org/c/openstack/nova/+/863911 [2] https://review.opendev.org/c/openstack/nova/+/897017 [3] https://review.opendev.org/c/openstack/glance_store/+/893696 [4] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack… [5] https://review.opendev.org/c/openstack/ceilometer/+/894540

6 21

[Watcher] How use Watcher to scheduler Openstack resource without cpu_usage
by Nguyễn Hữu Khôi 06 Mar '24

06 Mar '24

Hello guys. I want to use watcher to scheduler openstack resources but some openstack versions are missing cpu_usage metric. How do we use Watcher without it? Thank you. Nguyen Huu Khoi

3 5

[openstack][skyline] Some works with skyline
by Nguyễn Hữu Khôi 26 Feb '24

26 Feb '24

Hello guys. I am working on Skyline. I can integrate my monitor tab on it. I will try to do something about it. If it works properly, I can contribute. It is a very nice project. I hope it will grow and grow in the future. Thanks Skyline Team. [image: image.png] Nguyen Huu Khoi

3 7

[tc][murano] Status of the murano project
by Takashi Kajinami 21 Feb '24

21 Feb '24

Hello, As I brought in another thread about yaql library maintenance[1], It seems murano project is not active now, based on the following points. * The changes merged during recent two years but all of these are gate fix * Its CI is currently broken and no one is trying to fix it * I tried reaching the current PTL by email or gerrit review but didn't get any feedback even after waiting for a few weeks I'm wondering if murano project should be added to the inactive projects, or at least its project health and plan needs to be reviewed by TC, before we include this to Caracal deliverables. # Though it might be too later to drop the deliverables now Thank you Takashi Kajinami irc: tkajinam [1] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack…

4 15

Encountering a live migration issue on Kolla Ansible Deployment
by khurshidsx＠gmail.com 15 Feb '24

15 Feb '24

Hello all, I recently set up a cluster using Kolla Ansible, but I'm encountering a live migration issue. I would appreciate any advice or insights you can provide. Error Message is rule:create_port_binding is disallowed by policy Neutron server returns request_ids: ['req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee'] Here are some logs: 2024-01-25 04:55:51.599 23 INFO neutron.api.v2.resource [req-a380e1bc-a94b-4935-be0d-76fcc94becc4 req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee 636854b888d7441eafcd21255e1378f1 b07c4b6d7b2241c187ed84f30b163817 - - default default] create failed (client error): Access was denied to this resource. 2024-01-25 04:55:51.601 23 INFO neutron.wsgi [req-a380e1bc-a94b-4935-be0d-76fcc94becc4 req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee 636854b888d7441eafcd21255e1378f1 b07c4b6d7b2241c187ed84f30b163817 - - default default] 192.168.252.254,192.168.252.12 "POST /v2.0/ports/e70fab29-d0cd-4db4-8fbc-a572da1bff64/bindings HTTP/1.1" status: 403 len: 308 time: 0.0207033 Neutron server returns request_ids: ['req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee'] 2024-01-25 04:55:51.815 19 ERROR nova.conductor.manager Neutron server returns request_ids: ['req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee'] 2024-01-25 04:55:51.815 19 ERROR nova.conductor.manager Neutron server returns request_ids: ['req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee'] Neutron server returns request_ids: ['req-dce2d22c-349b-4759-a0f2-8bebbfbb1aee']: nova.exception.Forbidden: rule:create_port_binding is disallowed by policy

3 5

[neutron][vpnaas][ovn] Pushing VPNaaS support through OVN
by Mohammed Naser 13 Feb '24

13 Feb '24

Hi all! One of the biggest show stoppers for us for OVN is VPNaaS but I think it’s time that we’d like to be involved in getting it over the line, I want to thank Bodo who has shown a lot of patience in getting the code necessary, and it seems that the code works for them in production as well. I’d like to ask if possible for folks to review these two outstanding changes: https://review.opendev.org/c/openstack/neutron-tempest-plugin/+/847007 https://review.opendev.org/c/openstack/neutron-vpnaas/+/765353 I know Slawek had some concerns, so hoping that raising via the email list if Bodo can address those and over the next bit of time we can get this landed in, since it even has actual proper testing both in CI and with user feedback. Thanks! Mohammed

6 8

about magnum capi for production
by Nguyễn Hữu Khôi 08 Feb '24

08 Feb '24

Hello guys. Could you share with me some experience about using Magnum CAPI in production? https://github.com/vexxhost/magnum-cluster-api Thank you so much. Nguyen Huu Khoi

6 44

Glance image import to AWS S3 fails for files larger than 5GB
by Shrishail K 06 Feb '24

06 Feb '24

Hi Team, I have a use case where I need to replicate images from file store to S3 store. While image creation directly on S3 works fine with large files over 5G. The same fails when attempted via image-import with copy-image method. The failure is due to AWS rejecting a single object upload operation where the object size is over 5GB. What I see from logs is that direct image creation on S3 uses multipart upload when images are large. However, I fail to see the same happening when image import was used to copy an image from file to s3. Is this a known issue? Or Am I missing some configs related to image-import? Openstack version: Antelope Client version: 6.4.0 Thanks, Shrishail

3 14

[puppet] Retiring puppet-qdr
by Takashi Kajinami 06 Feb '24

06 Feb '24

Hello, Let me restore my old proposal[1] about puppet-qdr. # I lost access to my old emails so I'm starting a new thread. In the previous mail I proposed deprecation instead of retirement, because the module has been used by TripleO. However I noticed that TripleO is now under the process of complete retirement[2]. So, I'd like to revise my proposal, and propose retiring the module completely. Please let me know if you have any concern with this module retired. Unless I hear any objections, I'll start the official retirement process. [1] https://lists.openstack.org/pipermail/openstack-discuss/2023-August/034742.… [2] https://review.opendev.org/c/openstack/governance/+/905145 Thank you, Takashi Kajinami irc: tkajinam

2 2

[fwaas][devstack] help configuring dashboard
by garcetto 05 Feb '24

05 Feb '24

good morning, is there some tutorial on how to configure fwaas web dashboard on devstack? thank you.

2 1

[nova] Help with support to SGX
by Winicius Allan 05 Feb '24

05 Feb '24

Hello o/ Anyone already work with Nova to provide VMs with SGX support?

6 7

[all] SQLAlchemy 2.x support in Bobcat
by Thomas Goirand 02 Feb '24

02 Feb '24

Hi, As you may know, and to my great frustration, I'm not the maintainer of SQLAlchemy in Debian, even though OpenStack is the biggest consumer of it. The current maintainer insists that he wants to upload SQLA 2.x in Unstable, potentially breaking all of OpenStack. At the present moment, if I understand correctly, we're not there yet, and Bobcat doesn't have such a support. It would be ok for me, *IF* there are patches available on master, that I could backport to Bobcat and maintain in the debian/patches folder of each project. However, the biggest current annoyance, is that I have no idea where we are at. Are we close to such a support? Is there a list of patches to apply on top of Bobcat that is maintained somewhere? Please enlighten me... :) Cheers, Thomas Goirand (zigo)

5 10

RE: [cinder] Inactive 3rd party CIs
by Roquesalane, Jean-Pierre 02 Feb '24

02 Feb '24

Thanks Takashi for driving this. As far as Dell is concerned, those CIs should be marked as unsupported as they are now EOL. * DellEMC SC CI * DellEMC VNX CI * DellEMC XtremIO CI I'll have the CI team to take a look at the Dell PowerMax CI which is supposed to be active. JP Jean-Pierre Roquesalane SW System Sr Principal Engineer - OpenStack Champion Dell Technologies | Security and Ecosystem Software Mobile +33 6 21 86 79 04<tel:1-613-314-8106> Email : jeanpierre.roquesalane(a)dell.com<mailto:jeanpierre.roquesalane@dell.com> [cid:image001.png@01DA545A.5A50B740] Dell SAS, Si?ge Social 1 rond point Benjamin Franklin 34000 Montpellier. Capital 1,946,545.26 Euros, 351 528 229 RCS Montpellier -APE 4651Z -TVA Intracommunautaire FR 20 351 528 229. SIRET 351 528 229 00088 Vat Number : FR 20351528229 (France) / IT00001709997 (Italy) / ESN0012622G (Spain) Internal Use - Confidential

3 7

Re: [kolla-ansible][magnum] question
by Oliver Weinmann 02 Feb '24

02 Feb '24

Hi Franck, glad that I was able to help. Sorry I don't know about this one. But a quick google revealed this: https://docs.fedoraproject.org/en-US/fedora-coreos/sysconfig-configure-swap… Looks as if the FCOS image has this enabled somehow. I have updated my blogpost on CAPI in MAGNUM. It is finally working and its way faster to deploy Kubernetes. This will no longer use FCOS images but Ubuntu or FLATCAR. Maybe you want to give it a try: https://www.roksblog.de/openstack-magnum-cluster-api-driver/ Have a nice weekend. Cheers, Oliver Am 05.01.2024 um 17:07 schrieb Franck VEDEL: > Hi Oliver. > Thanks for you help !! > > I took the time to consult the help concerning > Magnum(https://docs.openstack.org/magnum/2023.1/user/) and this > article > (https://www.roksblog.de/deploy-kubernetes-clusters-in-openstack-within-minu…) > > > > I understood a lot of things, even though I'm not a Kubernetes expert. > Everything works as I wanted, except for one detail. > Do you know why we get this type of message (and quite a few minutes > to wait) when creating a node: > Capture d’écran 2024-01-05 à 15.43.04.png > > zram_generator…………. no configuration found. > > This is the last point that I cannot improve. Maybe there's nothing we > can do. > Thank you once again, that’s really very nice. > > > Franck VEDEL > > > > >> Le 3 janv. 2024 à 12:26, Oliver Weinmann <oliver.weinmann(a)me.com> a >> écrit : >> >> Hi Franck, >> >> Great. Glad it works. That is the k8s version and the url where >> magnum will pull the container from. The official docs are quite >> helpful. In the latest Openstack release bobcat there is already some >> support for CAPI. It is not 100% working out of the Box but it looks >> very promising. I have taken my blog post offline since I didn’t >> manage to get it working. But I will look into it again in the next >> couple of days. >> >> Cheers, >> Oliver >> >> Von meinem iPhone gesendet >> >>> Am 03.01.2024 um 12:21 schrieb Franck VEDEL >>> <franck.vedel(a)univ-grenoble-alpes.fr>: >>> >>> Hi Oliver, >>> and thanks a lot for your help. >>> I followed the instructions on the blog and indeed, with [trust] it >>> works. >>> I'm trying to understand everything. what are the parameters for: >>> >>> |--labels kube_tag=v1.21.11-rancher1,hyperkube_prefix=docker.io/rancher/| >>> >>> Thanks in advance >>> >>> Franck >>> >>> >>> >>>> Le 25 déc. 2023 à 19:26, Franck VEDEL >>>> <franck.vedel(a)univ-grenoble-alpes.fr> a écrit : >>>> >>>> Hi Oliver and thanks you for this help. >>>> >>>> I was wrong in my explications. >>>> I had seen this article (roksblog.de ) and I did what it said: >>>> I first tried: >>>> enable_cluster_user_trust = True in globals.yml >>>> It didn't work. >>>> >>>> I then made the modification in /etc/kolla/config/magnum.conf: >>>> cluster_user_trust = True >>>> >>>> Same problem. >>>> >>>> That's why I asked the question. Is this really the way to do it? >>>> If so, I will have to restart the containers (keystone?) >>>> >>>> Franck >>>> >>>> >>>> >>>>> Le 25 déc. 2023 à 18:40, Oliver Weinmann <oliver.weinmann(a)me.com> >>>>> a écrit : >>>>> >>>>> Hi Frank, >>>>> >>>>> According to the official kolla docs the option needs to be in >>>>> globals.yml >>>>> >>>>> Ensure that you understand the consequences before enabling this >>>>> option. In|globals.yml|: >>>>> >>>>> In case this also doesn’t work, you can try: >>>>> >>>>> yoga) [vagrant@seed ~]$ cat /etc/kolla/config/magnum.conf >>>>> [trust] >>>>> cluster_user_trust = True >>>>> >>>>> *www.roksblog.de >>>>> >>>>> Cheers, >>>>> Oliver >>>>> >>>>> Von meinem iPhone gesendet >>>>> >>>>>> Am 25.12.2023 um 18:10 schrieb Franck VEDEL >>>>>> <franck.vedel(a)univ-grenoble-alpes.fr>: >>>>>> >>>>>> enable_cluster_user_trust = True >>>> >>> >

2 2

Keystone LDAP backend: need to change user_id_attribute from CN to SAMAccountName
by Michel Jouvin 02 Feb '24

02 Feb '24

Hi, For historical (and bad) resons, we decided 10 years ago when we created our cloud that the Keystone LDAP backend will use the CN as the user_id_attribute rather than the usual SAMAccountName. Since then it has been a source of various problems with CN changes, accented characters in CN... We'd like to change it to SAMAccountName but there is clearly no easy/supported way of doing it and we are looking for some information on the best way to do it and the risks if somebody has some clues... It should impact ~30 users so not a huge number... What we have in mind is basically: - Change the backend attribute - Import new accounts - Assign the new accounts to the same projects as the ol accounts, with the same role One of the foreseen problemsis that old and new accounts will share the same user_name_attribute, based on SAMAccountName. It is not allowed by openstack if I'm right so for the scenario to work we need to change the user_name_attribute of old accounts to something different (we don't care that the user cannot use the account during the transition peroid as long as it doesn't impact active resources). Is it enough to update it in the database? We'd prefer to keep the old accounts in OpenStack until the end of the transition... Another minor issue is the reassignment of keypairs to the new account. It is poosble to ask the user to reload its public keys but we were wondering it there was a not too risky way of doing it for him/her by updating the DB (I guess there is no API for this). Thanks in advance if you have any thought/information to share. Best regards. Michel

3 5

sqlite vs NULL
by Pete Zaitcev 01 Feb '24

01 Feb '24

Greetings: In short: Should it be possible to select by key that is NULL in our DBs? This is needed for Cinder, review 657543[1]. Tests run on sqlite. Long explanation: The review tinkers with SQL Alchemy's query, so it may be doing it wrong. However, I looked at the queries and this seems to happen. A query for everything finds the NULL entry. The query looks like this: SELECT backups.created_at AS backups_created_at, (... very many AS ...) FROM backups LEFT OUTER JOIN backup_metadata AS backup_metadata_1 ON backup_metadata_1.backup_id = backups.id AND backup_metadata_1.deleted = false WHERE backups.deleted = false AND backups.host = %(host_1)s So, the entry is in the database. However, this one returns everything that matches the arguments, but not the one with key of NULL: SELECT backups.created_at AS backups_created_at, (... very many AS ...) FROM backups LEFT OUTER JOIN backup_metadata AS backup_metadata_1 ON backup_metadata_1.backup_id = backups.id AND backup_metadata_1.deleted = false WHERE backups.deleted = false AND backups.status IN (%(status_1)s, %(status_2)s, %(status_3)s, %(status_4)s, %(status_5)s, %(status_6)s, NULL) AND backups.host = %(host_1)s ORDER BY backups.created_at DESC, backups.id DESC The backup with a NULL status is in the DB, but I cannot get it with objects.BackupList.get_all(ctxt, filters={'status': (None,)}) One other thing: Is there an easy way to make negative query through SQLalchemy? My real task is to find all the backups that are not stable (complete and error), so that I can restart it. Thanks for any suggestions, -- Pete [1] https://review.opendev.org/c/openstack/cinder/+/657543

3 3

Cinder Bug Report 2024-01-31
by Jon Bernard 01 Feb '24

01 Feb '24

Hello Argonauts, Apologies for the hiatus. Between holidays, snow days, and sick days, January has been quite a month. Here are current bugs for this week, we will resume the bug meetings after the weekly upstream meeting next week. Cinder Bug Meeting Etherpad <https://etherpad.opendev.org/p/cinder-bug-squad-meeting> Undecided - Support for the "bring your own keys" approach for Cinder <https://bugs.launchpad.net/cinder/+bug/2051108> - Status: New - Documentation of Ceph auth caps for RBD clients used by Cinder / Glance / Nova is missing or inconsistent <https://bugs.launchpad.net/cinder/+bug/2051244> - Status: New - Dell PowerMax driver issues restapi version 92 for Unisphere 10.1 <https://bugs.launchpad.net/cinder/+bug/2051828> - Status: In Progress - Dell PowerMax: Add timeout when PowerMax does not return RESTAPI call <https://bugs.launchpad.net/cinder/+bug/2051830> - Status: In Progress - Fibre channel not scanning all targets <https://bugs.launchpad.net/os-brick/+bug/2051237> - Status: In Progress Thanks, -- Jon

1 0

What are the correct auth caps for Ceph RBD clients of Cinder / Glance / Nova
by Christian Rohmann 31 Jan '24

