<div dir="ltr"><div>Hi!</div><div><br></div><div>I'm trying to install (Fuel 6.0) a cluster (HA) of 5 nodes, designated as:</div><div><br></div><div>Controllers: 3 x Dell PowerEdge 2950 (2 NIC onboard + 1 added) Compute: 2 x</div><div>Dell PowerEdge R710 (4 NIC onboard)</div><div><br></div><div>I want to use Neutron VLAN Segmentation Planning (3 NICs, as in</div><div><a href="https://docs.mirantis.com/openstack/fuel/fuel-6.0/_images/preinstall_d_vlan_3nics.png">https://docs.mirantis.com/openstack/fuel/fuel-6.0/_images/preinstall_d_vlan_3nics.png</a></div><div>).</div><div><br></div><div>I have set up the VLANs as in the picture, the only detail I was not sure about</div><div>is whether to configure eth2 in fuelmenu or leave it blank, but it should not</div><div>make any difference.</div><div><br></div><div>The main problem is that, while installing the controllers, the public gateway</div><div>cannot be reached and the install fails after a 600 seconds timeout (at about</div><div>77% - like in <a href="https://bugs.launchpad.net/mos/+bug/1424708">https://bugs.launchpad.net/mos/+bug/1424708</a> and</div><div><a href="https://bugs.launchpad.net/fuel/+bug/1396126">https://bugs.launchpad.net/fuel/+bug/1396126</a> ).</div><div><br></div><div>If I use the R710 servers as controllers with the same setup, everything</div><div>installs correctly and the gateway works as well.</div><div><br></div><div>The only relevant difference I can think of is that the additional card in the</div><div>2950s is seen as eth0, therefore the PXE boot happens on eth1 and I have to</div><div>reassign the logical networks accordingly in the Fuel UI. The R710s boot from</div><div>eth0.</div><div><br></div><div>Could this really be the problem? A similar bug was fixed in Fuel 4:</div><div><a href="https://bugs.launchpad.net/fuel/+bug/1269920">https://bugs.launchpad.net/fuel/+bug/1269920</a></div><div><br></div><div>but I have the same behavior with Ubuntu AND CentOS.</div><div><br></div><div>Should I change the detection order in the udev configuration? If I do that,</div><div>how do I prevent the server from installing openstack while I manually change</div><div>70-persistent-net.rules ? And more importantly, how to let Fuel know that I</div><div>renamed the interfaces?</div><div><br></div><div>I have previously installed small clusters with FlatDHCP and Neutron/GRE, but</div><div>had serious performance issues with the latter, probably due to MTU mismatches</div><div>and thought it would be easier to change network architecture. All I care about</div><div>is to have Neutron, performance is not critical but the throughput with GRE was</div><div>about a hundredth of what it should be. I decided to postpone the GRE troubleshooting</div><div>until v6.1</div><div><br></div><div>Let me know if I can provide more details, and thanks in advance for any help.</div><div><br></div><div>--</div><div>Marco</div><div><br></div></div>