November 2023 - openstack-discuss

[openstack][kolla-ansible]about group node config overwrite
by Nguyễn Hữu Khôi 29 Oct '25

29 Oct '25

Hello Koller. I want to ask if we can overwrite config for a group of nodes. For example, compute01 >> compute10 will have the same nova configuration compute11 >> compute20 will have the same nova configuration. It will be very nice if we support this way. Thank you. Regards Nguyen Huu Khoi

4 7

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 23 Apr '25

23 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 22 Apr '25

22 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat.| Openstack tripleo wallaby version
by Swogat Pradhan 23 Dec '24

23 Dec '24

Hi, I am currently trying to deploy openstack wallaby using tripleo arch. I created the network jinja templates, ran the following commands also: #openstack overcloud network provision --stack overcloud --output networks-deployed-environment.yaml custom_network_data.yaml # openstack overcloud network vip provision --stack overcloud --output vip-deployed-environment.yaml custom_vip_data.yaml # openstack overcloud node provision --stack overcloud --overcloud-ssh-key /home/stack/sshkey/id_rsa overcloud-baremetal-deploy.yaml and used the environment files in the openstack overcloud deploy command: (undercloud) [stack@hkg2director ~]$ cat deploy.sh #!/bin/bash THT=/usr/share/openstack-tripleo-heat-templates/ CNF=/home/stack/ openstack overcloud deploy --templates $THT \ -r $CNF/templates/roles_data.yaml \ -n $CNF/workplace/custom_network_data.yaml \ -e ~/containers-prepare-parameter.yaml \ -e $CNF/templates/node-info.yaml \ -e $CNF/templates/scheduler-hints.yaml \ -e $CNF/workplace/networks-deployed-environment.yaml \ -e $CNF/workplace/vip-deployed-environment.yaml \ -e $CNF/workplace/overcloud-baremetal-deployed.yaml \ -e $CNF/workplace/custom-net-bond-with-vlans.yaml Now when i run the ./deploy.sh script i encounter an error stating: ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command.: tripleoclient.exceptions.InvalidConfiguration: Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command. 2022-04-19 13:47:16.582 735924 INFO osc_lib.shell [-] END return value: 1 Can someone tell me where the mistake is? With regards, Swogat Pradhan

4 4

[kolla] [openeuler] CI jobs status
by Michał Nasiadka 26 Nov '24

26 Nov '24

Hello Koalas, OpenEuler jobs in master (to be Antelope) are failing for a long time. If no one is interested in maintaining OpenEuler support in Kolla-Ansible - I will propose dropping it’s support on Wednesday Kolla meeting. Best regards, Michal

4 3

Kolla Ansible on Ubuntu 20.04 - cloud-init & other network issues
by Tobias McNulty 10 Oct '24

10 Oct '24

Hi, I'm attempting to use Kolla Ansible 14.6.0 to deploy OpenStack Yoga on a small 3-node Ubuntu 20.04 cluster. The nodes have 128 GB RAM each, dual Xeon processors, and dual 10G Intel NICs. The NICs are connected to access ports on a 10G switch with separate VLANs for the local and external networks. All the playbooks run cleanly, but cloud-init is failing in the Ubuntu 20.04 and 22.04 VMs I attempt to boot. The VM images are unmodified from https://cloud-images.ubuntu.com/, and cloud-init works fine if I mount a second volume with user-data. The error is a timeout attempting to reach 169.254.169.254. This occurs both when booting a VM in an internal routed network and directly in an external network. I tried various neutron plugin agents (ovn, linuxbridge, and openvswitch both with and without firewall_driver = openvswitch <https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro…>) first with a clean install of the entire OS each time, all with the same result. Running tcpdump looking for 169.254.169.254 shows nothing. As a possible clue, the virtual NICs are unable to pass any traffic (e.g., to reach an external DHCP server) unless I completely disable port security on the interface (even if the associated security group is wide open). But disabling port security does not fix cloud-init (not to mention I don't really want to disable port security). Are there any additional requirements related to deploying OpenStack with Kolla on Ubuntu 20.04? This is a fairly vanilla configuration using the multinode inventory as a starting point. I tried to follow the Quick Start <https://docs.openstack.org/kolla-ansible/yoga/user/quickstart.html> as closely as possible; the only material difference I see is that I'm using the same 3 nodes for control + compute. I am using MAAS so it's easy to get a clean OS install on all three nodes ahead of each attempt. I plan to try again with the standard (non-HWE) kernel just in case, but otherwise I am running out of ideas. In case of any additional clues, here are my globals.yml and inventory file, along with the playbook I'm using to configure the network, images, VMs, etc., after bootstrapping the cluster: https://gist.github.com/tobiasmcnulty/7dbbdbc67abc08cbb013bf5983852ed6 Thank you in advance for any advice! Cheers, Tobias

5 9

Live migration fails
by Szabo, Istvan (Agoda) 06 Aug '24

06 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[ptl][tc] OpenStack packages PyPi additional external maintainers audit & cleanup
by Ghanshyam Mann 16 May '24

16 May '24

Hi PTLs, As you might know or have seen for your project package on PyPi, OpenStack deliverables on PyPi have additional maintainers, For example, https://pypi.org/project/murano/, https://pypi.org/project/glance/ We should keep only 'openstackci' as a maintainer in PyPi so that releases of OpenStack deliverables can be managed in a single place. Otherwise, we might face the two sets of maintainers' places and packages might get released in PyPi by additional maintainers without the OpenStack project team knowing about it. One such case is in Horizon repo 'xstatic-font-awesome' where a new maintainer is added by an existing additional maintainer and this package was released without the Horizon team knowing about the changes and release. - https://github.com/openstack/xstatic-font-awesome/pull/2 To avoid the 'xstatic-font-awesome' case for other packages, TC discussed it in their weekly meetings[1] and agreed to audit all the OpenStack packages and then clean up the additional maintainers in PyPi (keep only 'openstackci' as maintainers). To help in this task, TC requests project PTL to perform the audit for their project's repo and add comments in the below etherpad. - https://etherpad.opendev.org/p/openstack-pypi-maintainers-cleanup Thanks to knikolla to automate the listing of the OpenStack packages with additional maintainers in PyPi which you can find the result in output.txt at the bottom of this link. I have added the project list of who needs to check their repo in etherpad. - https://gist.github.com/knikolla/7303a65a5ddaa2be553fc6e54619a7a1 Please complete the audit for your project before March 15 so that TC can discuss the next step in vPTG. [1] https://meetings.opendev.org/meetings/tc/2023/tc.2023-01-11-16.00.log.html#… -gmann

18 27

[all][packaging][release][qa] pep-517 and pip 23
by smooney＠redhat.com 06 May '24

