April 2022 - openstack-discuss - lists.openstack.org

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 23 Apr '25

23 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 22 Apr '25

22 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat.| Openstack tripleo wallaby version
by Swogat Pradhan 23 Dec '24

23 Dec '24

Hi, I am currently trying to deploy openstack wallaby using tripleo arch. I created the network jinja templates, ran the following commands also: #openstack overcloud network provision --stack overcloud --output networks-deployed-environment.yaml custom_network_data.yaml # openstack overcloud network vip provision --stack overcloud --output vip-deployed-environment.yaml custom_vip_data.yaml # openstack overcloud node provision --stack overcloud --overcloud-ssh-key /home/stack/sshkey/id_rsa overcloud-baremetal-deploy.yaml and used the environment files in the openstack overcloud deploy command: (undercloud) [stack@hkg2director ~]$ cat deploy.sh #!/bin/bash THT=/usr/share/openstack-tripleo-heat-templates/ CNF=/home/stack/ openstack overcloud deploy --templates $THT \ -r $CNF/templates/roles_data.yaml \ -n $CNF/workplace/custom_network_data.yaml \ -e ~/containers-prepare-parameter.yaml \ -e $CNF/templates/node-info.yaml \ -e $CNF/templates/scheduler-hints.yaml \ -e $CNF/workplace/networks-deployed-environment.yaml \ -e $CNF/workplace/vip-deployed-environment.yaml \ -e $CNF/workplace/overcloud-baremetal-deployed.yaml \ -e $CNF/workplace/custom-net-bond-with-vlans.yaml Now when i run the ./deploy.sh script i encounter an error stating: ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command.: tripleoclient.exceptions.InvalidConfiguration: Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command. 2022-04-19 13:47:16.582 735924 INFO osc_lib.shell [-] END return value: 1 Can someone tell me where the mistake is? With regards, Swogat Pradhan

4 4

Live migration fails
by Szabo, Istvan (Agoda) 06 Aug '24

06 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[puppet] Proposing core team clean up
by Takashi Kajinami 23 Aug '23

23 Aug '23

Hello, I went through the current core reviewers and found out that the current list includes some people no longer working in the OpenStack community. I'd like to propose removing the following persons from the core reviewer team as we haven't seen these people making any activity in the community recently. * Pradeep Kilambi - puppet-aodh, puppet-ceilometer, puppet-gnocchi, puppet-panko * Richard Megginson - puppet-keystone * Denis Egorenko - puppet-murano * Serg Melikyan - puppet-murano * Sergey Kolekonov - puppet-neutron * David Moreau Simard - puppet-openstack-integration * Yu xingchao - all modules Also, I confirmed that Wes Hayutin is no longer working for OpenStack and he agreed to retire from the core reviewer position. Thus I'll remove him as well. I'll be open for any feedback for one week to hear any thoughts/feedback about this removal. I'd like to take this moment to thank all people for their past work. We always welcome them back if they resume their work in this project. Thank you, Takashi KAJINAMI

3 4

[all] Dynamic Zuul results table in Gerrit 3
by Radosław Piliszek 04 Aug '22

04 Aug '22

Hello Fellow OpenStack and OpenDev Folks! TL;DR click on [3] and enjoy. I am starting this thread to not hijack the discussion happening on [1]. First of all, I would like to thank gibi (Balazs Gibizer) for hacking a way to get the place to render the table in the first place (pun intended). I have been a long-time-now user of [2]. I have improved and customised it for myself but never really got to share back the changes I made. The new Gerrit obviously broke the whole script so it was of no use to share at that particular state. However, inspired by gibi's work, I decided to finally sit down and fix it to work with Gerrit 3 and here it comes: [3]. Works well on Chrome with Tampermonkey. Not tested others. I hope you will enjoy this little helper (I do). I know the script looks super fugly but it generally boils down to a mix of styles of 3 people and Gerrit having funky UI rendering. Finally, I'd also like to thank hrw (Marcin Juszkiewicz) for linking me to the original Michel's script in 2019. [1] http://lists.openstack.org/pipermail/openstack-discuss/2020-November/019051… [2] https://opendev.org/x/coats/src/commit/444c95738677593dcfed0cfd9667d4c4f0d5… [3] https://gist.github.com/yoctozepto/7ea1271c299d143388b7c1b1802ee75e Kind regards, -yoctozepto

5 7

[adjutant][tc][all] Call for volunteers to be a PTL and maintainers
by Slawek Kaplonski 14 Jul '22

14 Jul '22

Hi, After last PTL elections [1] Adjutant project don't have any PTL. It also didn't had PTL in the Yoga cycle already. So this is call for maintainters for Adjutant. If You are using it or interested in it, and if You are willing to help maintaining this project, please contact TC members through this mailing list or directly on the #openstack-tc channel @OFTC. We can talk possibilities to make someone a PTL of the project or going with this project to the Distributed Project Leadership [2] model. [1] http://lists.openstack.org/pipermail/openstack-discuss/2022-February/027411… [2] https://governance.openstack.org/tc/resolutions/20200803-distributed-projec… -- Slawek Kaplonski Principal Software Engineer Red Hat

4 8

[all] PyCharm Licenses Renewed till July 2021
by Swapnil Kulkarni 13 Jul '22

13 Jul '22

Hello, Happy to inform you the open source developer license for Pycharm has been renewed for 1 additional year till July 2021. Best Regards, Swapnil Kulkarni coolsvap at gmail dot com

8 13

Nova not updating to new size of an extended in-use / attached cinder volume (Ceph RBD) to guest
by Christian Rohmann 28 Jun '22

28 Jun '22

Hello Openstack-Discuss, after some digging I found out that cinder learned to resize attached (in-use) volumes quite a while ago with the introduction of the initial "extend 'in-use' volume" feature: https://review.opendev.org/c/openstack/cinder/+/454287/ The support was then extended to also cover Ceph RBD backed volumes with: https://review.opendev.org/c/openstack/nova/+/613039/ Since this is only about the cinder part, I was wondering if nova would ever find out and would actively rescan the device / volume and quintessentially present an increased new size to the guest. Apparently this is where a certain volume-extended event comes into play: https://review.opendev.org/c/openstack/nova/+/454322/ that is to be emitted by cinder when a volume had been extened. I then went head and tried this with the openstack cli (as Horizon does not seem to support / offer to resize in-use volumes. I run Openstack Train with Ceph RBD as storage. First I ran into an issue with the openstack cli (https://bugs.launchpad.net/cinder/+bug/1871759/comments/2 <https://bugs.launchpad.net/cinder/+bug/1871759/comments/2>) but using cinder extend $volumeid $newsize I was able to resize in-use volumes just fine. The only thing missing was the propagation to the guest. I played around with SCSI rescans, but that did not work, reboots also failed to do anyting in this regards. Stopping and starting the VM did work, but why having the capability to online-resize an attached volume when not being able to resize the guest volume as well? Apparently there seems to be an old and somewhat similar observation / bug with https://bugs.launchpad.net/nova/+bug/1369465 So I was simply wondering if this is expected to be working? Are there any special settings / options I need to set to enable this feature? Thanks and with kind regards Christian

4 9

[Ceph Rados Gateway] 403 when using S3 client
by Taltavull Jean-François 26 Jun '22

26 Jun '22

Hi All, I get an http 403 error code when I try to get the bucket list with Ubuntu (Focal) S3 client (awscli). S3 api has been activated in radosgw config file and EC2 credentials have been created and put in S3 client config file. Otherwise, everything is working fine with OpenStack client. My deployment: - OSA 23.2.0 - OpenStack Wallaby - Ceph and Rados GW Octopus Has any of you already experienced this kind of behaviour ? Many thanks, Jean-Francois

3 6

[oslo] Propose to EOL stable/queens, stable/rocky on all the oslo scope
by Herve Beraud 24 Jun '22

24 Jun '22

Hi, On our last meeting of the oslo team we discussed the problem with broken stable branches (rocky and older) in oslo's projects [1]. Indeed, almost all these branches are broken. Előd Illés kindly generated a list of periodic-stable errors on Oslo's stable branches [2]. Given the lack of active maintainers on Oslo and given the current status of the CI in those branches, I propose to make them End Of Life. I will wait until the end of month for anyone who would like to maybe step up as maintainer of those branches and who would at least try to fix CI of them. If no one will volunteer for that, I'll EOLing those branches for all the projects under the oslo umbrella. Let us know your thoughts. Thank you for your attention. [1] https://meetings.opendev.org/meetings/oslo/2021/oslo.2021-10-04-15.00.log.t… [2] http://lists.openstack.org/pipermail/openstack-discuss/2021-July/023939.html -- Hervé Beraud Senior Software Engineer at Red Hat irc: hberaud https://github.com/4383/ https://twitter.com/4383hberaud

5 5

R: R: R: [Devstack][Gnocchi][Ceilometer] Not able to retrieve metrics using ceilometer and gnocchi
by Molka Gharbaoui 22 Jun '22

22 Jun '22

3 4

[all][tc] Change OpenStack release naming policy proposal
by Slawek Kaplonski 03 Jun '22

03 Jun '22

Hi, During the last PTG in April 2022 in the TC meeting we were discussing our release naming policy [1]. It seems that choosing appropriate name for every releases is very hard and time consuming. There is many factors which needs to be taken into consideration there like legal but also meaning of the chosen name in many different languages. Finally we decided that now, after Zed release, when we will go all round through alphabet it is very good time to change this policy and use only numeric version with "year"."release in the year". It is proposed in [2]. This is also good timing for such change because in the same release we are going to start our "Tick Tock" release cadence which means that every Tick release will be release with .1 (like 2023.1, 2024.1, etc.) and every Tock release will be one with .2 (2023.2, 2024.2, etc.). [1] https://etherpad.opendev.org/p/tc-zed-ptg#L265[1] [2] https://review.opendev.org/c/openstack/governance/+/839897[2] -- Slawek Kaplonski Principal Software Engineer Red Hat -------- [1] https://etherpad.opendev.org/p/tc-zed-ptg#L265 [2] https://review.opendev.org/c/openstack/governance/+/839897

16 42

[Neutron][neutron-vpnaas] proposing Mohammed Naser for neutron-vpnaas core reviewer
by Lajos Katona 12 May '22

12 May '22

Hi, I would like to propose Mohammed Naser (mnaser) as a core reviewer to neutron-vpnaas. He and his company uses neutron-vpnaas in production and volunteered to help in the maintenance of it. You can vote/feedback in this email thread. If there is no objection by 6th of May, we will add Mohammed to the core list. Thanks Lajos

6 6

[all][tc][policy][heat][cinder] Continuing the RBAC PTG discussion + policy pop-up meeting new time
by Ghanshyam Mann 10 May '22

10 May '22

Hello Everyone, As we said in PTG about continuing the RBAC discussion on open questions (currently from Heat and Cinder), we are scheduling the call on April 26 Tuesday from 14:30-15:00 UTC. And we will use the same time for the policy-popup team meeting every alternate Tuesday to answer RBAC queries from any projects. Meeting Details: - https://wiki.openstack.org/wiki/Consistent_and_Secure_Default_Policies_Popu… Agenda (you can add for this or coming meetings) - https://etherpad.opendev.org/p/rbac-zed-ptg#L97 -gmann

1 2

[TripleO] Tear down of Train centOS 7 check jobs and integration line
by Ronelle Landy 09 May '22

09 May '22

Hello All, We have been running check/gate testing and integration lines for the Train release on both CentOS7 and CentOS 8. Following the work on CentOS 9 and the longevity of the Train release, we proposed removing the CentOS 7 Train jobs and building/testing changes to this release on CentOS 8 only. We floated this proposal with some interested parties and received no objections so we are beginning work on this tear down. We anticipate that removing the CentOS 7 jobs will allow patches to merge quicker and will free up resources for future work. Please respond if you have any questions or concerns. Thanks, Ronelle (for the TripleO CI team)

2 2

[manila] Zed cycle bug squash
by Carlos Silva 06 May '22

06 May '22

Greetings Zorillas and interested stackers! As mentioned in the previous weekly meetings, we will soon be meeting for the first bugsquash of the Zed release! The event will be held from May 2nd to May 6th, providing an extended contribution window. May 2nd 15:00 - 16:00 UTC - Kick off May 5th 15:00 - 16:00 UTC - Mid term checkpoint (we won't have our regular Manila meeting on this day) May 6th 15:00 - 15:30 UTC - Wrap Up We will use a meetpad for these meetings [1]. The main idea of this event is to go over the list of stale bugs and act on them, either seeing if they are incomplete or invalid at this point or working on them. The stale bugs list will be available on [2]. [1] https://meetpad.opendev.org/ManilaZed1Bugsquash [2] https://ethercalc.openstack.org/1nesczgjufb9 See you next week! Thank you, carloss

1 1

[all][tc][Release Management] Improvements in project governance
by Slawek Kaplonski 05 May '22

05 May '22

Hi, During the Zed PTG sessions in the TC room we were discussing some ideas how we can improve project governance. One of the topics was related to the projects which don't really have any changes in the cycle. Currently we are forcing to do new release of basically the same code when it comes to the end of the cycle. Can/Should we maybe change that and e.g. instead of forcing new release use last released version of the of the repo for new release too? If yes, should we then automatically propose change of the release model to the "independent" maybe? What would be the best way how Release Management team can maybe notify TC about such less active projects which don't needs any new release in the cycle? That could be one of the potential conditions to check project's health by the TC team. Another question is related to the projects which aren't really active and are broken during the final release time. We had such problem in the last cycle, see [1] for details. Should we still force pushing fixes for them to be able to release or maybe should we consider deprecation of such projects and not to release it at all? [1] http://lists.openstack.org/pipermail/openstack-discuss/2022-March/027864.ht… -- Slawek Kaplonski Principal Software Engineer Red Hat -------- [1] http://lists.openstack.org/pipermail/openstack-discuss/2022-March/027864.ht…

4 4

[api=sig][i18n][infra][tc] Cleaning up more defunct mailing lists
by Jeremy Stanley 04 May '22

04 May '22

A quick audit of the mailing lists we host at lists.openstack.org turned up the following 11 which have had no new posts for at least three years now: * openstack-api-consumers * openstack-de * openstack-el * openstack-i18n-fr * openstack-ir * openstack-personas * openstack-ru * openstack-sos * openstack-tw * openstack-vi * third-party-announce I'd like to clean them up by removing their list configurations, but leaving any public archives intact. Are there any objections? Should any of the above have future messages redirected to a different list (though since they haven't had any for years, that's probably unnecessary)? -- Jeremy Stanley

5 8

question -dashboard horizon
by mahdi n 03 May '22

03 May '22

I login-ed in horizon but in page project http://ip:8000/project show error that : You are not authorized to access this page please login screenshot how to solve this?

4 4

[all][tc] What's happening in Technical Committee: summary April 29th, 22: Reading: 5 min
by Ghanshyam Mann 29 Apr '22

29 Apr '22

Hello Everyone, Here is this week's summary of the Technical Committee activities. 1. TC Meetings: ============ * We had this week's meeting on April 28. Most of the meeting discussions are summarized in this email. Meeting full logs are available @https://meetings.opendev.org/meetings/tc/2022/tc.2022-04-21-15.00.html * Next TC weekly meeting will be on May 5 Thursday at 15:00 UTC, feel free to add the topic on the agenda[1] by May 4. We will cover CFN and tick-tock release notes topic there and if time permits then cover any othe topic. 2. What we completed this week: ========================= * Resolution to drop the lower constraints maintenance[2] * Remove TC Liaisons framework[3] * Retired openstack-helm-docs[4] 3. Activities In progress: ================== TC Tracker for Zed cycle ------------------------------ * Zed tracker etherpad includes the TC working items[5], we have started the many items. Open Reviews ----------------- * Seven open reviews for ongoing activities[6]. Change OpenStack release naming policy proposal ----------------------------------------------------------- We discussed it it PTG, TC decided to drop the name from release name process and keping the numbers. Slaweq proposed it on gerrit[7] and on ML[8]. Discussion is in progress as there are some objection from foundation marketting team. Migration from old ELK service to new Dashboard ----------------------------------------------------------- You might have seen that Daniel email about the new dashboard[9] and login information, we encourage community members to use it and provide feedback if any. Dainel also investigation about the e-r instance. Consistent and Secure Default RBAC ------------------------------------------- We discussed about the heat mostly in Tuesday call but could not get any consensus. Notes are in etherpad[10] and will continue the discussion on Tuesday 3rd May 14:00 UTC [11], FIPs community-wide goal ------------------------------- Ade has proposed the new milestone for this goal work, please review those and give feedback if any[12]. 2021 User Survey TC Question Analysis ----------------------------------------------- No update on this. The survey summary is up for review[13]. Feel free to check and provide feedback. Zed cycle Leaderless projects ---------------------------------- No updates on this. Only Adjutant project is leaderless/maintainer-less. We will check Adjutant's situation again on ML and hope Braden will be ready with their company side permission[14]. Fixing Zuul config error ---------------------------- Requesting projects with zuul config error to look into those and fix them which should not take much time[15]. Project updates ------------------- * Add the cinder-three-par charm to Openstack charms[16] 4. How to contact the TC: ==================== If you would like to discuss or give feedback to TC, you can reach out to us in multiple ways: 1. Email: you can send the email with tag [tc] on openstack-discuss ML[17]. 2. Weekly meeting: The Technical Committee conduct a weekly meeting every Thursday 15 UTC [18] 3. Ping us using 'tc-members' nickname on #openstack-tc IRC channel. [1] https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting [2] https://review.opendev.org/c/openstack/governance/+/838004 [3] https://review.opendev.org/c/openstack/governance/+/837891 [4] https://review.opendev.org/c/openstack/governance/+/839100 [5] https://etherpad.opendev.org/p/tc-zed-tracker [6] https://review.opendev.org/q/projects:openstack/governance+status:open [7] https://review.opendev.org/c/openstack/governance/+/839897 [8] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028354.ht… [9] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028346.ht… [10] https://etherpad.opendev.org/p/rbac-zed-ptg#L103 [11] https://wiki.openstack.org/wiki/Consistent_and_Secure_Default_Policies_Popu… [12] https://review.opendev.org/c/openstack/governance/+/838601 [13] https://review.opendev.org/c/openstack/governance/+/836888 [14] http://lists.openstack.org/pipermail/openstack-discuss/2022-March/027626.ht… [15] https://etherpad.opendev.org/p/zuul-config-error-openstack [16] https://review.opendev.org/c/openstack/governance/+/837781 [17] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss [18] http://eavesdrop.openstack.org/#Technical_Committee_Meeting -gmann

1 0

[dev][infra][tact-sig] Retiring the status.openstack.org server
by Jeremy Stanley 29 Apr '22

29 Apr '22

With the recent retirement of the Elastic-Recheck and OpenStack-Health services, as well as Zuul long ago growing its own status dashboard, the only other thing still being served from the status.openstack.org site is a very broken and empty ReviewDay interface. I'm planning to take status.openstack.org offline at the end of this month (late next week), so wanted to give everyone a heads up that anything still served from that site right now (basically just a link to the Zuul status page for our openstack tenant) will be going away. If you want the Zuul status page for openstack, the proper URL is https://zuul.opendev.org/t/openstack/status or you can just go to the root of the site and click the "status" link in the openstack tenant row. (There's also a white-label zuul.openstack.org site but that's primarily maintained in order to avoid breaking old tools people may have hard-coded to use it.) -- Jeremy Stanley

1 1

Need information
by Gk Gk 29 Apr '22

29 Apr '22

Hi All, I need information about availability zones in nova. I tried googling but cant find enough information. My questions are , 1. Why is it that we have two concepts of aggregates and AZs ? Is one not enough ? Like exposing aggregates and creating flavors with extra specs to match ? Why do we need AZs also ? 2. Why is it that one node should only be a part of one AZ but not two ? whereas in the case of aggregates, it can overlap ? 3. Also why cant we expose only aggregates like AZs but block the compute member list to the users ? Doing this way will serve the purpose of AZ as well ? Why we dont want to expose aggregates as AZs ? Thanks Kumar

2 1

regarding custom role creation
by Adivya Singh 29 Apr '22

29 Apr '22

Hi Team, i want to create a custom role in openstack, with privilege being 1> to allow them to make image public 2> to modify/change the flavor how can i do this, I have openstack installed with XENA regards Adivya Singh

2 1

ERROR trust id
by Firas Dehech 29 Apr '22

29 Apr '22

Hi all, I am working on a project Openstack in linux ubuntu 20.04. I want to create a cluster hadoop with one master-node and three worker-nodes and i have a problem with a cluster that doesn't work. Status ERROR: Creating cluster failed for the following reason(s): Failed to create trust Error ID: ef5e8b0a-8e6d-4878-bebb-f37f4fa50a88, Failed to create trust Error ID: 43157255-86af-4773-96c1-a07ca7ac66ed. links: https://docs.openstack.org/devstack/latest/ File local.conf : [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=secret RABBIT_PASSWORD=secret SERVICE_PASSWORD=$ADMIN_PASSWORD HOST_IP=10.0.2.15 LOGFILE=$DEST/logs/stack.sh.log SWIFT_REPLICAS=1SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 SWIFT_DATA_DIR=$DEST/data enable_plugin sahara https://opendev.org/openstack/sahara enable_plugin sahara-dashboard https://opendev.org/openstack/sahara-dashboard Can you guys advise me about these errors. Is there anything to worry about? Regards.