31 Jan '24

Hey openstack-discuss, I am a little confused about correct and required Ceph authx permissions for the RBD clients in Cinder, Glance and also Nova: When Glance is requested to delete an image it will check if this image has depended children, see https://opendev.org/openstack/glance_store/src/commit/6f5011d1f05c99894fb8b…. The children of Glance images usually are (Cinder) volumes, which therefore live in a different RBD pool "volumes". But if such children do exist a 500 error is thrown by Glance API. There also is an bug about this issue on Launchpad [3]. Manually using the RBD client shows the same error: > # rbd -n client.glance -k /etc/ceph/ceph.client.glance.keyring -p > images children $IMAGE_ID > > 2023-12-13T16:51:48.131+0000 7f198cf4e640 -1 > librbd::image::OpenRequest: failed to retrieve name: (1) Operation not > permitted > 2023-12-13T16:51:48.131+0000 7f198d74f640 -1 librbd::ImageState: > 0x5639fdd5af60 failed to open image: (1) Operation not permitted > rbd: listing children failed: (1) Operation not permitted > 2023-12-13T16:51:48.131+0000 7f1990c474c0 -1 librbd::api::Image: > list_descendants: failed to open descendant b7078ed7ace50d from pool > instances:(1) Operation not permitted So it's a permission error. Following either the documentation of Glance [1] or Ceph [2] on configuring the ceph auth caps there is no mention of granting anything towards the volume pool to Glance. So this is what I currently have configured: > client.cinder > key: REACTED > caps: [mgr] profile rbd pool=volumes, profile rbd-read-only > pool=images > caps: [mon] profile rbd > caps: [osd] profile rbd pool=volumes, profile rbd-read-only > pool=images > > client.glance > key: REACTED > caps: [mgr] profile rbd pool=images > caps: [mon] profile rbd > caps: [osd] profile rbd pool=images > > client.nova > key: REACTED > caps: [mgr] profile rbd pool=instances, profile rbd pool=images > caps: [mon] profile rbd > caps: [osd] profile rbd pool=instances, profile rbd pool=images > When granting the glance client e.g. "rbd-read-only" to the volumes pool via: > > # ceph auth caps client.glance mon 'profile rbd' osd 'profile rbd > pool=images, profile rbd-read-only pool=volumes' mgr 'profile rbd > pool=images, profile rbd-read-only pool=volumes' > the error is gone. I am wondering through if this is really just a documentation bug (at OpenStack AND Ceph equally) and if Glance really needs read-only on the whole volumes pool or if there is some other capability that covers asking for child images. All in all I am simply wondering what the correct and least-privilege ceph auth caps for the RBD clients in Cinder, Glance and Nova would look like. Thanks Christian [1] https://docs.openstack.org/glance/latest/configuration/configuring.html#con… [2] https://docs.ceph.com/en/latest/rbd/rbd-openstack/#setup-ceph-client-authen… [3] https://bugs.launchpad.net/glance/+bug/2045158

6 15

[cinder] This week's meeting will be in video+IRC
by Rajat Dhasmana 31 Jan '24

31 Jan '24

Hello Argonauts, As we keep last meeting of the month in video + IRC mode, this week's meeting (today) will be held in video + IRC mode with details as follows: Date: 31st January, 2024 Time: 1400 UTC Meeting link: https://meet.google.com/mmb-fhtd-sjm IRC Channel: #openstack-meeting-alt Make sure you're connected to both the gmeet meeting and IRC. Thanks Rajat Dhasmana

1 0

[all][oslo][ironic][tc] Eventlet version bumps (topic:bump-eventlet in gerrit)
by Jay Faulkner 31 Jan '24

31 Jan '24

Hi all, https://review.opendev.org/q/topic:%22bump-eventlet%22 was pushed recently, to bump eventlet versions to a consistent lower bound across OpenStack projects. I saw some concerns about this across various OpenStack IRC channels, and wanted to start a larger conversation around the changes rather than having what would be my third separate small conversation about it :). I cannot speak to exactly why Herve pushed these changes, but I think they are a good idea and should be merged. If you're unaware or haven't read up on the context; versions of eventlet before 0.34 were released with minimal/failing CI, and done so with known bugs in many cases. A group of developers has taken the last months to improve the state of eventlet considerably, enhancing and improving CI, discovering and fixing known issues and enabling support for Python 3.12. From my perspective; this is a significant enough improvement to warrant our community moving forward generally[0] with setting a new higher low bound for eventlet -- the versions that are maintained. I do think that we can do a better job of advertising the value of this change in gerrit to other OpenStack contributors; simply stating it's for python 3.12 support downplays the significant improvements made across that project and the overall value of landing the version bump. I am unsure if we should advertise the improvements in a user/operator facing manner; I lean towards not doing so. From a single project perspective (with my Ironic PTL hat on): I have no desire to troubleshoot bugs in Ironic, or related projects, that only occur in eventlet versions prior to 0.34. This leads me to believe landing those changes in Ironic are the good path forward, and I'll be advocating for that inside Ironic. Thanks, Jay Faulkner OpenStack TC Chair OpenStack Ironic PTL 0: I'll note this should not be read as a suggestion of a mandate; only that it's a good idea to bump this requirement in OpenStack projects and should be done unless cores for that project see a specific reason why not.

2 6

[cinder] qos don t keep modifications
by garcetto 31 Jan '24

31 Jan '24

good evening, i was trying qos on cinder volumes, and it is working fine, BUT i found that if i modify the qos limits, or update or even remove them the actual vols that already have the previous iops limits do NOT thake new values...the newly created vols yes, the old ones not...is it a bug or is it normal? here i create a 100 iops limit, set on volumes type, THEN modify it, even reboot istance, BUT old value persisist... [image: image.png] thank you.

3 3

Openstack-Ansible External Networking OVN (Br-ex)
by jjjamesg 31 Jan '24

31 Jan '24

I can't for the life of me get external connectivity working, openstack itself works i just cant get external connectivity working, I can see ovs has created br-ex with bond1 attached. ovs-vsctl get open . external_ids:ovn-bridge-mapping shows: "physnst1:br-ex" I have tried creating the network with both: openstack network create --share --external --provider-physical-network physnet1 --provider-network-type vlan --provider-segment 233 public openstack network create --share --external --provider-physical-network physnet1 --provider-network-type flat publicnet-flat Only errors i can see is in the neutron container when i try and either create an instance on said network or attach a fip is is: (similar errors from a vlan type network this is just the error i pulled at the time) ERROR neutron.plugins.ml2.managers [req-de7f1cb8-ac8e-4dd6-ad2a-e14afdb152b5 req-c6a2aaff-ccf9-4ef3-9ef 7-1a8e4c7a1e41 9c27de6bdc4449abbbbcd5e5c4951bb9 2fced1ff77f5428eb2b63879bdd608cc - - default default] Failed to bind port 03cc1708-d4a2-4b11-bca2-40ebe0acff60 on host 02 for vnic_type normal using segments [{'id': '2ef64682-b5ff-472b-935d-a3c2b615d70f', 'network_type': 'flat', 'physical_network': 'physnet1', 'segmentation_id': None, 'network_id': '52b4f4e9-47f3-431b-8c45-ec8cc17f561d'}] WARNING neutron.scheduler.dhcp_agent_scheduler [None req-aafa81d9-479c-4f56-be6f-54d4ab3b42aa 1b29a 2297a224cdcaaba84e0eac30205 bafabcf2414d4adf98cab165c3f3de12 - - default default] No more DHCP agents WARNING neutron.api.rpc.agentnotifiers.dhcp_rpc_agent_api [None req-aafa81d9-479c-4f56-be6f-54d4ab3b42aa 1b29a2297a224cdcaaba84e0eac30205 bafabcf2414d4adf98cab165c3f3de12 - - default default] Unable to schedule network 5fa049f5-0ed4-4287-9c63-dd753c853c35: no agents available; will retry on subsequent port and subnet creation events. I just cant figure out WHY this isn't working.. Below is my config: ############# ### /etc/network/interfaces: ############# auto bond1 iface bond1 inet manual bond-slaves eno2 eno4 bond-mode 802.3ad bond-miimon 100 bond-downdelay 200 bond-updelay 200 bond-lacp-rate 1 mtu 9000 auto bond1.30 iface bond1.30 inet manual vlan-raw-device bond1 ## (br-pubv is for my public vip) auto bond1.232 iface bond1.232 inet manual vlan-raw-device bond1 auto br-overlay iface br-overlay inet static bridge_stp off bridge_waitport 0 bridge_fd 0 bridge_ports bond1.30 address auto br-pubv iface br-pubv inet static address gateway bridge_stp off bridge_waitport 0 bridge_fd 0 bridge_ports bond1.232 ############# ### openstack_user_config.yml: ############# - network: container_bridge: "br-ex" network_interface: "bond1" type: "vlan" range: "232:332" net_name: "physnet1" group_binds: - neutron_ovn_controller ############# ### user_variables.yml ############# neutron_plugin_type: ml2.ovn neutron_plugin_base: - ovn-router - qos - neutron.services.ovn_l3.plugin.OVNL3RouterPlugin - neutron_dynamic_routing.services.bgp.bgp_plugin.BgpPlugin - vpnaas - metering - firewall_v2 neutron_ml2_drivers_type: "vlan,local,geneve,flat" neutron_provider_networks: network_types: "geneve" network_geneve_ranges: "1:1000" network_vlan_ranges: "physnet1" network_mappings: "physnet1:br-ex" network_interface_mappings: "br-ex:bond1" Bond1 is a trunk port (no native vlan), that has access to both overlay vlan and the 232:332 vlan range which both work when setting either network as a bridge on bond1 so connectivity is there. I have network-northd/gateway_hosts defined as well as: neutron_neutron_conf_overrides: ovn: enable_distributed_floating_ip: True openstack_host_specific_kernel_modules: - name: "openvswitch" pattern: "CONFIG_OPENVSWITCH" This should by all accounts just work, but for some reason for me it's not, what steps have i missed?

4 8

Incorrectly implemented service tokens in kolla-ansible
by Franciszek Przewoźny 31 Jan '24

31 Jan '24

Hi all, Can someone from kolla-ansible development have a look into that: https://bugs.launchpad.net/kolla-ansible/+bug/2049762 ? As for now, the provided configuration is totally different to what's described in manual. Thanks! Franciszek Przewoźny

2 2

[masakari][masakari-monitors] Feature to monitor hosts by kubernetes
by dogyun kim 31 Jan '24

31 Jan '24

Hi team masakari! I'm using openstack on kubernetes and also masakari for HA. I have developed a function monitoring by using kubernetes api internally to masakari-monitors for k8s-native openstack and want to contribute. blueprint link : https://blueprints.launchpad.net/masakari/+spec/host-monitors-by-kubernetes

5 5

[cinder] Inactive 3rd party CIs
by Takashi Kajinami 31 Jan '24

31 Jan '24

Hi, While I was trying to get a fresh restult from DellEMC VNX CI in [1], I noticed that some of the 3rd part CIs are inactive and haven't been posted any results for a long period. # See [2] and the list below. Note that the list may contain CIs for retired drivers. I'm wondering if someone from the cinder team can review the status and reach the vendors maintaining these CIs. If any of these are no longer working and there is no plan to recover these then I believe we have to mark the associated volume drivers unsupported and then remove these in a future release. Thank you, Takashi irc: tkajinam [1] https://review.opendev.org/c/openstack/cinder/+/834805 [2] http://cinderstats.ivehearditbothways.com/cireport.txt $ grep -B 2 -E 'last seen: 20(1|2[0123])' cireport.txt Checking name: Brocade Openstack CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Brocade_Openstack_CI first seen: 2019-03-07 02:43:59 (1781 days, 23:21:11 old) https://review.opendev.org/641539 last seen: 2019-06-17 20:36:40 (1679 days, 5:28:30 old) https://review.opendev.org/562053 -- Checking name: Cloudbase Cinder SMB3 CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Cloudbase_Cinder_SMB3_CI first seen: 2022-08-24 06:02:19 (515 days, 20:03:06 old) https://review.opendev.org/854268 last seen: 2022-11-02 13:32:21 (445 days, 12:33:04 old) https://review.opendev.org/863276 -- Checking name: DataCore CI - https://wiki.openstack.org/wiki/ThirdPartySystems/DataCore_CI first seen: 2018-10-11 20:55:57 (1928 days, 5:09:33 old) https://review.opendev.org/593191 last seen: 2020-02-13 14:16:20 (1438 days, 11:49:10 old) https://review.opendev.org/707643 -- Checking name: DellEMC PowerMAX CI - https://wiki.openstack.org/wiki/ThirdPartySystems/DellEMC_PowerMAX_CI first seen: 2022-06-17 12:14:23 (583 days, 13:51:32 old) https://review.opendev.org/821745 last seen: 2023-11-29 12:13:36 (53 days, 13:52:19 old) https://review.opendev.org/902106 -- Checking name: DellEMC SC CI - https://wiki.openstack.org/wiki/ThirdPartySystems/DellEMC_SC_CI first seen: 2022-05-24 00:06:06 (608 days, 2:00:17 old) https://review.opendev.org/839257 last seen: 2023-03-26 19:21:14 (301 days, 6:45:09 old) https://review.opendev.org/877583 -- Checking name: DellEMC VNX CI - https://wiki.openstack.org/wiki/ThirdPartySystems/DellEMC_VNX_CI first seen: 2021-09-11 03:27:04 (862 days, 22:39:38 old) https://review.opendev.org/760199 last seen: 2022-05-26 21:42:33 (605 days, 4:24:09 old) https://review.opendev.org/842131 -- Checking name: DellEMC XtremIO CI - https://wiki.openstack.org/wiki/ThirdPartySystems/DellEMC_XtremIO_CI first seen: 2021-11-17 06:06:53 (795 days, 19:59:58 old) https://review.opendev.org/818037 last seen: 2022-04-11 17:06:22 (650 days, 9:00:29 old) https://review.opendev.org/836211 -- Checking name: Fungible Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Fungible_Storage_CI first seen: 2023-02-21 10:45:34 (334 days, 15:21:31 old) https://review.opendev.org/843493 last seen: 2023-05-25 11:17:36 (241 days, 14:49:29 old) https://review.opendev.org/880275 -- Checking name: Hedvig CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Hedvig_CI first seen: 2020-11-04 02:16:19 (1173 days, 23:50:53 old) https://review.opendev.org/761160 last seen: 2020-11-20 13:10:00 (1157 days, 12:57:12 old) https://review.opendev.org/762884 -- Checking name: HPE Nimble Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/HPE_Nimble_Storage_CI first seen: 2023-04-20 19:24:38 (276 days, 6:42:42 old) https://review.opendev.org/877755 last seen: 2023-07-31 10:12:19 (174 days, 15:55:01 old) https://review.opendev.org/886456 -- Checking name: HPE Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/HPE_Storage_CI first seen: 2016-07-21 05:02:38 (2740 days, 21:04:54 old) https://review.opendev.org/344766 last seen: 2016-08-09 22:53:51 (2721 days, 3:13:41 old) https://review.opendev.org/318737 -- Checking name: HPMSA CI - https://wiki.openstack.org/wiki/ThirdPartySystems/HPMSA_CI first seen: 2023-06-07 03:02:16 (228 days, 23:05:25 old) https://review.opendev.org/850002 last seen: 2023-12-05 15:15:09 (47 days, 10:52:32 old) https://review.opendev.org/900513 -- Checking name: Huawei FusionStorage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Huawei_FusionStorage_CI first seen: 2019-02-21 15:07:45 (1795 days, 11:00:03 old) https://review.opendev.org/635203 last seen: 2020-07-23 09:23:28 (1277 days, 16:44:20 old) https://review.opendev.org/742136 -- Checking name: Huawei Volume CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Huawei_Volume_CI first seen: 2018-02-09 08:03:20 (2172 days, 18:04:47 old) https://review.opendev.org/542700 last seen: 2018-06-12 10:12:22 (2049 days, 15:55:45 old) https://review.opendev.org/574508 -- Checking name: IBM GPFS CI - https://wiki.openstack.org/wiki/ThirdPartySystems/IBM_GPFS_CI first seen: 2017-08-30 23:39:19 (2335 days, 2:28:56 old) https://review.opendev.org/499271 last seen: 2022-01-25 14:29:37 (726 days, 11:38:38 old) https://review.opendev.org/819011 -- Checking name: IBM Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/IBM_Storage_CI first seen: 2021-10-25 15:30:42 (818 days, 10:37:42 old) https://review.opendev.org/809518 last seen: 2023-07-11 09:37:45 (194 days, 16:30:39 old) https://review.opendev.org/880518 -- Checking name: Infortrend CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Infortrend_CI first seen: 2020-01-10 07:03:58 (1472 days, 19:04:35 old) https://review.opendev.org/694379 last seen: 2020-05-01 16:25:58 (1360 days, 9:42:35 old) https://review.opendev.org/722806 -- Checking name: INSPUR CI - https://wiki.openstack.org/wiki/ThirdPartySystems/INSPUR_CI first seen: 2019-08-13 20:31:35 (1622 days, 5:37:05 old) https://review.opendev.org/676274 last seen: 2020-06-09 02:34:51 (1321 days, 23:33:49 old) https://review.opendev.org/734395 -- Checking name: Intel RSD CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Intel_RSD_CI first seen: 2020-08-22 20:40:00 (1247 days, 5:28:49 old) https://review.opendev.org/747540 last seen: 2020-09-30 20:50:30 (1208 days, 5:18:19 old) https://review.opendev.org/746267 -- Checking name: Kaminario K2 CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Kaminario_K2_CI first seen: 2019-09-03 21:12:51 (1601 days, 4:56:06 old) https://review.opendev.org/679785 last seen: 2020-05-02 20:21:51 (1359 days, 5:47:06 old) https://review.opendev.org/724548 -- Checking name: openstack lightbits - https://wiki.openstack.org/wiki/ThirdPartySystems/openstack_lightbits first seen: 2023-01-18 14:02:54 (368 days, 12:06:19 old) https://review.opendev.org/865429 last seen: 2023-10-30 15:55:42 (83 days, 10:13:31 old) https://review.opendev.org/792209 -- Checking name: LINBIT LINSTOR CI - https://wiki.openstack.org/wiki/ThirdPartySystems/LINBIT_LINSTOR_CI first seen: 2019-12-23 08:12:07 (1490 days, 17:57:14 old) https://review.opendev.org/700296 last seen: 2020-04-04 21:33:05 (1387 days, 4:36:16 old) https://review.opendev.org/717383 -- Checking name: MacroSAN Volume CI - https://wiki.openstack.org/wiki/ThirdPartySystems/MacroSAN_Volume_CI first seen: 2019-06-21 02:47:54 (1675 days, 23:21:27 old) https://review.opendev.org/666477 last seen: 2019-08-21 12:59:52 (1614 days, 13:09:29 old) https://review.opendev.org/674156 -- Checking name: Mellanox CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Mellanox_CI first seen: 2021-12-02 22:17:29 (780 days, 3:51:59 old) https://review.opendev.org/733622 last seen: 2022-01-27 23:20:17 (724 days, 2:49:11 old) https://review.opendev.org/818830 -- Checking name: NetApp SolidFire CI - https://wiki.openstack.org/wiki/ThirdPartySystems/NetApp_SolidFire_CI first seen: 2022-01-07 03:00:03 (744 days, 23:09:43 old) https://review.opendev.org/796114 last seen: 2022-12-27 10:41:51 (390 days, 15:27:54 old) https://review.opendev.org/853126 -- Checking name: Nexenta CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Nexenta_CI first seen: 2023-05-18 19:46:37 (248 days, 6:23:16 old) https://review.opendev.org/881470 last seen: 2023-12-18 12:42:24 (34 days, 13:27:29 old) https://review.opendev.org/903883 -- Checking name: ProphetStor CI - https://wiki.openstack.org/wiki/ThirdPartySystems/ProphetStor_CI first seen: 2018-04-05 22:54:14 (2117 days, 3:15:54 old) https://review.opendev.org/559172 last seen: 2018-11-27 18:08:32 (1881 days, 8:01:36 old) https://review.opendev.org/603283 -- Checking name: qnap-ci - https://wiki.openstack.org/wiki/ThirdPartySystems/qnap-ci first seen: 2016-12-01 08:58:50 (2607 days, 17:11:33 old) https://review.opendev.org/313140 last seen: 2019-03-27 21:38:37 (1761 days, 4:31:46 old) https://review.opendev.org/648174 -- Checking name: Quobyte CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Quobyte_CI first seen: 2020-08-05 14:17:31 (1264 days, 11:53:01 old) https://review.opendev.org/742491 last seen: 2020-10-26 22:12:30 (1182 days, 3:58:02 old) https://review.opendev.org/754728 -- Checking name: SandStone Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/SandStone_Storage_CI first seen: 2019-09-04 11:39:43 (1600 days, 14:30:51 old) https://review.opendev.org/679970 last seen: 2020-04-19 05:55:57 (1372 days, 20:14:37 old) https://review.opendev.org/720678 -- Checking name: Seagate CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Seagate_CI first seen: 2023-01-27 08:03:49 (359 days, 18:06:55 old) https://review.opendev.org/851640 last seen: 2023-05-25 22:32:18 (241 days, 3:38:26 old) https://review.opendev.org/884253 -- Checking name: Synology DSM CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Synology_DSM_CI first seen: 2020-09-04 18:45:57 (1234 days, 7:25:05 old) https://review.opendev.org/749996 last seen: 2020-11-20 08:17:25 (1157 days, 17:53:37 old) https://review.opendev.org/757082 -- Checking name: TOYOU TYDS CI - https://wiki.openstack.org/wiki/ThirdPartySystems/TOYOU_TYDS_CI first seen: 2021-11-20 16:22:53 (792 days, 9:48:15 old) https://review.opendev.org/818098 last seen: 2023-10-18 01:25:34 (96 days, 0:45:34 old) https://review.opendev.org/898600 -- Checking name: Veritas Access CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Veritas_Access_CI first seen: 2018-12-11 02:38:26 (1867 days, 23:32:48 old) https://review.opendev.org/624193 last seen: 2019-03-15 10:56:07 (1773 days, 15:15:07 old) https://review.opendev.org/643555 -- Checking name: Virtuozzo Storage CI - https://wiki.openstack.org/wiki/ThirdPartySystems/Virtuozzo_Storage_CI first seen: 2019-08-09 21:32:36 (1626 days, 4:38:47 old) https://review.opendev.org/664860 last seen: 2019-09-25 02:45:11 (1579 days, 23:26:12 old) https://review.opendev.org/639180

