[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-80-virtual (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #116-Ubuntu SMP Mon Mar 23 17:28:52 UTC 2015 (Ubuntu 3.2.0-80.116-virtual 3.2.68) [ 0.000000] Command line: root=/dev/vda console=tty0 console=ttyS0 no_timer_check [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable) [ 0.000000] BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f6620] f6620 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffe0000 [ 0.000000] RAMDISK: 1fc4e000 - 1ffe0000 [ 0.000000] ACPI: RSDP 00000000000f6420 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000001ffe16ee 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000001ffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000001ffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 000000001ffe0000 00040 [ 0.000000] ACPI: SSDT 000000001ffe0c88 009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000001ffe163e 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000001ffe16b6 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001ffe0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000001ffe0000 [ 0.000000] NODE_DATA [000000001fc46000 - 000000001fc4afff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffe0 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s78848 r8192 d23552 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 128874 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/vda console=tty0 console=ttyS0 no_timer_check [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 495968k/524160k available (6576k kernel code, 452k absent, 27740k reserved, 6620k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using HPET reference calibration [ 0.000000] Detected 1595.978 MHz processor. [ 0.033614] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.95 BogoMIPS (lpj=6383912) [ 0.035487] pid_max: default: 32768 minimum: 301 [ 0.042736] Security Framework initialized [ 0.045944] AppArmor: AppArmor initialized [ 0.046404] Yama: becoming mindful. [ 0.052002] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.054505] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.060329] Mount-cache hash table entries: 256 [ 0.073915] Initializing cgroup subsys cpuacct [ 0.074815] Initializing cgroup subsys memory [ 0.076004] Initializing cgroup subsys devices [ 0.076004] Initializing cgroup subsys freezer [ 0.076113] Initializing cgroup subsys blkio [ 0.076531] Initializing cgroup subsys perf_event [ 0.080004] mce: CPU supports 10 MCE banks [ 0.082095] SMP alternatives: switching to UP code [ 0.557926] Freeing SMP alternatives: 24k freed [ 0.560760] ACPI: Core revision 20110623 [ 0.630345] ftrace: allocating 26610 entries in 105 pages [ 0.665997] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.668154] CPU0: AMD QEMU Virtual CPU version 2.4.0 stepping 03 [ 0.672041] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms [ 0.672041] APIC delta adjusted to PM-Timer: 6249963 (6493307) [ 0.672041] Performance Events: Broken PMU hardware detected, using software events only. [ 0.681295] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.682833] Brought up 1 CPUs [ 0.683367] Total of 1 processors activated (3191.95 BogoMIPS). [ 0.714150] devtmpfs: initialized [ 0.775119] EVM: security.selinux [ 0.775532] EVM: security.SMACK64 [ 0.776083] EVM: security.capability [ 0.803265] print_constraints: dummy: [ 0.805417] RTC time: 14:17:09, date: 09/13/16 [ 0.808548] NET: Registered protocol family 16 [ 0.818548] ACPI: bus type pci registered [ 0.824875] PCI: Using configuration type 1 for base access [ 0.865229] bio: create slab at 0 [ 0.872755] ACPI: Added _OSI(Module Device) [ 0.873408] ACPI: Added _OSI(Processor Device) [ 0.873925] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.874483] ACPI: Added _OSI(Processor Aggregator Device) [ 0.936057] ACPI: Interpreter enabled [ 0.936057] ACPI: (supports S0 S3 S4 S5) [ 0.938268] ACPI: Using IOAPIC for interrupt routing [ 0.999910] ACPI: No dock devices found. [ 1.000061] HEST: Table not found. [ 1.000061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.000061] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.000632] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.001373] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.002040] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.004114] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] [ 1.032231] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 1.033064] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 