August 2022 - openstack-discuss - lists.openstack.org

[all][tc] Technical Committee next weekly meeting on 2022 Aug 25 at 1500 UTC
by Ghanshyam Mann 24 Aug '22

24 Aug '22

Hello Everyone, Below is the agenda for Tomorrow's TC meeting schedule at 1500 UTC. https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting * Roll call * Follow up on past action items * Gate health check ** Bare 'recheck' state *** https://etherpad.opendev.org/p/recheck-weekly-summary * 2023.1 cycle PTG Planning ** Schedule 'operator hours' as a separate slot in PTG(avoiding conflicts among other projects 'operator hours') * 2023.1 cycle Technical Election * Open Reviews ** https://review.opendev.org/q/projects:openstack/governance+is:open -gmann

1 0

container and instances are not working on my dashboard
by Lee, Vincent Z 24 Aug '22

24 Aug '22

Hi all, I am quite new to Openstack and faced some issues with creating instances and displaying created containers on my Openstack dashboard. I am currently working on multinode Openstack. I am hoping to get some helps and feedbacks about this. I will briefly go through the problems I encountered. When I created an instances on my dashboard, it directly went into error state. I have attached a screenshot as shown below. [cid:c1615736-e4b3-4100-99c0-dfb970ff365f] This is my list of hosts. [cid:8d2f9138-27fd-4cf5-95ca-0cd9038f723c] When I created a container using both cli and dashboard, two containers were running. However, when I tried to look into my dashboard, those containers were not shown. These are the created containers. [cid:61d517f2-c60a-4892-bf88-1a9e0d763b7f] However, when i try to open my dashboard and look for them, they just don't appear on it. So I am not sure what is causing this. [cid:fb9d0f7e-1afa-48c1-bc92-9c8054382b55] Hope to hear from everyone soon. Best regards, Vincent

3 2

[all][elections][ptl][tc] Combined PTL/TC Antelope cycle Election Nominations Kickoff
by Amy Marrich 24 Aug '22

24 Aug '22

Apologies all for the lack of notice to the start of the PTL/TC election season. Unfortunately we are starting late and we are attempting to get back on schedule. We will make sure we send out a reminder notice (or two) for nominations closing. Remember we can't do this without your nominations and folks being willing to lead the projects and the community ======================================================================== Nominations for OpenStack PTLs (Project Team Leads) and TC (Technical Committee) positions (4 positions) are now open and will remain open until Aug 31, 2022 23:45 UTC. All nominations must be submitted as a text file to the openstack/election repository as explained at https://governance.openstack.org/election/#how-to-submit-a-candidacy Please make sure to follow the candidacy file naming convention: candidates/antelope/<Project_Name or "TC">/<email_address> (for example, "candidates/antelope/TC/stacker(a)example.org"). The name of the file should match an email address for your current OpenStack Foundation Individual Membership. Take this opportunity to ensure that your OSF member profile contains current information: https://www.openstack.org/profile/ Any OpenStack Foundation Individual Member can propose their candidacy for an available, directly-elected seat on the Technical Committee. In order to be an eligible candidate for PTL you must be an OpenStack Foundation Individual Member. PTL candidates must also have contributed to the corresponding team during the Zed to Antelope timeframe, Sep 17, 2021 00:00 UTC - Aug 31, 2022 00:00 UTC. Your Gerrit account must also have a verified email address matching the one used in your candidacy filename. Both PTL and TC elections will be held from Sep 07, 2022 23:45 UTC through to Sep 14, 2022 23:45 UTC. The electorate for the TC election are the OpenStack Foundation Individual Members who have a code contribution to one of the official teams over the Zed to Antelope timeframe, Sep 17, 2021 00:00 UTC - Aug 31, 2022 00:00 UTC, as well as any Extra ATCs who are acknowledged by the TC. The electorate for a PTL election are the OpenStack Foundation Individual Members who have a code contribution over the Zed to Antelope timeframe, Sep 17, 2021 00:00 UTC - Aug 31, 2022 00:00 UTC, in a deliverable repository maintained by the team which the PTL would lead, as well as the Extra ATCs who are acknowledged by the TC for that specific team. The list of project teams can be found at https://governance.openstack.org/tc/reference/projects/ and their individual team pages include lists of corresponding Extra ATCs. Please find below the timeline: PTL + TC nomination starts @ Aug 24, 2022 23:45 UTC PTL + TC nomination ends @ Aug 31, 2022 23:45 UTC TC campaigning starts @ Aug 31, 2022 23:45 UTC TC campaigning ends @ Sep 07, 2022 23:45 UTC PTL + TC elections start @ Sep 07, 2022 23:45 UTC PTL + TC elections end @ Sep 14, 2022 23:45 UTC Shortly after election officials approve candidates, they will be listed on the https://governance.openstack.org/election/ page. The electorate is requested to confirm their email addresses in Gerrit prior to 2022-08-31 00:00:00+00:00, so that the emailed ballots are sent to the correct email address. This email address should match one which was provided in your foundation member profile as well. Gerrit account information and OSF member profiles can be updated at https://review.openstack.org/#/settings/contact and https://www.openstack.org/profile/ accordingly. If you have any questions please be sure to either ask them on the mailing list or to the elections officials: https://governance.openstack.org/election/#election-officials

