February 2023 - openstack-discuss

[barbican][oslo][nova][glance][cinder] cursive library status
by Brian Rosmaita 27 May '26

27 May '26

Hello Barbican team, Apologies for not including barbican in the previous thread on this topic: http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019430… The situation is that cursive is used by Nova, Glance, and Cinder and we'd like to move it out of the 'x' namespace into openstack governance. The question is then what team would oversee it. It seems like a good fit for Oslo, and the Oslo team seems OK with that, but since barbican-core is currently included in cursive-core, it make sense to give the Barbican team first dibs. From the consuming teams' side, I don't think we have a preference as long as it's clear who we need to bother about approvals if a bugfix is posted for review. Thus my ask is that the Barbican team indicate whether they'd like to move cursive to the 'openstack' namespace under their governance, or whether they'd prefer Oslo to oversee the library. Thank you! brian

6 6

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 24 Apr '25

24 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 23 Apr '25

23 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat.| Openstack tripleo wallaby version
by Swogat Pradhan 24 Dec '24

24 Dec '24

Hi, I am currently trying to deploy openstack wallaby using tripleo arch. I created the network jinja templates, ran the following commands also: #openstack overcloud network provision --stack overcloud --output networks-deployed-environment.yaml custom_network_data.yaml # openstack overcloud network vip provision --stack overcloud --output vip-deployed-environment.yaml custom_vip_data.yaml # openstack overcloud node provision --stack overcloud --overcloud-ssh-key /home/stack/sshkey/id_rsa overcloud-baremetal-deploy.yaml and used the environment files in the openstack overcloud deploy command: (undercloud) [stack@hkg2director ~]$ cat deploy.sh #!/bin/bash THT=/usr/share/openstack-tripleo-heat-templates/ CNF=/home/stack/ openstack overcloud deploy --templates $THT \ -r $CNF/templates/roles_data.yaml \ -n $CNF/workplace/custom_network_data.yaml \ -e ~/containers-prepare-parameter.yaml \ -e $CNF/templates/node-info.yaml \ -e $CNF/templates/scheduler-hints.yaml \ -e $CNF/workplace/networks-deployed-environment.yaml \ -e $CNF/workplace/vip-deployed-environment.yaml \ -e $CNF/workplace/overcloud-baremetal-deployed.yaml \ -e $CNF/workplace/custom-net-bond-with-vlans.yaml Now when i run the ./deploy.sh script i encounter an error stating: ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command.: tripleoclient.exceptions.InvalidConfiguration: Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command. 2022-04-19 13:47:16.582 735924 INFO osc_lib.shell [-] END return value: 1 Can someone tell me where the mistake is? With regards, Swogat Pradhan

4 4

Kolla Ansible on Ubuntu 20.04 - cloud-init & other network issues
by Tobias McNulty 11 Oct '24

11 Oct '24

Hi, I'm attempting to use Kolla Ansible 14.6.0 to deploy OpenStack Yoga on a small 3-node Ubuntu 20.04 cluster. The nodes have 128 GB RAM each, dual Xeon processors, and dual 10G Intel NICs. The NICs are connected to access ports on a 10G switch with separate VLANs for the local and external networks. All the playbooks run cleanly, but cloud-init is failing in the Ubuntu 20.04 and 22.04 VMs I attempt to boot. The VM images are unmodified from https://cloud-images.ubuntu.com/, and cloud-init works fine if I mount a second volume with user-data. The error is a timeout attempting to reach 169.254.169.254. This occurs both when booting a VM in an internal routed network and directly in an external network. I tried various neutron plugin agents (ovn, linuxbridge, and openvswitch both with and without firewall_driver = openvswitch <https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro…>) first with a clean install of the entire OS each time, all with the same result. Running tcpdump looking for 169.254.169.254 shows nothing. As a possible clue, the virtual NICs are unable to pass any traffic (e.g., to reach an external DHCP server) unless I completely disable port security on the interface (even if the associated security group is wide open). But disabling port security does not fix cloud-init (not to mention I don't really want to disable port security). Are there any additional requirements related to deploying OpenStack with Kolla on Ubuntu 20.04? This is a fairly vanilla configuration using the multinode inventory as a starting point. I tried to follow the Quick Start <https://docs.openstack.org/kolla-ansible/yoga/user/quickstart.html> as closely as possible; the only material difference I see is that I'm using the same 3 nodes for control + compute. I am using MAAS so it's easy to get a clean OS install on all three nodes ahead of each attempt. I plan to try again with the standard (non-HWE) kernel just in case, but otherwise I am running out of ideas. In case of any additional clues, here are my globals.yml and inventory file, along with the playbook I'm using to configure the network, images, VMs, etc., after bootstrapping the cluster: https://gist.github.com/tobiasmcnulty/7dbbdbc67abc08cbb013bf5983852ed6 Thank you in advance for any advice! Cheers, Tobias

5 9

Live migration fails
by Szabo, Istvan (Agoda) 07 Aug '24

07 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[ptl][tc] OpenStack packages PyPi additional external maintainers audit & cleanup
by Ghanshyam Mann 17 May '24

