Open Stack

Hi Karera,

Login to master node and check the logs of heat agent in var log. There
must be something the cluster is stucking somewhere in creating.

Ammad

On Tue, Aug 24, 2021 at 3:41 PM Karera Tony <tonykarera at gmail.com> wrote:

> Hello Ammad,
>
> I had done as explained and it worked upto a certain point. The master
> node was created but the cluster remained in Creation in progress for over
> an hour and failed with error below
>
> Stack Faults
> as follows:
> default-master
> Timed out
> default-worker
> Timed out
>
>
> Regards
>
> Tony Karera
>
>
>
>
> On Tue, Aug 24, 2021 at 9:25 AM Ammad Syed <syedammad83 at gmail.com> wrote:
>
>> Hi Tony,
>>
>> You can try by creating your private vxlan network prior to deployment of
>> cluster and explicitly create your cluster in vxlan network.
>>
>> --fixed-network private --fixed-subnet private-subnet
>>
>> You can specify above while creating a cluster.
>>
>> Ammad
>>
>> On Tue, Aug 24, 2021 at 11:59 AM Karera Tony <tonykarera at gmail.com>
>> wrote:
>>
>>> Hello MOhamed,
>>>
>>> I think the Kubernetes cluster is ok but it when I deploy it, It creates
>>> a fixed network using vlan which I am not using for internal networks.
>>>
>>> When I create a a vxlan Network and use it in the cluster creation, It
>>> fails. Is there a trick around this ?
>>> Regards
>>>
>>> Tony Karera
>>>
>>>
>>>
>>>
>>> On Fri, Aug 20, 2021 at 9:00 AM feilong <feilong at catalyst.net.nz> wrote:
>>>
>>>> Oooh, are you using Swarm? I don't think that driver is well
>>>> maintained. I didn't see any interest in the last 4 years since I involved
>>>> in the Magnum project. If there is no specific reason, I would suggest go
>>>> for k8s.
>>>>
>>>>
>>>> On 20/08/21 5:08 pm, Mohammed Naser wrote:
>>>>
>>>> Please keep replies on list so others can help too.
>>>>
>>>> I don’t know how well tested the Swarm driver is at this point. I
>>>> believe most Magnum users are using it for Kubernetes only.
>>>>
>>>> On Fri, Aug 20, 2021 at 1:05 AM Karera Tony <tonykarera at gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Naser,
>>>>>
>>>>> Please check below.
>>>>>
>>>>> openstack coe cluster template create swarm-cluster-template1 \
>>>>>                      --image fedora-atomic-latest \
>>>>>                      --external-network External_1700\
>>>>>                      --dns-nameserver 8.8.8.8 \
>>>>>                      --master-flavor m1.small \
>>>>>                      --flavor m1.small \
>>>>>                      --coe swarm
>>>>> openstack coe cluster create swarm-cluster \
>>>>>                         --cluster-template swarm-cluster-template \
>>>>>                         --master-count 1 \
>>>>>                         --node-count 2 \
>>>>>                         --keypair Newkey
>>>>>
>>>>> Regards
>>>>>
>>>>> Tony Karera
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Aug 20, 2021 at 7:03 AM Mohammed Naser <mnaser at vexxhost.com>
>>>>> wrote:
>>>>>
>>>>>> What does your cluster template and cluster create command look like?
>>>>>>
>>>>>> On Fri, Aug 20, 2021 at 12:59 AM Karera Tony <tonykarera at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Wang,
>>>>>>>
>>>>>>> Thanks for the feedback.
>>>>>>>
>>>>>>> Unfortunately Octavia is not deployed in my environment (at least
>>>>>>> not yet) and LB is not enabled on either the cluster template or the
>>>>>>> cluster itself.
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> Tony Karera
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Aug 20, 2021 at 6:52 AM feilong <feilong at catalyst.net.nz>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi Karera,
>>>>>>>>
>>>>>>>> It's probably a bug. If you do have Octavia deployed, can you try
>>>>>>>> to not disable the LB and see how it goes?
>>>>>>>>
>>>>>>>>
>>>>>>>> On 20/08/21 4:18 pm, Karera Tony wrote:
>>>>>>>>
>>>>>>>> Hello Team,
>>>>>>>>
>>>>>>>> I deployed Openstack Wallby on Ubuntu20 and enabled Magum, however
>>>>>>>> when I create a cluster I get the error below.
>>>>>>>>
>>>>>>>>
>>>>>>>> *Status Reason ERROR: Property error: :
>>>>>>>> resources.api_lb.properties: : Property allowed_cidrs not assigned*
>>>>>>>> Can someone advise on where I could be wrong. Btw, I disabled load
>>>>>>>> balancer while creating the cluster.
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Tony Karera
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Cheers & Best regards,
>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>> Feilong Wang (王飞龙) (he/him)
>>>>>>>> Head of Research & Development
>>>>>>>>
>>>>>>>> Catalyst Cloud
>>>>>>>> Aotearoa's own
>>>>>>>>
>>>>>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>>>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand <https://www.google.com/maps/search/150+Willis+Street,+Wellington+6011,+New+Zealand?entry=gmail&source=g>
>>>>>>>>
>>>>>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>>>>>> It may contain privileged, confidential or copyright information. If you are
>>>>>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>>>>>> email or its attachments is unauthorised. If you have received this email in
>>>>>>>> error, please reply via email or call +64 21 0832 6348.
>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>
>>>>>>>> --
>>>>>> Mohammed Naser
>>>>>> VEXXHOST, Inc.
>>>>>>
>>>>> --
>>>> Mohammed Naser
>>>> VEXXHOST, Inc.
>>>>
>>>> --
>>>> Cheers & Best regards,
>>>> ------------------------------------------------------------------------------
>>>> Feilong Wang (王飞龙) (he/him)
>>>> Head of Research & Development
>>>>
>>>> Catalyst Cloud
>>>> Aotearoa's own
>>>>
>>>> Mob: +64 21 0832 6348 | www.catalystcloud.nz
>>>> Level 6, 150 Willis Street, Wellington 6011, New Zealand
>>>>
>>>> CONFIDENTIALITY NOTICE: This email is intended for the named recipients only.
>>>> It may contain privileged, confidential or copyright information. If you are
>>>> not the named recipient, any use, reliance upon, disclosure or copying of this
>>>> email or its attachments is unauthorised. If you have received this email in
>>>> error, please reply via email or call +64 21 0832 6348.
>>>> ------------------------------------------------------------------------------
>>>>
>>>>
>>
>> --
>> Regards,
>>
>>
>> Syed Ammad Ali
>>
>

-- 
Regards,


Syed Ammad Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-discuss/attachments/20210824/b77d9d12/attachment-0001.html>