December 2022 - openstack-discuss

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 23 Apr '25

23 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 22 Apr '25

22 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat.| Openstack tripleo wallaby version
by Swogat Pradhan 23 Dec '24

23 Dec '24

Hi, I am currently trying to deploy openstack wallaby using tripleo arch. I created the network jinja templates, ran the following commands also: #openstack overcloud network provision --stack overcloud --output networks-deployed-environment.yaml custom_network_data.yaml # openstack overcloud network vip provision --stack overcloud --output vip-deployed-environment.yaml custom_vip_data.yaml # openstack overcloud node provision --stack overcloud --overcloud-ssh-key /home/stack/sshkey/id_rsa overcloud-baremetal-deploy.yaml and used the environment files in the openstack overcloud deploy command: (undercloud) [stack@hkg2director ~]$ cat deploy.sh #!/bin/bash THT=/usr/share/openstack-tripleo-heat-templates/ CNF=/home/stack/ openstack overcloud deploy --templates $THT \ -r $CNF/templates/roles_data.yaml \ -n $CNF/workplace/custom_network_data.yaml \ -e ~/containers-prepare-parameter.yaml \ -e $CNF/templates/node-info.yaml \ -e $CNF/templates/scheduler-hints.yaml \ -e $CNF/workplace/networks-deployed-environment.yaml \ -e $CNF/workplace/vip-deployed-environment.yaml \ -e $CNF/workplace/overcloud-baremetal-deployed.yaml \ -e $CNF/workplace/custom-net-bond-with-vlans.yaml Now when i run the ./deploy.sh script i encounter an error stating: ERROR openstack [-] Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command.: tripleoclient.exceptions.InvalidConfiguration: Resource OS::TripleO::Network::Ports::ControlPlaneVipPort maps to type OS::Neutron::Port and the Neutron service is not available when using ephemeral Heat. The generated environments from 'openstack overcloud baremetal provision' and 'openstack overcloud network provision' must be included with the deployment command. 2022-04-19 13:47:16.582 735924 INFO osc_lib.shell [-] END return value: 1 Can someone tell me where the mistake is? With regards, Swogat Pradhan

4 4

Kolla Ansible on Ubuntu 20.04 - cloud-init & other network issues
by Tobias McNulty 10 Oct '24

10 Oct '24

Hi, I'm attempting to use Kolla Ansible 14.6.0 to deploy OpenStack Yoga on a small 3-node Ubuntu 20.04 cluster. The nodes have 128 GB RAM each, dual Xeon processors, and dual 10G Intel NICs. The NICs are connected to access ports on a 10G switch with separate VLANs for the local and external networks. All the playbooks run cleanly, but cloud-init is failing in the Ubuntu 20.04 and 22.04 VMs I attempt to boot. The VM images are unmodified from https://cloud-images.ubuntu.com/, and cloud-init works fine if I mount a second volume with user-data. The error is a timeout attempting to reach 169.254.169.254. This occurs both when booting a VM in an internal routed network and directly in an external network. I tried various neutron plugin agents (ovn, linuxbridge, and openvswitch both with and without firewall_driver = openvswitch <https://docs.openstack.org/kolla-ansible/latest/reference/networking/neutro…>) first with a clean install of the entire OS each time, all with the same result. Running tcpdump looking for 169.254.169.254 shows nothing. As a possible clue, the virtual NICs are unable to pass any traffic (e.g., to reach an external DHCP server) unless I completely disable port security on the interface (even if the associated security group is wide open). But disabling port security does not fix cloud-init (not to mention I don't really want to disable port security). Are there any additional requirements related to deploying OpenStack with Kolla on Ubuntu 20.04? This is a fairly vanilla configuration using the multinode inventory as a starting point. I tried to follow the Quick Start <https://docs.openstack.org/kolla-ansible/yoga/user/quickstart.html> as closely as possible; the only material difference I see is that I'm using the same 3 nodes for control + compute. I am using MAAS so it's easy to get a clean OS install on all three nodes ahead of each attempt. I plan to try again with the standard (non-HWE) kernel just in case, but otherwise I am running out of ideas. In case of any additional clues, here are my globals.yml and inventory file, along with the playbook I'm using to configure the network, images, VMs, etc., after bootstrapping the cluster: https://gist.github.com/tobiasmcnulty/7dbbdbc67abc08cbb013bf5983852ed6 Thank you in advance for any advice! Cheers, Tobias

5 9

Live migration fails
by Szabo, Istvan (Agoda) 06 Aug '24

06 Aug '24

Hi, I have couple of compute nodes where the live migration fails with existing vms. When I quickly spawn a vm and try live migration it works so I assume shouldn't be a big problem with the compute node. However I have many existing vms where it fails with a servername not found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 ERROR nova.conductor.tasks.migrate [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Unable to find record for source node servername on servername: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Failed to compute_task_migrate_server: Compute host servername could not be found.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.605 227612 WARNING nova.scheduler.utils [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] [instance: 1517a2ac-3b51-4d8d-80b3-89a5614d1ae0] Setting instance to ACTIVE state.: ComputeHostNotFound: Compute host servername could not be found. /var/log/nova/nova-conductor.log:2021-04-21 14:47:12.672 227612 ERROR oslo_messaging.rpc.server [req-f4067a26-a233-4673-8c07-9a8a290980b0 dce35e6eceea4312bb0baa0510cef363 ca7e35079f4440c78bd9870724b9638b - default default] Exception during message handling: ComputeHostNotFound: Compute host am-osfecn-4025 Tried with this command: nova live-migration --block-migrate id. Any idea? Thank you. ________________________________ This message is confidential and is for the sole use of the intended recipient(s). It may also be privileged or otherwise protected by copyright or other legal rules. If you have received it by mistake please let us know by reply email and delete it from your system. It is prohibited to copy this message or disclose its content to anyone. Any confidentiality or privilege is not waived or lost by any mistaken delivery or unauthorized disclosure of the message. All messages sent to and from Agoda may be monitored to ensure compliance with company policies, to protect the company's interests and to remove potential malware. Electronic messages may be intercepted, amended, lost or deleted, or contain viruses.

