Wallaby Magnum Issue

Karera Tony tonykarera at gmail.com
Thu Aug 26 06:30:29 UTC 2021


Here is the beginning of the Log

Starting to run kube-apiserver-to-kubelet-role
+ echo 'Waiting for Kubernetes API...'
Waiting for Kubernetes API...
++ kubectl get --raw=/healthz
The connection to the server localhost:8080 was refused - did you specify
the right host or port?
+ '[' ok = '' ']'


Regards

Tony Karera




On Thu, Aug 26, 2021 at 7:53 AM Bharat Kunwar <bharat at stackhpc.com> wrote:

> I assume these are from the master nodes? Can you share the logs shortly
> after creation rather than when it times out? I think there is some missing
> logs from the top.
>
> Sent from my iPhone
>
> On 26 Aug 2021, at 06:14, Karera Tony <tonykarera at gmail.com> wrote:
>
> 
> Hello Guys,
>
> Attached are the two logs from the /var/log/heat-config/heat-config-script
> directory
> Regards
>
> Tony Karera
>
>
>
>
> On Thu, Aug 26, 2021 at 5:59 AM Karera Tony <tonykarera at gmail.com> wrote:
>
>> Dear Sir,
>>
>> You are right.
>>
>> I am getting this error
>>
>> kubectl get --raw=/healthz
>> The connection to the server localhost:8080 was refused - did you specify
>> the right host or port?
>>
>>
>> Regards
>>
>> Tony Karera
>>
>>
>>
>>
>> On Wed, Aug 25, 2021 at 10:55 PM Bharat Kunwar <bharat at stackhpc.com>
>> wrote:
>>
>>> I’d check the logs under /var/log/heat-config.
>>>
>>> Sent from my iPhone
>>>
>>> On 25 Aug 2021, at 19:39, Karera Tony <tonykarera at gmail.com> wrote:
>>>
>>> 
>>> DeaR Ammad,
>>>
>>> I was able to make the communication work and the Worker nodes were
>>> created as well but the cluster failed.
>>>
>>> I logged in to the master node and there was no error but below are the
>>> error when I run systemctl status heat-container-agent on the worker noed.
>>>
>>> Aug 25 17:52:24 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:52:55 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:53:26 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:53:57 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:54:28 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:54:59 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:55:29 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:56:00 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:56:31 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Aug 25 17:57:02 cluster1-fmkpva3nozf7-node-0 podman[2268]:
>>> /var/lib/os-collect-config/local-data not found. Skipping
>>> Regards
>>>
>>> Tony Karera
>>>
>>>
>>>
>>>
>>> On Wed, Aug 25, 2021 at 10:38 AM Ammad Syed <syedammad83 at gmail.com>
>>> wrote:
>>>
>>>> Yes, keystone, Heat, Barbicane and magnum public endpoints must be
>>>> reachable from master and worker nodes.
>>>>
>>>> You can use below guide for the reference as well.
>>>>
>>>>
>>>> https://www.server-world.info/en/note?os=Ubuntu_20.04&p=openstack_victoria4&f=11
>>>>
>>>> Ammad
>>>>
>>>> On Wed, Aug 25, 2021 at 12:08 PM Karera Tony <tonykarera at gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Ammad,
>>>>>
>>>>> I have deployed using the given image but I think there is an issue
>>>>> with keystone as per the screen shot below when I checked the master node's
>>>>> heat-container-agent status
>>>>>
>>>>> <image.png>
>>>>>
>>>>> Regards
>>>>>
>>>>> Tony Karera
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Aug 25, 2021 at 8:28 AM Karera Tony <tonykarera at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Ammad,
>>>>>>
>>>>>> I actually first used that one and it was also getting stuck.
>>>>>>
>>>>>> I will try this one again and update you with the Logs though.
>>>>>>
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Tony Karera
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 25, 2021 at 8:25 AM Ammad Syed <syedammad83 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> It seems from the logs that you are using fedora atomic. Can you try
>>>>>>> with FCOS 32 image.
>>>>>>>
>>>>>>>
>>>>>>> https://builds.coreos.fedoraproject.org/prod/streams/stable/builds/32.20201004.3.0/x86_64/fedora-coreos-32.20201004.3.0-openstack.x86_64.qcow2.xz
>>>>>>>
>>>>>>> Ammad
>>>>>>>
>>>>>>> On Wed, Aug 25, 2021 at 11:20 AM Karera Tony <tonykarera at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Sir,
>>>>>>>>
>>>>>>>> Attached is the Log file
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Tony Karera
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 25, 2021 at 7:31 AM Ammad Syed <syedammad83 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Karera,
>>>>>>>>>
>>>>>>>>> Can you share us the full log file.
>>>>>>>>>
>>>>>>>>> Ammad
>>>>>>>>>
>>>>>>>>> On Wed, Aug 25, 2021 at 9:42 AM Karera Tony <tonykarera at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hello Guys,
>>>>>>>>>>
>>>>>>>>>> Thanks a lot for the help but unfortunately I dont see much
>>>>>>>>>> information in the log file indicating a failure apart from the log that
>>>>>>>>>> keeps appearing.
>>>>>>>>>>
>>>>>>>>>> <image.png>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Regards
>>>>>>>>>>
>>>>>>>>>> Tony Karera
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <
>>>>>>>>>> mnaser at vexxhost.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Also check out /var/log/cloud-init.log :)
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <
>>>>>>>>>>> syedammad83 at gmail.com> wrote:
>>>>>>>>>>> >
>>>>>>>>>>> > Then check journalctl -xe or status of heat agent service
>>>>>>>>>>> status.
>>>>>>>>>>> >
>>>>>>>>>>> >
>>>>>>>>>>> > Ammad
>>>>>>>>>>> > On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <
>>>>>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>>>>>> >>
>>>>>>>>>>> >> Hello Ammad,
>>>>>>>>>>> >>
>>>>>>>>>>> >> There is no directory or log relevant to heat in the /var/log
>>>>>>>>>>> directory
>>>>>>>>>>> >>
>>>>>>>>>>> >> Regards
>>>>>>>>>>> >>
>>>>>>>>>>> >> Tony Karera
>>>>>>>>>>> >>
>>>>>>>>>>> >>
>>>>>>>>>>> >>
>>>>>>>>>>> >>
>>>>>>>>>>> >> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <
>>>>>>>>>>> syedammad83 at gmail.com> wrote:
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> Hi Karera,
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> Login to master node and check the logs of heat agent in var
>>>>>>>>>>> log. There must be something the cluster is stucking somewhere in creating.
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> Ammad
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <
>>>>>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> Hello Ammad,
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> I had done as explained and it worked upto a certain point.
>>>>>>>>>>> The master node was created but the cluster remained in Creation in
>>>>>>>>>>> progress for over an hour and failed with error below
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> Stack Faults
>>>>>>>>>>> >>>> as follows:
>>>>>>>>>>> >>>> default-master
>>>>>>>>>>> >>>> Timed out
>>>>>>>>>>> >>>> default-worker
>>>>>>>>>>> >>>> Timed out
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> Regards
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> Tony Karera
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>>
>>>>>>>>>>> >>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <
>>>>>>>>>>> syedammad83 at gmail.com> wrote:
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> Hi Tony,
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> You can try by creating your private vxlan network prior
>>>>>>>>>>> to deployment of cluster and explicitly create your cluster in vxlan
>>>>>>>>>>> network.
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> --fixed-network private --fixed-subnet private-subnet
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> You can specify above while creating a cluster.
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> Ammad
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <
>>>>>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>> Hello MOhamed,
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>> I think the Kubernetes cluster is ok but it when I deploy
>>>>>>>>>>> it, It creates a fixed network using vlan which I am not using for internal
>>>>>>>>>>> networks.
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>> When I create a a vxlan Network and use it in the cluster
>>>>>>>>>>> creation, It fails. Is there a trick around this ?
>>>>>>>>>>> >>>>>> Regards
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>> Tony Karera
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>>
>>>>>>>>>>> >>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <
>>>>>>>>>>> feilong at catalyst.net.nz> wrote:
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> Oooh, are you using Swarm? I don't think that driver is
>>>>>>>>>>> well maintained. I didn't see any interest in the last 4 years since I
>>>>>>>>>>> involved in the Magnum project. If there is no specific reason, I would
>>>>>>>>>>> suggest go for k8s.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> Please keep replies on list so others can help too.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> I don’t know how well tested the Swarm driver is at this
>>>>>>>>>>> point. I believe most Magnum users are using it for Kubernetes only.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <
>>>>>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> Hello Naser,
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> Please check below.
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> openstack coe cluster template create
>>>>>>>>>>> swarm-cluster-template1 \
>>>>>>>>>>> >>>>>>>>                      --image fedora-atomic-latest \
>>>>>>>>>>> >>>>>>>>                      --external-network External_1700\
>>>>>>>>>>> >>>>>>>>                      --dns-nameserver 8.8.8.8 \
>>>>>>>>>>> >>>>>>>>                      --master-flavor m1.small \
>>>>>>>>>>> >>>>>>>>                      --flavor m1.small \
>>>>>>>>>>> >>>>>>>>                      --coe swarm
>>>>>>>>>>> >>>>>>>> openstack coe cluster create swarm-cluster \
>>>>>>>>>>> >>>>>>>>                         --cluster-template
>>>>>>>>>>> swarm-cluster-template \
>>>>>>>>>>> >>>>>>>>                         --master-count 1 \
>>>>>>>>>>> >>>>>>>>                         --node-count 2 \
>>>>>>>>>>> >>>>>>>>                         --keypair Newkey
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> Regards
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> Tony Karera
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>>
>>>>>>>>>>> >>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <
>>>>>>>>>>> mnaser at vexxhost.com> wrote:
>>>>>>>>>>> >>>>>>>>>
>>>>>>>>>>> >>>>>>>>> What does your cluster template and cluster create
>>>>>>>>>>> command look like?
>>>>>>>>>>> >>>>>>>>>
>>>>>>>>>>> >>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <
>>>>>>>>>>> tonykarera at gmail.com> wrote:
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> Hello Wang,
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> Thanks for the feedback.
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> Unfortunately Octavia is not deployed in my
>>>>>>>>>>> environment (at least not yet) and LB is not enabled on either the cluster
>>>>>>>>>>> template or the cluster itself.
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> Regards
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> Tony Karera
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <
>>>>>>>>>>> feilong at catalyst.net.nz> wrote:
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Hi Karera,
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> It's probably a bug. If you do have Octavia
>>>>>>>>>>> deployed, can you try to not disable the LB and see how it goes?
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Hello Team,
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled
>>>>>>>>>>> Magum, however when I create a cluster I get the error below.
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Status Reason
>>>>>>>>>>> >>>>>>>>>>> ERROR: Property error: :
>>>>>>>>>>> resources.api_lb.properties: : Property allowed_cidrs not assigned
>>>>>>>>>>> >>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I
>>>>>>>>>>> disabled load balancer while creating the cluster.
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Regards
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Tony Karera
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> --
>>>>>>>>>>> >>>>>>>>>>> Cheers & Best regards,
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> >>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>>>> >>>>>>>>>>> Head of Research & Development
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Catalyst Cloud
>>>>>>>>>>> >>>>>>>>>>> Aotearoa's own
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>>>> >>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New
>>>>>>>>>>> Zealand
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> >>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for
>>>>>>>>>>> the named recipients only.
>>>>>>>>>>> >>>>>>>>>>> It may contain privileged, confidential or copyright
>>>>>>>>>>> information. If you are
>>>>>>>>>>> >>>>>>>>>>> not the named recipient, any use, reliance upon,
>>>>>>>>>>> disclosure or copying of this
>>>>>>>>>>> >>>>>>>>>>> email or its attachments is unauthorised. If you
>>>>>>>>>>> have received this email in
>>>>>>>>>>> >>>>>>>>>>> error, please reply via email or call +64 21 0832
>>>>>>>>>>> 6348.
>>>>>>>>>>> >>>>>>>>>>>
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> >>>>>>>>>
>>>>>>>>>>> >>>>>>>>> --
>>>>>>>>>>> >>>>>>>>> Mohammed Naser
>>>>>>>>>>> >>>>>>>>> VEXXHOST, Inc.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> --
>>>>>>>>>>> >>>>>>> Mohammed Naser
>>>>>>>>>>> >>>>>>> VEXXHOST, Inc.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> --
>>>>>>>>>>> >>>>>>> Cheers & Best regards,
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> >>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>>>>> >>>>>>> Head of Research & Development
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> Catalyst Cloud
>>>>>>>>>>> >>>>>>> Aotearoa's own
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>>>>> >>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> >>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the
>>>>>>>>>>> named recipients only.
>>>>>>>>>>> >>>>>>> It may contain privileged, confidential or copyright
>>>>>>>>>>> information. If you are
>>>>>>>>>>> >>>>>>> not the named recipient, any use, reliance upon,
>>>>>>>>>>> disclosure or copying of this
>>>>>>>>>>> >>>>>>> email or its attachments is unauthorised. If you have
>>>>>>>>>>> received this email in
>>>>>>>>>>> >>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>>>>> >>>>>>>
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> --
>>>>>>>>>>> >>>>> Regards,
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>>
>>>>>>>>>>> >>>>> Syed Ammad Ali
>>>>>>>>>>> >>>
>>>>>>>>>>> >>>
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> --
>>>>>>>>>>> >>> Regards,
>>>>>>>>>>> >>>
>>>>>>>>>>> >>>
>>>>>>>>>>> >>> Syed Ammad Ali
>>>>>>>>>>> >
>>>>>>>>>>> > --
>>>>>>>>>>> > Regards,
>>>>>>>>>>> >
>>>>>>>>>>> >
>>>>>>>>>>> > Syed Ammad Ali
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Mohammed Naser
>>>>>>>>>>> VEXXHOST, Inc.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Syed Ammad Ali
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>> Syed Ammad Ali
>>>>>>>
>>>>>>
>>>>
>>>> --
>>>> Regards,
>>>>
>>>>
>>>> Syed Ammad Ali
>>>>
>>>
> <29a37aff-f1f6-46b3-8541-887491c6cfe8-k8s-cluster3-dcu52bgzpbuu-kube_masters-ocfrn2ikpcgd-0-32tmkqgdq7wl-master_config-gihyfv3wlyzd.log>
>
> <6fca39b1-8eda-4786-8424-e5b04434cce7-k8s-cluster3-dcu52bgzpbuu-kube_cluster_config-aht4it6p7wfk.log>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210826/00cf46b0/attachment-0001.html>


More information about the openstack-discuss mailing list