1.921478] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.977157] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.979582] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.981331] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.983217] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.984123] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.994923] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.996285] vgaarb: loaded [ 1.996621] vgaarb: bridge control possible 0000:00:02.0 [ 2.000124] i2c-core: driver [aat2870] using legacy suspend method [ 2.000124] i2c-core: driver [aat2870] using legacy resume method [ 2.000298] SCSI subsystem initialized [ 2.005204] usbcore: registered new interface driver usbfs [ 2.006388] usbcore: registered new interface driver hub [ 2.007576] usbcore: registered new device driver usb [ 2.011696] PCI: Using ACPI for IRQ routing [ 2.025515] NetLabel: Initializing [ 2.025910] NetLabel: domain hash size = 128 [ 2.026347] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.029162] NetLabel: unlabeled traffic allowed by default [ 2.031271] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 2.032126] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.032580] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 2.046911] Switching to clocksource hpet [ 2.268613] AppArmor: AppArmor Filesystem Enabled [ 2.270390] pnp: PnP ACPI init [ 2.271631] ACPI: bus type pnp registered [ 2.294561] pnp: PnP ACPI: found 11 devices [ 2.295053] ACPI: ACPI bus type pnp unregistered [ 2.350253] NET: Registered protocol family 2 [ 2.391626] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 2.401886] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 2.404302] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 2.406442] TCP: Hash tables configured (established 16384 bind 16384) [ 2.407196] TCP reno registered [ 2.407744] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.408760] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.411882] NET: Registered protocol family 1 [ 2.413273] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.413920] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.414823] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.420974] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.421978] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 2.424564] pci 0000:00:01.2: PCI INT D disabled [ 2.445522] Trying to unpack rootfs image as initramfs... [ 2.465656] audit: initializing netlink socket (disabled) [ 2.467270] type=2000 audit(1473776230.464:1): initialized [ 2.745445] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.823144] VFS: Disk quotas dquot_6.5.2 [ 2.824876] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.841136] fuse init (API version 7.17) [ 2.843594] msgmni has been set to 968 [ 2.885738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.889188] io scheduler noop registered [ 2.889664] io scheduler deadline registered (default) [ 2.890928] io scheduler cfq registered [ 2.894549] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.897179] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.902659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.904165] ACPI: Power Button [PWRF] [ 2.963679] ERST: Table is not found! [ 2.964088] GHES: HEST is not enabled! [ 2.976115] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 2.977244] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10 [ 2.981291] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 2.990058] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 2.990622] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10 [ 3.001219] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.028637] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.085559] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.201329] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.256388] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.288000] Linux agpgart interface v0.103 [ 3.362130] brd: module loaded [ 3.390587] loop: module loaded [ 3.429641] Refined TSC clocksource calibration: 1595.979 MHz. [ 3.430392] Switching to clocksource tsc [ 3.448878] vda: unknown partition table [ 3.508727] scsi0 : ata_piix [ 3.512198] scsi1 : ata_piix [ 3.515534] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 [ 3.516568] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 [ 3.527545] Fixed MDIO Bus: probed [ 3.528904] tun: Universal TUN/TAP device driver, 1.6 [ 3.529283] tun: (C) 1999-2004 Max Krasnyansky [ 3.549107] PPP generic driver version 2.4.2 [ 3.581460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.582825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.584925] uhci_hcd: USB Universal Host Controller Interface driver [ 