5 16

[puppet] Proposing core team clean up
by Takashi Kajinami 23 Aug '23

23 Aug '23

Hello, I went through the current core reviewers and found out that the current list includes some people no longer working in the OpenStack community. I'd like to propose removing the following persons from the core reviewer team as we haven't seen these people making any activity in the community recently. * Pradeep Kilambi - puppet-aodh, puppet-ceilometer, puppet-gnocchi, puppet-panko * Richard Megginson - puppet-keystone * Denis Egorenko - puppet-murano * Serg Melikyan - puppet-murano * Sergey Kolekonov - puppet-neutron * David Moreau Simard - puppet-openstack-integration * Yu xingchao - all modules Also, I confirmed that Wes Hayutin is no longer working for OpenStack and he agreed to retire from the core reviewer position. Thus I'll remove him as well. I'll be open for any feedback for one week to hear any thoughts/feedback about this removal. I'd like to take this moment to thank all people for their past work. We always welcome them back if they resume their work in this project. Thank you, Takashi KAJINAMI

3 4

Re: [all] [oslo.messaging] Interest in collaboration on a NATS driver
by Tobias Urdin 22 Jul '23

22 Jul '23

Hello Kai, Great to hear that you’re interested! I’m currently just testing this as a POC directly in devstack so there is real-world testing (not should it yet I think, needs more development first). Best regards Tobias > On 30 Aug 2022, at 18:32, Kai Bojens <kb(a)kbojens.de> wrote: > > Am 29.08.22 um 15:46 schrieb Tobias Urdin: > >> If anybody, or any company, out there would be interested in collaborating in a project to bring this support and maintain it feel free to >> reach out. I’m hoping somebody will bite but atleast I’ve put it out there for all of you. > > Hi, > I am very much interested to take a closer look at your work and maybe contribute to it. Although I'm working with OpenStack for my employer at the moment, I'd do this in my spare time as I'm not sure that I can convince him to add another staging system with a full OpenStack installation just for developing a RabbitMQ replacement. That's not on our agenda as we are mostly users and not developers of OpenStack. > > As I'm pretty new to the messaging topic and had just heard of NATS and your idea, I'll first would have to dive into NATS and then I would take a closer look at your code and maybe try to create some documentation or tests. So, I can't promise anything but as I said I'm very interested in your approach as I also see the massive load from RabbitMQ. > > This brings me to the most important question: Where do you run and test your code? > > Greetings, > Kai

8 30

[ironic][stable] Proposing EOL of ironic project branches older than Wallaby
by Jay Faulkner 01 Jun '23

01 Jun '23

Hi all, Ironic has a large amount of stable branches still in EM. We need to take action to ensure those branches are either retired or have CI repaired to the point of being usable. Specifically, I'm looking at these branches across all Ironic projects: - stable/queens - stable/rocky - stable/stein - stable/train - stable/ussuri - stable/victoria In lieu of any volunteers to maintain the CI, my recommendation for all the branches listed above is that they be marked EOL. If someone wants to volunteer to maintain CI for those branches, they can propose one of the below paths be taken instead: 1 - Someone volunteers to maintain these branches, and also report the status of CI of these older branches periodically on the Ironic whiteboard and in Ironic meetings. If you feel strongly that one of these branches needs to continue to be in service; volunteering in this way is how to save them. 2 - We seriously reduce CI. Basically removing all tempest tests to ensure that CI remains reliable and able to merge emergency or security fixes when needed. In some cases; this still requires CI fixes as some older inspector branches are failing *installing packages* in unit tests. I would still like, in this case, that someone volunteers to ensure the minimalist CI remains happy. My intention is to let this message serve as notice and a waiting period; and if I've not heard any response here or in Monday's Ironic meeting (in 6 days), I will begin taking action on retiring these branches. This is simply a start; other branches (including bugfix branches) are also in bad shape in CI, but getting these retired will significantly reduce the surface area of projects and branches to evaluate. I know it's painful to drop support for these branches; but we've provided good EM support for these branches for a long time and by pruning them away, we'll be able to save time to dedicate to other items. Thanks, Jay Faulkner

3 5

[Openstack] Lack of Balance solution such as Watcher.
by Nguyễn Hữu Khôi 16 Mar '23

16 Mar '23

I am building a private cloud.Everything is ok. But I cannot find a way to balance vm when It have heavy load which cause impact other vm on the compute node. I found solutions such as Watcher and Leveller. But they need to be done manually. Watcher is not good because It need cpu metric such as cpu load in Ceilometer which is removed so we cannot use it. Leveller is good, but It is obsolete. Nguyen Huu Khoi

4 7

live resize
by Parsa Aminian 15 Mar '23

15 Mar '23

hello on openstack with ceph backend is it possible to live resize instances ? I want to change flavor without any down time .

5 6