Hello,<br>I recently installed Grizzly (single-node) on Ubuntu 13.04 on x86 64 bit having two physical NICs. I posted about the networking issues that I was facing after the installation in an earlier post.<br>Well, while I was debugging the networking issue, I came across a more serious issue -- my host machine got rebooted (power-cycle) and on reboot I see that my two VMs are shown in "shut-off" Status and "shut-down" Power state in the Dashboard GUI. The options available to me are only "soft reboot", "hard reboot", "terminate instance", "Disassociate Floating IP" and "Edit Instance". I did first "soft reboot" and the console shows "No bootable device". Then i tried "Hard reboot" and again the same message "No bootable device".<br>

I checked that all services are running fine and there are no error messages in the logs for nova, quantum, etc.<br><br>I followed installation instructions based on the following link:<br><a href="https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide/blob/OVS_SingleNode/OpenStack_Grizzly_Install_Guide.rst" target="_blank">https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide/blob/OVS_SingleNode/OpenStack_Grizzly_Install_Guide.rst</a><br>
<br>Thanks,<br>Nikhil<br>
<br>