April 2021 - openstack-discuss - lists.openstack.org

RE: Re: [kolla] Train Centos7 -> Centos8 upgrade fails on 2nd controller
by Braden, Albert 01 Apr '21

01 Apr '21

I did some experimenting and it looks like stopping RMQ during the removal of the first controller is what causes the problem. After deploying the first controller, stopping the RMQ container on any controller including the new centos8 controller will cause the entire cluster to stop. This crash dump appears on the controllers that stopped in sympathy: https://paste.ubuntu.com/p/ZDgFgKtQTB/ This appears in the RMQ log: https://paste.ubuntu.com/p/5D2Qjv3H8c/ -----Original Message----- From: Braden, Albert Sent: Wednesday, March 31, 2021 8:31 AM To: openstack-discuss(a)lists.openstack.org Subject: RE: Re: [kolla] Train Centos7 -> Centos8 upgrade fails on 2nd controller Centos7: {rabbit,"RabbitMQ","3.7.24"}, "Erlang/OTP 22 [erts-10.7.2.8] [source] [64-bit] [smp:1:1] [ds:1:1:10] [async-threads:128] [hipe]\n"}, Centos8: {rabbit,"RabbitMQ","3.7.28"}, "Erlang/OTP 22 [erts-10.7.2.8] [source] [64-bit] [smp:1:1] [ds:1:1:10] [async-threads:128] [hipe]\n"}, When I deploy the first Centos8 controller, RMQ comes up with all 3 nodes active and seems to be working fine until I shut down the 2nd controller. The only hint of trouble when I replace the 1st node is this error message the first time I run the deployment: https://paste.ubuntu.com/p/h9HWdfwmrK/ and the crash dump that appears on control2: crash dump log: https://paste.ubuntu.com/p/MpZ8SwTJ2T/ First 1500 lines of the dump: https://paste.ubuntu.com/p/xkCyp2B8j8/ If I wait for a few minutes then RMQ recovers on control2 and the 2nd run of the deployment seems to work, and there is no trouble until I shut down control1. -----Original Message----- From: Mark Goddard <mark(a)stackhpc.com> Sent: Wednesday, March 31, 2021 4:14 AM To: Braden, Albert <C-Albert.Braden(a)charter.com> Cc: openstack-discuss(a)lists.openstack.org Subject: [EXTERNAL] Re: [kolla] Train Centos7 -> Centos8 upgrade fails on 2nd controller CAUTION: The e-mail below is from an external source. Please exercise caution before opening attachments, clicking links, or following guidance. On Tue, 30 Mar 2021 at 13:41, Braden, Albert <C-Albert.Braden(a)charter.com> wrote: > > I’ve created a heat stack and installed Openstack Train to test the Centos7->8 upgrade following the document here: > > > > https://docs.openstack.org/kolla-ansible/train/user/centos8.html#migrating-… > > > > I used the instructions here to successfully remove and replace control0 with a Centos8 box > > > > https://docs.openstack.org/kolla-ansible/train/user/adding-and-removing-hos… > > > > After this my RMQ admin page shows all 3 nodes up, including the new control0. The name of the cluster is rabbit(a)chrnc-void-testupgrade-control-0.dev.chtrse.com > > > > (rabbitmq)[root@chrnc-void-testupgrade-control-2 /]# rabbitmqctl cluster_status > > Cluster status of node rabbit@chrnc-void-testupgrade-control-2 ... > > [{nodes,[{disc,['rabbit@chrnc-void-testupgrade-control-0', > > 'rabbit@chrnc-void-testupgrade-control-0-replace', > > 'rabbit@chrnc-void-testupgrade-control-1', > > 'rabbit@chrnc-void-testupgrade-control-2']}]}, > > {running_nodes,['rabbit@chrnc-void-testupgrade-control-0-replace', > > 'rabbit@chrnc-void-testupgrade-control-1', > > 'rabbit@chrnc-void-testupgrade-control-2']}, > > {cluster_name,<<"rabbit(a)chrnc-void-testupgrade-control-0.dev.chtrse.com">>}, > > {partitions,[]}, > > {alarms,[{'rabbit@chrnc-void-testupgrade-control-0-replace',[]}, > > {'rabbit@chrnc-void-testupgrade-control-1',[]}, > > {'rabbit@chrnc-void-testupgrade-control-2',[]}]}] > > > > After that I create a new VM to verify that the cluster is still working, and then perform the same procedure on control1. When I shut down services on control1, the ansible playbook finishes successfully: > > > > kolla-ansible -i ../multinode stop --yes-i-really-really-mean-it --limit control1 > > … > > control1 : ok=45 changed=22 unreachable=0 failed=0 skipped=105 rescued=0 ignored=0 > > > > After this my RMQ admin page stops responding. When I check RMQ on the new control0 and the existing control2, the container is still up but RMQ is not running: > > > > (rabbitmq)[root@chrnc-void-testupgrade-control-0-replace /]# rabbitmqctl cluster_status > > Error: this command requires the 'rabbit' app to be running on the target node. Start it with 'rabbitmqctl start_app'. > > > > If I start it on control0 and control2, then the cluster seems normal and the admin page starts working again, and cluster status looks normal: > > > > (rabbitmq)[root@chrnc-void-testupgrade-control-0-replace /]# rabbitmqctl cluster_status > > Cluster status of node rabbit@chrnc-void-testupgrade-control-0-replace ... > > [{nodes,[{disc,['rabbit@chrnc-void-testupgrade-control-0', > > 'rabbit@chrnc-void-testupgrade-control-0-replace', > > 'rabbit@chrnc-void-testupgrade-control-1', > > 'rabbit@chrnc-void-testupgrade-control-2']}]}, > > {running_nodes,['rabbit@chrnc-void-testupgrade-control-2', > > 'rabbit@chrnc-void-testupgrade-control-0-replace']}, > > {cluster_name,<<"rabbit(a)chrnc-void-testupgrade-control-0.dev.chtrse.com">>}, > > {partitions,[]}, > > {alarms,[{'rabbit@chrnc-void-testupgrade-control-2',[]}, > > {'rabbit@chrnc-void-testupgrade-control-0-replace',[]}]}] > > > > But my hypervisors are down: > > > > (openstack) [root@chrnc-void-testupgrade-build kolla-ansible]# ohll > > +----+-------------------------------------------------+-----------------+--------------+-------+------------+-------+----------------+-----------+ > > | ID | Hypervisor Hostname | Hypervisor Type | Host IP | State | vCPUs Used | vCPUs | Memory MB Used | Memory MB | > > +----+-------------------------------------------------+-----------------+--------------+-------+------------+-------+----------------+-----------+ > > | 3 | chrnc-void-testupgrade-compute-2.dev.chtrse.com | QEMU | 172.16.2.106 | down | 5 | 8 | 2560 | 30719 | > > | 6 | chrnc-void-testupgrade-compute-0.dev.chtrse.com | QEMU | 172.16.2.31 | down | 5 | 8 | 2560 | 30719 | > > | 9 | chrnc-void-testupgrade-compute-1.dev.chtrse.com | QEMU | 172.16.0.30 | down | 5 | 8 | 2560 | 30719 | > > +----+-------------------------------------------------+-----------------+--------------+-------+------------+-------+----------------+-----------+ > > > > When I look at the nova-compute.log on a compute node, I see RMQ failures every 10 seconds: > > > > 172.16.2.31 compute0 > > 2021-03-30 03:07:54.893 7 ERROR oslo.messaging._drivers.impl_rabbit [req-70d69b45-c3a7-4fbc-b709-4d7d757e09e7 - - - - -] [aeb317a8-873f-49be-a2a0-c6d6e0891a3e] AMQP server on 172.16.1.132:5672 is unreachable: timed out. Trying again in 1 seconds.: timeout: timed out > > 2021-03-30 03:07:55.905 7 INFO oslo.messaging._drivers.impl_rabbit [req-70d69b45-c3a7-4fbc-b709-4d7d757e09e7 - - - - -] [aeb317a8-873f-49be-a2a0-c6d6e0891a3e] Reconnected to AMQP server on 172.16.1.132:5672 via [amqp] client with port 56422. > > 2021-03-30 03:08:05.915 7 ERROR oslo.messaging._drivers.impl_rabbit [req-70d69b45-c3a7-4fbc-b709-4d7d757e09e7 - - - - -] [aeb317a8-873f-49be-a2a0-c6d6e0891a3e] AMQP server on 172.16.1.132:5672 is unreachable: timed out. Trying again in 1 seconds.: timeout: timed out > > > > In the RMQ logs I see this every 10 seconds: > > > > 172.16.1.132 control2 > > [root@chrnc-void-testupgrade-control-2 ~]# tail -f /var/log/kolla/rabbitmq/rabbit\(a)chrnc-void-testupgrade-control-2.log |grep 172.16.2.31 > > 2021-03-30 03:07:54.895 [warning] <0.13247.35> closing AMQP connection <0.13247.35> (172.16.2.31:56420 -> 172.16.1.132:5672 - nova-compute:7:aeb317a8-873f-49be-a2a0-c6d6e0891a3e, vhost: '/', user: 'openstack'): > > client unexpectedly closed TCP connection > > 2021-03-30 03:07:55.901 [info] <0.15288.35> accepting AMQP connection <0.15288.35> (172.16.2.31:56422 -> 172.16.1.132:5672) > > 2021-03-30 03:07:55.903 [info] <0.15288.35> Connection <0.15288.35> (172.16.2.31:56422 -> 172.16.1.132:5672) has a client-provided name: nova-compute:7:aeb317a8-873f-49be-a2a0-c6d6e0891a3e > > 2021-03-30 03:07:55.904 [info] <0.15288.35> connection <0.15288.35> (172.16.2.31:56422 -> 172.16.1.132:5672 - nova-compute:7:aeb317a8-873f-49be-a2a0-c6d6e0891a3e): user 'openstack' authenticated and granted access to vhost '/' > > 2021-03-30 03:08:05.916 [warning] <0.15288.35> closing AMQP connection <0.15288.35> (172.16.2.31:56422 -> 172.16.1.132:5672 - nova-compute:7:aeb317a8-873f-49be-a2a0-c6d6e0891a3e, vhost: '/', user: 'openstack'): > > > > Why does RMQ fail when I shut down the 2nd controller after successfully replacing the first one? Hi Albert, Could you share the versions of RabbitMQ and erlang in both versions of the container? When initially testing this setup, I think we had 3.7.24 on both sides. Perhaps the CentOS 8 version has moved on sufficiently to become incompatible? Mark > > > > I apologize for the nonsense below. I have not been able to stop it from being attached to my external emails. > > > > The contents of this e-mail message and > any attachments are intended solely for the > addressee(s) and may contain confidential > and/or legally privileged information. If you > are not the intended recipient of this message > or if this message has been addressed to you > in error, please immediately alert the sender > by reply e-mail and then delete this message > and any attachments. If you are not the > intended recipient, you are notified that > any use, dissemination, distribution, copying, > or storage of this message or any attachment > is strictly prohibited. E-MAIL CONFIDENTIALITY NOTICE: The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited.

1 0

[ironic] IPA does not want boot with UEFI
by Vuk.Gojnic＠telekom.de 01 Apr '21

01 Apr '21

Hello everybody, I am using Ironic standalone to provision the HPE Gen10+ node via iLO driver. Ironic version is 16.0.1. Server is configured with UEFI boot mode. Everything on Ironic side works fine. It creates ISO image, powers the server on and configures it to boot from it. Here is the what /var/log/ironic/ironic-conductor.log says: 2021-03-31 17:46:25.541 2618460 INFO ironic.conductor.task_manager [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 moved to provision state "cleaning" from state "manageable"; target provision state is "available" 2021-03-31 17:46:32.066 2618460 INFO ironic.drivers.modules.ilo.power [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] The node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 operation of 'power off' is completed in 4 seconds. 2021-03-31 17:46:32.088 2618460 INFO ironic.conductor.utils [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Successfully set node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 power state to power off by power off. 2021-03-31 17:46:34.510 2618460 INFO ironic.drivers.modules.ilo.common [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 pending boot mode is uefi. 2021-03-31 17:46:37.248 2618460 INFO ironic.drivers.modules.ilo.common [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Set the node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 to boot from URL https://10.23.137.234/tmp-images/ilo/boot-ed25569f-c107-4fe0-95cd-74fcad9ab… successfully. 2021-03-31 17:46:48.367 2618460 INFO ironic.drivers.modules.ilo.power [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] The node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 operation of 'power on' is completed in 8 seconds. 2021-03-31 17:46:48.388 2618460 INFO ironic.conductor.utils [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Successfully set node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 power state to power on by rebooting. 2021-03-31 17:46:48.404 2618460 INFO ironic.conductor.task_manager [req-b6a19234-5f4b-4852-ab41-4102b9016bb0 - - - - -] Node ed25569f-c107-4fe0-95cd-74fcad9ab3f0 moved to provision state "clean wait" from state "cleaning"; target provision state is "available" The Grub2 starts and after I select the option "boot_partition", it starts booting and immediately freezes with following screen (just red static underscore): [cid:image002.jpg@01D726EE.A920A5C0] I have tried with pre-built IPA images (see below) as well as with custom IPA images made with Ubuntu 18.04 and 20.04 (built using ironic-python-agent-builder) but it is all the same. Does somebody have idea what is the problem with IPA and UEFI in this particular scenario? Output of "openstack baremetal node show" command: allocation_uuid: null automated_clean: null bios_interface: no-bios boot_interface: ilo-uefi-https chassis_uuid: null clean_step: {} conductor: 10.23.137.234 conductor_group: '' console_enabled: false console_interface: no-console created_at: '2021-03-21T13:54:25+00:00' deploy_interface: direct deploy_step: {} description: null driver: ilo5 driver_info: ilo_address: 10.23.137.137 ilo_bootloader: https://ironic-images/Images/esp.img ilo_deploy_kernel: https://ironic-images/Images/ipa-centos8-stable-victoria.kernel ilo_deploy_ramdisk: https://ironic-images/Images/ipa-centos8-stable-victoria.initramfs ilo_password: '******' ilo_username: Administrator snmp_auth_priv_password: '******' snmp_auth_prot_password: '******' snmp_auth_user: iloinspect driver_internal_info: agent_continue_if_ata_erase_failed: false agent_enable_ata_secure_erase: true agent_erase_devices_iterations: 1 agent_erase_devices_zeroize: true agent_erase_skip_read_only: false agent_secret_token: '******' agent_secret_token_pregenerated: true clean_steps: null disk_erasure_concurrency: 1 last_power_state_change: '2021-03-31T17:46:37.894667' extra: {} fault: clean failure inspect_interface: ilo inspection_finished_at: '2021-03-21T13:57:33+00:00' inspection_started_at: null instance_info: deploy_boot_mode: uefi instance_uuid: null last_error: null lessee: null maintenance: true maintenance_reason: management_interface: ilo5 name: null network_data: {} network_interface: noop owner: null power_interface: ilo power_state: power on properties: cpu_arch: x86 cpus: 64 local_gb: 2979 memory_mb: 262144 protected: false protected_reason: null provision_state: clean wait provision_updated_at: '2021-03-31T17:46:48+00:00' raid_config: {} raid_interface: no-raid rescue_interface: no-rescue reservation: null resource_class: null retired: false retired_reason: null storage_interface: noop target_power_state: null target_provision_state: available target_raid_config: {} traits: [] updated_at: '2021-03-31T17:46:48+00:00' uuid: ed25569f-c107-4fe0-95cd-74fcad9ab3f0 vendor_interface: no-vendor Many thanks! Vuk Gojnic Deutsche Telekom Technik GmbH Services & Plattforms (T-SP) Tribe Data Center Infrastructure (T-DCI) Super Squad Cloud Platforms Lifecycle (SSQ-CP) Vuk Gojnic Kubernetes Engine Squad Lead

1 0

Re: [glance][openstack-ansible] Snapshots disappear during saving
by Oliver Wenz 01 Apr '21