4 4

[kolla-ansible] [cinder] how to add 2nd storage?
by garcetto 30 Jan '24

30 Jan '24

good morning, how can i add a second storage (for example another ceph, or nfs...) to my openstack kolla ansible cluster? thank you.

3 5

[cinder][nova] server create boot volume choosing
by garcetto 30 Jan '24

30 Jan '24

good afternoon, i have multiple backend types, so also different volumes types; is there an option on "openstack server create" to also specify the volume type on instance creation time? thank you.

3 4

[kolla-ansible] Static haproxy configuration for manually deployed services
by Jan Wasilewski 30 Jan '24

30 Jan '24

Hi, I wanted to inquire about the possibility of configuring the haproxy service for a non-standard OpenStack service. Specifically, I'm referring to Vault, which I use as a backend for the Barbican service. I would like to configure the haproxy settings somewhat "statically," but I want this configuration to be applied during deployment with kolla-ansible. While inserting non-standard configurations for OpenStack services like Cinder or Barbican in the directory */etc/kolla/config/<openstack_service>/<openstack_service.conf>* works, the same approach doesn't seem to work for haproxy. I have created a configuration for vault.cfg as outlined in [1], but when executing: kolla-ansible -i multinode --tags common,haproxy deploy the configured settings are not being read into the haproxy settings. Am I doing something wrong, or is this functionality not possible in this manner, requiring a different configuration approach? I would appreciate any advice and guidance on this matter. Best regards, /JW References: [1] https://paste.openstack.org/show/bU3ytwRvAopM78S7lg34/

3 3

[kolla-ansible] remove a service and container
by garcetto 30 Jan '24

30 Jan '24

good morning, is it possible to remove a service with kolla-ansible? got the same problems as here ( https://stackoverflow.com/questions/64930136/what-is-the-proper-way-to-remo…) and seems there is no solution ( https://bugs.launchpad.net/kolla-ansible/+bug/1874044) thank you.

2 1

[tc] Technical Committee Meeting Jan 30, 2024 at 1800UTC
by Jay Faulkner 30 Jan '24

30 Jan '24

Hi all, The next meeting of the Technical Committee will be tomorrow, Tuesday January 30 at 1800 UTC in #openstack-tc on OFTC. Please see the proposed agenda below: Agenda - Roll call - Follow up on tracked action items - No action items from Jan 24 meeting. - Gate health check - Implementation of Unmaintained branch statuses - project team guide change: https://review.opendev.org/c/openstack/project-team-guide/+/897505 (in HTML <https://45faea0ad451d95614b7-e39b4e99c90af072f68eb1bcdd078a04.ssl.cf2.rackc…> ) - 2024.1 TC Tracker - https://etherpad.opendev.org/p/tc-2024.1-tracker - Open Discussion and Reviews Thanks, Jay Faulkner OpenStack TC Chair

1 0

Cinder multi availability_zone, nova lookup problems
by Henrik Hansen 29 Jan '24

29 Jan '24

Good evening, we are currently deploying openstack in a two AZ setup, in this setup we have two different SAN FC Boxes which are only reachable via the corresponding zone. Means, we have two cinder instances, each one is configured with a backend service towards the storage. In cinder.conf [storage] we have backend_availability_zone set, towards the correct zone name. If i create two bootable volumes, cinderis selecting the right cinder-schueduler with the right storage: (venv-kolla)# openstack volume create --size 10 --image cirros --availability-zone DUS --bootable DUS_1 +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | attachments | [] | | availability_zone | DUS | | bootable | false | | consistencygroup_id | None | | created_at | 2024-01-23T22:22:21.979063 | | description | None | | encrypted | False | | id | 217943c3-44dd-4a8c-aad7-2ab33b17bab3 | | migration_status | None | | multiattach | False | | name | DUS_1 | | properties | | | replication_status | None | | size | 10 | | snapshot_id | None | | source_volid | None | | status | creating | | type | __DEFAULT__ | | updated_at | None | | user_id | 47f5bd8b0f154da69bb2375fcc3a3baf | +---------------------+--------------------------------------+ (venv-kolla)# openstack volume create --size 10 --image cirros --availability-zone LEV --bootable LEV_1 +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | attachments | [] | | availability_zone | LEV | | bootable | false | | consistencygroup_id | None | | created_at | 2024-01-23T22:23:12.327244 | | description | None | | encrypted | False | | id | 7850da99-43d0-4b58-9134-a7e7bc930cf0 | | migration_status | None | | multiattach | False | | name | LEV_1 | | properties | | | replication_status | None | | size | 10 | | snapshot_id | None | | source_volid | None | | status | creating | | type | __DEFAULT__ | | updated_at | None | | user_id | 47f5bd8b0f154da69bb2375fcc3a3baf | +---------------------+--------------------------------------+ if i create servers with boot-from-volume and a availability-zone, the job failed. (venv-kolla)# openstack server create --image cirros --boot-from-volume 10 --network fw --flavor m1.tiny --availability-zone DUS DUS1 +-------------------------------------+--------------------------------------+ | Field | Value | +-------------------------------------+--------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | DUS | | OS-EXT-SRV-ATTR:host | None | | OS-EXT-SRV-ATTR:hypervisor_hostname | None | | OS-EXT-SRV-ATTR:instance_name | | | OS-EXT-STS:power_state | NOSTATE | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | None | | OS-SRV-USG:terminated_at | None | | accessIPv4 | | | accessIPv6 | | | addresses | | | adminPass | gKsNQTfC6vYe | | config_drive | | | created | 2024-01-23T22:29:47Z | | flavor | m1.tiny (1) | | hostId | | | id | a838b078-cda0-47de-bf5d-0b6cc632425c | | image | N/A (booted from volume) | | key_name | None | | name | DUS1 | | progress | 0 | | project_id | e435c2936cbf4eb9abc38a48181ab9bf | | properties | | | security_groups | name='default' | | status | BUILD | | updated | 2024-01-23T22:29:47Z | | user_id | 47f5bd8b0f154da69bb2375fcc3a3baf | | volumes_attached | | +-------------------------------------+--------------------------------------+ (venv-kolla)# openstack server create --image cirros --boot-from-volume 10 --network fw --flavor m1.tiny --availability-zone LEV LEV1 +-------------------------------------+--------------------------------------+ | Field | Value | +-------------------------------------+--------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | LEV | | OS-EXT-SRV-ATTR:host | None | | OS-EXT-SRV-ATTR:hypervisor_hostname | None | | OS-EXT-SRV-ATTR:instance_name | | | OS-EXT-STS:power_state | NOSTATE | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | None | | OS-SRV-USG:terminated_at | None | | accessIPv4 | | | accessIPv6 | | | addresses | | | adminPass | L6vDvCoevTBC | | config_drive | | | created | 2024-01-23T22:30:11Z | | flavor | m1.tiny (1) | | hostId | | | id | 2434f84f-08f3-4e8d-8c8d-67a6b78f2cbe | | image | N/A (booted from volume) | | key_name | None | | name | LEV1 | | progress | 0 | | project_id | e435c2936cbf4eb9abc38a48181ab9bf | | properties | | | security_groups | name='default' | | status | BUILD | | updated | 2024-01-23T22:30:11Z | | user_id | 47f5bd8b0f154da69bb2375fcc3a3baf | | volumes_attached | | +-------------------------------------+--------------------------------------+ in cinder-scheduler.log i see following: Task 'cinder.scheduler.flows.create_volume.ExtractSchedulerSpecTask;volume:create' (93b2aa0f-5cdb-4f13-abdf-416c2b226917) transitioned into state 'SUCCESS' from state 'RUNNING' with result '{'request_spec': RequestSpec(CG_backend=<?>,availability_zones=['nova'] ... The creation of a bootable volume, results in the following log entry: Task 'cinder.scheduler.flows.create_volume.ExtractSchedulerSpecTask;volume:create' (7d6130e8-f9d9-4d3b-bca1-e899690e7855) transitioned into state 'SUCCESS' from state 'RUNNING' with result '{'request_spec': RequestSpec(CG_backend=<?>,availability_zones=['LEV']... So from my understanding, the create request towards nova, results in AvailabilityZone=nova, which the cinder AvailabilityZoneFilter can't handle. Does someone have a idea, how i can fix this behaviour? Thanks in advance! -- Mit freundlichen Grüßen Henrik Hansen

2 1

[devstack] how to change from ovn to ovs?
by garcetto 29 Jan '24

29 Jan '24

good morning, devstack by default install ovn (and in particular l3 ovn agent), BUT i would like to install fwaas v2, that does NOT support ovn, so i would like to set devstack to use plain old ovs, IS IT POSSIBLE? thank you.

3 3

[masakari] How to add blueprint link on masakari meeting agenda?
by 김도균 29 Jan '24

29 Jan '24

3 2

VMs shut themselves down
by Karera Tony 29 Jan '24

29 Jan '24

Hello Team, I have an openstack environment with 4 compute Nodes however yesterday out of the blue, the Instances on one of the compute nodes started shutting themselves down. Then I realized the the compute service was disabled when I checked in Horizon. I enabled it and restarted the instances and all was well but I cant figure out what caused it. I have attached the nova_compute logs here incase someone would like to support https://paste.openstack.org/show/bxqpgjvqT3DlOYWoeejc/ Regards Tony Karera

3 6

[tc][releases][ptl][all] Yoga transition to 'Unmaintained' status
by Brian Rosmaita 27 Jan '24

27 Jan '24

Hello Stackers, The release team has proposed patches to all projects to transition Yoga to Unmaintained status: https://review.opendev.org/q/topic:%22yoga-unmaintained%22 These patches tag stable/yoga with 'yoga-eom' and create the unmaintained/yoga branch. Here is the key takeaway from this email: PLEASE DO NOT MERGE ANYTHING INTO stable/yoga in the short period after it's been tagged yoga-eom and before the stable/yoga branch is deleted. Other to-dos/info: Abandon any open reviews on stable/yoga immediately. (The release team called for final yoga releases back in November 2023 [0].). Feel free to leave a note that abandoned patches can be re-proposed to unmaintained/yoga if the proposer is still interested. This will speed up the branch deletion process. Otherwise, the release team will have to abandon reviews before stable/yoga can be deleted, which obviously will dump more work on the release team that they'll have to squeeze in around all their normal activities. The stable/yoga branches will be deleted by the release team. The global openstack-unmaintained-core team will, by default, handle maintenance of unmaintained/yoga branches (both CI and merging patches). If your project wants to have its own <project>-unmaintained-core team, it's allowed, but you have to create it yourself. For an example, see https://review.opendev.org/c/openstack/project-config/+/902796 More information about Unmaintained branches is contained in this patch to the project-team-guide: https://review.opendev.org/c/openstack/project-team-guide/+/897505 (Given that this is the first time we're doing the transition-to-Unmaintained process, it would be helpful for all interested people to look at the above patch and leave comments and/or requests for clarifications.) Thanks for your attention to this email! [0] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack…

1 0

Instances Shutting down themselves
by Karera Tony 27 Jan '24

27 Jan '24

Hello Team, For some reason today morning VMs on one of my compute Nodes started shutting down themselves. When I checked in Horizon, I realized that that particular Compute was disabled and I enabled it. I restarted the Instances and all is well now. I have attached the Logs for nova-compute in case someone would like to help. Regards Tony Karera

2 1

[masakari] [masakari-monitors] Feature to monitor hosts by kubernetes
by 김도균 26 Jan '24

26 Jan '24

1 0

[masakari] [masakari-monitors] Feature to monitor hosts by kubernetes
by 김도균 26 Jan '24

26 Jan '24

1 0

[masakari] [masakari-monitors] Feature to monitor hosts by kubernetes
by d0gyun.kim＠samsung.com 26 Jan '24

26 Jan '24

Hi team masakari I'm do-gyun kim working on SAMSUNG SDS in Seoul. We are using openstack on kubernetes and also masakari for HA. We have developed a function internally to masakari-monitors for k8s-native openstack and want to contribute! blueprint: https://blueprints.launchpad.net/masakari/+spec/host-monitors-by-kubernetes

1 0

[swift][acl][s3api] Manage Container ACL
by Thiago De Moraes Teixeira 26 Jan '24

26 Jan '24

Hi, How can I grant access for other users in my bucket, using s3api, using tempauth (locally tests) and keystone? With: *aws s3api put-bucket-acl --bucket bucket --grant-full-control id=test:tester* (tempauth) I can confirm that this acl was updated inside the container metadata, in container.db, like this *"X-Container-Sysmeta-S3Api-Acl": [ "{\"Owner\":\"thiago:th\",\"Grant\":[{\"Permission\":\"FULL_CONTROL\",\"Grantee\":\"test:tester\"}]}", "1706210273.48975" ]* But when authenticated by test:tester, I can't read/write to that container. -- _‘Esta mensagem é direcionada apenas para os endereços constantes no cabeçalho inicial. Se você não está listado nos endereços constantes no cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas estão imediatamente anuladas e proibidas’._ * **‘Apesar do Magazine Luiza tomar todas as precauções razoáveis para assegurar que nenhum vírus esteja presente nesse e-mail, a empresa não poderá aceitar a responsabilidade por quaisquer perdas ou danos causados por esse e-mail ou por seus anexos’.*

1 0

[neutron][antelope] neutron has error "/neutron-rootwrap: Unauthorized command: ip netns" after switch from openvswitch to linuxbridge
by dieter.dorra＠hsnr.de 26 Jan '24

26 Jan '24

Initially I've installed Antelope with openvswitch as described in the docs, but after switching back to linuxbridge neutron fails with errors on control: neutron-l3-agent.log: 2024-01-23 21:54:07.364 192544 ERROR neutron_lib.callbacks.manager neutron_lib.exceptions.ProcessExecutionError: Exit code: 99; Cmd: ['ip', 'netns', 'exec', 'qrouter-ce46ba37-9b08-4c08-a31c-0d38ff3d1438', 'env', 'PROCESS_TAG=haproxy-ce46ba37-9b08-4c08-a31c-0d38ff3d1438', 'haproxy', '-f', '/var/lib/neutron/ns-metadata-proxy/ce46ba37-9b08-4c08-a31c-0d38ff3d1438.conf']; Stdin: ; Stdout: ; Stderr: /usr/bin/neutron-rootwrap: Unauthorized command: ip netns exec qrouter-ce46ba37-9b08-4c08-a31c-0d38ff3d1438 env PROCESS_TAG=haproxy-ce46ba37-9b08-4c08-a31c-0d38ff3d1438 haproxy -f /var/lib/neutron/ns-metadata-proxy/ce46ba37-9b08-4c08-a31c-0d38ff3d1438.conf (no filter matched) 2024-01-23 21:54:07.364 192544 ERROR neutron_lib.callbacks.manager neutron-dhcp-agent.log 2024-01-23 21:58:38.754 192061 ERROR neutron.agent.linux.utils [None req-64a0a2f6-ec71-4288-900f-f86f0bd903e0 - - - - - -] Exit code: 99; Cmd: ['ip', 'netns', 'exec', 'qdhcp-ce84c378-6260-455f-8816-bb1d640aa42c', 'env', 'PROCESS_TAG=haproxy-ce84c378-6260-455f-8816-bb1d640aa42c', 'haproxy', '-f', '/var/lib/neutron/ns-metadata-proxy/ce84c378-6260-455f-8816-bb1d640aa42c.conf']; Stdin: ; Stdout: ; Stderr: /usr/bin/neutron-rootwrap: Unauthorized command: ip netns exec qdhcp-ce84c378-6260-455f-8816-bb1d640aa42c env PROCESS_TAG=haproxy-ce84c378-6260-455f-8816-bb1d640aa42c haproxy -f /var/lib/neutron/ns-metadata-proxy/ce84c378-6260-455f-8816-bb1d640aa42c.conf (no filter matched) Any help appreciated.