1 0

[neutron] Drivers meeting - Friday 29.4.2022 - cancelled
by Lajos Katona 28 Apr '22

28 Apr '22

Hi Neutron Drivers! Due to the lack of agenda, let's cancel tomorrow's drivers meeting. See You on the meeting next week. Lajos Katona (lajoskatona)

1 0

撤回: [all] New CFN(Computing Force Network) SIG Proposal
by niujie 28 Apr '22

28 Apr '22

niujie 将撤回邮件“[all] New CFN(Computing Force Network) SIG Proposal ”。

5 12

[Openstack Triple0 Wallaby] Deployment error
by Lokendra Rathour 28 Apr '22

28 Apr '22

Hi Team, we tried OpenStack deployment using *Triple0 Wallaby.* while we were trying to deploy the setup Undercloud was deployed successfully. For the Overcloud Deployment: we generated the templates: Command: ./usr/share/openstack-tripleo-heat-templates/tools/process-templates.py -o ~/openstack-tripleo-heat-templates-rendered_at_wallaby -n /home/stack/templates/network_data.yaml -r /home/stack/templates/roles_data.yaml and using the below command to deploy overcloud: openstack overcloud deploy --templates \ -n /home/stack/templates/network_data.yaml \ -r /home/stack/templates/roles_data.yaml \ -e /home/stack/templates/environment.yaml \ -e /home/stack/templates/environments/network-isolation.yaml \ -e /home/stack/templates/environments/network-environment.yaml \ -e /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-conductor.yaml \ -e /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-inspector.yaml \ -e /usr/share/openstack-tripleo-heat-templates/environments/services/ironic-overcloud.yaml \ -e /home/stack/templates/ironic-config.yaml \ -e /usr/share/openstack-tripleo-heat-templates/environments/docker-ha.yaml \ -e /usr/share/openstack-tripleo-heat-templates/environments/podman.yaml \ -e /home/stack/containers-prepare-parameter.yaml after which it fails with error: 2022-04-27 12:34:00.801 607453 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud [-] Exception occured while running the command: ValueError: Failed to deploy: ERROR: HEAT-E99001 Service neutron is not available for* resource type OS::TripleO::Network::Ports::ControlPlaneVipPort, reason: neutron network endpoint is not in service catalog.* Traceback (most recent call last): we were able to deploy Triple0 Victoria/ Train /ussuri using the same approach. Please suggest any further changes needed to include in our setup. -Lokendra

1 1

ELK services moving to OpenSearch
by Daniel Pawlik 28 Apr '22

28 Apr '22

Hello, We would like to announce the new Elasticsearch service based on Opensearch. As it was earlier mentioned [1], the old service logstash.openstack.org is deprecated and will be decommissioned in the near future. Same as earlier, each Zuul CI job results will be sent to the Elasticsearch service. With the new CI log processing system [2], we decided to add more logs to be proceeded [3]. If some important files are missing, please let me know. To use this new service, please check out the documentation [4][5] or use the following credentials: url: https://opensearch.logs.openstack.org/_dashboards/app/discover?security_ten… username: openstack password: openstack tenant: global I would also like to take this opportunity to ask for help with the OpenStack ci-log-processing project [6] which is providing configuration of the Opensearch service as well as tools required to process CI logs and push them into the Opensearch service. Cheers, Dan [1] https://lists.openstack.org/pipermail/openstack-discuss/2021-May/022359.html [2] https://lists.openstack.org/pipermail/openstack-discuss/2022-February/02736… [3] https://opendev.org/openstack/ci-log-processing/src/branch/master/logscrape… [4] https://docs.openstack.org/project-team-guide/testing.html#checking-status-… [5] https://governance.openstack.org/sigs/tact-sig.html#opensearch [6] https://opendev.org/openstack/ci-log-processing

1 0

Nova support for multiple vGPUs?
by Sigurd Kristian Brinch 28 Apr '22

28 Apr '22

Hi, As far as I can tell, libvirt/KVM supports multiple vGPUs per VM (https://docs.nvidia.com/grid/14.0/grid-vgpu-release-notes-generic-linux-kvm…) but in OpenStack/Nova it is limited to one vGPU per VM (https://docs.openstack.org/nova/latest/admin/virtual-gpu.html#configure-a-f…) Is there a reason for this limit? What would be needed to enable multiple vGPUs in Nova? BR Sigurd

3 4

[Browbeat]performance/load testing
by Vishwanath 27 Apr '22

27 Apr '22

Hello, I installed openstack using kolla-ansible, i would like to do load/performance testing, i came across below openstack page. https://docs.openstack.org/self-healing-sig/latest/testing/tools-list.html Browbeat looks like a perfect fit for what i want to do.I read browbeat documentation . Questions i have is: - as per the browbeat documentation, in order to install this we need to have openstack installation via tripleo (undercloud/overcloud) , does browbeat work with non triiplo openstack deployment? - I don’t have undercloud/overcloud setup. Regards Vish

1 0

Openstack Trove - Polling request timed out
by Manish Bharti 27 Apr '22

27 Apr '22

Dear Team, We are trying to deploy OpenStack environment for our application and while deploying trove service we are facing the below error(attached screenshot)- Traceback (most recent call last): File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 207, in wait_for_task return polling_task.wait() File "/usr/lib/python3/dist-packages/eventlet/event.py", line 125, in wait result = hub.switch() File "/usr/lib/python3/dist-packages/eventlet/hubs/hub.py", line 313, in switch return self.greenlet.switch() File "/usr/lib/python3/dist-packages/oslo_service/loopingcall.py", line 154, in _run_loop idle = idle_for_func(result, self._elapsed(watch)) File "/usr/lib/python3/dist-packages/oslo_service/loopingcall.py", line 349, in _idle_for raise LoopingCallTimeOut( oslo_service.loopingcall.LoopingCallTimeOut: Looping call timed out after 870.99 seconds During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/trove/taskmanager/models.py", line 434, in wait_for_instance utils.poll_until(self._service_is_active, File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 223, in poll_until return wait_for_task(task) File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 209, in wait_for_task raise exception.PollTimeOut trove.common.exception.PollTimeOut: Polling request timed out. Please help us on this issue. -- Thank you , Manish Bharti Jodhpur, Raj - 342001. Contact:8875033000

2 1

[all][tc] Technical Committee next weekly meeting on April 28, 2022 at 1500 UTC
by Ghanshyam Mann 27 Apr '22

27 Apr '22

Hello Everyone, Technical Committee's next weekly meeting is scheduled for April 28, 2022 at 1500 UTC. If you would like to add topics for discussion, please add them to the below wiki page by Wednesday, April 27, at 2100 UTC. https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting -gmann

1 1

[openstack-helm] gnocchi chart removal
by Gage Hugo 27 Apr '22

27 Apr '22

Hey team, One of the topics from the last few PTGs have been reducing the scope of openstack-helm by evaluating which charts were being used and which ones have not been actively maintained and one of those charts that has been discussed was gnocchi. Besides a change to tolerations that was applied to most of the charts in the repo, the gnocchi chart has not seen much activity and there wasn't any immediate interest in maintaining it, so the current plan is to remove it from the repo. If you are someone who is actively using the gnocchi chart and would be interested in helping to maintain it, please let me know!

1 0

[all][qa] Dropping centos-8-stream support and testing
by Ghanshyam Mann 27 Apr '22

27 Apr '22

Hello Everyone, As you know, in zed cycle we are targeting centos-9-stream in testing runtime[1] and dropping the py3.6 support. By dropping the py3.6 support means stop testing the py3.6 and require "python_requires = >=3.8" , For example nova - https://github.com/openstack/nova/blob/5f5551448dcfcde26095963e223f973b90e6… With that centos-8-stream jobs are failing 100% and in qa meeting we decided to drop the support in devstack[2]. Dropping support in devstack means: 1. we will stop testing it[3] 2. Drop support from stack.sh. By disabling centos-8-stream from the supported_distro by default[4] in stack.sh (you can enable it by running with force flag). 1st is done and patch to remove the centos-8-stream job is merged (along with in Tempest and nova). For 2nd one we will wait for 1 more week and will discuss to do in next QA meeting. Please start removing or replacing the c8s jobs with c9s in your projects. You can keep gerrit topic 'drop-c8s-testing' to know the overall status. [1] https://governance.openstack.org/tc/reference/runtimes/zed.html [2] https://meetings.opendev.org/meetings/qa/2022/qa.2022-04-26-15.00.log.html#… [3] https://review.opendev.org/q/topic:drop-c8s-testing [4] https://github.com/openstack/devstack/blob/48417ca241cacff8f4398910792489a5… -gmann

3 4

[cinder] Bug deputy report for week of 04-26-2022
by Sofia Enriquez 27 Apr '22

27 Apr '22

This is a bug report from 04-20-2022 to 04-26-2022. Agenda: https://etherpad.opendev.org/p/cinder-bug-squad-meeting ----------------------------------------------------------------------------------------- Medium - https://bugs.launchpad.net/os-brick/+bug/1969794 "backport of the fix for bug #1947370 make lock_path a required config option when prvisouls it was optional." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1969373 "Simultaneous volume creation with the same image in multi-attach mode returns error." Assigned to Rajat. - https://bugs.launchpad.net/cinder/+bug/1969531 "NetApp NFS Storage Migration between backends is Failing." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1969643 "RBD: Unable to delete a volume which has snapshot/volume children." Assigned to Sofia Enriquez and Eric Harney. No fix proposed to master yet. - https://bugs.launchpad.net/cinder/+bug/1969784 "[Pure Storage] Replicated array communication failure not handled correctly." Assigned to Simon Dodsley. No fix proposed to master yet. Low - https://bugs.launchpad.net/cinder/+bug/1967683 "Wrong property to look up remote address." Fix proposed to master. - https://bugs.launchpad.net/cinder/+bug/1970237 "[RBD] Multiple full backups cannot be created from one snapshot." Assigned to liuhuajie. No patch proposed to master yet. - https://bugs.launchpad.net/cinder/+bug/1969913 "[Documentation] Migration in cinder, lvm-rbd example is not correct." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1966904 "Complex config formula evaluation causes RecursionError." Fix proposed to master. Wishlist - https://bugs.launchpad.net/cinder/+bug/1970208 "Rebranding. Dell EMC must be renamed to Dell." Assigned to Alexander Malashenko. Fix proposed to master. - https://bugs.launchpad.net/cinder/+bug/1970115 " [Enhancement] No way to disable image conversion." Assigned to Rico Lin. No fix proposed to master yet. - https://bugs.launchpad.net/cinder/+bug/1970114 " [Enhancement] Image conversion with RBD is not efficient." Unassigned. No fix proposed to master yet. Cheers, -- Sofía Enriquez she/her Software Engineer Red Hat PnT <https://www.redhat.com> IRC: @enriquetaso @RedHat <https://twitter.com/redhat> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> <https://www.redhat.com>

1 0

RDO Yoga Released
by Amy Marrich 27 Apr '22

27 Apr '22

The RDO community is pleased to announce the general availability of the RDO build for OpenStack Yoga for RPM-based distributions, CentOS Stream and Red Hat Enterprise Linux. RDO is suitable for building private, public, and hybrid clouds. Yoga is the 25th release from the OpenStack project, which is the work of more than 1,000 contributors from around the world. The release is already available on the CentOS mirror network: - For CentOS Stream 8 http://mirror.centos.org/centos/8-stream/cloud/x86_64/openstack-yoga - For CentOS Stream 9 http://mirror.stream.centos.org/SIGs/9-stream/cloud/x86_64/openstack-yoga/ The RDO community project curates, packages, builds, tests and maintains a complete OpenStack component set for RHEL and CentOS Stream and is a member of the CentOS Cloud Infrastructure SIG. The Cloud Infrastructure SIG focuses on delivering a great user experience for CentOS users looking to build and maintain their own on-premise, public or hybrid clouds. All work on RDO and on the downstream release, Red Hat OpenStack Platform, is 100% open source, with all code changes going upstream first. Interesting things in the Yoga release include: - RDO Yoga is the first RDO version built and tested for CentOS Stream 9. - In order to ease transition from CentOS Stream 8, RDO Yoga is also built and tested for CentOS Stream 8. Note that next release of RDO will be available only for CentOS Stream 9. The highlights of the broader upstream OpenStack project may be read via https://releases.openstack.org/yoga/highlights.html TripleO in the RDO Yoga release: Since the Xena development cycle, TripleO follows the Independent release model <https://specs.openstack.org/openstack/tripleo-specs/specs/xena/tripleo-inde…> and will only maintain branches for selected OpenStack releases. In the case of Yoga, TripleO will not support the Yoga release. For TripleO users in RDO, this means that: - RDO Yoga will include packages for TripleO tested at OpenStack Yoga GA time. - Those packages will not be updated during the entire Yoga maintenance cycle. - RDO will not be able to included patches required to fix bugs in TripleO on RDO Yoga. - The lifecycle for the non-TripleO packages will follow the code merged and tested in upstream stable/yoga branches. - There will not be any TripleO Yoga container images built/pushed, so interested users will have to do their own container builds when deploying Yoga. You can find details about this on the RDO Webpage <https://www.rdoproject.org/documentation/tripleo-in-xena/> *Contributors* During the Yoga cycle, we saw the following new RDO contributors: - Adriano Vieira Petrich - Andrea Bolognani - Dariusz Smigiel - David Vallee Delisle - Douglas Viroel - Jakob Meng - Lucas Alvares Gomes - Luis Tomas Bolivar - T. Nichole Williams - Karolina Kula Welcome to all of you and Thank You So Much for participating! But we wouldn’t want to overlook anyone. A super massive Thank You to all 40 contributors who participated in producing this release. This list includes commits to rdo-packages, rdo-infra, and redhat-website repositories: - Adriano Vieira Petrich - Alan Bishop - Alan Pevec - Alex Schultz - Alfredo Moralejo - Amy Marrich (spotz) - Andrea Bolognani - Chandan Kumar - Daniel Alvarez Sanchez - Dariusz Smigiel - David Vallee Delisle - Douglas Viroel - Emma Foley - Gaël Chamoulaud - Gregory Thiemonge - Harald - Jakob Meng - James Slagle - Jiri Podivin - Joel Capitao - Jon Schlueter - Julia Kreger - Kashyap Chamarthy - Lee Yarwood - Lon Hohberger - Lucas Alvares Gomes - Luigi Toscano - Luis Tomas Bolivar - Martin Kopec - mathieu bultel - Matthias Runge - Riccardo Pittau - Sergey - Stephen Finucane - Steve Baker - Takashi Kajinami - T. Nichole Williams - Tobias Urdin - Karolina Kula - User otherwiseguy - Yatin Karel *The Next Release Cycle* At the end of one release, focus shifts immediately to the next release i.e Zed. *Get Started* To spin up a proof of concept cloud, quickly, and on limited hardware, try an All-In-One Packstack installation. You can run RDO on a single node to get a feel for how it works. Finally, for those that don’t have any hardware or physical resources, there’s the OpenStack Global Passport Program. This is a collaborative effort between OpenStack public cloud providers to let you experience the freedom, performance and interoperability of open source infrastructure. You can quickly and easily gain access to OpenStack infrastructure via trial programs from participating OpenStack public cloud providers around the world. *Get Help* The RDO Project has the users(a)lists.rdoproject.org for RDO-specific users and operators. For more developer-oriented content we recommend joining the dev(a)lists.rdoproject.org mailing list. Remember to post a brief introduction about yourself and your RDO story. The mailing lists archives are all available at https://mail.rdoproject.org. You can also find extensive documentation on RDOproject.org. The #rdo channel on OFTC. IRC is also an excellent place to find and give help. We also welcome comments and requests on the CentOS devel mailing list and the CentOS and TripleO IRC channels (#centos, #centos-devel in Libera Chat network, and #tripleo on OFTC), however we have a more focused audience within the RDO venues. *Get Involved* To get involved in the OpenStack RPM packaging effort, check out the RDO contribute pages, peruse the CentOS Cloud SIG page, and inhale the RDO packaging documentation. Join us in #rdo and #tripleo on the OFTC IRC network and follow us on Twitter @RDOCommunity. You can also find us on Facebook and YouTube.