06 May '24

hi folks, TL;DR ----- this is a long email so the tl;dr is we should add pyproject.toml ``` [build-system] requires = ["pbr>=5.7.0", "setuptools>=36.6.0", "wheel"] build-backend = "pbr.build" ``` to all openstack projects to supprot pip 23.1+ Long version ------------ As some of you may know the ptg happend last week an done of hte topic raised there was a know limitation in devstack where GLOBAL_VENV=True does not work on centos/fedora derived distros. while i generally dont use centos/fedora derived distros for my daily work i have been using devstack for over 10 years at this point so when im told it broken i ocationlly will go fix it. In this case the issue is not with devstack (it often isnt) and is actully in our collective reliance on a deprecated functionality and how we package openstack today. Back story, for better or worse when openstack was created the landscape of python packaging was significantly different then it is today. To help corodinate our dependcies the openstack comunity went all in on requirements.txt and developed upper-constraits to manage our requirements and developed PBR (python build Reasonableness). both of those approches have served us well and likely will continue to do so for some time. Since then pyproject.toml has started to gain popularity and pep-517 (A build-system independent format for source trees) has been adotpted but so far openstack as a comunity has not embraced those changes. (although pbr already supprot pep-517 :) ). Until now this has not been a problem however with recent release of pip things are now breaking. Problem Context: - openstack does not provide pyporject.toml files - openstack project configure setuptools to use pbr via setup.py - setuptools support generating scripts form entry points(console_scripts) which we use for project binaries( nova- compute, neutron-server, ...) - openstack api services use a pbr extension know as wsgi_scripts which adds a similar functionality for generating wsgi application mains file - devstack due to coming changes in distro to block "sudo pip install" now installs openstack in a single by default on debian distros. on centos/fedora distros it currently almost functional (but not). - devstack installs in editable mode because that is how most developers use devstack for developemnt What changed: - pip 20.2 deprecated support for falling back to calling setup.py when pyproject.toml is not present - https://pip.pypa.io/en/stable/news/#v20-2 - https://github.com/pypa/pip/issues/8368 - at this point when pyproject.yaml is not called pip calls setup.py install [-e] <path to repo or package name> - setup.py invokes pbr to generate wsgi_scripts and other files - in pip 23.1 the fallback was removed https://pip.pypa.io/en/stable/news/#v23-1 - pip now builds a temp local wheel instead of calling setup.py install when pyproject.toml is not found - in editable mode (-e) the default way the wheel is built does not invoke pbr properly to generate the wsgi files - as a result the wsgi files are not installed to the venv bin dir and this causes devstack to fail to start keystone (or any other wsgi api) The fix, there are a few ways to approch this: - clamp pip (https://review.opendev.org/c/openstack/devstack/+/898845) this is a terible idea and it breaks debian - clamping pip below 23.1 works on centos for now however OVS on debian already requires pep 517 for installing - as such when that version of ovs (or other projects start enforcing that) hits centos it will break - add a minimal pyproject.toml to all openstack project - example for keystone https://review.opendev.org/c/openstack/keystone/+/899519 - this example jsut adds the minium pyproject.toml to enable pbr to be used as the build system - it does not remove supprot for setup.py but it will not be used by default going forward whit new version of pip - all config is still in setup.cfg - add pyproject.toml support but remove setup.py support https://review.opendev.org/c/opendev/bindep/+/816741 - this goes one step futrue and actuly nulls out setup.py - we could take this approach if we want to but its not required. The reason for this email is to get agreement on how to support pip 23.1+ My proposal would be to add pyproject.toml with the minimal config required to enable pip 23.2 but not drop the setup.py support in this cycle. i would suggest that we can deprecate installing via setup.py in caracal if that is desirable but not make that change until the next slurp to give time to projects and packages to catch up. if there are no objections to that i would like to ask what is the preferd way to create and submit the patches for the minimal pyproject.toml ``` [build-system] requires = ["pbr>=5.7.0", "setuptools>=36.6.0", "wheel"] build-backend = "pbr.build" ``` i can propose patches to the main project deployed by devstack by default. i.e. nova/neutron ectra but it might be better if someone form the core teams of each project could take on that task and chasing the reviews. if someone has a script to generate a patch for a set of repos that just add the above pyporject.toml then we can use that to keep a consistent topic/commit message across all patches. my proposal for testing this is two fold. in ci we can test the patches are functional by using a DNM patch to devstack to force enable the gloal venv on centos and depend on the set of patches, i will modify https://review.opendev.org/c/openstack/devstack/+/898845 to do that locally we can test that the patch is functional by doing the following substituting keystone for the relevant project. ``` git clone https://opendev.org/openstack/keystone cd keystone python3 -m venv .venv . .venv/bin/activate python3 -m pip install -U pip python3 -m pip install -e . ls .venv/bin/keystone* ``` the ls will not contain the wsgi script with the addition of the pyproject.toml it should. on debian sid i can reproduce the same issue the problem we are seeing on centos 9 now will start impacting other distos eventually so its good to fix this now. if i start proposing this to glance/nova/neutron/cinder/swift/horizon/placement (to get a default devstack working) can i get cores to review? can cores form each project nominate peopel to review or volenteer to do this work. i have created https://etherpad.opendev.org/p/pep-517-and-pip-23 to track this work i have some other work that i think we can do in parallel like addign pyporject.toml support to the pti requirements if we go this way but that i think we can discuss on a governacne patch to updated it. anyway this is a lot to digest so feedback is welcome. if someone else would like to drive this that is also welcome (i.e. tc/release team) regards sean.

10 27

Accessing virsh in openstack wallaby | tripleo
by Swogat Pradhan 24 Mar '24

24 Mar '24

Hi, Can someone please tell me how can i access the virsh utility on the compute node on openstack wallaby? Previously we used nova_libvirt but in wallaby there are multiple containers and i am unable to use virsh utility to edit my domain.xml file. List of containers: [root@dcn01-hci-2 ~]# podman ps | grep nova 10d981158842 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtlogd_wrapper e91667516afc 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtsecretd a4b07fe0e833 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtnodedevd d7e1db393e9c 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtstoraged 5308a171793e 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 2 months ago nova_virtqemud f490a6249ba1 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo kolla_start 2 months ago Up 6 weeks ago nova_virtproxyd ab0441e56957 172.25.201.68:8787/tripleomaster/openstack-nova-compute:current-tripleo kolla_start 2 months ago Up 2 months ago (healthy) nova_migration_target f35fbba5b690 172.25.201.68:8787/tripleomaster/openstack-nova-compute:current-tripleo kolla_start 2 months ago Up 6 weeks ago (unhealthy) nova_compute 82bc01993106 172.25.201.68:8787/tripleomaster/openstack-nova-libvirt:current-tripleo /usr/sbin/virtlog... 2 months ago Up 2 months ago Can someone please suggest how I can i edit an instance xml file in this setup? With regards, Swogat Pradhan

2 5

[Freezer] Is Freezer dead?
by pi3.14＠tuta.io 18 Mar '24

18 Mar '24

Hi folks, is Freezer still supported? I don't see any real development going on with it. Is it recommended to use in a production Cloud environment? Are there other free and open source alternatives to Freezer? Thanks Roby

8 19

[cinder][glance][nova][telemetry][monasca][oslo][vmware] Can we deprecate(and remove) VMWare support ?
by Takashi Kajinami 07 Mar '24