1 0

[TripleO] Derived Parameters going away
by John Fulton 24 Aug '22

24 Aug '22

It seems this feature was not widely adopted so the current maintainers would like to remove it. We have a proposed patch [1] to remove it from the main branch so it won't be in the TripleO release which accompanies Zed. It's presently in the release which accompanies Wallaby. Note that TripleO is using the independent release model [2]. What is the "Derived Parameters" feature? NFV and HCI overclouds require system tuning. There are formulas which output tuning parameters based on hardware. These parameters may then be provided as input to TripleO to deploy a tuned overcloud. There is an additional method of system tuning called “derived parameters” where TripleO uses inspected hardware data as input and automatically sets tuning parameters [3]. Removing this feature shouldn't block anyone since they can still deploy a tuned overcloud by providing standard parameters. There's also a docs patch [4] explaining how to migrate away from derived to standard parameters. John [1] https://review.opendev.org/q/topic:derive-parameters-cleanup [2] https://review.opendev.org/c/openstack/tripleo-specs/+/801512 [3] https://specs.openstack.org/openstack/tripleo-specs/specs/pike/tripleo-deri… [4] https://review.opendev.org/c/openstack/tripleo-docs/+/854443

1 0

OpenInfra Live - August 25 at 1400 UTC
by Allison Price 24 Aug '22

24 Aug '22

Hi everyone, This week’s OpenInfra Live episode is brought to you by members of the OpenStack community. Episode: Making VDI a first-class citizen in the OpenStack world Learn the importance of having a Virtual Desktop Infrastructure (VDI) with OpenStack. Get to know the VDI use cases. Discover which relevant features are already integrated and which are still missing. You’ll also have the opportunity to meet Bumblebee and enjoy the cute flying insect during a demo! Date and time: Thursday, August 25 at 1400 UTC (9am CT) You can watch us live on: YouTube: https://www.youtube.com/watch?v=juczRNlfg6c <https://www.youtube.com/watch?v=juczRNlfg6c> LinkedIn: https://www.linkedin.com/video/event/urn:li:ugcPost:6966050226767884289/ <https://www.linkedin.com/video/event/urn:li:ugcPost:6966050226767884289/> Facebook: https://www.facebook.com/104139126308032/posts/5359387687449790/ <https://www.facebook.com/104139126308032/posts/5359387687449790/> WeChat: recording will be posted on OpenStack WeChat after the live stream Speakers: Manuel Bentele Andy Botting Radosław Piliszek Have an idea for a future episode? Share it now at ideas.openinfra.live <https://openinfrafoundation.formstack.com/forms/openinfralive>. See you there! Allison

1 0

[neutron][ovn] Gauging community interest in supporting a masquerading forwarding DNS resolver for isolated tenant networks
by Miguel Lavalle 24 Aug '22

24 Aug '22

Hi, As described in this Launchpad bug https://bugs.launchpad.net/neutron/+bug/1902950, in contrast with ML2 / OVS, with ML2 / OVN there is not a masquerading forwarding DNS resolver available to instances on isolated tenant networks. The purpose of this message is to gather feedback from the community as to how much interest there is in providing this functionality under ML2 / OVN. If your organization has interest, please respond to this thread. Even better, register your interest on the topic in the etherpad for the upcoming Antelope PTG (https://etherpad.opendev.org/p/neutron-antelope-ptg) under the "Check of interest on closing ML2/OVN DNS gaps" topic. And of course, attend the conversation in October Best regards Miguel Lavalle

1 0

(no subject)
by ralonsoh＠redhat.com 24 Aug '22

24 Aug '22

The original message was received at Wed, 24 Aug 2022 22:48:10 +0900 from redhat.com [7.150.121.148] ----- The following addresses had permanent fatal errors ----- <openstack-discuss(a)lists.openstack.org>

1 0

High memory use with RabbitMQ on RHEL9 hosts
by Marcin Juszkiewicz 24 Aug '22

24 Aug '22

If you run RabbitMQ on RHEL9 family hosts (CentOS Stream 9, RockyLinux 9, AlmaLinux 9) and you see 1.6GB memory use then consider limiting amount of file descriptors: > EL9 (both CentOS Stream 9 and Rocky Linux 9) have 1073741816 while > CentOS Stream 8 has 1048576 - after lowering it's acceptable > memory usage. https://github.com/rabbitmq/erlang-rpm/discussions/104 for more

1 0

[cinder] Bug deputy report for week of 08-24-2022
by Sofia Enriquez 24 Aug '22

24 Aug '22

This is a bug report from 08-17-2022 to 08-24-2022. Agenda: https://etherpad.opendev.org/p/cinder-bug-squad-meeting ----------------------------------------------------------------------------------------- Low - https://bugs.launchpad.net/cinder/+bug/1982945 "[docs] Cannot start VM from disk with burst QoS." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1900406 "RBD support extends for in-use volume." Unassigned. Cheers, Sofia -- Sofía Enriquez she/her Software Engineer Red Hat PnT <https://www.redhat.com> IRC: @enriquetaso @RedHat <https://twitter.com/redhat> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> <https://www.redhat.com>

1 0

[octavia] Help with fix barbican client in octavia when use trust-scoped token
by Ришат Азизов 24 Aug '22

24 Aug '22

Hello! I have error with terminated https loadbalancer, it described here: https://storyboard.openstack.org/#!/story/2007619 Could you please help with fix for barbican client? Thank you.

3 3