2 2

Credentials in DEBUG log
by Max Harmathy 26 Jan '24

26 Jan '24

Hi, I am using the python sdk. If I set the loglevel to DEBUG then credentials will land in the log output. Is there a way to have the credentials filtered out? Max

2 1

[largescale-sig] Ops Deep Dive: YOU propose the next episodes!
by Thierry Carrez 25 Jan '24

25 Jan '24

Hi everyone, You may be familiar with the Large Scale SIG's "Ops Deep Dive" series on OpenInfra Live[1], where our recurring hosts (Arnaud Morin, Mohammed Naser, Felix Huttner and Belmiro Moreira) discuss with operator guests the details of their large scale OpenStack deployment or a given operational topic. [1] https://openinfra.dev/live/#all-episodes For 2024, we want to open things up a bit. If YOU have a large scale deployment that you would like to discuss with our hosts, or if YOU have an idea of an operational challenge that you would like to discuss with your peers (and you have secured their interest in joining), please submit your idea to https://ideas.openinfra.live and we'll consider it during our next Large Scale SIG meeting. Hope to see you next on the Ops Deep Dive ! -- Thierry Carrez (ttx)

1 0

[glalnce][ceph] delete snapshot after creating instance
by Satish Patel 25 Jan '24

25 Jan '24

Folks, I have two openstack clouds and both have their own Ceph backend storage.I am trying to migrate instances from openstack A to openstack B. 1. Take a snapshot from A 2. Export snapshot and import to B 3. Create instance on B 4. Delete snapshot - (I am getting error because its in-use) Because it has a parent reference to that volume. How do I remove the reference so it will let me delete a snapshot. Reason I am asking is because I have so many VMs to migrate and don't want glance to have 100s of entities in those snapshots. What is the alternative here? I can try qcow2 if that is the final solution to make it clean. # rbd -p volumes info volume-f2b2aec2-cc57-49e5-aca1-54b5a7ee9f3a rbd image 'volume-f2b2aec2-cc57-49e5-aca1-54b5a7ee9f3a': size 40 GiB in 5120 objects order 23 (8 MiB objects) snapshot_count: 0 id: 5473c827864fed block_name_prefix: rbd_data.5473c827864fed format: 2 features: layering, exclusive-lock, object-map, fast-diff, deep-flatten op_features: flags: create_timestamp: Fri Jan 19 19:03:25 2024 access_timestamp: Wed Jan 24 15:51:04 2024 modify_timestamp: Wed Jan 24 15:52:40 2024 parent: images/3708f961-fb74-49f1-ab9b-40cf7954abed@snap overlap: 40 GiB

3 16

A questionnaire for unmaintained package users
by zhiqingzhong＠link.cuhk.edu.cn 25 Jan '24

25 Jan '24

1 0

[kolla][trove] Best practice to make guest-agent communicate with RPC
by Satish Patel 25 Jan '24

25 Jan '24

Folks, I am trying to find a kolla-ansible doc related to how to implement trove in production with best practices. Especially when a guest-agent (running inside VM) talks to RPC service. How are other folks doing in their environments? In most cases RPC is an internal service and not visible to any guest VMs. Looking for some guidance.

3 21

[Kolla-ansible][Ironic] Ironic PXE boot not working
by Jayesh Chaudhari 25 Jan '24

25 Jan '24

Hi, I have deployed following setup Openstack Version : Yoga Deployment Method : Kolla-ansible Node Provisioning tool : MAAS Now I am trying to integrate ironic service in it for BareMetal as a Service. My configuration for ironic in global.yml is following: enable_ironic: "yes" ironic_dnsmasq_interface: "ens2f0" #10G interface ironic_dnsmasq_dhcp_range: "10.145.50.50,10.145.50.60,255.255.255.192" ironic_cleaning_network: "ironic_provisioning_network" ironic_dnsmasq_default_gateway: 10.145.50.1 ironic_dnsmasq_boot_file: "pxelinux.0" ironic_inspector_kernel_cmdline_extras: ['ipa-lldp-timeout=90.0', 'ipa-collect-lldp=1'] ironic_http_port: "8089" ironic_enable_keystone_integration: "yes" My deployment is successful, but when I try to create openstack instance with baremetal flavor it stuck in pxe boot. If I use my 1G interface as ironic_dnsmasq_interface it pxe boot from MAAS. Is there any way I can use MAAS with ironic ? or how I can proceed with 10G interface? Thanks, Jayesh

1 0

[kolla-ansible][senlin] dashboard help
by garcetto 25 Jan '24

25 Jan '24

good afternoon, i set enable_senlin: "yes" on globals.yaml, but see no senlin dashboard, my fault? thank you.

2 1

[largescale-sig] Next meeting: January 24, 16utc
by Thierry Carrez 25 Jan '24

25 Jan '24

Hi everyone, The Large Scale SIG will be meeting this Wednesday in #openstack-operators on OFTC IRC, at 16UTC, our EU+US-friendly time. You can doublecheck how that UTC time translates locally at: https://www.timeanddate.com/worldclock/fixedtime.html?iso=20240124T16 Feel free to add topics to the agenda: https://etherpad.opendev.org/p/large-scale-sig-meeting Regards, -- Thierry Carrez

1 1

[keystone] meeting canceled this week (24-Jan-2024)
by Dave Wilde 24 Jan '24

24 Jan '24

Hi folks, Sorry for the late notice but I unfortunately need to cancel the Keystone weekly meeting for today. Please add any agenda items here [1] and ping me via email or at d34dh0r53 on IRC. Thanks! 1: https://etherpad.opendev.org/p/keystone-weekly-meeting /Dave

1 0

[ops] help with openstack horizon
by Shubham Yadav 24 Jan '24

24 Jan '24

I have a question, is it possible to set in Horizon just one language - English? I mean that if you are new and login to openstack it will automatically set the language according to your browser. This could be sometimes confusing when you want to navigate by phone somebody with low expertise in OpenStack. is there any conf i can add in my horizon or theres any other way that stops browser from changing language in horizon? Hope to hear from you soon Thank You!

1 0

Re:RE: Mapping local SSD to virtual machine persistently
by 龚永生 24 Jan '24

24 Jan '24

How about ephemeral storage with the ssd? 龚永生浙江九州未来信息科技有限公司 99CLOUD Co. Ltd. 邮箱（Email）：gong.yongsheng(a)99cloud.net 地址：海淀区上地六街研华大厦5层南侧手机（Mobile)：+86-18618199879 公司网址（WebSite）：http://99cloud.net 发件人：Sang Tran Quoc <SangTQ8(a)fpt.com> 发送日期：2024-01-24 11:06:28 收件人：Karl Kloppenborg <kkloppenborg(a)resetdata.com.au>,"smooney(a)redhat.com" <smooney(a)redhat.com>,"openstack-discuss(a)lists.openstack.org" <openstack-discuss(a)lists.openstack.org> 抄送人：Cuong Truong Tran Quoc <CuongTTQ(a)fpt.com> 主题：RE: Mapping local SSD to virtual machine persistently Hi @smooney@redhat.com , and @Karl Kloppenborg Thanks for your helps. I also have questions regarding to your suggestion as below: @smooney@redhat.com Did you mention about cinder-volume with LVM driver? I tested it before, but the performance does not meet the requirement cause of the transportation of data via iSCSI protocol and it hard to compare with direct attach via libvirt. Your second idea are using flavor with ephemeral disk, right? @Karl Kloppenborg Your workaround suggestion looks good to me; I will search around for the accurate RabbitMQ event as you mentioned. Best Regards Sang. From: Karl Kloppenborg <kkloppenborg(a)resetdata.com.au> Sent: Wednesday, January 24, 2024 6:45 AM To: smooney(a)redhat.com; Sang Tran Quoc <SangTQ8(a)fpt.com>; openstack-discuss(a)lists.openstack.org Subject: Re: Mapping local SSD to virtual machine persistently Hey guys, One suggestion which might help you as a work around: Libvirt regenerates the xml’s based on nova receiving events via the RabbitMQ event bus. One option (which will require a bit of programming on your part) is to listen to the events that might impact the libvirt generation and execute the commands on your behalf. This would necessitate knowing/storing that VM->Device mapping somewhere, i.e a database. Thanks, Karl. From: smooney(a)redhat.com <smooney(a)redhat.com> Date: Tuesday, 23 January 2024 at 10:04 pm To: Sang Tran Quoc <SangTQ8(a)fpt.com>, openstack-discuss(a)lists.openstack.org <openstack-discuss(a)lists.openstack.org> Subject: Re: Mapping local SSD to virtual machine persistently On Tue, 2024-01-23 at 10:30 +0000, Sang Tran Quoc wrote: > > Hello community, > > I've got a question related to the raw device mapping to the OpenStack virtual machine. The situation is I have > several SSDs along with my compute node and I would like to attach these SSDs to my virtual machine for enhancing the > disk performance. My current solution is using command "virsh attach-disk <dom> <host-device> <guest-device>" but it > not persistently and need to manual re-attach after hard-rebooting which lead to re-generate the xml vm structure. > So, I wonder if there is an official solution for my problems. Thank you and welcome for every help in our community. This is currenly not supported in openstack. we have discussed adding local storage functionality to nova in the past but its non triavial since we woudl need a new rest api to allow attaching/detaching them and schduelr intengration. unfortuntly that means that today you cannot achive your goal. if you need to attach addtional storage dynamically your only option is cinder volumes. you can provide addtional storage in the flavor but only statical > > Best regards, > Sang Tran

3 2

[Glance] Weekly Meeting Cancelled for this Week
by Pranali Deore 24 Jan '24

24 Jan '24

Hello, As discussed during the last meeting[1], the glance meeting is cancelled for this week. See you next week ! [1]: https://meetings.opendev.org/irclogs/%23openstack-meeting/%23openstack-meet… Thanks & Regards, Pranali D.

1 0

Re: Security Group
by Rodolfo Alonso Hernandez 24 Jan '24

24 Jan '24

Hello Benyamin: Please check the Neutron security group documentation. What you are doing is to filter by an inport, traffic type (IPv4, TCP) and a dst port. This is something that you can done using the SG API: https://docs.openstack.org/python-openstackclient/pike/cli/command-objects/… . Regards. On Wed, Jan 24, 2024 at 10:15 AM benyamin sam khanyani < bsamkhaniyani(a)gmail.com> wrote: > Hello Rodolf: > > As an example, I have added an ACL rule by following command: > > ovn-nbctl acl-add c56beb58-5eca-4c16-ad75-b28ff2b33b83 to-lport 1002 > "outport == @pg_55bcfed5_3355_4de7_a5c3_53f256f83e81 && ip4 && ip4.src == > 0.0.0.0/0 && tcp && tcp.dst == 555" allow-related > > I can see it when I run the "ovn-nbctl list acl" command and it works > properly in my environment. Now, I want to make it permanent but as you > said, it's not possible and the only source of truth is Neutron. > > As a result, none of ovn-nbctl commands work permanently and everything > must be changed by Neutron. So, I want to ask you if it is possible to have > a way to make these commands permanent. I think the db_sync function can be > enhanced and it can facilitate networking in OpenStack because there are a > variety of changes we can apply by ovn-nbctl commands and these are not > possible by using Neutron. > > Best, > Ben > > On Tue, 23 Jan 2024 at 20:08, Rodolfo Alonso Hernandez < > ralonsoh(a)redhat.com> wrote: > >> Hello Benyamin: >> >> Can you specify what rules are you manually creating the OVN database? >> >> The code you are referring to is the sync tool. The goal of this tool is >> to sync both databases, OVN and Neutron. But please remember that Neutron >> is the CMS, is the only source of truth and it controls the network >> backend, in this case OVN. Any definition should be done in Neutron and any >> manual change in the OVN database will be restored or the environment will >> fail. >> >> Regards. >> >> On Tue, Jan 23, 2024 at 11:15 AM benyamin sam khanyani < >> bsamkhaniyani(a)gmail.com> wrote: >> >>> Thanks for your comprehensive reply. >>> >>> I apply completely similar rules to what Neutron installs on OVN >>> Northbound Database and I think it is compatible with LB, OVS, and OVN. I >>> think the main issue is the sync mechanism between Neutron DB and OVN >>> Northbound DB[1](Line 244). Clearly, It's not a bug but I think this >>> function can be enhanced in order to support changes which can be defined >>> directly in OVN Northbound DB. As there are a variety of functionalities in >>> ovn-nbctl and ovn-sbctl command line tools, I believe that it could be >>> beneficial. >>> >>> [1] >>> https://github.com/openstack/neutron/blob/dad8c3fecc4e97764a92f558d9df510fa… >>> >>> >>> On Mon, 22 Jan 2024 at 18:31, Rodolfo Alonso Hernandez < >>> ralonsoh(a)redhat.com> wrote: >>> >>>> Hello Benyamin: >>>> >>>> I'm guessing from your mail that you are referring to Neutron security >>>> groups and you are using ML2/OVN. Any SG rule should be defined in Neutron, >>>> not in OVN directly. The Neutron SG rules are translated to ACLs and >>>> applied to a port group. If you are interested in how this is done, please >>>> check [1]. >>>> >>>> If you want to add any new functionality to the SG rules, you should >>>> create a LP bug [2] with a RFE. This RFE should be a high level description >>>> of what want to implement. Be aware that we have multiple mechanism drivers >>>> in-tree: LB, OVS and OVN. This feature should be compatible with all of >>>> them. The RFE can be discussed during the Neutron drivers meetings [3]. >>>> >>>> Regards. >>>> >>>> [1] >>>> https://github.com/openstack/neutron/blob/master/neutron/plugins/ml2/driver… >>>> [2]https://bugs.launchpad.net/neutron/ >>>> [3]https://meetings.opendev.org/#Neutron_drivers_Meeting >>>> >>>> On Mon, Jan 22, 2024 at 3:41 PM benyamin sam khanyani < >>>> bsamkhaniyani(a)gmail.com> wrote: >>>> >>>>> Hi, >>>>> >>>>> I am working on the security group and aim to extend its functionality >>>>> by applying custom rules based on source and destination ports, arbitrary >>>>> match criteria, actions, and so on. I did it by using ovn-nbctl commands >>>>> and everything worked well. Unfortunately, the only issue is that I can not >>>>> see my custom rules in MariaDB and I didn't find any other solution for >>>>> defining security group rules with my desired options. So, I want to ask >>>>> you how I can tackle this issue? >>>>> >>>>> Regards, >>>>> Benjamin Sam >>>>> >>>>

1 0

Instances shutting themselves down
by Karera Tony 24 Jan '24

24 Jan '24

Hello Team, I have an openstack environment with 4 compute Nodes however yesterday out of the blue, the Instances on one of the compute nodes started shutting themselves down. Then I realized the the compute service was disabled when I checked in Horizon. I enabled it and restarted the instances and all was well but I cant figure out what caused it. I have attached the nova_compute logs here incase someone would like to support https://paste.openstack.org/show/bxqpgjvqT3DlOYWoeejc/ Regards Tony Karera

2 1

Mapping local SSD to virtual machine persistently
by Sang Tran Quoc 24 Jan '24

24 Jan '24

Hello community, I've got a question related to the raw device mapping to the OpenStack virtual machine. The situation is I have several SSDs along with my compute node and I would like to attach these SSDs to my virtual machine for enhancing the disk performance. My current solution is using command "virsh attach-disk <dom> <host-device> <guest-device>" but it not persistently and need to manual re-attach after hard-rebooting which lead to re-generate the xml vm structure. So, I wonder if there is an official solution for my problems. Thank you and welcome for every help in our community. Best regards, Sang Tran

