<div dir="ltr"><div><div><div><div>Hi Anatoly,<br><br></div>I have installed openstack by packstack before, maybe my installation can help you.<br><br></div>First, you don't need to create Linux bridge before you use packstack. PackStack enable Neutron by default, so you should configure OpenVSwitch bridge instead of Linux bridge.<br>
<br></div>Second, as you use eth0 to connect to external network, you should make the br-ex's same to eth0's IP, and make eth0 as a port of br-ex, these all configure by ifcfg. For example, here is my network configure of my vm which run packstack :<br>
<br></div><div>eth0:<br>DEVICE=eth0<br>ONBOOT=yes<br>HWADDR=00:E0:81:D8:43:BE<br>TYPE=OVSPort<br>DEVICETYPE=ovs<br>OVS_BRIDGE=br-ex<br><br></div><div>br-ex:<br><pre class="">DEVICE=br-ex
DEVICETYPE=ovs
TYPE=OVSBridge
BOOTPROTO=<span class="">static</span>
IPADDR=10.1.199.8 # Note, this is your IP of eth0 before, to connect to external network!
NETMASK=255.255.255.0
ONBOOT=yes<br><br></pre><pre class="">Third, the eth1 doesn't matter as packstack enabled ip namespace if you use all-in-one in mp opinion.<br>You can use "ip netns" to make sure you have enabled ip namespace.<br>
<br></pre>Hope this helps,<br><br></div><div>Damon<br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">2014-02-22 14:42 GMT+08:00 Heling Yao <span dir="ltr"><<a href="mailto:yaoheling@gmail.com" target="_blank">yaoheling@gmail.com</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<br>
As you're using RDO, you can take a look at your answer file used during packstack installation. You can also search <a href="http://openstack.redhat.com/forum/" target="_blank">http://openstack.redhat.com/<u></u>forum/</a> see if there are relevant questions/answers.<br>
<br>
<br>
Cheers,<br>
<br>
Heling<div class="HOEnZb"><div class="h5"><br>
<br>
On 02/21/2014 10:06 PM, Anatoly Oreshkin wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hello,<br>
<br>
I've installed Openstack Havana (with Neutron networking) on single node running<br>
Scientifcic Linux 6.4 (RHEL 6.4) using packstack --allinone.<br>
<br>
Installer have created only one bridge - br-ex:<br>
# ovs-vsctl show<br>
76aa02e5-a442-40c6-8c77-<u></u>e0471d1a8256<br>
Bridge br-ex<br>
Port br-ex<br>
Interface br-ex<br>
type: internal<br>
ovs_version: "1.11.0"<br>
<br>
<br>
My single node has 2 physical NICs, eth0 & eth1. eth0 is for connection to local<br>
(external) network and<br>
eth1 for internal (cluster) network.<br>
Before installing Openstack I created 2 linux bridges, br0 is on eth0, br1 is on eth1<br>
to be able to launch virtual machine (with 2 network interfaces) in KVM.<br>
<br>
Command "route" shows:<br>
<br>
Kernel IP routing table<br>
Destination Gateway Genmask Flags Metric Ref Use Iface<br>
239.2.11.72 * 255.255.255.255 UH 0 0 0 br1<br>
172.24.4.224 * 255.255.255.240 U 0 0 0 br-ex<br>
212.192.96.128 * 255.255.255.224 U 0 0 0 br0<br>
192.168.1.0 * 255.255.255.0 U 0 0 0 br1<br>
link-local * 255.255.0.0 U 1007 0 0 br0<br>
link-local * 255.255.0.0 U 1008 0 0 br1<br>
link-local * 255.255.0.0 U 1023 0 0 br-ex<br>
default 212.192.96.129 0.0.0.0 UG 0 0 0 br0<br>
<br>
Here br0 is for external network, br1 for internal network.<br>
<br>
<br>
As far as understand one more bridge br-int should be created. How to create it ?<br>
Bridges br-ex and br-int should be associated with physical NICs ?<br>
But eth0 & eth1 are already are assigned to bridges br0 & br1 respectively<br>
<br>
Can anybody help me to clarify this issue ?<br>
May be some commands ?<br>
<br>
Thanks.<br>
Anatoly.<br>
<br>
<br>
______________________________<u></u>_________________<br>
Mailing list: <a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack" target="_blank">http://lists.openstack.org/<u></u>cgi-bin/mailman/listinfo/<u></u>openstack</a><br>
Post to : <a href="mailto:openstack@lists.openstack.org" target="_blank">openstack@lists.openstack.org</a><br>
Unsubscribe : <a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack" target="_blank">http://lists.openstack.org/<u></u>cgi-bin/mailman/listinfo/<u></u>openstack</a><br>
</blockquote>
<br>
<br>
______________________________<u></u>_________________<br>
Mailing list: <a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack" target="_blank">http://lists.openstack.org/<u></u>cgi-bin/mailman/listinfo/<u></u>openstack</a><br>
Post to : <a href="mailto:openstack@lists.openstack.org" target="_blank">openstack@lists.openstack.org</a><br>
Unsubscribe : <a href="http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack" target="_blank">http://lists.openstack.org/<u></u>cgi-bin/mailman/listinfo/<u></u>openstack</a><br>
</div></div></blockquote></div><br></div>