1 0

[magnum] Proposing Michal Nasiadka for core-reviewer
by Spyros Trigazis 27 Apr '22

27 Apr '22

Dear all, I would like to nominate Michal Nasiadka for core reviewer in the magnum project. Michal has been helping with reviews for the past cycles and proposed features and fixes regularly. He would be a great addition to the team. Cheers, Spyros

1 0

[cinder] This week's meeting (Today) will be in video+IRC
by Rajat Dhasmana 27 Apr '22

27 Apr '22

Hello Argonauts, This is a reminder email about this week's meeting i.e. Today (27 April) will be in video + IRC mode. The timings are same as regular cinder meeting i.e. 1400-1500 UTC. The meeting will be held in video[1] and IRC[2]. The reason to keep this in both ways is some people are more comfortable in written communication than verbal and vice versa so we can hold discussions in video or IRC as per author's wish. Also the roll call will happen on IRC and a summary will be given there as well so make sure you're connected to the IRC channel during the meeting. [1] connection info: https://bluejeans.com/556681290 [2] openstack-meeting-alt channel on IRC Thanks and regards Rajat Dhasmana

1 0

[openstack-ansible] Nominate Damian Dąbrowski for openstack-ansible core team
by Dmitriy Rabotyagov 26 Apr '22

26 Apr '22

Hi OSA Cores! I'm happy to nominate Damian Dąbrowski (damiandabrowski) to the core reviewers team. He has been doing a good job lately in reviewing incoming patches, helping out in IRC and participating in community activities, so I think he will be a good match for the Core Reviewers group. So I call for current Core Reviewers to support this nomination or raise objections to it until 22nd of April 2022. If no objections are raised we will add Damian to the team next week. -- Kind regards, Dmitriy Rabotyagov

5 5

[tc][all][ Zed Virtual PTG RBAC discussions Summary
by Ghanshyam Mann 26 Apr '22

26 Apr '22

Hello Everyone, I tried to attend the RBAC-related sessions on various projects[i] but I am sure I might have missed a few of them. I am summarizing the RBAC discussion on what open questions were from the project side and what we discussed in TC PTG. Feel free to append the discussion you had in your project or any query you want TC to solve. Current status: ------------------ * I have started this etherpad[ii] to track the status of this goal, please keep it up to date as you progress the work in your project. Open question: ------------------ 1. heat create_stack API calling the mixed scope APIs (for example create flavor and create server). what is best scope for heat API so that we do not have any security leak. We have not concluded the solution yet as we need the heat team also join the discussion and agree on that. But we have a few possible solutions listed below: ** Heat accepts stack API with system scope *** This means a stack with system resources would require a system admin role => Need to check with services relying on Heat ** Heat assigns a project-scope role to the requester during a processing stack operation and uses this project scope credential to manage project resources ** Heat starts accepting the new header accepting the extra token (say SYSTEM_TOKEN) and uses that to create/interact the system-level resource like create flavor. 2. How to isolate the host level attribute in GET APIs? (cinder and manila have the same issue). Cinder GET volume API response has the host information. One possible solution we discussed is to have a separate API to show the host information to the system user and the rest of the volume response to the project users only. This is similar to what we have in nova. Then we have a few questions from the Tacker side, where tacker create_vnf API internally call heat create_stack and they are planning to make create_vnf API for non-admin users. Direction on enabling the enforce scope by default ------------------------------------------------------------ As keystone, nova, and neutron are ready with the new RBAC, we wanted to enable the scope checks by default. But after seeing the lack of integration testing and the above mentioned open question (especially heat and any deployment project breaking) we decided to hold it. As the first step, we will migrate the tempest tests to the new RBAC and will enable the scope for these services in devstack. And based on the testing results we will decide on it. But after seeing the amount of work needed in Tempest and on the open question, I do not think we will be able to do it in the Zed cycle. Instead, we will target to enable the 'new defaults' by default. We ran out of time in TC and will continue the discuss these in policy popup meetings. I will push the schedule to Ml. [i] https://etherpad.opendev.org/p/rbac-zed-ptg [ii] https://etherpad.opendev.org/p/rbac-goal-tracking -gmann

2 2

[Triple0 on Centos Stream] Wallaby Overcloud Deployment Issue
by Lokendra Rathour 26 Apr '22

26 Apr '22

Hi Team, We were trying to install Openstack Wallaby Release on Centos Stream. As we were trying the overcloud deployment, getting this error: 2022-04-26 17:20:51.768 374850 INFO tripleoclient.heat_launcher [-] Skipping container image pull. 2022-04-26 17:20:51.776 374850 INFO tripleoclient.heat_launcher [-] Checking that database is up 2022-04-26 17:20:52.251 374850 INFO tripleoclient.heat_launcher [-] Checking that message bus (rabbitmq) is up Error: Source image rejected: Error reading signature from https://access.redhat.com/webassets/docker/content/sigstore/ubi8/pause@sha2…: status 403 (Forbidden) 2022-04-26 17:20:57.687 374850 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud [-] Exception occured while running the command: subprocess.CalledProcessError: Command '['sudo', 'podman', 'play', 'kube', '/home/stack/overcloud-deploy/overcloud/heat-launcher/heat-pod.yaml']' returned non-zero exit status 125. 2022-04-26 17:20:57.687 374850 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud Traceback (most recent call last): 2022-04-26 17:20:57.687 374850 ERROR tripleoclient.v1.overcloud_deploy.DeployOvercloud File "/usr/lib/python3.6/site-packages/tripleoclient/command.py", line 34, in run Please suggest. -- ~ Lokendra

2 2

[Kolla-ansible][Xena] Error deploying Cloudkitty
by wodel youchi 26 Apr '22

26 Apr '22

Hi, I am trying to deploy Cloudkitty, but I get this error message : TASK [cloudkitty : Creating Cloudkitty influxdb database] > ****************************************************** > task path: > /home/deployer/kollavenv/xenavenv/share/kolla-ansible/ansible/roles/cloudkitty/tasks/bootstrap.yml:36 fatal: [192.168.1.5 -> 192.168.1.5]: FAILED! => { > "action": "influxdb_database", > "changed": false, > "invocation": { > "module_args": { > "database_name": "cloudkitty", > "hostname": "dashint.cloud.cerist.dz", > "password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", > "path": "", > "port": 8086, > "proxies": {}, > "retries": 3, > "ssl": false, > "state": "present", > "timeout": null, > "udp_port": 4444, > "use_udp": false, > "username": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", > "validate_certs": true > } > }, > "msg": "('Connection aborted.', RemoteDisconnected('Remote end closed > connection without response',))" > } On the influxdb container I did this : > [root@controllerb ~]# docker ps | grep inf > 68b3ebfefbec > 192.168.1.16:4000/openstack.kolla/centos-source-influxdb:xena > "dumb-init --single-…" 22 minutes ago Up 22 minutes > influxdb > [root@controllerb ~]# docker exec -it influxdb /bin/bash > (influxdb)[influxdb@controllerb /]$ influx > Failed to connect to http://localhost:8086: Get http://localhost:8086/ping: > dial tcp [::1]:8086: connect: connection refused > Please check your connection settings and ensure 'influxd' is running. > (influxdb)[influxdb@controllerb /]$ ps -ef > UID PID PPID C STIME TTY TIME CMD > influxdb 1 0 0 Apr18 ? 00:00:00 dumb-init > --single-child -- kolla_start > influxdb 7 1 0 Apr18 ? 00:00:01 /usr/bin/influxd > -config /etc/influxdb/influxdb.conf > influxdb 45 0 0 00:12 pts/0 00:00:00 /bin/bash > influxdb 78 45 0 00:12 pts/0 00:00:00 ps -ef > (influxdb)[influxdb@controllerb /]$ I have no log file for influxdb, the directory is empty. Any ideas? Regards.

4 7

Setup infrastructure failing
by Derek O keeffe 26 Apr '22

26 Apr '22

Hi all, We get the following error in the openstack.osa.db_setup : Create database for service task: failed: [infra1_keystone_container-e54c8ba5 -> infra1_utility_container-1a1eb7ce(xx.xx.xx.xxx)] (item={'name': 'keystone', 'users': [{'username': 'keystone', 'password': 'PASSWORD'}]}) => {"ansible_loop_var": "item", "changed": false, "item": {"name": "keystone", "users": [{"password": "PASSWORD", "username": "keystone"}]}, "msg": "unable to connect to database, check login_user and login_password are correct or /root/.my.cnf has the credentials. Exception message: (2003, \"Can't connect to MySQL server on 'xx.xx.xx.xxx' ([Errno 111] Connection refused)\")"} Also, ansible galera_container -m shell -a "mysql -h localhost -e 'show status like \"%wsrep_cluster_%\";'" is different to the example output: infra1_galera_container-90dd1571 | CHANGED | rc=0 >>Variable_name Valuewsrep_cluster_weight 1wsrep_cluster_capabilities wsrep_cluster_conf_id 1wsrep_cluster_size 1wsrep_cluster_state_uuid c06b8107-c53a-11ec-a54c-a20664362f6cwsrep_cluster_status Primary We checked our infra node and all the containers are present and mysql is installed on the infra1-galera-container and port 3306 is open. MariaDB [(none)]> show databases;+--------------------+| Database |+--------------------+| information_schema || mysql || performance_schema || sys |+--------------------+4 rows in set (0.001 sec) We are not sure what is causing this and it could possibly be that we have forgotten/skipped/missed a configuration step but we have gone over the process multiple times and cannot see what we may have missed. The previous playbooks did have a lot of "skipped" results compute1 : ok=120 changed=2 unreachable=0 failed=0 skipped=31 rescued=0 ignored=0 compute2 : ok=120 changed=2 unreachable=0 failed=0 skipped=31 rescued=0 ignored=0 infra1 : ok=156 changed=3 unreachable=0 failed=0 skipped=31 rescued=0 ignored=0 infra1_aodh_container-7c703324 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_ceilometer_central_container-7590db72 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_cinder_api_container-91806531 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_galera_container-90dd1571 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_glance_container-fff39ac4 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_gnocchi_container-ffd32a8b : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_heat_api_container-a4079838 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_horizon_container-9c041ec0 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_keystone_container-e54c8ba5 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_memcached_container-dc50bcd8 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_neutron_server_container-bfc4d0d2 : ok=92 changed=37 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_nova_api_container-f231bb13 : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_placement_container-108d79df : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_rabbit_mq_container-50ca98ed : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_repo_container-ccade01d : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 infra1_utility_container-1a1eb7ce : ok=89 changed=36 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 localhost : ok=19 changed=0 unreachable=0 failed=0 skipped=14 rescued=0 ignored=0 compute1 : ok=0 changed=0 unreachable=0 failed=0 skipped=10 rescued=0 ignored=0 compute2 : ok=0 changed=0 unreachable=0 failed=0 skipped=10 rescued=0 ignored=0 infra1 : ok=38 changed=0 unreachable=0 failed=0 skipped=35 rescued=0 ignored=0 infra1_galera_container-90dd1571 : ok=69 changed=3 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 infra1_memcached_container-dc50bcd8 : ok=16 changed=0 unreachable=0 failed=0 skipped=4 rescued=0 ignored=0 infra1_rabbit_mq_container-50ca98ed : ok=69 changed=33 unreachable=0 failed=0 skipped=14 rescued=0 ignored=0 infra1_utility_container-1a1eb7ce : ok=40 changed=18 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 A lot were around Galera tasks but we are not sure if they were skipped intentionally as the playbooks ran to completion.Any help or troubleshooting steps would be appreciated. Thanks in advance. Regards,Derek

2 1

[skyline] skyline-console whl package question
by Satish Patel 26 Apr '22

26 Apr '22

Folks, I am compiling skyline-apiserver on my bare metal server and found Makefile pulling skyline-console tarball from the following location but that package doesn't contain the latest merged patches. Does CI job is broken which compiles this tarball ? https://tarballs.opendev.org/openstack/skyline-console/

2 2

[oslo][ops] Change in default logging format
by Stephen Finucane 26 Apr '22

26 Apr '22

I'm not sure how many people read release notes for the various oslo libraries, so I'm posting this here since it might have a minor impact for some tooling operators are using. We've just merged [1] which changes the default logging format used by oslo.log, configured using the '[DEFAULT] logging_context_format_string' config option. Previously, our logging format was: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s This looks like e.g. 2022-04-26 10:49:14.629 4187413 WARNING nova.conductor.api [req-ffddccd3-8804-4fc3-a2f3-a05af1eb569f - - - - -] This has now been modified to include the global request ID as well as the local request ID: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s This looks like e.g.: 2022-04-26 10:53:16.756 4187784 DEBUG nova.service [None req-f1698728-a2d6-4e02-a6b4-cf2cd398c02f - - - - -] Join ServiceGroup membership for this service compute This will affect pretty much all services using the out-of-the-box logging configuration. However, I suspect very few if any users are using the standard configuration. DevStack overrides '[DEFAULT] logging_context_format_string' for all services [2] and I suspect other installers probably do the same. If you are using the standard configuration, you might need to modify some log parsing/scraping tooling when this rolls around or manually set '[DEFAULT] logging_context_format_string' in your service configuration files. Cheers, Stephen [1] https://review.opendev.org/c/openstack/oslo.log/+/838190 [2] https://github.com/openstack/devstack/blob/3b0c035b9/functions#L677-L707

1 0

[all][neutron][neutron-vpnaas] Maintainers needed
by Lajos Katona 25 Apr '22

25 Apr '22

Hi, In the last few cycles neutron-vpnaas has no serious maintainers, and most patches merged were from Neutron core team or from Release team. Recently even neutron-vpnaas gate jobs started to fail. During the Zed PTG we discussed this topic (see [1]), For the maintenance we need someone to be the contact person for the project, who takes care of the project’s CI and review patches, answers bugs. Of course that’s only a minimal requirement. If the new maintainer works on new features for the project, it’s even better :) If we don’t have any new maintainer(s) before milestone Zed-2, which is July 11 - July 15 week according to [2], we will start marking neutron-vpnaas as deprecated and in the next cycle (AA, or perhapc 2023.1) we will propose to retire the project. So if You are using this project now, or if You have customers who are using it, please consider the possibility of maintaining it. Otherwise, please be aware that it is highly possible that the project will be deprecated and moved out from the official OpenStack projects. [1]: https://etherpad.opendev.org/p/neutron-zed-ptg#L201 [2]: https://releases.openstack.org/zed/schedule.html Lajos Katona (lajoskatona)

2 2

[cinder] how cinder gets the volume name when restore from a backup?
by Tony Liu 25 Apr '22

25 Apr '22

Hi, Here is what I do. * Create a volume. * Create a backup of this volume. * Delete the volume. * Restore the volume from backup. The restored volume has different UUID, but the same name. I don't see volume name is stored in backup metadata. How does Cinder know the volume name when restore it from backup, given the volume is already deleted? Thanks! Tony

2 2

retention policy for deleted resource in database
by Tony Liu 25 Apr '22

25 Apr '22

Hi, I see the record for deleted resource stay in database. What's the retention policy for those records? Is it configurable? Any manual cleanup is required? Thanks! Tony

2 2

[neutron] Bug Deputy Report Apr 18 - Apr 24
by Oleg Bondarev 25 Apr '22

25 Apr '22

Hello Team, Bug report for the week of Apr 18 is below. Two OVN bugs (including Invalid one) need triage from the OVN team. High ------ - https://bugs.launchpad.net/neutron/+bug/1969615 - OVS: flow loop is created with openvswitch version 2.16 - Opinion - seems more an issue in OVS rather than a bug in Neutron - Unassigned Undecided -------------- - https://bugs.launchpad.net/neutron/+bug/1969592 - [OVN] Frequent DB leader changes causes 'VIF creation failed' on nova side - New - Unassigned Invalid --------- - https://bugs.launchpad.net/neutron/+bug/1969354 - ovn-controller don't update new flows - Invalid - but reporter updated with additional info - Unassigned Thanks, Oleg

1 0

[ironic][ptg] Zed PTG Summary
by Iury Gregory 25 Apr '22

25 Apr '22

Hello Ironicers! Sorry for the delay to provide a summary about our PTG =) First of all, thank you to all contributors that took some time to join our sessions! During the sessions we had a peak of 13 attendees on the last three days. Day1 We only had two topics: Feedback about the Yoga Cycle and What should we do about specs. During the of we did a retrospective about the Yoga Cycle, we discussed the good and bad things that happened during the cycle and how we can make things better. In the discussion about what we should do about specs we come up with some ideas to improve our process when we think a spec should be required. Day2: On this day most of the discussions were around topics that can be managing machines. How we can decrease the cost of Data Centers that needs to keep all their machine on even if they are not active or taking minimal load, we would provide a way to power tuning nodes that are already deployed (in the ironic perspective this is a way to reconfigure a node that is already active), we also talked about turning down power usage if we are able to identify that IPA is idle. The custom deploy timeout topic had no strong objections, since we have a single configuration that handles the timeout for all steps we think we can improve this, we still need to define some details related to the implementation after we have the RFE. We discussed how we can generate the inspector.ipxe configuration if we notice some changes in the configuration of the deployment. Day3: We started this day looking at the survey results, this gave us some ideas on possible areas we should improve. The ironic safeguard topic was focusing on two main things: queuing (limit the max number of concurrent cleaning operations) and data disk protection (only clean the root disk (or give a list of skip-disks/disks-to-clean). The community decided that this seems like a good idea and we defined some of the possible paths forwards related to how it could be implemented. The redfish gateway and related ideas topic brought an interesting idea to have an ironic driver that can execute a "script" that is required for their HW to start working properly, there is a recording from the first meeting that can provide more details =). The per-node clean steps topic had no objections, we think this will improve the operators experience for scenarios where they would need specific steps for running on a node that has different disk configuration. Day4: Most of the topics on this day were focused on networking. We discussed the status of OVN DHCP support and how we will move forward on our side to make things work after Neutron and OVN have all the necessary bits in place. During the next topic we talked about adding device configuration capabilities for networking-baremetal since in multi-tenant BMaaS there is a need to configure the ToR network devices (Access/Edge Switches) and many vendors have abandoned their ML2 mechanism plug-ins to support this, so now we are looking to add support for new mechanisms that have more features that could improve the operators experience. We focused on discussing the pros/cons about Netconf and Yang but also other alternatives solutions. The other topic we discussed were: - netboot deprecation: we discussed how we should move forward with some of our testing for partition images + UEFI. - Bluefield DPU: not much discussion since we didn't have many folks interested on the topic. - Anaconda driver: we talked about how we can get a CI for testing the driver. You can find more information about the topics and the discussions in our etherpad: https://etherpad.opendev.org/p/ironic-zed-ptg -- *Att[]'sIury Gregory Melo Ferreira * *MSc in Computer Science at UFCG* *Part of the ironic-core and puppet-manager-core team in OpenStack* *Software Engineer at Red Hat Czech* *Social*: https://www.linkedin.com/in/iurygregory *E-mail: iurygregory(a)gmail.com <iurygregory(a)gmail.com>*

1 0

[largescale-sig] Skipping meeting this week
by Thierry Carrez 25 Apr '22

25 Apr '22

Hi everyone, Due to a shortage of participants and meeting chairs, we will skip the meeting planned this week for the Large Scale SIG. Our next meeting will be May 11th at 15UTC in #openstack-operators. You can add topics to discuss to our agenda etherpad: https://etherpad.opendev.org/p/large-scale-sig-meeting Regards, -- Thierry Carrez (ttx)

1 0

error
by Firas Hlel 25 Apr '22

25 Apr '22

Firas Hlel <firashlel750(a)gmail.com> jeu. 21 avr. 09:02 (il y a 4 jours) À openstack-discuss Hi all, I am working on a project Openstack in linux ubuntu 20.04. I want to create a cluster hadoop with one master-node and three worker-nodes and i have a problem with a cluster that doesn't work. Status ERROR: Creating cluster failed for the following reason(s): Failed to create trust Error ID: ef5e8b0a-8e6d-4878-bebb-f37f4fa50a88, Failed to create trust Error ID: 43157255-86af-4773-96c1-a07ca7ac66ed. links: https://docs.openstack.org/devstack/latest/ File local.conf : [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=secret RABBIT_PASSWORD=secret SERVICE_PASSWORD=$ADMIN_PASSWORD HOST_IP=10.0.2.15 LOGFILE=$DEST/logs/stack.sh.log SWIFT_REPLICAS=1SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 SWIFT_DATA_DIR=$DEST/data enable_plugin sahara https://opendev.org/openstack/sahara enable_plugin sahara-dashboard https://opendev.org/openstack/sahara-dashboard enable_plugin heat https://opendev.org/openstack/heat Can you guys advise me about these errors. Is there anything to worry about?