3 3

Openstack-Ansible External Networking OVN (Br-ex)
by jjjamesg 24 Jan '24

24 Jan '24

I can't for the life of me get external connectivity working, openstack itself works i just cant get external connectivity working, I can see ovs has created br-ex with bond1 attached. ovs-vsctl get open . external_ids:ovn-bridge-mapping shows: "physnst1:br-ex" I have tried creating the network with both: openstack network create --share --external --provider-physical-network physnet1 --provider-network-type vlan --provider-segment 233 public openstack network create --share --external --provider-physical-network physnet1 --provider-network-type flat publicnet-flat Only errors i can see is in the neutron container when i try and either create an instance on said network or attach a fip is is: (similar errors from a vlan type network this is just the error i pulled at the time) ERROR neutron.plugins.ml2.managers [req-de7f1cb8-ac8e-4dd6-ad2a-e14afdb152b5 req-c6a2aaff-ccf9-4ef3-9ef 7-1a8e4c7a1e41 9c27de6bdc4449abbbbcd5e5c4951bb9 2fced1ff77f5428eb2b63879bdd608cc - - default default] Failed to bind port 03cc1708-d4a2-4b11-bca2-40ebe0acff60 on host 02 for vnic_type normal using segments [{'id': '2ef64682-b5ff-472b-935d-a3c2b615d70f', 'network_type': 'flat', 'physical_network': 'physnet1', 'segmentation_id': None, 'network_id': '52b4f4e9-47f3-431b-8c45-ec8cc17f561d'}] WARNING neutron.scheduler.dhcp_agent_scheduler [None req-aafa81d9-479c-4f56-be6f-54d4ab3b42aa 1b29a 2297a224cdcaaba84e0eac30205 bafabcf2414d4adf98cab165c3f3de12 - - default default] No more DHCP agents WARNING neutron.api.rpc.agentnotifiers.dhcp_rpc_agent_api [None req-aafa81d9-479c-4f56-be6f-54d4ab3b42aa 1b29a2297a224cdcaaba84e0eac30205 bafabcf2414d4adf98cab165c3f3de12 - - default default] Unable to schedule network 5fa049f5-0ed4-4287-9c63-dd753c853c35: no agents available; will retry on subsequent port and subnet creation events. I just cant figure out WHY this isn't working.. Below is my config: ############# ### /etc/network/interfaces: ############# auto bond1 iface bond1 inet manual bond-slaves eno2 eno4 bond-mode 802.3ad bond-miimon 100 bond-downdelay 200 bond-updelay 200 bond-lacp-rate 1 mtu 9000 auto bond1.30 iface bond1.30 inet manual vlan-raw-device bond1 ## (br-pubv is for my public vip) auto bond1.232 iface bond1.232 inet manual vlan-raw-device bond1 auto br-overlay iface br-overlay inet static bridge_stp off bridge_waitport 0 bridge_fd 0 bridge_ports bond1.30 address auto br-pubv iface br-pubv inet static address gateway bridge_stp off bridge_waitport 0 bridge_fd 0 bridge_ports bond1.232 ############# ### openstack_user_config.yml: ############# - network: container_bridge: "br-ex" network_interface: "bond1" type: "vlan" range: "232:332" net_name: "physnet1" group_binds: - neutron_ovn_controller ############# ### user_variables.yml ############# neutron_plugin_type: ml2.ovn neutron_plugin_base: - ovn-router - qos - neutron.services.ovn_l3.plugin.OVNL3RouterPlugin - neutron_dynamic_routing.services.bgp.bgp_plugin.BgpPlugin - vpnaas - metering - firewall_v2 neutron_ml2_drivers_type: "vlan,local,geneve,flat" neutron_provider_networks: network_types: "geneve" network_geneve_ranges: "1:1000" network_vlan_ranges: "physnet1" network_mappings: "physnet1:br-ex" network_interface_mappings: "br-ex:bond1" Bond1 is a trunk port (no native vlan), that has access to both overlay vlan and the 232:332 vlan range which both work when setting either network as a bridge on bond1 so connectivity is there. I have network-northd/gateway_hosts defined as well as: neutron_neutron_conf_overrides: ovn: enable_distributed_floating_ip: True openstack_host_specific_kernel_modules: - name: "openvswitch" pattern: "CONFIG_OPENVSWITCH" This should by all accounts just work, but for some reason for me it's not, what steps have i missed?

1 0

Re: Security Group
by Rodolfo Alonso Hernandez 24 Jan '24

24 Jan '24

Hello Benyamin: Can you specify what rules are you manually creating the OVN database? The code you are referring to is the sync tool. The goal of this tool is to sync both databases, OVN and Neutron. But please remember that Neutron is the CMS, is the only source of truth and it controls the network backend, in this case OVN. Any definition should be done in Neutron and any manual change in the OVN database will be restored or the environment will fail. Regards. On Tue, Jan 23, 2024 at 11:15 AM benyamin sam khanyani < bsamkhaniyani(a)gmail.com> wrote: > Thanks for your comprehensive reply. > > I apply completely similar rules to what Neutron installs on OVN > Northbound Database and I think it is compatible with LB, OVS, and OVN. I > think the main issue is the sync mechanism between Neutron DB and OVN > Northbound DB[1](Line 244). Clearly, It's not a bug but I think this > function can be enhanced in order to support changes which can be defined > directly in OVN Northbound DB. As there are a variety of functionalities in > ovn-nbctl and ovn-sbctl command line tools, I believe that it could be > beneficial. > > [1] > https://github.com/openstack/neutron/blob/dad8c3fecc4e97764a92f558d9df510fa… > > > On Mon, 22 Jan 2024 at 18:31, Rodolfo Alonso Hernandez < > ralonsoh(a)redhat.com> wrote: > >> Hello Benyamin: >> >> I'm guessing from your mail that you are referring to Neutron security >> groups and you are using ML2/OVN. Any SG rule should be defined in Neutron, >> not in OVN directly. The Neutron SG rules are translated to ACLs and >> applied to a port group. If you are interested in how this is done, please >> check [1]. >> >> If you want to add any new functionality to the SG rules, you should >> create a LP bug [2] with a RFE. This RFE should be a high level description >> of what want to implement. Be aware that we have multiple mechanism drivers >> in-tree: LB, OVS and OVN. This feature should be compatible with all of >> them. The RFE can be discussed during the Neutron drivers meetings [3]. >> >> Regards. >> >> [1] >> https://github.com/openstack/neutron/blob/master/neutron/plugins/ml2/driver… >> [2]https://bugs.launchpad.net/neutron/ >> [3]https://meetings.opendev.org/#Neutron_drivers_Meeting >> >> On Mon, Jan 22, 2024 at 3:41 PM benyamin sam khanyani < >> bsamkhaniyani(a)gmail.com> wrote: >> >>> Hi, >>> >>> I am working on the security group and aim to extend its functionality >>> by applying custom rules based on source and destination ports, arbitrary >>> match criteria, actions, and so on. I did it by using ovn-nbctl commands >>> and everything worked well. Unfortunately, the only issue is that I can not >>> see my custom rules in MariaDB and I didn't find any other solution for >>> defining security group rules with my desired options. So, I want to ask >>> you how I can tackle this issue? >>> >>> Regards, >>> Benjamin Sam >>> >>

1 0

[ops] help with multiattach volume type in cinder
by Shubham Yadav 23 Jan '24

23 Jan '24

Hi, i have a question/issue related to multiattach feature in cinder i have an openstack cluster and i have configured multiattach in the openstack cinder now when i create 1 volume (with volume type multiattach) and attach it to 2 instances test1 and test2 *on test1 sudo mkfs -t ext4 /dev/sdb sudo mkdir /mnt/mydisk sudo mount /dev/sdb /mnt/mydisk touch /mnt/mydisk/shared_file echo "This is some shared content" | sudo tee /mnt/mydisk/shared_fileon test2 sudo mkdir /mnt/mydisksudo mount /dev/sdb /mnt/mydiskls /mnt/mydisk/cat /mnt/mydisk/shared_file* i can see the shared_file now when i add new files on test1 im not able to see it on test2 untill i unmount the volume with directory and mount the directory again to the volume on test2. what could be the solution for it? how can i make the volume share datas instantly between all the instances connected to the volume i have tried with ext4 and xfs file system Hope to hear from you soon Thank you!

2 1

[tc] Next Technical Committee Meeting Jan 23 2024 1800 UTC
by Jay Faulkner 23 Jan '24

23 Jan '24

Hi all, The next meeting of the Technical Committee will be held on Tuesday, Jan 23 2024 at 1800 UTC. It will be held in #openstack-tc on OFTC. The proposed agenda is: Agenda - Roll call - Follow up on tracked action items - JayF - Email Skyline PTL about status as an emerging project; ask about future plans and investments. - slaweq - Propose patches to retire Monasca - Reach out to potential new outside-OpenStack Monasca maintainers, instruct on next-steps for reviving it in a new OpenDev namespace. - gmann - Attempt, again, to engage Senlin maintainer about next steps for the inactive Senlin project. - Gate health check - Implementation of Unmaintained branch statuses - 2024.1 TC Tracker - https://etherpad.opendev.org/p/tc-2024.1-tracker - Open Discussion and Reviews Thanks, Jay Faulkner OpenStack TC Chair

1 0

[ops] help with multiattach volume type in cinder
by Shubham Kumar Yadav 23 Jan '24

23 Jan '24

Hi, i have a question/issue related to multiattach feature in cinder i have an openstack cluster and i have configured multiattach in the openstack cinder now when i create 1 volume (with volume type multiattach) and attach it to 2 instances test1 and test2 *on test1 * *sudo mkfs -t ext4 /dev/sdb * *sudo mkdir /mnt/mydisk * *sudo mount /dev/sdb /mnt/mydisk * *touch /mnt/mydisk/shared_file echo "This is some shared content" | sudo tee /mnt/mydisk/shared_file* *on test2 * *sudo mkdir /mnt/mydisksudo mount /dev/sdb /mnt/mydiskls /mnt/mydisk/cat /mnt/mydisk/shared_file* i can see the shared_file now when i add new files on test1 im not able to see it on test2 untill i unmount the volume with directory and mount the directory again to the volume on test2. what could be the solution for it? how can i make the volume share datas instantly between all the instances connected to the volume i have tried with ext4 and xfs file system Hope to hear from you soon Thank you!

3 2

[neutron] Bug deputy report for week of January 15th
by Brian Haley 23 Jan '24

23 Jan '24

Hi, I was Neutron bug deputy last week. Below is a short summary about the reported bugs. -Brian Critical bugs ------------- * None High bugs --------- * https://bugs.launchpad.net/neutron/+bug/2049211 - neutron_tempest_plugin.api sorted() Function Issue - https://review.opendev.org/c/openstack/neutron-tempest-plugin/+/905853 Medium bugs ----------- * https://bugs.launchpad.net/neutron/+bug/2049590 - Restore the device namespace if "set_netns" fails - https://review.opendev.org/c/openstack/neutron/+/905836 * https://bugs.launchpad.net/neutron/+bug/2049615 - multisegments: cleaning DHCP process for segment 0 should happen first - https://review.opendev.org/c/openstack/neutron/+/905617 * https://bugs.launchpad.net/neutron/+bug/2049524 - [Neutron/Nova] Need to fix attaching a vip port on VMs - confirmed, needs owner * https://bugs.launchpad.net/neutron/+bug/2049624 - vpnaas problem --- strongswan on rocky 9 - Needs owner * https://bugs.launchpad.net/neutron/+bug/2049909 - MLDv2 packets sent from L3 Agent managed networks cause backup routers to be preferred - Issue was filed regarding Linuxbridge, not sure if it is also happening with ML2/OVS - https://review.opendev.org/c/openstack/neutron/+/906114 - Will need more investigation Low bugs -------- * None Misc bugs --------- * https://bugs.launchpad.net/neutron/+bug/2049546 - neutron-linuxbridge-agent ebtables RULE_DELETE failed (Invalid argument) - Duplicate of https://bugs.launchpad.net/neutron/+bug/2038541 * https://bugs.launchpad.net/neutron/+bug/2049622 - Some Port Properties Cannot Be Set - dns-name tests were failing in their environment, asked for more info on configuration as could be user error Wishlist bugs ------------- * https://bugs.launchpad.net/neutron/+bug/2049623 - [RFE] Refactor OVS Trunk plugin to have one single port

1 0

[puppet][ec2-api] Retiring puppet-ec2api
by Takashi Kajinami 23 Jan '24

23 Jan '24

Hello, As announced earlier, the EC2API project has been marked inactive[1]. We'll carefully watch the discussion between TC and the project, but unless the inactive mark is removed and the project is re-added to 2024.1 releases, I'd propose retiring puppet-ec2api, based on inactivity in the EC2 API project as well as no actual user feedback to our module. In case you have any concern, please let me know. If I get no objections and the project status is not changed, I'll start the retirement process of this module at some point during this cycle (probably m-3 or in worst case no later than GA). Thank you Takashi Kajinami irc: tkajinam [1] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack…

2 1

Security Group
by benyamin sam khanyani 23 Jan '24

23 Jan '24

Hi, I am working on the security group and aim to extend its functionality by applying custom rules based on source and destination ports, arbitrary match criteria, actions, and so on. I did it by using ovn-nbctl commands and everything worked well. Unfortunately, the only issue is that I can not see my custom rules in MariaDB and I didn't find any other solution for defining security group rules with my desired options. So, I want to ask you how I can tackle this issue? Regards, Benjamin Sam

2 1

[publiccloud-sig] Reminder - next meeting January 24th - 0800 UTC
by Felix Kronlage-Dammers 22 Jan '24

22 Jan '24

Hi everyone, This Wednesday (January 24th) the next meeting of the public cloud sig is going to happen. Since the majority of participants in the sessions started to like the videocalls, we’ll be doing this as a videocall again. We’ll be meeting at 0800 UTC here: https://conf.scs.koeln:8443/OIF-public-cloud-sig See also here for all other details: https://wiki.openstack.org/wiki/PublicCloudSIG See you Wednesday! felix -- Felix Kronlage-Dammers Product Owner IaaS & Operations Sovereign Cloud Stack Sovereign Cloud Stack — standardized, built and operated by many Ein Projekt der Open Source Business Alliance - Bundesverband für digitale Souveränität e.V. Tel.: +49-30-206539-205 | Matrix: @fkronlage:matrix.org | fkr(a)osb-alliance.com

1 0

[kolla-ansible] [cinder-backup] does support HA?
by garcetto 22 Jan '24

22 Jan '24

good afternoon, i was trying cinder-backup, deployed on 2 containers. the first one seems to do all work, the second is sitting idle. I have a couple of questions: 1. can i parallelize backup jobs so are ran on both containers? 2. in case of first container down, the second seems not to be able to do backups/restores, nay clue? thank you.

3 3

[murano][heat][mistral][tc] Maintenance of yaql library
by Takashi Kajinami 21 Jan '24

21 Jan '24

Hello, The yaql library is currently maintained under murano's governance and is used by not only murano but a few other projects such as heat and mistral. In heat the library is essential since we introduced yaql function support. Looking at gerrit groups, I noticed the yaql library is maintained by a very small core group[1] and release group[2], but I'm afraid most of the people in these groups are no longer active in the community. Because heat is dependent on the library, I'm wondering if some of the heat cores can be added to these two groups so that we (at least I) can help maintaining the library. I've checked the changes merged into murano repo for these two years but iiuc all of these changes are gate fix. Also a dummy change[3] indicates that its CI is currently broken. If the murano project is no longer active then I'm also willing to take over yaql and bring it to heat's governance (of cause only if it's acceptable). I'll add the current PTL as cc, but please let me know if anyone has any opinion or concern. # I'll add mistral tag because the project is also dependent on yaql. # Also tc is added because this discussion is related to project governance. Thank you Takashi Kajinami [1] https://review.opendev.org/admin/groups/cba4f6fd54c3cc0d5706fc50b5ebd758860… [2] https://review.opendev.org/admin/groups/d5e894b34e5ab5a9fc2938a0d4e7bc76fd2… [3] https://review.opendev.org/c/openstack/murano/+/901888

3 7

RDO at CentOS Connect and FOSDEM
by Amy Marrich 21 Jan '24

21 Jan '24

I just wanted to let folks know about some opportunities to learn more about RDO and interact with members of the community at the upcoming CentOS Connect[0] on January 31st and February 1st, then followed by FOSDEM[1] on February 2nd and 3rd in Brussels, BE. During Connect, there will be several RDO(Cloud) focused opportunities during the 2 days of Connect, including a morning CentOS Cloud SiG meetup, a presentation on running RDO on OKD, and a Cloud SiG update. At FOSDEM, there will be a shared stand(CentOS, RDO, and OKD) in bldg AW where you can chat with other members of the community and get some SWAG. Lastly, the OpenInfra Foundation will be holding a Happy Hour meetup[2] on Saturday night where you can meet members of the larger OpenStack and OpenInfra Communities. Hope to see you all there! And if you'd like to help out at the Stand please reach out as the signup is still in the works. Amy (spotz) 0 - https://connect.centos.org/ 1 - https://fosdem.org/2024/ 2 - https://www.meetup.com/brussels-openinfra-meetup-group/events/298420649

1 0

[all][ptl] proposed 2024.2 Dalmatian release cycle schedule
by Elõd Illés 19 Jan '24

