June 2023 - openstack-discuss - lists.openstack.org

Kolla Ansible on Ubuntu 20.04 - cloud-init & other network issues
by Tobias McNulty 10 Oct '24

10 Oct '24

Hi, I'm attempting to use Kolla Ansible 14.6.0 to deploy OpenStack Yoga on a small 3-node Ubuntu 20.04 cluster. The nodes have 128 GB RAM each, dual Xeon processors, and dual 10G Intel NICs. The NICs are connected to access ports on a 10G switch with separate VLANs for the local and external networks. All the playbooks run cleanly, but cloud-init is failing in the Ubuntu 20.04 and 22.04 VMs I attempt to boot. The VM images are unmodified from https://cloud-images.ubuntu.com/, and cloud-init works fine if I mount a second volume with user-data. The error is a timeout attempting to reach 169.254.169.254. This occurs both when booting a VM in an internal routed network and directly in an external network. I tried various neutron plugin agents (ovn, linuxbridge, and openvswitch both with and without firewall_driver = openvswitch <https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro…>) first with a clean install of the entire OS each time, all with the same result. Running tcpdump looking for 169.254.169.254 shows nothing. As a possible clue, the virtual NICs are unable to pass any traffic (e.g., to reach an external DHCP server) unless I completely disable port security on the interface (even if the associated security group is wide open). But disabling port security does not fix cloud-init (not to mention I don't really want to disable port security). Are there any additional requirements related to deploying OpenStack with Kolla on Ubuntu 20.04? This is a fairly vanilla configuration using the multinode inventory as a starting point. I tried to follow the Quick Start <https://docs.openstack.org/kolla-ansible/yoga/user/quickstart.html> as closely as possible; the only material difference I see is that I'm using the same 3 nodes for control + compute. I am using MAAS so it's easy to get a clean OS install on all three nodes ahead of each attempt. I plan to try again with the standard (non-HWE) kernel just in case, but otherwise I am running out of ideas. In case of any additional clues, here are my globals.yml and inventory file, along with the playbook I'm using to configure the network, images, VMs, etc., after bootstrapping the cluster: https://gist.github.com/tobiasmcnulty/7dbbdbc67abc08cbb013bf5983852ed6 Thank you in advance for any advice! Cheers, Tobias

5 9

Live migration fails
by Szabo, Istvan (Agoda) 07 Aug '24

07 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[ptl][tc] OpenStack packages PyPi additional external maintainers audit & cleanup
by Ghanshyam Mann 17 May '24

17 May '24

Hi PTLs, As you might know or have seen for your project package on PyPi, OpenStack deliverables on PyPi have additional maintainers, For example, https://pypi.org/project/murano/, https://pypi.org/project/glance/ We should keep only 'openstackci' as a maintainer in PyPi so that releases of OpenStack deliverables can be managed in a single place. Otherwise, we might face the two sets of maintainers' places and packages might get released in PyPi by additional maintainers without the OpenStack project team knowing about it. One such case is in Horizon repo 'xstatic-font-awesome' where a new maintainer is added by an existing additional maintainer and this package was released without the Horizon team knowing about the changes and release. - https://github.com/openstack/xstatic-font-awesome/pull/2 To avoid the 'xstatic-font-awesome' case for other packages, TC discussed it in their weekly meetings[1] and agreed to audit all the OpenStack packages and then clean up the additional maintainers in PyPi (keep only 'openstackci' as maintainers). To help in this task, TC requests project PTL to perform the audit for their project's repo and add comments in the below etherpad. - https://etherpad.opendev.org/p/openstack-pypi-maintainers-cleanup Thanks to knikolla to automate the listing of the OpenStack packages with additional maintainers in PyPi which you can find the result in output.txt at the bottom of this link. I have added the project list of who needs to check their repo in etherpad. - https://gist.github.com/knikolla/7303a65a5ddaa2be553fc6e54619a7a1 Please complete the audit for your project before March 15 so that TC can discuss the next step in vPTG. [1] https://meetings.opendev.org/meetings/tc/2023/tc.2023-01-11-16.00.log.html#… -gmann