1 0

[openstack-helm] No Meeting This Week
by Gage Hugo 24 Apr '22

24 Apr '22

Hey team, Since I will be busy during our normal meeting time this week and there's nothing on the agenda, the meeting for this week has been cancelled. We will meet again next week at the usual time. Thanks

1 0

[Xena][Cloudkitty] I have no rating in the dashboard
by wodel youchi 24 Apr '22

24 Apr '22

Hi, I've deployed Cloudkitty using Kolla-ansible, then I followed this example to test if the service is working : https://docs.openstack.org/cloudkitty/xena/user/rating/hashmap.html#examples I don't fully understand the service. I waited a day, and until now I don't have any results. The only errors I had is this once is : 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator [-] [scope: a50e58ff494441b3b78ab096bca747d9, worker: 0 ] Error while collecting metric image.size at timestamp 2022-04-01 00:00:00+01:00: {'cause': "Metrics can't being aggregated", 'reason': 'Granularities are missing', 'detail': [['image.size', 'mean', 3600.0]]} (HTTP 400). Exiting.: gnocchiclient.exceptions.BadRequest: {'cause': "Metrics can't being aggregated", 'reason': 'Granularitie:are missing', 'detail': [['image.size', 'mean', 3600.0]]} (HTTP 400) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator Traceback (most recent call last): 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/cloudkitty/orchestrator.py", line 308, in _get_result 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator return self._collect(metric, timestamp) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/cloudkitty/orchestrator.py", line 297, in _collect 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator self._tenant_id, 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/cloudkitty/collector/__init__.py", line 240, in retrieve 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator q_filter=q_filter, 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/cloudkitty/collector/gnocchi.py", line 450, in fetch_all 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator q_filter=q_filter, 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/cloudkitty/collector/gnocchi.py", line 329, in _fetch_metric 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator measurements = self._conn.aggregates.fetch(op, **agg_kwargs) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/gnocchiclient/v1/aggregates.py", line 72, in fetch 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator data=ujson.dumps(data)).json() 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/gnocchiclient/v1/base.py", line 41, in _post 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator return self.client.api.post(*args, **kwargs) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/keystoneauth1/adapter.py", line 401, in post 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator return self.request(url, 'POST', **kwargs) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator File "/var/lib/kolla/venv/lib/python3.6/site-packages/gnocchiclient/client.py", line 52, in request 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator raise exceptions.from_response(resp, method) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator gnocchiclient.exceptions.BadRequest: {'cause': "Metrics can't being aggregated", 'reason': 'Granularities are missing', 'detail': [['image.size', 'mean', 3600.0]]} (HTTP 400) 2022-04-20 11:57:37.834 31 ERROR cloudkitty.orchestrator I searched the web and I found this post : https://storyboard.openstack.org/#!/story/2008598 Could that be the problem? If so , how to correct it? i tried to create this file on my kolla-ansible deployer vim /etc/kolla/config/cloudkitty.conf [DEFAULT] debug = True [collect] metrics_conf = /etc/*cloudkitty-api*/metrics.yml (I don't know if this path is correct, since there is no /etc/cloudkitty on the nodes) And I created a directory like this : mkdir /etc/kolla/config/cloudkitty/ wget https://raw.githubusercontent.com/openstack/cloudkitty/master/etc/cloudkitt… -O /etc/kolla/config/cloudkitty/metrics.yml I executed then kolla-ansible -i multinode reconfigure -t cloudkitty All I have in the logs is : 2022-04-21 15:13:32.691 8 INFO cotyledon._service_manager [-] Child 1304 exited with status 1 2022-04-21 15:13:32.693 8 INFO cotyledon._service_manager [-] Child 1310 exited with status 1 2022-04-21 15:13:32.695 8 INFO cotyledon._service_manager [-] Child 1312 exited with status 1 2022-04-21 15:13:32.697 8 INFO cotyledon._service_manager [-] Child 1314 exited with status 1 2022-04-21 15:13:33.097 8 INFO cotyledon._service_manager [-] Child 1325 exited with status 1 2022-04-21 15:13:33.101 8 INFO cotyledon._service_manager [-] Child 1327 exited with status 1 2022-04-21 15:13:33.102 8 INFO cotyledon._service_manager [-] Forking too fast, sleeping 2022-04-21 15:13:38.109 8 INFO cotyledon._service_manager [-] Child 1329 exited with status 1 2022-04-21 15:13:38.112 8 INFO cotyledon._service_manager [-] Child 1331 exited with status 1 2022-04-21 15:13:38.114 8 INFO cotyledon._service_manager [-] Child 1333 exited with status 1 Any ideas? Regards.

1 1

Re: Openstack Trove - Polling request timed out
by Hirotaka Wakabayashi 23 Apr '22

23 Apr '22

Hello Manish! "openstack database instance show" command shows you the current status of an instance. If the status is not ACTIVE, guest-agent fails to start the database service for some reasons. Please see the following page for further debug. https://docs.openstack.org/trove/latest/admin/troubleshooting.html FYI: I think the error occurs here in your case. https://opendev.org/openstack/trove/src/branch/master/trove/taskmanager/mod… Best Regards, Hirotaka On Saturday, April 23, 2022, 12:05:26 AM GMT+9, openstack-discuss-request(a)lists.openstack.org <openstack-discuss-request(a)lists.openstack.org> wrote: Send openstack-discuss mailing list submissions to openstack-discuss(a)lists.openstack.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss or, via email, send a message with subject or body 'help' to openstack-discuss-request(a)lists.openstack.org You can reach the person managing the list at openstack-discuss-owner(a)lists.openstack.org When replying, please edit your Subject line so it is more specific than "Re: Contents of openstack-discuss digest..." Today's Topics: 1. Openstack Trove - Polling request timed out (Manish Bharti) ---------------------------------------------------------------------- Message: 1 Date: Fri, 22 Apr 2022 17:00:31 +0530 From: Manish Bharti <manishbhartigt(a)gmail.com> To: openstack-discuss(a)lists.openstack.org Subject: Openstack Trove - Polling request timed out Message-ID: <CAFTsyOU7D3xf9c4tYb8KhnJQePjCBJvTK_ccHxAOntz_ia69Cg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Dear Team, We are trying to deploy OpenStack environment for our application and while deploying trove service we are facing the below error(attached screenshot)- Traceback (most recent call last): File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 207, in wait_for_task return polling_task.wait() File "/usr/lib/python3/dist-packages/eventlet/event.py", line 125, in wait result = hub.switch() File "/usr/lib/python3/dist-packages/eventlet/hubs/hub.py", line 313, in switch return self.greenlet.switch() File "/usr/lib/python3/dist-packages/oslo_service/loopingcall.py", line 154, in _run_loop idle = idle_for_func(result, self._elapsed(watch)) File "/usr/lib/python3/dist-packages/oslo_service/loopingcall.py", line 349, in _idle_for raise LoopingCallTimeOut( oslo_service.loopingcall.LoopingCallTimeOut: Looping call timed out after 870.99 seconds During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/trove/taskmanager/models.py", line 434, in wait_for_instance utils.poll_until(self._service_is_active, File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 223, in poll_until return wait_for_task(task) File "/usr/lib/python3/dist-packages/trove/common/utils.py", line 209, in wait_for_task raise exception.PollTimeOut trove.common.exception.PollTimeOut: Polling request timed out. Please help us on this issue. -- Thank you , Manish Bharti Jodhpur, Raj - 342001. Contact:8875033000

1 0

[all][tc] What's happening in Technical Committee: summary April 15th, 21: Reading: 10 min
by Ghanshyam Mann 22 Apr '22

22 Apr '22

Hello Everyone, Here is this week's summary of the Technical Committee activities. 1. TC Meetings: ============ * We had this week's meeting on April 21. Most of the meeting discussions are summarized below ( Completed or in-progress activities section). Meeting full logs are available @https://meetings.opendev.org/meetings/tc/2022/tc.2022-04-21-15.00.html * Next TC weekly meeting will be on April 28 Thursday at 15:00 UTC, feel free to add the topic on the agenda[1] by April 27. 2. What we completed this week: ========================= * Updated sushy-oem-idrac from x/ to /openstack/ namespace[2] 3. Activities In progress: ================== TC Tracker for Zed cycle ------------------------------ * Zed tracker etherpad includes the TC working items[3]. We completed the assigned of each item and will continue tracking the progress biweekly. Open Reviews ----------------- * Eight open reviews for ongoing activities[4]. Migration from old ELK service to new Dashboard ----------------------------------------------------------- You might know that Daniel was working to bring the log search dashboard on OpenSearch and he is ready with it and the new dashboard[5] is ready to use. He will send the details about it to ML soon. He is investigating on elactic-recheck instance to be up. The new dashboard is maintained under the OpenStack tact SIG and you can reach out to Daniel on #openstack-infra channel. Please use and provide feedback about this new dashboard to make the upstream failure debugging easy. We also discussed the OpenDev request to shut down the old ELK server and agree to do that. Drop the lower constraints maintenance ------------------------------------------------ The TC resolution to drop the lower constraints testing is under review[6], and open for the feedback[7] Consistent and Secure Default RBAC -------------------------------------------- I have scheduled the discussion for coming Tuesday 26th 14:30 UTC [8], We will target the heat discussion and if time permits then cinder queries. If you have any other questions specific to your project, please add them to the etherpad[9] FIPs community-wide goal ------------------------------- As discussed in PTG, we agreed to select this as per the new milestone. Ade has proposed the milestone update and ready for feedback[10]. Removing the TC Liaisons framework -------------------------------------------- As discussed in PTG, I have proposed the removal of TC liaisons[11] and it's under review. 2021 User Survey TC Question Analysis ----------------------------------------------- No update on this. The survey summary is up for review[12]. Feel free to check and provide feedback. Zed cycle Leaderless projects ---------------------------------- No updates on this. Only Adjutant project is leaderless/maintainer-less. We will check Adjutant's situation again on ML and hope Braden will be ready with their company side permission[13]. Fixing Zuul config error ---------------------------- Requesting projects with zuul config error to look into those and fix them which should not take much time[14]. Project updates ------------------- * Add the cinder-three-par charm to Openstack charms[15] 4. How to contact the TC: ==================== If you would like to discuss or give feedback to TC, you can reach out to us in multiple ways: 1. Email: you can send the email with tag [tc] on openstack-discuss ML[16]. 2. Weekly meeting: The Technical Committee conduct a weekly meeting every Thursday 15 UTC [17] 3. Ping us using 'tc-members' nickname on #openstack-tc IRC channel. [1] https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting [2] https://review.opendev.org/c/openstack/governance/+/838486 [3] https://etherpad.opendev.org/p/tc-zed-tracker [4] https://review.opendev.org/q/projects:openstack/governance+status:open [5] https://docs.openstack.org/project-team-guide/testing.html#checking-status-… [6] https://review.opendev.org/c/openstack/governance/+/838004 [7] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028199.ht… [8] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028258.ht… [9] https://etherpad.opendev.org/p/rbac-zed-ptg [10] https://review.opendev.org/c/openstack/governance/+/838601 [11] https://review.opendev.org/c/openstack/governance/+/837891 [12] https://review.opendev.org/c/openstack/governance/+/836888 [13] http://lists.openstack.org/pipermail/openstack-discuss/2022-March/027626.ht… [14] https://etherpad.opendev.org/p/zuul-config-error-openstack [15] https://review.opendev.org/c/openstack/governance/+/837781 [16] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss [17] http://eavesdrop.openstack.org/#Technical_Committee_Meeting -gmann

1 1

Openstack Ansible error
by Derek O keeffe 22 Apr '22

22 Apr '22

Hi all, I've been working through deploying Openstack ansible when I run the first playbook (setup hosts) it fails with the following error: An exception occurred during task execution. To see the full traceback, use -vvv. The error was: jinja2.exceptions.TemplateRuntimeError: No filter named 'ipaddr' found.failed: [infra1_keystone_container-fb7ae0f1] (item={'key': 'container_address', 'value': {'address': 'xx.xx.xx.xxx', 'bridge': 'br-mgmt', 'interface': 'eth1', 'netmask': '255.255.255.0', 'type': 'veth'}}) => {"ansible_loop_var": "item", "changed": false, "item": {"key": "container_address", "value": {"address": "xx.xx.xx.xxx", "bridge": "br-mgmt", "interface": "eth1", "netmask": "255.255.255.0", "type": "veth"}}, "msg": "TemplateRuntimeError: No filter named 'ipaddr' found."} I have followed this fix: https://bugs.launchpad.net/openstack-ansible/+bug/1963686 But, unfortunately the error still occurs. I am in the process of troubleshooting and if I find a resolution I will post for anyone in a similar position but in the mean time if anyone has a fix/workaround for this issue it would be greatly appreciated. Regards,Derek

2 1

[neutron] Drivers meeting - Friday 22.4.2022 - cancelled
by Lajos Katona 21 Apr '22

21 Apr '22

Hi Neutron Drivers! Due to the lack of agenda, let's cancel today's drivers meeting (sorry for the late mail...). See You on the meeting next week. Lajos Katona (lajoskatona)

1 0

OpenStack Yoga for Ubuntu 22.04 LTS and Ubuntu 20.04 LTS
by Corey Bryant 21 Apr '22

21 Apr '22

The Ubuntu OpenStack team at Canonical is pleased to announce the general availability of OpenStack Yoga on Ubuntu 22.04 LTS (Jammy Jellyfish) and Ubuntu 20.04 LTS (Focal Fossa) via the Ubuntu Cloud Archive. Details of the Yoga release can be found at: https://www.openstack.org/software/yoga To get access to the Ubuntu Yoga packages: == Ubuntu 22.04 LTS == OpenStack Yoga is available by default on Ubuntu 22.04. == Ubuntu 20.04 LTS == The Ubuntu Cloud Archive for OpenStack Yoga can be enabled on Ubuntu 20.04 by running the following command: sudo add-apt-repository cloud-archive:yoga The Ubuntu Cloud Archive for Yoga includes updates for: aodh, barbican, ceilometer, ceph (17.1.0), cinder, designate, designate-dashboard, dpdk (21.11), glance, gnocchi, heat, heat-dashboard, horizon, ironic, ironic-ui, keystone, libvirt (8.0.0), magnum, magnum-ui, manila, manila-ui, masakari, mistral, murano, murano-dashboard, networking-arista, networking-bagpipe, networking-baremetal, networking-bgpvpn, networking-hyperv, networking-l2gw, networking-mlnx, networking-odl, networking-sfc, neutron, neutron-dynamic-routing, neutron-fwaas, neutron-vpnaas, nova, octavia, octavia-dashboard, openstack-trove, openvswitch (2.17.0), ovn (22.03.0), ovn-octavia-provider, placement, sahara, sahara-dashboard, senlin, swift, trove-dashboard, vmware-nsx, vitrage, watcher, watcher-dashboard, zaqar, and zaqar-ui. For a full list of packages and versions, please refer to: https://openstack-ci-reports.ubuntu.com/reports/cloud-archive/yoga_versions… == Reporting bugs == If you have any issues please report bugs using the ‘ubuntu-bug’ tool to ensure that bugs get logged in the right place in Launchpad: sudo ubuntu-bug nova-conductor Thank you to everyone who contributed to OpenStack Yoga! Corey (on behalf of the Ubuntu OpenStack Engineering team)

1 0

[Xena][Gnocchi] gnocchi_statsd become unhealthy after some time
by wodel youchi 21 Apr '22

21 Apr '22

Hi, Recently we deployed Openstack Xena using Kollla-ansible, we noticed that gnocchi_statsd become unhealthy after a period of time, we restarted it several times, it shows a healthy state, but hours after it becomes unhealthy [root@controllera ~]# docker ps | grep gnocch fcc31e240322 192.168.1.16:4000/openstack.kolla/centos-source-gnocchi-statsd:xena "dumb-init --single-…" 45 hours ago Up 24 hours (unhealthy) gnocchi_statsd The log file don't show anything special, you can find all gnocchi logs attached. How can we figure out what causes this?

1 0

error openstack
by Firas Hlel 21 Apr '22

21 Apr '22

Hi all, I am working on a project Openstack in linux ubuntu 20.04. I want to create a cluster hadoop with one master-node and three worker-nodes and i have a problem with a cluster that doesn't work. Status ERROR: Creating cluster failed for the following reason(s): Failed to create trust Error ID: ef5e8b0a-8e6d-4878-bebb-f37f4fa50a88, Failed to create trust Error ID: 43157255-86af-4773-96c1-a07ca7ac66ed. links: https://docs.openstack.org/devstack/latest/ File local.conf : [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=secret RABBIT_PASSWORD=secret SERVICE_PASSWORD=$ADMIN_PASSWORD HOST_IP=10.0.2.15 LOGFILE=$DEST/logs/stack.sh.log SWIFT_REPLICAS=1SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 SWIFT_DATA_DIR=$DEST/data enable_plugin sahara https://opendev.org/openstack/sahara enable_plugin sahara-dashboard https://opendev.org/openstack/sahara-dashboard enable_plugin heat https://opendev.org/openstack/heat Can you guys advise me about these errors. Is there anything to worry about?

1 0

[glance][devstack][tripleo][ansible][ceph_admin] Glance moving away from single store Configuration
by Abhishek Kekane 20 Apr '22

20 Apr '22

Hello Everyone, Glance has added support to configure multiple stores as a store backend in Stein cycle, and it is very stable now. So in upcoming cycles we are going to remove single store support and use multiple stores support only (PS. you can configure a single store using multiple stores configuration options). As a first step, we have started adding support in devstack [1][2][3] for configuring glance as multiple stores for each of the glance store backend. This cycle we are going to default multistore configuration in devstack so that our gate/check (CI) jobs should test using the same. Following cycles we will start removing single store support from glance code base. If you have any questions related to this work kindly revert back to this mail or you can join us in our weekly meeting, every Thursday at 1400 UTC #openstack-meeting IRC channel as well. [1] https://review.opendev.org/c/openstack/devstack/+/741654 [2] https://review.opendev.org/c/openstack/devstack-plugin-ceph/+/741801/ [3] https://review.opendev.org/c/openstack/devstack/+/741802 Thank you, Abhishek Kekane

3 4

[dev][horizon] Integration of the ec2 feature
by lab reporting 20 Apr '22

20 Apr '22

Hello, We will add EC2 token management within the Horizon project. As a reminder, EC2 Credentials service allows the creation of access/secret credentials used for the ec2 interop layer of OpenStack to authorize S3 requests. It is part of the package keystone.contrib Do you think this development is of interest to the community ? Do you think this development can be built into the core? And if so, should we insert into the panel group dedicated to object storage or into the identity panel ? Thank you in advance for your answers. Best Regards, Tony

1 0

Question on monkey-patching paramiko for FIPS
by Ade Lee 20 Apr '22

20 Apr '22

Hi all, As many have already seen, a number of changes have been merged in OpenStack as part of the effort to allow OpenStack to run on FIPS enabled systems. This effort has been captured in a proposed community goal. [1]. One of the requirements for this effort is that md5sum() not be used in a security related context. In fact, python 3.9 has been modified to raise an exception of hashlib.md5sum() is called on a FIPS enabled system, unless it is explicitly annotated with a usedforsecurity=False attribute [2]. We added a wrapper for md5sum in oslo.config to take advantage of this attribute. [3,4,5] Where we have less control is in libraries used by Openstack - and in particular, paramiko. Paramiko fails on FIPS enabled systems because of a call to md5sum() in get_fingerprint(). A patch has been submitted to fix this problem. [6]. Unfortunately, it takes a very long time for paramiko to fix issues. In order for us to make progress on FIPS testing, a small monkey-patch for paramiko was checked into tempest. [7]. Because this change was made to a test tool, this patch was relatively uncontroversial. A similar change has been found to be needed for manila [8]. I would expect that a similar change will be needed in other components that use paramiko to SSH to other systems (eg. cinder, neutron?) I suspect that the only reason this has not been detected in FIPS testing more widely yet is because the components that use paramiko for SSH are being tested in third party tests that do not, as yet, test FIPS. At the request of the manila team, I am bringing this monkey-patch to the attention of the wider OpenStack community to get feedback on the pros and cons of applying this monkey-patch. A couple things to note: 1. This monkey patch is quite small in scope and only needed until paramiko fixes the issue. 2. paramiko is not FIPS compliant, and so we will ultimately need to fix paramiko or replace it with a different library on FIPS enabled systems. When we do this, we would remove the monkey patch. Thanks, Ade Lee [1] https://opendev.org/openstack/governance/src/branch/master/goals/proposed/f… [2] https://bugs.python.org/issue9216 [3] https://review.opendev.org/c/openstack/oslo.utils/+/750031 [4] Patches to various projects to use oslo.utils adapter for hashlib.md5 (as examples): glance: https://review.opendev.org/c/openstack/glance/+/756158 nova: https://review.opendev.org/c/openstack/nova/+/756434 nova: https://review.opendev.org/c/openstack/nova/+/777686 os-brick: https://review.opendev.org/c/openstack/os-brick/+/756151 oslo: https://review.opendev.org/c/openstack/oslo.versionedobjects/+/756153 tooz: https://review.opendev.org/c/openstack/tooz/+/756432 opensdk: https://review.opendev.org/c/openstack/openstacksdk/+/767411 octavia: https://review.opendev.org/c/openstack/octavia/+/798146 designate: https://review.opendev.org/c/openstack/designate/+/798157 glance_store: https://review.opendev.org/c/openstack/glance_store/+/756157 [5] Swift patch to handle hashlib.md5 https://review.opendev.org/c/openstack/swift/+/751966 [6] https://github.com/paramiko/paramiko/pull/1928 [7] https://review.opendev.org/c/openstack/tempest/+/822560 [8] https://review.opendev.org/c/openstack/manila/+/819375

3 2

Deployment system includes: Ussuri, Brocade X7-8
by Duc Loi 20 Apr '22

20 Apr '22

Hi Everyone, In the near future, we will deploy a system including Ussuri and Brocade X7-8 according to customer requirements. But Brocade has made a notice not to support versions after Train. Has anyone implemented a system similar? What are the challenges you face? What solutions can fix it? Thanks and Best Regards