19 Jan '24

Hi, As usually after Milestone-2, the release management team prepared the next release cycle schedule plan. Please (especially PTLs) have a look at the proposed 2024.2 Dalmatian release schedule [1] (<- this is the latest generated version of the schedule) and comment on the patch [2] if you have any thoughts. Thanks, Előd irc: elodilles @ #openstack-release [1]https://021d3a4791745da2ced8-a8caf4f4ad4b0a7f74dab21fc6a45bed.ssl.cf5.rac… [2] https://review.opendev.org/c/openstack/releases/+/906050

1 0

[neutron] Neutron drivers meeting
by Brian Haley 19 Jan '24

19 Jan '24

Hello Neutrinos, Please remember tomorrow (Friday) we have a Neutron drivers meeting. This is the agenda: https://wiki.openstack.org/wiki/Meetings/NeutronDrivers There are currently two topics: * (lajoskatona): quicky discuss the eventlet hell and what are the first steps: https://review.opendev.org/q/topic:bump-eventlet * (mtomaska): https://bugs.launchpad.net/neutron/+bug/2047849. [RFE] Start using oslo messaging namespaces https://review.opendev.org/c/openstack/neutron/+/905309 I realize there might be a couple of people out, if we do not have quorum will just postpone until next week. Thanks, -Brian

1 0

Problem with failing container-puppet-glance_api_internal during wallaby overcloud deploy.
by davorin.mikulic＠gmail.com 19 Jan '24

19 Jan '24

Hi, I have successfully deployed networks, vips, overcloud nodes and ceph cluster. Now I am proceeding with openstack overcloud deploy command as follows: openstack overcloud deploy --deployed-server --answers-file /home/stack/3XOenvironment/answers.yaml answers.yaml is as follows: (undercloud) [stack@uc4tb27 3XOenvironment]$ cat answers.yaml templates: /home/stack/generated-openstack-tripleo-heat-templates networks: /home/stack/3XOenvironment/40-network_data.yaml roles: /home/stack/3XOenvironment/30-roles_data.yaml environments: - /home/stack/3XOenvironment/deployed-server-environment.yaml - /home/stack/3XOenvironment/network-environment.yaml - /home/stack/3XOenvironment/overcloud-networks-deployed.yaml - /home/stack/3XOenvironment/overcloud-baremetal-deployed.yaml - /home/stack/3XOenvironment/deployed-vips.yaml - /home/stack/3XOenvironment/00-containers-prepare-parameter.yaml - /home/stack/3XOenvironment/10-docker-ha.yaml - /home/stack/3XOenvironment/cephadm.yaml - /home/stack/3XOenvironment/deployed-ceph.yaml We are not using a TLS setup anywhere in the overcloud or the undercloud. During the deploy, after the stack has been successfully created and deploy proceeds to puppet configuration of containers in step 1, I am getting the following error: 2024-01-17 09:30:39.360378 | 000c29b1-9f06-28d0-4abe-00000000d389 | TIMING | tripleo_container_manage : Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | overcloud-controller-1 | 0:18:04.150199 | 324.03s 2024-01-17 09:30:43.693815 | | WARNING | ERROR: Can't run container container-puppet-glance_api_internal stderr: + /usr/bin/puppet apply --summarize --detailed-exitcodes --color=false --modulepath=/etc/puppet/modules:/usr/share/openstack-puppet/modules --tags '"file,file_line,concat,augeas,cron,glance_api_config,glance_api_paste_ini,glance_swift_config,glance_cache_config,glance_image_import_config"' /etc/config.pp + logger -s -t puppet-user <13>Jan 17 08:25:20 puppet-user: Warning: /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It should be converted to version 5 <13>Jan 17 08:25:20 puppet-user: (file: /etc/puppet/hiera.yaml) <13>Jan 17 08:25:20 puppet-user: Warning: Undefined variable '::deploy_config_name'; <13>Jan 17 08:25:20 puppet-user: (file & line not available) <13>Jan 17 08:25:20 puppet-user: Warning: The function 'hiera' is deprecated in favor of using 'lookup'. See https://puppet.com/docs/puppet/7.6/deprecated_language.html <13>Jan 17 08:25:20 puppet-user: (file & line not available) <13>Jan 17 08:25:20 puppet-user: Error: Evaluation Error: Error while evaluating a Resource Statement, Class[Tripleo::Profile::Base::Glance::Api]: <13>Jan 17 08:25:20 puppet-user: has no parameter named 'bind_port' <13>Jan 17 08:25:20 puppet-user: has no parameter named 'log_file' <13>Jan 17 08:25:20 puppet-user: has no parameter named 'show_image_direct_url' <13>Jan 17 08:25:20 puppet-user: has no parameter named 'show_multiple_locations' (file: /etc/config.pp, line: 2, column: 1) on node overcloud-controller-2.tb27.cld + rc=1 + '[' false = false ']' + set +x 2024-01-17 09:30:43.695467 | 000c29b1-9f06-28d0-4abe-00000000d4d9 | FATAL | Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | overcloud-controller-2 | error={"changed": false, "msg": "Failed containers: container-puppet-glance_api_internal"} 2024-01-17 09:30:43.696471 | 000c29b1-9f06-28d0-4abe-00000000d4d9 | TIMING | tripleo_container_manage : Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | overcloud-controller-2 | 0:18:08.486292 | 323.73s PLAY RECAP ********************************************************************* localhost : ok=1 changed=0 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 overcloud-cephstorage-0 : ok=238 changed=96 unreachable=0 failed=0 skipped=135 rescued=0 ignored=1 overcloud-cephstorage-1 : ok=240 changed=96 unreachable=0 failed=0 skipped=130 rescued=0 ignored=1 overcloud-cephstorage-2 : ok=240 changed=96 unreachable=0 failed=0 skipped=130 rescued=0 ignored=1 overcloud-controller-0 : ok=295 changed=140 unreachable=0 failed=1 skipped=175 rescued=0 ignored=1 overcloud-controller-1 : ok=306 changed=140 unreachable=0 failed=1 skipped=164 rescued=0 ignored=1 overcloud-controller-2 : ok=306 changed=140 unreachable=0 failed=1 skipped=164 rescued=0 ignored=1 overcloud-novacompute-0 : ok=281 changed=132 unreachable=0 failed=0 skipped=165 rescued=0 ignored=1 overcloud-novacompute-1 : ok=288 changed=132 unreachable=0 failed=0 skipped=158 rescued=0 ignored=1 overcloud-novacompute-2 : ok=288 changed=132 unreachable=0 failed=0 skipped=158 rescued=0 ignored=1 undercloud : ok=25 changed=9 unreachable=0 failed=0 skipped=2 rescued=0 ignored=1 2024-01-17 09:30:43.764701 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Summary Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.765549 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Total Tasks: 1578 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.766211 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Elapsed Time: 0:18:08.556038 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.766837 | UUID | Info | Host | Task Name | Run Time 2024-01-17 09:30:43.767508 | 000c29b1-9f06-28d0-4abe-00000000d389 | SUMMARY | overcloud-controller-1 | tripleo_container_manage : Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | 324.03s 2024-01-17 09:30:43.768148 | 000c29b1-9f06-28d0-4abe-00000000d33c | SUMMARY | overcloud-controller-0 | tripleo_container_manage : Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | 323.73s 2024-01-17 09:30:43.768828 | 000c29b1-9f06-28d0-4abe-00000000d4d9 | SUMMARY | overcloud-controller-2 | tripleo_container_manage : Create containers managed by Podman for /var/lib/tripleo-config/container-puppet-config/step_1 | 323.73s 2024-01-17 09:30:43.769558 | 000c29b1-9f06-28d0-4abe-00000000b974 | SUMMARY | overcloud-novacompute-0 | Pre-fetch all the containers | 181.76s 2024-01-17 09:30:43.770215 | 000c29b1-9f06-28d0-4abe-00000000b9f7 | SUMMARY | overcloud-novacompute-1 | Pre-fetch all the containers | 175.41s 2024-01-17 09:30:43.770929 | 000c29b1-9f06-28d0-4abe-00000000ba70 | SUMMARY | overcloud-novacompute-2 | Pre-fetch all the containers | 169.84s 2024-01-17 09:30:43.771586 | 000c29b1-9f06-28d0-4abe-00000000c777 | SUMMARY | overcloud-controller-2 | Wait for puppet host configuration to finish | 133.41s 2024-01-17 09:30:43.772286 | 000c29b1-9f06-28d0-4abe-00000000c730 | SUMMARY | overcloud-controller-0 | Wait for puppet host configuration to finish | 133.31s 2024-01-17 09:30:43.773010 | 000c29b1-9f06-28d0-4abe-00000000c74d | SUMMARY | overcloud-controller-1 | Wait for puppet host configuration to finish | 133.30s 2024-01-17 09:30:43.773675 | 000c29b1-9f06-28d0-4abe-000000003b66 | SUMMARY | overcloud-controller-2 | Run puppet on the host to apply IPtables rules | 81.78s 2024-01-17 09:30:43.774343 | 000c29b1-9f06-28d0-4abe-000000003b66 | SUMMARY | overcloud-controller-0 | Run puppet on the host to apply IPtables rules | 80.99s 2024-01-17 09:30:43.774928 | 000c29b1-9f06-28d0-4abe-000000003b66 | SUMMARY | overcloud-controller-1 | Run puppet on the host to apply IPtables rules | 80.71s 2024-01-17 09:30:43.775545 | 000c29b1-9f06-28d0-4abe-00000000b7d8 | SUMMARY | overcloud-controller-0 | Pre-fetch all the containers | 80.65s 2024-01-17 09:30:43.776155 | 000c29b1-9f06-28d0-4abe-00000000b8fe | SUMMARY | overcloud-controller-2 | Pre-fetch all the containers | 80.21s 2024-01-17 09:30:43.776781 | 000c29b1-9f06-28d0-4abe-00000000b85e | SUMMARY | overcloud-controller-1 | Pre-fetch all the containers | 76.84s 2024-01-17 09:30:43.777443 | 000c29b1-9f06-28d0-4abe-00000000b58a | SUMMARY | undercloud | tripleo_container_image_prepare : Container image prepare | 66.95s 2024-01-17 09:30:43.778043 | 000c29b1-9f06-28d0-4abe-00000000b78c | SUMMARY | overcloud-controller-2 | tripleo_container_tag : Pull uc4tb27.ctlplane.tb27.cld:8787/tripleowallaby/openstack-cinder-volume:current-tripleo image | 42.81s 2024-01-17 09:30:43.778660 | 000c29b1-9f06-28d0-4abe-00000000c7ab | SUMMARY | overcloud-novacompute-2 | Wait for puppet host configuration to finish | 42.09s 2024-01-17 09:30:43.779285 | 000c29b1-9f06-28d0-4abe-00000000b78c | SUMMARY | overcloud-controller-1 | tripleo_container_tag : Pull uc4tb27.ctlplane.tb27.cld:8787/tripleowallaby/openstack-cinder-volume:current-tripleo image | 42.00s 2024-01-17 09:30:43.779870 | 000c29b1-9f06-28d0-4abe-00000000b78c | SUMMARY | overcloud-controller-0 | tripleo_container_tag : Pull uc4tb27.ctlplane.tb27.cld:8787/tripleowallaby/openstack-cinder-volume:current-tripleo image | 40.08s 2024-01-17 09:30:43.780470 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ End Summary Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.781183 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ State Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.781794 | ~~~~~~~~~~~~~~~~~~ Number of nodes which did not deploy successfully: 3 ~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:43.782388 | The following node(s) had failures: overcloud-controller-0, overcloud-controller-1, overcloud-controller-2 2024-01-17 09:30:43.783022 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-17 09:30:45.104 477248 INFO tripleoclient.utils.utils [-] Temporary directory [ /tmp/tripleo5qf1b220 ] cleaned up 2024-01-17 09:30:45.104 477248 ERROR tripleoclient.utils.utils [-] Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh 2024-01-17 09:30:45.105 477248 WARNING tripleoclient.utils.safe_write [-] The output file /home/stack/overcloud-deploy/overcloud/overcloud-deployment_status.yaml will be overriden: RuntimeError: Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh Host 10.100.27.127 not found in /home/stack/.ssh/known_hosts Overcloud Endpoint: http://10.100.27.127:5000 Overcloud Horizon Dashboard URL: http://10.100.27.127:80/dashboard Overcloud rc file: /home/stack/overcloud-deploy/overcloud/overcloudrc and /home/stack/overcloudrc Overcloud Deployed with error 2024-01-17 09:30:45.793 477248 INFO tripleoclient.v1.overcloud_deploy.DeployOvercloud [-] Stopping ephemeral heat. 2024-01-17 09:30:45.863 477248 INFO tripleoclient.heat_launcher [-] Pod does not exist: ephemeral-heat 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud [-] Exception occured while running the command: RuntimeError: Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud Traceback (most recent call last): 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/command.py", line 32, in run 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud super(Command, self).run(parsed_args) 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/osc_lib/command/command.py", line 39, in run 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud return super(Command, self).run(parsed_args) 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/cliff/command.py", line 185, in run 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud return_code = self.take_action(parsed_args) or 0 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/v1/overcloud_deploy.py", line 1334, in take_action 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud working_dir=self.working_dir) 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/oslo_utils/excutils.py", line 227, in __exit__ 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud self.force_reraise() 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/oslo_utils/excutils.py", line 200, in force_reraise 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud raise self.value 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/v1/overcloud_deploy.py", line 1322, in take_action 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud 'BlacklistedHostnames', self.working_dir)) 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/workflows/deployment.py", line 405, in config_download 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud forks=forks 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/utils.py", line 775, in run_ansible_playbook 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud raise RuntimeError(err_msg) 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud RuntimeError: Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh 2024-01-17 09:30:47.952 477248 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud 2024-01-17 09:30:47.967 477248 ERROR openstack [-] Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh: RuntimeError: Ansible execution failed. playbook: /home/stack/overcloud-deploy/overcloud/config-download/overcloud/deploy_steps_playbook.yaml, Run Status: failed, Return Code: 2, To rerun the failed command manually execute the following script: /home/stack/overcloud-deploy/overcloud/config-download/ansible-playbook-command.sh 2024-01-17 09:30:47.971 477248 INFO osc_lib.shell [-] END return value: 1 If I list logs on the failing container and open the /etc/config.pp file I can see that bind_port, log_file, show_image_direct_url and show_multiple_locations are successfully read but it seems they are not defined for specified class. [root@overcloud-controller-0 ~]# podman logs f319ca15fd60 include ::tripleo::packages class { 'tripleo::profile::base::glance::api': bind_port => 9293, tls_proxy_port => 9293, log_file => '/var/log/glance/api_internal.log', show_image_direct_url => true, show_multiple_locations => true, } include tripleo::profile::base::database::mysql::client Running puppet + /usr/bin/puppet apply --summarize --detailed-exitcodes --color=false --modulepath=/etc/puppet/modules:/usr/share/openstack-puppet/modules --tags '"file,file_line,concat,augeas,cron,glance_api_config,glance_api_paste_ini,glance_swift_config,glance_cache_config,glance_image_import_config"' /etc/config.pp + logger -s -t puppet-user <13>Jan 17 08:25:15 puppet-user: Warning: /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It should be converted to version 5 <13>Jan 17 08:25:15 puppet-user: (file: /etc/puppet/hiera.yaml) <13>Jan 17 08:25:15 puppet-user: Warning: Undefined variable '::deploy_config_name'; <13>Jan 17 08:25:15 puppet-user: (file & line not available) <13>Jan 17 08:25:15 puppet-user: Warning: The function 'hiera' is deprecated in favor of using 'lookup'. See https://puppet.com/docs/puppet/7.6/deprecated_language.html <13>Jan 17 08:25:15 puppet-user: (file & line not available) <13>Jan 17 08:25:15 puppet-user: Error: Evaluation Error: Error while evaluating a Resource Statement, Class[Tripleo::Profile::Base::Glance::Api]: <13>Jan 17 08:25:15 puppet-user: has no parameter named 'bind_port' <13>Jan 17 08:25:15 puppet-user: has no parameter named 'log_file' <13>Jan 17 08:25:15 puppet-user: has no parameter named 'show_image_direct_url' <13>Jan 17 08:25:15 puppet-user: has no parameter named 'show_multiple_locations' (file: /etc/config.pp, line: 2, column: 1) on node overcloud-controller-0.tb27.cld + rc=1 + '[' false = false ']' + set +x include ::tripleo::packages class { 'tripleo::profile::base::glance::api': bind_port => 9293, tls_proxy_port => 9293, log_file => '/var/log/glance/api_internal.log', show_image_direct_url => true, show_multiple_locations => true, } include tripleo::profile::base::database::mysql::client Running puppet + /usr/bin/puppet apply --summarize --detailed-exitcodes --color=false --modulepath=/etc/puppet/modules:/usr/share/openstack-puppet/modules --tags '"file,file_line,concat,augeas,cron,glance_api_config,glance_api_paste_ini,glance_swift_config,glance_cache_config,glance_image_import_config"' /etc/config.pp + logger -s -t puppet-user <13>Jan 17 09:19:13 puppet-user: Warning: /etc/puppet/hiera.yaml: Use of 'hiera.yaml' version 3 is deprecated. It should be converted to version 5 <13>Jan 17 09:19:13 puppet-user: (file: /etc/puppet/hiera.yaml) <13>Jan 17 09:19:13 puppet-user: Warning: Undefined variable '::deploy_config_name'; <13>Jan 17 09:19:13 puppet-user: (file & line not available) <13>Jan 17 09:19:13 puppet-user: Warning: The function 'hiera' is deprecated in favor of using 'lookup'. See https://puppet.com/docs/puppet/7.6/deprecated_language.html <13>Jan 17 09:19:13 puppet-user: (file & line not available) <13>Jan 17 09:19:13 puppet-user: Error: Evaluation Error: Error while evaluating a Resource Statement, Class[Tripleo::Profile::Base::Glance::Api]: <13>Jan 17 09:19:13 puppet-user: has no parameter named 'bind_port' <13>Jan 17 09:19:13 puppet-user: has no parameter named 'log_file' <13>Jan 17 09:19:13 puppet-user: has no parameter named 'show_image_direct_url' <13>Jan 17 09:19:13 puppet-user: has no parameter named 'show_multiple_locations' (file: /etc/config.pp, line: 2, column: 1) on node overcloud-controller-0.tb27.cld + rc=1 + '[' false = false ']' + set +x Also the content of config.pp is as follows: include ::tripleo::packages class { 'tripleo::profile::base::glance::api': bind_port => 9293, tls_proxy_port => 9293, log_file => '/var/log/glance/api_internal.log', show_image_direct_url => true, show_multiple_locations => true, } include tripleo::profile::base::database::mysql::client Does anyone know what is the issue here?