07 Mar '24

Hi all, As you might know, some of the OpenStack projects currently support usage of VMWare component. However recently the VMware virt driver in nova was marked experimental in 2023.2 release [1] and it has been discussed that the driver will be removed in 2023.2 release[2], after deprecation is backported to 2023.1. (Please someone from nova team correct me if I'm wrong) So my current question is; Does it make sense to deprecate all of the features to support VMWare component ? My understanding is that these features were added to be used along with VMWare virt driver in nova, but once the virt driver is removed this use case is voided. I'll list up the features within the discussion scope below. nova: VMWare virt driver (this is already experimental by [1]) cinder: VMware Storage Driver (vmdk) glance: VMWare Datastore (I proposed deprecating this in [3][4]) ceilometer: VMWare virt driver (this was deprecated by [5]) os-brick: VmdkConnector monasca-agent: vcenter collector (*1) oslo.vmware: the whole project NOTE: These features are found based on dependency on oslo.vmware but there can be a few not listed here. Outside of OpenStack's governance, there are two projects dependent on oslo.vmware, networking-vsphere and vmware-nsx but both of these look inactive. Because of SLURP, we have to complete deprecation during in 2024.1 release so that we can drop the feature right after 2024.1. If we fail then we have to maintain these features until 2025.1 (the features already deprecated can be removed earlier, though). So I'd like to get feedback and decision before deadline for 2024.1 Thank you, Takashi (*1) Monasca is now inactive so I doubt anyone would work on this topic before it is retired. [1] https://review.opendev.org/c/openstack/nova/+/863911 [2] https://review.opendev.org/c/openstack/nova/+/897017 [3] https://review.opendev.org/c/openstack/glance_store/+/893696 [4] https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack… [5] https://review.opendev.org/c/openstack/ceilometer/+/894540

6 21

[Watcher] How use Watcher to scheduler Openstack resource without cpu_usage
by Nguyễn Hữu Khôi 06 Mar '24

06 Mar '24

Hello guys. I want to use watcher to scheduler openstack resources but some openstack versions are missing cpu_usage metric. How do we use Watcher without it? Thank you. Nguyen Huu Khoi

3 5

[openstack][skyline] Some works with skyline
by Nguyễn Hữu Khôi 25 Feb '24

25 Feb '24

Hello guys. I am working on Skyline. I can integrate my monitor tab on it. I will try to do something about it. If it works properly, I can contribute. It is a very nice project. I hope it will grow and grow in the future. Thanks Skyline Team. [image: image.png] Nguyen Huu Khoi

3 7

[neutron][vpnaas][ovn] Pushing VPNaaS support through OVN
by Mohammed Naser 12 Feb '24

12 Feb '24

Hi all! One of the biggest show stoppers for us for OVN is VPNaaS but I think it’s time that we’d like to be involved in getting it over the line, I want to thank Bodo who has shown a lot of patience in getting the code necessary, and it seems that the code works for them in production as well. I’d like to ask if possible for folks to review these two outstanding changes: https://review.opendev.org/c/openstack/neutron-tempest-plugin/+/847007 https://review.opendev.org/c/openstack/neutron-vpnaas/+/765353 I know Slawek had some concerns, so hoping that raising via the email list if Bodo can address those and over the next bit of time we can get this landed in, since it even has actual proper testing both in CI and with user feedback. Thanks! Mohammed

6 8

about magnum capi for production
by Nguyễn Hữu Khôi 07 Feb '24

07 Feb '24

Hello guys. Could you share with me some experience about using Magnum CAPI in production? https://github.com/vexxhost/magnum-cluster-api Thank you so much. Nguyen Huu Khoi

6 44

[all] SQLAlchemy 2.x support in Bobcat
by Thomas Goirand 02 Feb '24

02 Feb '24

Hi, As you may know, and to my great frustration, I'm not the maintainer of SQLAlchemy in Debian, even though OpenStack is the biggest consumer of it. The current maintainer insists that he wants to upload SQLA 2.x in Unstable, potentially breaking all of OpenStack. At the present moment, if I understand correctly, we're not there yet, and Bobcat doesn't have such a support. It would be ok for me, *IF* there are patches available on master, that I could backport to Bobcat and maintain in the debian/patches folder of each project. However, the biggest current annoyance, is that I have no idea where we are at. Are we close to such a support? Is there a list of patches to apply on top of Bobcat that is maintained somewhere? Please enlighten me... :) Cheers, Thomas Goirand (zigo)

5 10

[murano][heat][mistral][tc] Maintenance of yaql library
by Takashi Kajinami 21 Jan '24

21 Jan '24

Hello, The yaql library is currently maintained under murano's governance and is used by not only murano but a few other projects such as heat and mistral. In heat the library is essential since we introduced yaql function support. Looking at gerrit groups, I noticed the yaql library is maintained by a very small core group[1] and release group[2], but I'm afraid most of the people in these groups are no longer active in the community. Because heat is dependent on the library, I'm wondering if some of the heat cores can be added to these two groups so that we (at least I) can help maintaining the library. I've checked the changes merged into murano repo for these two years but iiuc all of these changes are gate fix. Also a dummy change[3] indicates that its CI is currently broken. If the murano project is no longer active then I'm also willing to take over yaql and bring it to heat's governance (of cause only if it's acceptable). I'll add the current PTL as cc, but please let me know if anyone has any opinion or concern. # I'll add mistral tag because the project is also dependent on yaql. # Also tc is added because this discussion is related to project governance. Thank you Takashi Kajinami [1] https://review.opendev.org/admin/groups/cba4f6fd54c3cc0d5706fc50b5ebd758860… [2] https://review.opendev.org/admin/groups/d5e894b34e5ab5a9fc2938a0d4e7bc76fd2… [3] https://review.opendev.org/c/openstack/murano/+/901888

3 7

[nova][release][tooz] Hold your rechecks
by Sylvain Bauza 10 Jan '24

10 Jan '24

Hey folks, FWIW, our grenade check on SLURP upgrades is 100% failing now [1] due to a behavioural change in the tooz library [2] that's pulled by Cinder and which was released [3] and delivered to upper-contraints yesterday [4] There are different possibilities in order to unblock the gate, but until one of them is agreed and merged, please avoid wasting our CI resources by asking to recheck for something which will fail. Thanks, -Sylvain (who will send an email once the job is back up) [1] https://zuul.opendev.org/t/openstack/builds?job_name=grenade-skip-level-alw… [2] https://review.opendev.org/c/openstack/tooz/+/891355 [3] https://review.opendev.org/c/openstack/releases/+/899966 [4] https://review.opendev.org/c/openstack/requirements/+/901131

4 6

[designate] Proposal to deprecate the agent framework and agent based backends
by Michael Johnson 09 Jan '24

