<div dir="ltr">Good day, <div><br></div><div>We have Ironic running and connected via VLANs to nearby machines. We want to extend this to other parts of our product development lab without extending VLANs. </div><div><br></div><div>Using DHCP relay, we would point to a single IP address to serve DHCP requests but I'm not entirely sure of the Neutron network/subnet configuration, nor which IP address should be used for the relay agent on the switch. </div><div><br></div><div>Is DHCP relay supported by Neutron? </div><div><br></div><div>My guess is to add a subnet in the provisioning network and point the relay agent to the linuxbridge interface's IP: </div><div>14: brq467f6775-be: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000<br>    link/ether e2:e9:09:7f:89:0b brd ff:ff:ff:ff:ff:ff<br>    inet <a href="http://10.10.0.1/16">10.10.0.1/16</a> scope global brq467f6775-be<br>       valid_lft forever preferred_lft forever<br>    inet6 fe80::5400:52ff:fe85:d33d/64 scope link <br>       valid_lft forever preferred_lft forever<br></div><div><br></div><div>Thank you, </div><div>Tom King</div></div>