2 2

[puppet][sahara] Retiring puppet-sahara
by Takashi Kajinami 19 Jan '24

19 Jan '24

Hello, As you may know, the sahara project was marked inactive during this cycle. In Puppet OpenStack project we have maintained the puppet-sahara module to deploy and manage sahara deployments. We haven't seen any feedback from actual users for a while and I doubt anyone is actually using it. # AFAIK all of the recent updates are common maintenance works. I've updated # the module to improve parameter support coverage but I've never used sahara # by myself. Based on the situation, I propose retiring this module. In case you have any concern (though in that case the concern should be directed to the sahara project itself), please let me know. Unless I hear any objections or improvements about sahara's status, I'll start the retirement process after milestone 3 (Week of Feb 26). Thank you, Takashi Kajinami irc: tkajinam

2 1

help with multiattach volume type in [cinder]
by Shubham Kumar Yadav 18 Jan '24

18 Jan '24

Hi, i have a question/issue related to multiattach feature in cinder i have an openstack cluster and i have configured multiattach in the openstack cinder now when i create 1 volume (with volume type multiattach) and attach it to 2 instances test1 and test2 on test1 sudo mkfs -t ext4 /dev/sdb sudo mkdir /mnt/mydisk sudo mount /dev/sdb /mnt/mydisk touch /mnt/mydisk/shared_file echo "This is some shared content" | sudo tee /mnt/mydisk/shared_file on test2 sudo mkdir /mnt/mydisk sudo mount /dev/sdb /mnt/mydisk ls /mnt/mydisk/ cat /mnt/mydisk/shared_file i can see the shared_file now when i add new files on test1 im not able to see it on test2 untill i unmount the volume with directory and mount the directory again to the volume on test2. what could be the solution for it? how can i make the volume share datas instantly between all the instances connected to the volume i have tried with ext4 and xfs file system Hope to hear from you soon Thank you!

2 1

Problem with deploying deployed ceph in OS wallaby.
by davorin.mikulic＠gmail.com 17 Jan '24

17 Jan '24

Hello. I have a problem deploying ceph cluster prior to deploying OS with the following command. openstack overcloud ceph deploy -o /home/stack/3XOenvironment/deployed-ceph.yaml --stack overcloud --roles-data /home/stack/3XOenvironment/30-roles_data.yaml --network-data /home/stack/3XOenvironment/40-network_data.yaml --config /home/stack/3XOenvironment/ceph.conf --ntp-server 10.100.250.101 --container-image-prepare /home/stack/3XOenvironment/00-containers-prepare-parameter.yaml /home/stack/3XOenvironment/overcloud-baremetal-deployed.yaml -vvv I have successfully provisioned overcloud networks, vips and nodes (HPE GEN 9 machines). Ceph clusters seems to create but it fails on creating the environment file (deployed-ceph.yaml) for the openstack overcloud deploy command. The error involves tld_option which I cannot find anywhere. 2024-01-16 11:29:06.616835 | 000c29b1-9f06-81af-0614-00000000011b | TASK | Ceph cluster status 2024-01-16 11:29:06.654033 | 000c29b1-9f06-81af-0614-00000000011b | OK | Ceph cluster status | overcloud-controller-0 | result={ "changed": false, "msg": [ " cluster:", " id: 472da67d-c46c-5717-880e-574b9105d723", " health: HEALTH_OK", " ", " services:", " mon: 3 daemons, quorum overcloud-controller-0,overcloud-controller-2,overcloud-controller-1 (age 25m)", " mgr: overcloud-controller-0.ewcaqz(active, since 26m), standbys: overcloud-controller-2.gaxwws, overcloud-controller-1.muacne", " osd: 3 osds: 3 up (since 23m), 3 in (since 24m)", " ", " data:", " pools: 1 pools, 1 pgs", " objects: 0 objects, 0 B", " usage: 14 MiB used, 22 TiB / 22 TiB avail", " pgs: 1 active+clean", " " ] } 2024-01-16 11:29:06.655731 | 000c29b1-9f06-81af-0614-00000000011b | TIMING | tripleo_cephadm : Ceph cluster status | overcloud-controller-0 | 0:00:45.445615 | 0.04s 2024-01-16 11:29:06.668350 | 000c29b1-9f06-81af-0614-000000000131 | TASK | Create Deployed Ceph Heat Environment file to pass to overcloud deploy <localhost> ESTABLISH LOCAL CONNECTION FOR USER: stack <localhost> EXEC /bin/sh -c 'echo ~stack && sleep 0' <localhost> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo /home/stack/.ansible/tmp `"&& mkdir "` echo /home/stack/.ansible/tmp/ansible-tmp-1705400946.7091644-595040-96765848827570 `" && echo ansible-tmp-1705400946.7091644-595040-96765848827570="` echo /home/stack/.ansible/tmp/ansible-tmp-1705400946.7091644-595040-96765848827570 `" ) && sleep 0' <localhost> EXEC /bin/sh -c 'rm -f -r /home/stack/.ansible/tmp/ansible-tmp-1705400946.7091644-595040-96765848827570/ > /dev/null 2>&1 && sleep 0' 2024-01-16 11:29:06.768346 | 000c29b1-9f06-81af-0614-000000000131 | FATAL | Create Deployed Ceph Heat Environment file to pass to overcloud deploy | overcloud-controller-0 -> localhost | error={ "changed": false, "msg": "AnsibleUndefinedVariable: {{ tld_option }}: 'tld_option' is undefined" } [WARNING]: ('overcloud-controller-0 -> localhost', '000c29b1-9f06-81af-0614-000000000131') missing from stats PLAY RECAP ********************************************************************* overcloud-controller-0 : ok=37 changed=8 unreachable=0 failed=1 skipped=43 rescued=0 ignored=1 undercloud : ok=10 changed=3 unreachable=0 failed=0 skipped=10 rescued=0 ignored=0 2024-01-16 11:29:06.777893 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Summary Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.778573 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Total Tasks: 102 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.779338 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Elapsed Time: 0:00:45.569227 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.780170 | UUID | Info | Host | Task Name | Run Time 2024-01-16 11:29:06.781078 | 000c29b1-9f06-81af-0614-000000000187 | SUMMARY | undercloud | tripleo_run_cephadm : Run ceph-admin-user-playbook for public and private keys | 7.36s 2024-01-16 11:29:06.781746 | 000c29b1-9f06-81af-0614-000000000188 | SUMMARY | undercloud | tripleo_run_cephadm : Run ceph-admin-user-playbook for public keys | 6.19s 2024-01-16 11:29:06.782621 | 000c29b1-9f06-81af-0614-00000000009b | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Set public/cluster network and v4/v6 ms_bind unless already in ceph.conf | 4.41s 2024-01-16 11:29:06.783807 | 000c29b1-9f06-81af-0614-0000000000b2 | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Apply spec | 3.20s 2024-01-16 11:29:06.784945 | 000c29b1-9f06-81af-0614-00000000002d | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Install cephadm package | 3.19s 2024-01-16 11:29:06.785972 | 000c29b1-9f06-81af-0614-0000000002fb | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Wait for expected number of osds to be running | 1.27s 2024-01-16 11:29:06.786740 | 000c29b1-9f06-81af-0614-000000000118 | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Show the deployed daemons | 1.21s 2024-01-16 11:29:06.787585 | 000c29b1-9f06-81af-0614-00000000011a | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Print the status of the deployed Ceph cluster | 1.21s 2024-01-16 11:29:06.788369 | 000c29b1-9f06-81af-0614-000000000115 | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Get the ceph orchestrator status | 1.16s 2024-01-16 11:29:06.789142 | 000c29b1-9f06-81af-0614-00000000029f | SUMMARY | overcloud-controller-0 | tripleo_cephadm : set container image base in ceph configuration | 1.12s 2024-01-16 11:29:06.789892 | 000c29b1-9f06-81af-0614-0000000000af | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Get the ceph orchestrator status | 1.11s 2024-01-16 11:29:06.790586 | 000c29b1-9f06-81af-0614-00000000003b | SUMMARY | overcloud-controller-0 | push tripleo_cephadm_spec to bootstrap node if spec file exsits | 0.89s 2024-01-16 11:29:06.791367 | 000c29b1-9f06-81af-0614-000000000184 | SUMMARY | undercloud | tripleo_run_cephadm : Populate cephadm_admin_limit_file | 0.81s 2024-01-16 11:29:06.792182 | 000c29b1-9f06-81af-0614-000000000030 | SUMMARY | overcloud-controller-0 | tripleo_cephadm : List Ceph daemon instances on this host | 0.69s 2024-01-16 11:29:06.792987 | 000c29b1-9f06-81af-0614-000000000019 | SUMMARY | undercloud | Create Ceph spec based on baremetal_deployed_path and tripleo_roles | 0.68s 2024-01-16 11:29:06.793962 | 000c29b1-9f06-81af-0614-00000000003e | SUMMARY | overcloud-controller-0 | push it to tripleo_cephadm_assimilate_conf on bootstrap node | 0.66s 2024-01-16 11:29:06.794719 | 000c29b1-9f06-81af-0614-000000000185 | SUMMARY | undercloud | tripleo_run_cephadm : Populate cephadm_non_admin_limit_file | 0.59s 2024-01-16 11:29:06.795418 | 000c29b1-9f06-81af-0614-00000000006e | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Stat necessary files to bootstrap with cephadm | 0.56s 2024-01-16 11:29:06.796092 | 000c29b1-9f06-81af-0614-00000000002e | SUMMARY | overcloud-controller-0 | tripleo_cephadm : Stat cephadm file | 0.37s 2024-01-16 11:29:06.796735 | 000c29b1-9f06-81af-0614-000000000038 | SUMMARY | overcloud-controller-0 | Ensure tripleo_cephadm_config_home (e.g. /etc/ceph) exists | 0.37s 2024-01-16 11:29:06.797373 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ End Summary Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.798022 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ State Information ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.798652 | ~~~~~~~~~~~~~~~~~~ Number of nodes which did not deploy successfully: 1 ~~~~~~~~~~~~~~~~~ 2024-01-16 11:29:06.799383 | The following node(s) had failures: overcloud-controller-0 2024-01-16 11:29:06.800015 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Temporary directory [ /tmp/tripleozr0mivzo ] cleaned up Ansible execution failed. playbook: /usr/share/ansible/tripleo-playbooks/cli-deployed-ceph.yaml, Run Status: failed, Return Code: 2 Temporary directory [ /tmp/tripleo9zw51ssj ] cleaned up Exception occured while running the command Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/tripleoclient/command.py", line 32, in run super(Command, self).run(parsed_args) File "/usr/lib/python3.6/site-packages/osc_lib/command/command.py", line 39, in run return super(Command, self).run(parsed_args) File "/usr/lib/python3.6/site-packages/cliff/command.py", line 185, in run return_code = self.take_action(parsed_args) or 0 File "/usr/lib/python3.6/site-packages/tripleoclient/v2/overcloud_ceph.py", line 739, in take_action skip_tags=','.join(skip_tags), File "/usr/lib/python3.6/site-packages/tripleoclient/utils.py", line 775, in run_ansible_playbook raise RuntimeError(err_msg) RuntimeError: Ansible execution failed. playbook: /usr/share/ansible/tripleo-playbooks/cli-deployed-ceph.yaml, Run Status: failed, Return Code: 2 Ansible execution failed. playbook: /usr/share/ansible/tripleo-playbooks/cli-deployed-ceph.yaml, Run Status: failed, Return Code: 2 clean_up OvercloudCephDeploy: Ansible execution failed. playbook: /usr/share/ansible/tripleo-playbooks/cli-deployed-ceph.yaml, Run Status: failed, Return Code: 2 END return value: 1

2 2

[heat] Propose retirement of heat-cfnclient
by Takashi Kajinami 17 Jan '24

17 Jan '24

Hello, In heat project, we have had the heat-cfnclient library which contains the client utilities to consume AWS-compatible APIs in heat. However this repository is not properly maintained and I doubt that anyone is using (or even can use) it with recent Heat. - The repository still contains the utility for CloudWatch API which was already removed from heat - The heat-cfn command relies on Keystone v2 instead of v3 - No release has been made since the repository was created Based on the current situation I'd propose retiring the repository. I'd appreciate any feedback and if I hear no objections then I'll start the official process to retire the repository. Thank you, Takashi

2 3

[kolla-ansible][Antelope][Senlin] Senlin Rolling Updates Not Working
by Devin Patterson 17 Jan '24

17 Jan '24

Hello, We have deployed Senlin clusters to manage VM health. When attempting to do rolling updates of VMs by updating the profile, the VMs go into an error state with the following error in the senlin engine logs. I've included the Heat template and OS commands. Any help would be appreciated. openstack cluster update --profile <new_profile> <senlin_cluster> cluster event show <event_d> status_reason | Failed in updating nodes. heat_template_version: 2021-04-16 description: OpenStack Heat template to deploy a Senlin autoscaling group resources: profile1: type: OS::Senlin::Profile properties: type: os.nova.server-1.0 properties: flavor: m1.small image: cirros-0.5.1 key_name: keypair networks: - network: network user_data: | #!/bin/sh echo 'hello, world' > /tmp/test_file batch_policy: type: OS::Senlin::Policy properties: type: senlin.policy.batch-1.0 bindings: - cluster: {get_resource: cluster} properties: min_in_service: 1 max_batch_size: 2 pause_time: 3 cluster: type: OS::Senlin::Cluster properties: desired_capacity: 8 min_size: 2 profile: { get_resource: profile1 } receiver_scale_out: type: OS::Senlin::Receiver properties: cluster: {get_resource: cluster} action: CLUSTER_SCALE_OUT type: webhook receiver_scale_in: type: OS::Senlin::Receiver properties: cluster: {get_resource: cluster} action: CLUSTER_SCALE_IN type: webhook outputs: receiver_scale_out: description: Webhook to scale out cluster. value: str_replace: template: curl -X POST LINK params: LINK: {get_attr: [receiver_scale_out, channel, alarm_url]} receiver_scale_in: description: Webhook to scale in cluster. value: str_replace: template: curl -X POST LINK params: LINK: {get_attr: [receiver_scale_in, channel, alarm_url]} Regards, Devin

1 0

[kolla-ansible][Antelope][Heat] Heat Autoscaling Scaling Policy URL
by Devin Patterson 17 Jan '24

17 Jan '24

Hello, I am attempting to create an auto-scaling group with Heat. The group is deployed properly along with scale up and scale down policies. When attempting to curl with POST, I get the following response. This is using the "alarm_url" from the scaling policy. Below is also the Heat template being utilized. Below the error response is the curl command. Wondering why there is an AWSAccessKeyId in the signature of the URL as well. <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>500 Internal Server Error</title> </head><body> <h1>Internal Server Error</h1> <p>The server encountered an internal error or misconfiguration and was unable to complete your request.</p> <p>Please contact the server administrator at [no address given] to inform them of the time this error occurred, and the actions you performed just before this error.</p> <p>More information about this error may be available in the server error log.</p> </body></html> CURL COMMAND: curl -X POST <external-os-url>/v1/signal/arn%3Aopenstack%3Aheat%3A%omitted3Astacks/stack_1/omitted/resources/scale_down_policy\?SignatureMethod\=HmacSHA256\&SignatureVersion\=2\&AWSAccessKeyId\=omitted\&Signature\=omitted TEMPLATE: heat_template_version: 2021-04-16 description: OpenStack Heat template to deploy a autoscaling group resources: asg: type: OS::Heat::AutoScalingGroup properties: desired_capacity: 6 max_size: 8 min_size: 2 rolling_updates: min_in_service: 1 max_batch_size: 2 pause_time: 3 resource: type: OS::Nova::Server properties: flavor: m1.small image: image key_name: my-keypair networks: - network: network user_data: | #!/bin/sh echo 'hello, world123' > /tmp/test_file scale_up_policy: type: OS::Heat::ScalingPolicy properties: adjustment_type: change_in_capacity auto_scaling_group_id: { get_resource: asg } cooldown: 60 scaling_adjustment: 1 scale_down_policy: type: OS::Heat::ScalingPolicy properties: adjustment_type: change_in_capacity auto_scaling_group_id: { get_resource: asg } cooldown: 60 scaling_adjustment: -1 outputs: scale_up_url: description: > This URL is the webhook to scale up the group. You can invoke the scale-up operation by doing an HTTP POST to this URL; no body nor extra headers are needed. value: {get_attr: [scale_up_policy, alarm_url]} scale_dn_url: description: > This URL is the webhook to scale down the group. You can invoke the scale-down operation by doing an HTTP POST to this URL; no body nor extra headers are needed. value: {get_attr: [scale_down_policy, alarm_url]} asg_size: description: > This is the current size of the auto scaling group. value: {get_attr: [asg, current_size]} server_list: description: > This is a list of server names that are part of the group. value: {get_attr: [asg, outputs_list, name]} networks: description: > This is a map of server resources and their networks. value: {get_attr: [asg, outputs, networks]} server_ips: description: > This is a list of first ip addresses of the servers in the group for a specified network. value: {get_attr: [asg, outputs_list, networks, {get_param: network}, 0]} Regards, Devin

