[Openstack-operators] Help with simplest Quantum setup possible...

Martinx - ジェームズ thiagocmartinsc at gmail.com
Thu Mar 14 18:11:05 UTC 2013


Hi!

 My Quantum Single Flat is almost working!

 My Instance get an IPv4 without any problem but, the metadata isn't
working...

 What can I do?

 My compute node have the `nova-api-metadata' package, nova.conf have
`metadata_host = 10.32.14.234', the iptables `169.254.169.254' NAT rule is
there too...

 The Instance log shows:

Starting network...
udhcpc (v1.20.1) started
Sending discover...
Sending select for 10.33.14.3...
Lease of 10.33.14.3 obtained, lease time 120
deleting routers
route: SIOCDELRT: No such process
adding dns 8.8.4.4
adding dns 8.8.8.8
cirros-ds 'net' up at 1.84
checking http://169.254.169.254/2009-04-04/instance-id
failed 1/20: up 1.87. request failed
failed 2/20: up 13.98. request failed
failed 3/20: up 26.02. request failed
failed 4/20: up 38.06. request failed
failed 5/20: up 50.09. request failed
failed 6/20: up 62.13. request failed
failed 7/20: up 74.16. request failed
failed 8/20: up 86.20. request failed
failed 9/20: up 98.24. request failed
failed 10/20: up 110.27. request failed
failed 11/20: up 122.31. request failed
failed 12/20: up 134.34. request failed
failed 13/20: up 146.38. request failed
failed 14/20: up 158.41. request failed
failed 15/20: up 170.45. request failed
failed 16/20: up 182.49. request failed
failed 17/20: up 194.52. request failed
failed 18/20: up 206.56. request failed
failed 19/20: up 218.59. request failed
failed 20/20: up 230.63. request failed
failed to read iid from metadata. tried 20
no results found for mode=net. up 242.66. searched: nocloud configdrive ec2
failed to get instance-id of datasource
Starting dropbear sshd: generating rsa key... generating dsa key... OK

Any clue?

Thanks!
Thiago


On 13 March 2013 10:10, Daneyon Hansen (danehans) <danehans at cisco.com>wrote:

