Open Stack

Hello Guys,

Thanks a lot for the help but unfortunately I dont see much information in
the log file indicating a failure apart from the log that keeps appearing.

[image: image.png]

Regards

Tony Karera




On Tue, Aug 24, 2021 at 8:12 PM Mohammed Naser <mnaser at vexxhost.com> wrote:

> Also check out /var/log/cloud-init.log :)
>
> On Tue, Aug 24, 2021 at 1:39 PM Ammad Syed <syedammad83 at gmail.com> wrote:
> >
> > Then check journalctl -xe or status of heat agent service status.
> >
> >
> > Ammad
> > On Tue, Aug 24, 2021 at 10:36 PM Karera Tony <tonykarera at gmail.com>
> wrote:
> >>
> >> Hello Ammad,
> >>
> >> There is no directory or log relevant to heat in the /var/log directory
> >>
> >> Regards
> >>
> >> Tony Karera
> >>
> >>
> >>
> >>
> >> On Tue, Aug 24, 2021 at 12:43 PM Ammad Syed <syedammad83 at gmail.com>
> wrote:
> >>>
> >>> Hi Karera,
> >>>
> >>> Login to master node and check the logs of heat agent in var log.
> There must be something the cluster is stucking somewhere in creating.
> >>>
> >>> Ammad
> >>>
> >>> On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com>
> wrote:
> >>>>
> >>>> Hello Ammad,
> >>>>
> >>>> I had done as explained and it worked upto a certain point. The
> master node was created but the cluster remained in Creation in progress
> for over an hour and failed with error below
> >>>>
> >>>> Stack Faults
> >>>> as follows:
> >>>> default-master
> >>>> Timed out
> >>>> default-worker
> >>>> Timed out
> >>>>
> >>>>
> >>>> Regards
> >>>>
> >>>> Tony Karera
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com>
> wrote:
> >>>>>
> >>>>> Hi Tony,
> >>>>>
> >>>>> You can try by creating your private vxlan network prior to
> deployment of cluster and explicitly create your cluster in vxlan network.
> >>>>>
> >>>>> --fixed-network private --fixed-subnet private-subnet
> >>>>>
> >>>>> You can specify above while creating a cluster.
> >>>>>
> >>>>> Ammad
> >>>>>
> >>>>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com>
> wrote:
> >>>>>>
> >>>>>> Hello MOhamed,
> >>>>>>
> >>>>>> I think the Kubernetes cluster is ok but it when I deploy it, It
> creates a fixed network using vlan which I am not using for internal
> networks.
> >>>>>>
> >>>>>> When I create a a vxlan Network and use it in the cluster creation,
> It fails. Is there a trick around this ?
> >>>>>> Regards
> >>>>>>
> >>>>>> Tony Karera
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz>
> wrote:
> >>>>>>>
> >>>>>>> Oooh, are you using Swarm? I don't think that driver is well
> maintained. I didn't see any interest in the last 4 years since I involved
> in the Magnum project. If there is no specific reason, I would suggest go
> for k8s.
> >>>>>>>
> >>>>>>>
> >>>>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
> >>>>>>>
> >>>>>>> Please keep replies on list so others can help too.
> >>>>>>>
> >>>>>>> I don’t know how well tested the Swarm driver is at this point. I
> believe most Magnum users are using it for Kubernetes only.
> >>>>>>>
> >>>>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera at gmail.com>
> wrote:
> >>>>>>>>
> >>>>>>>> Hello Naser,
> >>>>>>>>
> >>>>>>>> Please check below.
> >>>>>>>>
> >>>>>>>> openstack coe cluster template create swarm-cluster-template1 \
> >>>>>>>>                      --image fedora-atomic-latest \
> >>>>>>>>                      --external-network External_1700\
> >>>>>>>>                      --dns-nameserver 8.8.8.8 \
> >>>>>>>>                      --master-flavor m1.small \
> >>>>>>>>                      --flavor m1.small \
> >>>>>>>>                      --coe swarm
> >>>>>>>> openstack coe cluster create swarm-cluster \
> >>>>>>>>                         --cluster-template swarm-cluster-template
> \
> >>>>>>>>                         --master-count 1 \
> >>>>>>>>                         --node-count 2 \
> >>>>>>>>                         --keypair Newkey
> >>>>>>>>
> >>>>>>>> Regards
> >>>>>>>>
> >>>>>>>> Tony Karera
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <
> mnaser at vexxhost.com> wrote:
> >>>>>>>>>
> >>>>>>>>> What does your cluster template and cluster create command look
> like?
> >>>>>>>>>
> >>>>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <
> tonykarera at gmail.com> wrote:
> >>>>>>>>>>
> >>>>>>>>>> Hello Wang,
> >>>>>>>>>>
> >>>>>>>>>> Thanks for the feedback.
> >>>>>>>>>>
> >>>>>>>>>> Unfortunately Octavia is not deployed in my environment (at
> least not yet) and LB is not enabled on either the cluster template or the
> cluster itself.
> >>>>>>>>>>
> >>>>>>>>>> Regards
> >>>>>>>>>>
> >>>>>>>>>> Tony Karera
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <
> feilong at catalyst.net.nz> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> Hi Karera,
> >>>>>>>>>>>
> >>>>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you
> try to not disable the LB and see how it goes?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> Hello Team,
> >>>>>>>>>>>
> >>>>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum,
> however when I create a cluster I get the error below.
> >>>>>>>>>>>
> >>>>>>>>>>> Status Reason
> >>>>>>>>>>> ERROR: Property error: : resources.api_lb.properties: :
> Property allowed_cidrs not assigned
> >>>>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled
> load balancer while creating the cluster.
> >>>>>>>>>>>
> >>>>>>>>>>> Regards
> >>>>>>>>>>>
> >>>>>>>>>>> Tony Karera
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> --
> >>>>>>>>>>> Cheers & Best regards,
> >>>>>>>>>>>
> ------------------------------------------------------------------------------
> >>>>>>>>>>> Feilong Wang (王飞龙) (he/him)
> >>>>>>>>>>> Head of Research & Development
> >>>>>>>>>>>
> >>>>>>>>>>> Catalyst Cloud
> >>>>>>>>>>> Aotearoa's own
> >>>>>>>>>>>
> >>>>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
> >>>>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
> >>>>>>>>>>>
> >>>>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named
> recipients only.
> >>>>>>>>>>> It may contain privileged, confidential or copyright
> information. If you are
> >>>>>>>>>>> not the named recipient, any use, reliance upon, disclosure or
> copying of this
> >>>>>>>>>>> email or its attachments is unauthorised. If you have received
> this email in
> >>>>>>>>>>> error, please reply via email or call +64 21 0832 6348.
> >>>>>>>>>>>
> ------------------------------------------------------------------------------
> >>>>>>>>>
> >>>>>>>>> --
> >>>>>>>>> Mohammed Naser
> >>>>>>>>> VEXXHOST, Inc.
> >>>>>>>
> >>>>>>> --
> >>>>>>> Mohammed Naser
> >>>>>>> VEXXHOST, Inc.
> >>>>>>>
> >>>>>>> --
> >>>>>>> Cheers & Best regards,
> >>>>>>>
> ------------------------------------------------------------------------------
> >>>>>>> Feilong Wang (王飞龙) (he/him)
> >>>>>>> Head of Research & Development
> >>>>>>>
> >>>>>>> Catalyst Cloud
> >>>>>>> Aotearoa's own
> >>>>>>>
> >>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
> >>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
> >>>>>>>
> >>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named
> recipients only.
> >>>>>>> It may contain privileged, confidential or copyright information.
> If you are
> >>>>>>> not the named recipient, any use, reliance upon, disclosure or
> copying of this
> >>>>>>> email or its attachments is unauthorised. If you have received
> this email in
> >>>>>>> error, please reply via email or call +64 21 0832 6348.
> >>>>>>>
> ------------------------------------------------------------------------------
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Regards,
> >>>>>
> >>>>>
> >>>>> Syed Ammad Ali
> >>>
> >>>
> >>>
> >>> --
> >>> Regards,
> >>>
> >>>
> >>> Syed Ammad Ali
> >
> > --
> > Regards,
> >
> >
> > Syed Ammad Ali
>
>
>
> --
> Mohammed Naser
> VEXXHOST, Inc.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/b1c978b7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 75170 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210825/b1c978b7/attachment-0001.png>