17 May '24

Hi PTLs, As you might know or have seen for your project package on PyPi, OpenStack deliverables on PyPi have additional maintainers, For example, https://pypi.org/project/murano/, https://pypi.org/project/glance/ We should keep only 'openstackci' as a maintainer in PyPi so that releases of OpenStack deliverables can be managed in a single place. Otherwise, we might face the two sets of maintainers' places and packages might get released in PyPi by additional maintainers without the OpenStack project team knowing about it. One such case is in Horizon repo 'xstatic-font-awesome' where a new maintainer is added by an existing additional maintainer and this package was released without the Horizon team knowing about the changes and release. - https://github.com/openstack/xstatic-font-awesome/pull/2 To avoid the 'xstatic-font-awesome' case for other packages, TC discussed it in their weekly meetings[1] and agreed to audit all the OpenStack packages and then clean up the additional maintainers in PyPi (keep only 'openstackci' as maintainers). To help in this task, TC requests project PTL to perform the audit for their project's repo and add comments in the below etherpad. - https://etherpad.opendev.org/p/openstack-pypi-maintainers-cleanup Thanks to knikolla to automate the listing of the OpenStack packages with additional maintainers in PyPi which you can find the result in output.txt at the bottom of this link. I have added the project list of who needs to check their repo in etherpad. - https://gist.github.com/knikolla/7303a65a5ddaa2be553fc6e54619a7a1 Please complete the audit for your project before March 15 so that TC can discuss the next step in vPTG. [1] https://meetings.opendev.org/meetings/tc/2023/tc.2023-01-11-16.00.log.html#… -gmann

18 27

[Watcher] How use Watcher to scheduler Openstack resource without cpu_usage
by Nguyễn Hữu Khôi 07 Mar '24

07 Mar '24

Hello guys. I want to use watcher to scheduler openstack resources but some openstack versions are missing cpu_usage metric. How do we use Watcher without it? Thank you. Nguyen Huu Khoi

3 5

[designate] Proposal to deprecate the agent framework and agent based backends
by Michael Johnson 10 Jan '24

10 Jan '24

TLDR: The Designate team would like to deprecate the backend agent framework and the agent based backends due to lack of development and design issues with the current implementation. The following backends would be deprecated: Bind9 (Agent), Denominator, Microsoft DNS (Agent), Djbdns (Agent), Gdnsd (Agent), and Knot2 (Agent). Designate includes many backend DNS server drivers[1], many of which are "native" (also known as xfr type backends) backend implementations. In addition to the "native" backends, Designate has an agent backend[2] that supports other backends via an agent process. To quote the agent backend documentation[2]: This backend uses an extension[3] of the DNS protocol itself to send management requests to the remote agent processes, where the requests will be actioned. The rpc traffic between designate and the agent is both unauthenticated and unencrypted. Do not run this traffic over unsecured networks. Here are the reasons we are proposing to deprecate the agent framework now: 1. The agent protocol used by Designate is using an "unassigned"[4][5] DNS opcode (14) that is causing problems with the dnspython library >= 2.3.0 which is now validating the opcode when building DNS messages. It is a bad practice to use "unassigned" values as they may be officially assigned at any time, likely with an incompatible message format. 2. The agent backends are not tested in the OpenStack jobs[1]. 3. Many of the agent backends have been marked as "Experimental" since 2016 with no additional contributions beyond general repository code maintenance. 4. The protocol between the Designate worker process and the agent process is unauthenticated and unencrypted. 5. We do not know of a development resource to rewrite the agent framework protocol to address issue #1 and #4 above. 6. The introduction of catalog zones[6] may eliminate the need for some of the agent based backend drivers. By marking the agent framework and agent based backends "deprecated" in the Antelope cycle, we would remove the code no earlier than the "C" release of OpenStack (per the OpenStack deprecation policy[7]). In the meantime, issue #1 has been worked around by overriding the dnspython opcode validation[7] as needed in the Designate code (similar to a monkey patch). This is not a sustainable long term solution. The following backend agent based drivers would be marked "deprecated" in addition to the agent framework itself: Bind9 (Agent) Denominator Microsoft DNS (Agent) Djbdns (Agent) Gdnsd (Agent) Knot2 (Agent) We plan to propose patches for the deprecation over the next week, but will not merge them until at least January 24th to allow time for comment from the community. If you have concerns about this deprecation plan or are interested in rewriting the agent framework protocol to address the above issues, please reply to this announcement. Michael [1] https://docs.openstack.org/designate/latest/admin/support-matrix.html [2] https://docs.openstack.org/designate/latest/admin/backends/agent.html [3] https://github.com/openstack/designate/blob/master/designate/backend/privat… [4] https://www.rfc-editor.org/rfc/rfc6895.html#section-2.2 [5] https://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-pa… [6] https://www.ietf.org/archive/id/draft-ietf-dnsop-dns-catalog-zones-08.txt [7] https://docs.openstack.org/project-team-guide/deprecation.html [8] https://review.opendev.org/c/openstack/designate/+/870678

3 13

[openstack-ansible] Recommended branch for a production environment?
by Roger Rivera 06 Sep '23

06 Sep '23

Hello, We have deployed Openstack-Ansible in a test environment and we were wondering what the recommended repository branch is to deploy in a production environment that will be integrated with a separate Ceph cluster. 1. We are thinking about pinning to the stable/zed. Is that recommended over the master branch? 2. Are bugs ironed out on both master and stable/zed with the same cadence? 3. Additionally, is Debian 11 a better alternative than Ubuntu 22 for target hosts? We noticed Ubuntu 22.04 support was added recently, whereas Debian 11 has been supported for quite some time now which leads us to believe its stability/integration could be more mature at this point? Any suggestions will be appreciated. Thank you, -- *Roger *

3 7