1 0

[all][tc] Technical Committee next weekly meeting on April 21 at 1500 UTC
by Ghanshyam Mann 20 Apr '22

20 Apr '22

Hello Everyone, Technical Committee's next weekly meeting is scheduled for April 21 at 1500 UTC. If you would like to add topics for discussion, please add them to the below wiki page by Wednesday, April 20, at 2100 UTC. https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting -gmann

1 1

OPS Meetup Registration
by Amy Marrich 20 Apr '22

20 Apr '22

Registration is now open for the OPS Meetup to be held Friday right after the Summit. https://www.eventbrite.com/e/openstack-ops-meetup-tickets-322813472787 And don't forget you can still add topics: https://etherpad.opendev.org/p/april2022-ptg-openstack-ops Thanks, Amy (spotz)

1 0

[cinder] Bug deputy report for week of 04-20-2022
by Sofia Enriquez 20 Apr '22

20 Apr '22

This is a bug report from 04-13-2022 to 04-20-2022. Agenda: https://etherpad.opendev.org/p/cinder-bug-squad-meeting ----------------------------------------------------------------------------------------- Medium - https://bugs.launchpad.net/cinder/+bug/1969366 "Backend incorrectly reporting cacheable capability." Assigned to Gorka. - https://bugs.launchpad.net/cinder/+bug/1969408 "[RBD] Cinder fails to retype / migrate large volumes." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1967481 "[Storwize_SVC]Retype operation failure for GMCV due to update_clean_rate." Unassigned. - https://bugs.launchpad.net/cinder/+bug/1968164 "Incorrectly shown volume size while using PowerFlex cinder driver." Fix proposed to master. Low - https://bugs.launchpad.net/cinder/+bug/1967686 "[DEFAULT] use_forwarded_for is a duplicate of the HTTPProxyToWSGI middleware." Assigned to Takashi Kajinami. - https://bugs.launchpad.net/cinder/+bug/1968048 "Pylint tox environment fails on Fedora 35." Fix proposed to master. - https://bugs.launchpad.net/cinder/+bug/1968159 "[IBM Storwize] Retype failure for replication volume-type." Fix proposed to master. Invalid - https://bugs.launchpad.net/cinder/+bug/1969213 "When image properties contain "signature_verified" field，create volume from image wil fail." Unassigned. Cheers -- Sofía Enriquez she/her Software Engineer Red Hat PnT <https://www.redhat.com> IRC: @enriquetaso @RedHat <https://twitter.com/redhat> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> <https://www.redhat.com>

1 0

ERROR CREATING CLUSTER
by Firas Dehech 20 Apr '22

20 Apr '22

Hi all, I am working on a project Openstack in linux ubuntu 20.04. I want to create a cluster hadoop with one master-node and three worker-nodes and i have a problem with a cluster that doesn't work. Status ERROR: Creating cluster failed for the following reason(s): Failed to create trust Error ID: ef5e8b0a-8e6d-4878-bebb-f37f4fa50a88, Failed to create trust Error ID: 43157255-86af-4773-96c1-a07ca7ac66ed. links: https://docs.openstack.org/devstack/latest/ File local.conf : [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=secret RABBIT_PASSWORD=secret SERVICE_PASSWORD=$ADMIN_PASSWORD HOST_IP=10.0.2.15 LOGFILE=$DEST/logs/stack.sh.log SWIFT_REPLICAS=1SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 SWIFT_DATA_DIR=$DEST/data enable_plugin sahara https://opendev.org/openstack/sahara enable_plugin sahara-dashboard https://opendev.org/openstack/sahara-dashboard enable_plugin heat https://opendev.org/openstack/heat Can you guys advise me about these errors. Is there anything to worry about? Regards.

1 0

[security][security sig] Stepping down as chair
by Gage Hugo 19 Apr '22

19 Apr '22

Hey folks, I've been serving as the Security SIG chair for over 4 years now and throughout my entire time as chair I've had the wonderful experience of learning and working alongside several excellent individuals. It also has given me the great opportunity to have multiple discussions on the topic of security with the community as a whole which helped me grow my knowledge base and career. However, with my focus shifting away from pure OpenStack work and the rather long time that 4 years is, I believe it's time for someone with a fresh perspective to have the opportunity to step into the role and help guide the Security SIG into the future. I am stepping down from the role of Security SIG chair as of today, but I plan on sticking around in the SIG for as long as I can. I hope to continue contributing when I can and I will be around to help anyone who is interested in the role of chair. I'd like to give a big thank you to Jeremy Stanley (fungi) for all the help he provided throughout my time as chair and continues to do so to this day whenever I have a question and need help. He helped me step into the chair role and I am sure he will also help anyone who is interested in the role as well. Thanks again for the opportunity and I hope to see you all around! - Gage Hugo

1 0

[Kolla-ansible][Xena][Ceph-RGW] need help configuring Ceph RGW for Swift and S3 access
by wodel youchi 19 Apr '22

19 Apr '22

Hi, I am having trouble configuring Openstack to use Ceph RGW as the Object store backend for Swift and S3. My setup is an HCI, I have 3 controllers which are also my ceph mgrs, mons and rgws and 9 compte/storage servers (osds). Xena is deployed with Ceph Pacific. Ceph public network is a private network on vlan10 with 10.10.1.0/24 as a subnet. Here is a snippet from my globals.yml : > --- > kolla_base_distro: "centos" > kolla_install_type: "source" > openstack_release: "xena" > kolla_internal_vip_address: "10.10.3.1" > kolla_internal_fqdn: "dashint.cloud.example.com" > kolla_external_vip_address: "x.x.x.x" > kolla_external_fqdn: "dash.cloud.example.com " > docker_registry: 192.168.1.16:4000 > network_interface: "bond0" > kolla_external_vip_interface: "bond1" > api_interface: "bond1.30" > *storage_interface: "bond1.10" <---------------- VLAN10 (public ceph > network)* > tunnel_interface: "bond1.40" > dns_interface: "bond1" > octavia_network_interface: "bond1.301" > neutron_external_interface: "bond2" > neutron_plugin_agent: "openvswitch" > keepalived_virtual_router_id: "51" > kolla_enable_tls_internal: "yes" > kolla_enable_tls_external: "yes" > kolla_certificates_dir: "{{ node_config }}/certificates" > kolla_external_fqdn_cert: "{{ kolla_certificates_dir }}/haproxy.pem" > kolla_internal_fqdn_cert: "{{ kolla_certificates_dir > }}/haproxy-internal.pem" > kolla_admin_openrc_cacert: "{{ kolla_certificates_dir }}/ca.pem" > kolla_copy_ca_into_containers: "yes" > kolla_enable_tls_backend: "yes" > kolla_verify_tls_backend: "no" > kolla_tls_backend_cert: "{{ kolla_certificates_dir }}/backend-cert.pem" > kolla_tls_backend_key: "{{ kolla_certificates_dir }}/backend-key.pem" > enable_openstack_core: "yes" > enable_hacluster: "yes" > enable_haproxy: "yes" > enable_aodh: "yes" > enable_barbican: "yes" > enable_ceilometer: "yes" > enable_central_logging: "yes" > > *enable_ceph_rgw: "yes"enable_ceph_rgw_loadbalancer: "{{ enable_ceph_rgw | > bool }}"* > enable_cinder: "yes" > enable_cinder_backup: "yes" > enable_collectd: "yes" > enable_designate: "yes" > enable_elasticsearch_curator: "yes" > enable_freezer: "no" > enable_gnocchi: "yes" > enable_gnocchi_statsd: "yes" > enable_magnum: "yes" > enable_manila: "yes" > enable_manila_backend_cephfs_native: "yes" > enable_mariabackup: "yes" > enable_masakari: "yes" > enable_neutron_vpnaas: "yes" > enable_neutron_qos: "yes" > enable_neutron_agent_ha: "yes" > enable_neutron_provider_networks: "yes" > enable_neutron_segments: "yes" > enable_octavia: "yes" > enable_trove: "yes" > external_ceph_cephx_enabled: "yes" > ceph_glance_keyring: "ceph.client.glance.keyring" > ceph_glance_user: "glance" > ceph_glance_pool_name: "images" > ceph_cinder_keyring: "ceph.client.cinder.keyring" > ceph_cinder_user: "cinder" > ceph_cinder_pool_name: "volumes" > ceph_cinder_backup_keyring: "ceph.client.cinder-backup.keyring" > ceph_cinder_backup_user: "cinder-backup" > ceph_cinder_backup_pool_name: "backups" > ceph_nova_keyring: "{{ ceph_cinder_keyring }}" > ceph_nova_user: "cinder" > ceph_nova_pool_name: "vms" > ceph_gnocchi_keyring: "ceph.client.gnocchi.keyring" > ceph_gnocchi_user: "gnocchi" > ceph_gnocchi_pool_name: "metrics" > ceph_manila_keyring: "ceph.client.manila.keyring" > ceph_manila_user: "manila" > glance_backend_ceph: "yes" > glance_backend_file: "no" > gnocchi_backend_storage: "ceph" > cinder_backend_ceph: "yes" > cinder_backup_driver: "ceph" > cloudkitty_collector_backend: "gnocchi" > designate_ns_record: "cloud.example.com " > nova_backend_ceph: "yes" > nova_compute_virt_type: "kvm" > octavia_auto_configure: yes > octavia_amp_flavor: > name: "amphora" > is_public: no > vcpus: 1 > ram: 1024 > disk: 5 > octavia_amp_network: > name: lb-mgmt-net > provider_network_type: vlan > provider_segmentation_id: 301 > provider_physical_network: physnet1 > external: false > shared: false > subnet: > name: lb-mgmt-subnet > cidr: "10.7.0.0/16" > allocation_pool_start: "10.7.0.50" > allocation_pool_end: "10.7.255.200" > no_gateway_ip: yes > enable_dhcp: yes > mtu: 9000 > octavia_amp_network_cidr: 10.10.7.0/24 > octavia_amp_image_tag: "amphora" > octavia_certs_country: XZ > octavia_certs_state: Gotham > octavia_certs_organization: WAYNE > octavia_certs_organizational_unit: IT > horizon_keystone_multidomain: true > elasticsearch_curator_dry_run: "no" > enable_cluster_user_trust: true > > > > > > > > > > > > *ceph_rgw_hosts: - host: controllera ip: 10.10.1.5 > port: 8080 - host: controllerb ip: 10.10.1.9 > port: 8080 - host: controllerc ip: 10.10.1.13 > port: 8080ceph_rgw_swift_account_in_url: trueceph_rgw_swift_compatibility: > true* And Here is my ceph all.yml file > --- > dummy: > ceph_release_num: 16 > cluster: ceph > configure_firewall: False > *monitor_interface: bond1.10* > monitor_address_block: 10.10.1.0/24 > is_hci: true > hci_safety_factor: 0.2 > osd_memory_target: 4294967296 > *public_network: 10.10.1.0/24 <http://10.10.1.0/24>* > cluster_network: 10.10.2.0/24 > *radosgw_interface: "{{ monitor_interface }}"* > *radosgw_address_block: 10.10.1.0/24 <http://10.10.1.0/24>* > nfs_file_gw: true > nfs_obj_gw: true > ceph_docker_image: "ceph/daemon" > ceph_docker_image_tag: latest-pacific > ceph_docker_registry: 192.168.1.16:4000 > containerized_deployment: True > openstack_config: true > openstack_glance_pool: > name: "images" > pg_autoscale_mode: False > application: "rbd" > pg_num: 128 > pgp_num: 128 > target_size_ratio: 5.00 > rule_name: "SSD" > openstack_cinder_pool: > name: "volumes" > pg_autoscale_mode: False > application: "rbd" > pg_num: 1024 > pgp_num: 1024 > target_size_ratio: 42.80 > rule_name: "SSD" > openstack_nova_pool: > name: "vms" > pg_autoscale_mode: False > application: "rbd" > pg_num: 256 > pgp_num: 256 > target_size_ratio: 10.00 > rule_name: "SSD" > openstack_cinder_backup_pool: > name: "backups" > pg_autoscale_mode: False > application: "rbd" > pg_num: 512 > pgp_num: 512 > target_size_ratio: 18.00 > rule_name: "SSD" > openstack_gnocchi_pool: > name: "metrics" > pg_autoscale_mode: False > application: "rbd" > pg_num: 32 > pgp_num: 32 > target_size_ratio: 0.10 > rule_name: "SSD" > openstack_cephfs_data_pool: > name: "cephfs_data" > pg_autoscale_mode: False > application: "cephfs" > pg_num: 256 > pgp_num: 256 > target_size_ratio: 10.00 > rule_name: "SSD" > openstack_cephfs_metadata_pool: > name: "cephfs_metadata" > pg_autoscale_mode: False > application: "cephfs" > pg_num: 32 > pgp_num: 32 > target_size_ratio: 0.10 > rule_name: "SSD" > openstack_pools: > - "{{ openstack_glance_pool }}" > - "{{ openstack_cinder_pool }}" > - "{{ openstack_nova_pool }}" > - "{{ openstack_cinder_backup_pool }}" > - "{{ openstack_gnocchi_pool }}" > - "{{ openstack_cephfs_data_pool }}" > - "{{ openstack_cephfs_metadata_pool }}" > openstack_keys: > - { name: client.glance, caps: { mon: "profile rbd", osd: "profile rbd > pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ > openstack_glance_pool.name }}"}, mode: "0600" } > - { name: client.cinder, caps: { mon: "profile rbd", osd: "profile rbd > pool={{ openstack_cinder_pool.name }}, profile rbd pool={{ > openstack_nova_pool.name }}, profile rbd pool={{ > openstack_glance_pool.name }}"}, mode: "0600" } > - { name: client.cinder-backup, caps: { mon: "profile rbd", osd: > "profile rbd pool={{ openstack_cinder_backup_pool.name }}"}, mode: "0600" > } > - { name: client.gnocchi, caps: { mon: "profile rbd", osd: "profile rbd > pool={{ openstack_gnocchi_pool.name }}"}, mode: "0600", } > - { name: client.openstack, caps: { mon: "profile rbd", osd: "profile > rbd pool={{ openstack_glance_pool.name }}, profile rbd pool={{ > openstack_nova_pool.name }}, profile rbd pool={{ > openstack_cinder_pool.name }}, profile rbd pool={{ > openstack_cinder_backup_pool.name }}"}, mode: "0600" } > dashboard_enabled: True > dashboard_protocol: https > dashboard_port: 8443 > dashboard_network: "192.168.1.0/24" > dashboard_admin_user: admin > dashboard_admin_user_ro: true > dashboard_admin_password: *********** > dashboard_crt: '/home/deployer/work/site-central/chaininv.crt' > dashboard_key: '/home/deployer/work/site-central/cloud_example.com.priv' > dashboard_grafana_api_no_ssl_verify: true > dashboard_rgw_api_user_id: admin > dashboard_rgw_api_no_ssl_verify: true > dashboard_frontend_vip: '192.168.1.5' > node_exporter_container_image: " > 192.168.1.16:4000/prom/node-exporter:v0.17.0" > grafana_admin_user: admin > grafana_admin_password: ********* > grafana_crt: '/home/deployer/work/site-central/chaininv.crt' > grafana_key: '/home/deployer/work/site-central/cloud_example.com.priv' > grafana_server_fqdn: 'grafanasrv.cloud.example.com' > grafana_container_image: "192.168.1.16:4000/grafana/grafana:6.7.4" > grafana_dashboard_version: pacific > prometheus_container_image: "192.168.1.16:4000/prom/prometheus:v2.7.2" > alertmanager_container_image: "192.168.1.16:4000/prom/alertmanager:v0.16.2 > " > And my rgws.yml > --- > dummy: > copy_admin_key: true > rgw_create_pools: > "{{ rgw_zone }}.rgw.buckets.data": > pg_num: 256 > pgp_num: 256 > size: 3 > type: replicated > pg_autoscale_mode: False > rule_id: 1 > "{{ rgw_zone }}.rgw.buckets.index": > pg_num: 64 > pgp_num: 64 > size: 3 > type: replicated > pg_autoscale_mode: False > rule_id: 1 > "{{ rgw_zone }}.rgw.meta": > pg_num: 32 > pgp_num: 32 > size: 3 > type: replicated > pg_autoscale_mode: False > rule_id: 1 > "{{ rgw_zone }}.rgw.log": > pg_num: 32 > pgp_num: 32 > size: 3 > type: replicated > pg_autoscale_mode: False > rule_id: 1 > "{{ rgw_zone }}.rgw.control": > pg_num: 32 > pgp_num: 32 > size: 3 > type: replicated > pg_autoscale_mode: False > rule_id: 1 > The ceph_rgw user was created by kolla (xenavenv) [deployer@rscdeployer ~]$ openstack user list | grep ceph | 3262aa7e03ab49c8a5710dfe3b16a136 | ceph_rgw This is my ceph.conf from one of my controllers : > [root@controllera ~]# cat /etc/ceph/ceph.conf > [client.rgw.controllera.rgw0] > host = controllera > rgw_keystone_url = https://dash.cloud.example.com:5000 > ##Authentication using username, password and tenant. Preferred. > rgw_keystone_verify_ssl = false > rgw_keystone_api_version = 3 > rgw_keystone_admin_user = ceph_rgw > rgw_keystone_admin_password = cos2Jcnpnw9BhGwvPm************************** > rgw_keystone_admin_domain = Default > rgw_keystone_admin_project = service > rgw_s3_auth_use_keystone = true > rgw_keystone_accepted_roles = admin > rgw_keystone_implicit_tenants = true > rgw_swift_account_in_url = true > keyring = /var/lib/ceph/radosgw/ceph-rgw.controllera.rgw0/keyring > log file = /var/log/ceph/ceph-rgw-controllera.rgw0.log > rgw frontends = beast endpoint=10.10.1.5:8080 > rgw thread pool size = 512 > #For Debug > debug ms = 1 > debug rgw = 20 > > > # Please do not change this file directly since it is managed by Ansible > and will be overwritten > [global] > cluster network = 10.10.2.0/24 > fsid = da094354-6ade-415a-a424-************ > mon host = [v2:10.10.1.5:3300,v1:10.10.1.5:6789],[v2:10.10.1.9:3300,v1: > 10.10.1.9:6789],[v2:10.10.1.13:3300,v1:10.10.1.13:6789] > mon initial members = controllera,controllerb,controllerc > osd pool default crush rule = 1 > *public network = 10.10.1.0/24 <http://10.10.1.0/24>* > Here are my swift endpoints (xenavenv) [deployer@rscdeployer ~]$ openstack endpoint list | grep swift | 4082b4acf8bc4e4c9efc6e2d0e293724 | RegionOne | swift | object-store | True | admin | https://dashint.cloud.example.com:6780/v1/AUTH_%(project_id)s | | b13a2f53e13e4650b4efdb8184eb0211 | RegionOne | swift | object-store | True | internal | https://dashint.cloud.example.com:6780/v1/AUTH_%(project_id)s | | f85b36ff9a2b49bc9eaadf1aafdee28c | RegionOne | swift | object-store | True | public | https://dash.cloud.example.com:6780/v1/AUTH_%(project_id)s | When I connect to Horizon -> Project -> Object Store -> Containers I get theses errors : - Unable to get the swift container listing - Unable to fetch the policy details. I cannot create a new container from the WebUI, the Storage policy parameter is empty. If I try to create a new container from the CLI, I get this : (xenavenv) [deployer@rscdeployer ~]$ source cephrgw-openrc.sh (xenavenv) [deployer@rscdeployer ~]$ openstack container create demo -v START with options: container create demo -v command: container create -> openstackclient.object.v1.container.CreateContainer (auth=True) Using auth plugin: password Not Found (HTTP 404) END return value: 1 This is the log from RGW service when I execute the above command : > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 CONTENT_LENGTH=0 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 HTTP_ACCEPT=*/* > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 HTTP_ACCEPT_ENCODING=gzip, > deflate > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 HTTP_HOST= > dashint.cloud.example.com:6780 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 > HTTP_USER_AGENT=openstacksdk/0.59.0 keystoneauth1/4.4.0 > python-requests/2.26.0 CPython/3.8.8 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 HTTP_VERSION=1.1 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 > HTTP_X_AUTH_TOKEN=gAAAAABiXUrjDFNzXx03mt1lbpUiCqNND1HACspSfg6h_TMxKYND5Hb9BO3FxH0a7CYoBXgRJywGszlK8cl-7zbUNRjHmxgIzmyh-CrWyGv793ZLOAmT_XShcrIKThjIIH3gTxYoX1TXwOKbsvMuZnI5EKKsol2y2MhcqPLeLGc28_AwoOr_b80 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 > HTTP_X_FORWARDED_FOR=10.10.3.16 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 HTTP_X_FORWARDED_PROTO=https > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 REMOTE_ADDR=10.10.1.13 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 REQUEST_METHOD=PUT > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 > REQUEST_URI=/v1/AUTH_971efa4cb18f42f7a405342072c39c9d/demo > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 > SCRIPT_URI=/v1/AUTH_971efa4cb18f42f7a405342072c39c9d/demo > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 SERVER_PORT=8080 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 1 ====== starting new request > req=0x7f23221aa620 ===== > 2022-04-18T12:26:27.995+0100 7f22e07a9700 2 req 728157015944164764 > 0.000000000s initializing for trans_id = > tx000000a1aeef2b40f759c-00625d4ae3-4b389-default > 2022-04-18T12:26:27.995+0100 7f22e07a9700 10 req 728157015944164764 > 0.000000000s rgw api priority: s3=8 s3website=7 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 10 req 728157015944164764 > 0.000000000s host=dashint.cloud.example.com > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 req 728157015944164764 > 0.000000000s subdomain= domain= in_hosted_domain=0 > in_hosted_domain_s3website=0 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 req 728157015944164764 > 0.000000000s final domain/bucket subdomain= domain= in_hosted_domain=0 > in_hosted_domain_s3website=0 s->info.domain= > s->info.request_uri=/v1/AUTH_971efa4cb18f42f7a405342072c39c9d/demo > 2022-04-18T12:26:27.995+0100 7f22e07a9700 20 req 728157015944164764 > 0.000000000s get_handler handler=22RGWHandler_REST_Obj_S3 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 10 req 728157015944164764 > 0.000000000s handler=22RGWHandler_REST_Obj_S3 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 2 req 728157015944164764 > 0.000000000s getting op 1 > 2022-04-18T12:26:27.995+0100 7f22e07a9700 1 -- 10.10.1.13:0/2715436964 > --> [v2:10.10.1.7:6801/4815,v1:10.10.1.7:6803/4815] -- > osd_op(unknown.0.0:1516 12.3 12:c14cb721:::script.prerequest.:head [call > version.read in=11b,getxattrs,stat] snapc 0=[] > ondisk+read+known_if_redirected e1182) v8 -- 0x56055eb2c400 con > 0x56055e53b000 > 2022-04-18T12:26:27.996+0100 7f230d002700 1 -- 10.10.1.13:0/2715436964 > <== osd.23 v2:10.10.1.7:6801/4815 22 ==== osd_op_reply(1516 > script.prerequest. [call,getxattrs,stat] v0'0 uv0 ondisk = -2 ((2) No such > file or directory)) v8 ==== 246+0+0 (crc 0 0 0) 0x56055ea18b40 con > 0x56055e53b000 > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 10 req 728157015944164764 > 0.001000002s s3:put_obj scheduling with throttler client=2 cost=1 > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 10 req 728157015944164764 > 0.001000002s s3:put_obj op=21RGWPutObj_ObjStore_S3 > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 2 req 728157015944164764 > 0.001000002s s3:put_obj verifying requester > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 20 req 728157015944164764 > 0.001000002s s3:put_obj rgw::auth::StrategyRegistry::s3_main_strategy_t: > trying rgw::auth::s3::AWSAuthStrategy > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 20 req 728157015944164764 > 0.001000002s s3:put_obj rgw::auth::s3::AWSAuthStrategy: trying > rgw::auth::s3::S3AnonymousEngine > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 20 req 728157015944164764 > 0.001000002s s3:put_obj rgw::auth::s3::S3AnonymousEngine granted access > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 20 req 728157015944164764 > 0.001000002s s3:put_obj rgw::auth::s3::AWSAuthStrategy granted access > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 2 req 728157015944164764 > 0.001000002s s3:put_obj normalizing buckets and tenants > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 10 req 728157015944164764 > 0.001000002s s->object=AUTH_971efa4cb18f42f7a405342072c39c9d/demo > s->bucket=v1 > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 2 req 728157015944164764 > 0.001000002s s3:put_obj init permissions > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 20 req 728157015944164764 > 0.001000002s s3:put_obj get_system_obj_state: rctx=0x7f23221a9000 > obj=default.rgw.meta:root:v1 state=0x56055ea8c520 s->prefetch_data=0 > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 10 req 728157015944164764 > 0.001000002s s3:put_obj cache get: name=default.rgw.meta+root+v1 : miss > 2022-04-18T12:26:27.996+0100 7f22ddfa4700 1 -- 10.10.1.13:0/2715436964 > --> [v2:10.10.1.3:6802/4933,v1:10.10.1.3:6806/4933] -- > osd_op(unknown.0.0:1517 11.b 11:d05f7b30:root::v1:head [call version.read > in=11b,getxattrs,stat] snapc 0=[] ondisk+read+known_if_redirected e1182) v8 > -- 0x56055eb2cc00 con 0x56055e585000 > 2022-04-18T12:26:27.997+0100 7f230c801700 1 -- 10.10.1.13:0/2715436964 > <== osd.3 v2:10.10.1.3:6802/4933 9 ==== osd_op_reply(1517 v1 > [call,getxattrs,stat] v0'0 uv0 ondisk = -2 ((2) No such file or directory)) > v8 ==== 230+0+0 (crc 0 0 0) 0x56055e39db00 con 0x56055e585000 > 2022-04-18T12:26:27.997+0100 7f22dd7a3700 10 req 728157015944164764 > 0.002000004s s3:put_obj cache put: name=default.rgw.meta+root+v1 > info.flags=0x0 > 2022-04-18T12:26:27.997+0100 7f22dd7a3700 10 req 728157015944164764 > 0.002000004s s3:put_obj adding default.rgw.meta+root+v1 to cache LRU end > 2022-04-18T12:26:27.997+0100 7f22dd7a3700 10 req 728157015944164764 > 0.002000004s s3:put_obj init_permissions on <NULL> failed, ret=-2002 > 2022-04-18T12:26:27.997+0100 7f22dd7a3700 1 req 728157015944164764 > 0.002000004s op->ERRORHANDLER: err_no=-2002 new_err_no=-2002 > 2022-04-18T12:26:27.997+0100 7f22dbfa0700 1 -- 10.10.1.13:0/2715436964 > --> [v2:10.10.1.8:6804/4817,v1:10.10.1.8:6805/4817] -- > osd_op(unknown.0.0:1518 12.1f 12:fb11263f:::script.postrequest.:head [call > version.read in=11b,getxattrs,stat] snapc 0=[] > ondisk+read+known_if_redirected e1182) v8 -- 0x56055eb2d000 con > 0x56055e94c800 > 2022-04-18T12:26:27.998+0100 7f230d002700 1 -- 10.10.1.13:0/2715436964 > <== osd.9 v2:10.10.1.8:6804/4817 10 ==== osd_op_reply(1518 > script.postrequest. [call,getxattrs,stat] v0'0 uv0 ondisk = -2 ((2) No such > file or directory)) v8 ==== 247+0+0 (crc 0 0 0) 0x56055ea18b40 con > 0x56055e94c800 > 2022-04-18T12:26:27.998+0100 7f22d8f9a700 2 req 728157015944164764 > 0.003000006s s3:put_obj op status=0 > 2022-04-18T12:26:27.998+0100 7f22d8f9a700 2 req 728157015944164764 > 0.003000006s s3:put_obj http status=404 > 2022-04-18T12:26:27.998+0100 7f22d8f9a700 1 ====== req done > req=0x7f23221aa620 op status=0 http_status=404 latency=0.003000006s ====== > 2022-04-18T12:26:27.998+0100 7f22d8f9a700 1 beast: 0x7f23221aa620: > 10.10.1.13 - anonymous [18/Apr/2022:12:26:27.995 +0100] "PUT > /v1/AUTH_971efa4cb18f42f7a405342072c39c9d/demo HTTP/1.1" 404 214 - > "openstacksdk/0.59.0 keystoneauth1/4.4.0 python-requests/2.26.0 > CPython/3.8.8" - latency=0.003000006s > Could you help please. Regards.

2 4

[Kolla][Kolla-Ansible] Unable to Deploy tacker victoria in centos 8 Stream
by Richa Gupta 19 Apr '22

19 Apr '22

We tried installing the tacker victoria release using Kolla Ansible all-in-one deployment on centos stream 8, by using the following links: https://docs.openstack.org/tacker/victoria/install/kolla.html and running prerequisites mentioned in the link below: https://docs.openstack.org/kolla-ansible/latest/user/quickstart.html#instal… (We changed ussri to victoria at all necessary places. The globals.yml exactly matches with the one given in the OpenStack link) while running deployment we encounter the following error: RUNNING HANDLER [Waiting for rabbitmq to start] ********************************************************************************************************** fatal: [localhost]: FAILED! => {"changed": true, "cmd": ["docker", "exec", "rabbitmq", "rabbitmqctl", "wait", "/var/lib/rabbitmq/mnesia/rabbitmq.pid"], "delta": "0:00:10.704454", "end": "2022-04-19 11:43:12.259809", "msg": "non-zero return code", "rc": 75, "start": "2022-04-19 11:43:01.555355", "stderr": "Error: operation wait on node rabbit@tacker-victoria timed out. Timeout value used: 10000", "stderr_lines": ["Error: operation wait on node rabbit@tacker-victoria timed out. Timeout value used: 10000"], "stdout": "Waiting for pid file '/var/lib/rabbitmq/mnesia/rabbitmq.pid' to appear", "stdout_lines": ["Waiting for pid file '/var/lib/rabbitmq/mnesia/rabbitmq.pid' to appear"]} RUNNING HANDLER [Restart remaining rabbitmq containers] ************************************************************************************************** NO MORE HOSTS LEFT *************************************************************************************************************************************** PLAY RECAP *********************************************************************************************************************************************** localhost : ok=77 changed=43 unreachable=0 failed=1 skipped=19 rescued=0 ignored=1 After this we run deploy again and encounter the following error: TASK [service-rabbitmq : nova | Ensure RabbitMQ users exist] *************************************************************************************************************************** FAILED - RETRYING: nova | Ensure RabbitMQ users exist (5 retries left). FAILED - RETRYING: nova | Ensure RabbitMQ users exist (4 retries left). FAILED - RETRYING: nova | Ensure RabbitMQ users exist (3 retries left). FAILED - RETRYING: nova | Ensure RabbitMQ users exist (2 retries left). FAILED - RETRYING: nova | Ensure RabbitMQ users exist (1 retries left). failed: [localhost -> localhost] (item=None) => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} fatal: [localhost -> {{ service_rabbitmq_delegate_host }}]: FAILED! => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} PLAY RECAP ***************************************************************************************************************************************************************************** localhost : ok=116 changed=42 unreachable=0 failed=1 skipped=40 rescued=0 ignored=0 Command failed ansible-playbook -i /usr/local/share/kolla-ansible/ansible/inventory/all-in-one -e @/etc/kolla/globals.yml -e @/etc/kolla/passwords.yml -e CONFIG_DIR=/etc/kolla -e kolla_action=deploy /usr/local/share/kolla-ansible/ansible/site.yml [centos@tacker-victoria ~]$

1 0

[murano][octavia][sahara][zaqar][zun][oslo] Pending removal of 'oslo_db.sqlalchemy.test_base'
by Stephen Finucane 19 Apr '22

19 Apr '22

o/ This is a heads up to the maintainers of the aforementioned projects that the oslo team are planning to remove the 'oslo_db.sqlalchemy.test_base' module this cycle. This module has been deprecated since 2015 and we want to get rid of it to reduce load on the overburdened oslo maintainers. I have already fixed the issue in a couple of projects. These can be used as blueprints for fixing the remaining affected projects: * masakari (https://review.opendev.org/c/openstack/masakari/+/802761) * glance (https://review.opendev.org/c/openstack/glance/+/802762) * manila (https://review.opendev.org/c/openstack/manila/+/802763) I would love to fix the remaining projects but my limited time is currently focused elsewhere. The oslo.db change is available at [1]. We'd like this to be merged in the next month but we can push that out to later in the cycle if teams need more time. Just shout. Please let us know if you have any concerns or if the above changes are not sufficient as a guide for how to address these issues. Cheers, Stephen [1] https://review.opendev.org/c/openstack/oslo.db/+/798136

4 4

[neutron] CI meeting agenda for 19.04
by Slawek Kaplonski 19 Apr '22

19 Apr '22

Hi, Just quick reminder that today at 15:00 UTC we will have Neutron CI weekly meeting. It will be the video meeting this week: *https://meetpad.opendev.org/neutron-ci-meetings[1]* Agenda for the meeting is available on https://etherpad.opendev.org/p/neutron-ci-meetings#L10[2] -- Slawek Kaplonski Principal Software Engineer Red Hat -------- [1] https://meetpad.opendev.org/neutron-ci-meetings [2] https://etherpad.opendev.org/p/neutron-ci-meetings#L10

1 0

[neutron][nova] port binding fails for existing networks
by Eugen Block 19 Apr '22

19 Apr '22

Hi *, I have a kind of strange case which I'm trying to solve for hours, I could use some fresh ideas. It's a HA cloud (Victoria) deployed by Salt and the 2 control nodes are managed by pacemaker, the third controller will join soon. There are around 16 compute nodes at the moment. This two-node-control plane works well, except if there are unplanned outages. Since the last outage of one control node we struggle to revive neutron (I believe neutron is the issue here). I'll try to focus on the main issue here, let me know if more details are required. After the failed node was back online all openstack agents show as "up" (openstack compute service list, openstack network agent list). Running VMs don't seem to be impacted (as far as I can tell). But we can't create new instances in existing networks, and since we use Octavia we also can't (re)build any LBs at the moment. When I create a new test network the instance spawns successfully and is active within a few seconds. For existing networks we get the famous "port binding failed" from nova-compute.log. But I see the port being created, it just can't be attached to the instance. One more strange thing: I don't see any entries in the nova-scheduler.log or nova-conductor.log for the successfully built instance, except for the recently mentioned etcd3gw message from nova-conductor, but this didn't impact the instance creation yet. We have investigated this for hours, we have rebooted both control nodes multiple times in order to kill any remaining processes. The galera DB seems fine, rabbitmq also behaves normally (I think), we tried multiple times to put one node in standby to only have one node to look at which also didn't help. So basically we restarted everything multiple times on the control nodes and also nova-compute and openvswitch-agent on all compute nodes, the issue is still not resolved. Does anyone have further ideas to resolve this? I'd be happy to provide more details, just let me know what you need. Happy Easter! Eugen

3 5

OPS Meetup Meeting tomorrow
by Amy Marrich 18 Apr '22

18 Apr '22

Just a reminder that the OPS Meetup team will meet tomorrow morning at 13:00 UTC in the #openstack-operators room on OFTC. See you there!

1 0

[TripleO] Final TripleO repos release for stable/victoria - any requests?
by Marios Andreou 18 Apr '22

18 Apr '22

Hello The stable/victoria branch for all tripleo repos will transition to Extended Maintenance in 2 weeks [1]. To prevent delays I have prepared a final victoria release at [2]. That [2] will be updated after its depends-on merges (puppet metadata bump) to pickup the latest victoria commits at that point. If there are any patches you want included then please speak up and I'll wait for and include those commits before updating releases/+/836921 [2]. This is the last ever release to be made from stable/victoria. Once it goes to Extended Maintenance we can no longer release. I'll hold it for a few days.. Unless I hear otherwise I will update [2] on Monday and try to get it merged next week. thanks, marios [1] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028013.ht… [2] https://review.opendev.org/c/openstack/releases/+/836921

2 3

[Neutron] Bug deputy report April 11 - April 18
by Jakub Libosvar 18 Apr '22

18 Apr '22

Hi all, I was the bug deputy for the previous week. There is one critical bug from Slawek with proposed revert. Here is the report: Critical -------- - Test tempest.scenario.test_network_basic_ops.TestNetworkBasicOps.test_update_instance_port_admin_state is failing constantly since 7.04.2022 https://bugs.launchpad.net/neutron/+bug/1968896 Revert proposed: https://review.opendev.org/c/openstack/neutron/+/837685 Medium ------ - neutron-dhcp-agent memory leak on network sync failure https://bugs.launchpad.net/neutron/+bug/1969270 Needs an assignee - [L3-DVR]l3-agent arp table will not update https://bugs.launchpad.net/neutron/+bug/1968860 Needs an assignee - network DHCP agent ports status is DOWN in multi network creation simultaneously https://bugs.launchpad.net/neutron/+bug/1968859 Needs an assignee - Importing neutron.common.config module registers config options https://bugs.launchpad.net/neutron/+bug/1968606 Proposed fix: https://review.opendev.org/c/openstack/neutron/+/837392 Incomplete ---------- - unable to attach an interface to an external network https://bugs.launchpad.net/neutron/+bug/1968893 Looks like configuration issue, more logs are needed - too many l3 dvr agents got notifications after a server got deleted https://bugs.launchpad.net/neutron/+bug/1968837 I'm not sure I understand what the issue is Invalid ------- - ovn-controller don't update new flows https://bugs.launchpad.net/neutron/+bug/1969354 It looks like misconfigured environment, provided some tips

1 0

[ironic] Skipping today's upstream meeting
by Iury Gregory 18 Apr '22

18 Apr '22

Hi Ironicers, We will skip the weekly meeting this week, since we have Easter Holidays and other holidays in some countries =) ) -- *Att[]'sIury Gregory Melo Ferreira * *MSc in Computer Science at UFCG* *Part of the ironic-core and puppet-manager-core team in OpenStack* *Senior Software Engineer at Red Hat Brazil* *Social*: https://www.linkedin.com/in/iurygregory *E-mail: iurygregory(a)gmail.com <iurygregory(a)gmail.com>*

1 0

[neutron] Mysql FK Errors
by Ammad Syed 18 Apr '22

18 Apr '22

Hi, I am using neutron 19.1 with OVN backend. I am receiving below mentioned errors in my percona xtradb cluster logs for neutron database. 2022-04-04T15:39:17.342175+05:00 187579 [ERROR] [MY-011825] [InnoDB] WSREP: referenced FK check fail: Lock wait index `PRIMARY` table `neutron_ml2`.`portsecuritybindings` 2022-04-05T14:18:19.801183+05:00 275503 [ERROR] [MY-011825] [InnoDB] WSREP: referenced FK check fail: Lock wait index `PRIMARY` table `neutron_ml2`.`ml2_port_binding_levels` Can you guys advice about these errors. Is there anything to worry about? or should I just ignore them ? Ammad

1 0

[Trove][Xena] Error building Trove image
by wodel youchi 17 Apr '22

17 Apr '22

Hi, When trying to build Trove I am getting this error message : 2022-04-10 08:55:25.497 | *+ install_deb_packages install iscsi-initiator-utils* 2022-04-10 08:55:25.497 | + DEBIAN_FRONTEND=noninteractive 2022-04-10 08:55:25.497 | + http_proxy= 2022-04-10 08:55:25.497 | + https_proxy= 2022-04-10 08:55:25.497 | + no_proxy= 2022-04-10 08:55:25.497 | + apt-get --option Dpkg::Options::=--force-confold --option Dpkg::Options::=--force-confdef --assume-yes install iscsi-initiator-utils 2022-04-10 08:55:25.541 | Reading package lists... 2022-04-10 08:55:25.788 | Building dependency tree... 2022-04-10 08:55:25.788 | Reading state information... 2022-04-10 08:55:25.825 | *E: Unable to locate package iscsi-initiator-utils* 2022-04-10 08:55:25.838 | ++ diskimage_builder/lib/img-functions:run_in_target:59 : check_break after-error run_in_target bash 2022-04-10 08:55:25.843 | ++ diskimage_builder/lib/common-functions:check_break:143 : echo '' 2022-04-10 08:55:25.844 | ++ diskimage_builder/lib/common-functions:check_break:143 : egrep -e '(,|^)after-error(,|$)' -q 2022-04-10 08:55:25.851 | + diskimage_builder/lib/img-functions:run_in_target:1 : trap_cleanup 2022-04-10 08:55:25.855 | + diskimage_builder/lib/img-functions:trap_cleanup:36 I am not an Ubuntu person but I think the package's name is open-iscsi. This is the command I used to build the image : ./trovestack build-image ubuntu bionic true ubuntu /home/stack/trove-xena-guest-ubuntu-bionic-dev.qcow2 My OS is a Centos 8 Stream. you can find the whole log of the operation attached. Thanks in advance. Regards.