09 Jan '24

TLDR: The Designate team would like to deprecate the backend agent framework and the agent based backends due to lack of development and design issues with the current implementation. The following backends would be deprecated: Bind9 (Agent), Denominator, Microsoft DNS (Agent), Djbdns (Agent), Gdnsd (Agent), and Knot2 (Agent). Designate includes many backend DNS server drivers[1], many of which are "native" (also known as xfr type backends) backend implementations. In addition to the "native" backends, Designate has an agent backend[2] that supports other backends via an agent process. To quote the agent backend documentation[2]: This backend uses an extension[3] of the DNS protocol itself to send management requests to the remote agent processes, where the requests will be actioned. The rpc traffic between designate and the agent is both unauthenticated and unencrypted. Do not run this traffic over unsecured networks. Here are the reasons we are proposing to deprecate the agent framework now: 1. The agent protocol used by Designate is using an "unassigned"[4][5] DNS opcode (14) that is causing problems with the dnspython library >= 2.3.0 which is now validating the opcode when building DNS messages. It is a bad practice to use "unassigned" values as they may be officially assigned at any time, likely with an incompatible message format. 2. The agent backends are not tested in the OpenStack jobs[1]. 3. Many of the agent backends have been marked as "Experimental" since 2016 with no additional contributions beyond general repository code maintenance. 4. The protocol between the Designate worker process and the agent process is unauthenticated and unencrypted. 5. We do not know of a development resource to rewrite the agent framework protocol to address issue #1 and #4 above. 6. The introduction of catalog zones[6] may eliminate the need for some of the agent based backend drivers. By marking the agent framework and agent based backends "deprecated" in the Antelope cycle, we would remove the code no earlier than the "C" release of OpenStack (per the OpenStack deprecation policy[7]). In the meantime, issue #1 has been worked around by overriding the dnspython opcode validation[7] as needed in the Designate code (similar to a monkey patch). This is not a sustainable long term solution. The following backend agent based drivers would be marked "deprecated" in addition to the agent framework itself: Bind9 (Agent) Denominator Microsoft DNS (Agent) Djbdns (Agent) Gdnsd (Agent) Knot2 (Agent) We plan to propose patches for the deprecation over the next week, but will not merge them until at least January 24th to allow time for comment from the community. If you have concerns about this deprecation plan or are interested in rewriting the agent framework protocol to address the above issues, please reply to this announcement. Michael [1] https://docs.openstack.org/designate/latest/admin/support-matrix.html [2] https://docs.openstack.org/designate/latest/admin/backends/agent.html [3] https://github.com/openstack/designate/blob/master/designate/backend/privat… [4] https://www.rfc-editor.org/rfc/rfc6895.html#section-2.2 [5] https://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-pa… [6] https://www.ietf.org/archive/id/draft-ietf-dnsop-dns-catalog-zones-08.txt [7] https://docs.openstack.org/project-team-guide/deprecation.html [8] https://review.opendev.org/c/openstack/designate/+/870678

3 13

[TC][Monasca] Proposal to mark Monasca as an inactive project
by Sławek Kapłoński 04 Jan '24

04 Jan '24

Hi, I just proposed patch [1] to mark Monasca as inactive project. It was discussed during last TC meeting on 03.10.2023. Reasons for that are described in the commit message of the [1] but I will also put all of it here: previous cycle there wasn't almost any contributions to that project and most active contributors in last 180 days were Elod Illes and Dr. Jens Harbott who were fixing some Zuul configuration issues only. Here are detailed statistics about Monasca projects: Validating Gerrit... * There are 7 ready for review patches generated within 180 days * There are 2 not reviewed patches generated within 180 days * There are 5 merged patches generated within 180 days * Unreviewed patch rate for patches generated within 180 days is 28.0 % * Merged patch rate for patches generated within 180 days is 71.0 % * Here's top 10 owner for patches generated within 180 days (Name/Account_ID: Percentage): - Dr. Jens Harbott : 42.86% - Joel Capitao : 28.57% - Elod Illes : 28.57% Validate Zuul... Set buildsets fetch size to 500 * Repo: openstack/monasca-log-api gate job builds success rate: 82% * Repo: openstack/monasca-statsd gate job builds success rate: 95% * Repo: openstack/monasca-tempest-plugin gate job builds success rate: 81% * Repo: openstack/monasca-common gate job builds success rate: 84% * Repo: openstack/monasca-kibana-plugin gate job builds success rate: 83% * Repo: openstack/monasca-ceilometer gate job builds success rate: 100% * Repo: openstack/monasca-events-api gate job builds success rate: 83% * Repo: openstack/monasca-ui gate job builds success rate: 88% * Repo: openstack/monasca-specs gate job builds success rate: 100% * Repo: openstack/monasca-grafana-datasource gate job builds success rate: 100% * Repo: openstack/monasca-persister gate job builds success rate: 98% * Repo: openstack/monasca-notification gate job builds success rate: 93% * Repo: openstack/monasca-thresh gate job builds success rate: 100% * Repo: openstack/monasca-api gate job builds success rate: 76% * Repo: openstack/monasca-agent gate job builds success rate: 98% * Repo: openstack/python-monascaclient gate job builds success rate: 100% * Repo: openstack/monasca-transform gate job builds success rate: 100% What's next? According to the "Emerging and inactive projects" document [2] if there will be no volunteers who will step up and want to maintain this project before Milestone-2 of the 2024.1 cycle (week of Jan 08 2024) there will be no new release of Monasca in the 2024.1 cycle and TC will discuss if project should be retired. So if You are interested in keeping Monasca alive and active, please reach out to the TC to discuss that ASAP. Thx in advance. [1] https://review.opendev.org/c/openstack/governance/+/897520 [2] https://governance.openstack.org/tc/reference/emerging-technology-and-inact… -- Slawek Kaplonski Principal Software Engineer Red Hat

8 14

[openstack][kolla-ansible] kolla-ansible stucked when reconfigure
by Nguyễn Hữu Khôi 22 Dec '23

22 Dec '23

Hello guys. I am operating an openstack cluster with kolla but sometimes I cannot reconfigure. It stucked at some hosts(gather fact) and I need to restart docker service on the stucked host to continue. I tried to google but I cannot find the root cause. Would you share some experiences on it because my solution causes instances on host to timeout some seconds. Thank you. Nguyen Huu Khoi

2 7

[kolla-ansible][zun] Intention to drop support for Zun for the 2023.1 and path forward
by Jan Gutter 21 Dec '23

21 Dec '23

Hi folks, In yesterday's Kolla IRC meeting we discussed the path forward for Zun [1] and came to the conclusion that it might be better for all involved to drop support for Zun for the 2023.1 release until it can be updated to support the necessary dependencies. More specific details at the end of the message. With this in mind, the plan is to start this process in a week from now, unless a better solution is presented. There is still some time for discussion, please don't hesitate! There are two paths forward after this: If Zun can be updated to support the dependencies during the maintenance timeframe of 2023.1, then support would be restored. If no support is available at the time Caracal releases, however, it will be considered for removal in kolla and kolla-ansible. What this means: Kolla-ansible operators currently running Zun should hold off migration to 2023.1. Any development help would of course be appreciated. Please coordinate with the Zun project to help with development. Details on the dependency problems: * Currently, Zun has an external dependency on Docker 20.x, and uses a feature that has been removed in later versions of Docker. * This Docker feature also relies on an older version of etcd (3.3) * The mitigation [2] is to pin to the old versions of Docker and etcd, but this is not possible with Debian Bookworm hosts. Why this is a problem in Kolla-ansible (and Kolla): * This can't easily be solved by vendoring in an older version of etcd: the migration path it introduces to operators would incur a significant amount of risk. * Host level involvement is also particularly painful, the host version of Docker needs to connect to the etcd service running in the containers. * Even though the containers can be kept buildable and the configuration and inventory settings could be maintained, a working setup is not testable in CI. Thanks very much for everyone's patience, contributions and time! [1]: https://meetings.opendev.org/meetings/kolla/2023/kolla.2023-09-13-13.00.log… [2]: https://bugs.launchpad.net/zun/+bug/2007142

2 2

[all][tc][ptls] Eventlet: Python 3.12, and other concerning discoveries
by Jay Faulkner 20 Dec '23

