July 2022 - openstack-discuss - lists.openstack.org

[Octavia] Proposing Tom Weininger as core reviewer
by Gregory Thiemonge 06 Jul '22

06 Jul '22

Hi Folks, I would like to propose Tom Weininger as a core reviewer for the Octavia project. Since he joined the project, Tom has been a major contributor to Octavia, and he is an excellent reviewer. Please send your feedback in this thread, if there is no objection until next week, we will add him to the list of core reviewers. Thanks Gregory

4 4

[cinder] Bug deputy report for week of 07-06-2022
by Sofia Enriquez 06 Jul '22

06 Jul '22

This is a bug report from 06-29-2022 to 07-06-2022. Agenda: https://etherpad.opendev.org/p/cinder-bug-squad-meeting ----------------------------------------------------------------------------------------- Low - https://bugs.launchpad.net/cinder/+bug/1980268 "creating a bootable volume fails async when vol_size < virtual_size of image." Fix proposed to master. Cheers, Sofia -- Sofía Enriquez she/her Software Engineer Red Hat PnT <https://www.redhat.com> IRC: @enriquetaso @RedHat <https://twitter.com/redhat> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> <https://www.redhat.com>

1 0

Re: Problem while launching an instance directly from an image "Volume did not finish being created even after we waited 203 seconds or 61 attempts"
by A Monster 06 Jul '22

06 Jul '22

Hello, I talking about launching instance from persistent volume ( cinder ), I've checked cinder logs but I've found no errors, the only error I could find is in nova compute log which says Build of instance 4cf01ba2-05b3-44e9-a685-8875d8c96b4e aborted: Volume 01739e82-9e66-41f7-be74-dfbbdcd6746e did not finish being created even after we waited 203 seconds or 61 attempts. And its status is creating. I am using openstack xena deployed with kolla ansible on centos 8 stream.

1 0

QoS Cinder, Zed Release
by Sergey Drozdov 06 Jul '22

06 Jul '22

To whom it may concern, I am helping a colleague of mine with the following pieces of work: 820027 (https://review.opendev.org/c/openstack/cinder/+/820027 <https://review.opendev.org/c/openstack/cinder/+/820027>), 820030 (https://review.opendev.org/c/openstack/cinder-specs/+/820030 <https://review.opendev.org/c/openstack/cinder-specs/+/820030>). I was wondering whether it is not too late to include the aforementioned within the Zed release? Is there anyone who can advise on this matter? Best Regards, Sergey

3 2

October 2022 PTG Dates & Registration
by Kendall Nelson 05 Jul '22

05 Jul '22

Hello Everyone! As you may have seen, we announced the next PTG[1] which will take place October 17-20, 2022 in Columbus, Ohio! Registration is now open[2]. We have also secured a limited, discounted hotel block for PTG attendees [3]. If your organization is interested in sponsoring the event, information on packages and pricing are now available on the PTG website [1] or feel free to reach out directly to ptg(a)openinfra.dev. Can't wait to SEE you all there! -Kendall Nelson (diablo_rojo) [1] https://openinfra.dev/ptg/ [2] https://openinfra-ptg.eventbrite.com/ [3] https://www.hyatt.com/en-US/group-booking/CMHRC/G-L0RT

1 0

Listing instances that use a security group
by Derek O keeffe 05 Jul '22

05 Jul '22

Hi all, Is there a cli command to list all the VM's that have a specific security group attached, I need to delete some groups as a tidy up but I only get a warning that it's in use by an instance (of which there's 200) so I'd rather not go through them 1 by 1 in Horizon or show each one on the cli separately. An sql query would be acceptable also but nova db, select * from security_groups; select * from instances; & select * from security_group_instance_association; doesn't give me the required results that I can refine to search deeper. Thanks in advance for any info. Regards,Derek