3.586019] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 3.589604] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 3.606270] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 3.608339] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040 [ 3.634157] hub 1-0:1.0: USB hub found [ 3.635104] hub 1-0:1.0: 2 ports detected [ 3.641082] usbcore: registered new interface driver libusual [ 3.642755] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.647474] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.648505] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.674136] mousedev: PS/2 mouse device common for all mice [ 3.682887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.686380] rtc_cmos 00:01: RTC can wake from S4 [ 3.699317] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 3.702818] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 3.706470] device-mapper: uevent: version 1.0.3 [ 3.727769] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.730040] cpuidle: using governor ladder [ 3.730972] cpuidle: using governor menu [ 3.731367] EFI Variables Facility v0.08 2004-May-17 [ 3.741826] TCP cubic registered [ 3.745712] NET: Registered protocol family 10 [ 3.769510] NET: Registered protocol family 17 [ 3.769824] Registering the dns_resolver key type [ 3.794977] registered taskstats version 1 [ 4.015029] Freeing initrd memory: 3656k freed [ 4.298138] Magic number: 0:200:283 [ 4.300183] rtc_cmos 00:01: setting system clock to 2016-09-13 14:17:13 UTC (1473776233) [ 4.301350] powernow-k8: Processor cpuid 663 not supported [ 4.304286] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.304896] EDD information not available. [ 4.357270] Freeing unused kernel memory: 928k freed [ 4.408778] Write protecting the kernel read-only data: 12288k [ 4.572969] Freeing unused kernel memory: 1596k freed [ 4.674372] Freeing unused kernel memory: 1184k freed info: initramfs: up at 4.90 modprobe: module virtio_blk not found in modules.dep modprobe: module virtio_net not found in modules.dep info: copying initramfs to /dev/vda info: initramfs loading root from /dev/vda info: /etc/init.d/rc.sysinit: up at 10.78 info: container: none Starting logging: OK modprobe: module virtio_blk not found in modules.dep modprobe: module virtio_net not found in modules.dep WARN: /etc/rc3.d/S10-load-modules failed Initializing random number generator... done. Starting acpid: OK cirros-ds 'local' up at 13.77 no results found for mode=local. up 14.31. searched: nocloud configdrive ec2 Starting network... udhcpc (v1.20.1) started Sending discover... Sending discover... [ 98.191753] atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). [ 98.193100] atkbd serio0: Use 'setkeycodes 00 ' to make it known. [ 98.258209] atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0). [ 98.259119] atkbd serio0: Use 'setkeycodes 00 ' to make it known. Sending discover... Usage: /sbin/cirros-dhcpc No lease, failing WARN: /etc/rc3.d/S40-network failed cirros-ds 'net' up at 195.92 checking http://169.254.169.254/2009-04-04/instance-id failed 1/20: up 196.33. request failed failed 2/20: up 198.74. request failed failed 3/20: up 200.99. request failed failed 4/20: up 203.24. request failed failed 5/20: up 205.49. request failed failed 6/20: up 207.72. request failed failed 7/20: up 210.03. request failed failed 8/20: up 212.27. request failed failed 9/20: up 214.55. request failed failed 10/20: up 216.80. request failed failed 11/20: up 219.00. request failed failed 12/20: up 221.25. request failed failed 13/20: up 223.66. request failed failed 14/20: up 225.93. request failed failed 15/20: up 228.11. request failed failed 16/20: up 230.34. request failed failed 17/20: up 232.50. request failed failed 18/20: up 234.67. request failed failed 19/20: up 236.82. request failed failed 20/20: up 239.01. request failed failed to read iid from metadata. tried 20 no results found for mode=net. up 241.18. searched: nocloud configdrive ec2 failed to get instance-id of datasource Starting dropbear sshd: generating rsa key... generating dsa key... OK === system information === Platform: OpenStack Foundation OpenStack Nova Container: none Arch: x86_64 CPU(s): 1 @ 1595.978 MHz Cores/Sockets/Threads: 1/1/1 Virt-type: AMD-V RAM Size: 491MB Disks: NAME MAJ:MIN SIZE LABEL MOUNTPOINT vda 253:0 1073741824 cirros-rootfs / === sshd host keys === -----BEGIN SSH HOST KEY KEYS----- ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCdiV9xsUUKAkaiREZPrat4D1CtA9jA863J0mrTHckqTzJl5yYdiyYfdIKVmaE642M9TKSUc0WuA9+ZS2Cb9vgWCUHNqRtVt+OZZEMqs1GwFPenOGS3k1Ke2yCg+Vqc49tfBC8+Zbf8iyHwOp62UIemTFcCP+cxlb+mTMK1bF6HVFiH root@cirros ssh-dss 