>
>
> Regards,
> Daneyon Hansen
>
>
> On Mar 13, 2013, at 1:04 AM, "Martinx - ジェームズ" <thiagocmartinsc at gmail.com>
> wrote:
>
>   Guys,
>
>   Here:
> http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html
>
>   ...at the step "1. Install the L2 agent." but, what is the name of the
> Ubuntu package (I'm using Folsom)?
>
>   ...apt-get install what?
>
>
>  quantum-plugin-openvswitch-agent
>
>
>   I thought that the Quantum L2 agent was the package
> `quantum-plugin-linuxbridge' but, this doc uses OpenvSwitch... So, I'm
> confused now...
>
>
>  As you know Quantum uses plugins to realize the network abstractions.
> Some plugins (such as OVS) use an agent to collect information from the
> Quantum db to implement the logical data model on the local vswitch.
>
>
>   The following packages "quantum-server
> quantum-plugin-openvswitch quantum-plugin-openvswitch-agent
> quantum-dhcp-agent" will be enough for my `controller+network node'?
>
> That should work for flat networking implementations.
>
>
>   At the compute-node, I'll install only the
> "quantum-plugin-openvswitch-agent", right?
>
> Correct. That package should install the openvswitch and other
> dependencies.
>
>
>  Tks,
> Thiago
>
>
> On 13 March 2013 00:58, Martinx - ジェームズ <thiagocmartinsc at gmail.com> wrote:
>
>>  Daneyon,
>>
>>   Thank you for your time! I'll check it!
>>
>>   I read that guide from Cisto once... Too complex.
>>
>>   I also, tried the following guides too, appears to be like the one
>> from Cisco:
>>
>>
>> https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/stable/GRE/OpenStack_Folsom_Install_Guide_WebVersion.rst
>>
>>   and:
>>
>> https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/GRE/2NICs/OpenStack_Folsom_Install_Guide_WebVersion.rst
>>
>>
>>   Anyway, at first, I do not want L3 or GRE. Only the most basic setup
>> (Flat / L2).
>>
>>   Do you know if my `controller+network node' server eth0 needs to be
>> promisc?
>>
>>  Tks!
>> Thiago
>>
>>
>> On 13 March 2013 00:49, Daneyon Hansen (danehans) <danehans at cisco.com>wrote:
>>
>>>
>>>  Make sure the quantum-dhcp and l3 agents are running and properly
>>> configured.  It sounds like either the q-dhcp agent is not functioning or
>>> connectivity between the dhcp agent and vm is not functioning.  If using
>>> GRE tunnels, test connectivity between the tunnel endpoints.  You should
>>> also see the IP's of your tunnel peers in ovs-vsctl show.  If your instance
>>> spawns successfully, console into it and manually assign an IP and ping the
>>> q-l3-agent and q-dhcp agent.  You can follow this guide for deploying
>>> Quantum with OpenvSwitch using GRE tunnels:
>>>
>>>
>>> http://docwiki.cisco.com/wiki/Cisco_OpenStack_Edition:_Folsom_Manual_Install
>>>
>>>  Regards,
>>> Daneyon Hansen
>>>
>>>   From: Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>>> Date: Tuesday, March 12, 2013 8:14 PM
>>> To: "openstack at lists.launchpad.net" <openstack at lists.launchpad.net>, "
>>> openstack-operators at lists.openstack.org" <
>>> openstack-operators at lists.openstack.org>
>>> Subject: Re: [Openstack-operators] Help with simplest Quantum setup
>>> possible...
>>>
>>>   Well,
>>>
>>>   Just for the record, I'll stick with Quatum + OpenvSwtich... Someone
>>> on IRC told me that it is the best way to go with Quantum.
>>>
>>>   I'm still needing help to set it up (Single Flat / multi=false, still
>>> the same simplest topology).
>>>
>>>   OpenvSwitch is already working, bridges `br-int' and `br-eth0'
>>> created...
>>>
>>>   My main problem, I think, is that my Instances doesn't get an IP
>>> (they supposed to be at 10.33.14.X/24).
>>>
>>>   Everything else seems to be working as expected, no apparent errors
>>> on the logs... quantum net-create / subnet-create worked...
>>>
>>>   I appreciate any help, tips or docs!
>>>
>>>  Best!
>>> Thiago
>>>
>>>
>>> On 12 March 2013 23:34, Martinx - ジェームズ <thiagocmartinsc at gmail.com>wrote:
>>>
>>>> Hi!
>>>>
>>>>   Sorry about the double posting... I need help!     :-P
>>>>
>>>>   I'm trying, without any kind of success, to deploy OpenStack with
>>>> Quantum on its simplest scenario, I think, which is `Single Flat' with
>>>> `Linux Bridge' plugin.
>>>>
>>>>   My topology is:
>>>>
>>>>   1 firewall with 2 ethX (eth0 public, eth1 10.32.14.1 and 10.33.14.1)
>>>>  1 controller with 1 eth0 (10.32.14.232/24 gateway 10.32.14.1)
>>>>  1 node with 1 eth0 (10.32.14.234/24 gateway 10.32.14.1)
>>>>
>>>>   Instances Network:
>>>>  10.33.14.0/24 (Instances gateway must be 10.33.14.1, same router of
>>>> the physical servers above, NOT its own host hypervisor).
>>>>
>>>>   I'm trying this:
>>>>
>>>>
>>>> http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html- doesn't work... Even enabling OpenvSwith (but I don't want it for now,
>>>> only Quantum instead of nova-network, with Linux Bridge for the sake of
>>>> simplicity).
>>>>
>>>>   The following guide help me a lot (with Nova Network everything is
>>>> fine): http://openstack-folsom-install-guide.readthedocs.org/en/latest/- I'm trying to follow it, by replacing nota-network instructions, for
>>>> Quantum instructions but, doesn't work...
>>>>
>>>>   Any docs or tips?
>>>>
>>>>   NOTE: I do not want any kind of NAT (like nova-network multi=true)
>>>> or `Floating IPs' within my Cloud Computing environment.
>>>>
>>>>  Thanks!
>>>> Thiago
>>>>
>>>
>>>
>>
>   _______________________________________________
> OpenStack-operators mailing list
> OpenStack-operators at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20130314/d6e60099/attachment.html>


More information about the OpenStack-operators mailing list