20 Dec '23

Hi all, For those who aren't aware, eventlet (https://github.com/eventlet/eventlet) is a library that almost every OpenStack project depends on and uses heavily. It's the primary method in most OpenStack project for achieving any form of parallelism via greenthreading. A couple of weeks ago it was brought to my attention, in the #openstack-tc IRC channel, that the eventlet library was broken on python 3.12 due to changes to the SSL stdlib in python 3.12. I enlisted a G-Research Open Source Software (GR-OSS) developer from outside the OpenStack community, Itamar, to help dig into what would be required to get python 3.12 support for eventlet, and asked him to do an overall health check on the project. The results were extremely concerning, and are why I'm emailing the list today. First of all, the original concern -- python 3.12 support -- is being worked on right now; there is a PR up to migrate the SSL module here https://github.com/eventlet/eventlet/pull/817 and a PR up here: https://github.com/eventlet/eventlet/pull/820 to begin migrating from nose3, a deprecated testing framework used by eventlet which does not support python 3.12. It's worth noting that in the past (2020) https://github.com/eventlet/eventlet/issues/638 there was resistance to removing nose for testing due to at-the-time-desired python2.7 support. Even if they are able to be merged, these PRs only scratch the surface of the total effort needed to get eventlet working on python 3.12. Furthermore, activity on the eventlet project is extremely slim right now. There have been no commits to the primary branch in nearly eight months and it's been a single maintainer project for an extremely long time. There are also indications there may be external factors impacting the maintainers' availability. This lack of redundancy on a core library that we have no clear migration path off of is concerning as well. As a large community that uses eventlet; I hope we can improve it. Now we get to the cherry on top -- code quality and existing bugs. When Itamar began evaluating the overall state of the project, he found that approximately 80% of the unit tests were passing. Some of the failing unit tests were valid failures. In fact, one of the failure cases -- around locks not being properly greened on upgrade -- explains an Ironic database migrations unit test failure which we spent several weeks off-and-on debugging last cycle. Along these lines; although eventlet has CI configured; those tests have never passed: https://github.com/eventlet/eventlet/actions/workflows/test.yaml?query=is%3… . I don't have a specific proposal for a solution. I do know that right now, OpenStack services are built "all-in" on eventlet, with no obvious or easy migration path off. At least in the short term, keeping eventlet running well is critical to keeping OpenStack running well. I'm sending this email to raise an alarm about this situation, and to hope that community members can work together to solve the problem. Thanks for reading and your help, Jay Faulkner OpenStack TC Chair

8 15

[zaqar][tc] master and 2023.2 unit tests are broken
by Takashi Kajinami 18 Dec '23

18 Dec '23

Hello, Today I happened to notice that unit tests in zaqar is broken because some tests requires base test class from oslo.db which was removed in 13.0.0 release[1]. The 13.0.0 release of oslo.db was made during 2023.2 cucle so these tests are also broken in stable/2023.2 branch. In addition, py311 job was made voting in master but is broken and we probably need to fix bindep.txt so that it works in Debian 12. I'm sending this mail so that people maintaining the project is aware of the situation. I'll add [tc] tag because if the CI is not fixed then zaqar may become a new candidate for inactive projects. Thank you, Takashi [1] https://review.opendev.org/c/openstack/oslo.db/+/874239

2 1

Cyborg nova reports mdev-capable resource is not available
by Karl Kloppenborg 07 Dec '23

07 Dec '23

Hi Cyborg Team! Karl from Helm Team. When creating a VM with the correct flavor, the mdev gets created by cyborg agent and I can see it in the nodedev-list --cap mdev. However Nova then fails with: nova.virt.libvirt.driver [<removed>- - default default] Searching for available mdevs... _get_existing_mdevs_not_assigned /var/lib/openstack/lib/python3.10/site-packages/nova/virt/libvirt/driver.py :8357 2023-09-21 14:34:47.808 1901814 INFO nova.virt.libvirt.driver [<removed> - - default default] Available mdevs at: set(). 2023-09-21 14:34:47.809 1901814 DEBUG nova.virt.libvirt.driver [<removed> - - default default] No available mdevs where found. Creating an new one... _allocate_mdevs /var/lib/openstack/lib/python3.10/site-packages/nova/virt/libvirt/driv er.py:8496 2023-09-21 14:34:47.809 1901814 DEBUG nova.virt.libvirt.driver [<removed> - - default default] Attempting to create new mdev... _create_new_mediated_device /var/lib/openstack/lib/python3.10/site-packages/nova/virt/libvirt/driver.py:8385 2023-09-21 14:34:48.455 1901814 INFO nova.virt.libvirt.driver [<removed> - - default default] Failed to create mdev. No free space found among the following devices: ['pci_0000_4b_03_1', … <truncated list>]. 2023-09-21 14:34:48.456 1901814 ERROR nova.compute.manager [<removed> - - default default] [instance: 2026e2a2-b17a-43ab-adcb-62a907f58b51] Instance failed to spawn: nova.exception.ComputeResourcesUnavailable: Insufficient compute resources: mdev-capable resource is not available. Once this happened, ARQ removes the mdev and cleans up. I’ve got Cyborg 2023.2 running and have a device profile like so: karl@Karls-Air ~ % openstack accelerator device profile show e2b07e11-fe69-4f33-83fc-0f9e38adb7ae +-------------+---------------------------------------------------------------------------+ | Field | Value | +-------------+---------------------------------------------------------------------------+ | created_at | 2023-09-21 13:30:05+00:00 | | updated_at | None | | uuid | e2b07e11-fe69-4f33-83fc-0f9e38adb7ae | | name | VGPU_A40-Q48 | | groups | [{'resources:VGPU': '1', 'trait:CUSTOM_NVIDIA_2235_A40_48Q': 'required'}] | | description | None | +-------------+---------------------------------------------------------------------------+ karl@Karls-Air ~ % I can see the allocation candidate: karl@Karls-Air ~ % openstack allocation candidate list --resource VGPU=1 | grep A40 | 41 | VGPU=1 | 229bf15f-5689-3d2c-b37b-5c8439ea6a71 | VGPU=0/1 | OWNER_CYBORG,CUSTOM_NVIDIA_2235_A40_48Q | karl@Karls-Air ~ % Am I missing something critical here? Because I cannot seem to figure this out… have I got a PCI address wrong, or something? Any help from the Cyborg or Nova teams would be fantastic. Thanks, Karl.

4 9

[openstack-ansible] overriding host vars for compute_hosts
by pi3.14＠tuta.io 06 Dec '23

06 Dec '23

Hey folks, Unfortunately, I am not able to specify host specific variables for the compute hosts. I am trying to specify the `nova_user_ssl_*` variables for each compute node. When these variables are specified in `user_variables.yml` and then specified in `openstack_user_config.yml`, they don't actually end up overriding the variables. But they are recognised correctly in `openstack_inventory.json`. When I remove the variables from `user_variables.yml`, everything works correctly. Is it not possible to specify general variables in `user_variables.yml` and then overwrite them in `openstack_user_config.yml`? Example for `openstack_user_config.yml` (same Problem when using `host_vars` instead of `container_vars`): ``` compute_hosts: compute1: ip: 192.168.1.2 container_vars: nova_user_ssl_cert: "/path/to/cert1" nova_user_ssl_key: "/path/to/key1" nova_user_ssl_ca_cert: "/path/to/ca1" ``` thanks Roby

2 1

[cinder] 2024.1 (Caracal) R-17 virtual mid cycle (6 Dec, 2023)
by Rajat Dhasmana 06 Dec '23