18 27

[Watcher] How use Watcher to scheduler Openstack resource without cpu_usage
by Nguyễn Hữu Khôi 06 Mar '24

06 Mar '24

Hello guys. I want to use watcher to scheduler openstack resources but some openstack versions are missing cpu_usage metric. How do we use Watcher without it? Thank you. Nguyen Huu Khoi

3 5

[designate] Proposal to deprecate the agent framework and agent based backends
by Michael Johnson 09 Jan '24

09 Jan '24

TLDR: The Designate team would like to deprecate the backend agent framework and the agent based backends due to lack of development and design issues with the current implementation. The following backends would be deprecated: Bind9 (Agent), Denominator, Microsoft DNS (Agent), Djbdns (Agent), Gdnsd (Agent), and Knot2 (Agent). Designate includes many backend DNS server drivers[1], many of which are "native" (also known as xfr type backends) backend implementations. In addition to the "native" backends, Designate has an agent backend[2] that supports other backends via an agent process. To quote the agent backend documentation[2]: This backend uses an extension[3] of the DNS protocol itself to send management requests to the remote agent processes, where the requests will be actioned. The rpc traffic between designate and the agent is both unauthenticated and unencrypted. Do not run this traffic over unsecured networks. Here are the reasons we are proposing to deprecate the agent framework now: 1. The agent protocol used by Designate is using an "unassigned"[4][5] DNS opcode (14) that is causing problems with the dnspython library >= 2.3.0 which is now validating the opcode when building DNS messages. It is a bad practice to use "unassigned" values as they may be officially assigned at any time, likely with an incompatible message format. 2. The agent backends are not tested in the OpenStack jobs[1]. 3. Many of the agent backends have been marked as "Experimental" since 2016 with no additional contributions beyond general repository code maintenance. 4. The protocol between the Designate worker process and the agent process is unauthenticated and unencrypted. 5. We do not know of a development resource to rewrite the agent framework protocol to address issue #1 and #4 above. 6. The introduction of catalog zones[6] may eliminate the need for some of the agent based backend drivers. By marking the agent framework and agent based backends "deprecated" in the Antelope cycle, we would remove the code no earlier than the "C" release of OpenStack (per the OpenStack deprecation policy[7]). In the meantime, issue #1 has been worked around by overriding the dnspython opcode validation[7] as needed in the Designate code (similar to a monkey patch). This is not a sustainable long term solution. The following backend agent based drivers would be marked "deprecated" in addition to the agent framework itself: Bind9 (Agent) Denominator Microsoft DNS (Agent) Djbdns (Agent) Gdnsd (Agent) Knot2 (Agent) We plan to propose patches for the deprecation over the next week, but will not merge them until at least January 24th to allow time for comment from the community. If you have concerns about this deprecation plan or are interested in rewriting the agent framework protocol to address the above issues, please reply to this announcement. Michael [1] https://docs.openstack.org/designate/latest/admin/support-matrix.html [2] https://docs.openstack.org/designate/latest/admin/backends/agent.html [3] https://github.com/openstack/designate/blob/master/designate/backend/privat… [4] https://www.rfc-editor.org/rfc/rfc6895.html#section-2.2 [5] https://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-pa… [6] https://www.ietf.org/archive/id/draft-ietf-dnsop-dns-catalog-zones-08.txt [7] https://docs.openstack.org/project-team-guide/deprecation.html [8] https://review.opendev.org/c/openstack/designate/+/870678

3 13

[OPENSTACK][rabbitmq] using quorum queues
by Nguyễn Hữu Khôi 17 Oct '23

17 Oct '23

Hello guys. IS there any guy who uses the quorum queue for openstack? Could you give some feedback to compare with classic queue? Thank you. Nguyen Huu Khoi

9 19

[ptl][tc][winstackers] Final call for Winstackers PTL and maintainers
by James Page 11 Sep '23