1 0

[magnum] k8s-keystone-auth pod CrashLoopBackOff
by Eugen Block 16 Jan '24

16 Jan '24

Hi there, I've noticed several magnum related threads and thought I'd give it a try while I keep digging. I've only recently started to work with magnum, and this is how far I get. Note that this openstack is still running on version Victoria, I'm working towards migrating it to a newer release. My coe cluster template currently looks like this (I'll omit the defaults): | labels | {'kube_tag': 'v1.18.2', 'hyperkube_prefix': 'k8s.gcr.io/'} | | https_proxy | http://<IP>:<PORT> | | http_proxy | http://<IP>:<PORT> | | image_id | fedora-coreos33 | | dns_nameserver | <MY_DNS> | I've already tried quite a lot of different kube_tags and hyperkube_prefixes, this combination gets me at least to have some running containers: [root@kubernetes-cluster20-buuxqog6cfnn-master-0 ~]# podman ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 7fbe3f8f308f docker.io/openstackmagnum/heat-container-agent:victoria-stable-1 /usr/bin/start-he... 42 minutes ago Up 42 minutes ago heat-container-agent a8b6ae357034 k8s.gcr.io/hyperkube:v1.18.2 kube-apiserver --... 40 minutes ago Up 40 minutes ago kube-apiserver cb7774fbf849 k8s.gcr.io/hyperkube:v1.18.2 kube-controller-m... 40 minutes ago Up 40 minutes ago kube-controller-manager 448f1c02cbd4 k8s.gcr.io/hyperkube:v1.18.2 kube-scheduler --... 40 minutes ago Up 40 minutes ago kube-scheduler 4be28a0a2271 k8s.gcr.io/hyperkube:v1.18.2 kubelet --logtost... 40 minutes ago Up 40 minutes ago kubelet 542ffdb081e7 k8s.gcr.io/hyperkube:v1.18.2 kube-proxy --logt... 40 minutes ago Up 40 minutes ago kube-proxy 61874a4e4595 quay.io/coreos/etcd:v3.4.6 /usr/local/bin/et... 40 minutes ago Up 40 minutes ago etcd But not all pods are starting: [root@kubernetes-cluster20-buuxqog6cfnn-master-0 ~]# /var/srv/magnum/bin/kubectl get pods -o wide --kubeconfig=/etc/kubernetes/admin.conf -A NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES kube-system coredns-786ffb7797-dpkbx 1/1 Running 0 25m 10.100.0.3 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system coredns-786ffb7797-mslfk 1/1 Running 0 25m 10.100.0.2 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system dashboard-metrics-scraper-6b4884c9d5-nrvbg 1/1 Running 0 25m 10.100.0.5 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system k8s-keystone-auth-qt7n5 0/1 CrashLoopBackOff 4 5m12s 10.0.0.116 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system kube-dns-autoscaler-75859754fd-69zxx 0/1 Pending 0 25m <none> <none> <none> <none> kube-system kube-flannel-ds-cn5jf 1/1 Running 0 25m 10.0.0.116 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system kubernetes-dashboard-c98496485-qw4hl 1/1 Running 0 25m 10.100.0.4 kubernetes-cluster20-buuxqog6cfnn-master-0 <none> <none> kube-system magnum-metrics-server-79556d6999-hkqcw 0/1 Pending 0 25m <none> <none> <none> <none> I didn't look too deep into the two other failing pods, I think the keystone pod is more important at this point or maybe even is required for the other pods to start, I don't know yet. I can pull the image manually and the "describe pod" command also shows that the container was pulled successfully, but I can't find other hints what is actually failing. Here is the full output of "describe pod": ---snip--- [root@kubernetes-cluster20-buuxqog6cfnn-master-0 ~]# /var/srv/magnum/bin/kubectl --kubeconfig=/etc/kubernetes/admin.conf -n kube-system describe pod/k8s-keystone-auth-qt7n5 Name: k8s-keystone-auth-qt7n5 Namespace: kube-system Priority: 0 Node: kubernetes-cluster20-buuxqog6cfnn-master-0/10.0.0.116 Start Time: Mon, 15 Jan 2024 09:13:16 +0000 Labels: controller-revision-hash=6875f96b46 k8s-app=k8s-keystone-auth pod-template-generation=1 Annotations: kubernetes.io/psp: magnum.privileged Status: Running IP: 10.0.0.116 IPs: IP: 10.0.0.116 Controlled By: DaemonSet/k8s-keystone-auth Containers: k8s-keystone-auth: Container ID: docker://adca0b9a9eb011f22530886a42bf862b4cfa7e6b7965cd77d6dac4f37222b827 Image: docker.io/k8scloudprovider/k8s-keystone-auth:v1.18.0 Image ID: docker-pullable://k8scloudprovider/k8s-keystone-auth@sha256:ab72a7e5b9eca9af2762796690be800bce2de25dee8bd5ad55d0996b29c85146 Port: 8443/TCP Host Port: 8443/TCP Args: ./bin/k8s-keystone-auth --tls-cert-file /etc/kubernetes/certs/server.crt --tls-private-key-file /etc/kubernetes/certs/server.key --policy-configmap-name k8s-keystone-auth-policy --keystone-url http://<CONTROLLER>:5000/v3 --sync-configmap-name keystone-sync-policy --keystone-ca-file /etc/kubernetes/ca-bundle.crt --listen 127.0.0.1:8443 State: Terminated Reason: Error Exit Code: 1 Started: Mon, 15 Jan 2024 09:23:52 +0000 Finished: Mon, 15 Jan 2024 09:23:52 +0000 Last State: Terminated Reason: Error Exit Code: 1 Started: Mon, 15 Jan 2024 09:18:41 +0000 Finished: Mon, 15 Jan 2024 09:18:41 +0000 Ready: False Restart Count: 6 Requests: cpu: 200m Environment: <none> Mounts: /etc/kubernetes from ca-certs (ro) /etc/kubernetes/certs from k8s-certs (ro) /var/run/secrets/kubernetes.io/serviceaccount from k8s-keystone-auth-token-vhm4r (ro) Conditions: Type Status Initialized True Ready False ContainersReady False PodScheduled True Volumes: k8s-certs: Type: HostPath (bare host directory volume) Path: /etc/kubernetes/certs HostPathType: DirectoryOrCreate ca-certs: Type: HostPath (bare host directory volume) Path: /etc/kubernetes HostPathType: DirectoryOrCreate k8s-keystone-auth-token-vhm4r: Type: Secret (a volume populated by a Secret) SecretName: k8s-keystone-auth-token-vhm4r Optional: false QoS Class: Burstable Node-Selectors: node-role.kubernetes.io/master= Tolerations: :NoSchedule :NoExecute CriticalAddonsOnly node.kubernetes.io/disk-pressure:NoSchedule node.kubernetes.io/memory-pressure:NoSchedule node.kubernetes.io/network-unavailable:NoSchedule node.kubernetes.io/not-ready:NoExecute node.kubernetes.io/pid-pressure:NoSchedule node.kubernetes.io/unreachable:NoExecute node.kubernetes.io/unschedulable:NoSchedule Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal Scheduled <unknown> default-scheduler Successfully assigned kube-system/k8s-keystone-auth-qt7n5 to kubernetes-cluster20-buuxqog6cfnn-master-0 Warning Failed 9m52s kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Error: ErrImagePull Warning Failed 9m52s kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Failed to pull image "docker.io/k8scloudprovider/k8s-keystone-auth:v1.18.0": rpc error: code = Unknown desc = Get "https://registry-1.docker.io/v2/k8scloudprovider/k8s-keystone-auth/manifest…": Internal Server Error Normal Pulling 9m37s (x5 over 10m) kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Pulling image "docker.io/k8scloudprovider/k8s-keystone-auth:v1.18.0" Normal Pulled 9m36s (x4 over 10m) kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Successfully pulled image "docker.io/k8scloudprovider/k8s-keystone-auth:v1.18.0" Normal Created 9m35s (x4 over 10m) kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Created container k8s-keystone-auth Normal Started 9m35s (x4 over 10m) kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Started container k8s-keystone-auth Warning BackOff 33s (x48 over 10m) kubelet, kubernetes-cluster20-buuxqog6cfnn-master-0 Back-off restarting failed container ---snip--- I'm obviously not allowed to get logs from the pod: [root@kubernetes-cluster20-buuxqog6cfnn-master-0 ~]# /var/srv/magnum/bin/kubectl --kubeconfig=/etc/kubernetes/admin.conf -n kube-system logs pod/k8s-keystone-auth-qt7n5 Error from server: Get https://10.0.0.116:10250/containerLogs/kube-system/k8s-keystone-auth-qt7n5/…: Forbidden I appreciate any hints! Thanks! Eugen

1 3

[keystone] Keystone as a Service Provider, 401 - Unauthorized Exception for SSO
by joeldag7＠gmail.com 16 Jan '24

16 Jan '24

We're currently working on implementing SSO for our university's OpenStack environment using OpenStack Ansible (Yoga version). Our goal is to allow students to log in with their university credentials via an Identity Provider - currently we're using our own Keycloak instance as IdP. The plan is to automatically create a new project for first time users, while returning students will be redirected to their existing projects to manage their instances. For initial testing, we're directing all users to a single project. Eventually, we would like to script the dynamic creation of projects on the controller node for first-time logins later. However, we've run into some problems: Our Keystone configuration in the user_variables.yml file is as follows: ``` keystone_sp: apache_mod: 'mod_auth_openidc' cadf_notifications: true trusted_dashboard_list: - "https://openstack-example.com/auth/websso/" - "http://example.keycloak.com/realms/openstack*" - "https://openstack-example.com/auth/login/" trusted_idp_list: - name: "oidc-idp" oidc_provider_metadata_url: http://example.keycloak.com/realms/openstack/.well-known/openid-configurati… oidc_client_id: ******** oidc_client_secret: ********* oidc_crypto_passphrase: ****** oidc_redirect_uri: https://openstack-example.com/v3/OS-FEDERATION/identity_providers/oidc-idp/… entity_ids: - 'http://exmaple.keycloak.com/realms/openstack' federated_identities: - domain: default project: fedproject group: fedgroup role: member protocols: - name: openid mapping: name: openid-mapping rules: - remote: - type: email local: - group: name: fedgroup domain: name: Default user: name: '{0}' ``` This setup is based on the openstack documentation (https://docs.openstack.org/openstack-ansible-os_keystone/yoga/configure-fed…) After many attempts with different configurations, this one successfully redirects to our Keycloak IdP for authentication. However, after login, when redirected back to OpenStack, we get a 401 Unauthorised error stating "The request you have made requires authentication". The SAML tracer logs confirm that Keycloak issues a valid token along with the user information. Despite this, we find no additional error details in the Keystone container, Apache2 and controller logs. This leads me to believe that the problem may lie in the mapping configuration, although it appears to work when tested with the keystone-manage mapping-engine tool. But still, the doc (https://docs.openstack.org/keystone/queens/advanced-topics/federation/mappi…) claims that a 401 exception could be caused by the mapping. Any insight or suggestions on how to solve this problem would be greatly appreciated, particularly regarding the mapping process during authentication. I'm also looking for advice on how to extract more detailed error information. At the moment, the logs don't reveal much beyond the 401 error message. Am I missing something or is this all the information OpenStack typically provides in such cases? Thank you for your help and guidance.

1 0

OpenStack D Release Name
by Allison Price 16 Jan '24

16 Jan '24

Hi everyone, I am excited to share that the name for the OpenStack D release, scheduled for 2H 2024 is Dalmatian. (Congrats, Amy!) We look forward to developing the 30th release of OpenStack! Cheers, Allison

4 3

[tc] Next Technical Committee Meeting Jan 16 2024, 1800 UTC
by Jay Faulkner 16 Jan '24

16 Jan '24

Hi all, The next weekly OpenStack Technical Committee meeting is tomorrow, Tuesday Jan 16 at 1800 UTC in #openstack-tc on OFTC. The proposed agenda is: Agenda - Roll call - Follow up on tracked action items - JayF - Email mailing list a summary of the discussion around Monasca, highlighting issues around trust and project activity along with a link to the meeting log. - slaweq - Reach out privately to volunteer to maintain Monasca about official vs unofficial options - gmann - Reach out privately to volunteer to maintain Senlin about next steps - Gate health check - Implementation of Unmaintained branch statuses - Inactive projects for Caracal - It is past C-2, these projects will not be in Caracal release. Would we like to take further action in Caracal? - Monasca - Senlin - Freezer - Solum - EC2 API - Sahara - 2024.1 TC Tracker - https://etherpad.opendev.org/p/tc-2024.1-tracker - Open Discussion and Reviews Thanks, Jay Faulkner

1 0

[neutron] Bug deputy - week of Jan 8
by Sławek Kapłoński 16 Jan '24

16 Jan '24

Hi, It was pretty quiet week. Below is summary of the bugs opened this last week and its current status. ## High * https://bugs.launchpad.net/neutron/+bug/2048745 - [ovn] FIP not working when mixing vlan and geneve tenant networks - not assigned, many things to consider before we will start working on this improvement really * https://bugs.launchpad.net/neutron/+bug/2048785 - Trunk parent port (tpt port) vlan_mode is wrong in ovs - WIP fix already started by Bence: https://review.opendev.org/c/openstack/neutron/+/905125 * https://bugs.launchpad.net/neutron/+bug/2049265 - [OVN] The ``MaintenanceWorker`` shoudl register the "Private_Chassis" table in the SB connection - assigned to Terry Wilson, fixes already proposed https://review.opendev.org/q/I711996b7644e80bc195833e4429e4d745728f9cf ## Medium * https://bugs.launchpad.net/neutron/+bug/2048979 - [ml2][ovs] ports without local vlan tag are processed on openflow security group - fix proposed by LIU: https://review.opendev.org/c/openstack/neutron/+/905289 ## Others * https://bugs.launchpad.net/neutron/+bug/2048773 - neutron-meter-agent do not support ovn driver - unassigned, it isn't really completly new RFE IMO but probably approach to take to close this gap may be discussed e.g. in the drivers meeting, * https://bugs.launchpad.net/neutron/+bug/2049398 - [Tempest] neutron_tempest_plugin.api.admin.test_external_network_extension.ExternalNetworksRBACTestJSON.test_delete_policies_while_tenant_attached_to_net "Created Network is Not an External Network" Error - needs some more info to be triaged, I will take care of it -- Slawek Kaplonski Principal Software Engineer Red Hat

1 0

[Image Encryptione] Cancelling tomorrows meeting
by Josephine Seifert 15 Jan '24

15 Jan '24

Hi, unfortunately I have to cancel tomorrows meeting. greetings, Luzi (Josephine)

1 0

[kolla]Boot one VM with two GPU(in same numa)by pci passthrough cannot have GPUDirect P2P capability
by dazhaoyu＠126.com 13 Jan '24

13 Jan '24

I have two GPU cards, all of them was connect with one same numa CPU socket as below link info: https://paste.opendev.org/show/b7Qi8qCnbLVxO2W0JdQw/ I can boot one nova instance successfully with the two GPU cards by PCI Passthrough way. but in the booted instances, use deviceQuery method would get the below message: Peer access from NVIDIA RTX 6000(GPU0) -> NVIDIA RTX 6000(GPU1): NO Peer access from NVIDIA RTX 6000(GPU1) -> NVIDIA RTX 6000(GPU0): NO The expected return should be as below： Peer access from NVIDIA RTX 6000(GPU0) -> NVIDIA RTX 6000(GPU1): YES Peer access from NVIDIA RTX 6000(GPU1) -> NVIDIA RTX 6000(GPU0): YES so that the memory can be shared between the two GPUs. I'm running Openstack Xena release in Intel Xeon Gold 5220R CPU

1 0

[release] Release countdown for week R-11, Jan 15-19
by Elõd Illés 13 Jan '24

13 Jan '24

Development Focus ----------------- We are now past the Caracal-2 milestone, and entering the last development phase of the cycle. Teams should be focused on implementing planned work for the cycle. Now is a good time to review those plans and reprioritize anything if needed based on the what progress has been made and what looks realistic to complete in the next few weeks. General Information ------------------- Looking ahead to the end of the release cycle, please be aware of the feature freeze dates. Those vary depending on deliverable type: * General libraries (except client libraries) need to have their last feature release before Non-client library freeze (February 22nd, 2024). Their stable branches are cut early. * Client libraries (think python-*client libraries) need to have their last feature release before Client library freeze (February 29th, 2024) * Deliverables following a cycle-with-rc model (that would be most services) observe a Feature freeze on that same date, February 29th, 2024. Any feature addition beyond that date should be discussed on the mailing-list and get PTL approval. After feature freeze, cycle-with-rc deliverables need to produce a first release candidate (and a stable branch) before RC1 deadline (March 14th, 2024) * Deliverables following cycle-with-intermediary model can release as necessary, but in all cases before Final RC deadline (March 28th, 2024) Upcoming Deadlines & Dates -------------------------- Non-client library freeze: February 22nd, 2024 (R-6 week) Client library freeze: February 29th, 2024 (R-5 week) Caracal-3 milestone: February 29th, 2024 (R-5 week) 2024.1 Caracal final release: April 3rd, 2024 2024.2 'D' virtual PTG ( https://openinfra.dev/ptg/ ): April 8th-12th, 2024 Előd Illés irc: elodilles @ #openstack-release

1 0