06 Dec '23

Hello Argonauts, We will be conducting the first midcycle of 2024.1 (Caracal) on 6th December, 2023. Following are the details: Date: 6th December, 2023 Time: 1400-1600 UTC Meeting link: https://meet.google.com/auq-jiem-zxy Etherpad: https://etherpad.opendev.org/p/cinder-caracal-midcycles We have 2 weeks so please add your topics timely. Thanks Rajat Dhasmana

1 1

[cinder][nova][glance][ironic] restricting image metadata values to 255 chars
by Jorge Merlino 05 Dec '23

05 Dec '23

Hello stackers, It has come to our attention recently that nova, cinder, and glance treat image properties differently. This came up in a discussion on a patch to extend the allowable length of image metadata values in cinder [0]. Briefly: - glance allows image property values to be unrestricted in the schema, but effectively limited to 65535 bytes by the database. - cinder restricts the length of an image property value to 255 chars (by request schema) if you try to update the volume_image_properties on a volume, but if you create a volume from an image, cinder happily copies over all the image properties from glance, giving them an effective limit of 65535 bytes. - nova mostly truncates image properties values to 255 chars (it's a bit more complicated, but we can consider that to be nova's behavior for the purposes of this discussion). (We're not sure what ironic does, but they're in the subject line as a consumer of images and volumes.) Note that we're talking about metadata *values* here; the metadata keys are already restricted by charset to basically US-ASCII and 255 length. Values are allowed to be unicode. The point of this email is that it would be good for the services to be consistent about image metadata values. Thus, we propose that all services should restrict image metadata values to 255 unicode characters. (Which is sort of happening already, but not consistently.) The further point of this email is to find out what the impact of this restriction would be on current users. So please respond if you have a use case that would be affected by this change, and could not be addressed by, for example, instead of having one enormous value for a single key, the metadata was broken into a number of key/value pairs that would satisfy the 255 char restriction. Thanks for your attention to this! [0] https://review.opendev.org/c/openstack/cinder/+/868485

2 2

A few questions about OpenStack projects archival strategy
by arabat50＠gmail.com 04 Dec '23

04 Dec '23

Dear OpenStack team, I hope this email finds you well. I am Ali Arabat, a PhD student in Software Engineering at École de Technologie Supérieure in Montreal, University of Quebec, Canada, conducting research studies on the evolution of multi-component systems, among which OpenStack plays a significant role. Through this email, we would like to ask a few questions related to our study on OpenStack. Our study revealed a significant increase in the number of cross-component changes over time. However, Such cross-component changes have decreased after archiving a large number of projects beyond 500. Therefore, we would like to have clarification and answers to a few questions as follows: What are the main factors in archiving OpenStack projects? Are there any policies established by OpenStack to archive such projects i.e., end of life? Who generally decides to abandon a given project? We highly value your input and we genuinely appreciate your time. Thank you for considering our request, and we look forward to your valuable input. Best regards, --------------------------------------- Ali Arabat Ph.D. student in Software Engineering Department of Software Engineering and IT École de Technologie Supérieure (ÉTS) | University of Quebec 1100, rue Notre-Dame Ouest, Montréal, QC H3C 1K3, Canada

2 1

[ironic] multi-conductor architecture, standalone and DHCP
by Dmitry Tantsur 01 Dec '23

01 Dec '23

Hi folks, This is detailed context on the discussions we've had recently about multi-conductor in metal3. I'm sending it to potentially interested people and cc'ing the openstack ML. The metal3 side is https://github.com/dtantsur/ironic-operator/issues/3 (although that covers a few more different issues). In metal3 we have Ironic without Neutron (or really any other OpenStack components). So far, we have only supported a single Ironic instance in a cluster, but we want to move towards a multi-conductor setup where every Kubernetes control plane node will host an Ironic (so, 3 Ironics in a normal deployment). The biggest problem stems from DHCP for the provisioning network. With Neutron, Ironic can configure it to direct a node to boot from a specific iPXE server. With Metal3, we have a static DHCP configuration. If we keep it the way it is, it will always direct a node to boot from the iPXE server on the same machine as dnsmasq (regardless of how many dnsmasq replicas we run). This has to be changed. I see several options, none of which are straightforward. (1) iPXE-level fix: boot config API This is what https://bugs.launchpad.net/ironic/+bug/2044561 proposes. If we stop using static iPXE scripts and start going through the Ironic API instead, Ironic can reach out to the correct conductor internally, always serving the right script. (2) dnsmasq DHCP implementation Ironic now has a non-neutron managed DHCP implementation through DHCP host and options files: https://opendev.org/openstack/ironic/src/branch/master/ironic/dhcp/dnsmasq.…. This could be a half of the solution. Since Metal3 does not support new node auto-discovery, we can run 3 copies of dnsmasq with dhcp-ignore=!known and rely on this DHCP provider to configure only 1 dnsmasq for each node. The other 2 will ignore the requests. The problem is in the DHCP range. As far as I understand, the 3 dnsmasqs must be configured with disjoint ranges to prevent leases from clashing. This seems non-trivial with Kubernetes which expects to create identical pods. Adam has suggested using annotations from inside ironic-operator, which could work if we find a way to read them inside the pod after it has started (which seems to pose a chicken-and-egg problem). Other workarounds are possible if we go down this path. E.g. ironic-operator could split the DHCP range and creating a mapping hostIP:subrange,hostIP2:subrange2 and pass it to pods. Then each pod will pick its subrange based on its IP address. Huge downside: every time a Kubernetes control plane node is replaced or changes its IP, the whole Ironic installation will get restarted. (2.1) Pre-created leases Another Metal3 contributor has suggested requiring an IPAM implementation (metal3 actually has one) that will create leases centrally, allowing us to use the same DHCP range. The only problem: how to pass them to dnsmasq in runtime without restarting all pods? We could probably have a small sidecar container next to dnsmasq that watches the Kubernetes API for new leases in IPAM. Or... (2.2) Dynamic DHCP and Kea The same contributor is working on Kea support for their deployment: https://hackmd.io/@7RNIJtmvSIeNpSOMTW9oqA/SkWhyr7Hp. There seem to be limitations in the free version, which caused them to write a tiny downstream plugin: https://gitlab.com/Orange-OpenSource/kanod/kanod-kea/-/blob/controlled-leas…. Changing the DHCP server is a dramatic step, I'm not sure if our small community can afford that. It may also pose problems for downstreams like OpenShift, requiring Metal3 to support both servers in the long run. Any thoughts are welcome. Dmitry

3 3

[neutron] Neutron drivers meeting
by Brian Haley 30 Nov '23

30 Nov '23

Hello Neutrinos, Please remember tomorrow (Friday) we have a Neutron drivers meeting. This is the agenda: https://wiki.openstack.org/wiki/Meetings/NeutronDrivers There is currently one topic: * [RFE] Use call_monitor_timeout of oslo.messaging RPCClient instead of custom backoff mechanism and hardcoded timeouts https://bugs.launchpad.net/neutron/+bug/2045058 Thanks, -Brian