2 1

Re: [Trove][Xena] Error building Trove image
by Hirotaka Wakabayashi 16 Apr '22

16 Apr '22

Hi Wodel, I think you need to fix DIB element files to build a guest image as CentOS Stream. Officially supported operating system in Trove is currently Ubuntu[1]. I am preparing Installation instructions Fedora/CentOS Stream users[2] but that is not completed. You may not really need to build a guest image as CentOS Stream if you are a mysql or postgresql user, because Trove supports Docker Since Victoria. This means database service can runs as docker container inside the Trove instance. You can define the datastore image by using the "docker_image" config option[4]. --- [1]: https://docs.openstack.org/trove/latest/admin/building_guest_images.html [2]: https://storyboard.openstack.org/#!/story/2009918 [3]: https://opendev.org/openstack/trove/src/branch/master/integration/scripts/f… [4]: https://docs.openstack.org/trove/latest/admin/run_trove_in_production.html#… Regards,Hirotaka On Wednesday, April 13, 2022, 10:04:53 PM GMT+9, <openstack-discuss-request(a)lists.openstack.org> wrote: Send openstack-discuss mailing list submissions to openstack-discuss(a)lists.openstack.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss or, via email, send a message with subject or body 'help' to openstack-discuss-request(a)lists.openstack.org You can reach the person managing the list at openstack-discuss-owner(a)lists.openstack.org When replying, please edit your Subject line so it is more specific than "Re: Contents of openstack-discuss digest..." Today's Topics: 1. [Trove][Xena] Error building Trove image (wodel youchi) ---------------------------------------------------------------------- Message: 1 Date: Wed, 13 Apr 2022 00:16:59 +0100 From: wodel youchi <wodel.youchi(a)gmail.com> To: OpenStack Discuss <openstack-discuss(a)lists.openstack.org> Subject: [Trove][Xena] Error building Trove image Message-ID: <CAJV_UBCZVOKmjvwdDJW0w17g39L8MVHuZNOQJ7yH2DZNFnqZbA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi, When trying to build Trove I am getting this error message : 2022-04-10 08:55:25.497 | *+ install_deb_packages install iscsi-initiator-utils* 2022-04-10 08:55:25.497 | + DEBIAN_FRONTEND=noninteractive 2022-04-10 08:55:25.497 | + http_proxy= 2022-04-10 08:55:25.497 | + https_proxy= 2022-04-10 08:55:25.497 | + no_proxy= 2022-04-10 08:55:25.497 | + apt-get --option Dpkg::Options::=--force-confold --option Dpkg::Options::=--force-confdef --assume-yes install iscsi-initiator-utils 2022-04-10 08:55:25.541 | Reading package lists... 2022-04-10 08:55:25.788 | Building dependency tree... 2022-04-10 08:55:25.788 | Reading state information... 2022-04-10 08:55:25.825 | *E: Unable to locate package iscsi-initiator-utils* 2022-04-10 08:55:25.838 | ++ diskimage_builder/lib/img-functions:run_in_target:59 : check_break after-error run_in_target bash 2022-04-10 08:55:25.843 | ++ diskimage_builder/lib/common-functions:check_break:143 : echo '' 2022-04-10 08:55:25.844 | ++ diskimage_builder/lib/common-functions:check_break:143 : egrep -e '(,|^)after-error(,|$)' -q 2022-04-10 08:55:25.851 | + diskimage_builder/lib/img-functions:run_in_target:1 : trap_cleanup 2022-04-10 08:55:25.855 | + diskimage_builder/lib/img-functions:trap_cleanup:36 I am not an Ubuntu person but I think the package's name is open-iscsi. This is the command I used to build the image : ./trovestack build-image ubuntu bionic true ubuntu /home/stack/trove-xena-guest-ubuntu-bionic-dev.qcow2 My OS is a Centos 8 Stream. you can find the whole log of the operation attached. Thanks in advance. Regards.

1 0

[Kolla-ansible][Glance] Glance HA deployment with shared file backend
by Rodrigo Lima 16 Apr '22

16 Apr '22

Hi Guys, hope all is well! According with the kolla-ansible documentation, " By default when using file backend only one glance-api container can be running." So my questions is quite simple: Can I deploy multiple glance_api containers in HA mode (like if I used ceph or swift backend) if I use a shared filesystem (eg. NFS) in all glance nodes? If I can do so, what I need to change in deployment files/scripts/yaml?

2 1

[all][tc] What's happening in Technical Committee: summary April 15th, 21: Reading: 10 min
by Ghanshyam Mann 15 Apr '22

15 Apr '22

Hello Everyone, Here is this week's summary of the Technical Committee activities. 1. TC Meetings: ============ * We cancelled this week's meeting. * Next TC weekly meeting will be on April 21st Thursday 15:00 UTC, feel free to add the topic on the agenda[1] by April 20th. 2. What we completed this week: ========================= * Added goal readiness checklist[2] * Retired openstack-health[3] * Retired tempest-lib[4] * Add Ganesha based Ceph NFS Charm[5] * PTG summary sent to ML[6] 3. Activities In progress: ================== TC Tracker for Zed cycle ------------------------------ * With the Zed cycle kickoff[7], I have started the Zed cycle TC tracker by listing all the items we discussed in PTG but we will add more during the cycle also if something important comes up[8] Open Reviews ----------------- * Seven open reviews for ongoing activities[9]. Drop the lower constraints maintenance ------------------------------------------------ This has been going on for many months, if I remember correctly it was first brought up in Dec 2021. During those discussions, we figured out that maintaining and testing the lower constraints has many challenges. TC discussed all those challenges in Zed PTG and agreed to drop lower-constraints.txt file and its testing but keep them in requirements.txt with our best effort. I proposed the TC resolution on this[10], feel free to feedback there if there is any strong objection in this direction. Also sent it on ML[11] Consistent and Secure Default RBAC -------------------------------------------- I summarized the RBAC PTG discussion[12], we did not finish the discussion over the open question and decided to continue it in RBAC meetings later. I will schedule the next meeting soon. If you have any other questions than the current one, please add them to the etherpad[13] Removing the TC tag framework ---------------------------------- In TC tag framework, every TC member used to assign a few projects to check their health, needs from TC etc. It was meant to improve the interaction between TC and PTLs and contact points for any projects when TC needs it. But it did not go that way and even many of us do not know if that still exists or not. With TC weekly meetings and PTG interaction sessions, we anyways are more contacted with leaders and discussed it in PTG and agreed to remove this framework. I have proposed the removal[14] 2021 User Survey TC Question Analysis ----------------------------------------------- Jay has summarized the TC's user survey in PTG and it is up in gerrit for review[15]. Feel free to check and provide feedback. Zed cycle Leaderless projects ---------------------------------- Zaqar PTL assigned is merged[16], with that only Adjutant project is leaderless/maintainer-less. We will check Adjutant's situation again on ML and hope Braden will be ready with their company side permission[17]. Fixing Zuul config error ---------------------------- Requesting projects with zuul config error to look into those and fix them which should not take much time[18]. Project updates ------------------- * Add the cinder-three-par charm to Openstack charms[19] 4. How to contact the TC: ==================== If you would like to discuss or give feedback to TC, you can reach out to us in multiple ways: 1. Email: you can send the email with tag [tc] on openstack-discuss ML[20]. 2. Weekly meeting: The Technical Committee conduct a weekly meeting every Thursday 15 UTC [21] 3. Ping us using 'tc-members' nickname on #openstack-tc IRC channel. [1] https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting [2] https://review.opendev.org/c/openstack/governance/+/835102 [3] https://review.opendev.org/c/openstack/governance/+/836706 [4] https://review.opendev.org/c/openstack/governance/+/836704 [5] https://review.opendev.org/c/openstack/governance/+/835429 [6] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028104.ht… [7] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028206.ht… [8] https://etherpad.opendev.org/p/tc-zed-tracker [9] https://review.opendev.org/q/projects:openstack/governance+status:open [10] https://review.opendev.org/c/openstack/governance/+/838004 [11] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028199.ht… [12] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028103.ht… [13] https://etherpad.opendev.org/p/rbac-zed-ptg [14] https://review.opendev.org/c/openstack/governance/+/837891 [15] https://review.opendev.org/c/openstack/governance/+/836888 [16] https://review.opendev.org/c/openstack/governance/+/831123 [17] http://lists.openstack.org/pipermail/openstack-discuss/2022-March/027626.ht… [18] https://etherpad.opendev.org/p/zuul-config-error-openstack [19] https://review.opendev.org/c/openstack/governance/+/837781 [20] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss [21] http://eavesdrop.openstack.org/#Technical_Committee_Meeting -gmann

1 0

[all][tc] Technical Committee Zed cycle Kick-Off
by Ghanshyam Mann 15 Apr '22

15 Apr '22

Hello Everyone, In PTG, we decided to continue the TC per-cycle-tracker which help us to finish the things within the timeframe of one cycle. During PTG week (TC+leader interaction and TC-related sessions), we had a lot of productive discussions[1] and collected many working items for TC. The Technical Committee's main goal is to drive more technical work to solve the OpenStack existing technical challenges. This is the main feedback from the community to TC working and I am happy to have that feedback, as well as TC, started working on it in a more productive way. Of course, we will continue doing the governance part too which does not take much bandwidth of TC members and we will also try to minimize such process-related tasks as per the current situation and needs of the community. In the Zed cycle also, we will continue to focus on the Technical works. I have created the Zed cycle TC tracker and we will be targeting 7 Technical items + 4 process/governance-focused items. Also, we will be open to taking more items if anything important comes up in between the cycle. - https://etherpad.opendev.org/p/tc-zed-tracker With that, let's continue to work together and have another successful cycle. Feel free to reach out to TC at any time (does not need to wait for the weekly meeting) for your queries or help. Also, you can find all the cycle wise trackers on this wiki page[2] [1] http://lists.openstack.org/pipermail/openstack-discuss/2022-April/028104.ht… [2] https://wiki.openstack.org/wiki/Technical_Committee_Tracker -gmann

1 0

[TripleO][Ceph] Zed PTG Summary
by Francesco Pantano 15 Apr '22

15 Apr '22

Hello everyone, Here are a few highlights on the TripleO Ceph integration status and the plans for the next cycle. *1. Deployed ceph as a separate step* TripleO now provides a different stage (with a new cli set of commands) to bootstrap the Ceph cluster before reaching the overcloud deployment phase. This is the new default approach since Wallaby, and the short term plan is to work on the upstream CI consolidation to make sure we run this stage on the existing TripleO standalone scenarios, extending the coverage to both phases (before the overcloud deployment, when the Ceph cluster is created, and during the overcloud deployment, when the cluster is finalized according to the enabled services). It's worth mentioning that great progress in this direction has been made, and the collaboration with the tripleo-ci is one of the key points here, as they're helping on the automation aspect to test upstream pending bits with daily jobs. The next step will be working together on the automation of the promotion mechanism, which is supposed to make this process less error-prone. *2. Decouple Ceph Upgrades* Nautilus to Pacific is still managed by ceph-ansible but the stage of upgrading the cluster has been moved before the overcloud upgrade, resulting in a different maintenance window. Once the cluster is moved to Pacific, cephadm is enabled, and from this moment onwards, the upgrade process, as well as minor updates, will be managed by cephadm and can be seen as a day2 operation. The operator can now perform these kinds of tasks without any interaction with TripleO, which is still used to pull the new containers (unless another registry reachable from the overcloud is used), but the scope has been limited. *3. Ganesha transitioning to Ceph orchestrator and Ingress migration* This has been the main topic for this first ptg session: the feature it's tracked by two already approved upstream specs and the goal is to support a Ganesha service managed by cephadm instead of a tripleo-managed one. The TripleO conversation impacted many areas: *a.* the networkv2 flow has been improved and it's now possible to reserve more than 1 VIP per network, but it applies only to the ceph services; *b.* a new TripleO resource, the CephIngress daemon, has been added, and it's a key component (provided by Ceph) that is supposed to provide HA for the ceph-nfs managed daemon *c.* The tripleo cli is extended and the ceph-nfs daemon can be deployed during the bootstrap of the ceph cluster *d.* This feature depends on the manila driver development [1], which represents an effort to implement a driver that can interact with the Ceph orch cli (and the layer it provides for nfs) instead of using dbus. Further information about this conversation can be found here [1]. Part of this conversation (and really good input here actually) was about the migration plan for already existing environments where operators would like to move from a TripleO managed Ganesha to a highly available ceph-nfs managed by cephadm. The outcome here is: *1.* It's possible to move to the cephadm managed ingress daemon during the upgrade under certain constraints, but we should provide tools to finalize the migration because there's an impact not only on the server-side (and the manila service itself) but also on the clients where the shares are mounted; *2.* We might want to have options to keep the PCS managed VIP for Ganesha and avoid forcing people to migrate, and this flow should be consistent at tripleo heat templates level; For those who are interested, here's the etherpad [2] and the recording of the session [3]. Thanks, Francesco [1] https://etherpad.opendev.org/p/zorilla-ptg-manila-planning [2] https://etherpad.opendev.org/p/tripleo-zed-ceph [3] https://slagle.fedorapeople.org/tripleo-zed-ptg/tripleo-zed-ptg-ceph.mp4 -- Francesco Pantano GPG KEY: F41BD75C

1 0

[tacker] Zed PTG summary
by Yasufumi Ogawa 15 Apr '22

15 Apr '22

Hi, Thank you for joining the PTG. Here is a summary of Zed PTG of Tacker. We discussed 17 proposals through three days and agreed to whole topics. The details of proposals are on the PTG's etherpad [1]. - heat-translator maintenance - Ayumu Ueha proposed himself as a core of heat-translator from Tacker team and approved by the team. - Enhance security of APIs from Tacker for validating the certificate of a destination server. - Enhancement of Tacker-horizon Dashboard for enabling some Day2 operations (might include a part of Day0/1 operations), such as manual heal, modify VNF, change the configuration of VNFM, etc, and monitoring through GUI This blueprint proposes to extend the tacker-horizon dashboard with some new interfaces and functionalities. - Support VNF using Hardware Acceleration such as GPU, FPGA, ASIC. - Remove restrictions of using Helm Chart. - v1 API Refactoring in order to maintain and extend Tacker continuously, it's important to improve the maintainability of the v1 API. - CLI support for paging query results to improve usability of the cli tool. - We still need to discuss how we provide the pagination of the results. - Support multi artifact of ansible driver. It's already to be under reviewing. https://review.opendev.org/c/openstack/tacker/+/836107 - Enhance Multi tenant policy in LCM for enhancing of the multi-tenant policy in the VNF lifecycle management. It enables a non-admin role user to instantiate VNF, and defines tenancy isolation between admin and the non-admin role users. - Enhancement of CNF operations for k8s usecases. - https://blueprints.launchpad.net/tacker/+spec/database synchronization - https://blueprints.launchpad.net/tacker/+spec/enhance-cnf-lcm - https://blueprints.launchpad.net/tacker/+spec/enhancement-container-update - https://blueprints.launchpad.net/tacker/+spec/suport-openid-k8s-vim - https://blueprints.launchpad.net/tacker/+spec/support-instantiationlevel-cnf - Support of automatic operations - https://blueprints.launchpad.net/tacker/+spec/support-auto-lcm - https://blueprints.launchpad.net/tacker/+spec/support-autoheal-queue - Improve V2 code's UT Coverage and refactoring Tacker from caishuwen. - Enhance VNF Update functionality. - https://blueprints.launchpad.net/tacker/+spec/enhance-change-package - https://blueprints.launchpad.net/tacker/+spec/individual-vnfc-management - Support HA-cluster for high availability is an important requirement to apply Tacker to commercial systems. HA cluster such as ACT-SBY or N-ACT will be supported. - Enhance vnflcm API (hirofumi-noguchi) - https://blueprints.launchpad.net/tacker/+spec/enhance-placement - https://blueprints.launchpad.net/tacker/+spec/enhance-utils-extmanagedvl - https://blueprints.launchpad.net/tacker/+spec/multi-version-vnfd - https://blueprints.launchpad.net/tacker/+spec/sol004-package-management - https://blueprints.launchpad.net/tacker/+spec/support-subscription-cli - https://blueprints.launchpad.net/tacker/+spec/vim-management-reorganization - https://blueprints.launchpad.net/tacker/+spec/abolish-default-vim - Tacker's new requirements for commercial systems (hirofumi-noguchi) - https://blueprints.launchpad.net/tacker/+spec/enhance-system-management - https://blueprints.launchpad.net/tacker/+spec/command-conflict-handling - https://blueprints.launchpad.net/tacker/+spec/system-performance-management [1] https://etherpad.opendev.org/p/tacker-zed-ptg Thanks, Yasufumi

1 0

[largescale-sig] Large Scale SIG Forum session in Berlin?
by Thierry Carrez 15 Apr '22

15 Apr '22

Hi everyone, The CFP for Forum sessions is open until Wednesday next week at: https://cfp.openstack.org/app/berlin-2022/18/presentations Should we file a session for the Large Scale SIG? Could be a generic session ("Meet the Large Scale SIG") or a more precise topic. -- Thierry Carrez (ttx)

1 0

client authentication - ? gui okey but cli fails
by lejeczek 14 Apr '22

14 Apr '22

Hi guys. An end user here thus please tailor your advice according - meaning that I have no admin access. With GUI in a web browser I do log in but with CLI I get "usual": The request you have made requires authentication. (HTTP 401) (Request-ID:.... (rc file downloaded off the GUI) What can be the issue? many thanks, L.