2 2

Re: Issues With trove guest agent
by Hirotaka Wakabayashi 05 Jul '22

05 Jul '22

Hello, Hernando! I think Trove calls nova to inject files here: https://opendev.org/openstack/trove/src/branch/master/trove/taskmanager/mod… When cloud-init fails to inject Trove's configuration files, I think you should check the following parameters. 1. `use_nova_server_config_drive` configuration on trove.conf. This value should be True if you use config_drive to inject files. 2. `DIB_CLOUD_INIT_DATASOURCES` environment when buiding your own image. This value should contains `OpenStack` if you set `use_nova_server_config_drive` as False. and I think you should also check cloud-init log using journalctl. Thanks, Hirotaka On Tuesday, June 28, 2022, 09:55:24 PM GMT+9, <openstack-discuss-request(a)lists.openstack.org> wrote: Send openstack-discuss mailing list submissions to openstack-discuss(a)lists.openstack.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss or, via email, send a message with subject or body 'help' to openstack-discuss-request(a)lists.openstack.org You can reach the person managing the list at openstack-discuss-owner(a)lists.openstack.org When replying, please edit your Subject line so it is more specific than "Re: Contents of openstack-discuss digest..." Today's Topics: 1. Re: Regarding Floating IP is existing Setup (Adivya Singh) 2. Issues With trove guest agent (Hernando Ariza Perez) 3. Openstack keystone LDAP integration | openstack user list --domain domain.com | Internal server error (HTTP 500) (Swogat Pradhan) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 Jun 2022 18:12:51 +0530 From: Adivya Singh <adivya1.singh(a)gmail.com> To: Slawek Kaplonski <skaplons(a)redhat.com>, OpenStack Discuss <openstack-discuss(a)lists.openstack.org> Subject: Re: Regarding Floating IP is existing Setup Message-ID: <CA+ykd61rKBam86Avut-7g+8EOS4snnzgTmMu5GvAETR3p5EuPg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" hi Slawek, it happens with a given router namespace at a time Regards Adivya Singh On Fri, Jun 24, 2022 at 10:13 PM Adivya Singh <adivya1.singh(a)gmail.com> wrote: > Hi, > > Thanks for the advice and the link, > > What i saw when i do testing using tcpdump was "ARP" was not working, and > it is not able to associate the FLoating IP with the MAC address of the > interface in the VM, When i do the associate and disassociate the VM , it > works fine > > But the Router NameSpace got changed. > > Regards > Adivya Singh > > On Thu, Jun 23, 2022 at 1:22 PM Slawek Kaplonski <skaplons(a)redhat.com> > wrote: > >> Hi, >> >> Dnia wtorek, 21 czerwca 2022 13:55:51 CEST Adivya Singh pisze: >> > hi Eugen, >> > >> > The current setup is 3 controller nodes, The Load is not much on each >> > controller and the number of DHCP agent is always set to 2 as per the >> > standard in the neutron.conf, The L3 agent seems to be stables as other >> > router namespace works fine under it, Only few router Namespace get >> > affected under the agent. >> >> Is it that problem happens for new floating IPs or for the FIPs which >> were working fine and then suddenly stopped working? If the latter, was >> there any action which triggered the issue to happen? >> Is there e.g. only one FIP broken in the router or maybe when it happens, >> then all FIPs which uses same router are broken? >> >> Can You also try to analyze with e.g. tcpdump where traffic is dropped >> exactly? You can check >> http://kaplonski.pl/blog/neutron-where-is-my-packet-2/ for some more >> detailed description how traffic should go from the external network to >> Your instance. >> >> > >> > Most of the template having issue , Have all instance having FLoating >> IP, a >> > Stack with a single floating IP have chance of issue very less >> > >> > Regards >> > Adivya Singh >> > >> > On Tue, Jun 21, 2022 at 1:18 PM Eugen Block <eblock(a)nde.ag> wrote: >> > >> > > Hi, >> > > >> > > this sounds very familiar to me, I had to deal with something similar >> > > a couple of times in a heavily used cluster with 2 control nodes. What >> > > does your setup look like, is it a HA setup? I would start checking >> > > the DHCP and L3 agents. After increasing dhcp_agents_per_network to 2 >> > > in neutron.conf and restarting the services this didn't occur again >> > > (yet). This would impact floating IPs as well, sometimes I had to >> > > disable and enable the affected router(s). If you only have one >> > > control node a different approach is necessary. Do you see a high load >> > > on the control node? >> > > >> > > >> > > Zitat von Adivya Singh <adivya1.singh(a)gmail.com>: >> > > >> > > > hi Team, >> > > > >> > > > We got a issue in Xena release, where we set the environment in >> Ubuntu >> > > > Platform, But later we get some issues in Floating IP not reachable. >> > > > >> > > > In a Network node, not all router namespace are Impacted and only >> few of >> > > > them get affected, So we can not comment Network node has a issue. >> > > > >> > > > The L3 agent where the Router is tied up, Worked just fine, as other >> > > > routers work Fine. >> > > > >> > > > and the one having issue in Floating IP, if i unassigned and >> assigned it >> > > > starts working most of the time. >> > > > >> > > > Any thoughts on this >> > > > >> > > > Regards >> > > > Adivya Singh >> > > >> > > >> > > >> > > >> > > >> > >> >> >> -- >> Slawek Kaplonski >> Principal Software Engineer >> Red Hat > >

1 0

import external compute
by Parsa Aminian 05 Jul '22

05 Jul '22

hello is there any way that i can import an already existing kolla-ansible compute to my openstack ? migrating instances manually take a lot of time from me

2 1

Ironic pxe tftp service failed | Tripleo wallaby
by Swogat Pradhan 05 Jul '22

05 Jul '22

Hi, I am trying to setup openstack wallaby using the repo : centos-release-openstack-wallaby on top of centos 8 stream. I have deployed undercloud but the service ironic_pxe_tftp is not starting up. Previously the undercloud was failing but now the undercloud is deployed successfully but the service is not coming up. Error log from ironic_pxe_tftp: [root@undercloud ~]# podman logs 23427d845098 /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory /bin/bash: /usr/sbin/in.tftpd: No such file or directory My undercloud config: [DEFAULT] undercloud_hostname = undercloud.taashee.com container_images_file = containers-prepare-parameter.yaml local_ip = 192.168.30.50/24 undercloud_public_host = 192.168.30.39 undercloud_admin_host = 192.168.30.41 undercloud_nameservers = 8.8.8.8 pxe_enabled = true #undercloud_ntp_servers = overcloud_domain_name = taashee.com subnets = ctlplane-subnet local_subnet = ctlplane-subnet #undercloud_service_certificate = generate_service_certificate = true certificate_generation_ca = local local_interface = eno3 inspection_extras = false undercloud_debug = false enable_tempest = false enable_ui = false [auth] [ctlplane-subnet] cidr = 192.168.30.0/24 dhcp_start = 192.168.30.60 dhcp_end = 192.168.30.100 inspection_iprange = 192.168.30.110,192.168.30.150 gateway = 192.168.30.1 With regards, Swogat Pradhan

4 9

[all][tc][policy][operator] RBAC discussion policy pop-up next meeting: Tuesday 5 July (biweekly meeting)
by Ghanshyam Mann 04 Jul '22

04 Jul '22

Hello Everyone, RBAC policy popup next meeting is schedule tomorrow on 5th July at 14:00 UTC Meeting details: https://wiki.openstack.org/wiki/Consistent_and_Secure_Default_Policies_Popu… Feel free to add the topic you would to discuss in this etherpad: https://etherpad.opendev.org/p/rbac-zed-ptg#L213 -gmann

1 0