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 root@cirros -----END SSH HOST KEY KEYS----- === network info === if-info: lo,up,127.0.0.1,8,::1 if-info: eth0,up,,8,fe80::f816:3eff:fe5e:a39b === datasource: None None === === cirros: current=0.3.4 uptime=243.89 === route: fscanf === pinging gateway failed, debugging connection === ############ debug start ############## ### /etc/init.d/sshd start Starting dropbear sshd: OK route: fscanf ### ifconfig -a eth0 Link encap:Ethernet HWaddr FA:16:3E:5E:A3:9B inet6 addr: fe80::f816:3eff:fe5e:a39b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:518 (518.0 B) TX bytes:1132 (1.1 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1020 (1020.0 B) TX bytes:1020 (1020.0 B) ### route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface route: fscanf ### cat /etc/resolv.conf cat: can't open '/etc/resolv.conf': No such file or directory ### gateway not found /sbin/cirros-status: line 1: can't open /etc/resolv.conf: no such file ### pinging nameservers ### uname -a Linux cirros 3.2.0-80-virtual #116-Ubuntu SMP Mon Mar 23 17:28:52 UTC 2015 x86_64 GNU/Linux ### lsmod Module Size Used by Not tainted nls_iso8859_1 12713 0 nls_cp437 16991 0 vfat 17585 0 fat 61512 1 vfat isofs 40259 0 ip_tables 27473 0 x_tables 29891 1 ip_tables pcnet32 42119 0 8139cp 27360 0 ne2k_pci 13691 0 8390 18856 1 ne2k_pci e1000 108589 0 acpiphp 24231 0 ### dmesg | tail [ 5.835953] EXT3-fs (vda): mounted filesystem with ordered data mode [ 6.176605] kjournald starting. Commit interval 5 seconds [ 6.212421] EXT3-fs (vda): using internal journal [ 6.212547] EXT3-fs (vda): mounted filesystem with ordered data mode [ 10.886416] EXT3-fs (vda): using internal journal [ 25.713019] eth0: no IPv6 routers present [ 98.191753] atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). [ 98.193100] atkbd serio0: Use 'setkeycodes 00 ' to make it known. [ 98.258209] atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0). [ 98.259119] atkbd serio0: Use 'setkeycodes 00 ' to make it known. ### tail -n 25 /var/log/messages Sep 13 15:17:21 cirros kern.info kernel: [ 5.267769] acpiphp: Slot [24] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.268757] acpiphp: Slot [25] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.269260] acpiphp: Slot [26] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.269765] acpiphp: Slot [27] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.270420] acpiphp: Slot [28] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.271115] acpiphp: Slot [29] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.271502] acpiphp: Slot [30] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.271950] acpiphp: Slot [31] registered Sep 13 15:17:21 cirros kern.info kernel: [ 5.318979] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI Sep 13 15:17:21 cirros kern.info kernel: [ 5.319035] e1000: Copyright (c) 1999-2006 Intel Corporation. Sep 13 15:17:21 cirros kern.info kernel: [ 5.385196] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker Sep 13 15:17:21 cirros kern.info kernel: [ 5.424791] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Sep 13 15:17:21 cirros kern.info kernel: [ 5.481715] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de Sep 13 15:17:21 cirros kern.info kernel: [ 5.832917] kjournald starting. Commit interval 5 seconds Sep 13 15:17:21 cirros kern.info kernel: [ 5.835953] EXT3-fs (vda): mounted filesystem with ordered data mode Sep 13 15:17:21 cirros kern.info kernel: [ 6.176605] kjournald starting. Commit interval 5 seconds Sep 13 15:17:21 cirros kern.info kernel: [ 6.212421] EXT3-fs (vda): using internal journal Sep 13 15:17:21 cirros kern.info kernel: [ 6.212547] EXT3-fs (vda): mounted filesystem with ordered data mode Sep 13 15:17:21 cirros kern.info kernel: [ 10.886416] EXT3-fs (vda): using internal journal Sep 13 15:17:34 cirros kern.debug kernel: [ 25.713019] eth0: no IPv6 routers present Sep 13 15:18:47 cirros kern.warn kernel: [ 98.191753] atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). Sep 13 15:18:47 cirros kern.warn kernel: [ 98.193100] atkbd serio0: Use 'setkeycodes 00 ' to make it known. Sep 13 15:18:47 cirros kern.warn kernel: [ 98.258209] atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0). Sep 13 15:18:47 cirros kern.warn kernel: [ 98.259119] atkbd serio0: Use 'setkeycodes 00 ' to make it known. Sep 13 15:21:11 cirros authpriv.info dropbear[305]: Running in background ############ debug end ############## ____ ____ ____ / __/ __ ____ ____ / __ \/ __/ / /__ / // __// __// /_/ /\ \ \___//_//_/ /_/ \____/___/ http://cirros-cloud.net login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for root. cirros login: