DCN compute service goes down when a instance is scheduled to launch | wallaby | tripleo

Swogat Pradhan swogatpradhan22 at gmail.com
Tue Mar 21 04:06:08 UTC 2023


Update:
I uploaded an image directly to the dcn02 store, and it takes around 10,15
minutes to create a volume with image in dcn02.
The image size is 389 MB.

On Mon, Mar 20, 2023 at 10:26 PM Swogat Pradhan <swogatpradhan22 at gmail.com>
wrote:

> Hi Jhon,
> I checked in the ceph od dcn02, I can see the images created after
> importing from the central site.
> But launching an instance normally fails as it takes a long time for the
> volume to get created.
>
> When launching an instance from volume the instance is getting created
> properly without any errors.
>
> I tried to cache images in nova using
> https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/post_deployment/pre_cache_images.html
> but getting checksum failed error.
>
> With regards,
> Swogat Pradhan
>
> On Thu, Mar 16, 2023 at 5:24 PM John Fulton <johfulto at redhat.com> wrote:
>
>> On Wed, Mar 15, 2023 at 8:05 PM Swogat Pradhan
>> <swogatpradhan22 at gmail.com> wrote:
>> >
>> > Update: After restarting the nova services on the controller and
>> running the deploy script on the edge site, I was able to launch the VM
>> from volume.
>> >
>> > Right now the instance creation is failing as the block device creation
>> is stuck in creating state, it is taking more than 10 mins for the volume
>> to be created, whereas the image has already been imported to the edge
>> glance.
>>
>> Try following this document and making the same observations in your
>> environment for AZs and their local ceph cluster.
>>
>>
>> https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/features/distributed_multibackend_storage.html#confirm-images-may-be-copied-between-sites
>>
>> On a DCN site if you run a command like this:
>>
>> $ sudo cephadm shell --config /etc/ceph/dcn0.conf --keyring
>> /etc/ceph/dcn0.client.admin.keyring
>> $ rbd --cluster dcn0 -p volumes ls -l
>> NAME                                      SIZE  PARENT
>>                           FMT PROT LOCK
>> volume-28c6fc32-047b-4306-ad2d-de2be02716b7 8 GiB
>> images/8083c7e7-32d8-4f7a-b1da-0ed7884f1076 at snap   2      excl
>> $
>>
>> Then, you should see the parent of the volume is the image which is on
>> the same local ceph cluster.
>>
>> I wonder if something is misconfigured and thus you're encountering
>> the streaming behavior described here:
>>
>> Ideally all images should reside in the central Glance and be copied
>> to DCN sites before instances of those images are booted on DCN sites.
>> If an image is not copied to a DCN site before it is booted, then the
>> image will be streamed to the DCN site and then the image will boot as
>> an instance. This happens because Glance at the DCN site has access to
>> the images store at the Central ceph cluster. Though the booting of
>> the image will take time because it has not been copied in advance,
>> this is still preferable to failing to boot the image.
>>
>> You can also exec into the cinder container at the DCN site and
>> confirm it's using it's local ceph cluster.
>>
>>   John
>>
>> >
>> > I will try and create a new fresh image and test again then update.
>> >
>> > With regards,
>> > Swogat Pradhan
>> >
>> > On Wed, Mar 15, 2023 at 11:13 PM Swogat Pradhan <
>> swogatpradhan22 at gmail.com> wrote:
>> >>
>> >> Update:
>> >> In the hypervisor list the compute node state is showing down.
>> >>
>> >>
>> >> On Wed, Mar 15, 2023 at 11:11 PM Swogat Pradhan <
>> swogatpradhan22 at gmail.com> wrote:
>> >>>
>> >>> Hi Brendan,
>> >>> Now i have deployed another site where i have used 2 linux bonds
>> network template for both 3 compute nodes and 3 ceph nodes.
>> >>> The bonding options is set to mode=802.3ad (lacp=active).
>> >>> I used a cirros image to launch instance but the instance timed out
>> so i waited for the volume to be created.
>> >>> Once the volume was created i tried launching the instance from the
>> volume and still the instance is stuck in spawning state.
>> >>>
>> >>> Here is the nova-compute log:
>> >>>
>> >>> 2023-03-15 17:35:47.739 185437 INFO oslo.privsep.daemon [-] privsep
>> daemon starting
>> >>> 2023-03-15 17:35:47.744 185437 INFO oslo.privsep.daemon [-] privsep
>> process running with uid/gid: 0/0
>> >>> 2023-03-15 17:35:47.749 185437 INFO oslo.privsep.daemon [-] privsep
>> process running with capabilities (eff/prm/inh):
>> CAP_SYS_ADMIN/CAP_SYS_ADMIN/none
>> >>> 2023-03-15 17:35:47.749 185437 INFO oslo.privsep.daemon [-] privsep
>> daemon running as pid 185437
>> >>> 2023-03-15 17:35:47.974 8 WARNING
>> os_brick.initiator.connectors.nvmeof
>> [req-dbb11a9b-317e-4957-b141-f9e0bdf6a266 b240e3e89d99489284cd731e75f2a5db
>> 4160ce999a31485fa643aed0936dfef0 - default default] Process execution error
>> in _get_host_uuid: Unexpected error while running command.
>> >>> Command: blkid overlay -s UUID -o value
>> >>> Exit code: 2
>> >>> Stdout: ''
>> >>> Stderr: '': oslo_concurrency.processutils.ProcessExecutionError:
>> Unexpected error while running command.
>> >>> 2023-03-15 17:35:51.616 8 INFO nova.virt.libvirt.driver
>> [req-dbb11a9b-317e-4957-b141-f9e0bdf6a266 b240e3e89d99489284cd731e75f2a5db
>> 4160ce999a31485fa643aed0936dfef0 - default default] [instance:
>> 450b749c-a10a-4308-80a9-3b8020fee758] Creating image
>> >>>
>> >>> It is stuck in creating image, do i need to run the template
>> mentioned here ?:
>> https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/post_deployment/pre_cache_images.html
>> >>>
>> >>> The volume is already created and i do not understand why the
>> instance is stuck in spawning state.
>> >>>
>> >>> With regards,
>> >>> Swogat Pradhan
>> >>>
>> >>>
>> >>> On Sun, Mar 5, 2023 at 4:02 PM Brendan Shephard <bshephar at redhat.com>
>> wrote:
>> >>>>
>> >>>> Does your environment use different network interfaces for each of
>> the networks? Or does it have a bond with everything on it?
>> >>>>
>> >>>> One issue I have seen before is that when launching instances, there
>> is a lot of network traffic between nodes as the hypervisor needs to
>> download the image from Glance. Along with various other services sending
>> normal network traffic, it can be enough to cause issues if everything is
>> running over a single 1Gbe interface.
>> >>>>
>> >>>> I have seen the same situation in fact when using a single
>> active/backup bond on 1Gbe nics. It’s worth checking the network traffic
>> while you try to spawn the instance to see if you’re dropping packets. In
>> the situation I described, there were dropped packets which resulted in a
>> loss of communication between nova_compute and RMQ, so the node appeared
>> offline. You should also confirm that nova_compute is being disconnected in
>> the nova_compute logs if you tail them on the Hypervisor while spawning the
>> instance.
>> >>>>
>> >>>> In my case, changing from active/backup to LACP helped. So, based on
>> that experience, from my perspective, is certainly sounds like some kind of
>> network issue.
>> >>>>
>> >>>> Regards,
>> >>>>
>> >>>> Brendan Shephard
>> >>>> Senior Software Engineer
>> >>>> Red Hat Australia
>> >>>>
>> >>>>
>> >>>>
>> >>>> On 5 Mar 2023, at 6:47 am, Eugen Block <eblock at nde.ag> wrote:
>> >>>>
>> >>>> Hi,
>> >>>>
>> >>>> I tried to help someone with a similar issue some time ago in this
>> thread:
>> >>>>
>> https://serverfault.com/questions/1116771/openstack-oslo-messaging-exception-in-nova-conductor
>> >>>>
>> >>>> But apparently a neutron reinstallation fixed it for that user, not
>> sure if that could apply here. But is it possible that your nova and
>> neutron versions are different between central and edge site? Have you
>> restarted nova and neutron services on the compute nodes after
>> installation? Have you debug logs of nova-conductor and maybe nova-compute?
>> Maybe they can help narrow down the issue.
>> >>>> If there isn't any additional information in the debug logs I
>> probably would start "tearing down" rabbitmq. I didn't have to do that in a
>> production system yet so be careful. I can think of two routes:
>> >>>>
>> >>>> - Either remove queues, exchanges etc. while rabbit is running, this
>> will most likely impact client IO depending on your load. Check out the
>> rabbitmqctl commands.
>> >>>> - Or stop the rabbitmq cluster, remove the mnesia tables from all
>> nodes and restart rabbitmq so the exchanges, queues etc. rebuild.
>> >>>>
>> >>>> I can imagine that the failed reply "survives" while being
>> replicated across the rabbit nodes. But I don't really know the rabbit
>> internals too well, so maybe someone else can chime in here and give a
>> better advice.
>> >>>>
>> >>>> Regards,
>> >>>> Eugen
>> >>>>
>> >>>> Zitat von Swogat Pradhan <swogatpradhan22 at gmail.com>:
>> >>>>
>> >>>> Hi,
>> >>>> Can someone please help me out on this issue?
>> >>>>
>> >>>> With regards,
>> >>>> Swogat Pradhan
>> >>>>
>> >>>> On Thu, Mar 2, 2023 at 1:24 PM Swogat Pradhan <
>> swogatpradhan22 at gmail.com>
>> >>>> wrote:
>> >>>>
>> >>>> Hi
>> >>>> I don't see any major packet loss.
>> >>>> It seems the problem is somewhere in rabbitmq maybe but not due to
>> packet
>> >>>> loss.
>> >>>>
>> >>>> with regards,
>> >>>> Swogat Pradhan
>> >>>>
>> >>>> On Wed, Mar 1, 2023 at 3:34 PM Swogat Pradhan <
>> swogatpradhan22 at gmail.com>
>> >>>> wrote:
>> >>>>
>> >>>> Hi,
>> >>>> Yes the MTU is the same as the default '1500'.
>> >>>> Generally I haven't seen any packet loss, but never checked when
>> >>>> launching the instance.
>> >>>> I will check that and come back.
>> >>>> But everytime i launch an instance the instance gets stuck at
>> spawning
>> >>>> state and there the hypervisor becomes down, so not sure if packet
>> loss
>> >>>> causes this.
>> >>>>
>> >>>> With regards,
>> >>>> Swogat pradhan
>> >>>>
>> >>>> On Wed, Mar 1, 2023 at 3:30 PM Eugen Block <eblock at nde.ag> wrote:
>> >>>>
>> >>>> One more thing coming to mind is MTU size. Are they identical between
>> >>>> central and edge site? Do you see packet loss through the tunnel?
>> >>>>
>> >>>> Zitat von Swogat Pradhan <swogatpradhan22 at gmail.com>:
>> >>>>
>> >>>> > Hi Eugen,
>> >>>> > Request you to please add my email either on 'to' or 'cc' as i am
>> not
>> >>>> > getting email's from you.
>> >>>> > Coming to the issue:
>> >>>> >
>> >>>> > [root at overcloud-controller-no-ceph-3 /]# rabbitmqctl
>> list_policies -p
>> >>>> /
>> >>>> > Listing policies for vhost "/" ...
>> >>>> > vhost   name    pattern apply-to        definition      priority
>> >>>> > /       ha-all  ^(?!amq\.).*    queues
>> >>>> >
>> >>>>
>> {"ha-mode":"exactly","ha-params":2,"ha-promote-on-shutdown":"always"}   0
>> >>>> >
>> >>>> > I have the edge site compute nodes up, it only goes down when i am
>> >>>> trying
>> >>>> > to launch an instance and the instance comes to a spawning state
>> and
>> >>>> then
>> >>>> > gets stuck.
>> >>>> >
>> >>>> > I have a tunnel setup between the central and the edge sites.
>> >>>> >
>> >>>> > With regards,
>> >>>> > Swogat Pradhan
>> >>>> >
>> >>>> > On Tue, Feb 28, 2023 at 9:11 PM Swogat Pradhan <
>> >>>> swogatpradhan22 at gmail.com>
>> >>>> > wrote:
>> >>>> >
>> >>>> >> Hi Eugen,
>> >>>> >> For some reason i am not getting your email to me directly, i am
>> >>>> checking
>> >>>> >> the email digest and there i am able to find your reply.
>> >>>> >> Here is the log for download: https://we.tl/t-L8FEkGZFSq
>> >>>> >> Yes, these logs are from the time when the issue occurred.
>> >>>> >>
>> >>>> >> *Note: i am able to create vm's and perform other activities in
>> the
>> >>>> >> central site, only facing this issue in the edge site.*
>> >>>> >>
>> >>>> >> With regards,
>> >>>> >> Swogat Pradhan
>> >>>> >>
>> >>>> >> On Mon, Feb 27, 2023 at 5:12 PM Swogat Pradhan <
>> >>>> swogatpradhan22 at gmail.com>
>> >>>> >> wrote:
>> >>>> >>
>> >>>> >>> Hi Eugen,
>> >>>> >>> Thanks for your response.
>> >>>> >>> I have actually a 4 controller setup so here are the details:
>> >>>> >>>
>> >>>> >>> *PCS Status:*
>> >>>> >>>   * Container bundle set: rabbitmq-bundle [
>> >>>> >>> 172.25.201.68:8787/tripleomaster/openstack-rabbitmq:pcmklatest]:
>> >>>> >>>     * rabbitmq-bundle-0 (ocf::heartbeat:rabbitmq-cluster):
>> >>>> Started
>> >>>> >>> overcloud-controller-no-ceph-3
>> >>>> >>>     * rabbitmq-bundle-1 (ocf::heartbeat:rabbitmq-cluster):
>> >>>> Started
>> >>>> >>> overcloud-controller-2
>> >>>> >>>     * rabbitmq-bundle-2 (ocf::heartbeat:rabbitmq-cluster):
>> >>>> Started
>> >>>> >>> overcloud-controller-1
>> >>>> >>>     * rabbitmq-bundle-3 (ocf::heartbeat:rabbitmq-cluster):
>> >>>> Started
>> >>>> >>> overcloud-controller-0
>> >>>> >>>
>> >>>> >>> I have tried restarting the bundle multiple times but the issue
>> is
>> >>>> still
>> >>>> >>> present.
>> >>>> >>>
>> >>>> >>> *Cluster status:*
>> >>>> >>> [root at overcloud-controller-0 /]# rabbitmqctl cluster_status
>> >>>> >>> Cluster status of node
>> >>>> >>> rabbit at overcloud-controller-0.internalapi.bdxworld.com ...
>> >>>> >>> Basics
>> >>>> >>>
>> >>>> >>> Cluster name: rabbit at overcloud-controller-no-ceph-3.bdxworld.com
>> >>>> >>>
>> >>>> >>> Disk Nodes
>> >>>> >>>
>> >>>> >>> rabbit at overcloud-controller-0.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-1.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-2.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com
>> >>>> >>>
>> >>>> >>> Running Nodes
>> >>>> >>>
>> >>>> >>> rabbit at overcloud-controller-0.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-1.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-2.internalapi.bdxworld.com
>> >>>> >>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com
>> >>>> >>>
>> >>>> >>> Versions
>> >>>> >>>
>> >>>> >>> rabbit at overcloud-controller-0.internalapi.bdxworld.com: RabbitMQ
>> >>>> 3.8.3
>> >>>> >>> on Erlang 22.3.4.1
>> >>>> >>> rabbit at overcloud-controller-1.internalapi.bdxworld.com: RabbitMQ
>> >>>> 3.8.3
>> >>>> >>> on Erlang 22.3.4.1
>> >>>> >>> rabbit at overcloud-controller-2.internalapi.bdxworld.com: RabbitMQ
>> >>>> 3.8.3
>> >>>> >>> on Erlang 22.3.4.1
>> >>>> >>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com:
>> >>>> RabbitMQ
>> >>>> >>> 3.8.3 on Erlang 22.3.4.1
>> >>>> >>>
>> >>>> >>> Alarms
>> >>>> >>>
>> >>>> >>> (none)
>> >>>> >>>
>> >>>> >>> Network Partitions
>> >>>> >>>
>> >>>> >>> (none)
>> >>>> >>>
>> >>>> >>> Listeners
>> >>>> >>>
>> >>>> >>> Node: rabbit at overcloud-controller-0.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 25672, protocol: clustering, purpose: inter-node and
>> CLI
>> >>>> tool
>> >>>> >>> communication
>> >>>> >>> Node: rabbit at overcloud-controller-0.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> 172.25.201.212, port: 5672, protocol: amqp, purpose: AMQP 0-9-1
>> >>>> >>> and AMQP 1.0
>> >>>> >>> Node: rabbit at overcloud-controller-0.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 15672, protocol: http, purpose: HTTP API
>> >>>> >>> Node: rabbit at overcloud-controller-1.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 25672, protocol: clustering, purpose: inter-node and
>> CLI
>> >>>> tool
>> >>>> >>> communication
>> >>>> >>> Node: rabbit at overcloud-controller-1.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> 172.25.201.205, port: 5672, protocol: amqp, purpose: AMQP 0-9-1
>> >>>> >>> and AMQP 1.0
>> >>>> >>> Node: rabbit at overcloud-controller-1.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 15672, protocol: http, purpose: HTTP API
>> >>>> >>> Node: rabbit at overcloud-controller-2.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 25672, protocol: clustering, purpose: inter-node and
>> CLI
>> >>>> tool
>> >>>> >>> communication
>> >>>> >>> Node: rabbit at overcloud-controller-2.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> 172.25.201.201, port: 5672, protocol: amqp, purpose: AMQP 0-9-1
>> >>>> >>> and AMQP 1.0
>> >>>> >>> Node: rabbit at overcloud-controller-2.internalapi.bdxworld.com,
>> >>>> interface:
>> >>>> >>> [::], port: 15672, protocol: http, purpose: HTTP API
>> >>>> >>> Node:
>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com
>> >>>> ,
>> >>>> >>> interface: [::], port: 25672, protocol: clustering, purpose:
>> >>>> inter-node and
>> >>>> >>> CLI tool communication
>> >>>> >>> Node:
>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com
>> >>>> ,
>> >>>> >>> interface: 172.25.201.209, port: 5672, protocol: amqp, purpose:
>> AMQP
>> >>>> 0-9-1
>> >>>> >>> and AMQP 1.0
>> >>>> >>> Node:
>> rabbit at overcloud-controller-no-ceph-3.internalapi.bdxworld.com
>> >>>> ,
>> >>>> >>> interface: [::], port: 15672, protocol: http, purpose: HTTP API
>> >>>> >>>
>> >>>> >>> Feature flags
>> >>>> >>>
>> >>>> >>> Flag: drop_unroutable_metric, state: enabled
>> >>>> >>> Flag: empty_basic_get_metric, state: enabled
>> >>>> >>> Flag: implicit_default_bindings, state: enabled
>> >>>> >>> Flag: quorum_queue, state: enabled
>> >>>> >>> Flag: virtual_host_metadata, state: enabled
>> >>>> >>>
>> >>>> >>> *Logs:*
>> >>>> >>> *(Attached)*
>> >>>> >>>
>> >>>> >>> With regards,
>> >>>> >>> Swogat Pradhan
>> >>>> >>>
>> >>>> >>> On Sun, Feb 26, 2023 at 2:34 PM Swogat Pradhan <
>> >>>> swogatpradhan22 at gmail.com>
>> >>>> >>> wrote:
>> >>>> >>>
>> >>>> >>>> Hi,
>> >>>> >>>> Please find the nova conductor as well as nova api log.
>> >>>> >>>>
>> >>>> >>>> nova-conuctor:
>> >>>> >>>>
>> >>>> >>>> 2023-02-26 08:45:01.108 31 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -]
>> >>>> >>>> reply_349bcb075f8c49329435a0f884b33066 doesn't exist, drop
>> reply to
>> >>>> >>>> 16152921c1eb45c2b1f562087140168b
>> >>>> >>>> 2023-02-26 08:45:02.144 26 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-7b43c4e5-0475-4598-92c0-fcacb51d9813 - - - - -]
>> >>>> >>>> reply_276049ec36a84486a8a406911d9802f4 doesn't exist, drop
>> reply to
>> >>>> >>>> 83dbe5f567a940b698acfe986f6194fa
>> >>>> >>>> 2023-02-26 08:45:02.314 32 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-7b43c4e5-0475-4598-92c0-fcacb51d9813 - - - - -]
>> >>>> >>>> reply_276049ec36a84486a8a406911d9802f4 doesn't exist, drop
>> reply to
>> >>>> >>>> f3bfd7f65bd542b18d84cea3033abb43:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:45:02.316 32 ERROR
>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-7b43c4e5-0475-4598-92c0-fcacb51d9813 - - - - -] The reply
>> >>>> >>>> f3bfd7f65bd542b18d84cea3033abb43 failed to send after 60 seconds
>> >>>> due to a
>> >>>> >>>> missing queue (reply_276049ec36a84486a8a406911d9802f4).
>> >>>> Abandoning...:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:48:01.282 35 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -]
>> >>>> >>>> reply_349bcb075f8c49329435a0f884b33066 doesn't exist, drop
>> reply to
>> >>>> >>>> d4b9180f91a94f9a82c3c9c4b7595566:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:48:01.284 35 ERROR
>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -] The reply
>> >>>> >>>> d4b9180f91a94f9a82c3c9c4b7595566 failed to send after 60 seconds
>> >>>> due to a
>> >>>> >>>> missing queue (reply_349bcb075f8c49329435a0f884b33066).
>> >>>> Abandoning...:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:49:01.303 33 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -]
>> >>>> >>>> reply_349bcb075f8c49329435a0f884b33066 doesn't exist, drop
>> reply to
>> >>>> >>>> 897911a234a445d8a0d8af02ece40f6f:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:49:01.304 33 ERROR
>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -] The reply
>> >>>> >>>> 897911a234a445d8a0d8af02ece40f6f failed to send after 60 seconds
>> >>>> due to a
>> >>>> >>>> missing queue (reply_349bcb075f8c49329435a0f884b33066).
>> >>>> Abandoning...:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:49:52.254 31 WARNING nova.cache_utils
>> >>>> >>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>> 4160ce999a31485fa643aed0936dfef0 - default default] Cache
>> enabled
>> >>>> with
>> >>>> >>>> backend dogpile.cache.null.
>> >>>> >>>> 2023-02-26 08:50:01.264 27 WARNING
>> >>>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -]
>> >>>> >>>> reply_349bcb075f8c49329435a0f884b33066 doesn't exist, drop
>> reply to
>> >>>> >>>> 8f723ceb10c3472db9a9f324861df2bb:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>> 2023-02-26 08:50:01.266 27 ERROR
>> oslo_messaging._drivers.amqpdriver
>> >>>> >>>> [req-caefe26d-153a-4dfd-9ea6-bc5ca0d46679 - - - - -] The reply
>> >>>> >>>> 8f723ceb10c3472db9a9f324861df2bb failed to send after 60 seconds
>> >>>> due to a
>> >>>> >>>> missing queue (reply_349bcb075f8c49329435a0f884b33066).
>> >>>> Abandoning...:
>> >>>> >>>> oslo_messaging.exceptions.MessageUndeliverable
>> >>>> >>>>
>> >>>> >>>> With regards,
>> >>>> >>>> Swogat Pradhan
>> >>>> >>>>
>> >>>> >>>> On Sun, Feb 26, 2023 at 2:26 PM Swogat Pradhan <
>> >>>> >>>> swogatpradhan22 at gmail.com> wrote:
>> >>>> >>>>
>> >>>> >>>>> Hi,
>> >>>> >>>>> I currently have 3 compute nodes on edge site1 where i am
>> trying to
>> >>>> >>>>> launch vm's.
>> >>>> >>>>> When the VM is in spawning state the node goes down (openstack
>> >>>> compute
>> >>>> >>>>> service list), the node comes backup when i restart the nova
>> >>>> compute
>> >>>> >>>>> service but then the launch of the vm fails.
>> >>>> >>>>>
>> >>>> >>>>> nova-compute.log
>> >>>> >>>>>
>> >>>> >>>>> 2023-02-26 08:15:51.808 7 INFO nova.compute.manager
>> >>>> >>>>> [req-bc0f5f2e-53fc-4dae-b1da-82f1f972d617 - - - - -] Running
>> >>>> >>>>> instance usage
>> >>>> >>>>> audit for host dcn01-hci-0.bdxworld.com from 2023-02-26
>> 07:00:00
>> >>>> to
>> >>>> >>>>> 2023-02-26 08:00:00. 0 instances.
>> >>>> >>>>> 2023-02-26 08:49:52.813 7 INFO nova.compute.claims
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] [instance:
>> >>>> >>>>> 0c62c1ef-9010-417d-a05f-4db77e901600] Claim successful on node
>> >>>> >>>>> dcn01-hci-0.bdxworld.com
>> >>>> >>>>> 2023-02-26 08:49:54.225 7 INFO nova.virt.libvirt.driver
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] [instance:
>> >>>> >>>>> 0c62c1ef-9010-417d-a05f-4db77e901600] Ignoring supplied device
>> >>>> name:
>> >>>> >>>>> /dev/vda. Libvirt can't honour user-supplied dev names
>> >>>> >>>>> 2023-02-26 08:49:54.398 7 INFO nova.virt.block_device
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] [instance:
>> >>>> >>>>> 0c62c1ef-9010-417d-a05f-4db77e901600] Booting with volume
>> >>>> >>>>> c4bd7885-5973-4860-bbe6-7a2f726baeee at /dev/vda
>> >>>> >>>>> 2023-02-26 08:49:55.216 7 WARNING nova.cache_utils
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] Cache
>> enabled
>> >>>> with
>> >>>> >>>>> backend dogpile.cache.null.
>> >>>> >>>>> 2023-02-26 08:49:55.283 7 INFO oslo.privsep.daemon
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] Running
>> >>>> >>>>> privsep helper:
>> >>>> >>>>> ['sudo', 'nova-rootwrap', '/etc/nova/rootwrap.conf',
>> >>>> 'privsep-helper',
>> >>>> >>>>> '--config-file', '/etc/nova/nova.conf', '--config-file',
>> >>>> >>>>> '/etc/nova/nova-compute.conf', '--privsep_context',
>> >>>> >>>>> 'os_brick.privileged.default', '--privsep_sock_path',
>> >>>> >>>>> '/tmp/tmpin40tah6/privsep.sock']
>> >>>> >>>>> 2023-02-26 08:49:55.791 7 INFO oslo.privsep.daemon
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] Spawned new
>> >>>> privsep
>> >>>> >>>>> daemon via rootwrap
>> >>>> >>>>> 2023-02-26 08:49:55.717 2647 INFO oslo.privsep.daemon [-]
>> privsep
>> >>>> >>>>> daemon starting
>> >>>> >>>>> 2023-02-26 08:49:55.722 2647 INFO oslo.privsep.daemon [-]
>> privsep
>> >>>> >>>>> process running with uid/gid: 0/0
>> >>>> >>>>> 2023-02-26 08:49:55.726 2647 INFO oslo.privsep.daemon [-]
>> privsep
>> >>>> >>>>> process running with capabilities (eff/prm/inh):
>> >>>> >>>>> CAP_SYS_ADMIN/CAP_SYS_ADMIN/none
>> >>>> >>>>> 2023-02-26 08:49:55.726 2647 INFO oslo.privsep.daemon [-]
>> privsep
>> >>>> >>>>> daemon running as pid 2647
>> >>>> >>>>> 2023-02-26 08:49:55.956 7 WARNING
>> >>>> os_brick.initiator.connectors.nvmeof
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] Process
>> >>>> >>>>> execution error
>> >>>> >>>>> in _get_host_uuid: Unexpected error while running command.
>> >>>> >>>>> Command: blkid overlay -s UUID -o value
>> >>>> >>>>> Exit code: 2
>> >>>> >>>>> Stdout: ''
>> >>>> >>>>> Stderr: '':
>> oslo_concurrency.processutils.ProcessExecutionError:
>> >>>> >>>>> Unexpected error while running command.
>> >>>> >>>>> 2023-02-26 08:49:58.247 7 INFO nova.virt.libvirt.driver
>> >>>> >>>>> [req-3a1547ea-326f-4dd0-9127-7f4a4bdf1e45
>> >>>> >>>>> b240e3e89d99489284cd731e75f2a5db
>> >>>> >>>>> 4160ce999a31485fa643aed0936dfef0 - default default] [instance:
>> >>>> >>>>> 0c62c1ef-9010-417d-a05f-4db77e901600] Creating image
>> >>>> >>>>>
>> >>>> >>>>> Is there a way to solve this issue?
>> >>>> >>>>>
>> >>>> >>>>>
>> >>>> >>>>> With regards,
>> >>>> >>>>>
>> >>>> >>>>> Swogat Pradhan
>> >>>> >>>>>
>> >>>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.openstack.org/pipermail/openstack-discuss/attachments/20230321/2ef0fac7/attachment-0001.htm>


More information about the openstack-discuss mailing list