1 0

[OpenInfra Live]: PTG Recap, Dec 7 at 15 UTC
by Kristin Barrientos 30 Nov '23

30 Nov '23

Hi everyone, Thanks for watching this week's episode of OpenInfra Live, featuring Zvonko Kaiser from NVIDIA. In case you missed it, you can find it here: https://www.youtube.com/live/urHjDdtuIa4?feature=shared Tune in next week for another OpenInfra Live, brought to you by the OpenStack and StarlingX community! Episode: Join us for a Project Teams Gathering (PTG) recap! Project leaders from Ironic, Technical Committee, Nova, Sunbeam, Manila, StarlingX and Neutron will provide recaps from discussions held during the PTG. Date and time: Thursday, Dec 7, 15 UTC YouTube: https://www.youtube.com/live/thidlQGX29M?feature=shared LinkedIn: https://www.linkedin.com/events/7132754094531747840/comments/ WeChat: The recording will be posted on OpenInfra Foundation WeChat after the live stream Speakers: Kendall Nelson, Jay Faulkner, Sylvain Bauza, James Page, Carlos Eduardo, Steve Geary and Brian Haley Thanks, Kristin Barrientos Marketing Coordinator OpenInfra Foundation

1 0

"openstack usage list" doesn't return information about all projects
by Michel Jouvin 30 Nov '23

30 Nov '23

Hi, We are using "openstack usage list" to follow resource usage by projects at our cloud. We recently discovered that ~1/3 of the resource consumed (mostly "big projects") are missing from the JSON/CSV produced where the Admin Overview menu in the Horizon dashboard displays everything. Is there a trivial reason for this? We tried both with a pretty old openstackclient (5.8) and the last one after applying the patch in https://github.com/openstack/python-openstackclient/commit/30462f57d48162d1… to fix the problem with date conversion. The result is the same. Thank you in advance for any help. Cheers, Michel

5 15

openstack Vm shutoff by itself
by AJ_ sunny 30 Nov '23

30 Nov '23

Hi team, I am using openstack kolla ansible on wallaby version and currently I am facing issue with virtual machine, vm is shutoff by itself and and from log it seems libvirt lifecycle stop event triggering again and again Logs:- 2023-10-16 08:48:10.971 7 WARNING nova.compute.manager [req-c7b731db-2b61-400e-917f-8645c9984696 f226d81a45dd46488fb2e19515 848 316d215042914de190f5f9e1c8466bf0 default default] [instance: 4b04d3f1-1fbd-4b63-b693-a0ef316ecff3] Received unexpected - vent network-vif-plugged-f191f6c8-dff5-4c1b-94b3-8d91aa6ff5ac for instance with vm_state active and task_state None. 2023-10-21 22:42:44.589 7 INFO nova.compute.manager [-] [instance: 4b04d3f1-1fbd-4b63-b693-a0ef316ecff3] VM Stopped (Lifecyc Event) 2023-10-21 22:42:44.683 7 INFO nova.compute.manager [req-1d99b87b-7ff7-462d-ab18-fbdec6bda71d -] [instance: 4b04d3f1- fbd-4b63-b693-a0ef316ecff3] During _sync_instance_power_state the DB power_state (1) does not match the vm_power_state from ti e hypervisor (4). Updating power_state in the DB to match the hypervisor. 2023-10-21 22:42:44.811 7 WARNING nova.compute.manager [req-1d99b87b-7ff7-462d-ab18-fbdec6bda71d ----] [instance: 4b04d3f 1-1fbd-4b63-b693-a0ef316ecff3] Instance shutdown by itself. Calling the stop API. Current vm_state: active, current task_state : None, original DB power_state: 1, current VM power_state: 4 2023-10-21 22:42:44.977 7 INFO nova.compute.manager [req-1d99b87b-7ff7-462d-ab18-fbdec6bda71d -] [instance: 4b04d3f1-1 fbd-4b63-b693-a0ef316ecff3] Instance is already powered off in the hypervisor when stop is called. Thanks & Regards Arihant Jain +91 8299719369

5 15

How do I query the distribution versions of Nova and Neutron for openstack that have been configured？
by qq597399721＠163.com 30 Nov '23

30 Nov '23

How do I query the distribution versions of Nova and Neutron for openstack that have been configured？ I have tried using the "nova -- version" and "neutron -- version" commands, but the results of the commands show their CLI version, which is not their actual release version. I hope someone can help me find the correct command or path, thank you!

2 1

Failed to allocate the network(s), not rescheduling].
by kjme001＠gmail.com 29 Nov '23

29 Nov '23

hello, when it tries to create instances it gets an error message: Failed to allocate the network(s), not rescheduling]. as it restarts the openstack node it is already possible to create an instance without this error. What could be the reason, does anyone have an idea? Maybe someone will suggest something Greetings

2 2

[openstack][octavia] amphora cannot live migrate
by Nguyễn Hữu Khôi 29 Nov '23

29 Nov '23

Hello everyone. I deploy amphora instances using shared storage but when I do live migrate it to another host, I encounter this error. *Error: *Failed to live migrate instance to host "AUTO_SCHEDULE". Details <https://cloudhn.fpt.net/admin/instances/#message_details> compute12 is not on shared storage: Shared storage live-migration requires either shared storage or boot-from-volume with no local disks Woud we have a solution for this? Thank you. Nguyen Huu Khoi

3 11

Seeking Advice on Optimal Linux Distribution for OpenStack Installation
by Sait, Abubakur Abdulgader S 29 Nov '23

29 Nov '23

Hello All, I'm currently pursuing my PhD and my research involves utilizing OpenStack. I've encountered some challenges while attempting to install it on Ubuntu 22.04. I'd greatly appreciate it if you could recommend the most reliable Linux Distribution (along with the version) that has worked well for you. Additionally, any up-to-date tutorial suggestions for installing OpenStack would be incredibly helpful, as many of the resources I've come across seem to be outdated. Thanks for your assistance! Best regards, Bakursait

2 1

Cinder Bug Report 2023-11-29
by Jon Bernard 29 Nov '23

29 Nov '23

Hello Argonauts, Cinder Bug Meeting Etherpad <https://etherpad.opendev.org/p/cinder-bug-squad-meeting> Undecided - Virtual machine cannot unload data disk <https://bugs.launchpad.net/cinder/+bug/2044313> - Status: New Thanks, -- Jon

1 0

[neutron] Review day(s)
by Brian Haley 29 Nov '23

29 Nov '23

Hi Neutrinos, In our PTG and past weeks' meetings I've brought-up setting aside a day or two for us to prioritize merging some of our in-flight reviews, which currently number ~150 [0][1][2] just in the neutron* repositories. I'm hoping it will both help with our bug count as well as make neutron more stable, since a lot are fixing issues and/or adding new tests. I'm proposing we do this over the next two weeks if possible, I've made a doodle to gather responses at [3], that way we can try and coordinate reviewing and the inevitable re-factor time that comes along with merging code. Think of it as an early Christmas present :) Thanks for participating! -Brian, Neutron PTL [0] https://review.opendev.org/q/project:openstack%252Fneutron+branch:master+st… [1] https://review.opendev.org/q/project:openstack/neutron-lib+branch:master+st… [2] https://review.opendev.org/q/project:openstack/neutron-tempest-plugin+branc… [3] https://doodle.com/meeting/participate/id/dN8opRDa

1 1

[magnum] Weekly Meeting Cancelled - 29 Nov 2023
by Jake Yip 28 Nov '23

28 Nov '23

Hi all, Apologies for cancelling this week's meeting due to a clash. If you have a discussion topic, please add them to the agenda, and we will get to them next week. Regard, Jake