01 Apr '21

> So according to the issue, you get 503 while trying to reach > 10.0.3.212:6002/os-objects, which is swift_account_port. > Are there any logs specificly for swift-account? > > Also I guess some adjustments are required for swift as well for this > mechanism to work. > > Eventually I believe the original issue you saw might be related to this > doc: > https://docs.openstack.org/keystone/latest/admin/manage-services.html#confi… Hi Dmitriy, I tried setting 'service_token_roles_required = false' in glance-api.conf but the error is still there. I also checked the account server and I'm seeing lots of 404's: Apr 01 09:31:33 bc1bl12 account-server[694822]: 10.0.3.212 - - [01/Apr/2021:09:31:33 +0000] "GET /os-objects/22/.misplaced_objects" 404 - "GET http://localhost/v1/.misplaced_objects?format=json&marker=&end_marker=&pref…" "tx3794c20a6ef5476f9fcf6-00606592f5" "proxy-server 13882" 0.0007 "-" 694822 - Apr 01 09:32:03 bc1bl12 account-server[694816]: 10.0.3.212 - - [01/Apr/2021:09:32:03 +0000] "HEAD /os-objects/22/.misplaced_objects" 404 - "HEAD http://localhost/v1/.misplaced_objects?format=json" "tx5491e866bc6447d8917f9-0060659313" "proxy-server 13882" 0.0008 "-" 694816 - Apr 01 09:32:03 bc1bl12 account-server[694814]: 10.0.3.212 - - [01/Apr/2021:09:32:03 +0000] "GET /os-objects/22/.misplaced_objects" 404 - "GET http://localhost/v1/.misplaced_objects?format=json&marker=&end_marker=&pref…" "txc98a949e82c940d19656b-0060659313" "proxy-server 13882" 0.0007 "-" 694814 - Apr 01 09:32:33 bc1bl12 account-server[694817]: 10.0.3.212 - - [01/Apr/2021:09:32:33 +0000] "HEAD /os-objects/22/.misplaced_objects" 404 - "HEAD http://localhost/v1/.misplaced_objects?format=json" "txd9ec46414b8e4a98a2b94-0060659331" "proxy-server 13882" 0.0008 "-" 694817 - Apr 01 09:32:33 bc1bl12 account-server[694817]: 10.0.3.212 - - [01/Apr/2021:09:32:33 +0000] "GET /os-objects/22/.misplaced_objects" 404 - "GET http://localhost/v1/.misplaced_objects?format=json&marker=&end_marker=&pref…" "tx972d968e71e94eb683558-0060659331" "proxy-server 13882" 0.0011 "-" 694817 - Apr 01 09:32:43 bc1bl12 account-server[694823]: 10.0.3.212 - - [01/Apr/2021:09:32:43 +0000] "HEAD /os-objects/220/.expiring_objects" 404 - "HEAD http://localhost/v1/.expiring_objects?format=json" "tx4d02362089c4497982940-006065933b" "proxy-server 14171" 0.0008 "-" 694823 - Apr 01 09:33:03 bc1bl12 account-server[694822]: 10.0.3.212 - - [01/Apr/2021:09:33:03 +0000] "HEAD /os-objects/22/.misplaced_objects" 404 - "HEAD http://localhost/v1/.misplaced_objects?format=json" "tx440963ca3e7948ff872ab-006065934f" "proxy-server 13882" 0.0007 "-" 694822 - Apr 01 09:33:03 bc1bl12 account-server[694823]: 10.0.3.212 - - [01/Apr/2021:09:33:03 +0000] "GET /os-objects/22/.misplaced_objects" 404 - "GET http://localhost/v1/.misplaced_objects?format=json&marker=&end_marker=&pref…" "tx547157ac468e476395a0e-006065934f" "proxy-server 13882" 0.0006 "-" 694823 - Apr 01 09:33:33 bc1bl12 account-server[694814]: 10.0.3.212 - - [01/Apr/2021:09:33:33 +0000] "HEAD /os-objects/22/.misplaced_objects" 404 - "HEAD http://localhost/v1/.misplaced_objects?format=json" "txac5c0207e90a4606a7758-006065936d" "proxy-server 13882" 0.0007 "-" 694814 - Apr 01 09:33:33 bc1bl12 account-server[694820]: 10.0.3.212 - - [01/Apr/2021:09:33:33 +0000] "GET /os-objects/22/.misplaced_objects" 404 - "GET http://localhost/v1/.misplaced_objects?format=json&marker=&end_marker=&pref…" "tx0d3afe2f421647f2a117e-006065936d" "proxy-server 13882" 0.0006 "-" 694820 - Kind regards, Oliver