2 1

[all][tc] Dropping the lower constraints maintenance
by Ghanshyam Mann 14 Apr '22

14 Apr '22

Hello Everyone, In zed cycle PTG, TC discussed the lower constraints maintenance again and after considering all the existing and current issues (discussed any times in the ML thread[1]), we agreed to drop the lower-constraints.txt file, x env, and its testing on master as well as on stable branches. But for reference to anyone using them (Debian as we know), we will keep them as it is in the requirements.txt file with our best effort to keep them up to date. I have proposed the TC resolution for this, if you have any feedback please add it on Gerrit patch: - https://review.opendev.org/c/openstack/governance/+/838004 [1] http://lists.openstack.org/pipermail/openstack-discuss/2021-January/019659.… http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019390… http://lists.openstack.org/pipermail/openstack-discuss/2021-January/019672.… -gmann

1 0

[cyborg][zun][masakari][freezer-api][heat][tacker][oslo] Pending removal of 'oslo_db.sqlalchemy.enginefacade.LegacyEngineFacade'
by Stephen Finucane 14 Apr '22

14 Apr '22

o/ This is a heads up to the maintainers of the aforementioned projects that the oslo team are planning to remove the 'oslo_db.sqlalchemy.enginefacade.LegacyEngineFacade' class and related 'get_legacy_facade' helpers this cycle. The legacy engine facade pattern has been deprecated since 2015 and we want to get rid of it to reduce load on the overburdened oslo maintainers. The prefered alternative is to rely on oslo.context RequestContext-based session management. The work required to migrate can be quite significant depending on how large your DB API is but it is pretty trivial. This issue has already been fixed in a couple of projects. These can be used as blueprints for fixing the remaining affected projects: * cinder (https://review.opendev.org/q/topic:remove-legacyfacade) * nova (https://review.opendev.org/q/topic:bp%252Fnew-oslodb-enginefacade) We expect this one to take affected projects a while to resolve, so we won't remove this module until near the end of the cycle. However, this thing really needs to be removed sooner rather than later. Please let us know if you have any concerns or if the above changes are not sufficient as a guide for how to address these issues. Cheers, Stephen

1 0

[neutron] Drivers meeting - Friday 15.4.2022 - cancelled
by Lajos Katona 14 Apr '22

14 Apr '22

Hi Neutron Drivers! We have Good Friday this week, so let's cancel the drivers meeting for this week. See you at the meeting next week. Lajos Katona (lajoskatona)

1 0

[all] Devstack jobs are failing due to a git security fix
by Michael Johnson 14 Apr '22

14 Apr '22

tldr: All devstack based jobs are going to fail with newer versions of git - don't bother rechecking git has released a security fix [1] that is starting to roll out in distributions (Ubuntu focal for example) that will cause pbr to be unable to access the package metadata for packages checked out locally due to the directory ownership used in devstack. We have opened a devstack bug to track this issue: https://bugs.launchpad.net/devstack/+bug/1968798 Please see the bug for the details and example error. Michael P.S. Thanks to clarkb, fungi, and ianw for helping track down the root cause! [1] https://github.com/git/git/commit/8959555cee7ec045958f9b6dd62e541affb7e7d9

7 11

[puppet] How to disable installation of mysql::server and only create databases?
by Christian Rohmann 14 Apr '22

14 Apr '22

Hey openstack-discuss, is there any intended way of using e.g cinder::db::mysql (which is using puppet-openstacklib) to create databases, but not also run / include mysql::server which apparently happens at https://github.com/openstack/puppet-openstacklib/blob/33fb90326fadd59759d4a… ? In short I already have a running database server and only want the databases to be created. Thanks, Christian

2 2

[manila] Zed PTG summary
by Carlos Silva 14 Apr '22

14 Apr '22

Hello, zorillas and interested stackers! Thank you for attending the PTG over the last week. We had a good audience and a lot of good discussions over the proposed topics. On the official etherpad [9] you will find the notes we took during the discussions, as well as links to additional etherpads or other references. The YouTube playlist [14] holds all the recordings we had over the week. Every video corresponds to one PTG day, and their description contains the exact time frame of the discussions. *== Xena cycle retrospective ==* * We agreed and were happy with the events we have been doing in the community (collaborative review sessions, bugsquashes and some other). They help us to understand the changes that are coming in every cycle, and also get to share knowledge with the contributors. For this cycle we will define different themes for our bugsquashes. Some dates are already defined. * We agreed on the importance of the reviews from different affiliations and we decided on a few practices to involve more community members in the review process. * We brought up the enhancements we need to do in the Manila UI, and mentioned some features that we are lacking for feature parity compared to the Manila core code. * We decided to host a hackathon in the beginning of the cycle, as we had a very positive output from the last one we had. This one can focus on the functional testing of the OSC for Manila, which we are lacking. * During the Z cycle we will host the first code walkthrough for Manila. (kudos for gouthamr for the idea). The intention of this event is to help the new contributors to better understand the code and allow them to ask questions, as well as explain the structure of our repositories and go over some key parts of Manila. * We discussed the difficulties we are facing with ethercalc and we got to a point where we saw there was no alternative way to replace it. More details about the retrospective available in [1]. *== Thin Provisioning and Oversubscription improvements ==* * haixin and gouthamr brought up this topic after a few discussions on how the oversubscription issue should be solved in Manila. * Storage pools that support thin provisioning are open to an "oversubscription". * We have a ratio for allowing oversubscriptions and it also influences the way the manila scheduler filters acts. We currently have issues with that calculation. * If the backends do not report their allocated_capacity_gb, it will be inaccurate. * We can have the share manager to have a more precise calculation. * Action Items: ** haixin will write a spec with more details on how this issue is going to be addressed. *== NetApp ONTAP - migration from ZAPI to REST API ==** nahimsouza and fabioaurelio talked about the NetApp ONTAP drivers that are currently using ZAPI for communication with NetApp hardware. * NetApp is now planning to deprecate ZAPI in favor of REST. This means that if they find issues within the ZAPI calls, NetApp won't fix them anymore. * The side effect of this is that NetApp wants to migrate their driver calls from ZAPI to rest, but it will impact pretty much all operations the driver performs. * These are going to be huge changes and they intend to backport it to the oldest maintained release. * They have lots of customers using the latest versions of ONTAP but those customers do not often upgrade their OpenStack deployments. * They are looking for approaches on how to backport these changes even further. *== Add support for automatic snapshot creation and removal ==** Kiran brought up the solution proposed with a spec [2], which intends to add an automatic snapshot creation policy and automatic snapshot deletion policy for a share, considering an interval defined by an administrator. * We've asked for possible alternatives such as automating the snapshots creation via manilaclient/REST API, and also raised a few questions that would help us to enforce the need of enhancing the API. * Action Items: ** Kiran will come back with updates on the discussion points. *== Manila UI updates ==** vkmc discussed the updates for Manila UI alongside the NDSU students. * They talked about the plans we have for the UI in this cycle, as well as bringing up the feature-parity issue we currently have. * We started by filing blueprints and identifying the scope of necessary changes to get feature parity. * A taiga board [3] was created to track the progress. * We also have a few blueprints [4] for that. *== Consistent and Secure RBAC changes ==** gouthamr, gmann and vhari brought up the plans for the Z cycle, which would be continuing the plans highlighted on [5] So for Z, the idea is to: * Harden Phase 1 by re-evaluating the use of "admin" at system scope, disallowing system scope users from creating/manipulating project resources * Continue working on tempest protection tests. Liron has a patch pending reviews that starts this work [6] * Test existing tempest API/scenario tests with the new RBAC defaults and adjust any credential use or API expectations by the end of the cycle * Start working on the phase 2 per the community goal in [5] Beyond Z: * A release - Phase 3: System Reader and System Member in the default RBAC * B release: Remove deprecated policies * == OpenStack Client updates for Manila ==** maaritamm presented the progress we had so far for the OSC integration. * We are quite close to feature parity. The idea is to reach feature parity in the Z cycle and add a deprecation warning to the native client shell in python-manilaclient. * We are lacking functional tests and we came up with a plan of organizing a hackathon to be hosted close to the z-3 milestone. * This hackathon will be focused on addressing the functional tests for the client and wrapping it up. * As enforced in the past cycle, maintainers implementing new functionalities to python-manilaclient must _only_ implement them for OSC. * New features in the python-manilaclient shell will actively be discouraged. * A more detailed version is available in [7]. *== Support for highly available NFS Ganesha in the CephFS driver ==** vkmc, fmount and gouthamr presented the the Ceph orchestrator tooling that now natively supports deploying nfs-ganesha gateway servers as "ceph-nfs" cluster daemons in active/active configurations. * The Ceph community has also added support for nfs APIs to create and manipulate exports on such ceph-nfs daemons. * We discussed the changes needed to support these in Manila and how users can migrate their workloads. To provide adequate control to deployers and end users, we agreed to introduce a new protocol helper layer that will live alongside the current DBUS API helper. * When the deployment supports new NFS clusters, deployers would be able to configure "alternate" server IPs in manila which can aid a slow transition for end users to migrate to newer "preferred" servers. * We're planning to automate this transition in Triple-O while also documenting this for developers of other deployment tools. *== Devstack-plugin-ceph changes ==* * vkmc and fmount presented the changes they are implementing in order to install/deploy the ceph cluster using cephadm. There is an open change for review [8]. We are also testing the Manila CephFS job in [9]. * Native CephFS scenario tests concerning ceph-fuse are failing sporadically with timeouts while mounting. * There are few issues with testing and there is more information about them in [9]. As next steps we have: * Testing with CentOS as the devstack host and Manila's client, so we have different approaches of testing and can ensure that ubuntu testing isn't compromising the VMs and causing the possible lack of resources we are experiencing. * Splitting CI changes into different test sets focusing on different services * Turning on cephadm based deployment in the multi-node job *== Topic #Bug updates ==** vhari has shown some bug analytics and the progress we have been making over the past cycles. * We have a bunch of bugs that are old and no one has been touching them in a while (at least 2 years). * Maintainers should check launchpad and evaluate those bugs we created and/or are assigned to us and see if they are still relevant. If they are, we should keep active on them, otherwise we can just let it fall into the auto-expiry policy. * Bugsquashes have been efficient for us, we should keep doing them. ** fabioaurelio suggested a bugsquash theme that would double up as a review jam. We'd be focusing on looking at the lingering changes that are closing bugs and getting closure for them. * When we don't have the time to do the bug triaging during the Manila meeting, we will do the triaging in #openstack-manila after. * We will be hosting our bugsquashes in Z-1 and the other one between Z-2 and 3. * Action items: ** carloss will update the change with manila specific milestones to reflect our scheduled events *== Metadata API status update ==** This is an effort that started some cycles ago. We intend to allow metadata on more user facing resources in Manila [10], and do that in a generic way. * Over the Yoga cycle that was accomplished for shares, and there is a change to also permit that for share snapshots. What's next: * Getting the share snapshots changes merged over the Z cycle (M-1) * Getting the new metadata mechanism also implemented for * Share Export Locations - Target: M3 (at least API + CLI) * Share Access Rules - Target: M3 (at least API + CLI) * Share Groups - Target: M3 (at least API + CLI) *== NetApp CI Zuul v3 Migration - Challenges and lessons learned ==** Building and maintaining a stable CI system has been a huge pain point to Manila's "third party" vendor storage developers for the past few releases. * NetApp contributors have talked about their Zuul v3 setup using Software Factory. They brought up some information on their Zuul v3 CI setup and talked about some difficulties they faced during the setup. * The recording is on Manila's YouTube channel [11]. There were questions asked and raised and the discussion documented in [9]. * Action items: * Through the release cycle, we hope to offer more venues for more knowledge sharing regarding third party CI maintenance. *== FIPS compliance ==** carloss ashrod98 and ade_lee talked the attendance through the challenges and testing for FIPS * We've been through the next steps and what has been done so far in Manila ** Few changes were proposed and merged ** Our CI job is working fine with CentOS 8 but we decided we should already have it on CentOS 9 * We needed to monkey patch paramiko for some drivers ** gouthamr is concerned that if this patching paramiko change is merged, this could break older branches in the future ** A discussion in openstack-discuss will be started to ensure if this is the best approach for this issue. * At the moment, we should stick with testing using CentOS but testing with Ubuntu is under way. * Compliance steps will start on Z release * ade_lee started an audit in OpenStack services to identify non FIPS compliant libraries * Goal should be completed on AA cycle * Action Items: ** Start a discussion on patching paramiko or switching to other lib ** Submit the jobs for python-manilaclient, manila-ui and manila-tempest-plugin *== Tech Debt ==*These are a few items we would like to get moving for Manila in the next cycles. They usually involve a community goal, a request for enhancement or recommendations from the community: * Migrating from privsep to rootwrap: In progress, few changes were merged over Y cycle and we intend to have even more progress over Z. * Dropping python-keystoneclient from python-manilaclient: this is also in progress and we got a few related changes merged. We will bring this up again in the upcoming manila meetings. * Cinder/Nova online extensions support with the generic driver: this hasn't started yet and we are looking for an owner. This is more of a request for enhancement that would benefit those using the generic driver. * 26 volumes limit in the generic driver: this is something that was called out in the generic driver documentation. We agreed to try an approach where we would update the manila image and check the output for it. * Publish the container driver image on tarballs.openstack.org (or quay.io): we had few changes to the container driver in the past cycles. One functionality was implemented on it (add/update security services in share networks that are used), and for that change to be tested, the container must have OpenLDAP installed. We have a way to publish new artifacts and we could benefit from reusing that. Action items: ** carloss will work on having the new image proposed ** Bring the keystoneclient change in the upcoming manila meetings. ** Update the manila image setting hw_scsi_model=virtio-scsi and investigate if the 26 volumes limit will be solved ** Work on finding people interested to contribute in the Cinder/Nova online extensions support with the generic driver *== Manila CSI updates ==** gman0, gouthamr and vkmc talked us through some of the updates in the Manila CSI since the last PTG [12]. * We don't currently test using RWO volumes with manila-csi in cloud-provider-openstack, so we could add an "external-attacher" sidecar to ensure RWO-ness * Doing backups with manila-csi and velero/restic * Action items: ** open an issue against the CPO repo and work on testing with RWO ** open a redmine tracker to call the limitation of giving huge names to snapshots in the docs *== Community Hour ==** gouthamr brought up some details about the release cadency adjustment [13] * Also, mentioned a few implications of this and how deprecations, testing and upgrades will work * Few details in the deprecation windows and how we should be working and targeting changes in the next few cycles. * A job was recently merged in Manila to test the upgrade from tick to tick releases * Action items: ** Update the tick release job to the Xena branch [1] https://etherpad.opendev.org/p/manila-yoga-retrospective [2] https://review.opendev.org/c/openstack/manila-specs/+/823165 [3] https://review.opendev.org/c/openstack/manila-specs/+/823165 [4] https://blueprints.launchpad.net/manila-ui/+spec/api-version-features [5] https://governance.openstack.org/tc/goals/selected/consistent-and-secure-rb… [6] https://review.opendev.org/c/openstack/manila-tempest-plugin/+/805938 [7] https://etherpad.opendev.org/p/zorilla-ptg-manila-osc [8] https://review.opendev.org/c/openstack/devstack-plugin-ceph/+/826484 [9] https://etherpad.opendev.org/p/zorilla-ptg-manila [10] https://specs.openstack.org/openstack/manila-specs/specs/yoga/metadata-for-… [11] https://www.youtube.com/watch?v=Pn1ZEnlHE7A [12] https://etherpad.opendev.org/p/zorilla-ptg-manila#L413 [13] https://governance.openstack.org/tc/resolutions/20220210-release-cadence-ad… [14] https://www.youtube.com/watch?v=AIqrLdprkaE&list=PLnpzT0InFrqCjifjP1OzFgnfi…

1 0

[blazar][requirements] setuptools and python_version in upper constraints
by Pierre Riteau 14 Apr '22

14 Apr '22

Hello, In the blazar project, we have been seeing a job timeout failure in openstack-tox-py39 affecting master and stable/yoga. tox starts the "lockutils-wrapper python setup.py testr --slowest --testr-args=" process which doesn't show progress until job timeout. It started happening sometime between 2022-03-10 16:01:39 (last success on master) and 2022-03-24 16:35:15 (first timeout occurrence) [1], with no change in blazar itself and few changes in requirements. I resumed debugging today and managed to reproduce it using Ubuntu 20.04 (it doesn't happen on macOS). Here is the traceback after interrupting it if anyone wants to take a look [2]. The python process is using 100% of the CPU until interrupted. I tracked down the regression to the upper constraint on setuptools. For example, stable/yoga has: setuptools===59.6.0;python_version=='3.6' setuptools===60.9.3;python_version=='3.8' It appears this is ignored in the py39 job so the job runs with the latest setuptools. Indeed, there were some releases between March 10 and March 24. I still have to figure out what changed in setuptools to cause this behaviour. Question for requirements maintainers: is this expected behaviour, or should upper constraints also include lines for python_version=='3.9' on yoga? Thanks, Pierre Riteau (priteau) [1] https://zuul.openstack.org/builds?job_name=openstack-tox-py39&project=opens… [2] https://paste.opendev.org/show/bZO7ELmTvfMUGJPdlQ4k/

5 5

[cinder][PTG] Summary of Zed PTG
by Rajat Dhasmana 14 Apr '22

14 Apr '22

Hi All, Here is a summary of Cinder Zed PTG[1] conducted from 05th April - 8th April, 2022 from 1300 to 1700 UTC each day. Please look at the topic summary and the action items if you were the author for any topic. [1] https://wiki.openstack.org/wiki/CinderZedPTGSummary Thanks and regards Rajat Dhasmana

1 0

R: [devstack] Not able to install devstack on ubuntu 20.04
by Molka Gharbaoui 13 Apr '22

13 Apr '22

Thank you Jeremy for your prompt reply! Changing the directories ownership definetly does not work for me. Other many errors are generated. I will follow the threads to check if hopefully a better solution is suggested. ________________________________ Da: Jeremy Stanley Inviato: Mercoledì, 13 Aprile, 2022 18:53 A: openstack-discuss(a)lists.openstack.org Oggetto: Re: [devstack] Not able to install devstack on ubuntu 20.04

1 0

[devstack] Not able to install devstack on ubuntu 20.04
by Molka Gharbaoui 13 Apr '22

13 Apr '22

Hi all, I am trying to install devstack by downloading the cose through the following link: git clone https://opendev.org/openstack/devstack and then executing ./stack command which I used to use several times without any error. However, today I am getting the following error (I only changed the VM): Obtaining file:///opt/stack/keystone Preparing metadata (setup.py) ... error error: subprocess-exited-with-error × python setup.py egg_info did not run successfully. │ exit code: 1 ╰─> [16 lines of output] Error parsing Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/pbr/core.py", line 111, in pbr attrs = util.cfg_to_args(path, dist.script_args) File "/usr/local/lib/python3.8/dist-packages/pbr/util.py", line 272, in cfg_to_args pbr.hooks.setup_hook(config) File "/usr/local/lib/python3.8/dist-packages/pbr/hooks/__init__.py", line 25, in setup_hook metadata_config.run() File "/usr/local/lib/python3.8/dist-packages/pbr/hooks/base.py", line 27, in run self.hook() File "/usr/local/lib/python3.8/dist-packages/pbr/hooks/metadata.py", line 25, in hook self.config['version'] = packaging.get_version( File "/usr/local/lib/python3.8/dist-packages/pbr/packaging.py", line 872, in get_version raise Exception("Versioning for this project requires either an sdist" Exception: Versioning for this project requires either an sdist tarball, or access to an upstream git repository. It's also possible that there is a mismatch between the package name in setup.cfg and the argument given to pbr.version.VersionInfo. Project name keystone was given, but was not able to be found. error in setup command: Error parsing /opt/stack/keystone/setup.cfg: Exception: Versioning for this project requires either an sdist tarball, or access to an upstream git repository. It's also possible that there is a mismatch between the package name in setup.cfg and the argument given to pbr.version.VersionInfo. Project name keystone was given, but was not able to be found. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed × Encountered error while generating package metadata. ╰─> See above for output. note: This is an issue with the package mentioned above, not pip. hint: See above for details. +inc/python:pip_install:1 exit_trap +./stack.sh:exit_trap:523 local r=1 ++./stack.sh:exit_trap:524 jobs -p +./stack.sh:exit_trap:524 jobs= +./stack.sh:exit_trap:527 [[ -n '' ]] +./stack.sh:exit_trap:533 '[' -f '' ']' +./stack.sh:exit_trap:538 kill_spinner +./stack.sh:kill_spinner:433 '[' '!' -z '' ']' +./stack.sh:exit_trap:540 [[ 1 -ne 0 ]] +./stack.sh:exit_trap:541 echo 'Error on exit' Error on exit +./stack.sh:exit_trap:543 type -p generate-subunit +./stack.sh:exit_trap:544 generate-subunit 1649867885 63 fail +./stack.sh:exit_trap:546 [[ -z /opt/stack/logs ]] +./stack.sh:exit_trap:549 /usr/bin/python3.8 /opt/stack/devstack/tools/worlddump.py -d /opt/stack/logs World dumping... see /opt/stack/logs/worlddump-2022-04-13-163909.txt for details +./stack.sh:exit_trap:558 exit 1 Changing the owner of the directories using the following commands allows to go further in the installation process: sudo chown -R root:root /opt/stack/horizon/ sudo chown -R root:root /opt/stack/nova/ sudo chown -R root:root /opt/stack/cinder/ etc. However, then I am getting other errors related to permissions issues so I guess changing the directories ownership is not the solution. Could you please help me in resolving this. Thank you in advance!

2 1