11 Sep '23

Hi All As announced by Lucian last November (see [0]) Cloudbase Solutions are no longer in a position to maintain support for running OpenStack on Windows and have also ceased operation of their 3rd party CI for the windows support across a number of OpenStack projects. This situation has resulted in the Winstackers project becoming PTL-less for the 2023.2 cycle with no volunteers responding to the TC's call to fill this role and take this feature in OpenStack forward (see [1]). This is the final call for any maintainers to step forward if this feature is important to them in OpenStack. The last user survey in 2022 indicated that 2% of respondents were running on Hyper-V so this might be important enough to warrant a commitment from someone operating OpenStack on Windows to maintain these features going forward. Here is a reminder from Lucian's original email on the full list of projects which are impacted in some way: * nova hyper-v driver - in-tree plus out-of-tree compute-hyperv driver * os-win - common Windows library for Openstack * neutron hyperv ml2 plugin and agent * ovs on Windows and neutron ovs agent support * cinder drivers - SMB and Windows iSCSI * os-brick Windows connectors - iSCSI, FC, SMB, RBD * ceilometer Windows poller * manila Windows driver * glance Windows support * freerdp gateway The lack of 3rd party CI for testing all of this really needs to be addressed as well. If no maintainers are forthcoming between now and the next PTG in June the TC will need to officially retire the project and start the process of removing support for Windows across the various projects that support this operating system in some way - either directly or through the use of os-win. For clarity this call refers to the use of the Hyper-V virtualisation driver and associated Windows server components to provide WIndows based OpenStack Hypervisors and does not relate to the ability to run Windows images as guests on OpenStack. Regards James [0] https://lists.openstack.org/pipermail/openstack-discuss/2022-November/03104… [1] https://lists.openstack.org/pipermail/openstack-discuss/2023-March/032888.h…

5 9

[openstack-ansible] Recommended branch for a production environment?
by Roger Rivera 05 Sep '23

05 Sep '23

Hello, We have deployed Openstack-Ansible in a test environment and we were wondering what the recommended repository branch is to deploy in a production environment that will be integrated with a separate Ceph cluster. 1. We are thinking about pinning to the stable/zed. Is that recommended over the master branch? 2. Are bugs ironed out on both master and stable/zed with the same cadence? 3. Additionally, is Debian 11 a better alternative than Ubuntu 22 for target hosts? We noticed Ubuntu 22.04 support was added recently, whereas Debian 11 has been supported for quite some time now which leads us to believe its stability/integration could be more mature at this point? Any suggestions will be appreciated. Thank you, -- *Roger *

3 7

[puppet] Proposing core team clean up
by Takashi Kajinami 23 Aug '23

23 Aug '23

Hello, I went through the current core reviewers and found out that the current list includes some people no longer working in the OpenStack community. I'd like to propose removing the following persons from the core reviewer team as we haven't seen these people making any activity in the community recently. * Pradeep Kilambi - puppet-aodh, puppet-ceilometer, puppet-gnocchi, puppet-panko * Richard Megginson - puppet-keystone * Denis Egorenko - puppet-murano * Serg Melikyan - puppet-murano * Sergey Kolekonov - puppet-neutron * David Moreau Simard - puppet-openstack-integration * Yu xingchao - all modules Also, I confirmed that Wes Hayutin is no longer working for OpenStack and he agreed to retire from the core reviewer position. Thus I'll remove him as well. I'll be open for any feedback for one week to hear any thoughts/feedback about this removal. I'd like to take this moment to thank all people for their past work. We always welcome them back if they resume their work in this project. Thank you, Takashi KAJINAMI

3 4

[cloudkitty] question to the scope_key in cloudkitty
by Noah Elias Feldt 28 Jul '23

28 Jul '23

Hello! I am currently trying to get CloudKitty to work with the Prometheus Collector and PyScripts. I noticed that the scope_key for Prometheus can only be changed once in the global configuration file. This was a problem for me because we need different scope_keys for different metrics. Many of the metrics still need the scope key "tenant_id" and some others "project_id". I have found in the documentation of CloudKitty no way to change this for each metric, so I have internally changed something in the source code and added the function to set the scope_key for each metric individually. I just wanted to ask if you would be interested if I submit the small change upstream? Thank you. Regards Noah Feldt

3 3