1 0

[cinder][nova][requirements] RFE requested for os-brick
by Brian Rosmaita 01 Apr '21

01 Apr '21

Hello Requirements Team, The Cinder team recently became aware of a potential data-loss bug [0] that has been fixed in os-brick master [1] and backported to os-brick stable/wallaby [2]. We've proposed a release of os-brick 4.4.0 from stable/wallaby [3] and are petitioning for an RFE to include 4.4.0 in the wallaby release. We have three jobs running tempest with os-brick source in master that have passed with [1]: os-brick-src-devstack-plugin-ceph [4], os-brick-src-tempest-lvm-lio-barbican [5],and os-brick-src-tempest-nfs [6]. The difference between os-brick master (at the time the tests were run) and stable/wallaby since the 4.3.0 tag is as follows: master: d4205bd 3 days ago iSCSI: Fix flushing after multipath cfg change (Gorka Eguileor) 0e63fe8 2 weeks ago Merge "RBD: catch read exceptions prior to modifying offset" (Zuul) 28545c7 4 months ago RBD: catch read exceptions prior to modifying offset (Jon Bernard) 99b2c60 2 weeks ago Merge "Dropping explicit unicode literal" (Zuul) 7cfdb76 6 weeks ago Dropping explicit unicode literal (tushargite96) 9afa1a0 3 weeks ago Add Python3 xena unit tests (OpenStack Release Bot) ab57392 3 weeks ago Update master for stable/wallaby (OpenStack Release Bot) 91a1cca 3 weeks ago (tag: 4.3.0) Merge "NVMeOF connector driver connection information compatibility fix" (Zuul) stable/wallaby: f86944b 3 days ago Add release note prelude for os-brick 4.4.0 (Brian Rosmaita) c70d70b 3 days ago iSCSI: Fix flushing after multipath cfg change (Gorka Eguileor) 6649b8d 3 weeks ago Update TOX_CONSTRAINTS_FILE for stable/wallaby (OpenStack Release Bot) f3f93dc 3 weeks ago Update .gitreview for stable/wallaby (OpenStack Release Bot) 91a1cca 3 weeks ago (tag: 4.3.0) Merge "NVMeOF connector driver connection information compatibility fix" (Zuul) This gives us very high confidence that the results of the tests run against master also apply to stable/wallaby at f86944b. Thank you for considering this request. (I've included Nova here because the bug occurs when the configuration option that enables multipath connections on a compute is changed while volumes are attached, so if this RFE is approved, nova might want to raise the minimum version of os-brick in wallaby to 4.4.0.) [0] https://launchpad.net/bugs/1921381 [1] https://review.opendev.org/c/openstack/os-brick/+/782992 [2] https://review.opendev.org/c/openstack/os-brick/+/783207 [3] https://review.opendev.org/c/openstack/releases/+/783641 [4] https://zuul.opendev.org/t/openstack/build/30a103668e4c4a8cb6f1ef907ef3edcb [5] https://zuul.opendev.org/t/openstack/build/bb11eef737d34c41bb4a52f8433850b0 [6] https://zuul.opendev.org/t/openstack/build/3ad3359ca712432d9ef4261d72c787fa

4 9

[neutron] Drivers team meeting 02.04.2021 cancelled
by Slawek Kaplonski 31 Mar '21

31 Mar '21

Hi, As tomorrow's Good Friday is public holiday in many countries, at least in Europe, and I will also be on PTO, let's cancel the drivers meeting. Have a great holidays and see You on the meeting next week. -- Slawek Kaplonski Principal Software Engineer Red Hat

1 0

Retiring the planet.openstack.org service
by Ian Wienand 31 Mar '21

31 Mar '21

Hello, We plan to retire the planet.openstack.org RSS aggregation service soon. The host is running an unsupported distribution, and we have not found any open source alternatives that seem to be currently maintained and deployable. On consideration of our limited infra resources, we feel it will be better to sunset this service at this time. It is likely that effort will be better spent getting information to more relevant channels in 2021, such as social media sites, etc. I have extracted an OPML file of the active blogs in [1]; most every feed reader can import this file. Thanks, -i [1] https://review.opendev.org/c/opendev/system-config/+/784191

1 0