1 0

A questionnaire for unmaintained package users
by smoncaff＠gmail.com 28 Nov '23

28 Nov '23

1 0

Re: [Heat][requirements] Possible feature backport to stable branches
by Martin Magr 27 Nov '23

27 Nov '23

On Mon, Nov 13, 2023 at 4:50 PM Martin Magr <mmagr(a)redhat.com> wrote: > Adding more folks from requirements core to CC. > And also correct mailing list. I'm sorry for the noise. > > On Mon, Nov 13, 2023 at 4:32 PM Martin Magr <mmagr(a)redhat.com> wrote: > >> Greetings, >> >> we have introduced new feature to Aodh [1][2] (which introduced new >> dependency [3]) and Heat [4] recently. >> The changes to both projects are relatively small, it just added >> new respective resources and did not change >> existing logic. Also the new dependency is providing functionality to >> those new resources. >> >> We are building our product on stable/antelope and so ideal state for us >> would be to have those changes >> included in this branch also on upstream side. I'm aware that Heat >> follows stable branch policy and it's written >> in requirements documentation, that new dependency cannot be added in >> stable ranches, but before we are >> going to start building workarounds on this I'd like to ask if there is >> any chance of getting exception >> (given the fact that changes are pretty safe) on backporting the Heat >> patch down to stable/antelope >> and(or at least) including the new dependency in stable/antelope. >> >> Thanks for answer in advance, >> Martin >> >> [1] https://review.opendev.org/c/openstack/aodh/+/890529 >> [2] https://review.opendev.org/c/openstack/python-aodhclient/+/893319 >> [3] https://review.opendev.org/c/openstack/requirements/+/891291 >> [4] https://review.opendev.org/c/openstack/heat/+/893673 >> >> -- >> Martin Mágr >> Principal Software Engineer - Service Telemetry Framework >> Red Hat Czech >> > > -- Martin

5 6

[largescale-sig] Next meeting: Nov. 29, at 16UTC
by Kristin Barrientos 27 Nov '23

27 Nov '23

Hi everyone, The Large Scale SIG will be meeting this Wednesday in #openstack-operators on OFTC IRC, at 16UTC. Feel free to add topics to the agenda: https://etherpad.opendev.org/p/large-scale-sig-meeting Thanks, Kristin Barrientos Marketing Coordinator OpenInfra Foundation

1 0

[tc] Next Technical Committee Meeting Nov 28 1800 UTC
by Jay Faulkner 27 Nov '23

27 Nov '23

Hi all, The next weekly meeting of the Technical Committee is tomorrow, November 28, at 1800 UTC. It will be held in #openstack-tc in OFTC. Agenda - Roll call - Follow up on tracked action items: https://meetings.opendev.org/meetings/tc/2023/tc.2023-11-07-18.00.html - Rosmaita to propose amendment to unmaintained branch resolution allowing a single review group - Rosmaita to email mailing list about progress implementing unmaintained branch resolution - Gate health check - Leaderless projects (gmann) - Implementation of Unmaintained branch statuses - 2024.1 TC Tracker - https://etherpad.opendev.org/p/tc-2024.1-tracker - Upgrade issue between tooz and cinder - https://review.opendev.org/c/openstack/requirements/+/901131 - https://lists.openstack.org/archives/list/openstack-discuss@lists.openstack… - Declare projects inactive for lack of ...? - Working py311 unit tests - Support for sqla2 - Broken CI since 2023.2 release - Do we want/need to look at specific deliverables or only whole projects? - Open Discussion and Reviews Thanks, Jay Faulkner TC Chair

1 0

[all] North Dakota State University Student Opportunity
by Kendall Nelson 27 Nov '23

27 Nov '23

Hello All! I was contacted by a professor at North Dakota State University wondering if there were projects in OpenStack that students could work on over the course of the coming semester (Jan -May). The students will be nearing the end of their Bachelors degree (this course being one of the final requirements to graduate) so should be relatively knowledgeable and adept and picking up the technologies required if they aren't already versed in them. If you have an idea for a project that you would want to work with a group of students on, please let me know ASAP. I will get you connected with the professor. Project descriptions are due to the professor by December 1st so we only have a couple weeks to get them together. Anyone interested? -Kendall Nelson Senior Upstream Developer Advocate OpenInfra Foundation

1 2

Is "nova-manage db online_data_migrations" cumulative across versions?
by Michel Jouvin 27 Nov '23

27 Nov '23

Hi, We realized that after a Stein -> Train upgrade of our cloud, we forgot to run "nova-manage db online_data_migrations" and did the Train -> Ussuri upgrade. We have not seen any bad side effect but where wondering if the online_data_migrations was cumulative across versions and if running it under Ussuri fixed potential changes related to Stein -> Train upgrade that we forgot to fix right after the Train upgrade. If not, are there things to do to cleanup the situation? Cheers, Michel

2 1

[neutron] Bug Deputy Report Nov 20-26
by Oleg Bondarev 27 Nov '23

27 Nov '23

Hello Neutron Team, Easy week, as usual for me :P 1 bug is undecided, more info requested, others are on track or fixed. Critical ----- - https://bugs.launchpad.net/neutron/+bug/2043959 - Unit test jobs with neutron-lib master(3.9.0) failing - Fix released: https://review.opendev.org/c/openstack/neutron/+/901430 - Fixed by yatinkarel High ----- - https://bugs.launchpad.net/neutron/+bug/2044272 - Inconsistent IGMP configuration across drivers - In progress: https://review.opendev.org/c/openstack/neutron/+/901753 - assigned to lucasagomes Medium ----- - https://bugs.launchpad.net/neutron/+bug/2044171 - External shared networks may not be seen by other projects - Invalid, not relevant for master ( https://review.opendev.org/c/openstack/neutron-lib/+/901565 closed) - handled by libosvar - https://bugs.launchpad.net/neutron/+bug/2044484 - Enabling DHCP after setting the subnet's 'enable_dhcp' to false does not recreate the metadata namespace - In progress https://review.opendev.org/c/openstack/neutron/+/901812 - assigned to huanghailun Undecided ----- - https://bugs.launchpad.net/neutron/+bug/2044215 - dns: Keyword is replaced by project_name instead of project_id - Incomplete, more info requested Thanks, Oleg

1 0

[cinder][kolla][OpenstackAnsible] 2023.2 Bobcat cycle-trailing release deadline
by Elõd Illés 27 Nov '23

27 Nov '23

Hello teams with trailing projects, The 2023.2 Bobcat cycle-trailing release deadline is in ~1 months [1], and all projects following the cycle-trailing release model must release their 2023.2 Bobcat deliverables by December 7th, 2023. The following trailing projects haven't been released yet for 2023.2 Bobcat (aside the release candidates versions if exists). Cinder team's deliverables: - cinderlib OSA team's deliverables: - openstack-ansible-roles - openstack-ansible Kolla team's deliverables: - kayobe - kolla - kolla-ansible - ansible-collection-kolla This is just a friendly reminder to allow you to release these projects in time. Do not hesitate to ping us if you have any questions or concerns. [1] https://releases.openstack.org/caracal/schedule.html#c-cycle-trail Thanks, Előd irc: elodilles @ #openstack-release

1 1